diff options
Diffstat (limited to 'drivers/phy/rockchip/phy-rockchip-naneng-combphy.c')
| -rw-r--r-- | drivers/phy/rockchip/phy-rockchip-naneng-combphy.c | 1460 |
1 files changed, 1460 insertions, 0 deletions
diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c new file mode 100644 index 000000000000..7f8fc8e6d489 --- /dev/null +++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c @@ -0,0 +1,1460 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Rockchip PIPE USB3.0 PCIE SATA Combo Phy driver + * + * Copyright (C) 2021 Rockchip Electronics Co., Ltd. + */ + +#include <dt-bindings/phy/phy.h> +#include <linux/clk.h> +#include <linux/mfd/syscon.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/reset.h> +#include <linux/units.h> + +#define BIT_WRITEABLE_SHIFT 16 +#define REF_CLOCK_24MHz (24 * HZ_PER_MHZ) +#define REF_CLOCK_25MHz (25 * HZ_PER_MHZ) +#define REF_CLOCK_100MHz (100 * HZ_PER_MHZ) + +/* RK3528 COMBO PHY REG */ +#define RK3528_PHYREG5 0x14 +#define RK3528_PHYREG5_GATE_TX_PCK_SEL BIT(3) +#define RK3528_PHYREG5_GATE_TX_PCK_DLY_PLL_OFF BIT(3) +#define RK3528_PHYREG6 0x18 +#define RK3528_PHYREG6_PLL_KVCO GENMASK(12, 10) +#define RK3528_PHYREG6_PLL_KVCO_VALUE 0x2 +#define RK3528_PHYREG6_SSC_DIR GENMASK(5, 4) +#define RK3528_PHYREG6_SSC_UPWARD 0 +#define RK3528_PHYREG6_SSC_DOWNWARD 1 + +#define RK3528_PHYREG40 0x100 +#define RK3528_PHYREG40_SSC_EN BIT(20) +#define RK3528_PHYREG40_SSC_CNT GENMASK(10, 0) +#define RK3528_PHYREG40_SSC_CNT_VALUE 0x17d + +#define RK3528_PHYREG42 0x108 +#define RK3528_PHYREG42_CKDRV_CLK_SEL BIT(29) +#define RK3528_PHYREG42_CKDRV_CLK_PLL 0 +#define RK3528_PHYREG42_CKDRV_CLK_CKRCV 1 +#define RK3528_PHYREG42_PLL_LPF_R1_ADJ GENMASK(10, 7) +#define RK3528_PHYREG42_PLL_LPF_R1_ADJ_VALUE 0x9 +#define RK3528_PHYREG42_PLL_CHGPUMP_CUR_ADJ GENMASK(6, 4) +#define RK3528_PHYREG42_PLL_CHGPUMP_CUR_ADJ_VALUE 0x7 +#define RK3528_PHYREG42_PLL_KVCO_ADJ GENMASK(2, 0) +#define RK3528_PHYREG42_PLL_KVCO_ADJ_VALUE 0x0 + +#define RK3528_PHYREG80 0x200 +#define RK3528_PHYREG80_CTLE_EN BIT(17) + +#define RK3528_PHYREG81 0x204 +#define RK3528_PHYREG81_CDR_PHASE_PATH_GAIN_2X BIT(5) +#define RK3528_PHYREG81_SLEW_RATE_CTRL GENMASK(2, 0) +#define RK3528_PHYREG81_SLEW_RATE_CTRL_SLOW 0x7 + +#define RK3528_PHYREG83 0x20c +#define RK3528_PHYREG83_RX_SQUELCH GENMASK(2, 0) +#define RK3528_PHYREG83_RX_SQUELCH_VALUE 0x6 + +#define RK3528_PHYREG86 0x218 +#define RK3528_PHYREG86_RTERM_DET_CLK_EN BIT(14) + +/* RK3568 COMBO PHY REG */ +#define RK3568_PHYREG6 0x14 +#define RK3568_PHYREG6_PLL_DIV_MASK GENMASK(7, 6) +#define RK3568_PHYREG6_PLL_DIV_SHIFT 6 +#define RK3568_PHYREG6_PLL_DIV_2 1 + +#define RK3568_PHYREG7 0x18 +#define RK3568_PHYREG7_TX_RTERM_MASK GENMASK(7, 4) +#define RK3568_PHYREG7_TX_RTERM_SHIFT 4 +#define RK3568_PHYREG7_TX_RTERM_50OHM 8 +#define RK3568_PHYREG7_RX_RTERM_MASK GENMASK(3, 0) +#define RK3568_PHYREG7_RX_RTERM_SHIFT 0 +#define RK3568_PHYREG7_RX_RTERM_44OHM 15 + +#define RK3568_PHYREG8 0x1C +#define RK3568_PHYREG8_SSC_EN BIT(4) + +#define RK3568_PHYREG11 0x28 +#define RK3568_PHYREG11_SU_TRIM_0_7 0xF0 + +#define RK3568_PHYREG12 0x2C +#define RK3568_PHYREG12_PLL_LPF_ADJ_VALUE 4 + +#define RK3568_PHYREG13 0x30 +#define RK3568_PHYREG13_RESISTER_MASK GENMASK(5, 4) +#define RK3568_PHYREG13_RESISTER_SHIFT 0x4 +#define RK3568_PHYREG13_RESISTER_HIGH_Z 3 +#define RK3568_PHYREG13_CKRCV_AMP0 BIT(7) + +#define RK3568_PHYREG14 0x34 +#define RK3568_PHYREG14_CKRCV_AMP1 BIT(0) + +#define RK3568_PHYREG15 0x38 +#define RK3568_PHYREG15_CTLE_EN BIT(0) +#define RK3568_PHYREG15_SSC_CNT_MASK GENMASK(7, 6) +#define RK3568_PHYREG15_SSC_CNT_SHIFT 6 +#define RK3568_PHYREG15_SSC_CNT_VALUE 1 + +#define RK3568_PHYREG16 0x3C +#define RK3568_PHYREG16_SSC_CNT_VALUE 0x5f + +#define RK3568_PHYREG18 0x44 +#define RK3568_PHYREG18_PLL_LOOP 0x32 + +#define RK3568_PHYREG30 0x74 +#define RK3568_PHYREG30_GATE_TX_PCK_SEL BIT(7) +#define RK3568_PHYREG30_GATE_TX_PCK_DLY_PLL_OFF BIT(7) + +#define RK3568_PHYREG32 0x7C +#define RK3568_PHYREG32_SSC_MASK GENMASK(7, 4) +#define RK3568_PHYREG32_SSC_DIR_MASK GENMASK(5, 4) +#define RK3568_PHYREG32_SSC_DIR_SHIFT 4 +#define RK3568_PHYREG32_SSC_UPWARD 0 +#define RK3568_PHYREG32_SSC_DOWNWARD 1 +#define RK3568_PHYREG32_SSC_OFFSET_MASK GENMASK(7, 6) +#define RK3568_PHYREG32_SSC_OFFSET_SHIFT 6 +#define RK3568_PHYREG32_SSC_OFFSET_500PPM 1 + +#define RK3568_PHYREG33 0x80 +#define RK3568_PHYREG33_PLL_KVCO_MASK GENMASK(4, 2) +#define RK3568_PHYREG33_PLL_KVCO_SHIFT 2 +#define RK3568_PHYREG33_PLL_KVCO_VALUE 2 +#define RK3576_PHYREG33_PLL_KVCO_VALUE 4 + +/* RK3588 COMBO PHY registers */ +#define RK3588_PHYREG27 0x6C +#define RK3588_PHYREG27_RX_TRIM 0x4C + +/* RK3576 COMBO PHY registers */ +#define RK3576_PHYREG10 0x24 +#define RK3576_PHYREG10_SSC_PCM_MASK GENMASK(3, 0) +#define RK3576_PHYREG10_SSC_PCM_3500PPM 7 + +#define RK3576_PHYREG17 0x40 + +#define RK3576_PHYREG21 0x50 +#define RK3576_PHYREG21_RX_SQUELCH_VAL 0x0D + +#define RK3576_PHYREG30 0x74 + +struct rockchip_combphy_priv; + +struct combphy_reg { + u16 offset; + u16 bitend; + u16 bitstart; + u16 disable; + u16 enable; +}; + +struct rockchip_combphy_grfcfg { + struct combphy_reg pcie_mode_set; + struct combphy_reg usb_mode_set; + struct combphy_reg sgmii_mode_set; + struct combphy_reg qsgmii_mode_set; + struct combphy_reg pipe_rxterm_set; + struct combphy_reg pipe_txelec_set; + struct combphy_reg pipe_txcomp_set; + struct combphy_reg pipe_clk_24m; + struct combphy_reg pipe_clk_25m; + struct combphy_reg pipe_clk_100m; + struct combphy_reg pipe_phymode_sel; + struct combphy_reg pipe_rate_sel; + struct combphy_reg pipe_rxterm_sel; + struct combphy_reg pipe_txelec_sel; + struct combphy_reg pipe_txcomp_sel; + struct combphy_reg pipe_clk_ext; + struct combphy_reg pipe_sel_usb; + struct combphy_reg pipe_sel_qsgmii; + struct combphy_reg pipe_phy_status; + struct combphy_reg con0_for_pcie; + struct combphy_reg con1_for_pcie; + struct combphy_reg con2_for_pcie; + struct combphy_reg con3_for_pcie; + struct combphy_reg con0_for_sata; + struct combphy_reg con1_for_sata; + struct combphy_reg con2_for_sata; + struct combphy_reg con3_for_sata; + struct combphy_reg pipe_con0_for_sata; + struct combphy_reg pipe_con1_for_sata; + struct combphy_reg pipe_xpcs_phy_ready; + struct combphy_reg pipe_pcie1l0_sel; + struct combphy_reg pipe_pcie1l1_sel; + struct combphy_reg u3otg0_port_en; + struct combphy_reg u3otg1_port_en; +}; + +struct rockchip_combphy_cfg { + unsigned int num_phys; + unsigned int phy_ids[3]; + const struct rockchip_combphy_grfcfg *grfcfg; + int (*combphy_cfg)(struct rockchip_combphy_priv *priv); +}; + +struct rockchip_combphy_priv { + u8 type; + int id; + void __iomem *mmio; + int num_clks; + struct clk_bulk_data *clks; + struct device *dev; + struct regmap *pipe_grf; + struct regmap *phy_grf; + struct phy *phy; + struct reset_control *phy_rst; + const struct rockchip_combphy_cfg *cfg; + bool enable_ssc; + bool ext_refclk; + struct clk *refclk; +}; + +static void rockchip_combphy_updatel(struct rockchip_combphy_priv *priv, + int mask, int val, int reg) +{ + unsigned int temp; + + temp = readl(priv->mmio + reg); + temp = (temp & ~(mask)) | val; + writel(temp, priv->mmio + reg); +} + +static int rockchip_combphy_param_write(struct regmap *base, + const struct combphy_reg *reg, bool en) +{ + u32 val, mask, tmp; + + tmp = en ? reg->enable : reg->disable; + mask = GENMASK(reg->bitend, reg->bitstart); + val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT); + + return regmap_write(base, reg->offset, val); +} + +static u32 rockchip_combphy_is_ready(struct rockchip_combphy_priv *priv) +{ + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; + u32 mask, val; + + mask = GENMASK(cfg->pipe_phy_status.bitend, + cfg->pipe_phy_status.bitstart); + + regmap_read(priv->phy_grf, cfg->pipe_phy_status.offset, &val); + val = (val & mask) >> cfg->pipe_phy_status.bitstart; + + return val; +} + +static int rockchip_combphy_init(struct phy *phy) +{ + struct rockchip_combphy_priv *priv = phy_get_drvdata(phy); + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; + u32 val; + int ret; + + ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks); + if (ret) { + dev_err(priv->dev, "failed to enable clks\n"); + return ret; + } + + switch (priv->type) { + case PHY_TYPE_PCIE: + case PHY_TYPE_USB3: + case PHY_TYPE_SATA: + case PHY_TYPE_SGMII: + case PHY_TYPE_QSGMII: + if (priv->cfg->combphy_cfg) + ret = priv->cfg->combphy_cfg(priv); + break; + default: + dev_err(priv->dev, "incompatible PHY type\n"); + ret = -EINVAL; + break; + } + + if (ret) { + dev_err(priv->dev, "failed to init phy for phy type %x\n", priv->type); + goto err_clk; + } + + ret = reset_control_deassert(priv->phy_rst); + if (ret) + goto err_clk; + + if (priv->type == PHY_TYPE_USB3) { + ret = readx_poll_timeout_atomic(rockchip_combphy_is_ready, + priv, val, + val == cfg->pipe_phy_status.enable, + 10, 1000); + if (ret) + dev_warn(priv->dev, "wait phy status ready timeout\n"); + } + + return 0; + +err_clk: + clk_bulk_disable_unprepare(priv->num_clks, priv->clks); + + return ret; +} + +static int rockchip_combphy_exit(struct phy *phy) +{ + struct rockchip_combphy_priv *priv = phy_get_drvdata(phy); + + clk_bulk_disable_unprepare(priv->num_clks, priv->clks); + reset_control_assert(priv->phy_rst); + + return 0; +} + +static const struct phy_ops rockchip_combphy_ops = { + .init = rockchip_combphy_init, + .exit = rockchip_combphy_exit, + .owner = THIS_MODULE, +}; + +static struct phy *rockchip_combphy_xlate(struct device *dev, const struct of_phandle_args *args) +{ + struct rockchip_combphy_priv *priv = dev_get_drvdata(dev); + + if (args->args_count != 1) { + dev_err(dev, "invalid number of arguments\n"); + return ERR_PTR(-EINVAL); + } + + if (priv->type != PHY_NONE && priv->type != args->args[0]) + dev_warn(dev, "phy type select %d overwriting type %d\n", + args->args[0], priv->type); + + priv->type = args->args[0]; + + return priv->phy; +} + +static int rockchip_combphy_parse_dt(struct device *dev, struct rockchip_combphy_priv *priv) +{ + int i; + + priv->num_clks = devm_clk_bulk_get_all(dev, &priv->clks); + if (priv->num_clks < 1) + return -EINVAL; + + priv->refclk = NULL; + for (i = 0; i < priv->num_clks; i++) { + if (!strncmp(priv->clks[i].id, "ref", 3)) { + priv->refclk = priv->clks[i].clk; + break; + } + } + + if (!priv->refclk) { + dev_err(dev, "no refclk found\n"); + return -EINVAL; + } + + priv->pipe_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pipe-grf"); + if (IS_ERR(priv->pipe_grf)) { + dev_err(dev, "failed to find peri_ctrl pipe-grf regmap\n"); + return PTR_ERR(priv->pipe_grf); + } + + priv->phy_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pipe-phy-grf"); + if (IS_ERR(priv->phy_grf)) { + dev_err(dev, "failed to find peri_ctrl pipe-phy-grf regmap\n"); + return PTR_ERR(priv->phy_grf); + } + + priv->enable_ssc = device_property_present(dev, "rockchip,enable-ssc"); + + priv->ext_refclk = device_property_present(dev, "rockchip,ext-refclk"); + + priv->phy_rst = devm_reset_control_get_exclusive(dev, "phy"); + /* fallback to old behaviour */ + if (PTR_ERR(priv->phy_rst) == -ENOENT) + priv->phy_rst = devm_reset_control_array_get_exclusive(dev); + if (IS_ERR(priv->phy_rst)) + return dev_err_probe(dev, PTR_ERR(priv->phy_rst), "failed to get phy reset\n"); + + return 0; +} + +static int rockchip_combphy_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + struct device *dev = &pdev->dev; + struct rockchip_combphy_priv *priv; + const struct rockchip_combphy_cfg *phy_cfg; + struct resource *res; + int ret, id; + + phy_cfg = of_device_get_match_data(dev); + if (!phy_cfg) { + dev_err(dev, "no OF match data provided\n"); + return -EINVAL; + } + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->mmio = devm_platform_get_and_ioremap_resource(pdev, 0, &res); + if (IS_ERR(priv->mmio)) { + ret = PTR_ERR(priv->mmio); + return ret; + } + + /* find the phy-id from the io address */ + priv->id = -ENODEV; + for (id = 0; id < phy_cfg->num_phys; id++) { + if (res->start == phy_cfg->phy_ids[id]) { + priv->id = id; + break; + } + } + + priv->dev = dev; + priv->type = PHY_NONE; + priv->cfg = phy_cfg; + + ret = rockchip_combphy_parse_dt(dev, priv); + if (ret) + return ret; + + ret = reset_control_assert(priv->phy_rst); + if (ret) { + dev_err(dev, "failed to reset phy\n"); + return ret; + } + + priv->phy = devm_phy_create(dev, NULL, &rockchip_combphy_ops); + if (IS_ERR(priv->phy)) { + dev_err(dev, "failed to create combphy\n"); + return PTR_ERR(priv->phy); + } + + dev_set_drvdata(dev, priv); + phy_set_drvdata(priv->phy, priv); + + phy_provider = devm_of_phy_provider_register(dev, rockchip_combphy_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static int rk3528_combphy_cfg(struct rockchip_combphy_priv *priv) +{ + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; + unsigned long rate; + u32 val; + + /* Set SSC downward spread spectrum */ + val = FIELD_PREP(RK3528_PHYREG6_SSC_DIR, RK3528_PHYREG6_SSC_DOWNWARD); + rockchip_combphy_updatel(priv, RK3528_PHYREG6_SSC_DIR, val, RK3528_PHYREG6); + + switch (priv->type) { + case PHY_TYPE_PCIE: + rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_pcie, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_pcie, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_pcie, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_pcie, true); + break; + case PHY_TYPE_USB3: + /* Enable adaptive CTLE for USB3.0 Rx */ + rockchip_combphy_updatel(priv, RK3528_PHYREG80_CTLE_EN, RK3528_PHYREG80_CTLE_EN, + RK3528_PHYREG80); + + /* Set slow slew rate control for PI */ + val = FIELD_PREP(RK3528_PHYREG81_SLEW_RATE_CTRL, + RK3528_PHYREG81_SLEW_RATE_CTRL_SLOW); + rockchip_combphy_updatel(priv, RK3528_PHYREG81_SLEW_RATE_CTRL, val, + RK3528_PHYREG81); + + /* Set CDR phase path with 2x gain */ + rockchip_combphy_updatel(priv, RK3528_PHYREG81_CDR_PHASE_PATH_GAIN_2X, + RK3528_PHYREG81_CDR_PHASE_PATH_GAIN_2X, RK3528_PHYREG81); + + /* Set Rx squelch input filler bandwidth */ + val = FIELD_PREP(RK3528_PHYREG83_RX_SQUELCH, RK3528_PHYREG83_RX_SQUELCH_VALUE); + rockchip_combphy_updatel(priv, RK3528_PHYREG83_RX_SQUELCH, val, RK3528_PHYREG83); + + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false); + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false); + rockchip_combphy_param_write(priv->phy_grf, &cfg->usb_mode_set, true); + rockchip_combphy_param_write(priv->pipe_grf, &cfg->u3otg0_port_en, true); + break; + default: + dev_err(priv->dev, "incompatible PHY type\n"); + return -EINVAL; + } + + rate = clk_get_rate(priv->refclk); + + switch (rate) { + case REF_CLOCK_24MHz: + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_24m, true); + if (priv->type == PHY_TYPE_USB3) { + /* Set ssc_cnt[10:0]=00101111101 & 31.5KHz */ + val = FIELD_PREP(RK3528_PHYREG40_SSC_CNT, RK3528_PHYREG40_SSC_CNT_VALUE); + rockchip_combphy_updatel(priv, RK3528_PHYREG40_SSC_CNT, val, + RK3528_PHYREG40); + } else if (priv->type == PHY_TYPE_PCIE) { + /* tx_trim[14]=1, Enable the counting clock of the rterm detect */ + rockchip_combphy_updatel(priv, RK3528_PHYREG86_RTERM_DET_CLK_EN, + RK3528_PHYREG86_RTERM_DET_CLK_EN, RK3528_PHYREG86); + } + break; + case REF_CLOCK_100MHz: + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true); + if (priv->type == PHY_TYPE_PCIE) { + /* Gate_tx_pck_sel length select for L1ss support */ + rockchip_combphy_updatel(priv, RK3528_PHYREG5_GATE_TX_PCK_SEL, + RK3528_PHYREG5_GATE_TX_PCK_DLY_PLL_OFF, RK3528_PHYREG5); + + /* PLL KVCO tuning fine */ + val = FIELD_PREP(RK3528_PHYREG6_PLL_KVCO, RK3528_PHYREG6_PLL_KVCO_VALUE); + rockchip_combphy_updatel(priv, RK3528_PHYREG6_PLL_KVCO, val, + RK3528_PHYREG6); + + /* su_trim[6:4]=111, [10:7]=1001, [2:0]=000, swing 650mv */ + writel(0x570804f0, priv->mmio + RK3528_PHYREG42); + } + break; + default: + dev_err(priv->dev, "Unsupported rate: %lu\n", rate); + return -EINVAL; + } + + if (device_property_read_bool(priv->dev, "rockchip,ext-refclk")) { + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true); + + if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) { + val = FIELD_PREP(RK3528_PHYREG42_CKDRV_CLK_SEL, + RK3528_PHYREG42_CKDRV_CLK_CKRCV); + val |= FIELD_PREP(RK3528_PHYREG42_PLL_LPF_R1_ADJ, + RK3528_PHYREG42_PLL_LPF_R1_ADJ_VALUE); + val |= FIELD_PREP(RK3528_PHYREG42_PLL_CHGPUMP_CUR_ADJ, + RK3528_PHYREG42_PLL_CHGPUMP_CUR_ADJ_VALUE); + val |= FIELD_PREP(RK3528_PHYREG42_PLL_KVCO_ADJ, + RK3528_PHYREG42_PLL_KVCO_ADJ_VALUE); + rockchip_combphy_updatel(priv, + RK3528_PHYREG42_CKDRV_CLK_SEL | + RK3528_PHYREG42_PLL_LPF_R1_ADJ | + RK3528_PHYREG42_PLL_CHGPUMP_CUR_ADJ | + RK3528_PHYREG42_PLL_KVCO_ADJ, + val, RK3528_PHYREG42); + + val = FIELD_PREP(RK3528_PHYREG6_PLL_KVCO, RK3528_PHYREG6_PLL_KVCO_VALUE); + rockchip_combphy_updatel(priv, RK3528_PHYREG6_PLL_KVCO, val, + RK3528_PHYREG6); + } + } + + if (priv->type == PHY_TYPE_PCIE) { + if (device_property_read_bool(priv->dev, "rockchip,enable-ssc")) + rockchip_combphy_updatel(priv, RK3528_PHYREG40_SSC_EN, + RK3528_PHYREG40_SSC_EN, RK3528_PHYREG40); + } + + return 0; +} + +static const struct rockchip_combphy_grfcfg rk3528_combphy_grfcfgs = { + /* pipe-phy-grf */ + .pcie_mode_set = { 0x0000, 5, 0, 0x00, 0x11 }, + .usb_mode_set = { 0x0000, 5, 0, 0x00, 0x04 }, + .pipe_rxterm_set = { 0x0000, 12, 12, 0x00, 0x01 }, + .pipe_txelec_set = { 0x0004, 1, 1, 0x00, 0x01 }, + .pipe_txcomp_set = { 0x0004, 4, 4, 0x00, 0x01 }, + .pipe_clk_24m = { 0x0004, 14, 13, 0x00, 0x00 }, + .pipe_clk_100m = { 0x0004, 14, 13, 0x00, 0x02 }, + .pipe_rxterm_sel = { 0x0008, 8, 8, 0x00, 0x01 }, + .pipe_txelec_sel = { 0x0008, 12, 12, 0x00, 0x01 }, + .pipe_txcomp_sel = { 0x0008, 15, 15, 0x00, 0x01 }, + .pipe_clk_ext = { 0x000c, 9, 8, 0x02, 0x01 }, + .pipe_phy_status = { 0x0034, 6, 6, 0x01, 0x00 }, + .con0_for_pcie = { 0x0000, 15, 0, 0x00, 0x110 }, + .con1_for_pcie = { 0x0004, 15, 0, 0x00, 0x00 }, + .con2_for_pcie = { 0x0008, 15, 0, 0x00, 0x101 }, + .con3_for_pcie = { 0x000c, 15, 0, 0x00, 0x0200 }, + /* pipe-grf */ + .u3otg0_port_en = { 0x0044, 15, 0, 0x0181, 0x1100 }, +}; + +static const struct rockchip_combphy_cfg rk3528_combphy_cfgs = { + .num_phys = 1, + .phy_ids = { + 0xffdc0000, + }, + .grfcfg = &rk3528_combphy_grfcfgs, + .combphy_cfg = rk3528_combphy_cfg, +}; + +static int rk3562_combphy_cfg(struct rockchip_combphy_priv *priv) +{ + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; + unsigned long rate; + u32 val; + + switch (priv->type) { + case PHY_TYPE_PCIE: + /* Set SSC downward spread spectrum */ + val = RK3568_PHYREG32_SSC_DOWNWARD << RK3568_PHYREG32_SSC_DIR_SHIFT; + rockchip_combphy_updatel(priv, RK3568_PHYREG32_SSC_MASK, val, RK3568_PHYREG32); + + rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_pcie, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_pcie, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_pcie, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_pcie, true); + break; + case PHY_TYPE_USB3: + /* Set SSC downward spread spectrum */ + val = RK3568_PHYREG32_SSC_DOWNWARD << RK3568_PHYREG32_SSC_DIR_SHIFT; + rockchip_combphy_updatel(priv, RK3568_PHYREG32_SSC_MASK, val, + RK3568_PHYREG32); + + /* Enable adaptive CTLE for USB3.0 Rx */ + rockchip_combphy_updatel(priv, RK3568_PHYREG15_CTLE_EN, + RK3568_PHYREG15_CTLE_EN, RK3568_PHYREG15); + + /* Set PLL KVCO fine tuning signals */ + rockchip_combphy_updatel(priv, RK3568_PHYREG33_PLL_KVCO_MASK, + BIT(3), RK3568_PHYREG33); + + /* Set PLL LPF R1 to su_trim[10:7]=1001 */ + writel(RK3568_PHYREG12_PLL_LPF_ADJ_VALUE, priv->mmio + RK3568_PHYREG12); + + /* Set PLL input clock divider 1/2 */ + val = FIELD_PREP(RK3568_PHYREG6_PLL_DIV_MASK, RK3568_PHYREG6_PLL_DIV_2); + rockchip_combphy_updatel(priv, RK3568_PHYREG6_PLL_DIV_MASK, val, RK3568_PHYREG6); + + /* Set PLL loop divider */ + writel(RK3568_PHYREG18_PLL_LOOP, priv->mmio + RK3568_PHYREG18); + + /* Set PLL KVCO to min and set PLL charge pump current to max */ + writel(RK3568_PHYREG11_SU_TRIM_0_7, priv->mmio + RK3568_PHYREG11); + + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_usb, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false); + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false); + rockchip_combphy_param_write(priv->phy_grf, &cfg->usb_mode_set, true); + break; + default: + dev_err(priv->dev, "incompatible PHY type\n"); + return -EINVAL; + } + + rate = clk_get_rate(priv->refclk); + + switch (rate) { + case REF_CLOCK_24MHz: + if (priv->type == PHY_TYPE_USB3) { + /* Set ssc_cnt[9:0]=0101111101 & 31.5KHz */ + val = FIELD_PREP(RK3568_PHYREG15_SSC_CNT_MASK, + RK3568_PHYREG15_SSC_CNT_VALUE); + rockchip_combphy_updatel(priv, RK3568_PHYREG15_SSC_CNT_MASK, + val, RK3568_PHYREG15); + + writel(RK3568_PHYREG16_SSC_CNT_VALUE, priv->mmio + RK3568_PHYREG16); + } + break; + case REF_CLOCK_25MHz: + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_25m, true); + break; + case REF_CLOCK_100MHz: + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true); + if (priv->type == PHY_TYPE_PCIE) { + /* Gate_tx_pck_sel length select for L1ss support */ + rockchip_combphy_updatel(priv, RK3568_PHYREG30_GATE_TX_PCK_SEL, + RK3568_PHYREG30_GATE_TX_PCK_DLY_PLL_OFF, + RK3568_PHYREG30); + /* PLL KVCO tuning fine */ + val = FIELD_PREP(RK3568_PHYREG33_PLL_KVCO_MASK, + RK3568_PHYREG33_PLL_KVCO_VALUE); + rockchip_combphy_updatel(priv, RK3568_PHYREG33_PLL_KVCO_MASK, + val, RK3568_PHYREG33); + + /* Enable controlling random jitter, aka RMJ */ + writel(0x4, priv->mmio + RK3568_PHYREG12); + + val = RK3568_PHYREG6_PLL_DIV_2 << RK3568_PHYREG6_PLL_DIV_SHIFT; + rockchip_combphy_updatel(priv, RK3568_PHYREG6_PLL_DIV_MASK, + val, RK3568_PHYREG6); + + writel(0x32, priv->mmio + RK3568_PHYREG18); + writel(0xf0, priv->mmio + RK3568_PHYREG11); + } + break; + default: + dev_err(priv->dev, "Unsupported rate: %lu\n", rate); + return -EINVAL; + } + + if (priv->ext_refclk) { + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true); + if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) { + val = RK3568_PHYREG13_RESISTER_HIGH_Z << RK3568_PHYREG13_RESISTER_SHIFT; + val |= RK3568_PHYREG13_CKRCV_AMP0; + rockchip_combphy_updatel(priv, RK3568_PHYREG13_RESISTER_MASK, val, + RK3568_PHYREG13); + + val = readl(priv->mmio + RK3568_PHYREG14); + val |= RK3568_PHYREG14_CKRCV_AMP1; + writel(val, priv->mmio + RK3568_PHYREG14); + } + } + + if (priv->enable_ssc) { + val = readl(priv->mmio + RK3568_PHYREG8); + val |= RK3568_PHYREG8_SSC_EN; + writel(val, priv->mmio + RK3568_PHYREG8); + } + + return 0; +} + +static const struct rockchip_combphy_grfcfg rk3562_combphy_grfcfgs = { + /* pipe-phy-grf */ + .pcie_mode_set = { 0x0000, 5, 0, 0x00, 0x11 }, + .usb_mode_set = { 0x0000, 5, 0, 0x00, 0x04 }, + .pipe_rxterm_set = { 0x0000, 12, 12, 0x00, 0x01 }, + .pipe_txelec_set = { 0x0004, 1, 1, 0x00, 0x01 }, + .pipe_txcomp_set = { 0x0004, 4, 4, 0x00, 0x01 }, + .pipe_clk_25m = { 0x0004, 14, 13, 0x00, 0x01 }, + .pipe_clk_100m = { 0x0004, 14, 13, 0x00, 0x02 }, + .pipe_phymode_sel = { 0x0008, 1, 1, 0x00, 0x01 }, + .pipe_rate_sel = { 0x0008, 2, 2, 0x00, 0x01 }, + .pipe_rxterm_sel = { 0x0008, 8, 8, 0x00, 0x01 }, + .pipe_txelec_sel = { 0x0008, 12, 12, 0x00, 0x01 }, + .pipe_txcomp_sel = { 0x0008, 15, 15, 0x00, 0x01 }, + .pipe_clk_ext = { 0x000c, 9, 8, 0x02, 0x01 }, + .pipe_sel_usb = { 0x000c, 14, 13, 0x00, 0x01 }, + .pipe_phy_status = { 0x0034, 6, 6, 0x01, 0x00 }, + .con0_for_pcie = { 0x0000, 15, 0, 0x00, 0x1000 }, + .con1_for_pcie = { 0x0004, 15, 0, 0x00, 0x0000 }, + .con2_for_pcie = { 0x0008, 15, 0, 0x00, 0x0101 }, + .con3_for_pcie = { 0x000c, 15, 0, 0x00, 0x0200 }, +}; + +static const struct rockchip_combphy_cfg rk3562_combphy_cfgs = { + .num_phys = 1, + .phy_ids = { + 0xff750000 + }, + .grfcfg = &rk3562_combphy_grfcfgs, + .combphy_cfg = rk3562_combphy_cfg, +}; + +static int rk3568_combphy_cfg(struct rockchip_combphy_priv *priv) +{ + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; + unsigned long rate; + u32 val; + + switch (priv->type) { + case PHY_TYPE_PCIE: + /* Set SSC downward spread spectrum. */ + val = RK3568_PHYREG32_SSC_DOWNWARD << RK3568_PHYREG32_SSC_DIR_SHIFT; + + rockchip_combphy_updatel(priv, RK3568_PHYREG32_SSC_MASK, val, RK3568_PHYREG32); + + rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_pcie, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_pcie, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_pcie, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_pcie, true); + break; + + case PHY_TYPE_USB3: + /* Set SSC downward spread spectrum. */ + val = RK3568_PHYREG32_SSC_DOWNWARD << RK3568_PHYREG32_SSC_DIR_SHIFT, + rockchip_combphy_updatel(priv, RK3568_PHYREG32_SSC_MASK, val, RK3568_PHYREG32); + + /* Enable adaptive CTLE for USB3.0 Rx. */ + val = readl(priv->mmio + RK3568_PHYREG15); + val |= RK3568_PHYREG15_CTLE_EN; + writel(val, priv->mmio + RK3568_PHYREG15); + + /* Set PLL KVCO fine tuning signals. */ + val = RK3568_PHYREG33_PLL_KVCO_VALUE << RK3568_PHYREG33_PLL_KVCO_SHIFT; + rockchip_combphy_updatel(priv, RK3568_PHYREG33_PLL_KVCO_MASK, val, RK3568_PHYREG33); + + /* Enable controlling random jitter. */ + writel(RK3568_PHYREG12_PLL_LPF_ADJ_VALUE, priv->mmio + RK3568_PHYREG12); + + /* Set PLL input clock divider 1/2. */ + rockchip_combphy_updatel(priv, RK3568_PHYREG6_PLL_DIV_MASK, + RK3568_PHYREG6_PLL_DIV_2 << RK3568_PHYREG6_PLL_DIV_SHIFT, + RK3568_PHYREG6); + + writel(RK3568_PHYREG18_PLL_LOOP, priv->mmio + RK3568_PHYREG18); + writel(RK3568_PHYREG11_SU_TRIM_0_7, priv->mmio + RK3568_PHYREG11); + + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_usb, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false); + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false); + rockchip_combphy_param_write(priv->phy_grf, &cfg->usb_mode_set, true); + switch (priv->id) { + case 0: + rockchip_combphy_param_write(priv->pipe_grf, &cfg->u3otg0_port_en, true); + break; + case 1: + rockchip_combphy_param_write(priv->pipe_grf, &cfg->u3otg1_port_en, true); + break; + } + break; + + case PHY_TYPE_SATA: + /* Enable adaptive CTLE for SATA Rx. */ + val = readl(priv->mmio + RK3568_PHYREG15); + val |= RK3568_PHYREG15_CTLE_EN; + writel(val, priv->mmio + RK3568_PHYREG15); + /* + * Set tx_rterm=50ohm and rx_rterm=44ohm for SATA. + * 0: 60ohm, 8: 50ohm 15: 44ohm (by step abort 1ohm) + */ + val = RK3568_PHYREG7_TX_RTERM_50OHM << RK3568_PHYREG7_TX_RTERM_SHIFT; + val |= RK3568_PHYREG7_RX_RTERM_44OHM << RK3568_PHYREG7_RX_RTERM_SHIFT; + writel(val, priv->mmio + RK3568_PHYREG7); + + rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_sata, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_sata, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_sata, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_sata, true); + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true); + break; + + case PHY_TYPE_SGMII: + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->sgmii_mode_set, true); + break; + + case PHY_TYPE_QSGMII: + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_rate_sel, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->qsgmii_mode_set, true); + break; + + default: + dev_err(priv->dev, "incompatible PHY type\n"); + return -EINVAL; + } + + rate = clk_get_rate(priv->refclk); + + switch (rate) { + case REF_CLOCK_24MHz: + if (priv->type == PHY_TYPE_USB3 || priv->type == PHY_TYPE_SATA) { + /* Set ssc_cnt[9:0]=0101111101 & 31.5KHz. */ + val = RK3568_PHYREG15_SSC_CNT_VALUE << RK3568_PHYREG15_SSC_CNT_SHIFT; + rockchip_combphy_updatel(priv, RK3568_PHYREG15_SSC_CNT_MASK, + val, RK3568_PHYREG15); + + writel(RK3568_PHYREG16_SSC_CNT_VALUE, priv->mmio + RK3568_PHYREG16); + } + break; + + case REF_CLOCK_25MHz: + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_25m, true); + break; + + case REF_CLOCK_100MHz: + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true); + if (priv->type == PHY_TYPE_PCIE) { + /* PLL KVCO fine tuning. */ + val = RK3568_PHYREG33_PLL_KVCO_VALUE << RK3568_PHYREG33_PLL_KVCO_SHIFT; + rockchip_combphy_updatel(priv, RK3568_PHYREG33_PLL_KVCO_MASK, + val, RK3568_PHYREG33); + + /* Enable controlling random jitter. */ + writel(RK3568_PHYREG12_PLL_LPF_ADJ_VALUE, priv->mmio + RK3568_PHYREG12); + + val = RK3568_PHYREG6_PLL_DIV_2 << RK3568_PHYREG6_PLL_DIV_SHIFT; + rockchip_combphy_updatel(priv, RK3568_PHYREG6_PLL_DIV_MASK, + val, RK3568_PHYREG6); + + writel(RK3568_PHYREG18_PLL_LOOP, priv->mmio + RK3568_PHYREG18); + writel(RK3568_PHYREG11_SU_TRIM_0_7, priv->mmio + RK3568_PHYREG11); + } else if (priv->type == PHY_TYPE_SATA) { + /* downward spread spectrum +500ppm */ + val = RK3568_PHYREG32_SSC_DOWNWARD << RK3568_PHYREG32_SSC_DIR_SHIFT; + val |= RK3568_PHYREG32_SSC_OFFSET_500PPM << + RK3568_PHYREG32_SSC_OFFSET_SHIFT; + rockchip_combphy_updatel(priv, RK3568_PHYREG32_SSC_MASK, val, + RK3568_PHYREG32); + } + break; + + default: + dev_err(priv->dev, "unsupported rate: %lu\n", rate); + return -EINVAL; + } + + if (priv->ext_refclk) { + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true); + if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) { + val = RK3568_PHYREG13_RESISTER_HIGH_Z << RK3568_PHYREG13_RESISTER_SHIFT; + val |= RK3568_PHYREG13_CKRCV_AMP0; + rockchip_combphy_updatel(priv, RK3568_PHYREG13_RESISTER_MASK, val, + RK3568_PHYREG13); + + val = readl(priv->mmio + RK3568_PHYREG14); + val |= RK3568_PHYREG14_CKRCV_AMP1; + writel(val, priv->mmio + RK3568_PHYREG14); + } + } + + if (priv->enable_ssc) { + val = readl(priv->mmio + RK3568_PHYREG8); + val |= RK3568_PHYREG8_SSC_EN; + writel(val, priv->mmio + RK3568_PHYREG8); + } + + return 0; +} + +static const struct rockchip_combphy_grfcfg rk3568_combphy_grfcfgs = { + /* pipe-phy-grf */ + .pcie_mode_set = { 0x0000, 5, 0, 0x00, 0x11 }, + .usb_mode_set = { 0x0000, 5, 0, 0x00, 0x04 }, + .sgmii_mode_set = { 0x0000, 5, 0, 0x00, 0x01 }, + .qsgmii_mode_set = { 0x0000, 5, 0, 0x00, 0x21 }, + .pipe_rxterm_set = { 0x0000, 12, 12, 0x00, 0x01 }, + .pipe_txelec_set = { 0x0004, 1, 1, 0x00, 0x01 }, + .pipe_txcomp_set = { 0x0004, 4, 4, 0x00, 0x01 }, + .pipe_clk_25m = { 0x0004, 14, 13, 0x00, 0x01 }, + .pipe_clk_100m = { 0x0004, 14, 13, 0x00, 0x02 }, + .pipe_phymode_sel = { 0x0008, 1, 1, 0x00, 0x01 }, + .pipe_rate_sel = { 0x0008, 2, 2, 0x00, 0x01 }, + .pipe_rxterm_sel = { 0x0008, 8, 8, 0x00, 0x01 }, + .pipe_txelec_sel = { 0x0008, 12, 12, 0x00, 0x01 }, + .pipe_txcomp_sel = { 0x0008, 15, 15, 0x00, 0x01 }, + .pipe_clk_ext = { 0x000c, 9, 8, 0x02, 0x01 }, + .pipe_sel_usb = { 0x000c, 14, 13, 0x00, 0x01 }, + .pipe_sel_qsgmii = { 0x000c, 15, 13, 0x00, 0x07 }, + .pipe_phy_status = { 0x0034, 6, 6, 0x01, 0x00 }, + .con0_for_pcie = { 0x0000, 15, 0, 0x00, 0x1000 }, + .con1_for_pcie = { 0x0004, 15, 0, 0x00, 0x0000 }, + .con2_for_pcie = { 0x0008, 15, 0, 0x00, 0x0101 }, + .con3_for_pcie = { 0x000c, 15, 0, 0x00, 0x0200 }, + .con0_for_sata = { 0x0000, 15, 0, 0x00, 0x0119 }, + .con1_for_sata = { 0x0004, 15, 0, 0x00, 0x0040 }, + .con2_for_sata = { 0x0008, 15, 0, 0x00, 0x80c3 }, + .con3_for_sata = { 0x000c, 15, 0, 0x00, 0x4407 }, + /* pipe-grf */ + .pipe_con0_for_sata = { 0x0000, 15, 0, 0x00, 0x2220 }, + .pipe_xpcs_phy_ready = { 0x0040, 2, 2, 0x00, 0x01 }, + .u3otg0_port_en = { 0x0104, 15, 0, 0x0181, 0x1100 }, + .u3otg1_port_en = { 0x0144, 15, 0, 0x0181, 0x1100 }, +}; + +static const struct rockchip_combphy_cfg rk3568_combphy_cfgs = { + .num_phys = 3, + .phy_ids = { + 0xfe820000, + 0xfe830000, + 0xfe840000, + }, + .grfcfg = &rk3568_combphy_grfcfgs, + .combphy_cfg = rk3568_combphy_cfg, +}; + +static int rk3576_combphy_cfg(struct rockchip_combphy_priv *priv) +{ + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; + unsigned long rate; + u32 val; + + switch (priv->type) { + case PHY_TYPE_PCIE: + /* Set SSC downward spread spectrum */ + val = FIELD_PREP(RK3568_PHYREG32_SSC_MASK, RK3568_PHYREG32_SSC_DOWNWARD); + rockchip_combphy_updatel(priv, RK3568_PHYREG32_SSC_MASK, val, RK3568_PHYREG32); + + rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_pcie, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_pcie, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_pcie, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_pcie, true); + break; + + case PHY_TYPE_USB3: + /* Set SSC downward spread spectrum */ + val = FIELD_PREP(RK3568_PHYREG32_SSC_MASK, RK3568_PHYREG32_SSC_DOWNWARD); + rockchip_combphy_updatel(priv, RK3568_PHYREG32_SSC_MASK, val, RK3568_PHYREG32); + + /* Enable adaptive CTLE for USB3.0 Rx */ + val = readl(priv->mmio + RK3568_PHYREG15); + val |= RK3568_PHYREG15_CTLE_EN; + writel(val, priv->mmio + RK3568_PHYREG15); + + /* Set PLL KVCO fine tuning signals */ + rockchip_combphy_updatel(priv, RK3568_PHYREG33_PLL_KVCO_MASK, BIT(3), + RK3568_PHYREG33); + + /* Set PLL LPF R1 to su_trim[10:7]=1001 */ + writel(RK3568_PHYREG12_PLL_LPF_ADJ_VALUE, priv->mmio + RK3568_PHYREG12); + + /* Set PLL input clock divider 1/2 */ + val = FIELD_PREP(RK3568_PHYREG6_PLL_DIV_MASK, RK3568_PHYREG6_PLL_DIV_2); + rockchip_combphy_updatel(priv, RK3568_PHYREG6_PLL_DIV_MASK, val, RK3568_PHYREG6); + + /* Set PLL loop divider */ + writel(RK3568_PHYREG18_PLL_LOOP, priv->mmio + RK3568_PHYREG18); + + /* Set PLL KVCO to min and set PLL charge pump current to max */ + writel(RK3568_PHYREG11_SU_TRIM_0_7, priv->mmio + RK3568_PHYREG11); + + /* Set Rx squelch input filler bandwidth */ + writel(RK3576_PHYREG21_RX_SQUELCH_VAL, priv->mmio + RK3576_PHYREG21); + + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false); + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false); + rockchip_combphy_param_write(priv->phy_grf, &cfg->usb_mode_set, true); + break; + + case PHY_TYPE_SATA: + /* Enable adaptive CTLE for SATA Rx */ + val = readl(priv->mmio + RK3568_PHYREG15); + val |= RK3568_PHYREG15_CTLE_EN; + writel(val, priv->mmio + RK3568_PHYREG15); + + /* Set tx_rterm = 50 ohm and rx_rterm = 43.5 ohm */ + val = RK3568_PHYREG7_TX_RTERM_50OHM << RK3568_PHYREG7_TX_RTERM_SHIFT; + val |= RK3568_PHYREG7_RX_RTERM_44OHM << RK3568_PHYREG7_RX_RTERM_SHIFT; + writel(val, priv->mmio + RK3568_PHYREG7); + + rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_sata, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_sata, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_sata, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_sata, true); + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true); + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con1_for_sata, true); + break; + + default: + dev_err(priv->dev, "incompatible PHY type\n"); + return -EINVAL; + } + + rate = clk_get_rate(priv->refclk); + + switch (rate) { + case REF_CLOCK_24MHz: + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_24m, true); + if (priv->type == PHY_TYPE_USB3 || priv->type == PHY_TYPE_SATA) { + /* Set ssc_cnt[9:0]=0101111101 & 31.5KHz */ + val = FIELD_PREP(RK3568_PHYREG15_SSC_CNT_MASK, + RK3568_PHYREG15_SSC_CNT_VALUE); + rockchip_combphy_updatel(priv, RK3568_PHYREG15_SSC_CNT_MASK, + val, RK3568_PHYREG15); + + writel(RK3568_PHYREG16_SSC_CNT_VALUE, priv->mmio + RK3568_PHYREG16); + } else if (priv->type == PHY_TYPE_PCIE) { + /* PLL KVCO tuning fine */ + val = FIELD_PREP(RK3568_PHYREG33_PLL_KVCO_MASK, + RK3576_PHYREG33_PLL_KVCO_VALUE); + rockchip_combphy_updatel(priv, RK3568_PHYREG33_PLL_KVCO_MASK, + val, RK3568_PHYREG33); + + /* Set up rx_pck invert and rx msb to disable */ + writel(0x00, priv->mmio + RK3588_PHYREG27); + + /* + * Set up SU adjust signal: + * su_trim[7:0], PLL KVCO adjust bits[2:0] to min + * su_trim[15:8], PLL LPF R1 adujst bits[9:7]=3'b011 + * su_trim[31:24], CKDRV adjust + */ + writel(0x90, priv->mmio + RK3568_PHYREG11); + writel(0x02, priv->mmio + RK3568_PHYREG12); + writel(0x57, priv->mmio + RK3568_PHYREG14); + + writel(RK3568_PHYREG16_SSC_CNT_VALUE, priv->mmio + RK3568_PHYREG16); + } + break; + + case REF_CLOCK_25MHz: + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_25m, true); + break; + + case REF_CLOCK_100MHz: + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true); + if (priv->type == PHY_TYPE_PCIE) { + /* gate_tx_pck_sel length select work for L1SS */ + writel(0xc0, priv->mmio + RK3576_PHYREG30); + + /* PLL KVCO tuning fine */ + val = FIELD_PREP(RK3568_PHYREG33_PLL_KVCO_MASK, + RK3576_PHYREG33_PLL_KVCO_VALUE); + rockchip_combphy_updatel(priv, RK3568_PHYREG33_PLL_KVCO_MASK, + val, RK3568_PHYREG33); + + /* Set up rx_trim: PLL LPF C1 85pf R1 1.25kohm */ + writel(0x4c, priv->mmio + RK3588_PHYREG27); + + /* + * Set up SU adjust signal: + * su_trim[7:0], PLL KVCO adjust bits[2:0] to min + * su_trim[15:8], bypass PLL loop divider code, and + * PLL LPF R1 adujst bits[9:7]=3'b101 + * su_trim[23:16], CKRCV adjust + * su_trim[31:24], CKDRV adjust + */ + writel(0x90, priv->mmio + RK3568_PHYREG11); + writel(0x43, priv->mmio + RK3568_PHYREG12); + writel(0x88, priv->mmio + RK3568_PHYREG13); + writel(0x56, priv->mmio + RK3568_PHYREG14); + } else if (priv->type == PHY_TYPE_SATA) { + /* downward spread spectrum +500ppm */ + val = FIELD_PREP(RK3568_PHYREG32_SSC_DIR_MASK, + RK3568_PHYREG32_SSC_DOWNWARD); + val |= FIELD_PREP(RK3568_PHYREG32_SSC_OFFSET_MASK, + RK3568_PHYREG32_SSC_OFFSET_500PPM); + rockchip_combphy_updatel(priv, RK3568_PHYREG32_SSC_MASK, val, + RK3568_PHYREG32); + + /* ssc ppm adjust to 3500ppm */ + rockchip_combphy_updatel(priv, RK3576_PHYREG10_SSC_PCM_MASK, + RK3576_PHYREG10_SSC_PCM_3500PPM, + RK3576_PHYREG10); + } + break; + + default: + dev_err(priv->dev, "Unsupported rate: %lu\n", rate); + return -EINVAL; + } + + if (priv->ext_refclk) { + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true); + if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) { + val = FIELD_PREP(RK3568_PHYREG33_PLL_KVCO_MASK, + RK3576_PHYREG33_PLL_KVCO_VALUE); + rockchip_combphy_updatel(priv, RK3568_PHYREG33_PLL_KVCO_MASK, + val, RK3568_PHYREG33); + + /* Set up rx_trim: PLL LPF C1 85pf R1 2.5kohm */ + writel(0x0c, priv->mmio + RK3588_PHYREG27); + + /* + * Set up SU adjust signal: + * su_trim[7:0], PLL KVCO adjust bits[2:0] to min + * su_trim[15:8], bypass PLL loop divider code, and + * PLL LPF R1 adujst bits[9:7]=3'b101. + * su_trim[23:16], CKRCV adjust + * su_trim[31:24], CKDRV adjust + */ + writel(0x90, priv->mmio + RK3568_PHYREG11); + writel(0x43, priv->mmio + RK3568_PHYREG12); + writel(0x88, priv->mmio + RK3568_PHYREG13); + writel(0x56, priv->mmio + RK3568_PHYREG14); + } + } + + if (priv->enable_ssc) { + val = readl(priv->mmio + RK3568_PHYREG8); + val |= RK3568_PHYREG8_SSC_EN; + writel(val, priv->mmio + RK3568_PHYREG8); + + if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_24MHz) { + /* Set PLL loop divider */ + writel(0x00, priv->mmio + RK3576_PHYREG17); + writel(RK3568_PHYREG18_PLL_LOOP, priv->mmio + RK3568_PHYREG18); + + /* Set up rx_pck invert and rx msb to disable */ + writel(0x00, priv->mmio + RK3588_PHYREG27); + + /* + * Set up SU adjust signal: + * su_trim[7:0], PLL KVCO adjust bits[2:0] to min + * su_trim[15:8], PLL LPF R1 adujst bits[9:7]=3'b101 + * su_trim[23:16], CKRCV adjust + * su_trim[31:24], CKDRV adjust + */ + writel(0x90, priv->mmio + RK3568_PHYREG11); + writel(0x02, priv->mmio + RK3568_PHYREG12); + writel(0x08, priv->mmio + RK3568_PHYREG13); + writel(0x57, priv->mmio + RK3568_PHYREG14); + writel(0x40, priv->mmio + RK3568_PHYREG15); + + writel(RK3568_PHYREG16_SSC_CNT_VALUE, priv->mmio + RK3568_PHYREG16); + + val = FIELD_PREP(RK3568_PHYREG33_PLL_KVCO_MASK, + RK3576_PHYREG33_PLL_KVCO_VALUE); + writel(val, priv->mmio + RK3568_PHYREG33); + } + } + + return 0; +} + +static const struct rockchip_combphy_grfcfg rk3576_combphy_grfcfgs = { + /* pipe-phy-grf */ + .pcie_mode_set = { 0x0000, 5, 0, 0x00, 0x11 }, + .usb_mode_set = { 0x0000, 5, 0, 0x00, 0x04 }, + .pipe_rxterm_set = { 0x0000, 12, 12, 0x00, 0x01 }, + .pipe_txelec_set = { 0x0004, 1, 1, 0x00, 0x01 }, + .pipe_txcomp_set = { 0x0004, 4, 4, 0x00, 0x01 }, + .pipe_clk_24m = { 0x0004, 14, 13, 0x00, 0x00 }, + .pipe_clk_25m = { 0x0004, 14, 13, 0x00, 0x01 }, + .pipe_clk_100m = { 0x0004, 14, 13, 0x00, 0x02 }, + .pipe_phymode_sel = { 0x0008, 1, 1, 0x00, 0x01 }, + .pipe_rate_sel = { 0x0008, 2, 2, 0x00, 0x01 }, + .pipe_rxterm_sel = { 0x0008, 8, 8, 0x00, 0x01 }, + .pipe_txelec_sel = { 0x0008, 12, 12, 0x00, 0x01 }, + .pipe_txcomp_sel = { 0x0008, 15, 15, 0x00, 0x01 }, + .pipe_clk_ext = { 0x000c, 9, 8, 0x02, 0x01 }, + .pipe_phy_status = { 0x0034, 6, 6, 0x01, 0x00 }, + .con0_for_pcie = { 0x0000, 15, 0, 0x00, 0x1000 }, + .con1_for_pcie = { 0x0004, 15, 0, 0x00, 0x0000 }, + .con2_for_pcie = { 0x0008, 15, 0, 0x00, 0x0101 }, + .con3_for_pcie = { 0x000c, 15, 0, 0x00, 0x0200 }, + .con0_for_sata = { 0x0000, 15, 0, 0x00, 0x0129 }, + .con1_for_sata = { 0x0004, 15, 0, 0x00, 0x0000 }, + .con2_for_sata = { 0x0008, 15, 0, 0x00, 0x80c1 }, + .con3_for_sata = { 0x000c, 15, 0, 0x00, 0x0407 }, + /* php-grf */ + .pipe_con0_for_sata = { 0x001C, 2, 0, 0x00, 0x2 }, + .pipe_con1_for_sata = { 0x0020, 2, 0, 0x00, 0x2 }, +}; + +static const struct rockchip_combphy_cfg rk3576_combphy_cfgs = { + .num_phys = 2, + .phy_ids = { + 0x2b050000, + 0x2b060000 + }, + .grfcfg = &rk3576_combphy_grfcfgs, + .combphy_cfg = rk3576_combphy_cfg, +}; + +static int rk3588_combphy_cfg(struct rockchip_combphy_priv *priv) +{ + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; + unsigned long rate; + u32 val; + + switch (priv->type) { + case PHY_TYPE_PCIE: + rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_pcie, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_pcie, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_pcie, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_pcie, true); + switch (priv->id) { + case 1: + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_pcie1l0_sel, true); + break; + case 2: + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_pcie1l1_sel, true); + break; + } + break; + case PHY_TYPE_USB3: + /* Set SSC downward spread spectrum */ + val = RK3568_PHYREG32_SSC_DOWNWARD << RK3568_PHYREG32_SSC_DIR_SHIFT; + rockchip_combphy_updatel(priv, RK3568_PHYREG32_SSC_MASK, val, RK3568_PHYREG32); + + /* Enable adaptive CTLE for USB3.0 Rx. */ + val = readl(priv->mmio + RK3568_PHYREG15); + val |= RK3568_PHYREG15_CTLE_EN; + writel(val, priv->mmio + RK3568_PHYREG15); + + /* Set PLL KVCO fine tuning signals. */ + val = RK3568_PHYREG33_PLL_KVCO_VALUE << RK3568_PHYREG33_PLL_KVCO_SHIFT; + rockchip_combphy_updatel(priv, RK3568_PHYREG33_PLL_KVCO_MASK, val, RK3568_PHYREG33); + + /* Enable controlling random jitter. */ + writel(RK3568_PHYREG12_PLL_LPF_ADJ_VALUE, priv->mmio + RK3568_PHYREG12); + + /* Set PLL input clock divider 1/2. */ + rockchip_combphy_updatel(priv, RK3568_PHYREG6_PLL_DIV_MASK, + RK3568_PHYREG6_PLL_DIV_2 << RK3568_PHYREG6_PLL_DIV_SHIFT, + RK3568_PHYREG6); + + writel(RK3568_PHYREG18_PLL_LOOP, priv->mmio + RK3568_PHYREG18); + writel(RK3568_PHYREG11_SU_TRIM_0_7, priv->mmio + RK3568_PHYREG11); + + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false); + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false); + rockchip_combphy_param_write(priv->phy_grf, &cfg->usb_mode_set, true); + break; + case PHY_TYPE_SATA: + /* Enable adaptive CTLE for SATA Rx. */ + val = readl(priv->mmio + RK3568_PHYREG15); + val |= RK3568_PHYREG15_CTLE_EN; + writel(val, priv->mmio + RK3568_PHYREG15); + /* + * Set tx_rterm=50ohm and rx_rterm=44ohm for SATA. + * 0: 60ohm, 8: 50ohm 15: 44ohm (by step abort 1ohm) + */ + val = RK3568_PHYREG7_TX_RTERM_50OHM << RK3568_PHYREG7_TX_RTERM_SHIFT; + val |= RK3568_PHYREG7_RX_RTERM_44OHM << RK3568_PHYREG7_RX_RTERM_SHIFT; + writel(val, priv->mmio + RK3568_PHYREG7); + + rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_sata, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_sata, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_sata, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_sata, true); + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true); + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con1_for_sata, true); + break; + case PHY_TYPE_SGMII: + case PHY_TYPE_QSGMII: + default: + dev_err(priv->dev, "incompatible PHY type\n"); + return -EINVAL; + } + + rate = clk_get_rate(priv->refclk); + + switch (rate) { + case REF_CLOCK_24MHz: + if (priv->type == PHY_TYPE_USB3 || priv->type == PHY_TYPE_SATA) { + /* Set ssc_cnt[9:0]=0101111101 & 31.5KHz. */ + val = RK3568_PHYREG15_SSC_CNT_VALUE << RK3568_PHYREG15_SSC_CNT_SHIFT; + rockchip_combphy_updatel(priv, RK3568_PHYREG15_SSC_CNT_MASK, + val, RK3568_PHYREG15); + + writel(RK3568_PHYREG16_SSC_CNT_VALUE, priv->mmio + RK3568_PHYREG16); + } + break; + + case REF_CLOCK_25MHz: + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_25m, true); + break; + case REF_CLOCK_100MHz: + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true); + if (priv->type == PHY_TYPE_PCIE) { + /* PLL KVCO fine tuning. */ + val = 4 << RK3568_PHYREG33_PLL_KVCO_SHIFT; + rockchip_combphy_updatel(priv, RK3568_PHYREG33_PLL_KVCO_MASK, + val, RK3568_PHYREG33); + + /* Enable controlling random jitter. */ + writel(RK3568_PHYREG12_PLL_LPF_ADJ_VALUE, priv->mmio + RK3568_PHYREG12); + + /* Set up rx_trim: PLL LPF C1 85pf R1 1.25kohm */ + writel(RK3588_PHYREG27_RX_TRIM, priv->mmio + RK3588_PHYREG27); + + /* Set up su_trim: */ + writel(RK3568_PHYREG11_SU_TRIM_0_7, priv->mmio + RK3568_PHYREG11); + } else if (priv->type == PHY_TYPE_SATA) { + /* downward spread spectrum +500ppm */ + val = RK3568_PHYREG32_SSC_DOWNWARD << RK3568_PHYREG32_SSC_DIR_SHIFT; + val |= RK3568_PHYREG32_SSC_OFFSET_500PPM << + RK3568_PHYREG32_SSC_OFFSET_SHIFT; + rockchip_combphy_updatel(priv, RK3568_PHYREG32_SSC_MASK, val, + RK3568_PHYREG32); + } + break; + default: + dev_err(priv->dev, "Unsupported rate: %lu\n", rate); + return -EINVAL; + } + + if (priv->ext_refclk) { + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true); + if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) { + val = RK3568_PHYREG13_RESISTER_HIGH_Z << RK3568_PHYREG13_RESISTER_SHIFT; + val |= RK3568_PHYREG13_CKRCV_AMP0; + rockchip_combphy_updatel(priv, RK3568_PHYREG13_RESISTER_MASK, val, + RK3568_PHYREG13); + + val = readl(priv->mmio + RK3568_PHYREG14); + val |= RK3568_PHYREG14_CKRCV_AMP1; + writel(val, priv->mmio + RK3568_PHYREG14); + } + } + + if (priv->enable_ssc) { + val = readl(priv->mmio + RK3568_PHYREG8); + val |= RK3568_PHYREG8_SSC_EN; + writel(val, priv->mmio + RK3568_PHYREG8); + } + + return 0; +} + +static const struct rockchip_combphy_grfcfg rk3588_combphy_grfcfgs = { + /* pipe-phy-grf */ + .pcie_mode_set = { 0x0000, 5, 0, 0x00, 0x11 }, + .usb_mode_set = { 0x0000, 5, 0, 0x00, 0x04 }, + .pipe_rxterm_set = { 0x0000, 12, 12, 0x00, 0x01 }, + .pipe_txelec_set = { 0x0004, 1, 1, 0x00, 0x01 }, + .pipe_txcomp_set = { 0x0004, 4, 4, 0x00, 0x01 }, + .pipe_clk_25m = { 0x0004, 14, 13, 0x00, 0x01 }, + .pipe_clk_100m = { 0x0004, 14, 13, 0x00, 0x02 }, + .pipe_rxterm_sel = { 0x0008, 8, 8, 0x00, 0x01 }, + .pipe_txelec_sel = { 0x0008, 12, 12, 0x00, 0x01 }, + .pipe_txcomp_sel = { 0x0008, 15, 15, 0x00, 0x01 }, + .pipe_clk_ext = { 0x000c, 9, 8, 0x02, 0x01 }, + .pipe_phy_status = { 0x0034, 6, 6, 0x01, 0x00 }, + .con0_for_pcie = { 0x0000, 15, 0, 0x00, 0x1000 }, + .con1_for_pcie = { 0x0004, 15, 0, 0x00, 0x0000 }, + .con2_for_pcie = { 0x0008, 15, 0, 0x00, 0x0101 }, + .con3_for_pcie = { 0x000c, 15, 0, 0x00, 0x0200 }, + .con0_for_sata = { 0x0000, 15, 0, 0x00, 0x0129 }, + .con1_for_sata = { 0x0004, 15, 0, 0x00, 0x0000 }, + .con2_for_sata = { 0x0008, 15, 0, 0x00, 0x80c1 }, + .con3_for_sata = { 0x000c, 15, 0, 0x00, 0x0407 }, + /* pipe-grf */ + .pipe_con0_for_sata = { 0x0000, 11, 5, 0x00, 0x22 }, + .pipe_con1_for_sata = { 0x0000, 2, 0, 0x00, 0x2 }, + .pipe_pcie1l0_sel = { 0x0100, 0, 0, 0x01, 0x0 }, + .pipe_pcie1l1_sel = { 0x0100, 1, 1, 0x01, 0x0 }, +}; + +static const struct rockchip_combphy_cfg rk3588_combphy_cfgs = { + .num_phys = 3, + .phy_ids = { + 0xfee00000, + 0xfee10000, + 0xfee20000, + }, + .grfcfg = &rk3588_combphy_grfcfgs, + .combphy_cfg = rk3588_combphy_cfg, +}; + +static const struct of_device_id rockchip_combphy_of_match[] = { + { + .compatible = "rockchip,rk3528-naneng-combphy", + .data = &rk3528_combphy_cfgs, + }, + { + .compatible = "rockchip,rk3562-naneng-combphy", + .data = &rk3562_combphy_cfgs, + }, + { + .compatible = "rockchip,rk3568-naneng-combphy", + .data = &rk3568_combphy_cfgs, + }, + { + .compatible = "rockchip,rk3576-naneng-combphy", + .data = &rk3576_combphy_cfgs, + }, + { + .compatible = "rockchip,rk3588-naneng-combphy", + .data = &rk3588_combphy_cfgs, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, rockchip_combphy_of_match); + +static struct platform_driver rockchip_combphy_driver = { + .probe = rockchip_combphy_probe, + .driver = { + .name = "rockchip-naneng-combphy", + .of_match_table = rockchip_combphy_of_match, + }, +}; +module_platform_driver(rockchip_combphy_driver); + +MODULE_DESCRIPTION("Rockchip NANENG COMBPHY driver"); +MODULE_LICENSE("GPL v2"); |