summaryrefslogtreecommitdiff
path: root/drivers/pci/host/pci-thunder-pem.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/host/pci-thunder-pem.c')
-rw-r--r--drivers/pci/host/pci-thunder-pem.c346
1 files changed, 346 insertions, 0 deletions
diff --git a/drivers/pci/host/pci-thunder-pem.c b/drivers/pci/host/pci-thunder-pem.c
new file mode 100644
index 000000000000..cabb92a514ac
--- /dev/null
+++ b/drivers/pci/host/pci-thunder-pem.c
@@ -0,0 +1,346 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Copyright (C) 2015 - 2016 Cavium, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/platform_device.h>
+
+#include "pci-host-common.h"
+
+#define PEM_CFG_WR 0x28
+#define PEM_CFG_RD 0x30
+
+struct thunder_pem_pci {
+ struct gen_pci gen_pci;
+ u32 ea_entry[3];
+ void __iomem *pem_reg_base;
+};
+
+static void __iomem *thunder_pem_map_bus(struct pci_bus *bus,
+ unsigned int devfn, int where)
+{
+ struct gen_pci *pci = bus->sysdata;
+ resource_size_t idx = bus->number - pci->cfg.bus_range->start;
+
+ return pci->cfg.win[idx] + ((devfn << 16) | where);
+}
+
+static int thunder_pem_bridge_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ u64 read_val;
+ struct thunder_pem_pci *pem_pci;
+ struct gen_pci *pci = bus->sysdata;
+
+ pem_pci = container_of(pci, struct thunder_pem_pci, gen_pci);
+
+ if (devfn != 0 || where >= 2048) {
+ *val = ~0;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ /*
+ * 32-bit accesses only. Write the address to the low order
+ * bits of PEM_CFG_RD, then trigger the read by reading back.
+ * The config data lands in the upper 32-bits of PEM_CFG_RD.
+ */
+ read_val = where & ~3ull;
+ writeq(read_val, pem_pci->pem_reg_base + PEM_CFG_RD);
+ read_val = readq(pem_pci->pem_reg_base + PEM_CFG_RD);
+ read_val >>= 32;
+
+ /*
+ * The config space contains some garbage, fix it up. Also
+ * synthesize an EA capability for the BAR used by MSI-X.
+ */
+ switch (where & ~3) {
+ case 0x40:
+ read_val &= 0xffff00ff;
+ read_val |= 0x00007000; /* Skip MSI CAP */
+ break;
+ case 0x70: /* Express Cap */
+ /* PME interrupt on vector 2*/
+ read_val |= (2u << 25);
+ break;
+ case 0xb0: /* MSI-X Cap */
+ /* TableSize=4, Next Cap is EA */
+ read_val &= 0xc00000ff;
+ read_val |= 0x0003bc00;
+ break;
+ case 0xb4:
+ /* Table offset=0, BIR=0 */
+ read_val = 0x00000000;
+ break;
+ case 0xb8:
+ /* BPA offset=0xf0000, BIR=0 */
+ read_val = 0x000f0000;
+ break;
+ case 0xbc:
+ /* EA, 1 entry, no next Cap */
+ read_val = 0x00010014;
+ break;
+ case 0xc0:
+ /* DW2 for type-1 */
+ read_val = 0x00000000;
+ break;
+ case 0xc4:
+ /* Entry BEI=0, PP=0x00, SP=0xff, ES=3 */
+ read_val = 0x80ff0003;
+ break;
+ case 0xc8:
+ read_val = pem_pci->ea_entry[0];
+ break;
+ case 0xcc:
+ read_val = pem_pci->ea_entry[1];
+ break;
+ case 0xd0:
+ read_val = pem_pci->ea_entry[2];
+ break;
+ default:
+ break;
+ }
+ read_val >>= (8 * (where & 3));
+ switch (size) {
+ case 1:
+ read_val &= 0xff;
+ break;
+ case 2:
+ read_val &= 0xffff;
+ break;
+ default:
+ break;
+ }
+ *val = read_val;
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int thunder_pem_config_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ struct gen_pci *pci = bus->sysdata;
+
+ if (bus->number < pci->cfg.bus_range->start ||
+ bus->number > pci->cfg.bus_range->end)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /*
+ * The first device on the bus is the PEM PCIe bridge.
+ * Special case its config access.
+ */
+ if (bus->number == pci->cfg.bus_range->start)
+ return thunder_pem_bridge_read(bus, devfn, where, size, val);
+
+ return pci_generic_config_read(bus, devfn, where, size, val);
+}
+
+/*
+ * Some of the w1c_bits below also include read-only or non-writable
+ * reserved bits, this makes the code simpler and is OK as the bits
+ * are not affected by writing zeros to them.
+ */
+static u32 thunder_pem_bridge_w1c_bits(int where)
+{
+ u32 w1c_bits = 0;
+
+ switch (where & ~3) {
+ case 0x04: /* Command/Status */
+ case 0x1c: /* Base and I/O Limit/Secondary Status */
+ w1c_bits = 0xff000000;
+ break;
+ case 0x44: /* Power Management Control and Status */
+ w1c_bits = 0xfffffe00;
+ break;
+ case 0x78: /* Device Control/Device Status */
+ case 0x80: /* Link Control/Link Status */
+ case 0x88: /* Slot Control/Slot Status */
+ case 0x90: /* Root Status */
+ case 0xa0: /* Link Control 2 Registers/Link Status 2 */
+ w1c_bits = 0xffff0000;
+ break;
+ case 0x104: /* Uncorrectable Error Status */
+ case 0x110: /* Correctable Error Status */
+ case 0x130: /* Error Status */
+ case 0x160: /* Link Control 4 */
+ w1c_bits = 0xffffffff;
+ break;
+ default:
+ break;
+ }
+ return w1c_bits;
+}
+
+static int thunder_pem_bridge_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ struct gen_pci *pci = bus->sysdata;
+ struct thunder_pem_pci *pem_pci;
+ u64 write_val, read_val;
+ u32 mask = 0;
+
+ pem_pci = container_of(pci, struct thunder_pem_pci, gen_pci);
+
+ if (devfn != 0 || where >= 2048)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /*
+ * 32-bit accesses only. If the write is for a size smaller
+ * than 32-bits, we must first read the 32-bit value and merge
+ * in the desired bits and then write the whole 32-bits back
+ * out.
+ */
+ switch (size) {
+ case 1:
+ read_val = where & ~3ull;
+ writeq(read_val, pem_pci->pem_reg_base + PEM_CFG_RD);
+ read_val = readq(pem_pci->pem_reg_base + PEM_CFG_RD);
+ read_val >>= 32;
+ mask = ~(0xff << (8 * (where & 3)));
+ read_val &= mask;
+ val = (val & 0xff) << (8 * (where & 3));
+ val |= (u32)read_val;
+ break;
+ case 2:
+ read_val = where & ~3ull;
+ writeq(read_val, pem_pci->pem_reg_base + PEM_CFG_RD);
+ read_val = readq(pem_pci->pem_reg_base + PEM_CFG_RD);
+ read_val >>= 32;
+ mask = ~(0xffff << (8 * (where & 3)));
+ read_val &= mask;
+ val = (val & 0xffff) << (8 * (where & 3));
+ val |= (u32)read_val;
+ break;
+ default:
+ break;
+ }
+
+ /*
+ * By expanding the write width to 32 bits, we may
+ * inadvertently hit some W1C bits that were not intended to
+ * be written. Calculate the mask that must be applied to the
+ * data to be written to avoid these cases.
+ */
+ if (mask) {
+ u32 w1c_bits = thunder_pem_bridge_w1c_bits(where);
+
+ if (w1c_bits) {
+ mask &= w1c_bits;
+ val &= ~mask;
+ }
+ }
+
+ /*
+ * Low order bits are the config address, the high order 32
+ * bits are the data to be written.
+ */
+ write_val = where & ~3ull;
+ write_val |= (((u64)val) << 32);
+ writeq(write_val, pem_pci->pem_reg_base + PEM_CFG_WR);
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int thunder_pem_config_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ struct gen_pci *pci = bus->sysdata;
+
+ if (bus->number < pci->cfg.bus_range->start ||
+ bus->number > pci->cfg.bus_range->end)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * The first device on the bus is the PEM PCIe bridge.
+ * Special case its config access.
+ */
+ if (bus->number == pci->cfg.bus_range->start)
+ return thunder_pem_bridge_write(bus, devfn, where, size, val);
+
+
+ return pci_generic_config_write(bus, devfn, where, size, val);
+}
+
+static struct gen_pci_cfg_bus_ops thunder_pem_bus_ops = {
+ .bus_shift = 24,
+ .ops = {
+ .map_bus = thunder_pem_map_bus,
+ .read = thunder_pem_config_read,
+ .write = thunder_pem_config_write,
+ }
+};
+
+static const struct of_device_id thunder_pem_of_match[] = {
+ { .compatible = "cavium,pci-host-thunder-pem",
+ .data = &thunder_pem_bus_ops },
+
+ { },
+};
+MODULE_DEVICE_TABLE(of, thunder_pem_of_match);
+
+static int thunder_pem_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct of_device_id *of_id;
+ resource_size_t bar4_start;
+ struct resource *res_pem;
+ struct thunder_pem_pci *pem_pci;
+
+ pem_pci = devm_kzalloc(dev, sizeof(*pem_pci), GFP_KERNEL);
+ if (!pem_pci)
+ return -ENOMEM;
+
+ of_id = of_match_node(thunder_pem_of_match, dev->of_node);
+ pem_pci->gen_pci.cfg.ops = (struct gen_pci_cfg_bus_ops *)of_id->data;
+
+ /*
+ * The second register range is the PEM bridge to the PCIe
+ * bus. It has a different config access method than those
+ * devices behind the bridge.
+ */
+ res_pem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res_pem) {
+ dev_err(dev, "missing \"reg[1]\"property\n");
+ return -EINVAL;
+ }
+
+ pem_pci->pem_reg_base = devm_ioremap(dev, res_pem->start, 0x10000);
+ if (!pem_pci->pem_reg_base)
+ return -ENOMEM;
+
+ /*
+ * The MSI-X BAR for the PEM and AER interrupts is located at
+ * a fixed offset from the PEM register base. Generate a
+ * fragment of the synthesized Enhanced Allocation capability
+ * structure here for the BAR.
+ */
+ bar4_start = res_pem->start + 0xf00000;
+ pem_pci->ea_entry[0] = (u32)bar4_start | 2;
+ pem_pci->ea_entry[1] = (u32)(res_pem->end - bar4_start) & ~3u;
+ pem_pci->ea_entry[2] = (u32)(bar4_start >> 32);
+
+ return pci_host_common_probe(pdev, &pem_pci->gen_pci);
+}
+
+static struct platform_driver thunder_pem_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .of_match_table = thunder_pem_of_match,
+ },
+ .probe = thunder_pem_probe,
+};
+module_platform_driver(thunder_pem_driver);
+
+MODULE_DESCRIPTION("Thunder PEM PCIe host driver");
+MODULE_LICENSE("GPL v2");