diff options
Diffstat (limited to 'drivers/phy/motorola/phy-mapphone-mdm6600.c')
| -rw-r--r-- | drivers/phy/motorola/phy-mapphone-mdm6600.c | 44 |
1 files changed, 20 insertions, 24 deletions
diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c index 1d567604b650..fd0e0cd1c1cf 100644 --- a/drivers/phy/motorola/phy-mapphone-mdm6600.c +++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c @@ -122,16 +122,10 @@ static int phy_mdm6600_power_on(struct phy *x) { struct phy_mdm6600 *ddata = phy_get_drvdata(x); struct gpio_desc *enable_gpio = ddata->ctrl_gpios[PHY_MDM6600_ENABLE]; - int error; if (!ddata->enabled) return -ENODEV; - error = pinctrl_pm_select_default_state(ddata->dev); - if (error) - dev_warn(ddata->dev, "%s: error with default_state: %i\n", - __func__, error); - gpiod_set_value_cansleep(enable_gpio, 1); /* Allow aggressive PM for USB, it's only needed for n_gsm port */ @@ -160,11 +154,6 @@ static int phy_mdm6600_power_off(struct phy *x) gpiod_set_value_cansleep(enable_gpio, 0); - error = pinctrl_pm_select_sleep_state(ddata->dev); - if (error) - dev_warn(ddata->dev, "%s: error with sleep_state: %i\n", - __func__, error); - return 0; } @@ -188,9 +177,7 @@ static void phy_mdm6600_cmd(struct phy_mdm6600 *ddata, int val) values[0] = val; - gpiod_set_array_value_cansleep(PHY_MDM6600_NR_CMD_LINES, - ddata->cmd_gpios->desc, - ddata->cmd_gpios->info, values); + gpiod_multi_set_value_cansleep(ddata->cmd_gpios, values); } /** @@ -456,6 +443,7 @@ static void phy_mdm6600_device_power_off(struct phy_mdm6600 *ddata) { struct gpio_desc *reset_gpio = ddata->ctrl_gpios[PHY_MDM6600_RESET]; + int error; ddata->enabled = false; phy_mdm6600_cmd(ddata, PHY_MDM6600_CMD_BP_SHUTDOWN_REQ); @@ -471,6 +459,17 @@ static void phy_mdm6600_device_power_off(struct phy_mdm6600 *ddata) } else { dev_err(ddata->dev, "Timed out powering down\n"); } + + /* + * Keep reset gpio high with padconf internal pull-up resistor to + * prevent modem from waking up during deeper SoC idle states. The + * gpio bank lines can have glitches if not in the always-on wkup + * domain. + */ + error = pinctrl_pm_select_sleep_state(ddata->dev); + if (error) + dev_warn(ddata->dev, "%s: error with sleep_state: %i\n", + __func__, error); } static void phy_mdm6600_deferred_power_on(struct work_struct *work) @@ -571,12 +570,6 @@ static int phy_mdm6600_probe(struct platform_device *pdev) ddata->dev = &pdev->dev; platform_set_drvdata(pdev, ddata); - /* Active state selected in phy_mdm6600_power_on() */ - error = pinctrl_pm_select_sleep_state(ddata->dev); - if (error) - dev_warn(ddata->dev, "%s: error with sleep_state: %i\n", - __func__, error); - error = phy_mdm6600_init_lines(ddata); if (error) return error; @@ -627,10 +620,12 @@ idle: pm_runtime_put_autosuspend(ddata->dev); cleanup: - if (error < 0) + if (error < 0) { phy_mdm6600_device_power_off(ddata); - pm_runtime_disable(ddata->dev); - pm_runtime_dont_use_autosuspend(ddata->dev); + pm_runtime_disable(ddata->dev); + pm_runtime_dont_use_autosuspend(ddata->dev); + } + return error; } @@ -639,6 +634,7 @@ static void phy_mdm6600_remove(struct platform_device *pdev) struct phy_mdm6600 *ddata = platform_get_drvdata(pdev); struct gpio_desc *reset_gpio = ddata->ctrl_gpios[PHY_MDM6600_RESET]; + pm_runtime_get_noresume(ddata->dev); pm_runtime_dont_use_autosuspend(ddata->dev); pm_runtime_put_sync(ddata->dev); pm_runtime_disable(ddata->dev); @@ -657,7 +653,7 @@ static void phy_mdm6600_remove(struct platform_device *pdev) static struct platform_driver phy_mdm6600_driver = { .probe = phy_mdm6600_probe, - .remove_new = phy_mdm6600_remove, + .remove = phy_mdm6600_remove, .driver = { .name = "phy-mapphone-mdm6600", .pm = &phy_mdm6600_pm_ops, |