diff options
Diffstat (limited to 'drivers/pci/controller/pci-loongson.c')
| -rw-r--r-- | drivers/pci/controller/pci-loongson.c | 94 |
1 files changed, 72 insertions, 22 deletions
diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c index 05c50408f13b..bc630ab8a283 100644 --- a/drivers/pci/controller/pci-loongson.c +++ b/drivers/pci/controller/pci-loongson.c @@ -5,7 +5,7 @@ * Copyright (C) 2020 Jiaxun Yang <jiaxun.yang@flygoat.com> */ -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/of_pci.h> #include <linux/pci.h> #include <linux/pci_ids.h> @@ -15,9 +15,14 @@ #include "../pci.h" /* Device IDs */ -#define DEV_PCIE_PORT_0 0x7a09 -#define DEV_PCIE_PORT_1 0x7a19 -#define DEV_PCIE_PORT_2 0x7a29 +#define DEV_LS2K_PCIE_PORT0 0x1a05 +#define DEV_LS7A_PCIE_PORT0 0x7a09 +#define DEV_LS7A_PCIE_PORT1 0x7a19 +#define DEV_LS7A_PCIE_PORT2 0x7a29 +#define DEV_LS7A_PCIE_PORT3 0x7a39 +#define DEV_LS7A_PCIE_PORT4 0x7a49 +#define DEV_LS7A_PCIE_PORT5 0x7a59 +#define DEV_LS7A_PCIE_PORT6 0x7a69 #define DEV_LS2K_APB 0x7a02 #define DEV_LS7A_GMAC 0x7a03 @@ -53,11 +58,11 @@ static void bridge_class_quirk(struct pci_dev *dev) dev->class = PCI_CLASS_BRIDGE_PCI_NORMAL; } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, - DEV_PCIE_PORT_0, bridge_class_quirk); + DEV_LS7A_PCIE_PORT0, bridge_class_quirk); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, - DEV_PCIE_PORT_1, bridge_class_quirk); + DEV_LS7A_PCIE_PORT1, bridge_class_quirk); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, - DEV_PCIE_PORT_2, bridge_class_quirk); + DEV_LS7A_PCIE_PORT2, bridge_class_quirk); static void system_bus_quirk(struct pci_dev *pdev) { @@ -75,14 +80,27 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, DEV_LS7A_LPC, system_bus_quirk); -static void loongson_mrrs_quirk(struct pci_dev *dev) +/* + * Some Loongson PCIe ports have hardware limitations on their Maximum Read + * Request Size. They can't handle anything larger than this. Sane + * firmware will set proper MRRS at boot, so we only need no_inc_mrrs for + * bridges. However, some MIPS Loongson firmware doesn't set MRRS properly, + * so we have to enforce maximum safe MRRS, which is 256 bytes. + */ +#ifdef CONFIG_MIPS +static void loongson_set_min_mrrs_quirk(struct pci_dev *pdev) { - struct pci_bus *bus = dev->bus; + struct pci_bus *bus = pdev->bus; struct pci_dev *bridge; static const struct pci_device_id bridge_devids[] = { - { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_0) }, - { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_1) }, - { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_2) }, + { PCI_VDEVICE(LOONGSON, DEV_LS2K_PCIE_PORT0) }, + { PCI_VDEVICE(LOONGSON, DEV_LS7A_PCIE_PORT0) }, + { PCI_VDEVICE(LOONGSON, DEV_LS7A_PCIE_PORT1) }, + { PCI_VDEVICE(LOONGSON, DEV_LS7A_PCIE_PORT2) }, + { PCI_VDEVICE(LOONGSON, DEV_LS7A_PCIE_PORT3) }, + { PCI_VDEVICE(LOONGSON, DEV_LS7A_PCIE_PORT4) }, + { PCI_VDEVICE(LOONGSON, DEV_LS7A_PCIE_PORT5) }, + { PCI_VDEVICE(LOONGSON, DEV_LS7A_PCIE_PORT6) }, { 0, }, }; @@ -90,22 +108,41 @@ static void loongson_mrrs_quirk(struct pci_dev *dev) while (!pci_is_root_bus(bus)) { bridge = bus->self; bus = bus->parent; - /* - * Some Loongson PCIe ports have a h/w limitation of - * 256 bytes maximum read request size. They can't handle - * anything larger than this. So force this limit on - * any devices attached under these ports. - */ + if (pci_match_id(bridge_devids, bridge)) { - if (pcie_get_readrq(dev) > 256) { - pci_info(dev, "limiting MRRS to 256\n"); - pcie_set_readrq(dev, 256); + if (pcie_get_readrq(pdev) > 256) { + pci_info(pdev, "limiting MRRS to 256\n"); + pcie_set_readrq(pdev, 256); } break; } } } -DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_set_min_mrrs_quirk); +#endif + +static void loongson_mrrs_quirk(struct pci_dev *pdev) +{ + struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus); + + bridge->no_inc_mrrs = 1; +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS2K_PCIE_PORT0, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_PCIE_PORT0, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_PCIE_PORT1, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_PCIE_PORT2, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_PCIE_PORT3, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_PCIE_PORT4, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_PCIE_PORT5, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_PCIE_PORT6, loongson_mrrs_quirk); static void loongson_pci_pin_quirk(struct pci_dev *pdev) { @@ -126,6 +163,19 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, DEV_LS7A_HDMI, loongson_pci_pin_quirk); +static void loongson_pci_msi_quirk(struct pci_dev *dev) +{ + u16 val, class = dev->class >> 8; + + if (class != PCI_CLASS_BRIDGE_HOST) + return; + + pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &val); + val |= PCI_MSI_FLAGS_ENABLE; + pci_write_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, val); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, DEV_LS7A_PCIE_PORT5, loongson_pci_msi_quirk); + static struct loongson_pci *pci_bus_to_loongson_pci(struct pci_bus *bus) { struct pci_config_window *cfg; |