diff options
Diffstat (limited to 'drivers/net/phy/mxl-gpy.c')
| -rw-r--r-- | drivers/net/phy/mxl-gpy.c | 381 |
1 files changed, 360 insertions, 21 deletions
diff --git a/drivers/net/phy/mxl-gpy.c b/drivers/net/phy/mxl-gpy.c index e5f8ac4b4604..8e2fd6b942b6 100644 --- a/drivers/net/phy/mxl-gpy.c +++ b/drivers/net/phy/mxl-gpy.c @@ -30,6 +30,9 @@ #define PHY_ID_GPY241B 0x67C9DE40 #define PHY_ID_GPY241BM 0x67C9DE80 #define PHY_ID_GPY245B 0x67C9DEC0 +#define PHY_ID_MXL86211C 0xC1335400 +#define PHY_ID_MXL86252 0xC1335520 +#define PHY_ID_MXL86282 0xC1335500 #define PHY_CTL1 0x13 #define PHY_CTL1_MDICD BIT(3) @@ -38,6 +41,7 @@ #define PHY_MIISTAT 0x18 /* MII state */ #define PHY_IMASK 0x19 /* interrupt mask */ #define PHY_ISTAT 0x1A /* interrupt status */ +#define PHY_LED 0x1B /* LEDs */ #define PHY_FWV 0x1E /* firmware version */ #define PHY_MIISTAT_SPD_MASK GENMASK(2, 0) @@ -61,6 +65,11 @@ PHY_IMASK_ADSC | \ PHY_IMASK_ANC) +#define GPY_MAX_LEDS 4 +#define PHY_LED_POLARITY(idx) BIT(12 + (idx)) +#define PHY_LED_HWCONTROL(idx) BIT(8 + (idx)) +#define PHY_LED_ON(idx) BIT(idx) + #define PHY_FWV_REL_MASK BIT(15) #define PHY_FWV_MAJOR_MASK GENMASK(11, 8) #define PHY_FWV_MINOR_MASK GENMASK(7, 0) @@ -72,6 +81,23 @@ #define PHY_MDI_MDI_X_CD 0x1 #define PHY_MDI_MDI_X_CROSS 0x0 +/* LED */ +#define VSPEC1_LED(idx) (1 + (idx)) +#define VSPEC1_LED_BLINKS GENMASK(15, 12) +#define VSPEC1_LED_PULSE GENMASK(11, 8) +#define VSPEC1_LED_CON GENMASK(7, 4) +#define VSPEC1_LED_BLINKF GENMASK(3, 0) + +#define VSPEC1_LED_LINK10 BIT(0) +#define VSPEC1_LED_LINK100 BIT(1) +#define VSPEC1_LED_LINK1000 BIT(2) +#define VSPEC1_LED_LINK2500 BIT(3) + +#define VSPEC1_LED_TXACT BIT(0) +#define VSPEC1_LED_RXACT BIT(1) +#define VSPEC1_LED_COL BIT(2) +#define VSPEC1_LED_NO_CON BIT(3) + /* SGMII */ #define VSPEC1_SGMII_CTRL 0x08 #define VSPEC1_SGMII_CTRL_ANEN BIT(12) /* Aneg enable */ @@ -176,6 +202,29 @@ static int gpy_hwmon_read(struct device *dev, return 0; } +static int mxl862x2_hwmon_read(struct device *dev, + enum hwmon_sensor_types type, + u32 attr, int channel, long *value) +{ + struct phy_device *phydev = dev_get_drvdata(dev); + long tmp; + int ret; + + ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_TEMP_STA); + if (ret < 0) + return ret; + if (!ret) + return -ENODATA; + + tmp = (s16)ret; + tmp *= 78125; + tmp /= 10000; + + *value = tmp; + + return 0; +} + static umode_t gpy_hwmon_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr, int channel) @@ -193,25 +242,35 @@ static const struct hwmon_ops gpy_hwmon_hwmon_ops = { .read = gpy_hwmon_read, }; +static const struct hwmon_ops mxl862x2_hwmon_hwmon_ops = { + .is_visible = gpy_hwmon_is_visible, + .read = mxl862x2_hwmon_read, +}; + static const struct hwmon_chip_info gpy_hwmon_chip_info = { .ops = &gpy_hwmon_hwmon_ops, .info = gpy_hwmon_info, }; +static const struct hwmon_chip_info mxl862x2_hwmon_chip_info = { + .ops = &mxl862x2_hwmon_hwmon_ops, + .info = gpy_hwmon_info, +}; + static int gpy_hwmon_register(struct phy_device *phydev) { struct device *dev = &phydev->mdio.dev; + const struct hwmon_chip_info *info; struct device *hwmon_dev; - char *hwmon_name; - hwmon_name = devm_hwmon_sanitize_name(dev, dev_name(dev)); - if (IS_ERR(hwmon_name)) - return PTR_ERR(hwmon_name); + if (phy_id_compare_model(phydev->phy_id, PHY_ID_MXL86252) || + phy_id_compare_model(phydev->phy_id, PHY_ID_MXL86282)) + info = &mxl862x2_hwmon_chip_info; + else + info = &gpy_hwmon_chip_info; - hwmon_dev = devm_hwmon_device_register_with_info(dev, hwmon_name, - phydev, - &gpy_hwmon_chip_info, - NULL); + hwmon_dev = devm_hwmon_device_register_with_info(dev, NULL, phydev, + info, NULL); return PTR_ERR_OR_ZERO(hwmon_dev); } @@ -523,7 +582,7 @@ static int gpy_update_interface(struct phy_device *phydev) /* Interface mode is fixed for USXGMII and integrated PHY */ if (phydev->interface == PHY_INTERFACE_MODE_USXGMII || phydev->interface == PHY_INTERFACE_MODE_INTERNAL) - return -EINVAL; + return 0; /* Automatically switch SERDES interface between SGMII and 2500-BaseX * according to speed. Disable ANEG in 2500-BaseX mode. @@ -561,13 +620,7 @@ static int gpy_update_interface(struct phy_device *phydev) break; } - if (phydev->speed == SPEED_2500 || phydev->speed == SPEED_1000) { - ret = genphy_read_master_slave(phydev); - if (ret < 0) - return ret; - } - - return gpy_update_mdix(phydev); + return 0; } static int gpy_read_status(struct phy_device *phydev) @@ -622,6 +675,16 @@ static int gpy_read_status(struct phy_device *phydev) ret = gpy_update_interface(phydev); if (ret < 0) return ret; + + if (phydev->speed == SPEED_2500 || phydev->speed == SPEED_1000) { + ret = genphy_read_master_slave(phydev); + if (ret < 0) + return ret; + } + + ret = gpy_update_mdix(phydev); + if (ret < 0) + return ret; } return 0; @@ -790,7 +853,7 @@ static void gpy_get_wol(struct phy_device *phydev, wol->wolopts = priv->wolopts; } -static int gpy_loopback(struct phy_device *phydev, bool enable) +static int gpy_loopback(struct phy_device *phydev, bool enable, int speed) { struct gpy_priv *priv = phydev->priv; u16 set = 0; @@ -799,6 +862,9 @@ static int gpy_loopback(struct phy_device *phydev, bool enable) if (enable) { u64 now = get_jiffies_64(); + if (speed) + return -EOPNOTSUPP; + /* wait until 3 seconds from last disable */ if (time_before64(now, priv->lb_dis_to)) msleep(jiffies64_to_msecs(priv->lb_dis_to - now)); @@ -822,19 +888,178 @@ static int gpy_loopback(struct phy_device *phydev, bool enable) return 0; } -static int gpy115_loopback(struct phy_device *phydev, bool enable) +static int gpy115_loopback(struct phy_device *phydev, bool enable, int speed) { struct gpy_priv *priv = phydev->priv; if (enable) - return gpy_loopback(phydev, enable); + return gpy_loopback(phydev, enable, speed); if (priv->fw_minor > 0x76) - return gpy_loopback(phydev, 0); + return gpy_loopback(phydev, 0, 0); return genphy_soft_reset(phydev); } +static int gpy_led_brightness_set(struct phy_device *phydev, + u8 index, enum led_brightness value) +{ + int ret; + + if (index >= GPY_MAX_LEDS) + return -EINVAL; + + /* clear HWCONTROL and set manual LED state */ + ret = phy_modify(phydev, PHY_LED, + ((value == LED_OFF) ? PHY_LED_HWCONTROL(index) : 0) | + PHY_LED_ON(index), + (value == LED_OFF) ? 0 : PHY_LED_ON(index)); + if (ret) + return ret; + + /* ToDo: set PWM brightness */ + + /* clear HW LED setup */ + if (value == LED_OFF) + return phy_write_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_LED(index), 0); + else + return 0; +} + +static const unsigned long supported_triggers = (BIT(TRIGGER_NETDEV_LINK) | + BIT(TRIGGER_NETDEV_LINK_10) | + BIT(TRIGGER_NETDEV_LINK_100) | + BIT(TRIGGER_NETDEV_LINK_1000) | + BIT(TRIGGER_NETDEV_LINK_2500) | + BIT(TRIGGER_NETDEV_RX) | + BIT(TRIGGER_NETDEV_TX)); + +static int gpy_led_hw_is_supported(struct phy_device *phydev, u8 index, + unsigned long rules) +{ + if (index >= GPY_MAX_LEDS) + return -EINVAL; + + /* All combinations of the supported triggers are allowed */ + if (rules & ~supported_triggers) + return -EOPNOTSUPP; + + return 0; +} + +static int gpy_led_hw_control_get(struct phy_device *phydev, u8 index, + unsigned long *rules) +{ + int val; + + if (index >= GPY_MAX_LEDS) + return -EINVAL; + + val = phy_read_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_LED(index)); + if (val < 0) + return val; + + if (FIELD_GET(VSPEC1_LED_CON, val) & VSPEC1_LED_LINK10) + *rules |= BIT(TRIGGER_NETDEV_LINK_10); + + if (FIELD_GET(VSPEC1_LED_CON, val) & VSPEC1_LED_LINK100) + *rules |= BIT(TRIGGER_NETDEV_LINK_100); + + if (FIELD_GET(VSPEC1_LED_CON, val) & VSPEC1_LED_LINK1000) + *rules |= BIT(TRIGGER_NETDEV_LINK_1000); + + if (FIELD_GET(VSPEC1_LED_CON, val) & VSPEC1_LED_LINK2500) + *rules |= BIT(TRIGGER_NETDEV_LINK_2500); + + if (FIELD_GET(VSPEC1_LED_CON, val) == (VSPEC1_LED_LINK10 | + VSPEC1_LED_LINK100 | + VSPEC1_LED_LINK1000 | + VSPEC1_LED_LINK2500)) + *rules |= BIT(TRIGGER_NETDEV_LINK); + + if (FIELD_GET(VSPEC1_LED_PULSE, val) & VSPEC1_LED_TXACT) + *rules |= BIT(TRIGGER_NETDEV_TX); + + if (FIELD_GET(VSPEC1_LED_PULSE, val) & VSPEC1_LED_RXACT) + *rules |= BIT(TRIGGER_NETDEV_RX); + + return 0; +} + +static int gpy_led_hw_control_set(struct phy_device *phydev, u8 index, + unsigned long rules) +{ + u16 val = 0; + int ret; + + if (index >= GPY_MAX_LEDS) + return -EINVAL; + + if (rules & BIT(TRIGGER_NETDEV_LINK) || + rules & BIT(TRIGGER_NETDEV_LINK_10)) + val |= FIELD_PREP(VSPEC1_LED_CON, VSPEC1_LED_LINK10); + + if (rules & BIT(TRIGGER_NETDEV_LINK) || + rules & BIT(TRIGGER_NETDEV_LINK_100)) + val |= FIELD_PREP(VSPEC1_LED_CON, VSPEC1_LED_LINK100); + + if (rules & BIT(TRIGGER_NETDEV_LINK) || + rules & BIT(TRIGGER_NETDEV_LINK_1000)) + val |= FIELD_PREP(VSPEC1_LED_CON, VSPEC1_LED_LINK1000); + + if (rules & BIT(TRIGGER_NETDEV_LINK) || + rules & BIT(TRIGGER_NETDEV_LINK_2500)) + val |= FIELD_PREP(VSPEC1_LED_CON, VSPEC1_LED_LINK2500); + + if (rules & BIT(TRIGGER_NETDEV_TX)) + val |= FIELD_PREP(VSPEC1_LED_PULSE, VSPEC1_LED_TXACT); + + if (rules & BIT(TRIGGER_NETDEV_RX)) + val |= FIELD_PREP(VSPEC1_LED_PULSE, VSPEC1_LED_RXACT); + + /* allow RX/TX pulse without link indication */ + if ((rules & BIT(TRIGGER_NETDEV_TX) || rules & BIT(TRIGGER_NETDEV_RX)) && + !(val & VSPEC1_LED_CON)) + val |= FIELD_PREP(VSPEC1_LED_PULSE, VSPEC1_LED_NO_CON) | VSPEC1_LED_CON; + + ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_LED(index), val); + if (ret) + return ret; + + return phy_set_bits(phydev, PHY_LED, PHY_LED_HWCONTROL(index)); +} + +static int gpy_led_polarity_set(struct phy_device *phydev, int index, + unsigned long modes) +{ + bool force_active_low = false, force_active_high = false; + u32 mode; + + if (index >= GPY_MAX_LEDS) + return -EINVAL; + + for_each_set_bit(mode, &modes, __PHY_LED_MODES_NUM) { + switch (mode) { + case PHY_LED_ACTIVE_LOW: + force_active_low = true; + break; + case PHY_LED_ACTIVE_HIGH: + force_active_high = true; + break; + default: + return -EINVAL; + } + } + + if (force_active_low) + return phy_set_bits(phydev, PHY_LED, PHY_LED_POLARITY(index)); + + if (force_active_high) + return phy_clear_bits(phydev, PHY_LED, PHY_LED_POLARITY(index)); + + return -EINVAL; +} + static struct phy_driver gpy_drivers[] = { { PHY_ID_MATCH_MODEL(PHY_ID_GPY2xx), @@ -852,6 +1077,11 @@ static struct phy_driver gpy_drivers[] = { .set_wol = gpy_set_wol, .get_wol = gpy_get_wol, .set_loopback = gpy_loopback, + .led_brightness_set = gpy_led_brightness_set, + .led_hw_is_supported = gpy_led_hw_is_supported, + .led_hw_control_get = gpy_led_hw_control_get, + .led_hw_control_set = gpy_led_hw_control_set, + .led_polarity_set = gpy_led_polarity_set, }, { .phy_id = PHY_ID_GPY115B, @@ -870,6 +1100,11 @@ static struct phy_driver gpy_drivers[] = { .set_wol = gpy_set_wol, .get_wol = gpy_get_wol, .set_loopback = gpy115_loopback, + .led_brightness_set = gpy_led_brightness_set, + .led_hw_is_supported = gpy_led_hw_is_supported, + .led_hw_control_get = gpy_led_hw_control_get, + .led_hw_control_set = gpy_led_hw_control_set, + .led_polarity_set = gpy_led_polarity_set, }, { PHY_ID_MATCH_MODEL(PHY_ID_GPY115C), @@ -887,6 +1122,11 @@ static struct phy_driver gpy_drivers[] = { .set_wol = gpy_set_wol, .get_wol = gpy_get_wol, .set_loopback = gpy115_loopback, + .led_brightness_set = gpy_led_brightness_set, + .led_hw_is_supported = gpy_led_hw_is_supported, + .led_hw_control_get = gpy_led_hw_control_get, + .led_hw_control_set = gpy_led_hw_control_set, + .led_polarity_set = gpy_led_polarity_set, }, { .phy_id = PHY_ID_GPY211B, @@ -905,6 +1145,11 @@ static struct phy_driver gpy_drivers[] = { .set_wol = gpy_set_wol, .get_wol = gpy_get_wol, .set_loopback = gpy_loopback, + .led_brightness_set = gpy_led_brightness_set, + .led_hw_is_supported = gpy_led_hw_is_supported, + .led_hw_control_get = gpy_led_hw_control_get, + .led_hw_control_set = gpy_led_hw_control_set, + .led_polarity_set = gpy_led_polarity_set, }, { PHY_ID_MATCH_MODEL(PHY_ID_GPY211C), @@ -922,6 +1167,11 @@ static struct phy_driver gpy_drivers[] = { .set_wol = gpy_set_wol, .get_wol = gpy_get_wol, .set_loopback = gpy_loopback, + .led_brightness_set = gpy_led_brightness_set, + .led_hw_is_supported = gpy_led_hw_is_supported, + .led_hw_control_get = gpy_led_hw_control_get, + .led_hw_control_set = gpy_led_hw_control_set, + .led_polarity_set = gpy_led_polarity_set, }, { .phy_id = PHY_ID_GPY212B, @@ -940,6 +1190,11 @@ static struct phy_driver gpy_drivers[] = { .set_wol = gpy_set_wol, .get_wol = gpy_get_wol, .set_loopback = gpy_loopback, + .led_brightness_set = gpy_led_brightness_set, + .led_hw_is_supported = gpy_led_hw_is_supported, + .led_hw_control_get = gpy_led_hw_control_get, + .led_hw_control_set = gpy_led_hw_control_set, + .led_polarity_set = gpy_led_polarity_set, }, { PHY_ID_MATCH_MODEL(PHY_ID_GPY212C), @@ -957,6 +1212,11 @@ static struct phy_driver gpy_drivers[] = { .set_wol = gpy_set_wol, .get_wol = gpy_get_wol, .set_loopback = gpy_loopback, + .led_brightness_set = gpy_led_brightness_set, + .led_hw_is_supported = gpy_led_hw_is_supported, + .led_hw_control_get = gpy_led_hw_control_get, + .led_hw_control_set = gpy_led_hw_control_set, + .led_polarity_set = gpy_led_polarity_set, }, { .phy_id = PHY_ID_GPY215B, @@ -975,6 +1235,11 @@ static struct phy_driver gpy_drivers[] = { .set_wol = gpy_set_wol, .get_wol = gpy_get_wol, .set_loopback = gpy_loopback, + .led_brightness_set = gpy_led_brightness_set, + .led_hw_is_supported = gpy_led_hw_is_supported, + .led_hw_control_get = gpy_led_hw_control_get, + .led_hw_control_set = gpy_led_hw_control_set, + .led_polarity_set = gpy_led_polarity_set, }, { PHY_ID_MATCH_MODEL(PHY_ID_GPY215C), @@ -992,6 +1257,11 @@ static struct phy_driver gpy_drivers[] = { .set_wol = gpy_set_wol, .get_wol = gpy_get_wol, .set_loopback = gpy_loopback, + .led_brightness_set = gpy_led_brightness_set, + .led_hw_is_supported = gpy_led_hw_is_supported, + .led_hw_control_get = gpy_led_hw_control_get, + .led_hw_control_set = gpy_led_hw_control_set, + .led_polarity_set = gpy_led_polarity_set, }, { PHY_ID_MATCH_MODEL(PHY_ID_GPY241B), @@ -1044,10 +1314,76 @@ static struct phy_driver gpy_drivers[] = { .get_wol = gpy_get_wol, .set_loopback = gpy_loopback, }, + { + PHY_ID_MATCH_MODEL(PHY_ID_MXL86211C), + .name = "Maxlinear Ethernet MxL86211C", + .get_features = genphy_c45_pma_read_abilities, + .config_init = gpy_config_init, + .probe = gpy_probe, + .suspend = genphy_suspend, + .resume = genphy_resume, + .config_aneg = gpy_config_aneg, + .aneg_done = genphy_c45_aneg_done, + .read_status = gpy_read_status, + .config_intr = gpy_config_intr, + .handle_interrupt = gpy_handle_interrupt, + .set_wol = gpy_set_wol, + .get_wol = gpy_get_wol, + .set_loopback = gpy_loopback, + .led_brightness_set = gpy_led_brightness_set, + .led_hw_is_supported = gpy_led_hw_is_supported, + .led_hw_control_get = gpy_led_hw_control_get, + .led_hw_control_set = gpy_led_hw_control_set, + .led_polarity_set = gpy_led_polarity_set, + }, + { + PHY_ID_MATCH_MODEL(PHY_ID_MXL86252), + .name = "MaxLinear Ethernet MxL86252", + .get_features = genphy_c45_pma_read_abilities, + .config_init = gpy_config_init, + .probe = gpy_probe, + .suspend = genphy_suspend, + .resume = genphy_resume, + .config_aneg = gpy_config_aneg, + .aneg_done = genphy_c45_aneg_done, + .read_status = gpy_read_status, + .config_intr = gpy_config_intr, + .handle_interrupt = gpy_handle_interrupt, + .set_wol = gpy_set_wol, + .get_wol = gpy_get_wol, + .set_loopback = gpy_loopback, + .led_brightness_set = gpy_led_brightness_set, + .led_hw_is_supported = gpy_led_hw_is_supported, + .led_hw_control_get = gpy_led_hw_control_get, + .led_hw_control_set = gpy_led_hw_control_set, + .led_polarity_set = gpy_led_polarity_set, + }, + { + PHY_ID_MATCH_MODEL(PHY_ID_MXL86282), + .name = "MaxLinear Ethernet MxL86282", + .get_features = genphy_c45_pma_read_abilities, + .config_init = gpy_config_init, + .probe = gpy_probe, + .suspend = genphy_suspend, + .resume = genphy_resume, + .config_aneg = gpy_config_aneg, + .aneg_done = genphy_c45_aneg_done, + .read_status = gpy_read_status, + .config_intr = gpy_config_intr, + .handle_interrupt = gpy_handle_interrupt, + .set_wol = gpy_set_wol, + .get_wol = gpy_get_wol, + .set_loopback = gpy_loopback, + .led_brightness_set = gpy_led_brightness_set, + .led_hw_is_supported = gpy_led_hw_is_supported, + .led_hw_control_get = gpy_led_hw_control_get, + .led_hw_control_set = gpy_led_hw_control_set, + .led_polarity_set = gpy_led_polarity_set, + }, }; module_phy_driver(gpy_drivers); -static struct mdio_device_id __maybe_unused gpy_tbl[] = { +static const struct mdio_device_id __maybe_unused gpy_tbl[] = { {PHY_ID_MATCH_MODEL(PHY_ID_GPY2xx)}, {PHY_ID_GPY115B, PHY_ID_GPYx15B_MASK}, {PHY_ID_MATCH_MODEL(PHY_ID_GPY115C)}, @@ -1060,6 +1396,9 @@ static struct mdio_device_id __maybe_unused gpy_tbl[] = { {PHY_ID_MATCH_MODEL(PHY_ID_GPY241B)}, {PHY_ID_MATCH_MODEL(PHY_ID_GPY241BM)}, {PHY_ID_MATCH_MODEL(PHY_ID_GPY245B)}, + {PHY_ID_MATCH_MODEL(PHY_ID_MXL86211C)}, + {PHY_ID_MATCH_MODEL(PHY_ID_MXL86252)}, + {PHY_ID_MATCH_MODEL(PHY_ID_MXL86282)}, { } }; MODULE_DEVICE_TABLE(mdio, gpy_tbl); |