diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/ar9003_mci.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/ar9003_mci.c | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c index 8d7efd80d97a..3f0543e55d9b 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c @@ -458,7 +458,7 @@ static void ar9003_mci_observation_set_up(struct ath_hw *ah) } else return; - REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, AR_GPIO_JTAG_DISABLE); + REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL(ah), AR_GPIO_JTAG_DISABLE); REG_RMW_FIELD(ah, AR_PHY_GLB_CONTROL, AR_GLB_DS_JTAG_DISABLE, 1); REG_RMW_FIELD(ah, AR_PHY_GLB_CONTROL, AR_GLB_WLAN_UART_INTF_EN, 0); @@ -466,12 +466,12 @@ static void ar9003_mci_observation_set_up(struct ath_hw *ah) REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2, AR_BTCOEX_CTRL2_GPIO_OBS_SEL, 0); REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2, AR_BTCOEX_CTRL2_MAC_BB_OBS_SEL, 1); - REG_WRITE(ah, AR_OBS, 0x4b); + REG_WRITE(ah, AR_OBS(ah), 0x4b); REG_RMW_FIELD(ah, AR_DIAG_SW, AR_DIAG_OBS_PT_SEL1, 0x03); REG_RMW_FIELD(ah, AR_DIAG_SW, AR_DIAG_OBS_PT_SEL2, 0x01); REG_RMW_FIELD(ah, AR_MACMISC, AR_MACMISC_MISC_OBS_BUS_LSB, 0x02); REG_RMW_FIELD(ah, AR_MACMISC, AR_MACMISC_MISC_OBS_BUS_MSB, 0x03); - REG_RMW_FIELD(ah, AR_PHY_TEST_CTL_STATUS, + REG_RMW_FIELD(ah, AR_PHY_TEST_CTL_STATUS(ah), AR_PHY_TEST_CTL_DEBUGPORT_SEL, 0x07); } @@ -637,7 +637,7 @@ static u32 ar9003_mci_wait_for_gpm(struct ath_hw *ah, u8 gpm_type, * same time. Since BT's calibration doesn't happen * that often, we'll let BT completes calibration then * we continue to wait for cal_grant from BT. - * Orginal: Wait BT_CAL_GRANT. + * Original: Wait BT_CAL_GRANT. * New: Receive BT_CAL_REQ -> send WLAN_CAL_GRANT->wait * BT_CAL_DONE -> Wait BT_CAL_GRANT. */ @@ -747,7 +747,7 @@ int ar9003_mci_end_reset(struct ath_hw *ah, struct ath9k_channel *chan, * BT is sleeping. Check if BT wakes up during * WLAN calibration. If BT wakes up during * WLAN calibration, need to go through all - * message exchanges again and recal. + * message exchanges again and recalibrate. */ REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW, (AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET | |