diff options
Diffstat (limited to 'drivers/pci/controller/dwc/pci-keystone.c')
| -rw-r--r-- | drivers/pci/controller/dwc/pci-keystone.c | 232 |
1 files changed, 142 insertions, 90 deletions
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c index 844de4418724..63bd5003da45 100644 --- a/drivers/pci/controller/dwc/pci-keystone.c +++ b/drivers/pci/controller/dwc/pci-keystone.c @@ -34,6 +34,11 @@ #define PCIE_DEVICEID_SHIFT 16 /* Application registers */ +#define PID 0x000 +#define RTL GENMASK(15, 11) +#define RTL_SHIFT 11 +#define AM6_PCI_PG1_RTL_VER 0x15 + #define CMD_STATUS 0x004 #define LTSSM_EN_VAL BIT(0) #define OB_XLAT_EN_VAL BIT(1) @@ -104,6 +109,8 @@ #define to_keystone_pcie(x) dev_get_drvdata((x)->dev) +#define PCI_DEVICE_ID_TI_AM654X 0xb00c + struct ks_pcie_of_data { enum dw_pcie_device_mode mode; const struct dw_pcie_host_ops *host_ops; @@ -182,12 +189,6 @@ static void ks_pcie_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) (int)data->hwirq, msg->address_hi, msg->address_lo); } -static int ks_pcie_msi_set_affinity(struct irq_data *irq_data, - const struct cpumask *mask, bool force) -{ - return -EINVAL; -} - static void ks_pcie_msi_mask(struct irq_data *data) { struct dw_pcie_rp *pp = irq_data_get_irq_chip_data(data); @@ -240,13 +241,72 @@ static struct irq_chip ks_pcie_msi_irq_chip = { .name = "KEYSTONE-PCI-MSI", .irq_ack = ks_pcie_msi_irq_ack, .irq_compose_msi_msg = ks_pcie_compose_msi_msg, - .irq_set_affinity = ks_pcie_msi_set_affinity, .irq_mask = ks_pcie_msi_mask, .irq_unmask = ks_pcie_msi_unmask, }; +/** + * ks_pcie_set_dbi_mode() - Set DBI mode to access overlaid BAR mask registers + * @ks_pcie: A pointer to the keystone_pcie structure which holds the KeyStone + * PCIe host controller driver information. + * + * Since modification of dbi_cs2 involves different clock domain, read the + * status back to ensure the transition is complete. + */ +static void ks_pcie_set_dbi_mode(struct keystone_pcie *ks_pcie) +{ + u32 val; + + val = ks_pcie_app_readl(ks_pcie, CMD_STATUS); + val |= DBI_CS2; + ks_pcie_app_writel(ks_pcie, CMD_STATUS, val); + + do { + val = ks_pcie_app_readl(ks_pcie, CMD_STATUS); + } while (!(val & DBI_CS2)); +} + +/** + * ks_pcie_clear_dbi_mode() - Disable DBI mode + * @ks_pcie: A pointer to the keystone_pcie structure which holds the KeyStone + * PCIe host controller driver information. + * + * Since modification of dbi_cs2 involves different clock domain, read the + * status back to ensure the transition is complete. + */ +static void ks_pcie_clear_dbi_mode(struct keystone_pcie *ks_pcie) +{ + u32 val; + + val = ks_pcie_app_readl(ks_pcie, CMD_STATUS); + val &= ~DBI_CS2; + ks_pcie_app_writel(ks_pcie, CMD_STATUS, val); + + do { + val = ks_pcie_app_readl(ks_pcie, CMD_STATUS); + } while (val & DBI_CS2); +} + static int ks_pcie_msi_host_init(struct dw_pcie_rp *pp) { + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); + + /* Configure and set up BAR0 */ + ks_pcie_set_dbi_mode(ks_pcie); + + /* Enable BAR0 */ + dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 1); + dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, SZ_4K - 1); + + ks_pcie_clear_dbi_mode(ks_pcie); + + /* + * For BAR0, just setting bus address for inbound writes (MSI) should + * be sufficient. Use physical address to avoid any conflicts. + */ + dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, ks_pcie->app.start); + pp->msi_irq_chip = &ks_pcie_msi_irq_chip; return dw_pcie_allocate_domains(pp); } @@ -340,59 +400,22 @@ static const struct irq_domain_ops ks_pcie_intx_irq_domain_ops = { .xlate = irq_domain_xlate_onetwocell, }; -/** - * ks_pcie_set_dbi_mode() - Set DBI mode to access overlaid BAR mask registers - * @ks_pcie: A pointer to the keystone_pcie structure which holds the KeyStone - * PCIe host controller driver information. - * - * Since modification of dbi_cs2 involves different clock domain, read the - * status back to ensure the transition is complete. - */ -static void ks_pcie_set_dbi_mode(struct keystone_pcie *ks_pcie) -{ - u32 val; - - val = ks_pcie_app_readl(ks_pcie, CMD_STATUS); - val |= DBI_CS2; - ks_pcie_app_writel(ks_pcie, CMD_STATUS, val); - - do { - val = ks_pcie_app_readl(ks_pcie, CMD_STATUS); - } while (!(val & DBI_CS2)); -} - -/** - * ks_pcie_clear_dbi_mode() - Disable DBI mode - * @ks_pcie: A pointer to the keystone_pcie structure which holds the KeyStone - * PCIe host controller driver information. - * - * Since modification of dbi_cs2 involves different clock domain, read the - * status back to ensure the transition is complete. - */ -static void ks_pcie_clear_dbi_mode(struct keystone_pcie *ks_pcie) -{ - u32 val; - - val = ks_pcie_app_readl(ks_pcie, CMD_STATUS); - val &= ~DBI_CS2; - ks_pcie_app_writel(ks_pcie, CMD_STATUS, val); - - do { - val = ks_pcie_app_readl(ks_pcie, CMD_STATUS); - } while (val & DBI_CS2); -} - -static void ks_pcie_setup_rc_app_regs(struct keystone_pcie *ks_pcie) +static int ks_pcie_setup_rc_app_regs(struct keystone_pcie *ks_pcie) { u32 val; u32 num_viewport = ks_pcie->num_viewport; struct dw_pcie *pci = ks_pcie->pci; struct dw_pcie_rp *pp = &pci->pp; - u64 start, end; + struct resource_entry *entry; struct resource *mem; + u64 start, end; int i; - mem = resource_list_first_type(&pp->bridge->windows, IORESOURCE_MEM)->res; + entry = resource_list_first_type(&pp->bridge->windows, IORESOURCE_MEM); + if (!entry) + return -ENODEV; + + mem = entry->res; start = mem->start; end = mem->end; @@ -403,7 +426,7 @@ static void ks_pcie_setup_rc_app_regs(struct keystone_pcie *ks_pcie) ks_pcie_clear_dbi_mode(ks_pcie); if (ks_pcie->is_am6) - return; + return 0; val = ilog2(OB_WIN_SIZE); ks_pcie_app_writel(ks_pcie, OB_SIZE, val); @@ -420,6 +443,8 @@ static void ks_pcie_setup_rc_app_regs(struct keystone_pcie *ks_pcie) val = ks_pcie_app_readl(ks_pcie, CMD_STATUS); val |= OB_XLAT_EN_VAL; ks_pcie_app_writel(ks_pcie, CMD_STATUS, val); + + return 0; } static void __iomem *ks_pcie_other_map_bus(struct pci_bus *bus, @@ -430,6 +455,17 @@ static void __iomem *ks_pcie_other_map_bus(struct pci_bus *bus, struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); u32 reg; + /* + * Checking whether the link is up here is a last line of defense + * against platforms that forward errors on the system bus as + * SError upon PCI configuration transactions issued when the link + * is down. This check is racy by definition and does not stop + * the system from triggering an SError if the link goes down + * after this check is performed. + */ + if (!dw_pcie_link_up(pci)) + return NULL; + reg = CFG_BUS(bus->number) | CFG_DEVICE(PCI_SLOT(devfn)) | CFG_FUNC(PCI_FUNC(devfn)); if (!pci_is_root_bus(bus->parent)) @@ -445,44 +481,10 @@ static struct pci_ops ks_child_pcie_ops = { .write = pci_generic_config_write, }; -/** - * ks_pcie_v3_65_add_bus() - keystone add_bus post initialization - * @bus: A pointer to the PCI bus structure. - * - * This sets BAR0 to enable inbound access for MSI_IRQ register - */ -static int ks_pcie_v3_65_add_bus(struct pci_bus *bus) -{ - struct dw_pcie_rp *pp = bus->sysdata; - struct dw_pcie *pci = to_dw_pcie_from_pp(pp); - struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); - - if (!pci_is_root_bus(bus)) - return 0; - - /* Configure and set up BAR0 */ - ks_pcie_set_dbi_mode(ks_pcie); - - /* Enable BAR0 */ - dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 1); - dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, SZ_4K - 1); - - ks_pcie_clear_dbi_mode(ks_pcie); - - /* - * For BAR0, just setting bus address for inbound writes (MSI) should - * be sufficient. Use physical address to avoid any conflicts. - */ - dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, ks_pcie->app.start); - - return 0; -} - static struct pci_ops ks_pcie_ops = { .map_bus = dw_pcie_own_conf_map_bus, .read = pci_generic_config_read, .write = pci_generic_config_write, - .add_bus = ks_pcie_v3_65_add_bus, }; /** @@ -525,7 +527,11 @@ static int ks_pcie_start_link(struct dw_pcie *pci) static void ks_pcie_quirk(struct pci_dev *dev) { struct pci_bus *bus = dev->bus; + struct keystone_pcie *ks_pcie; + struct device *bridge_dev; struct pci_dev *bridge; + u32 val; + static const struct pci_device_id rc_pci_devids[] = { { PCI_DEVICE(PCI_VENDOR_ID_TI, PCIE_RC_K2HK), .class = PCI_CLASS_BRIDGE_PCI_NORMAL, .class_mask = ~0, }, @@ -537,6 +543,11 @@ static void ks_pcie_quirk(struct pci_dev *dev) .class = PCI_CLASS_BRIDGE_PCI_NORMAL, .class_mask = ~0, }, { 0, }, }; + static const struct pci_device_id am6_pci_devids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_AM654X), + .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, }, + { 0, }, + }; if (pci_is_root_bus(bus)) bridge = dev; @@ -558,10 +569,36 @@ static void ks_pcie_quirk(struct pci_dev *dev) */ if (pci_match_id(rc_pci_devids, bridge)) { if (pcie_get_readrq(dev) > 256) { - dev_info(&dev->dev, "limiting MRRS to 256\n"); + dev_info(&dev->dev, "limiting MRRS to 256 bytes\n"); pcie_set_readrq(dev, 256); } } + + /* + * Memory transactions fail with PCI controller in AM654 PG1.0 + * when MRRS is set to more than 128 bytes. Force the MRRS to + * 128 bytes in all downstream devices. + */ + if (pci_match_id(am6_pci_devids, bridge)) { + bridge_dev = pci_get_host_bridge_device(dev); + if (!bridge_dev || !bridge_dev->parent) + return; + + ks_pcie = dev_get_drvdata(bridge_dev->parent); + if (!ks_pcie) + return; + + val = ks_pcie_app_readl(ks_pcie, PID); + val &= RTL; + val >>= RTL_SHIFT; + if (val != AM6_PCI_PG1_RTL_VER) + return; + + if (pcie_get_readrq(dev) > 128) { + dev_info(&dev->dev, "limiting MRRS to 128 bytes\n"); + pcie_set_readrq(dev, 128); + } + } } DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, ks_pcie_quirk); @@ -814,7 +851,10 @@ static int __init ks_pcie_host_init(struct dw_pcie_rp *pp) return ret; ks_pcie_stop_link(pci); - ks_pcie_setup_rc_app_regs(ks_pcie); + ret = ks_pcie_setup_rc_app_regs(ks_pcie); + if (ret) + return ret; + writew(PCI_IO_RANGE_TYPE_32 | (PCI_IO_RANGE_TYPE_32 << 8), pci->dbi_base + PCI_IO_BASE); @@ -1064,6 +1104,7 @@ static int ks_pcie_am654_set_mode(struct device *dev, static const struct ks_pcie_of_data ks_pcie_rc_of_data = { .host_ops = &ks_pcie_host_ops, + .mode = DW_PCIE_RC_TYPE, .version = DW_PCIE_VER_365A, }; @@ -1286,6 +1327,15 @@ static int ks_pcie_probe(struct platform_device *pdev) ret = dw_pcie_ep_init(&pci->ep); if (ret < 0) goto err_get_sync; + + ret = dw_pcie_ep_init_registers(&pci->ep); + if (ret) { + dev_err(dev, "Failed to initialize DWC endpoint registers\n"); + goto err_ep_init; + } + + pci_epc_init_notify(pci->ep.epc); + break; default: dev_err(dev, "INVALID device type %d\n", mode); @@ -1295,6 +1345,8 @@ static int ks_pcie_probe(struct platform_device *pdev) return 0; +err_ep_init: + dw_pcie_ep_deinit(&pci->ep); err_get_sync: pm_runtime_put(dev); pm_runtime_disable(dev); @@ -1323,7 +1375,7 @@ static void ks_pcie_remove(struct platform_device *pdev) static struct platform_driver ks_pcie_driver = { .probe = ks_pcie_probe, - .remove_new = ks_pcie_remove, + .remove = ks_pcie_remove, .driver = { .name = "keystone-pcie", .of_match_table = ks_pcie_of_match, |