summaryrefslogtreecommitdiff
path: root/drivers/net/phy/mxl-gpy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy/mxl-gpy.c')
-rw-r--r--drivers/net/phy/mxl-gpy.c469
1 files changed, 412 insertions, 57 deletions
diff --git a/drivers/net/phy/mxl-gpy.c b/drivers/net/phy/mxl-gpy.c
index 6301a9abfb95..8e2fd6b942b6 100644
--- a/drivers/net/phy/mxl-gpy.c
+++ b/drivers/net/phy/mxl-gpy.c
@@ -30,6 +30,9 @@
#define PHY_ID_GPY241B 0x67C9DE40
#define PHY_ID_GPY241BM 0x67C9DE80
#define PHY_ID_GPY245B 0x67C9DEC0
+#define PHY_ID_MXL86211C 0xC1335400
+#define PHY_ID_MXL86252 0xC1335520
+#define PHY_ID_MXL86282 0xC1335500
#define PHY_CTL1 0x13
#define PHY_CTL1_MDICD BIT(3)
@@ -38,6 +41,7 @@
#define PHY_MIISTAT 0x18 /* MII state */
#define PHY_IMASK 0x19 /* interrupt mask */
#define PHY_ISTAT 0x1A /* interrupt status */
+#define PHY_LED 0x1B /* LEDs */
#define PHY_FWV 0x1E /* firmware version */
#define PHY_MIISTAT_SPD_MASK GENMASK(2, 0)
@@ -61,6 +65,11 @@
PHY_IMASK_ADSC | \
PHY_IMASK_ANC)
+#define GPY_MAX_LEDS 4
+#define PHY_LED_POLARITY(idx) BIT(12 + (idx))
+#define PHY_LED_HWCONTROL(idx) BIT(8 + (idx))
+#define PHY_LED_ON(idx) BIT(idx)
+
#define PHY_FWV_REL_MASK BIT(15)
#define PHY_FWV_MAJOR_MASK GENMASK(11, 8)
#define PHY_FWV_MINOR_MASK GENMASK(7, 0)
@@ -72,6 +81,23 @@
#define PHY_MDI_MDI_X_CD 0x1
#define PHY_MDI_MDI_X_CROSS 0x0
+/* LED */
+#define VSPEC1_LED(idx) (1 + (idx))
+#define VSPEC1_LED_BLINKS GENMASK(15, 12)
+#define VSPEC1_LED_PULSE GENMASK(11, 8)
+#define VSPEC1_LED_CON GENMASK(7, 4)
+#define VSPEC1_LED_BLINKF GENMASK(3, 0)
+
+#define VSPEC1_LED_LINK10 BIT(0)
+#define VSPEC1_LED_LINK100 BIT(1)
+#define VSPEC1_LED_LINK1000 BIT(2)
+#define VSPEC1_LED_LINK2500 BIT(3)
+
+#define VSPEC1_LED_TXACT BIT(0)
+#define VSPEC1_LED_RXACT BIT(1)
+#define VSPEC1_LED_COL BIT(2)
+#define VSPEC1_LED_NO_CON BIT(3)
+
/* SGMII */
#define VSPEC1_SGMII_CTRL 0x08
#define VSPEC1_SGMII_CTRL_ANEN BIT(12) /* Aneg enable */
@@ -107,6 +133,7 @@ struct gpy_priv {
u8 fw_major;
u8 fw_minor;
+ u32 wolopts;
/* It takes 3 seconds to fully switch out of loopback mode before
* it can safely re-enter loopback mode. Record the time when
@@ -175,6 +202,29 @@ static int gpy_hwmon_read(struct device *dev,
return 0;
}
+static int mxl862x2_hwmon_read(struct device *dev,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel, long *value)
+{
+ struct phy_device *phydev = dev_get_drvdata(dev);
+ long tmp;
+ int ret;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_TEMP_STA);
+ if (ret < 0)
+ return ret;
+ if (!ret)
+ return -ENODATA;
+
+ tmp = (s16)ret;
+ tmp *= 78125;
+ tmp /= 10000;
+
+ *value = tmp;
+
+ return 0;
+}
+
static umode_t gpy_hwmon_is_visible(const void *data,
enum hwmon_sensor_types type,
u32 attr, int channel)
@@ -192,25 +242,35 @@ static const struct hwmon_ops gpy_hwmon_hwmon_ops = {
.read = gpy_hwmon_read,
};
+static const struct hwmon_ops mxl862x2_hwmon_hwmon_ops = {
+ .is_visible = gpy_hwmon_is_visible,
+ .read = mxl862x2_hwmon_read,
+};
+
static const struct hwmon_chip_info gpy_hwmon_chip_info = {
.ops = &gpy_hwmon_hwmon_ops,
.info = gpy_hwmon_info,
};
+static const struct hwmon_chip_info mxl862x2_hwmon_chip_info = {
+ .ops = &mxl862x2_hwmon_hwmon_ops,
+ .info = gpy_hwmon_info,
+};
+
static int gpy_hwmon_register(struct phy_device *phydev)
{
struct device *dev = &phydev->mdio.dev;
+ const struct hwmon_chip_info *info;
struct device *hwmon_dev;
- char *hwmon_name;
- hwmon_name = devm_hwmon_sanitize_name(dev, dev_name(dev));
- if (IS_ERR(hwmon_name))
- return PTR_ERR(hwmon_name);
+ if (phy_id_compare_model(phydev->phy_id, PHY_ID_MXL86252) ||
+ phy_id_compare_model(phydev->phy_id, PHY_ID_MXL86282))
+ info = &mxl862x2_hwmon_chip_info;
+ else
+ info = &gpy_hwmon_chip_info;
- hwmon_dev = devm_hwmon_device_register_with_info(dev, hwmon_name,
- phydev,
- &gpy_hwmon_chip_info,
- NULL);
+ hwmon_dev = devm_hwmon_device_register_with_info(dev, NULL, phydev,
+ info, NULL);
return PTR_ERR_OR_ZERO(hwmon_dev);
}
@@ -221,6 +281,15 @@ static int gpy_hwmon_register(struct phy_device *phydev)
}
#endif
+static int gpy_ack_interrupt(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Clear all pending interrupts */
+ ret = phy_read(phydev, PHY_ISTAT);
+ return ret < 0 ? ret : 0;
+}
+
static int gpy_mbox_read(struct phy_device *phydev, u32 addr)
{
struct gpy_priv *priv = phydev->priv;
@@ -262,23 +331,16 @@ out:
static int gpy_config_init(struct phy_device *phydev)
{
- int ret;
-
- /* Mask all interrupts */
- ret = phy_write(phydev, PHY_IMASK, 0);
- if (ret)
- return ret;
-
- /* Clear all pending interrupts */
- ret = phy_read(phydev, PHY_ISTAT);
- return ret < 0 ? ret : 0;
+ /* Nothing to configure. Configuration Requirement Placeholder */
+ return 0;
}
-static bool gpy_has_broken_mdint(struct phy_device *phydev)
+static int gpy21x_config_init(struct phy_device *phydev)
{
- /* At least these PHYs are known to have broken interrupt handling */
- return phydev->drv->phy_id == PHY_ID_GPY215B ||
- phydev->drv->phy_id == PHY_ID_GPY215C;
+ __set_bit(PHY_INTERFACE_MODE_2500BASEX, phydev->possible_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_SGMII, phydev->possible_interfaces);
+
+ return gpy_config_init(phydev);
}
static int gpy_probe(struct phy_device *phydev)
@@ -300,8 +362,7 @@ static int gpy_probe(struct phy_device *phydev)
phydev->priv = priv;
mutex_init(&priv->mbox_lock);
- if (gpy_has_broken_mdint(phydev) &&
- !device_property_present(dev, "maxlinear,use-broken-interrupts"))
+ if (!device_property_present(dev, "maxlinear,use-broken-interrupts"))
phydev->dev_flags |= PHY_F_NO_IRQ;
fw_version = phy_read(phydev, PHY_FWV);
@@ -521,7 +582,7 @@ static int gpy_update_interface(struct phy_device *phydev)
/* Interface mode is fixed for USXGMII and integrated PHY */
if (phydev->interface == PHY_INTERFACE_MODE_USXGMII ||
phydev->interface == PHY_INTERFACE_MODE_INTERNAL)
- return -EINVAL;
+ return 0;
/* Automatically switch SERDES interface between SGMII and 2500-BaseX
* according to speed. Disable ANEG in 2500-BaseX mode.
@@ -559,13 +620,7 @@ static int gpy_update_interface(struct phy_device *phydev)
break;
}
- if (phydev->speed == SPEED_2500 || phydev->speed == SPEED_1000) {
- ret = genphy_read_master_slave(phydev);
- if (ret < 0)
- return ret;
- }
-
- return gpy_update_mdix(phydev);
+ return 0;
}
static int gpy_read_status(struct phy_device *phydev)
@@ -620,6 +675,16 @@ static int gpy_read_status(struct phy_device *phydev)
ret = gpy_update_interface(phydev);
if (ret < 0)
return ret;
+
+ if (phydev->speed == SPEED_2500 || phydev->speed == SPEED_1000) {
+ ret = genphy_read_master_slave(phydev);
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = gpy_update_mdix(phydev);
+ if (ret < 0)
+ return ret;
}
return 0;
@@ -627,11 +692,23 @@ static int gpy_read_status(struct phy_device *phydev)
static int gpy_config_intr(struct phy_device *phydev)
{
+ struct gpy_priv *priv = phydev->priv;
u16 mask = 0;
+ int ret;
+
+ ret = gpy_ack_interrupt(phydev);
+ if (ret)
+ return ret;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
mask = PHY_IMASK_MASK;
+ if (priv->wolopts & WAKE_MAGIC)
+ mask |= PHY_IMASK_WOL;
+
+ if (priv->wolopts & WAKE_PHY)
+ mask |= PHY_IMASK_LSTC;
+
return phy_write(phydev, PHY_IMASK, mask);
}
@@ -659,11 +736,9 @@ static irqreturn_t gpy_handle_interrupt(struct phy_device *phydev)
* frame. Therefore, polling is the best we can do and won't do any more
* harm.
* It was observed that this bug happens on link state and link speed
- * changes on a GPY215B and GYP215C independent of the firmware version
- * (which doesn't mean that this list is exhaustive).
+ * changes independent of the firmware version.
*/
- if (gpy_has_broken_mdint(phydev) &&
- (reg & (PHY_IMASK_LSTC | PHY_IMASK_LSPC))) {
+ if (reg & (PHY_IMASK_LSTC | PHY_IMASK_LSPC)) {
reg = gpy_mbox_read(phydev, REG_GPIO0_OUT);
if (reg < 0) {
phy_error(phydev);
@@ -680,6 +755,7 @@ static int gpy_set_wol(struct phy_device *phydev,
struct ethtool_wolinfo *wol)
{
struct net_device *attach_dev = phydev->attached_dev;
+ struct gpy_priv *priv = phydev->priv;
int ret;
if (wol->wolopts & WAKE_MAGIC) {
@@ -727,6 +803,8 @@ static int gpy_set_wol(struct phy_device *phydev,
ret = phy_read(phydev, PHY_ISTAT);
if (ret < 0)
return ret;
+
+ priv->wolopts |= WAKE_MAGIC;
} else {
/* Disable magic packet matching */
ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2,
@@ -734,6 +812,13 @@ static int gpy_set_wol(struct phy_device *phydev,
WOL_EN);
if (ret < 0)
return ret;
+
+ /* Disable the WOL interrupt */
+ ret = phy_clear_bits(phydev, PHY_IMASK, PHY_IMASK_WOL);
+ if (ret < 0)
+ return ret;
+
+ priv->wolopts &= ~WAKE_MAGIC;
}
if (wol->wolopts & WAKE_PHY) {
@@ -750,9 +835,11 @@ static int gpy_set_wol(struct phy_device *phydev,
if (ret & (PHY_IMASK_MASK & ~PHY_IMASK_LSTC))
phy_trigger_machine(phydev);
+ priv->wolopts |= WAKE_PHY;
return 0;
}
+ priv->wolopts &= ~WAKE_PHY;
/* Disable the link state change interrupt */
return phy_clear_bits(phydev, PHY_IMASK, PHY_IMASK_LSTC);
}
@@ -760,21 +847,13 @@ static int gpy_set_wol(struct phy_device *phydev,
static void gpy_get_wol(struct phy_device *phydev,
struct ethtool_wolinfo *wol)
{
- int ret;
+ struct gpy_priv *priv = phydev->priv;
wol->supported = WAKE_MAGIC | WAKE_PHY;
- wol->wolopts = 0;
-
- ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, VPSPEC2_WOL_CTL);
- if (ret & WOL_EN)
- wol->wolopts |= WAKE_MAGIC;
-
- ret = phy_read(phydev, PHY_IMASK);
- if (ret & PHY_IMASK_LSTC)
- wol->wolopts |= WAKE_PHY;
+ wol->wolopts = priv->wolopts;
}
-static int gpy_loopback(struct phy_device *phydev, bool enable)
+static int gpy_loopback(struct phy_device *phydev, bool enable, int speed)
{
struct gpy_priv *priv = phydev->priv;
u16 set = 0;
@@ -783,6 +862,9 @@ static int gpy_loopback(struct phy_device *phydev, bool enable)
if (enable) {
u64 now = get_jiffies_64();
+ if (speed)
+ return -EOPNOTSUPP;
+
/* wait until 3 seconds from last disable */
if (time_before64(now, priv->lb_dis_to))
msleep(jiffies64_to_msecs(priv->lb_dis_to - now));
@@ -806,19 +888,178 @@ static int gpy_loopback(struct phy_device *phydev, bool enable)
return 0;
}
-static int gpy115_loopback(struct phy_device *phydev, bool enable)
+static int gpy115_loopback(struct phy_device *phydev, bool enable, int speed)
{
struct gpy_priv *priv = phydev->priv;
if (enable)
- return gpy_loopback(phydev, enable);
+ return gpy_loopback(phydev, enable, speed);
if (priv->fw_minor > 0x76)
- return gpy_loopback(phydev, 0);
+ return gpy_loopback(phydev, 0, 0);
return genphy_soft_reset(phydev);
}
+static int gpy_led_brightness_set(struct phy_device *phydev,
+ u8 index, enum led_brightness value)
+{
+ int ret;
+
+ if (index >= GPY_MAX_LEDS)
+ return -EINVAL;
+
+ /* clear HWCONTROL and set manual LED state */
+ ret = phy_modify(phydev, PHY_LED,
+ ((value == LED_OFF) ? PHY_LED_HWCONTROL(index) : 0) |
+ PHY_LED_ON(index),
+ (value == LED_OFF) ? 0 : PHY_LED_ON(index));
+ if (ret)
+ return ret;
+
+ /* ToDo: set PWM brightness */
+
+ /* clear HW LED setup */
+ if (value == LED_OFF)
+ return phy_write_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_LED(index), 0);
+ else
+ return 0;
+}
+
+static const unsigned long supported_triggers = (BIT(TRIGGER_NETDEV_LINK) |
+ BIT(TRIGGER_NETDEV_LINK_10) |
+ BIT(TRIGGER_NETDEV_LINK_100) |
+ BIT(TRIGGER_NETDEV_LINK_1000) |
+ BIT(TRIGGER_NETDEV_LINK_2500) |
+ BIT(TRIGGER_NETDEV_RX) |
+ BIT(TRIGGER_NETDEV_TX));
+
+static int gpy_led_hw_is_supported(struct phy_device *phydev, u8 index,
+ unsigned long rules)
+{
+ if (index >= GPY_MAX_LEDS)
+ return -EINVAL;
+
+ /* All combinations of the supported triggers are allowed */
+ if (rules & ~supported_triggers)
+ return -EOPNOTSUPP;
+
+ return 0;
+}
+
+static int gpy_led_hw_control_get(struct phy_device *phydev, u8 index,
+ unsigned long *rules)
+{
+ int val;
+
+ if (index >= GPY_MAX_LEDS)
+ return -EINVAL;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_LED(index));
+ if (val < 0)
+ return val;
+
+ if (FIELD_GET(VSPEC1_LED_CON, val) & VSPEC1_LED_LINK10)
+ *rules |= BIT(TRIGGER_NETDEV_LINK_10);
+
+ if (FIELD_GET(VSPEC1_LED_CON, val) & VSPEC1_LED_LINK100)
+ *rules |= BIT(TRIGGER_NETDEV_LINK_100);
+
+ if (FIELD_GET(VSPEC1_LED_CON, val) & VSPEC1_LED_LINK1000)
+ *rules |= BIT(TRIGGER_NETDEV_LINK_1000);
+
+ if (FIELD_GET(VSPEC1_LED_CON, val) & VSPEC1_LED_LINK2500)
+ *rules |= BIT(TRIGGER_NETDEV_LINK_2500);
+
+ if (FIELD_GET(VSPEC1_LED_CON, val) == (VSPEC1_LED_LINK10 |
+ VSPEC1_LED_LINK100 |
+ VSPEC1_LED_LINK1000 |
+ VSPEC1_LED_LINK2500))
+ *rules |= BIT(TRIGGER_NETDEV_LINK);
+
+ if (FIELD_GET(VSPEC1_LED_PULSE, val) & VSPEC1_LED_TXACT)
+ *rules |= BIT(TRIGGER_NETDEV_TX);
+
+ if (FIELD_GET(VSPEC1_LED_PULSE, val) & VSPEC1_LED_RXACT)
+ *rules |= BIT(TRIGGER_NETDEV_RX);
+
+ return 0;
+}
+
+static int gpy_led_hw_control_set(struct phy_device *phydev, u8 index,
+ unsigned long rules)
+{
+ u16 val = 0;
+ int ret;
+
+ if (index >= GPY_MAX_LEDS)
+ return -EINVAL;
+
+ if (rules & BIT(TRIGGER_NETDEV_LINK) ||
+ rules & BIT(TRIGGER_NETDEV_LINK_10))
+ val |= FIELD_PREP(VSPEC1_LED_CON, VSPEC1_LED_LINK10);
+
+ if (rules & BIT(TRIGGER_NETDEV_LINK) ||
+ rules & BIT(TRIGGER_NETDEV_LINK_100))
+ val |= FIELD_PREP(VSPEC1_LED_CON, VSPEC1_LED_LINK100);
+
+ if (rules & BIT(TRIGGER_NETDEV_LINK) ||
+ rules & BIT(TRIGGER_NETDEV_LINK_1000))
+ val |= FIELD_PREP(VSPEC1_LED_CON, VSPEC1_LED_LINK1000);
+
+ if (rules & BIT(TRIGGER_NETDEV_LINK) ||
+ rules & BIT(TRIGGER_NETDEV_LINK_2500))
+ val |= FIELD_PREP(VSPEC1_LED_CON, VSPEC1_LED_LINK2500);
+
+ if (rules & BIT(TRIGGER_NETDEV_TX))
+ val |= FIELD_PREP(VSPEC1_LED_PULSE, VSPEC1_LED_TXACT);
+
+ if (rules & BIT(TRIGGER_NETDEV_RX))
+ val |= FIELD_PREP(VSPEC1_LED_PULSE, VSPEC1_LED_RXACT);
+
+ /* allow RX/TX pulse without link indication */
+ if ((rules & BIT(TRIGGER_NETDEV_TX) || rules & BIT(TRIGGER_NETDEV_RX)) &&
+ !(val & VSPEC1_LED_CON))
+ val |= FIELD_PREP(VSPEC1_LED_PULSE, VSPEC1_LED_NO_CON) | VSPEC1_LED_CON;
+
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_LED(index), val);
+ if (ret)
+ return ret;
+
+ return phy_set_bits(phydev, PHY_LED, PHY_LED_HWCONTROL(index));
+}
+
+static int gpy_led_polarity_set(struct phy_device *phydev, int index,
+ unsigned long modes)
+{
+ bool force_active_low = false, force_active_high = false;
+ u32 mode;
+
+ if (index >= GPY_MAX_LEDS)
+ return -EINVAL;
+
+ for_each_set_bit(mode, &modes, __PHY_LED_MODES_NUM) {
+ switch (mode) {
+ case PHY_LED_ACTIVE_LOW:
+ force_active_low = true;
+ break;
+ case PHY_LED_ACTIVE_HIGH:
+ force_active_high = true;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ if (force_active_low)
+ return phy_set_bits(phydev, PHY_LED, PHY_LED_POLARITY(index));
+
+ if (force_active_high)
+ return phy_clear_bits(phydev, PHY_LED, PHY_LED_POLARITY(index));
+
+ return -EINVAL;
+}
+
static struct phy_driver gpy_drivers[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY2xx),
@@ -836,6 +1077,11 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ .led_brightness_set = gpy_led_brightness_set,
+ .led_hw_is_supported = gpy_led_hw_is_supported,
+ .led_hw_control_get = gpy_led_hw_control_get,
+ .led_hw_control_set = gpy_led_hw_control_set,
+ .led_polarity_set = gpy_led_polarity_set,
},
{
.phy_id = PHY_ID_GPY115B,
@@ -854,6 +1100,11 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy115_loopback,
+ .led_brightness_set = gpy_led_brightness_set,
+ .led_hw_is_supported = gpy_led_hw_is_supported,
+ .led_hw_control_get = gpy_led_hw_control_get,
+ .led_hw_control_set = gpy_led_hw_control_set,
+ .led_polarity_set = gpy_led_polarity_set,
},
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY115C),
@@ -871,13 +1122,18 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy115_loopback,
+ .led_brightness_set = gpy_led_brightness_set,
+ .led_hw_is_supported = gpy_led_hw_is_supported,
+ .led_hw_control_get = gpy_led_hw_control_get,
+ .led_hw_control_set = gpy_led_hw_control_set,
+ .led_polarity_set = gpy_led_polarity_set,
},
{
.phy_id = PHY_ID_GPY211B,
.phy_id_mask = PHY_ID_GPY21xB_MASK,
.name = "Maxlinear Ethernet GPY211B",
.get_features = genphy_c45_pma_read_abilities,
- .config_init = gpy_config_init,
+ .config_init = gpy21x_config_init,
.probe = gpy_probe,
.suspend = genphy_suspend,
.resume = genphy_resume,
@@ -889,12 +1145,17 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ .led_brightness_set = gpy_led_brightness_set,
+ .led_hw_is_supported = gpy_led_hw_is_supported,
+ .led_hw_control_get = gpy_led_hw_control_get,
+ .led_hw_control_set = gpy_led_hw_control_set,
+ .led_polarity_set = gpy_led_polarity_set,
},
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY211C),
.name = "Maxlinear Ethernet GPY211C",
.get_features = genphy_c45_pma_read_abilities,
- .config_init = gpy_config_init,
+ .config_init = gpy21x_config_init,
.probe = gpy_probe,
.suspend = genphy_suspend,
.resume = genphy_resume,
@@ -906,13 +1167,18 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ .led_brightness_set = gpy_led_brightness_set,
+ .led_hw_is_supported = gpy_led_hw_is_supported,
+ .led_hw_control_get = gpy_led_hw_control_get,
+ .led_hw_control_set = gpy_led_hw_control_set,
+ .led_polarity_set = gpy_led_polarity_set,
},
{
.phy_id = PHY_ID_GPY212B,
.phy_id_mask = PHY_ID_GPY21xB_MASK,
.name = "Maxlinear Ethernet GPY212B",
.get_features = genphy_c45_pma_read_abilities,
- .config_init = gpy_config_init,
+ .config_init = gpy21x_config_init,
.probe = gpy_probe,
.suspend = genphy_suspend,
.resume = genphy_resume,
@@ -924,12 +1190,17 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ .led_brightness_set = gpy_led_brightness_set,
+ .led_hw_is_supported = gpy_led_hw_is_supported,
+ .led_hw_control_get = gpy_led_hw_control_get,
+ .led_hw_control_set = gpy_led_hw_control_set,
+ .led_polarity_set = gpy_led_polarity_set,
},
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY212C),
.name = "Maxlinear Ethernet GPY212C",
.get_features = genphy_c45_pma_read_abilities,
- .config_init = gpy_config_init,
+ .config_init = gpy21x_config_init,
.probe = gpy_probe,
.suspend = genphy_suspend,
.resume = genphy_resume,
@@ -941,13 +1212,18 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ .led_brightness_set = gpy_led_brightness_set,
+ .led_hw_is_supported = gpy_led_hw_is_supported,
+ .led_hw_control_get = gpy_led_hw_control_get,
+ .led_hw_control_set = gpy_led_hw_control_set,
+ .led_polarity_set = gpy_led_polarity_set,
},
{
.phy_id = PHY_ID_GPY215B,
.phy_id_mask = PHY_ID_GPYx15B_MASK,
.name = "Maxlinear Ethernet GPY215B",
.get_features = genphy_c45_pma_read_abilities,
- .config_init = gpy_config_init,
+ .config_init = gpy21x_config_init,
.probe = gpy_probe,
.suspend = genphy_suspend,
.resume = genphy_resume,
@@ -959,12 +1235,17 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ .led_brightness_set = gpy_led_brightness_set,
+ .led_hw_is_supported = gpy_led_hw_is_supported,
+ .led_hw_control_get = gpy_led_hw_control_get,
+ .led_hw_control_set = gpy_led_hw_control_set,
+ .led_polarity_set = gpy_led_polarity_set,
},
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY215C),
.name = "Maxlinear Ethernet GPY215C",
.get_features = genphy_c45_pma_read_abilities,
- .config_init = gpy_config_init,
+ .config_init = gpy21x_config_init,
.probe = gpy_probe,
.suspend = genphy_suspend,
.resume = genphy_resume,
@@ -976,6 +1257,11 @@ static struct phy_driver gpy_drivers[] = {
.set_wol = gpy_set_wol,
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
+ .led_brightness_set = gpy_led_brightness_set,
+ .led_hw_is_supported = gpy_led_hw_is_supported,
+ .led_hw_control_get = gpy_led_hw_control_get,
+ .led_hw_control_set = gpy_led_hw_control_set,
+ .led_polarity_set = gpy_led_polarity_set,
},
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY241B),
@@ -1028,10 +1314,76 @@ static struct phy_driver gpy_drivers[] = {
.get_wol = gpy_get_wol,
.set_loopback = gpy_loopback,
},
+ {
+ PHY_ID_MATCH_MODEL(PHY_ID_MXL86211C),
+ .name = "Maxlinear Ethernet MxL86211C",
+ .get_features = genphy_c45_pma_read_abilities,
+ .config_init = gpy_config_init,
+ .probe = gpy_probe,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .config_aneg = gpy_config_aneg,
+ .aneg_done = genphy_c45_aneg_done,
+ .read_status = gpy_read_status,
+ .config_intr = gpy_config_intr,
+ .handle_interrupt = gpy_handle_interrupt,
+ .set_wol = gpy_set_wol,
+ .get_wol = gpy_get_wol,
+ .set_loopback = gpy_loopback,
+ .led_brightness_set = gpy_led_brightness_set,
+ .led_hw_is_supported = gpy_led_hw_is_supported,
+ .led_hw_control_get = gpy_led_hw_control_get,
+ .led_hw_control_set = gpy_led_hw_control_set,
+ .led_polarity_set = gpy_led_polarity_set,
+ },
+ {
+ PHY_ID_MATCH_MODEL(PHY_ID_MXL86252),
+ .name = "MaxLinear Ethernet MxL86252",
+ .get_features = genphy_c45_pma_read_abilities,
+ .config_init = gpy_config_init,
+ .probe = gpy_probe,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .config_aneg = gpy_config_aneg,
+ .aneg_done = genphy_c45_aneg_done,
+ .read_status = gpy_read_status,
+ .config_intr = gpy_config_intr,
+ .handle_interrupt = gpy_handle_interrupt,
+ .set_wol = gpy_set_wol,
+ .get_wol = gpy_get_wol,
+ .set_loopback = gpy_loopback,
+ .led_brightness_set = gpy_led_brightness_set,
+ .led_hw_is_supported = gpy_led_hw_is_supported,
+ .led_hw_control_get = gpy_led_hw_control_get,
+ .led_hw_control_set = gpy_led_hw_control_set,
+ .led_polarity_set = gpy_led_polarity_set,
+ },
+ {
+ PHY_ID_MATCH_MODEL(PHY_ID_MXL86282),
+ .name = "MaxLinear Ethernet MxL86282",
+ .get_features = genphy_c45_pma_read_abilities,
+ .config_init = gpy_config_init,
+ .probe = gpy_probe,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .config_aneg = gpy_config_aneg,
+ .aneg_done = genphy_c45_aneg_done,
+ .read_status = gpy_read_status,
+ .config_intr = gpy_config_intr,
+ .handle_interrupt = gpy_handle_interrupt,
+ .set_wol = gpy_set_wol,
+ .get_wol = gpy_get_wol,
+ .set_loopback = gpy_loopback,
+ .led_brightness_set = gpy_led_brightness_set,
+ .led_hw_is_supported = gpy_led_hw_is_supported,
+ .led_hw_control_get = gpy_led_hw_control_get,
+ .led_hw_control_set = gpy_led_hw_control_set,
+ .led_polarity_set = gpy_led_polarity_set,
+ },
};
module_phy_driver(gpy_drivers);
-static struct mdio_device_id __maybe_unused gpy_tbl[] = {
+static const struct mdio_device_id __maybe_unused gpy_tbl[] = {
{PHY_ID_MATCH_MODEL(PHY_ID_GPY2xx)},
{PHY_ID_GPY115B, PHY_ID_GPYx15B_MASK},
{PHY_ID_MATCH_MODEL(PHY_ID_GPY115C)},
@@ -1044,6 +1396,9 @@ static struct mdio_device_id __maybe_unused gpy_tbl[] = {
{PHY_ID_MATCH_MODEL(PHY_ID_GPY241B)},
{PHY_ID_MATCH_MODEL(PHY_ID_GPY241BM)},
{PHY_ID_MATCH_MODEL(PHY_ID_GPY245B)},
+ {PHY_ID_MATCH_MODEL(PHY_ID_MXL86211C)},
+ {PHY_ID_MATCH_MODEL(PHY_ID_MXL86252)},
+ {PHY_ID_MATCH_MODEL(PHY_ID_MXL86282)},
{ }
};
MODULE_DEVICE_TABLE(mdio, gpy_tbl);
generated by cgit (git 2.34.1) at 2025-12-25 07:24:10 +0000