1 files changed, 0 insertions, 120 deletions
diff --git a/drivers/pcmcia/sa1100_simpad.c b/drivers/pcmcia/sa1100_simpad.c
deleted file mode 100644
index 73fd37968b6a..000000000000
--- a/drivers/pcmcia/sa1100_simpad.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * drivers/pcmcia/sa1100_simpad.c
- *
- * PCMCIA implementation routines for simpad
- *
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <mach/simpad.h>
-#include "sa1100_generic.h"
- 
-static int simpad_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-
-	simpad_clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
-
-	skt->stat[SOC_STAT_CD].gpio = GPIO_CF_CD;
-	skt->stat[SOC_STAT_CD].name = "CF_CD";
-	skt->stat[SOC_STAT_RDY].gpio = GPIO_CF_IRQ;
-	skt->stat[SOC_STAT_RDY].name = "CF_RDY";
-
-	return 0;
-}
-
-static void simpad_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	/* Disable CF bus: */
-	/*simpad_set_cs3_bit(PCMCIA_BUFF_DIS);*/
-	simpad_clear_cs3_bit(PCMCIA_RESET);
-}
-
-static void
-simpad_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-			   struct pcmcia_state *state)
-{
-	long cs3reg = simpad_get_cs3_ro();
-
-	/* the detect signal is inverted - fix that up here */
-	state->detect = !state->detect;
-
-	state->bvd1 = 1; /* Might be cs3reg & PCMCIA_BVD1 */
-	state->bvd2 = 1; /* Might be cs3reg & PCMCIA_BVD2 */
-
-	if ((cs3reg & (PCMCIA_VS1|PCMCIA_VS2)) ==
-			(PCMCIA_VS1|PCMCIA_VS2)) {
-		state->vs_3v=0;
-		state->vs_Xv=0;
-	} else {
-		state->vs_3v=1;
-		state->vs_Xv=0;
-	}
-}
-
-static int
-simpad_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-			       const socket_state_t *state)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	/* Murphy: see table of MIC2562a-1 */
-	switch (state->Vcc) {
-	case 0:
-		simpad_clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
-		break;
-
-	case 33:  
-		simpad_clear_cs3_bit(VCC_3V_EN|EN1);
-		simpad_set_cs3_bit(VCC_5V_EN|EN0);
-		break;
-
-	case 50:
-		simpad_clear_cs3_bit(VCC_5V_EN|EN1);
-		simpad_set_cs3_bit(VCC_3V_EN|EN0);
-		break;
-
-	default:
-		printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
-			__func__, state->Vcc);
-		simpad_clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
-		local_irq_restore(flags);
-		return -1;
-	}
-
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static void simpad_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
-{
-	simpad_set_cs3_bit(PCMCIA_RESET);
-}
-
-static struct pcmcia_low_level simpad_pcmcia_ops = { 
-	.owner			= THIS_MODULE,
-	.hw_init		= simpad_pcmcia_hw_init,
-	.hw_shutdown		= simpad_pcmcia_hw_shutdown,
-	.socket_state		= simpad_pcmcia_socket_state,
-	.configure_socket	= simpad_pcmcia_configure_socket,
-	.socket_suspend		= simpad_pcmcia_socket_suspend,
-};
-
-int pcmcia_simpad_init(struct device *dev)
-{
-	int ret = -ENODEV;
-
-	if (machine_is_simpad())
-		ret = sa11xx_drv_pcmcia_probe(dev, &simpad_pcmcia_ops, 1, 1);
-
-	return ret;
-}