1 files changed, 182 insertions, 133 deletions

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
index a4308c6e72d7..f0129d10d2b9 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
@@ -1,17 +1,6 @@
+// SPDX-License-Identifier: ISC
 /*
  * Copyright (c) 2011 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
 #include <linux/kernel.h>
@@ -128,13 +117,6 @@ struct bootrom_id_le {
 	__le32 boardrev;	/* Board revision */
 };
 
-struct brcmf_usb_image {
-	struct list_head list;
-	s8 *fwname;
-	u8 *image;
-	int image_len;
-};
-
 struct brcmf_usbdev_info {
 	struct brcmf_usbdev bus_pub; /* MUST BE FIRST */
 	spinlock_t qlock;
@@ -160,7 +142,7 @@ struct brcmf_usbdev_info {
 
 	struct usb_device *usbdev;
 	struct device *dev;
-	struct mutex dev_init_lock;
+	struct completion dev_init_done;
 
 	int ctl_in_pipe, ctl_out_pipe;
 	struct urb *ctl_urb; /* URB for control endpoint */
@@ -175,7 +157,6 @@ struct brcmf_usbdev_info {
 
 	struct urb *bulk_urb; /* used for FW download */
 
-	bool wowl_enabled;
 	struct brcmf_mp_device *settings;
 };
 
@@ -323,27 +304,43 @@ static int brcmf_usb_tx_ctlpkt(struct device *dev, u8 *buf, u32 len)
 	int err = 0;
 	int timeout = 0;
 	struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
+	struct usb_interface *intf = to_usb_interface(dev);
 
 	brcmf_dbg(USB, "Enter\n");
-	if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP)
-		return -EIO;
 
-	if (test_and_set_bit(0, &devinfo->ctl_op))
-		return -EIO;
+	err = usb_autopm_get_interface(intf);
+	if (err)
+		goto out;
+
+	if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP) {
+		err = -EIO;
+		goto fail;
+	}
+
+	if (test_and_set_bit(0, &devinfo->ctl_op)) {
+		err = -EIO;
+		goto fail;
+	}
 
 	devinfo->ctl_completed = false;
 	err = brcmf_usb_send_ctl(devinfo, buf, len);
 	if (err) {
 		brcmf_err("fail %d bytes: %d\n", err, len);
 		clear_bit(0, &devinfo->ctl_op);
-		return err;
+		goto fail;
 	}
 	timeout = brcmf_usb_ioctl_resp_wait(devinfo);
-	clear_bit(0, &devinfo->ctl_op);
 	if (!timeout) {
 		brcmf_err("Txctl wait timed out\n");
+		usb_kill_urb(devinfo->ctl_urb);
 		err = -EIO;
+		goto fail;
 	}
+	clear_bit(0, &devinfo->ctl_op);
+
+fail:
+	usb_autopm_put_interface(intf);
+out:
 	return err;
 }
 
@@ -352,32 +349,46 @@ static int brcmf_usb_rx_ctlpkt(struct device *dev, u8 *buf, u32 len)
 	int err = 0;
 	int timeout = 0;
 	struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
+	struct usb_interface *intf = to_usb_interface(dev);
 
 	brcmf_dbg(USB, "Enter\n");
-	if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP)
-		return -EIO;
 
-	if (test_and_set_bit(0, &devinfo->ctl_op))
-		return -EIO;
+	err = usb_autopm_get_interface(intf);
+	if (err)
+		goto out;
+
+	if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP) {
+		err = -EIO;
+		goto fail;
+	}
+
+	if (test_and_set_bit(0, &devinfo->ctl_op)) {
+		err = -EIO;
+		goto fail;
+	}
 
 	devinfo->ctl_completed = false;
 	err = brcmf_usb_recv_ctl(devinfo, buf, len);
 	if (err) {
 		brcmf_err("fail %d bytes: %d\n", err, len);
 		clear_bit(0, &devinfo->ctl_op);
-		return err;
+		goto fail;
 	}
 	timeout = brcmf_usb_ioctl_resp_wait(devinfo);
 	err = devinfo->ctl_urb_status;
-	clear_bit(0, &devinfo->ctl_op);
 	if (!timeout) {
 		brcmf_err("rxctl wait timed out\n");
+		usb_kill_urb(devinfo->ctl_urb);
 		err = -EIO;
+		goto fail;
 	}
+	clear_bit(0, &devinfo->ctl_op);
+fail:
+	usb_autopm_put_interface(intf);
 	if (!err)
 		return devinfo->ctl_urb_actual_length;
-	else
-		return err;
+out:
+	return err;
 }
 
 static struct brcmf_usbreq *brcmf_usb_deq(struct brcmf_usbdev_info *devinfo,
@@ -441,26 +452,22 @@ fail:
 			usb_free_urb(req->urb);
 		list_del(q->next);
 	}
+	kfree(reqs);
 	return NULL;
 
 }
 
-static void brcmf_usb_free_q(struct list_head *q, bool pending)
+static void brcmf_usb_free_q(struct list_head *q)
 {
 	struct brcmf_usbreq *req, *next;
-	int i = 0;
+
 	list_for_each_entry_safe(req, next, q, list) {
 		if (!req->urb) {
 			brcmf_err("bad req\n");
 			break;
 		}
-		i++;
-		if (pending) {
-			usb_kill_urb(req->urb);
-		} else {
-			usb_free_urb(req->urb);
-			list_del_init(&req->list);
-		}
+		usb_free_urb(req->urb);
+		list_del_init(&req->list);
 	}
 }
 
@@ -508,17 +515,19 @@ static void brcmf_usb_rx_complete(struct urb *urb)
 	skb = req->skb;
 	req->skb = NULL;
 
-	/* zero lenght packets indicate usb "failure". Do not refill */
+	/* zero length packets indicate usb "failure". Do not refill */
 	if (urb->status != 0 || !urb->actual_length) {
 		brcmu_pkt_buf_free_skb(skb);
 		brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL);
 		return;
 	}
 
-	if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP) {
+	if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP ||
+	    devinfo->bus_pub.state == BRCMFMAC_USB_STATE_SLEEP) {
 		skb_put(skb, urb->actual_length);
-		brcmf_rx_frame(devinfo->dev, skb, true);
+		brcmf_rx_frame(devinfo->dev, skb, true, true);
 		brcmf_usb_rx_refill(devinfo, req);
+		usb_mark_last_busy(urb->dev);
 	} else {
 		brcmu_pkt_buf_free_skb(skb);
 		brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL);
@@ -575,7 +584,6 @@ static void
 brcmf_usb_state_change(struct brcmf_usbdev_info *devinfo, int state)
 {
 	struct brcmf_bus *bcmf_bus = devinfo->bus_pub.bus;
-	int old_state;
 
 	brcmf_dbg(USB, "Enter, current state=%d, new state=%d\n",
 		  devinfo->bus_pub.state, state);
@@ -583,7 +591,6 @@ brcmf_usb_state_change(struct brcmf_usbdev_info *devinfo, int state)
 	if (devinfo->bus_pub.state == state)
 		return;
 
-	old_state = devinfo->bus_pub.state;
 	devinfo->bus_pub.state = state;
 
 	/* update state of upper layer */
@@ -604,6 +611,11 @@ static int brcmf_usb_tx(struct device *dev, struct sk_buff *skb)
 	struct brcmf_usbreq  *req;
 	int ret;
 	unsigned long flags;
+	struct usb_interface *intf = to_usb_interface(dev);
+
+	ret = usb_autopm_get_interface(intf);
+	if (ret)
+		goto out;
 
 	brcmf_dbg(USB, "Enter, skb=%p\n", skb);
 	if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP) {
@@ -642,9 +654,10 @@ static int brcmf_usb_tx(struct device *dev, struct sk_buff *skb)
 		devinfo->tx_flowblock = true;
 	}
 	spin_unlock_irqrestore(&devinfo->tx_flowblock_lock, flags);
-	return 0;
 
 fail:
+	usb_autopm_put_interface(intf);
+out:
 	return ret;
 }
 
@@ -684,12 +697,18 @@ static int brcmf_usb_up(struct device *dev)
 
 static void brcmf_cancel_all_urbs(struct brcmf_usbdev_info *devinfo)
 {
+	int i;
+
 	if (devinfo->ctl_urb)
 		usb_kill_urb(devinfo->ctl_urb);
 	if (devinfo->bulk_urb)
 		usb_kill_urb(devinfo->bulk_urb);
-	brcmf_usb_free_q(&devinfo->tx_postq, true);
-	brcmf_usb_free_q(&devinfo->rx_postq, true);
+	if (devinfo->tx_reqs)
+		for (i = 0; i < devinfo->bus_pub.ntxq; i++)
+			usb_kill_urb(devinfo->tx_reqs[i].urb);
+	if (devinfo->rx_reqs)
+		for (i = 0; i < devinfo->bus_pub.nrxq; i++)
+			usb_kill_urb(devinfo->rx_reqs[i].urb);
 }
 
 static void brcmf_usb_down(struct device *dev)
@@ -722,15 +741,19 @@ static int brcmf_usb_dl_cmd(struct brcmf_usbdev_info *devinfo, u8 cmd,
 			    void *buffer, int buflen)
 {
 	int ret;
-	char *tmpbuf;
+	char *tmpbuf = NULL;
 	u16 size;
 
-	if ((!devinfo) || (devinfo->ctl_urb == NULL))
-		return -EINVAL;
+	if (!devinfo || !devinfo->ctl_urb) {
+		ret = -EINVAL;
+		goto err;
+	}
 
 	tmpbuf = kmalloc(buflen, GFP_ATOMIC);
-	if (!tmpbuf)
-		return -ENOMEM;
+	if (!tmpbuf) {
+		ret = -ENOMEM;
+		goto err;
+	}
 
 	size = buflen;
 	devinfo->ctl_urb->transfer_buffer_length = size;
@@ -751,18 +774,23 @@ static int brcmf_usb_dl_cmd(struct brcmf_usbdev_info *devinfo, u8 cmd,
 	ret = usb_submit_urb(devinfo->ctl_urb, GFP_ATOMIC);
 	if (ret < 0) {
 		brcmf_err("usb_submit_urb failed %d\n", ret);
-		goto finalize;
+		goto err;
 	}
 
 	if (!brcmf_usb_ioctl_resp_wait(devinfo)) {
 		usb_kill_urb(devinfo->ctl_urb);
 		ret = -ETIMEDOUT;
+		goto err;
 	} else {
 		memcpy(buffer, tmpbuf, buflen);
 	}
 
-finalize:
 	kfree(tmpbuf);
+	return 0;
+
+err:
+	kfree(tmpbuf);
+	brcmf_err("dl cmd %u failed: err=%d\n", cmd, ret);
 	return ret;
 }
 
@@ -877,14 +905,16 @@ brcmf_usb_dl_writeimage(struct brcmf_usbdev_info *devinfo, u8 *fw, int fwlen)
 	}
 
 	/* 1) Prepare USB boot loader for runtime image */
-	brcmf_usb_dl_cmd(devinfo, DL_START, &state, sizeof(state));
+	err = brcmf_usb_dl_cmd(devinfo, DL_START, &state, sizeof(state));
+	if (err)
+		goto fail;
 
 	rdlstate = le32_to_cpu(state.state);
 	rdlbytes = le32_to_cpu(state.bytes);
 
 	/* 2) Check we are in the Waiting state */
 	if (rdlstate != DL_WAITING) {
-		brcmf_err("Failed to DL_START\n");
+		brcmf_err("Invalid DL state: %u\n", rdlstate);
 		err = -EINVAL;
 		goto fail;
 	}
@@ -897,10 +927,7 @@ brcmf_usb_dl_writeimage(struct brcmf_usbdev_info *devinfo, u8 *fw, int fwlen)
 		/* Wait until the usb device reports it received all
 		 * the bytes we sent */
 		if ((rdlbytes == sent) && (rdlbytes != dllen)) {
-			if ((dllen-sent) < TRX_RDL_CHUNK)
-				sendlen = dllen-sent;
-			else
-				sendlen = TRX_RDL_CHUNK;
+			sendlen = min(dllen - sent, TRX_RDL_CHUNK);
 
 			/* simply avoid having to send a ZLP by ensuring we
 			 * never have an even
@@ -1002,20 +1029,32 @@ static int
 brcmf_usb_fw_download(struct brcmf_usbdev_info *devinfo)
 {
 	int err;
+	struct usb_interface *intf;
 
 	brcmf_dbg(USB, "Enter\n");
-	if (devinfo == NULL)
-		return -ENODEV;
+	if (!devinfo) {
+		err = -ENODEV;
+		goto out;
+	}
 
 	if (!devinfo->image) {
 		brcmf_err("No firmware!\n");
-		return -ENOENT;
+		err = -ENOENT;
+		goto out;
 	}
 
+	intf = to_usb_interface(devinfo->dev);
+	err = usb_autopm_get_interface(intf);
+	if (err)
+		goto out;
+
 	err = brcmf_usb_dlstart(devinfo,
 		(u8 *)devinfo->image, devinfo->image_len);
 	if (err == 0)
 		err = brcmf_usb_dlrun(devinfo);
+
+	usb_autopm_put_interface(intf);
+out:
 	return err;
 }
 
@@ -1025,8 +1064,8 @@ static void brcmf_usb_detach(struct brcmf_usbdev_info *devinfo)
 	brcmf_dbg(USB, "Enter, devinfo %p\n", devinfo);
 
 	/* free the URBS */
-	brcmf_usb_free_q(&devinfo->rx_freeq, false);
-	brcmf_usb_free_q(&devinfo->tx_freeq, false);
+	brcmf_usb_free_q(&devinfo->rx_freeq);
+	brcmf_usb_free_q(&devinfo->tx_freeq);
 
 	usb_free_urb(devinfo->ctl_urb);
 	usb_free_urb(devinfo->bulk_urb);
@@ -1116,36 +1155,11 @@ error:
 	return NULL;
 }
 
-static void brcmf_usb_wowl_config(struct device *dev, bool enabled)
+static int brcmf_usb_get_blob(struct device *dev, const struct firmware **fw,
+			      enum brcmf_blob_type type)
 {
-	struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
-
-	brcmf_dbg(USB, "Configuring WOWL, enabled=%d\n", enabled);
-	devinfo->wowl_enabled = enabled;
-	if (enabled)
-		device_set_wakeup_enable(devinfo->dev, true);
-	else
-		device_set_wakeup_enable(devinfo->dev, false);
-}
-
-static
-int brcmf_usb_get_fwname(struct device *dev, const char *ext, u8 *fw_name)
-{
-	struct brcmf_bus *bus = dev_get_drvdata(dev);
-	struct brcmf_fw_request *fwreq;
-	struct brcmf_fw_name fwnames[] = {
-		{ ext, fw_name },
-	};
-
-	fwreq = brcmf_fw_alloc_request(bus->chip, bus->chiprev,
-				       brcmf_usb_fwnames,
-				       ARRAY_SIZE(brcmf_usb_fwnames),
-				       fwnames, ARRAY_SIZE(fwnames));
-	if (!fwreq)
-		return -ENOMEM;
-
-	kfree(fwreq);
-	return 0;
+	/* No blobs for USB devices... */
+	return -ENOENT;
 }
 
 static const struct brcmf_bus_ops brcmf_usb_bus_ops = {
@@ -1154,8 +1168,7 @@ static const struct brcmf_bus_ops brcmf_usb_bus_ops = {
 	.txdata = brcmf_usb_tx,
 	.txctl = brcmf_usb_tx_ctlpkt,
 	.rxctl = brcmf_usb_rx_ctlpkt,
-	.wowl_config = brcmf_usb_wowl_config,
-	.get_fwname = brcmf_usb_get_fwname,
+	.get_blob = brcmf_usb_get_blob,
 };
 
 #define BRCMF_USB_FW_CODE	0
@@ -1190,16 +1203,20 @@ static void brcmf_usb_probe_phase2(struct device *dev, int ret,
 	if (ret)
 		goto error;
 
+	ret = brcmf_alloc(devinfo->dev, devinfo->settings);
+	if (ret)
+		goto error;
+
 	/* Attach to the common driver interface */
-	ret = brcmf_attach(devinfo->dev, devinfo->settings);
+	ret = brcmf_attach(devinfo->dev);
 	if (ret)
 		goto error;
 
-	mutex_unlock(&devinfo->dev_init_lock);
+	complete(&devinfo->dev_init_done);
 	return;
 error:
 	brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), ret);
-	mutex_unlock(&devinfo->dev_init_lock);
+	complete(&devinfo->dev_init_done);
 	device_release_driver(dev);
 }
 
@@ -1224,10 +1241,11 @@ brcmf_usb_prepare_fw_request(struct brcmf_usbdev_info *devinfo)
 	return fwreq;
 }
 
-static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo)
+static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo,
+			      enum brcmf_fwvendor fwvid)
 {
-	struct brcmf_bus *bus = NULL;
-	struct brcmf_usbdev *bus_pub = NULL;
+	struct brcmf_bus *bus;
+	struct brcmf_usbdev *bus_pub;
 	struct device *dev = devinfo->dev;
 	struct brcmf_fw_request *fwreq;
 	int ret;
@@ -1237,7 +1255,7 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo)
 	if (!bus_pub)
 		return -ENODEV;
 
-	bus = kzalloc(sizeof(struct brcmf_bus), GFP_ATOMIC);
+	bus = kzalloc(sizeof(*bus), GFP_ATOMIC);
 	if (!bus) {
 		ret = -ENOMEM;
 		goto fail;
@@ -1249,6 +1267,7 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo)
 	dev_set_drvdata(dev, bus);
 	bus->ops = &brcmf_usb_bus_ops;
 	bus->proto_type = BRCMF_PROTO_BCDC;
+	bus->fwvid = fwvid;
 	bus->always_use_fws_queue = true;
 #ifdef CONFIG_PM
 	bus->wowl_supported = true;
@@ -1261,13 +1280,19 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo)
 		ret = -ENOMEM;
 		goto fail;
 	}
+	ret = PTR_ERR_OR_ZERO(devinfo->settings);
+	if (ret < 0)
+		goto fail;
 
 	if (!brcmf_usb_dlneeded(devinfo)) {
-		ret = brcmf_attach(devinfo->dev, devinfo->settings);
+		ret = brcmf_alloc(devinfo->dev, devinfo->settings);
+		if (ret)
+			goto fail;
+		ret = brcmf_attach(devinfo->dev);
 		if (ret)
 			goto fail;
 		/* we are done */
-		mutex_unlock(&devinfo->dev_init_lock);
+		complete(&devinfo->dev_init_done);
 		return 0;
 	}
 	bus->chip = bus_pub->devid;
@@ -1291,6 +1316,7 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo)
 
 fail:
 	/* Release resources in reverse order */
+	brcmf_free(devinfo->dev);
 	kfree(bus);
 	brcmf_usb_detach(devinfo);
 	return ret;
@@ -1304,10 +1330,14 @@ brcmf_usb_disconnect_cb(struct brcmf_usbdev_info *devinfo)
 	brcmf_dbg(USB, "Enter, bus_pub %p\n", devinfo);
 
 	brcmf_detach(devinfo->dev);
+	brcmf_free(devinfo->dev);
 	kfree(devinfo->bus_pub.bus);
 	brcmf_usb_detach(devinfo);
 }
 
+/* Forward declaration for usb_match_id() call */
+static const struct usb_device_id brcmf_usb_devid_table[];
+
 static int
 brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 {
@@ -1319,6 +1349,14 @@ brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	u32 num_of_eps;
 	u8 endpoint_num, ep;
 
+	if (!id) {
+		id = usb_match_id(intf, brcmf_usb_devid_table);
+		if (!id) {
+			dev_err(&intf->dev, "Error could not find matching usb_device_id\n");
+			return -ENODEV;
+		}
+	}
+
 	brcmf_dbg(USB, "Enter 0x%04x:0x%04x\n", id->idVendor, id->idProduct);
 
 	devinfo = kzalloc(sizeof(*devinfo), GFP_ATOMIC);
@@ -1327,14 +1365,15 @@ brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 
 	devinfo->usbdev = usb;
 	devinfo->dev = &usb->dev;
-	/* Take an init lock, to protect for disconnect while still loading.
+	/* Init completion, to protect for disconnect while still loading.
 	 * Necessary because of the asynchronous firmware load construction
 	 */
-	mutex_init(&devinfo->dev_init_lock);
-	mutex_lock(&devinfo->dev_init_lock);
+	init_completion(&devinfo->dev_init_done);
 
 	usb_set_intfdata(intf, devinfo);
 
+	intf->needs_remote_wakeup = 1;
+
 	/* Check that the device supports only one configuration */
 	if (usb->descriptor.bNumConfigurations != 1) {
 		brcmf_err("Number of configurations: %d not supported\n",
@@ -1352,7 +1391,7 @@ brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 		goto fail;
 	}
 
-	desc = &intf->altsetting[0].desc;
+	desc = &intf->cur_altsetting->desc;
 	if ((desc->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
 	    (desc->bInterfaceSubClass != 2) ||
 	    (desc->bInterfaceProtocol != 0xff)) {
@@ -1365,7 +1404,7 @@ brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 
 	num_of_eps = desc->bNumEndpoints;
 	for (ep = 0; ep < num_of_eps; ep++) {
-		endpoint = &intf->altsetting[0].endpoint[ep].desc;
+		endpoint = &intf->cur_altsetting->endpoint[ep].desc;
 		endpoint_num = usb_endpoint_num(endpoint);
 		if (!usb_endpoint_xfer_bulk(endpoint))
 			continue;
@@ -1401,7 +1440,7 @@ brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	else
 		brcmf_dbg(USB, "Broadcom full speed USB WLAN interface detected\n");
 
-	ret = brcmf_usb_probe_cb(devinfo);
+	ret = brcmf_usb_probe_cb(devinfo, id->driver_info);
 	if (ret)
 		goto fail;
 
@@ -1409,7 +1448,7 @@ brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	return 0;
 
 fail:
-	mutex_unlock(&devinfo->dev_init_lock);
+	complete(&devinfo->dev_init_done);
 	kfree(devinfo);
 	usb_set_intfdata(intf, NULL);
 	return ret;
@@ -1424,7 +1463,7 @@ brcmf_usb_disconnect(struct usb_interface *intf)
 	devinfo = (struct brcmf_usbdev_info *)usb_get_intfdata(intf);
 
 	if (devinfo) {
-		mutex_lock(&devinfo->dev_init_lock);
+		wait_for_completion(&devinfo->dev_init_done);
 		/* Make sure that devinfo still exists. Firmware probe routines
 		 * may have released the device and cleared the intfdata.
 		 */
@@ -1448,10 +1487,8 @@ static int brcmf_usb_suspend(struct usb_interface *intf, pm_message_t state)
 
 	brcmf_dbg(USB, "Enter\n");
 	devinfo->bus_pub.state = BRCMFMAC_USB_STATE_SLEEP;
-	if (devinfo->wowl_enabled)
-		brcmf_cancel_all_urbs(devinfo);
-	else
-		brcmf_detach(&usb->dev);
+	brcmf_cancel_all_urbs(devinfo);
+	device_set_wakeup_enable(devinfo->dev, true);
 	return 0;
 }
 
@@ -1464,11 +1501,10 @@ static int brcmf_usb_resume(struct usb_interface *intf)
 	struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev);
 
 	brcmf_dbg(USB, "Enter\n");
-	if (!devinfo->wowl_enabled)
-		return brcmf_attach(devinfo->dev, devinfo->settings);
 
 	devinfo->bus_pub.state = BRCMFMAC_USB_STATE_UP;
 	brcmf_usb_rx_fill_all(devinfo);
+	device_set_wakeup_enable(devinfo->dev, false);
 	return 0;
 }
 
@@ -1492,14 +1528,23 @@ static int brcmf_usb_reset_resume(struct usb_interface *intf)
 	return ret;
 }
 
-#define BRCMF_USB_DEVICE(dev_id)	\
-	{ USB_DEVICE(BRCM_USB_VENDOR_ID_BROADCOM, dev_id) }
+#define BRCMF_USB_DEVICE(dev_id) \
+	{ \
+		USB_DEVICE(BRCM_USB_VENDOR_ID_BROADCOM, dev_id), \
+		.driver_info = BRCMF_FWVENDOR_WCC \
+	}
 
-#define LINKSYS_USB_DEVICE(dev_id)	\
-	{ USB_DEVICE(BRCM_USB_VENDOR_ID_LINKSYS, dev_id) }
+#define LINKSYS_USB_DEVICE(dev_id) \
+	{ \
+		USB_DEVICE(BRCM_USB_VENDOR_ID_LINKSYS, dev_id), \
+		.driver_info = BRCMF_FWVENDOR_WCC \
+	}
 
-#define CYPRESS_USB_DEVICE(dev_id)	\
-	{ USB_DEVICE(CY_USB_VENDOR_ID_CYPRESS, dev_id) }
+#define CYPRESS_USB_DEVICE(dev_id) \
+	{ \
+		USB_DEVICE(CY_USB_VENDOR_ID_CYPRESS, dev_id), \
+		.driver_info = BRCMF_FWVENDOR_WCC \
+	}
 
 static const struct usb_device_id brcmf_usb_devid_table[] = {
 	BRCMF_USB_DEVICE(BRCM_USB_43143_DEVICE_ID),
@@ -1525,6 +1570,7 @@ static struct usb_driver brcmf_usbdrvr = {
 	.suspend = brcmf_usb_suspend,
 	.resume = brcmf_usb_resume,
 	.reset_resume = brcmf_usb_reset_resume,
+	.supports_autosuspend = true,
 	.disable_hub_initiated_lpm = 1,
 };
 
@@ -1539,17 +1585,20 @@ static int brcmf_usb_reset_device(struct device *dev, void *notused)
 
 void brcmf_usb_exit(void)
 {
-	struct device_driver *drv = &brcmf_usbdrvr.drvwrap.driver;
+	struct device_driver *drv = &brcmf_usbdrvr.driver;
 	int ret;
 
 	brcmf_dbg(USB, "Enter\n");
 	ret = driver_for_each_device(drv, NULL, NULL,
 				     brcmf_usb_reset_device);
+	if (ret)
+		brcmf_err("failed to reset all usb devices %d\n", ret);
+
 	usb_deregister(&brcmf_usbdrvr);
 }
 
-void brcmf_usb_register(void)
+int brcmf_usb_register(void)
 {
 	brcmf_dbg(USB, "Enter\n");
-	usb_register(&brcmf_usbdrvr);
+	return usb_register(&brcmf_usbdrvr);
 }