diff options
Diffstat (limited to 'drivers/net/phy/microchip_t1s.c')
| -rw-r--r-- | drivers/net/phy/microchip_t1s.c | 300 |
1 files changed, 238 insertions, 62 deletions
diff --git a/drivers/net/phy/microchip_t1s.c b/drivers/net/phy/microchip_t1s.c index 3614839a8e51..75d291154b4c 100644 --- a/drivers/net/phy/microchip_t1s.c +++ b/drivers/net/phy/microchip_t1s.c @@ -3,8 +3,8 @@ * Driver for Microchip 10BASE-T1S PHYs * * Support: Microchip Phys: - * lan8670/1/2 Rev.B1 - * lan8650/1 Rev.B0 Internal PHYs + * lan8670/1/2 Rev.B1/C1/C2 + * lan8650/1 Rev.B0/B1 Internal PHYs */ #include <linux/kernel.h> @@ -12,7 +12,10 @@ #include <linux/phy.h> #define PHY_ID_LAN867X_REVB1 0x0007C162 -#define PHY_ID_LAN865X_REVB0 0x0007C1B3 +#define PHY_ID_LAN867X_REVC1 0x0007C164 +#define PHY_ID_LAN867X_REVC2 0x0007C165 +/* Both Rev.B0 and B1 clause 22 PHYID's are same due to B1 chip limitation */ +#define PHY_ID_LAN865X_REVB 0x0007C1B3 #define LAN867X_REG_STS2 0x0019 @@ -23,6 +26,12 @@ #define LAN865X_REG_CFGPARAM_CTRL 0x00DA #define LAN865X_REG_STS2 0x0019 +/* Collision Detector Control 0 Register */ +#define LAN86XX_REG_COL_DET_CTRL0 0x0087 +#define COL_DET_CTRL0_ENABLE_BIT_MASK BIT(15) +#define COL_DET_ENABLE BIT(15) +#define COL_DET_DISABLE 0x0000 + #define LAN865X_CFGPARAM_READ_ENABLE BIT(1) /* The arrays below are pulled from the following table from AN1699 @@ -59,29 +68,45 @@ static const u16 lan867x_revb1_fixup_masks[12] = { 0x0600, 0x7F00, 0x2000, 0xFFFF, }; -/* LAN865x Rev.B0 configuration parameters from AN1760 */ -static const u32 lan865x_revb0_fixup_registers[28] = { - 0x0091, 0x0081, 0x0043, 0x0044, - 0x0045, 0x0053, 0x0054, 0x0055, - 0x0040, 0x0050, 0x00D0, 0x00E9, - 0x00F5, 0x00F4, 0x00F8, 0x00F9, +/* LAN865x Rev.B0/B1 configuration parameters from AN1760 + * As per the Configuration Application Note AN1760 published in the below link, + * https://www.microchip.com/en-us/application-notes/an1760 + * Revision F (DS60001760G - June 2024) + */ +static const u32 lan865x_revb_fixup_registers[17] = { + 0x00D0, 0x00E0, 0x00E9, 0x00F5, + 0x00F4, 0x00F8, 0x00F9, 0x0081, + 0x0091, 0x0043, 0x0044, 0x0045, + 0x0053, 0x0054, 0x0055, 0x0040, + 0x0050, +}; + +static const u16 lan865x_revb_fixup_values[17] = { + 0x3F31, 0xC000, 0x9E50, 0x1CF8, + 0xC020, 0xB900, 0x4E53, 0x0080, + 0x9660, 0x00FF, 0xFFFF, 0x0000, + 0x00FF, 0xFFFF, 0x0000, 0x0002, + 0x0002, +}; + +static const u16 lan865x_revb_fixup_cfg_regs[2] = { + 0x0084, 0x008A, +}; + +static const u32 lan865x_revb_sqi_fixup_regs[12] = { 0x00B0, 0x00B1, 0x00B2, 0x00B3, 0x00B4, 0x00B5, 0x00B6, 0x00B7, 0x00B8, 0x00B9, 0x00BA, 0x00BB, }; -static const u16 lan865x_revb0_fixup_values[28] = { - 0x9660, 0x00C0, 0x00FF, 0xFFFF, - 0x0000, 0x00FF, 0xFFFF, 0x0000, - 0x0002, 0x0002, 0x5F21, 0x9E50, - 0x1CF8, 0xC020, 0x9B00, 0x4E53, +static const u16 lan865x_revb_sqi_fixup_values[12] = { 0x0103, 0x0910, 0x1D26, 0x002A, 0x0103, 0x070D, 0x1720, 0x0027, 0x0509, 0x0E13, 0x1C25, 0x002B, }; -static const u16 lan865x_revb0_fixup_cfg_regs[5] = { - 0x0084, 0x008A, 0x00AD, 0x00AE, 0x00AF +static const u16 lan865x_revb_sqi_fixup_cfg_regs[3] = { + 0x00AD, 0x00AE, 0x00AF, }; /* Pulled from AN1760 describing 'indirect read' @@ -92,7 +117,7 @@ static const u16 lan865x_revb0_fixup_cfg_regs[5] = { * * 0x4 refers to memory map selector 4, which maps to MDIO_MMD_VEND2 */ -static int lan865x_revb0_indirect_read(struct phy_device *phydev, u16 addr) +static int lan865x_revb_indirect_read(struct phy_device *phydev, u16 addr) { int ret; @@ -112,15 +137,18 @@ static int lan865x_revb0_indirect_read(struct phy_device *phydev, u16 addr) /* This is pulled straight from AN1760 from 'calculation of offset 1' & * 'calculation of offset 2' */ -static int lan865x_generate_cfg_offsets(struct phy_device *phydev, s8 offsets[2]) +static int lan865x_generate_cfg_offsets(struct phy_device *phydev, s8 offsets[]) { const u16 fixup_regs[2] = {0x0004, 0x0008}; int ret; for (int i = 0; i < ARRAY_SIZE(fixup_regs); i++) { - ret = lan865x_revb0_indirect_read(phydev, fixup_regs[i]); + ret = lan865x_revb_indirect_read(phydev, fixup_regs[i]); if (ret < 0) return ret; + + /* 5-bit signed value, sign extend */ + ret &= GENMASK(4, 0); if (ret & BIT(4)) offsets[i] = ret | 0xE0; else @@ -130,13 +158,15 @@ static int lan865x_generate_cfg_offsets(struct phy_device *phydev, s8 offsets[2] return 0; } -static int lan865x_read_cfg_params(struct phy_device *phydev, u16 cfg_params[]) +static int lan865x_read_cfg_params(struct phy_device *phydev, + const u16 cfg_regs[], u16 cfg_params[], + u8 count) { int ret; - for (int i = 0; i < ARRAY_SIZE(lan865x_revb0_fixup_cfg_regs); i++) { + for (int i = 0; i < count; i++) { ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, - lan865x_revb0_fixup_cfg_regs[i]); + cfg_regs[i]); if (ret < 0) return ret; cfg_params[i] = (u16)ret; @@ -145,13 +175,14 @@ static int lan865x_read_cfg_params(struct phy_device *phydev, u16 cfg_params[]) return 0; } -static int lan865x_write_cfg_params(struct phy_device *phydev, u16 cfg_params[]) +static int lan865x_write_cfg_params(struct phy_device *phydev, + const u16 cfg_regs[], u16 cfg_params[], + u8 count) { int ret; - for (int i = 0; i < ARRAY_SIZE(lan865x_revb0_fixup_cfg_regs); i++) { - ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, - lan865x_revb0_fixup_cfg_regs[i], + for (int i = 0; i < count; i++) { + ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, cfg_regs[i], cfg_params[i]); if (ret) return ret; @@ -160,60 +191,90 @@ static int lan865x_write_cfg_params(struct phy_device *phydev, u16 cfg_params[]) return 0; } -static int lan865x_setup_cfgparam(struct phy_device *phydev) +static int lan865x_setup_cfgparam(struct phy_device *phydev, s8 offsets[]) { - u16 cfg_params[ARRAY_SIZE(lan865x_revb0_fixup_cfg_regs)]; - u16 cfg_results[5]; - s8 offsets[2]; + u16 cfg_results[ARRAY_SIZE(lan865x_revb_fixup_cfg_regs)]; + u16 cfg_params[ARRAY_SIZE(lan865x_revb_fixup_cfg_regs)]; int ret; - ret = lan865x_generate_cfg_offsets(phydev, offsets); + ret = lan865x_read_cfg_params(phydev, lan865x_revb_fixup_cfg_regs, + cfg_params, ARRAY_SIZE(cfg_params)); if (ret) return ret; - ret = lan865x_read_cfg_params(phydev, cfg_params); + cfg_results[0] = FIELD_PREP(GENMASK(15, 10), 9 + offsets[0]) | + FIELD_PREP(GENMASK(9, 4), 14 + offsets[0]) | + 0x03; + cfg_results[1] = FIELD_PREP(GENMASK(15, 10), 40 + offsets[1]); + + return lan865x_write_cfg_params(phydev, lan865x_revb_fixup_cfg_regs, + cfg_results, ARRAY_SIZE(cfg_results)); +} + +static int lan865x_setup_sqi_cfgparam(struct phy_device *phydev, s8 offsets[]) +{ + u16 cfg_results[ARRAY_SIZE(lan865x_revb_sqi_fixup_cfg_regs)]; + u16 cfg_params[ARRAY_SIZE(lan865x_revb_sqi_fixup_cfg_regs)]; + int ret; + + ret = lan865x_read_cfg_params(phydev, lan865x_revb_sqi_fixup_cfg_regs, + cfg_params, ARRAY_SIZE(cfg_params)); if (ret) return ret; - cfg_results[0] = (cfg_params[0] & 0x000F) | - FIELD_PREP(GENMASK(15, 10), 9 + offsets[0]) | - FIELD_PREP(GENMASK(15, 4), 14 + offsets[0]); - cfg_results[1] = (cfg_params[1] & 0x03FF) | - FIELD_PREP(GENMASK(15, 10), 40 + offsets[1]); - cfg_results[2] = (cfg_params[2] & 0xC0C0) | - FIELD_PREP(GENMASK(15, 8), 5 + offsets[0]) | - (9 + offsets[0]); - cfg_results[3] = (cfg_params[3] & 0xC0C0) | - FIELD_PREP(GENMASK(15, 8), 9 + offsets[0]) | - (14 + offsets[0]); - cfg_results[4] = (cfg_params[4] & 0xC0C0) | - FIELD_PREP(GENMASK(15, 8), 17 + offsets[0]) | - (22 + offsets[0]); - - return lan865x_write_cfg_params(phydev, cfg_results); + cfg_results[0] = FIELD_PREP(GENMASK(13, 8), 5 + offsets[0]) | + (9 + offsets[0]); + cfg_results[1] = FIELD_PREP(GENMASK(13, 8), 9 + offsets[0]) | + (14 + offsets[0]); + cfg_results[2] = FIELD_PREP(GENMASK(13, 8), 17 + offsets[0]) | + (22 + offsets[0]); + + return lan865x_write_cfg_params(phydev, lan865x_revb_sqi_fixup_cfg_regs, + cfg_results, ARRAY_SIZE(cfg_results)); } -static int lan865x_revb0_config_init(struct phy_device *phydev) +static int lan865x_revb_config_init(struct phy_device *phydev) { + s8 offsets[2]; int ret; /* Reference to AN1760 * https://ww1.microchip.com/downloads/aemDocuments/documents/AIS/ProductDocuments/SupportingCollateral/AN-LAN8650-1-Configuration-60001760.pdf */ - for (int i = 0; i < ARRAY_SIZE(lan865x_revb0_fixup_registers); i++) { + ret = lan865x_generate_cfg_offsets(phydev, offsets); + if (ret) + return ret; + + for (int i = 0; i < ARRAY_SIZE(lan865x_revb_fixup_registers); i++) { ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, - lan865x_revb0_fixup_registers[i], - lan865x_revb0_fixup_values[i]); + lan865x_revb_fixup_registers[i], + lan865x_revb_fixup_values[i]); if (ret) return ret; + + if (i == 1) { + ret = lan865x_setup_cfgparam(phydev, offsets); + if (ret) + return ret; + } } - /* Function to calculate and write the configuration parameters in the - * 0x0084, 0x008A, 0x00AD, 0x00AE and 0x00AF registers (from AN1760) - */ - return lan865x_setup_cfgparam(phydev); + + ret = lan865x_setup_sqi_cfgparam(phydev, offsets); + if (ret) + return ret; + + for (int i = 0; i < ARRAY_SIZE(lan865x_revb_sqi_fixup_regs); i++) { + ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, + lan865x_revb_sqi_fixup_regs[i], + lan865x_revb_sqi_fixup_values[i]); + if (ret) + return ret; + } + + return 0; } -static int lan867x_revb1_config_init(struct phy_device *phydev) +static int lan867x_check_reset_complete(struct phy_device *phydev) { int err; @@ -235,6 +296,69 @@ static int lan867x_revb1_config_init(struct phy_device *phydev) } } + return 0; +} + +static int lan867x_revc_config_init(struct phy_device *phydev) +{ + s8 offsets[2]; + int ret; + + ret = lan867x_check_reset_complete(phydev); + if (ret) + return ret; + + ret = lan865x_generate_cfg_offsets(phydev, offsets); + if (ret) + return ret; + + /* LAN867x Rev.C1/C2 configuration settings are equal to the first 9 + * configuration settings and all the sqi fixup settings from LAN865x + * Rev.B0/B1. So the same fixup registers and values from LAN865x + * Rev.B0/B1 are used for LAN867x Rev.C1/C2 to avoid duplication. + * Refer the below links for the comparison. + * https://www.microchip.com/en-us/application-notes/an1760 + * Revision F (DS60001760G - June 2024) + * https://www.microchip.com/en-us/application-notes/an1699 + * Revision E (DS60001699F - June 2024) + */ + for (int i = 0; i < 9; i++) { + ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, + lan865x_revb_fixup_registers[i], + lan865x_revb_fixup_values[i]); + if (ret) + return ret; + + if (i == 1) { + ret = lan865x_setup_cfgparam(phydev, offsets); + if (ret) + return ret; + } + } + + ret = lan865x_setup_sqi_cfgparam(phydev, offsets); + if (ret) + return ret; + + for (int i = 0; i < ARRAY_SIZE(lan865x_revb_sqi_fixup_regs); i++) { + ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, + lan865x_revb_sqi_fixup_regs[i], + lan865x_revb_sqi_fixup_values[i]); + if (ret) + return ret; + } + + return 0; +} + +static int lan867x_revb1_config_init(struct phy_device *phydev) +{ + int err; + + err = lan867x_check_reset_complete(phydev); + if (err) + return err; + /* Reference to AN1699 * https://ww1.microchip.com/downloads/aemDocuments/documents/AIS/ProductDocuments/SupportingCollateral/AN-LAN8670-1-2-config-60001699.pdf * AN1699 says Read, Modify, Write, but the Write is not required if the @@ -253,6 +377,36 @@ static int lan867x_revb1_config_init(struct phy_device *phydev) return 0; } +/* As per LAN8650/1 Rev.B0/B1 AN1760 (Revision F (DS60001760G - June 2024)) and + * LAN8670/1/2 Rev.C1/C2 AN1699 (Revision E (DS60001699F - June 2024)), under + * normal operation, the device should be operated in PLCA mode. Disabling + * collision detection is recommended to allow the device to operate in noisy + * environments or when reflections and other inherent transmission line + * distortion cause poor signal quality. Collision detection must be re-enabled + * if the device is configured to operate in CSMA/CD mode. + * + * AN1760: https://www.microchip.com/en-us/application-notes/an1760 + * AN1699: https://www.microchip.com/en-us/application-notes/an1699 + */ +static int lan86xx_plca_set_cfg(struct phy_device *phydev, + const struct phy_plca_cfg *plca_cfg) +{ + int ret; + + ret = genphy_c45_plca_set_cfg(phydev, plca_cfg); + if (ret) + return ret; + + if (plca_cfg->enabled) + return phy_modify_mmd(phydev, MDIO_MMD_VEND2, + LAN86XX_REG_COL_DET_CTRL0, + COL_DET_CTRL0_ENABLE_BIT_MASK, + COL_DET_DISABLE); + + return phy_modify_mmd(phydev, MDIO_MMD_VEND2, LAN86XX_REG_COL_DET_CTRL0, + COL_DET_CTRL0_ENABLE_BIT_MASK, COL_DET_ENABLE); +} + static int lan86xx_read_status(struct phy_device *phydev) { /* The phy has some limitations, namely: @@ -308,15 +462,35 @@ static struct phy_driver microchip_t1s_driver[] = { .get_plca_status = genphy_c45_plca_get_status, }, { - PHY_ID_MATCH_EXACT(PHY_ID_LAN865X_REVB0), - .name = "LAN865X Rev.B0 Internal Phy", + PHY_ID_MATCH_EXACT(PHY_ID_LAN867X_REVC1), + .name = "LAN867X Rev.C1", .features = PHY_BASIC_T1S_P2MP_FEATURES, - .config_init = lan865x_revb0_config_init, + .config_init = lan867x_revc_config_init, + .read_status = lan86xx_read_status, + .get_plca_cfg = genphy_c45_plca_get_cfg, + .set_plca_cfg = lan86xx_plca_set_cfg, + .get_plca_status = genphy_c45_plca_get_status, + }, + { + PHY_ID_MATCH_EXACT(PHY_ID_LAN867X_REVC2), + .name = "LAN867X Rev.C2", + .features = PHY_BASIC_T1S_P2MP_FEATURES, + .config_init = lan867x_revc_config_init, + .read_status = lan86xx_read_status, + .get_plca_cfg = genphy_c45_plca_get_cfg, + .set_plca_cfg = lan86xx_plca_set_cfg, + .get_plca_status = genphy_c45_plca_get_status, + }, + { + PHY_ID_MATCH_EXACT(PHY_ID_LAN865X_REVB), + .name = "LAN865X Rev.B0/B1 Internal Phy", + .features = PHY_BASIC_T1S_P2MP_FEATURES, + .config_init = lan865x_revb_config_init, .read_status = lan86xx_read_status, .read_mmd = lan865x_phy_read_mmd, .write_mmd = lan865x_phy_write_mmd, .get_plca_cfg = genphy_c45_plca_get_cfg, - .set_plca_cfg = genphy_c45_plca_set_cfg, + .set_plca_cfg = lan86xx_plca_set_cfg, .get_plca_status = genphy_c45_plca_get_status, }, }; @@ -325,7 +499,9 @@ module_phy_driver(microchip_t1s_driver); static struct mdio_device_id __maybe_unused tbl[] = { { PHY_ID_MATCH_EXACT(PHY_ID_LAN867X_REVB1) }, - { PHY_ID_MATCH_EXACT(PHY_ID_LAN865X_REVB0) }, + { PHY_ID_MATCH_EXACT(PHY_ID_LAN867X_REVC1) }, + { PHY_ID_MATCH_EXACT(PHY_ID_LAN867X_REVC2) }, + { PHY_ID_MATCH_EXACT(PHY_ID_LAN865X_REVB) }, { } }; |