summaryrefslogtreecommitdiff
path: root/drivers/nvmem/imx-ocotp.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/nvmem/imx-ocotp.c')
-rw-r--r--drivers/nvmem/imx-ocotp.c193
1 files changed, 156 insertions, 37 deletions
diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
index 193ca8fd350a..d7ba351a70c9 100644
--- a/drivers/nvmem/imx-ocotp.c
+++ b/drivers/nvmem/imx-ocotp.c
@@ -40,14 +40,19 @@
#define IMX_OCOTP_ADDR_CTRL_SET 0x0004
#define IMX_OCOTP_ADDR_CTRL_CLR 0x0008
#define IMX_OCOTP_ADDR_TIMING 0x0010
-#define IMX_OCOTP_ADDR_DATA 0x0020
+#define IMX_OCOTP_ADDR_DATA0 0x0020
+#define IMX_OCOTP_ADDR_DATA1 0x0030
+#define IMX_OCOTP_ADDR_DATA2 0x0040
+#define IMX_OCOTP_ADDR_DATA3 0x0050
#define IMX_OCOTP_BM_CTRL_ADDR 0x0000007F
#define IMX_OCOTP_BM_CTRL_BUSY 0x00000100
#define IMX_OCOTP_BM_CTRL_ERROR 0x00000200
#define IMX_OCOTP_BM_CTRL_REL_SHADOWS 0x00000400
-#define DEF_RELAX 20 /* > 16.5ns */
+#define DEF_RELAX 20 /* > 16.5ns */
+#define DEF_FSOURCE 1001 /* > 1000 ns */
+#define DEF_STROBE_PROG 10000 /* IPG clocks */
#define IMX_OCOTP_WR_UNLOCK 0x3E770000
#define IMX_OCOTP_READ_LOCKED_VAL 0xBADABADA
@@ -57,10 +62,16 @@ struct ocotp_priv {
struct device *dev;
struct clk *clk;
void __iomem *base;
- unsigned int nregs;
+ const struct ocotp_params *params;
struct nvmem_config *config;
};
+struct ocotp_params {
+ unsigned int nregs;
+ unsigned int bank_address_words;
+ void (*set_timing)(struct ocotp_priv *priv);
+};
+
static int imx_ocotp_wait_for_busy(void __iomem *base, u32 flags)
{
int count;
@@ -121,8 +132,8 @@ static int imx_ocotp_read(void *context, unsigned int offset,
index = offset >> 2;
count = bytes >> 2;
- if (count > (priv->nregs - index))
- count = priv->nregs - index;
+ if (count > (priv->params->nregs - index))
+ count = priv->params->nregs - index;
mutex_lock(&ocotp_mutex);
@@ -160,6 +171,52 @@ read_end:
return ret;
}
+static void imx_ocotp_set_imx6_timing(struct ocotp_priv *priv)
+{
+ unsigned long clk_rate = 0;
+ unsigned long strobe_read, relax, strobe_prog;
+ u32 timing = 0;
+
+ /* 47.3.1.3.1
+ * Program HW_OCOTP_TIMING[STROBE_PROG] and HW_OCOTP_TIMING[RELAX]
+ * fields with timing values to match the current frequency of the
+ * ipg_clk. OTP writes will work at maximum bus frequencies as long
+ * as the HW_OCOTP_TIMING parameters are set correctly.
+ */
+ clk_rate = clk_get_rate(priv->clk);
+
+ relax = clk_rate / (1000000000 / DEF_RELAX) - 1;
+ strobe_prog = clk_rate / (1000000000 / 10000) + 2 * (DEF_RELAX + 1) - 1;
+ strobe_read = clk_rate / (1000000000 / 40) + 2 * (DEF_RELAX + 1) - 1;
+
+ timing = strobe_prog & 0x00000FFF;
+ timing |= (relax << 12) & 0x0000F000;
+ timing |= (strobe_read << 16) & 0x003F0000;
+
+ writel(timing, priv->base + IMX_OCOTP_ADDR_TIMING);
+}
+
+static void imx_ocotp_set_imx7_timing(struct ocotp_priv *priv)
+{
+ unsigned long clk_rate = 0;
+ u64 fsource, strobe_prog;
+ u32 timing = 0;
+
+ /* i.MX 7Solo Applications Processor Reference Manual, Rev. 0.1
+ * 6.4.3.3
+ */
+ clk_rate = clk_get_rate(priv->clk);
+ fsource = DIV_ROUND_UP_ULL((u64)clk_rate * DEF_FSOURCE,
+ NSEC_PER_SEC) + 1;
+ strobe_prog = DIV_ROUND_CLOSEST_ULL((u64)clk_rate * DEF_STROBE_PROG,
+ NSEC_PER_SEC) + 1;
+
+ timing = strobe_prog & 0x00000FFF;
+ timing |= (fsource << 12) & 0x000FF000;
+
+ writel(timing, priv->base + IMX_OCOTP_ADDR_TIMING);
+}
+
static int imx_ocotp_write(void *context, unsigned int offset, void *val,
size_t bytes)
{
@@ -167,11 +224,9 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val,
u32 *buf = val;
int ret;
- unsigned long clk_rate = 0;
- unsigned long strobe_read, relax, strobe_prog;
- u32 timing = 0;
u32 ctrl;
u8 waddr;
+ u8 word = 0;
/* allow only writing one complete OTP word at a time */
if ((bytes != priv->config->word_size) ||
@@ -187,23 +242,8 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val,
return ret;
}
- /* 47.3.1.3.1
- * Program HW_OCOTP_TIMING[STROBE_PROG] and HW_OCOTP_TIMING[RELAX]
- * fields with timing values to match the current frequency of the
- * ipg_clk. OTP writes will work at maximum bus frequencies as long
- * as the HW_OCOTP_TIMING parameters are set correctly.
- */
- clk_rate = clk_get_rate(priv->clk);
-
- relax = clk_rate / (1000000000 / DEF_RELAX) - 1;
- strobe_prog = clk_rate / (1000000000 / 10000) + 2 * (DEF_RELAX + 1) - 1;
- strobe_read = clk_rate / (1000000000 / 40) + 2 * (DEF_RELAX + 1) - 1;
-
- timing = strobe_prog & 0x00000FFF;
- timing |= (relax << 12) & 0x0000F000;
- timing |= (strobe_read << 16) & 0x003F0000;
-
- writel(timing, priv->base + IMX_OCOTP_ADDR_TIMING);
+ /* Setup the write timing values */
+ priv->params->set_timing(priv);
/* 47.3.1.3.2
* Check that HW_OCOTP_CTRL[BUSY] and HW_OCOTP_CTRL[ERROR] are clear.
@@ -224,8 +264,23 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val,
* description. Both the unlock code and address can be written in the
* same operation.
*/
- /* OTP write/read address specifies one of 128 word address locations */
- waddr = offset / 4;
+ if (priv->params->bank_address_words != 0) {
+ /*
+ * In banked/i.MX7 mode the OTP register bank goes into waddr
+ * see i.MX 7Solo Applications Processor Reference Manual, Rev.
+ * 0.1 section 6.4.3.1
+ */
+ offset = offset / priv->config->word_size;
+ waddr = offset / priv->params->bank_address_words;
+ word = offset & (priv->params->bank_address_words - 1);
+ } else {
+ /*
+ * Non-banked i.MX6 mode.
+ * OTP write/read address specifies one of 128 word address
+ * locations
+ */
+ waddr = offset / 4;
+ }
ctrl = readl(priv->base + IMX_OCOTP_ADDR_CTRL);
ctrl &= ~IMX_OCOTP_BM_CTRL_ADDR;
@@ -251,8 +306,43 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val,
* shift right (with zero fill). This shifting is required to program
* the OTP serially. During the write operation, HW_OCOTP_DATA cannot be
* modified.
+ * Note: on i.MX7 there are four data fields to write for banked write
+ * with the fuse blowing operation only taking place after data0
+ * has been written. This is why data0 must always be the last
+ * register written.
*/
- writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA);
+ if (priv->params->bank_address_words != 0) {
+ /* Banked/i.MX7 mode */
+ switch (word) {
+ case 0:
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA1);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA2);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA3);
+ writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA0);
+ break;
+ case 1:
+ writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA1);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA2);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA3);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA0);
+ break;
+ case 2:
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA1);
+ writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA2);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA3);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA0);
+ break;
+ case 3:
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA1);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA2);
+ writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA3);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA0);
+ break;
+ }
+ } else {
+ /* Non-banked i.MX6 mode */
+ writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA0);
+ }
/* 47.4.1.4.5
* Once complete, the controller will clear BUSY. A write request to a
@@ -303,17 +393,46 @@ static struct nvmem_config imx_ocotp_nvmem_config = {
.read_only = false,
.word_size = 4,
.stride = 4,
- .owner = THIS_MODULE,
.reg_read = imx_ocotp_read,
.reg_write = imx_ocotp_write,
};
+static const struct ocotp_params imx6q_params = {
+ .nregs = 128,
+ .bank_address_words = 0,
+ .set_timing = imx_ocotp_set_imx6_timing,
+};
+
+static const struct ocotp_params imx6sl_params = {
+ .nregs = 64,
+ .bank_address_words = 0,
+ .set_timing = imx_ocotp_set_imx6_timing,
+};
+
+static const struct ocotp_params imx6sx_params = {
+ .nregs = 128,
+ .bank_address_words = 0,
+ .set_timing = imx_ocotp_set_imx6_timing,
+};
+
+static const struct ocotp_params imx6ul_params = {
+ .nregs = 128,
+ .bank_address_words = 0,
+ .set_timing = imx_ocotp_set_imx6_timing,
+};
+
+static const struct ocotp_params imx7d_params = {
+ .nregs = 64,
+ .bank_address_words = 4,
+ .set_timing = imx_ocotp_set_imx7_timing,
+};
+
static const struct of_device_id imx_ocotp_dt_ids[] = {
- { .compatible = "fsl,imx6q-ocotp", (void *)128 },
- { .compatible = "fsl,imx6sl-ocotp", (void *)64 },
- { .compatible = "fsl,imx6sx-ocotp", (void *)128 },
- { .compatible = "fsl,imx6ul-ocotp", (void *)128 },
- { .compatible = "fsl,imx7d-ocotp", (void *)64 },
+ { .compatible = "fsl,imx6q-ocotp", .data = &imx6q_params },
+ { .compatible = "fsl,imx6sl-ocotp", .data = &imx6sl_params },
+ { .compatible = "fsl,imx6sx-ocotp", .data = &imx6sx_params },
+ { .compatible = "fsl,imx6ul-ocotp", .data = &imx6ul_params },
+ { .compatible = "fsl,imx7d-ocotp", .data = &imx7d_params },
{ },
};
MODULE_DEVICE_TABLE(of, imx_ocotp_dt_ids);
@@ -342,8 +461,8 @@ static int imx_ocotp_probe(struct platform_device *pdev)
return PTR_ERR(priv->clk);
of_id = of_match_device(imx_ocotp_dt_ids, dev);
- priv->nregs = (unsigned long)of_id->data;
- imx_ocotp_nvmem_config.size = 4 * priv->nregs;
+ priv->params = of_device_get_match_data(&pdev->dev);
+ imx_ocotp_nvmem_config.size = 4 * priv->params->nregs;
imx_ocotp_nvmem_config.dev = dev;
imx_ocotp_nvmem_config.priv = priv;
priv->config = &imx_ocotp_nvmem_config;
@@ -375,5 +494,5 @@ static struct platform_driver imx_ocotp_driver = {
module_platform_driver(imx_ocotp_driver);
MODULE_AUTHOR("Philipp Zabel <p.zabel@pengutronix.de>");
-MODULE_DESCRIPTION("i.MX6 OCOTP fuse box driver");
+MODULE_DESCRIPTION("i.MX6/i.MX7 OCOTP fuse box driver");
MODULE_LICENSE("GPL v2");