summaryrefslogtreecommitdiff
path: root/drivers/net/tulip/interrupt.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/tulip/interrupt.c')
-rw-r--r--drivers/net/tulip/interrupt.c786
1 files changed, 786 insertions, 0 deletions
diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/tulip/interrupt.c
new file mode 100644
index 000000000000..afb5cda9d8e1
--- /dev/null
+++ b/drivers/net/tulip/interrupt.c
@@ -0,0 +1,786 @@
+/*
+ drivers/net/tulip/interrupt.c
+
+ Maintained by Jeff Garzik <jgarzik@pobox.com>
+ Copyright 2000,2001 The Linux Kernel Team
+ Written/copyright 1994-2001 by Donald Becker.
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
+ for more information on this driver, or visit the project
+ Web page at http://sourceforge.net/projects/tulip/
+
+*/
+
+#include <linux/pci.h>
+#include "tulip.h"
+#include <linux/config.h>
+#include <linux/etherdevice.h>
+
+int tulip_rx_copybreak;
+unsigned int tulip_max_interrupt_work;
+
+#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
+#define MIT_SIZE 15
+#define MIT_TABLE 15 /* We use 0 or max */
+
+static unsigned int mit_table[MIT_SIZE+1] =
+{
+ /* CRS11 21143 hardware Mitigation Control Interrupt
+ We use only RX mitigation we other techniques for
+ TX intr. mitigation.
+
+ 31 Cycle Size (timer control)
+ 30:27 TX timer in 16 * Cycle size
+ 26:24 TX No pkts before Int.
+ 23:20 RX timer in Cycle size
+ 19:17 RX No pkts before Int.
+ 16 Continues Mode (CM)
+ */
+
+ 0x0, /* IM disabled */
+ 0x80150000, /* RX time = 1, RX pkts = 2, CM = 1 */
+ 0x80150000,
+ 0x80270000,
+ 0x80370000,
+ 0x80490000,
+ 0x80590000,
+ 0x80690000,
+ 0x807B0000,
+ 0x808B0000,
+ 0x809D0000,
+ 0x80AD0000,
+ 0x80BD0000,
+ 0x80CF0000,
+ 0x80DF0000,
+// 0x80FF0000 /* RX time = 16, RX pkts = 7, CM = 1 */
+ 0x80F10000 /* RX time = 16, RX pkts = 0, CM = 1 */
+};
+#endif
+
+
+int tulip_refill_rx(struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ int entry;
+ int refilled = 0;
+
+ /* Refill the Rx ring buffers. */
+ for (; tp->cur_rx - tp->dirty_rx > 0; tp->dirty_rx++) {
+ entry = tp->dirty_rx % RX_RING_SIZE;
+ if (tp->rx_buffers[entry].skb == NULL) {
+ struct sk_buff *skb;
+ dma_addr_t mapping;
+
+ skb = tp->rx_buffers[entry].skb = dev_alloc_skb(PKT_BUF_SZ);
+ if (skb == NULL)
+ break;
+
+ mapping = pci_map_single(tp->pdev, skb->tail, PKT_BUF_SZ,
+ PCI_DMA_FROMDEVICE);
+ tp->rx_buffers[entry].mapping = mapping;
+
+ skb->dev = dev; /* Mark as being used by this device. */
+ tp->rx_ring[entry].buffer1 = cpu_to_le32(mapping);
+ refilled++;
+ }
+ tp->rx_ring[entry].status = cpu_to_le32(DescOwned);
+ }
+ if(tp->chip_id == LC82C168) {
+ if(((ioread32(tp->base_addr + CSR5)>>17)&0x07) == 4) {
+ /* Rx stopped due to out of buffers,
+ * restart it
+ */
+ iowrite32(0x01, tp->base_addr + CSR2);
+ }
+ }
+ return refilled;
+}
+
+#ifdef CONFIG_TULIP_NAPI
+
+void oom_timer(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *)data;
+ netif_rx_schedule(dev);
+}
+
+int tulip_poll(struct net_device *dev, int *budget)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ int entry = tp->cur_rx % RX_RING_SIZE;
+ int rx_work_limit = *budget;
+ int received = 0;
+
+ if (!netif_running(dev))
+ goto done;
+
+ if (rx_work_limit > dev->quota)
+ rx_work_limit = dev->quota;
+
+#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
+
+/* that one buffer is needed for mit activation; or might be a
+ bug in the ring buffer code; check later -- JHS*/
+
+ if (rx_work_limit >=RX_RING_SIZE) rx_work_limit--;
+#endif
+
+ if (tulip_debug > 4)
+ printk(KERN_DEBUG " In tulip_rx(), entry %d %8.8x.\n", entry,
+ tp->rx_ring[entry].status);
+
+ do {
+ if (ioread32(tp->base_addr + CSR5) == 0xffffffff) {
+ printk(KERN_DEBUG " In tulip_poll(), hardware disappeared.\n");
+ break;
+ }
+ /* Acknowledge current RX interrupt sources. */
+ iowrite32((RxIntr | RxNoBuf), tp->base_addr + CSR5);
+
+
+ /* If we own the next entry, it is a new packet. Send it up. */
+ while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) {
+ s32 status = le32_to_cpu(tp->rx_ring[entry].status);
+
+
+ if (tp->dirty_rx + RX_RING_SIZE == tp->cur_rx)
+ break;
+
+ if (tulip_debug > 5)
+ printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %8.8x.\n",
+ dev->name, entry, status);
+ if (--rx_work_limit < 0)
+ goto not_done;
+
+ if ((status & 0x38008300) != 0x0300) {
+ if ((status & 0x38000300) != 0x0300) {
+ /* Ingore earlier buffers. */
+ if ((status & 0xffff) != 0x7fff) {
+ if (tulip_debug > 1)
+ printk(KERN_WARNING "%s: Oversized Ethernet frame "
+ "spanned multiple buffers, status %8.8x!\n",
+ dev->name, status);
+ tp->stats.rx_length_errors++;
+ }
+ } else if (status & RxDescFatalErr) {
+ /* There was a fatal error. */
+ if (tulip_debug > 2)
+ printk(KERN_DEBUG "%s: Receive error, Rx status %8.8x.\n",
+ dev->name, status);
+ tp->stats.rx_errors++; /* end of a packet.*/
+ if (status & 0x0890) tp->stats.rx_length_errors++;
+ if (status & 0x0004) tp->stats.rx_frame_errors++;
+ if (status & 0x0002) tp->stats.rx_crc_errors++;
+ if (status & 0x0001) tp->stats.rx_fifo_errors++;
+ }
+ } else {
+ /* Omit the four octet CRC from the length. */
+ short pkt_len = ((status >> 16) & 0x7ff) - 4;
+ struct sk_buff *skb;
+
+#ifndef final_version
+ if (pkt_len > 1518) {
+ printk(KERN_WARNING "%s: Bogus packet size of %d (%#x).\n",
+ dev->name, pkt_len, pkt_len);
+ pkt_len = 1518;
+ tp->stats.rx_length_errors++;
+ }
+#endif
+ /* Check if the packet is long enough to accept without copying
+ to a minimally-sized skbuff. */
+ if (pkt_len < tulip_rx_copybreak
+ && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
+ skb->dev = dev;
+ skb_reserve(skb, 2); /* 16 byte align the IP header */
+ pci_dma_sync_single_for_cpu(tp->pdev,
+ tp->rx_buffers[entry].mapping,
+ pkt_len, PCI_DMA_FROMDEVICE);
+#if ! defined(__alpha__)
+ eth_copy_and_sum(skb, tp->rx_buffers[entry].skb->tail,
+ pkt_len, 0);
+ skb_put(skb, pkt_len);
+#else
+ memcpy(skb_put(skb, pkt_len),
+ tp->rx_buffers[entry].skb->tail,
+ pkt_len);
+#endif
+ pci_dma_sync_single_for_device(tp->pdev,
+ tp->rx_buffers[entry].mapping,
+ pkt_len, PCI_DMA_FROMDEVICE);
+ } else { /* Pass up the skb already on the Rx ring. */
+ char *temp = skb_put(skb = tp->rx_buffers[entry].skb,
+ pkt_len);
+
+#ifndef final_version
+ if (tp->rx_buffers[entry].mapping !=
+ le32_to_cpu(tp->rx_ring[entry].buffer1)) {
+ printk(KERN_ERR "%s: Internal fault: The skbuff addresses "
+ "do not match in tulip_rx: %08x vs. %08llx %p / %p.\n",
+ dev->name,
+ le32_to_cpu(tp->rx_ring[entry].buffer1),
+ (unsigned long long)tp->rx_buffers[entry].mapping,
+ skb->head, temp);
+ }
+#endif
+
+ pci_unmap_single(tp->pdev, tp->rx_buffers[entry].mapping,
+ PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
+
+ tp->rx_buffers[entry].skb = NULL;
+ tp->rx_buffers[entry].mapping = 0;
+ }
+ skb->protocol = eth_type_trans(skb, dev);
+
+ netif_receive_skb(skb);
+
+ dev->last_rx = jiffies;
+ tp->stats.rx_packets++;
+ tp->stats.rx_bytes += pkt_len;
+ }
+ received++;
+
+ entry = (++tp->cur_rx) % RX_RING_SIZE;
+ if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/4)
+ tulip_refill_rx(dev);
+
+ }
+
+ /* New ack strategy... irq does not ack Rx any longer
+ hopefully this helps */
+
+ /* Really bad things can happen here... If new packet arrives
+ * and an irq arrives (tx or just due to occasionally unset
+ * mask), it will be acked by irq handler, but new thread
+ * is not scheduled. It is major hole in design.
+ * No idea how to fix this if "playing with fire" will fail
+ * tomorrow (night 011029). If it will not fail, we won
+ * finally: amount of IO did not increase at all. */
+ } while ((ioread32(tp->base_addr + CSR5) & RxIntr));
+
+done:
+
+ #ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
+
+ /* We use this simplistic scheme for IM. It's proven by
+ real life installations. We can have IM enabled
+ continuesly but this would cause unnecessary latency.
+ Unfortunely we can't use all the NET_RX_* feedback here.
+ This would turn on IM for devices that is not contributing
+ to backlog congestion with unnecessary latency.
+
+ We monitor the the device RX-ring and have:
+
+ HW Interrupt Mitigation either ON or OFF.
+
+ ON: More then 1 pkt received (per intr.) OR we are dropping
+ OFF: Only 1 pkt received
+
+ Note. We only use min and max (0, 15) settings from mit_table */
+
+
+ if( tp->flags & HAS_INTR_MITIGATION) {
+ if( received > 1 ) {
+ if( ! tp->mit_on ) {
+ tp->mit_on = 1;
+ iowrite32(mit_table[MIT_TABLE], tp->base_addr + CSR11);
+ }
+ }
+ else {
+ if( tp->mit_on ) {
+ tp->mit_on = 0;
+ iowrite32(0, tp->base_addr + CSR11);
+ }
+ }
+ }
+
+#endif /* CONFIG_TULIP_NAPI_HW_MITIGATION */
+
+ dev->quota -= received;
+ *budget -= received;
+
+ tulip_refill_rx(dev);
+
+ /* If RX ring is not full we are out of memory. */
+ if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL) goto oom;
+
+ /* Remove us from polling list and enable RX intr. */
+
+ netif_rx_complete(dev);
+ iowrite32(tulip_tbl[tp->chip_id].valid_intrs, tp->base_addr+CSR7);
+
+ /* The last op happens after poll completion. Which means the following:
+ * 1. it can race with disabling irqs in irq handler
+ * 2. it can race with dise/enabling irqs in other poll threads
+ * 3. if an irq raised after beginning loop, it will be immediately
+ * triggered here.
+ *
+ * Summarizing: the logic results in some redundant irqs both
+ * due to races in masking and due to too late acking of already
+ * processed irqs. But it must not result in losing events.
+ */
+
+ return 0;
+
+ not_done:
+ if (!received) {
+
+ received = dev->quota; /* Not to happen */
+ }
+ dev->quota -= received;
+ *budget -= received;
+
+ if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/2 ||
+ tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
+ tulip_refill_rx(dev);
+
+ if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL) goto oom;
+
+ return 1;
+
+
+ oom: /* Executed with RX ints disabled */
+
+
+ /* Start timer, stop polling, but do not enable rx interrupts. */
+ mod_timer(&tp->oom_timer, jiffies+1);
+
+ /* Think: timer_pending() was an explicit signature of bug.
+ * Timer can be pending now but fired and completed
+ * before we did netif_rx_complete(). See? We would lose it. */
+
+ /* remove ourselves from the polling list */
+ netif_rx_complete(dev);
+
+ return 0;
+}
+
+#else /* CONFIG_TULIP_NAPI */
+
+static int tulip_rx(struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ int entry = tp->cur_rx % RX_RING_SIZE;
+ int rx_work_limit = tp->dirty_rx + RX_RING_SIZE - tp->cur_rx;
+ int received = 0;
+
+ if (tulip_debug > 4)
+ printk(KERN_DEBUG " In tulip_rx(), entry %d %8.8x.\n", entry,
+ tp->rx_ring[entry].status);
+ /* If we own the next entry, it is a new packet. Send it up. */
+ while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) {
+ s32 status = le32_to_cpu(tp->rx_ring[entry].status);
+
+ if (tulip_debug > 5)
+ printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %8.8x.\n",
+ dev->name, entry, status);
+ if (--rx_work_limit < 0)
+ break;
+ if ((status & 0x38008300) != 0x0300) {
+ if ((status & 0x38000300) != 0x0300) {
+ /* Ingore earlier buffers. */
+ if ((status & 0xffff) != 0x7fff) {
+ if (tulip_debug > 1)
+ printk(KERN_WARNING "%s: Oversized Ethernet frame "
+ "spanned multiple buffers, status %8.8x!\n",
+ dev->name, status);
+ tp->stats.rx_length_errors++;
+ }
+ } else if (status & RxDescFatalErr) {
+ /* There was a fatal error. */
+ if (tulip_debug > 2)
+ printk(KERN_DEBUG "%s: Receive error, Rx status %8.8x.\n",
+ dev->name, status);
+ tp->stats.rx_errors++; /* end of a packet.*/
+ if (status & 0x0890) tp->stats.rx_length_errors++;
+ if (status & 0x0004) tp->stats.rx_frame_errors++;
+ if (status & 0x0002) tp->stats.rx_crc_errors++;
+ if (status & 0x0001) tp->stats.rx_fifo_errors++;
+ }
+ } else {
+ /* Omit the four octet CRC from the length. */
+ short pkt_len = ((status >> 16) & 0x7ff) - 4;
+ struct sk_buff *skb;
+
+#ifndef final_version
+ if (pkt_len > 1518) {
+ printk(KERN_WARNING "%s: Bogus packet size of %d (%#x).\n",
+ dev->name, pkt_len, pkt_len);
+ pkt_len = 1518;
+ tp->stats.rx_length_errors++;
+ }
+#endif
+
+ /* Check if the packet is long enough to accept without copying
+ to a minimally-sized skbuff. */
+ if (pkt_len < tulip_rx_copybreak
+ && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
+ skb->dev = dev;
+ skb_reserve(skb, 2); /* 16 byte align the IP header */
+ pci_dma_sync_single_for_cpu(tp->pdev,
+ tp->rx_buffers[entry].mapping,
+ pkt_len, PCI_DMA_FROMDEVICE);
+#if ! defined(__alpha__)
+ eth_copy_and_sum(skb, tp->rx_buffers[entry].skb->tail,
+ pkt_len, 0);
+ skb_put(skb, pkt_len);
+#else
+ memcpy(skb_put(skb, pkt_len),
+ tp->rx_buffers[entry].skb->tail,
+ pkt_len);
+#endif
+ pci_dma_sync_single_for_device(tp->pdev,
+ tp->rx_buffers[entry].mapping,
+ pkt_len, PCI_DMA_FROMDEVICE);
+ } else { /* Pass up the skb already on the Rx ring. */
+ char *temp = skb_put(skb = tp->rx_buffers[entry].skb,
+ pkt_len);
+
+#ifndef final_version
+ if (tp->rx_buffers[entry].mapping !=
+ le32_to_cpu(tp->rx_ring[entry].buffer1)) {
+ printk(KERN_ERR "%s: Internal fault: The skbuff addresses "
+ "do not match in tulip_rx: %08x vs. %Lx %p / %p.\n",
+ dev->name,
+ le32_to_cpu(tp->rx_ring[entry].buffer1),
+ (long long)tp->rx_buffers[entry].mapping,
+ skb->head, temp);
+ }
+#endif
+
+ pci_unmap_single(tp->pdev, tp->rx_buffers[entry].mapping,
+ PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
+
+ tp->rx_buffers[entry].skb = NULL;
+ tp->rx_buffers[entry].mapping = 0;
+ }
+ skb->protocol = eth_type_trans(skb, dev);
+
+ netif_rx(skb);
+
+ dev->last_rx = jiffies;
+ tp->stats.rx_packets++;
+ tp->stats.rx_bytes += pkt_len;
+ }
+ received++;
+ entry = (++tp->cur_rx) % RX_RING_SIZE;
+ }
+ return received;
+}
+#endif /* CONFIG_TULIP_NAPI */
+
+static inline unsigned int phy_interrupt (struct net_device *dev)
+{
+#ifdef __hppa__
+ struct tulip_private *tp = netdev_priv(dev);
+ int csr12 = ioread32(tp->base_addr + CSR12) & 0xff;
+
+ if (csr12 != tp->csr12_shadow) {
+ /* ack interrupt */
+ iowrite32(csr12 | 0x02, tp->base_addr + CSR12);
+ tp->csr12_shadow = csr12;
+ /* do link change stuff */
+ spin_lock(&tp->lock);
+ tulip_check_duplex(dev);
+ spin_unlock(&tp->lock);
+ /* clear irq ack bit */
+ iowrite32(csr12 & ~0x02, tp->base_addr + CSR12);
+
+ return 1;
+ }
+#endif
+
+ return 0;
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+ after the Tx thread. */
+irqreturn_t tulip_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *)dev_instance;
+ struct tulip_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->base_addr;
+ int csr5;
+ int missed;
+ int rx = 0;
+ int tx = 0;
+ int oi = 0;
+ int maxrx = RX_RING_SIZE;
+ int maxtx = TX_RING_SIZE;
+ int maxoi = TX_RING_SIZE;
+#ifdef CONFIG_TULIP_NAPI
+ int rxd = 0;
+#else
+ int entry;
+#endif
+ unsigned int work_count = tulip_max_interrupt_work;
+ unsigned int handled = 0;
+
+ /* Let's see whether the interrupt really is for us */
+ csr5 = ioread32(ioaddr + CSR5);
+
+ if (tp->flags & HAS_PHY_IRQ)
+ handled = phy_interrupt (dev);
+
+ if ((csr5 & (NormalIntr|AbnormalIntr)) == 0)
+ return IRQ_RETVAL(handled);
+
+ tp->nir++;
+
+ do {
+
+#ifdef CONFIG_TULIP_NAPI
+
+ if (!rxd && (csr5 & (RxIntr | RxNoBuf))) {
+ rxd++;
+ /* Mask RX intrs and add the device to poll list. */
+ iowrite32(tulip_tbl[tp->chip_id].valid_intrs&~RxPollInt, ioaddr + CSR7);
+ netif_rx_schedule(dev);
+
+ if (!(csr5&~(AbnormalIntr|NormalIntr|RxPollInt|TPLnkPass)))
+ break;
+ }
+
+ /* Acknowledge the interrupt sources we handle here ASAP
+ the poll function does Rx and RxNoBuf acking */
+
+ iowrite32(csr5 & 0x0001ff3f, ioaddr + CSR5);
+
+#else
+ /* Acknowledge all of the current interrupt sources ASAP. */
+ iowrite32(csr5 & 0x0001ffff, ioaddr + CSR5);
+
+
+ if (csr5 & (RxIntr | RxNoBuf)) {
+ rx += tulip_rx(dev);
+ tulip_refill_rx(dev);
+ }
+
+#endif /* CONFIG_TULIP_NAPI */
+
+ if (tulip_debug > 4)
+ printk(KERN_DEBUG "%s: interrupt csr5=%#8.8x new csr5=%#8.8x.\n",
+ dev->name, csr5, ioread32(ioaddr + CSR5));
+
+
+ if (csr5 & (TxNoBuf | TxDied | TxIntr | TimerInt)) {
+ unsigned int dirty_tx;
+
+ spin_lock(&tp->lock);
+
+ for (dirty_tx = tp->dirty_tx; tp->cur_tx - dirty_tx > 0;
+ dirty_tx++) {
+ int entry = dirty_tx % TX_RING_SIZE;
+ int status = le32_to_cpu(tp->tx_ring[entry].status);
+
+ if (status < 0)
+ break; /* It still has not been Txed */
+
+ /* Check for Rx filter setup frames. */
+ if (tp->tx_buffers[entry].skb == NULL) {
+ /* test because dummy frames not mapped */
+ if (tp->tx_buffers[entry].mapping)
+ pci_unmap_single(tp->pdev,
+ tp->tx_buffers[entry].mapping,
+ sizeof(tp->setup_frame),
+ PCI_DMA_TODEVICE);
+ continue;
+ }
+
+ if (status & 0x8000) {
+ /* There was an major error, log it. */
+#ifndef final_version
+ if (tulip_debug > 1)
+ printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
+ dev->name, status);
+#endif
+ tp->stats.tx_errors++;
+ if (status & 0x4104) tp->stats.tx_aborted_errors++;
+ if (status & 0x0C00) tp->stats.tx_carrier_errors++;
+ if (status & 0x0200) tp->stats.tx_window_errors++;
+ if (status & 0x0002) tp->stats.tx_fifo_errors++;
+ if ((status & 0x0080) && tp->full_duplex == 0)
+ tp->stats.tx_heartbeat_errors++;
+ } else {
+ tp->stats.tx_bytes +=
+ tp->tx_buffers[entry].skb->len;
+ tp->stats.collisions += (status >> 3) & 15;
+ tp->stats.tx_packets++;
+ }
+
+ pci_unmap_single(tp->pdev, tp->tx_buffers[entry].mapping,
+ tp->tx_buffers[entry].skb->len,
+ PCI_DMA_TODEVICE);
+
+ /* Free the original skb. */
+ dev_kfree_skb_irq(tp->tx_buffers[entry].skb);
+ tp->tx_buffers[entry].skb = NULL;
+ tp->tx_buffers[entry].mapping = 0;
+ tx++;
+ }
+
+#ifndef final_version
+ if (tp->cur_tx - dirty_tx > TX_RING_SIZE) {
+ printk(KERN_ERR "%s: Out-of-sync dirty pointer, %d vs. %d.\n",
+ dev->name, dirty_tx, tp->cur_tx);
+ dirty_tx += TX_RING_SIZE;
+ }
+#endif
+
+ if (tp->cur_tx - dirty_tx < TX_RING_SIZE - 2)
+ netif_wake_queue(dev);
+
+ tp->dirty_tx = dirty_tx;
+ if (csr5 & TxDied) {
+ if (tulip_debug > 2)
+ printk(KERN_WARNING "%s: The transmitter stopped."
+ " CSR5 is %x, CSR6 %x, new CSR6 %x.\n",
+ dev->name, csr5, ioread32(ioaddr + CSR6), tp->csr6);
+ tulip_restart_rxtx(tp);
+ }
+ spin_unlock(&tp->lock);
+ }
+
+ /* Log errors. */
+ if (csr5 & AbnormalIntr) { /* Abnormal error summary bit. */
+ if (csr5 == 0xffffffff)
+ break;
+ if (csr5 & TxJabber) tp->stats.tx_errors++;
+ if (csr5 & TxFIFOUnderflow) {
+ if ((tp->csr6 & 0xC000) != 0xC000)
+ tp->csr6 += 0x4000; /* Bump up the Tx threshold */
+ else
+ tp->csr6 |= 0x00200000; /* Store-n-forward. */
+ /* Restart the transmit process. */
+ tulip_restart_rxtx(tp);
+ iowrite32(0, ioaddr + CSR1);
+ }
+ if (csr5 & (RxDied | RxNoBuf)) {
+ if (tp->flags & COMET_MAC_ADDR) {
+ iowrite32(tp->mc_filter[0], ioaddr + 0xAC);
+ iowrite32(tp->mc_filter[1], ioaddr + 0xB0);
+ }
+ }
+ if (csr5 & RxDied) { /* Missed a Rx frame. */
+ tp->stats.rx_missed_errors += ioread32(ioaddr + CSR8) & 0xffff;
+ tp->stats.rx_errors++;
+ tulip_start_rxtx(tp);
+ }
+ /*
+ * NB: t21142_lnk_change() does a del_timer_sync(), so be careful if this
+ * call is ever done under the spinlock
+ */
+ if (csr5 & (TPLnkPass | TPLnkFail | 0x08000000)) {
+ if (tp->link_change)
+ (tp->link_change)(dev, csr5);
+ }
+ if (csr5 & SytemError) {
+ int error = (csr5 >> 23) & 7;
+ /* oops, we hit a PCI error. The code produced corresponds
+ * to the reason:
+ * 0 - parity error
+ * 1 - master abort
+ * 2 - target abort
+ * Note that on parity error, we should do a software reset
+ * of the chip to get it back into a sane state (according
+ * to the 21142/3 docs that is).
+ * -- rmk
+ */
+ printk(KERN_ERR "%s: (%lu) System Error occurred (%d)\n",
+ dev->name, tp->nir, error);
+ }
+ /* Clear all error sources, included undocumented ones! */
+ iowrite32(0x0800f7ba, ioaddr + CSR5);
+ oi++;
+ }
+ if (csr5 & TimerInt) {
+
+ if (tulip_debug > 2)
+ printk(KERN_ERR "%s: Re-enabling interrupts, %8.8x.\n",
+ dev->name, csr5);
+ iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7);
+ tp->ttimer = 0;
+ oi++;
+ }
+ if (tx > maxtx || rx > maxrx || oi > maxoi) {
+ if (tulip_debug > 1)
+ printk(KERN_WARNING "%s: Too much work during an interrupt, "
+ "csr5=0x%8.8x. (%lu) (%d,%d,%d)\n", dev->name, csr5, tp->nir, tx, rx, oi);
+
+ /* Acknowledge all interrupt sources. */
+ iowrite32(0x8001ffff, ioaddr + CSR5);
+ if (tp->flags & HAS_INTR_MITIGATION) {
+ /* Josip Loncaric at ICASE did extensive experimentation
+ to develop a good interrupt mitigation setting.*/
+ iowrite32(0x8b240000, ioaddr + CSR11);
+ } else if (tp->chip_id == LC82C168) {
+ /* the LC82C168 doesn't have a hw timer.*/
+ iowrite32(0x00, ioaddr + CSR7);
+ mod_timer(&tp->timer, RUN_AT(HZ/50));
+ } else {
+ /* Mask all interrupting sources, set timer to
+ re-enable. */
+ iowrite32(((~csr5) & 0x0001ebef) | AbnormalIntr | TimerInt, ioaddr + CSR7);
+ iowrite32(0x0012, ioaddr + CSR11);
+ }
+ break;
+ }
+
+ work_count--;
+ if (work_count == 0)
+ break;
+
+ csr5 = ioread32(ioaddr + CSR5);
+
+#ifdef CONFIG_TULIP_NAPI
+ if (rxd)
+ csr5 &= ~RxPollInt;
+ } while ((csr5 & (TxNoBuf |
+ TxDied |
+ TxIntr |
+ TimerInt |
+ /* Abnormal intr. */
+ RxDied |
+ TxFIFOUnderflow |
+ TxJabber |
+ TPLnkFail |
+ SytemError )) != 0);
+#else
+ } while ((csr5 & (NormalIntr|AbnormalIntr)) != 0);
+
+ tulip_refill_rx(dev);
+
+ /* check if the card is in suspend mode */
+ entry = tp->dirty_rx % RX_RING_SIZE;
+ if (tp->rx_buffers[entry].skb == NULL) {
+ if (tulip_debug > 1)
+ printk(KERN_WARNING "%s: in rx suspend mode: (%lu) (tp->cur_rx = %u, ttimer = %d, rx = %d) go/stay in suspend mode\n", dev->name, tp->nir, tp->cur_rx, tp->ttimer, rx);
+ if (tp->chip_id == LC82C168) {
+ iowrite32(0x00, ioaddr + CSR7);
+ mod_timer(&tp->timer, RUN_AT(HZ/50));
+ } else {
+ if (tp->ttimer == 0 || (ioread32(ioaddr + CSR11) & 0xffff) == 0) {
+ if (tulip_debug > 1)
+ printk(KERN_WARNING "%s: in rx suspend mode: (%lu) set timer\n", dev->name, tp->nir);
+ iowrite32(tulip_tbl[tp->chip_id].valid_intrs | TimerInt,
+ ioaddr + CSR7);
+ iowrite32(TimerInt, ioaddr + CSR5);
+ iowrite32(12, ioaddr + CSR11);
+ tp->ttimer = 1;
+ }
+ }
+ }
+#endif /* CONFIG_TULIP_NAPI */
+
+ if ((missed = ioread32(ioaddr + CSR8) & 0x1ffff)) {
+ tp->stats.rx_dropped += missed & 0x10000 ? 0x10000 : missed;
+ }
+
+ if (tulip_debug > 4)
+ printk(KERN_DEBUG "%s: exiting interrupt, csr5=%#4.4x.\n",
+ dev->name, ioread32(ioaddr + CSR5));
+
+ return IRQ_HANDLED;
+}