diff options
Diffstat (limited to 'drivers/phy/qualcomm/Kconfig')
| -rw-r--r-- | drivers/phy/qualcomm/Kconfig | 190 |
1 files changed, 170 insertions, 20 deletions
diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig index 32f7d34eb784..60a0ead127fa 100644 --- a/drivers/phy/qualcomm/Kconfig +++ b/drivers/phy/qualcomm/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # # Phy drivers for Qualcomm and Atheros platforms # @@ -17,6 +18,23 @@ config PHY_QCOM_APQ8064_SATA depends on OF select GENERIC_PHY +config PHY_QCOM_EDP + tristate "Qualcomm eDP PHY driver" + depends on ARCH_QCOM || COMPILE_TEST + depends on OF + depends on COMMON_CLK + select GENERIC_PHY + help + Enable this driver to support the Qualcomm eDP PHY found in various + Qualcomm chipsets. + +config PHY_QCOM_IPQ4019_USB + tristate "Qualcomm IPQ4019 USB PHY driver" + depends on OF && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s. + config PHY_QCOM_IPQ806X_SATA tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" depends on ARCH_QCOM @@ -24,13 +42,77 @@ config PHY_QCOM_IPQ806X_SATA depends on OF select GENERIC_PHY -config PHY_QCOM_QMP - tristate "Qualcomm QMP PHY Driver" +config PHY_QCOM_PCIE2 + tristate "Qualcomm PCIe Gen2 PHY Driver" depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) select GENERIC_PHY help - Enable this to support the QMP PHY transceiver that is used - with controllers such as PCIe, UFS, and USB on Qualcomm chips. + Enable this to support the Qualcomm PCIe PHY, used with the Synopsys + based PCIe controller. + +menuconfig PHY_QCOM_QMP + tristate "Qualcomm QMP PHY Drivers" + depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) + +if PHY_QCOM_QMP + +config PHY_QCOM_QMP_COMBO + tristate "Qualcomm QMP Combo PHY Driver" + default PHY_QCOM_QMP + depends on TYPEC || TYPEC=n + depends on DRM || DRM=n + select GENERIC_PHY + select MFD_SYSCON + select DRM_AUX_BRIDGE if DRM_BRIDGE + help + Enable this to support the QMP Combo PHY transceiver that is used + with USB3 and DisplayPort controllers on Qualcomm chips. + +config PHY_QCOM_QMP_PCIE + tristate "Qualcomm QMP PCIe PHY Driver" + depends on PCI || COMPILE_TEST + select GENERIC_PHY + default PHY_QCOM_QMP + help + Enable this to support the QMP PCIe PHY transceiver that is used + with PCIe controllers on Qualcomm chips. + +config PHY_QCOM_QMP_PCIE_8996 + tristate "Qualcomm QMP PCIe 8996 PHY Driver" + depends on PCI || COMPILE_TEST + select GENERIC_PHY + default PHY_QCOM_QMP + help + Enable this to support the QMP PCIe PHY transceiver that is used + with PCIe controllers on Qualcomm msm8996 chips. + +config PHY_QCOM_QMP_UFS + tristate "Qualcomm QMP UFS PHY Driver" + select GENERIC_PHY + default PHY_QCOM_QMP + help + Enable this to support the QMP UFS PHY transceiver that is used + with UFS controllers on Qualcomm chips. + +config PHY_QCOM_QMP_USB + tristate "Qualcomm QMP USB PHY Driver" + select GENERIC_PHY + default PHY_QCOM_QMP + help + Enable this to support the QMP USB PHY transceiver that is used + with USB3 controllers on Qualcomm chips. + +config PHY_QCOM_QMP_USB_LEGACY + tristate "Qualcomm QMP legacy USB PHY Driver" + select GENERIC_PHY + default n + help + Enable this legacy driver to support the QMP USB+DisplayPort Combo + PHY transceivers working only in USB3 mode on Qualcomm chips. This + driver exists only for compatibility with older device trees, + existing users have been migrated to PHY_QCOM_QMP_COMBO driver. + +endif # PHY_QCOM_QMP config PHY_QCOM_QUSB2 tristate "Qualcomm QUSB2 PHY Driver" @@ -43,29 +125,48 @@ config PHY_QCOM_QUSB2 PHY which is usually paired with either the ChipIdea or Synopsys DWC3 USB IPs on MSM SOCs. -config PHY_QCOM_UFS - tristate "Qualcomm UFS PHY driver" - depends on OF && ARCH_QCOM +config PHY_QCOM_EUSB2_REPEATER + tristate "Qualcomm PMIC eUSB2 Repeater Driver" + depends on OF && (ARCH_QCOM || COMPILE_TEST) select GENERIC_PHY help - Support for UFS PHY on QCOM chipsets. - -if PHY_QCOM_UFS + Enable support for the USB high-speed eUSB2 repeater on Qualcomm + PMICs. The repeater is paired with a Synopsys or M31 eUSB2 Phy + on Qualcomm SOCs. -config PHY_QCOM_UFS_14NM - tristate - default PHY_QCOM_UFS +config PHY_QCOM_M31_USB + tristate "Qualcomm M31 HS PHY driver support" + depends on USB && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY help - Support for 14nm UFS QMP phy present on QCOM chipsets. + Enable this to support M31 HS PHY transceivers on Qualcomm chips + with DWC3 USB core. It handles PHY initialization, clock + management required after resetting the hardware and power + management. This driver is required even for peripheral only or + host only mode configurations. -config PHY_QCOM_UFS_20NM - tristate - default PHY_QCOM_UFS - depends on BROKEN +config PHY_QCOM_UNIPHY_PCIE_28LP + bool "PCIE UNIPHY 28LP PHY driver" + depends on ARCH_QCOM + depends on COMMON_CLK + depends on HAS_IOMEM + depends on OF + select GENERIC_PHY help - Support for 20nm UFS QMP phy present on QCOM chipsets. + Enable this to support the PCIe UNIPHY 28LP phy transceiver that + is used with PCIe controllers on Qualcomm IPQ5332 chips. It + handles PHY initialization, clock management required after + resetting the hardware and power management. -endif +config PHY_QCOM_M31_EUSB + tristate "Qualcomm M31 eUSB2 PHY driver support" + depends on USB && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + Enable this to support M31 EUSB2 PHY transceivers on Qualcomm + chips with DWC3 USB core. It supports initializing and cleaning + up of the associated USB repeater that is paired with the eUSB2 + PHY. config PHY_QCOM_USB_HS tristate "Qualcomm USB HS PHY module" @@ -76,9 +177,58 @@ config PHY_QCOM_USB_HS Support for the USB high-speed ULPI compliant phy on Qualcomm chipsets. +config PHY_QCOM_USB_SNPS_FEMTO_V2 + tristate "Qualcomm SNPS FEMTO USB HS PHY V2 module" + depends on OF && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + Enable support for the USB high-speed SNPS Femto phy on Qualcomm + chipsets. This PHY has differences in the register map compared + to the V1 variants. The PHY is paired with a Synopsys DWC3 USB + controller on Qualcomm SOCs. + config PHY_QCOM_USB_HSIC tristate "Qualcomm USB HSIC ULPI PHY module" depends on USB_ULPI_BUS select GENERIC_PHY help Support for the USB HSIC ULPI compliant PHY on QCOM chipsets. + +config PHY_QCOM_USB_HS_28NM + tristate "Qualcomm 28nm High-Speed PHY" + depends on OF && (ARCH_QCOM || COMPILE_TEST) + depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in + select GENERIC_PHY + help + Enable this to support the Qualcomm Synopsys DesignWare Core 28nm + High-Speed PHY driver. This driver supports the Hi-Speed PHY which + is usually paired with either the ChipIdea or Synopsys DWC3 USB + IPs on MSM SOCs. + +config PHY_QCOM_USB_SS + tristate "Qualcomm USB Super-Speed PHY driver" + depends on OF && (ARCH_QCOM || COMPILE_TEST) + depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in + select GENERIC_PHY + help + Enable this to support the Super-Speed USB transceiver on various + Qualcomm chipsets. + +config PHY_QCOM_IPQ806X_USB + tristate "Qualcomm IPQ806x DWC3 USB PHY driver" + depends on HAS_IOMEM + depends on OF && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + This option enables support for the Synopsis PHYs present inside the + Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports + both HS and SS PHY controllers. + +config PHY_QCOM_SGMII_ETH + tristate "Qualcomm DWMAC SGMII SerDes/PHY driver" + depends on OF && (ARCH_QCOM || COMPILE_TEST) + depends on HAS_IOMEM + select GENERIC_PHY + help + Enable this to support the internal SerDes/SGMII PHY on various + Qualcomm chipsets. |