diff options
Diffstat (limited to 'drivers/net/phy/microchip.c')
| -rw-r--r-- | drivers/net/phy/microchip.c | 433 |
1 files changed, 390 insertions, 43 deletions
diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c index 37ee856c7680..dc8634e7bcbe 100644 --- a/drivers/net/phy/microchip.c +++ b/drivers/net/phy/microchip.c @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2015 Microchip Technology - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. */ #include <linux/kernel.h> #include <linux/module.h> @@ -20,9 +8,18 @@ #include <linux/ethtool.h> #include <linux/phy.h> #include <linux/microchipphy.h> +#include <linux/delay.h> +#include <linux/of.h> +#include <dt-bindings/net/microchip-lan78xx.h> + +#define PHY_ID_LAN937X_TX 0x0007c190 + +#define LAN937X_MODE_CTRL_STATUS_REG 0x11 +#define LAN937X_AUTOMDIX_EN BIT(7) +#define LAN937X_MDI_MODE BIT(6) #define DRIVER_AUTHOR "WOOJUNG HUH <woojung.huh@microchip.com>" -#define DRIVER_DESC "Microchip LAN88XX PHY driver" +#define DRIVER_DESC "Microchip LAN88XX/LAN937X TX PHY driver" struct lan88xx_priv { int chip_id; @@ -30,29 +27,14 @@ struct lan88xx_priv { __u32 wolopts; }; -static int lan88xx_phy_config_intr(struct phy_device *phydev) +static int lan88xx_read_page(struct phy_device *phydev) { - int rc; - - if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { - /* unmask all source and clear them before enable */ - rc = phy_write(phydev, LAN88XX_INT_MASK, 0x7FFF); - rc = phy_read(phydev, LAN88XX_INT_STS); - rc = phy_write(phydev, LAN88XX_INT_MASK, - LAN88XX_INT_MASK_MDINTPIN_EN_ | - LAN88XX_INT_MASK_LINK_CHANGE_); - } else { - rc = phy_write(phydev, LAN88XX_INT_MASK, 0); - } - - return rc < 0 ? rc : 0; + return __phy_read(phydev, LAN88XX_EXT_PAGE_ACCESS); } -static int lan88xx_phy_ack_interrupt(struct phy_device *phydev) +static int lan88xx_write_page(struct phy_device *phydev, int page) { - int rc = phy_read(phydev, LAN88XX_INT_STS); - - return rc < 0 ? rc : 0; + return __phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, page); } static int lan88xx_suspend(struct phy_device *phydev) @@ -66,10 +48,157 @@ static int lan88xx_suspend(struct phy_device *phydev) return 0; } +static int lan88xx_TR_reg_set(struct phy_device *phydev, u16 regaddr, + u32 data) +{ + int val, save_page, ret = 0; + u16 buf; + + /* Save current page */ + save_page = phy_save_page(phydev); + if (save_page < 0) { + phydev_warn(phydev, "Failed to get current page\n"); + goto err; + } + + /* Switch to TR page */ + lan88xx_write_page(phydev, LAN88XX_EXT_PAGE_ACCESS_TR); + + ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_LOW_DATA, + (data & 0xFFFF)); + if (ret < 0) { + phydev_warn(phydev, "Failed to write TR low data\n"); + goto err; + } + + ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_HIGH_DATA, + (data & 0x00FF0000) >> 16); + if (ret < 0) { + phydev_warn(phydev, "Failed to write TR high data\n"); + goto err; + } + + /* Config control bits [15:13] of register */ + buf = (regaddr & ~(0x3 << 13));/* Clr [14:13] to write data in reg */ + buf |= 0x8000; /* Set [15] to Packet transmit */ + + ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_CR, buf); + if (ret < 0) { + phydev_warn(phydev, "Failed to write data in reg\n"); + goto err; + } + + usleep_range(1000, 2000);/* Wait for Data to be written */ + val = __phy_read(phydev, LAN88XX_EXT_PAGE_TR_CR); + if (!(val & 0x8000)) + phydev_warn(phydev, "TR Register[0x%X] configuration failed\n", + regaddr); +err: + return phy_restore_page(phydev, save_page, ret); +} + +static void lan88xx_config_TR_regs(struct phy_device *phydev) +{ + int err; + + /* Get access to Channel 0x1, Node 0xF , Register 0x01. + * Write 24-bit value 0x12B00A to register. Setting MrvlTrFix1000Kf, + * MrvlTrFix1000Kp, MasterEnableTR bits. + */ + err = lan88xx_TR_reg_set(phydev, 0x0F82, 0x12B00A); + if (err < 0) + phydev_warn(phydev, "Failed to Set Register[0x0F82]\n"); + + /* Get access to Channel b'10, Node b'1101, Register 0x06. + * Write 24-bit value 0xD2C46F to register. Setting SSTrKf1000Slv, + * SSTrKp1000Mas bits. + */ + err = lan88xx_TR_reg_set(phydev, 0x168C, 0xD2C46F); + if (err < 0) + phydev_warn(phydev, "Failed to Set Register[0x168C]\n"); + + /* Get access to Channel b'10, Node b'1111, Register 0x11. + * Write 24-bit value 0x620 to register. Setting rem_upd_done_thresh + * bits + */ + err = lan88xx_TR_reg_set(phydev, 0x17A2, 0x620); + if (err < 0) + phydev_warn(phydev, "Failed to Set Register[0x17A2]\n"); + + /* Get access to Channel b'10, Node b'1101, Register 0x10. + * Write 24-bit value 0xEEFFDD to register. Setting + * eee_TrKp1Long_1000, eee_TrKp2Long_1000, eee_TrKp3Long_1000, + * eee_TrKp1Short_1000,eee_TrKp2Short_1000, eee_TrKp3Short_1000 bits. + */ + err = lan88xx_TR_reg_set(phydev, 0x16A0, 0xEEFFDD); + if (err < 0) + phydev_warn(phydev, "Failed to Set Register[0x16A0]\n"); + + /* Get access to Channel b'10, Node b'1101, Register 0x13. + * Write 24-bit value 0x071448 to register. Setting + * slv_lpi_tr_tmr_val1, slv_lpi_tr_tmr_val2 bits. + */ + err = lan88xx_TR_reg_set(phydev, 0x16A6, 0x071448); + if (err < 0) + phydev_warn(phydev, "Failed to Set Register[0x16A6]\n"); + + /* Get access to Channel b'10, Node b'1101, Register 0x12. + * Write 24-bit value 0x13132F to register. Setting + * slv_sigdet_timer_val1, slv_sigdet_timer_val2 bits. + */ + err = lan88xx_TR_reg_set(phydev, 0x16A4, 0x13132F); + if (err < 0) + phydev_warn(phydev, "Failed to Set Register[0x16A4]\n"); + + /* Get access to Channel b'10, Node b'1101, Register 0x14. + * Write 24-bit value 0x0 to register. Setting eee_3level_delay, + * eee_TrKf_freeze_delay bits. + */ + err = lan88xx_TR_reg_set(phydev, 0x16A8, 0x0); + if (err < 0) + phydev_warn(phydev, "Failed to Set Register[0x16A8]\n"); + + /* Get access to Channel b'01, Node b'1111, Register 0x34. + * Write 24-bit value 0x91B06C to register. Setting + * FastMseSearchThreshLong1000, FastMseSearchThreshShort1000, + * FastMseSearchUpdGain1000 bits. + */ + err = lan88xx_TR_reg_set(phydev, 0x0FE8, 0x91B06C); + if (err < 0) + phydev_warn(phydev, "Failed to Set Register[0x0FE8]\n"); + + /* Get access to Channel b'01, Node b'1111, Register 0x3E. + * Write 24-bit value 0xC0A028 to register. Setting + * FastMseKp2ThreshLong1000, FastMseKp2ThreshShort1000, + * FastMseKp2UpdGain1000, FastMseKp2ExitEn1000 bits. + */ + err = lan88xx_TR_reg_set(phydev, 0x0FFC, 0xC0A028); + if (err < 0) + phydev_warn(phydev, "Failed to Set Register[0x0FFC]\n"); + + /* Get access to Channel b'01, Node b'1111, Register 0x35. + * Write 24-bit value 0x041600 to register. Setting + * FastMseSearchPhShNum1000, FastMseSearchClksPerPh1000, + * FastMsePhChangeDelay1000 bits. + */ + err = lan88xx_TR_reg_set(phydev, 0x0FEA, 0x041600); + if (err < 0) + phydev_warn(phydev, "Failed to Set Register[0x0FEA]\n"); + + /* Get access to Channel b'10, Node b'1101, Register 0x03. + * Write 24-bit value 0x000004 to register. Setting TrFreeze bits. + */ + err = lan88xx_TR_reg_set(phydev, 0x1686, 0x000004); + if (err < 0) + phydev_warn(phydev, "Failed to Set Register[0x1686]\n"); +} + static int lan88xx_probe(struct phy_device *phydev) { struct device *dev = &phydev->mdio.dev; struct lan88xx_priv *priv; + u32 led_modes[4]; + int len; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) @@ -77,6 +206,27 @@ static int lan88xx_probe(struct phy_device *phydev) priv->wolopts = 0; + len = of_property_read_variable_u32_array(dev->of_node, + "microchip,led-modes", + led_modes, + 0, + ARRAY_SIZE(led_modes)); + if (len >= 0) { + u32 reg = 0; + int i; + + for (i = 0; i < len; i++) { + if (led_modes[i] > 15) + return -EINVAL; + reg |= led_modes[i] << (i * 4); + } + for (; i < ARRAY_SIZE(led_modes); i++) + reg |= LAN78XX_FORCE_LED_OFF << (i * 4); + (void)phy_write(phydev, LAN78XX_PHY_LED_MODE_SELECT, reg); + } else if (len == -EOVERFLOW) { + return -EINVAL; + } + /* these values can be used to identify internal PHY */ priv->chip_id = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_ID); priv->chip_rev = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_REV); @@ -132,6 +282,24 @@ static void lan88xx_set_mdix(struct phy_device *phydev) phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, LAN88XX_EXT_PAGE_SPACE_0); } +static int lan88xx_config_init(struct phy_device *phydev) +{ + int val; + + /*Zerodetect delay enable */ + val = phy_read_mmd(phydev, MDIO_MMD_PCS, + PHY_ARDENNES_MMD_DEV_3_PHY_CFG); + val |= PHY_ARDENNES_MMD_DEV_3_PHY_CFG_ZD_DLY_EN_; + + phy_write_mmd(phydev, MDIO_MMD_PCS, PHY_ARDENNES_MMD_DEV_3_PHY_CFG, + val); + + /* Config DSP registers */ + lan88xx_config_TR_regs(phydev); + + return 0; +} + static int lan88xx_config_aneg(struct phy_device *phydev) { lan88xx_set_mdix(phydev); @@ -139,34 +307,213 @@ static int lan88xx_config_aneg(struct phy_device *phydev) return genphy_config_aneg(phydev); } +static void lan88xx_link_change_notify(struct phy_device *phydev) +{ + int temp; + int ret; + + /* Reset PHY to ensure MII_LPA provides up-to-date information. This + * issue is reproducible only after parallel detection, as described + * in IEEE 802.3-2022, Section 28.2.3.1 ("Parallel detection function"), + * where the link partner does not support auto-negotiation. + */ + if (phydev->state == PHY_NOLINK) { + ret = phy_init_hw(phydev); + if (ret < 0) + goto link_change_notify_failed; + + ret = _phy_start_aneg(phydev); + if (ret < 0) + goto link_change_notify_failed; + } + + /* At forced 100 F/H mode, chip may fail to set mode correctly + * when cable is switched between long(~50+m) and short one. + * As workaround, set to 10 before setting to 100 + * at forced 100 F/H mode. + */ + if (phydev->state == PHY_NOLINK && !phydev->autoneg && phydev->speed == 100) { + /* disable phy interrupt */ + temp = phy_read(phydev, LAN88XX_INT_MASK); + temp &= ~LAN88XX_INT_MASK_MDINTPIN_EN_; + phy_write(phydev, LAN88XX_INT_MASK, temp); + + temp = phy_read(phydev, MII_BMCR); + temp &= ~(BMCR_SPEED100 | BMCR_SPEED1000); + phy_write(phydev, MII_BMCR, temp); /* set to 10 first */ + temp |= BMCR_SPEED100; + phy_write(phydev, MII_BMCR, temp); /* set to 100 later */ + + /* clear pending interrupt generated while workaround */ + temp = phy_read(phydev, LAN88XX_INT_STS); + + /* enable phy interrupt back */ + temp = phy_read(phydev, LAN88XX_INT_MASK); + temp |= LAN88XX_INT_MASK_MDINTPIN_EN_; + phy_write(phydev, LAN88XX_INT_MASK, temp); + } + + return; + +link_change_notify_failed: + phydev_err(phydev, "Link change process failed %pe\n", ERR_PTR(ret)); +} + +/** + * lan937x_tx_read_mdix_status - Read the MDIX status for the LAN937x TX PHY. + * @phydev: Pointer to the phy_device structure. + * + * This function reads the MDIX status of the LAN937x TX PHY and sets the + * mdix_ctrl and mdix fields of the phy_device structure accordingly. + * Note that MDIX status is not supported in AUTO mode, and will be set + * to invalid in such cases. + * + * Return: 0 on success, a negative error code on failure. + */ +static int lan937x_tx_read_mdix_status(struct phy_device *phydev) +{ + int ret; + + ret = phy_read(phydev, LAN937X_MODE_CTRL_STATUS_REG); + if (ret < 0) + return ret; + + if (ret & LAN937X_AUTOMDIX_EN) { + phydev->mdix_ctrl = ETH_TP_MDI_AUTO; + /* MDI/MDIX status is unknown */ + phydev->mdix = ETH_TP_MDI_INVALID; + } else if (ret & LAN937X_MDI_MODE) { + phydev->mdix_ctrl = ETH_TP_MDI_X; + phydev->mdix = ETH_TP_MDI_X; + } else { + phydev->mdix_ctrl = ETH_TP_MDI; + phydev->mdix = ETH_TP_MDI; + } + + return 0; +} + +/** + * lan937x_tx_read_status - Read the status for the LAN937x TX PHY. + * @phydev: Pointer to the phy_device structure. + * + * This function reads the status of the LAN937x TX PHY and updates the + * phy_device structure accordingly. + * + * Return: 0 on success, a negative error code on failure. + */ +static int lan937x_tx_read_status(struct phy_device *phydev) +{ + int ret; + + ret = genphy_read_status(phydev); + if (ret < 0) + return ret; + + return lan937x_tx_read_mdix_status(phydev); +} + +/** + * lan937x_tx_set_mdix - Set the MDIX mode for the LAN937x TX PHY. + * @phydev: Pointer to the phy_device structure. + * + * This function configures the MDIX mode of the LAN937x TX PHY based on the + * mdix_ctrl field of the phy_device structure. The MDIX mode can be set to + * MDI (straight-through), MDIX (crossover), or AUTO (auto-MDIX). If the mode + * is not recognized, it returns 0 without making any changes. + * + * Return: 0 on success, a negative error code on failure. + */ +static int lan937x_tx_set_mdix(struct phy_device *phydev) +{ + u16 val; + + switch (phydev->mdix_ctrl) { + case ETH_TP_MDI: + val = 0; + break; + case ETH_TP_MDI_X: + val = LAN937X_MDI_MODE; + break; + case ETH_TP_MDI_AUTO: + val = LAN937X_AUTOMDIX_EN; + break; + default: + return 0; + } + + return phy_modify(phydev, LAN937X_MODE_CTRL_STATUS_REG, + LAN937X_AUTOMDIX_EN | LAN937X_MDI_MODE, val); +} + +/** + * lan937x_tx_config_aneg - Configure auto-negotiation and fixed modes for the + * LAN937x TX PHY. + * @phydev: Pointer to the phy_device structure. + * + * This function configures the MDIX mode for the LAN937x TX PHY and then + * proceeds to configure the auto-negotiation or fixed mode settings + * based on the phy_device structure. + * + * Return: 0 on success, a negative error code on failure. + */ +static int lan937x_tx_config_aneg(struct phy_device *phydev) +{ + int ret; + + ret = lan937x_tx_set_mdix(phydev); + if (ret < 0) + return ret; + + return genphy_config_aneg(phydev); +} + static struct phy_driver microchip_phy_driver[] = { { - .phy_id = 0x0007c130, - .phy_id_mask = 0xfffffff0, + .phy_id = 0x0007c132, + /* This mask (0xfffffff2) is to differentiate from + * LAN8742 (phy_id 0x0007c130 and 0x0007c131) + * and allows future phy_id revisions. + * These PHYs are integrated in LAN7800 and LAN7850 USB/Ethernet + * controllers. + */ + .phy_id_mask = 0xfffffff2, .name = "Microchip LAN88xx", - .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_INTERRUPT, + /* PHY_GBIT_FEATURES */ .probe = lan88xx_probe, .remove = lan88xx_remove, - .config_init = genphy_config_init, + .config_init = lan88xx_config_init, .config_aneg = lan88xx_config_aneg, - .read_status = genphy_read_status, + .link_change_notify = lan88xx_link_change_notify, + .soft_reset = genphy_soft_reset, - .ack_interrupt = lan88xx_phy_ack_interrupt, - .config_intr = lan88xx_phy_config_intr, + /* Interrupt handling is broken, do not define related + * functions to force polling. + */ .suspend = lan88xx_suspend, .resume = genphy_resume, .set_wol = lan88xx_set_wol, + .read_page = lan88xx_read_page, + .write_page = lan88xx_write_page, +}, +{ + PHY_ID_MATCH_MODEL(PHY_ID_LAN937X_TX), + .name = "Microchip LAN937x TX", + .suspend = genphy_suspend, + .resume = genphy_resume, + .config_aneg = lan937x_tx_config_aneg, + .read_status = lan937x_tx_read_status, } }; module_phy_driver(microchip_phy_driver); -static struct mdio_device_id __maybe_unused microchip_tbl[] = { - { 0x0007c130, 0xfffffff0 }, +static const struct mdio_device_id __maybe_unused microchip_tbl[] = { + { 0x0007c132, 0xfffffff2 }, + { PHY_ID_MATCH_MODEL(PHY_ID_LAN937X_TX) }, { } }; |