diff options
Diffstat (limited to 'drivers/pci/controller/dwc/Kconfig')
| -rw-r--r-- | drivers/pci/controller/dwc/Kconfig | 151 |
1 files changed, 142 insertions, 9 deletions
diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig index ab96da43e0c2..519b59422b47 100644 --- a/drivers/pci/controller/dwc/Kconfig +++ b/drivers/pci/controller/dwc/Kconfig @@ -6,9 +6,21 @@ menu "DesignWare-based PCIe controllers" config PCIE_DW bool +config PCIE_DW_DEBUGFS + bool "DesignWare PCIe debugfs entries" + depends on DEBUG_FS + depends on PCIE_DW_HOST || PCIE_DW_EP + help + Say Y here to enable debugfs entries for the PCIe controller. These + entries provide various debug features related to the controller and + expose the RAS DES capabilities such as Silicon Debug, Error Injection + and Statistical Counters. + config PCIE_DW_HOST bool select PCIE_DW + select IRQ_MSI_LIB + select PCI_HOST_COMMON config PCIE_DW_EP bool @@ -27,6 +39,17 @@ config PCIE_AL required only for DT-based platforms. ACPI platforms with the Annapurna Labs PCIe controller don't need to enable this. +config PCIE_AMD_MDB + bool "AMD MDB Versal2 PCIe controller" + depends on OF && (ARM64 || COMPILE_TEST) + depends on PCI_MSI + select PCIE_DW_HOST + help + Say Y here if you want to enable PCIe controller support on AMD + Versal2 SoCs. The AMD MDB Versal2 PCIe controller is based on + DesignWare IP and therefore the driver re-uses the DesignWare + core functions to implement the driver. + config PCI_MESON tristate "Amlogic Meson PCIe controller" default m if ARCH_MESON @@ -233,6 +256,16 @@ config PCIE_TEGRA194_EP in order to enable device-specific features PCIE_TEGRA194_EP must be selected. This uses the DesignWare core. +config PCIE_NXP_S32G + bool "NXP S32G PCIe controller (host mode)" + depends on ARCH_S32 || COMPILE_TEST + select PCIE_DW_HOST + help + Enable support for the PCIe controller in NXP S32G based boards to + work in Host mode. The controller is based on DesignWare IP and + can work either as RC or EP. In order to enable host-specific + features PCIE_NXP_S32G must be selected. + config PCIE_DW_PLAT bool @@ -265,12 +298,18 @@ config PCIE_DW_PLAT_EP order to enable device-specific features PCI_DW_PLAT_EP must be selected. +config PCIE_QCOM_COMMON + bool + config PCIE_QCOM bool "Qualcomm PCIe controller (host mode)" depends on OF && (ARCH_QCOM || COMPILE_TEST) depends on PCI_MSI select PCIE_DW_HOST select CRC8 + select PCIE_QCOM_COMMON + select PCI_HOST_COMMON + select PCI_PWRCTRL_SLOT help Say Y here to enable PCIe controller support on Qualcomm SoCs. The PCIe controller uses the DesignWare core plus Qualcomm-specific @@ -281,21 +320,61 @@ config PCIE_QCOM_EP depends on OF && (ARCH_QCOM || COMPILE_TEST) depends on PCI_ENDPOINT select PCIE_DW_EP + select PCIE_QCOM_COMMON help Say Y here to enable support for the PCIe controllers on Qualcomm SoCs to work in endpoint mode. The PCIe controller uses the DesignWare core plus Qualcomm-specific hardware wrappers. -config PCIE_ROCKCHIP_DW_HOST - bool "Rockchip DesignWare PCIe controller" - select PCIE_DW +config PCIE_RCAR_GEN4 + tristate + +config PCIE_RCAR_GEN4_HOST + tristate "Renesas R-Car Gen4 PCIe controller (host mode)" + depends on ARCH_RENESAS || COMPILE_TEST + depends on PCI_MSI select PCIE_DW_HOST + select PCIE_RCAR_GEN4 + help + Say Y here if you want PCIe controller (host mode) on R-Car Gen4 SoCs. + To compile this driver as a module, choose M here: the module will be + called pcie-rcar-gen4.ko. This uses the DesignWare core. + +config PCIE_RCAR_GEN4_EP + tristate "Renesas R-Car Gen4 PCIe controller (endpoint mode)" + depends on ARCH_RENESAS || COMPILE_TEST + depends on PCI_ENDPOINT + select PCIE_DW_EP + select PCIE_RCAR_GEN4 + help + Say Y here if you want PCIe controller (endpoint mode) on R-Car Gen4 + SoCs. To compile this driver as a module, choose M here: the module + will be called pcie-rcar-gen4.ko. This uses the DesignWare core. + +config PCIE_ROCKCHIP_DW + bool + +config PCIE_ROCKCHIP_DW_HOST + bool "Rockchip DesignWare PCIe controller (host mode)" depends on PCI_MSI depends on ARCH_ROCKCHIP || COMPILE_TEST depends on OF + select PCIE_DW_HOST + select PCIE_ROCKCHIP_DW + help + Enables support for the DesignWare PCIe controller in the + Rockchip SoC (except RK3399) to work in host mode. + +config PCIE_ROCKCHIP_DW_EP + bool "Rockchip DesignWare PCIe controller (endpoint mode)" + depends on ARCH_ROCKCHIP || COMPILE_TEST + depends on OF + depends on PCI_ENDPOINT + select PCIE_DW_EP + select PCIE_ROCKCHIP_DW help Enables support for the DesignWare PCIe controller in the - Rockchip SoC except RK3399. + Rockchip SoC (except RK3399) to work in endpoint mode. config PCI_EXYNOS tristate "Samsung Exynos PCIe controller" @@ -311,7 +390,7 @@ config PCI_EXYNOS config PCIE_FU740 bool "SiFive FU740 PCIe controller" depends on PCI_MSI - depends on SOC_SIFIVE || COMPILE_TEST + depends on ARCH_SIFIVE || COMPILE_TEST select PCIE_DW_HOST help Say Y here if you want PCIe controller support for the SiFive @@ -337,6 +416,29 @@ config PCIE_UNIPHIER_EP Say Y here if you want PCIe endpoint controller support on UniPhier SoCs. This driver supports Pro5 SoC. +config PCIE_SOPHGO_DW + bool "Sophgo DesignWare PCIe controller (host mode)" + depends on ARCH_SOPHGO || COMPILE_TEST + depends on PCI_MSI + depends on OF + select PCIE_DW_HOST + help + Say Y here if you want PCIe host controller support on + Sophgo SoCs. + +config PCIE_SPACEMIT_K1 + tristate "SpacemiT K1 PCIe controller (host mode)" + depends on ARCH_SPACEMIT || COMPILE_TEST + depends on HAS_IOMEM + select PCIE_DW_HOST + select PCI_PWRCTRL_SLOT + default ARCH_SPACEMIT + help + Enables support for the DesignWare based PCIe controller in + the SpacemiT K1 SoC operating in host mode. Three controllers + are available on the K1 SoC; the first of these shares a PHY + with a USB 3.0 host controller (one or the other can be used). + config PCIE_SPEAR13XX bool "STMicroelectronics SPEAr PCIe controller" depends on ARCH_SPEAR13XX || COMPILE_TEST @@ -345,6 +447,30 @@ config PCIE_SPEAR13XX help Say Y here if you want PCIe support on SPEAr13XX SoCs. +config PCIE_STM32_HOST + tristate "STMicroelectronics STM32MP25 PCIe Controller (host mode)" + depends on ARCH_STM32 || COMPILE_TEST + depends on PCI_MSI + select PCIE_DW_HOST + help + Enables Root Complex (RC) support for the DesignWare core based PCIe + controller found in STM32MP25 SoC. + + This driver can also be built as a module. If so, the module + will be called pcie-stm32. + +config PCIE_STM32_EP + tristate "STMicroelectronics STM32MP25 PCIe Controller (endpoint mode)" + depends on ARCH_STM32 || COMPILE_TEST + depends on PCI_ENDPOINT + select PCIE_DW_EP + help + Enables Endpoint (EP) support for the DesignWare core based PCIe + controller found in STM32MP25 SoC. + + This driver can also be built as a module. If so, the module + will be called pcie-stm32-ep. + config PCI_DRA7XX tristate @@ -379,15 +505,21 @@ config PCI_DRA7XX_EP to enable device-specific features PCI_DRA7XX_EP must be selected. This uses the DesignWare core. +# ARM32 platforms use hook_fault_code() and cannot support loadable module. config PCI_KEYSTONE bool +# On non-ARM32 platforms, loadable module can be supported. +config PCI_KEYSTONE_TRISTATE + tristate + config PCI_KEYSTONE_HOST - bool "TI Keystone PCIe controller (host mode)" + tristate "TI Keystone PCIe controller (host mode)" depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST depends on PCI_MSI select PCIE_DW_HOST - select PCI_KEYSTONE + select PCI_KEYSTONE if ARM + select PCI_KEYSTONE_TRISTATE if !ARM help Enables support for the PCIe controller in the Keystone SoC to work in host mode. The PCI controller on Keystone is based on @@ -395,11 +527,12 @@ config PCI_KEYSTONE_HOST DesignWare core functions to implement the driver. config PCI_KEYSTONE_EP - bool "TI Keystone PCIe controller (endpoint mode)" + tristate "TI Keystone PCIe controller (endpoint mode)" depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST depends on PCI_ENDPOINT select PCIE_DW_EP - select PCI_KEYSTONE + select PCI_KEYSTONE if ARM + select PCI_KEYSTONE_TRISTATE if !ARM help Enables support for the PCIe controller in the Keystone SoC to work in endpoint mode. The PCI controller on Keystone is based |