diff options
Diffstat (limited to 'drivers/phy/samsung/phy-exynos5-usbdrd.c')
| -rw-r--r-- | drivers/phy/samsung/phy-exynos5-usbdrd.c | 863 |
1 files changed, 736 insertions, 127 deletions
diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c index c421b495eb0f..1c8bf80119f1 100644 --- a/drivers/phy/samsung/phy-exynos5-usbdrd.c +++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c @@ -23,6 +23,8 @@ #include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <linux/soc/samsung/exynos-regs-pmu.h> +#include <linux/usb/typec.h> +#include <linux/usb/typec_mux.h> /* Exynos USB PHY registers */ #define EXYNOS5_FSEL_9MHZ6 0x0 @@ -34,14 +36,40 @@ #define EXYNOS5_FSEL_26MHZ 0x6 #define EXYNOS5_FSEL_50MHZ 0x7 +/* USB 3.2 DRD 4nm PHY link controller registers */ +#define EXYNOS2200_DRD_CLKRST 0x0c +#define EXYNOS2200_CLKRST_LINK_PCLK_SEL BIT(1) + +#define EXYNOS2200_DRD_UTMI 0x10 +#define EXYNOS2200_UTMI_FORCE_VBUSVALID BIT(1) +#define EXYNOS2200_UTMI_FORCE_BVALID BIT(0) + +#define EXYNOS2200_DRD_HSP_MISC 0x114 +#define HSP_MISC_SET_REQ_IN2 BIT(4) +#define HSP_MISC_RES_TUNE GENMASK(1, 0) +#define RES_TUNE_PHY1_PHY2 0x1 +#define RES_TUNE_PHY1 0x2 +#define RES_TUNE_PHY2 0x3 + /* Exynos5: USB 3.0 DRD PHY registers */ #define EXYNOS5_DRD_LINKSYSTEM 0x04 #define LINKSYSTEM_XHCI_VERSION_CONTROL BIT(27) -#define LINKSYSTEM_FLADJ_MASK (0x3f << 1) -#define LINKSYSTEM_FLADJ(_x) ((_x) << 1) +#define LINKSYSTEM_FORCE_VBUSVALID BIT(8) +#define LINKSYSTEM_FORCE_BVALID BIT(7) +#define LINKSYSTEM_FLADJ GENMASK(6, 1) #define EXYNOS5_DRD_PHYUTMI 0x08 +#define PHYUTMI_UTMI_SUSPEND_COM_N BIT(12) +#define PHYUTMI_UTMI_L1_SUSPEND_COM_N BIT(11) +#define PHYUTMI_VBUSVLDEXTSEL BIT(10) +#define PHYUTMI_VBUSVLDEXT BIT(9) +#define PHYUTMI_TXBITSTUFFENH BIT(8) +#define PHYUTMI_TXBITSTUFFEN BIT(7) #define PHYUTMI_OTGDISABLE BIT(6) +#define PHYUTMI_IDPULLUP BIT(5) +#define PHYUTMI_DRVVBUS BIT(4) +#define PHYUTMI_DPPULLDOWN BIT(3) +#define PHYUTMI_DMPULLDOWN BIT(2) #define PHYUTMI_FORCESUSPEND BIT(1) #define PHYUTMI_FORCESLEEP BIT(0) @@ -49,30 +77,27 @@ #define EXYNOS5_DRD_PHYCLKRST 0x10 #define PHYCLKRST_EN_UTMISUSPEND BIT(31) -#define PHYCLKRST_SSC_REFCLKSEL_MASK (0xff << 23) -#define PHYCLKRST_SSC_REFCLKSEL(_x) ((_x) << 23) -#define PHYCLKRST_SSC_RANGE_MASK (0x03 << 21) -#define PHYCLKRST_SSC_RANGE(_x) ((_x) << 21) +#define PHYCLKRST_SSC_REFCLKSEL GENMASK(30, 23) +#define PHYCLKRST_SSC_RANGE GENMASK(22, 21) #define PHYCLKRST_SSC_EN BIT(20) #define PHYCLKRST_REF_SSP_EN BIT(19) #define PHYCLKRST_REF_CLKDIV2 BIT(18) -#define PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11) -#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF (0x19 << 11) -#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF (0x32 << 11) -#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF (0x68 << 11) -#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF (0x7d << 11) -#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF (0x02 << 11) -#define PHYCLKRST_FSEL_PIPE_MASK (0x7 << 8) -#define PHYCLKRST_FSEL_UTMI_MASK (0x7 << 5) -#define PHYCLKRST_FSEL(_x) ((_x) << 5) -#define PHYCLKRST_FSEL_PAD_100MHZ (0x27 << 5) -#define PHYCLKRST_FSEL_PAD_24MHZ (0x2a << 5) -#define PHYCLKRST_FSEL_PAD_20MHZ (0x31 << 5) -#define PHYCLKRST_FSEL_PAD_19_2MHZ (0x38 << 5) +#define PHYCLKRST_MPLL_MULTIPLIER GENMASK(17, 11) +#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF 0x19 +#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF 0x32 +#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF 0x68 +#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF 0x7d +#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF 0x02 +#define PHYCLKRST_FSEL_PIPE GENMASK(10, 8) +#define PHYCLKRST_FSEL_UTMI GENMASK(7, 5) +#define PHYCLKRST_FSEL_PAD_100MHZ 0x27 +#define PHYCLKRST_FSEL_PAD_24MHZ 0x2a +#define PHYCLKRST_FSEL_PAD_20MHZ 0x31 +#define PHYCLKRST_FSEL_PAD_19_2MHZ 0x38 #define PHYCLKRST_RETENABLEN BIT(4) -#define PHYCLKRST_REFCLKSEL_MASK (0x03 << 2) -#define PHYCLKRST_REFCLKSEL_PAD_REFCLK (0x2 << 2) -#define PHYCLKRST_REFCLKSEL_EXT_REFCLK (0x3 << 2) +#define PHYCLKRST_REFCLKSEL GENMASK(3, 2) +#define PHYCLKRST_REFCLKSEL_PAD_REFCLK 0x2 +#define PHYCLKRST_REFCLKSEL_EXT_REFCLK 0x3 #define PHYCLKRST_PORTRESET BIT(1) #define PHYCLKRST_COMMONONN BIT(0) @@ -81,22 +106,32 @@ #define PHYREG0_SSC_RANGE BIT(20) #define PHYREG0_CR_WRITE BIT(19) #define PHYREG0_CR_READ BIT(18) -#define PHYREG0_CR_DATA_IN(_x) ((_x) << 2) +#define PHYREG0_CR_DATA_IN GENMASK(17, 2) #define PHYREG0_CR_CAP_DATA BIT(1) #define PHYREG0_CR_CAP_ADDR BIT(0) #define EXYNOS5_DRD_PHYREG1 0x18 -#define PHYREG1_CR_DATA_OUT(_x) ((_x) << 1) +#define PHYREG0_CR_DATA_OUT GENMASK(16, 1) #define PHYREG1_CR_ACK BIT(0) #define EXYNOS5_DRD_PHYPARAM0 0x1c #define PHYPARAM0_REF_USE_PAD BIT(31) -#define PHYPARAM0_REF_LOSLEVEL_MASK (0x1f << 26) -#define PHYPARAM0_REF_LOSLEVEL (0x9 << 26) +#define PHYPARAM0_REF_LOSLEVEL GENMASK(30, 26) +#define PHYPARAM0_REF_LOSLEVEL_VAL 0x9 +#define PHYPARAM0_TXVREFTUNE GENMASK(25, 22) +#define PHYPARAM0_TXRISETUNE GENMASK(21, 20) +#define PHYPARAM0_TXRESTUNE GENMASK(19, 18) +#define PHYPARAM0_TXPREEMPPULSETUNE BIT(17) +#define PHYPARAM0_TXPREEMPAMPTUNE GENMASK(16, 15) +#define PHYPARAM0_TXHSXVTUNE GENMASK(14, 13) +#define PHYPARAM0_TXFSLSTUNE GENMASK(12, 9) +#define PHYPARAM0_SQRXTUNE GENMASK(8, 6) +#define PHYPARAM0_OTGTUNE GENMASK(5, 3) +#define PHYPARAM0_COMPDISTUNE GENMASK(2, 0) #define EXYNOS5_DRD_PHYPARAM1 0x20 -#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0) -#define PHYPARAM1_PCS_TXDEEMPH (0x1c) +#define PHYPARAM1_PCS_TXDEEMPH GENMASK(4, 0) +#define PHYPARAM1_PCS_TXDEEMPH_VAL 0x1c #define EXYNOS5_DRD_PHYTERM 0x24 @@ -112,6 +147,12 @@ #define EXYNOS5_DRD_PHYRESUME 0x34 #define EXYNOS5_DRD_LINKPORT 0x44 +#define LINKPORT_HOST_U3_PORT_DISABLE BIT(8) +#define LINKPORT_HOST_U2_PORT_DISABLE BIT(7) +#define LINKPORT_HOST_PORT_OVCR_U3 BIT(5) +#define LINKPORT_HOST_PORT_OVCR_U2 BIT(4) +#define LINKPORT_HOST_PORT_OVCR_U3_SEL BIT(3) +#define LINKPORT_HOST_PORT_OVCR_U2_SEL BIT(2) /* USB 3.0 DRD PHY SS Function Control Reg; accessed by CR_PORT */ #define EXYNOS5_DRD_PHYSS_LOSLEVEL_OVRD_IN (0x15) @@ -132,13 +173,31 @@ #define LANE0_TX_DEBUG_RXDET_MEAS_TIME_62M5 (0x20 << 4) #define LANE0_TX_DEBUG_RXDET_MEAS_TIME_96M_100M (0x40 << 4) +/* Exynos7870: USB DRD PHY registers */ +#define EXYNOS7870_DRD_PHYPCSVAL 0x3C +#define PHYPCSVAL_PCS_RX_LOS_MASK GENMASK(9, 0) + +#define EXYNOS7870_DRD_PHYPARAM2 0x50 +#define PHYPARAM2_TX_VBOOST_LVL GENMASK(6, 4) +#define PHYPARAM2_LOS_BIAS GENMASK(2, 0) + +#define EXYNOS7870_DRD_HSPHYCTRL 0x54 +#define HSPHYCTRL_PHYSWRSTALL BIT(31) +#define HSPHYCTRL_SIDDQ BIT(6) +#define HSPHYCTRL_PHYSWRST BIT(0) + +#define EXYNOS7870_DRD_HSPHYPLLTUNE 0x70 +#define HSPHYPLLTUNE_PLL_B_TUNE BIT(6) +#define HSPHYPLLTUNE_PLL_I_TUNE GENMASK(5, 4) +#define HSPHYPLLTUNE_PLL_P_TUNE GENMASK(3, 0) + /* Exynos850: USB DRD PHY registers */ #define EXYNOS850_DRD_LINKCTRL 0x04 #define LINKCTRL_FORCE_RXELECIDLE BIT(18) #define LINKCTRL_FORCE_PHYSTATUS BIT(17) #define LINKCTRL_FORCE_PIPE_EN BIT(16) #define LINKCTRL_FORCE_QACT BIT(8) -#define LINKCTRL_BUS_FILTER_BYPASS(_x) ((_x) << 4) +#define LINKCTRL_BUS_FILTER_BYPASS GENMASK(7, 4) #define EXYNOS850_DRD_LINKPORT 0x08 #define LINKPORT_HOST_NUM_U3 GENMASK(19, 16) @@ -209,6 +268,10 @@ #define EXYNOS9_PMA_USBDP_CMN_REG00B8 0x02e0 #define CMN_REG00B8_LANE_MUX_SEL_DP GENMASK(3, 0) +#define CMN_REG00B8_LANE_MUX_SEL_DP_LANE3 BIT(3) +#define CMN_REG00B8_LANE_MUX_SEL_DP_LANE2 BIT(2) +#define CMN_REG00B8_LANE_MUX_SEL_DP_LANE1 BIT(1) +#define CMN_REG00B8_LANE_MUX_SEL_DP_LANE0 BIT(0) #define EXYNOS9_PMA_USBDP_CMN_REG01C0 0x0700 #define CMN_REG01C0_ANA_LCPLL_LOCK_DONE BIT(7) @@ -383,11 +446,15 @@ struct exynos5_usbdrd_phy_drvdata { * @clks: clocks for register access * @core_clks: core clocks for phy (ref, pipe3, utmi+, ITP, etc. as required) * @drv_data: pointer to SoC level driver data structure + * @hs_phy: pointer to non-Samsung IP high-speed phy controller + * @phy_mutex: mutex protecting phy_init/exit & TCPC callbacks * @phys: array for 'EXYNOS5_DRDPHYS_NUM' number of PHY * instances each with its 'phy' and 'phy_cfg'. * @extrefclk: frequency select settings when using 'separate * reference clocks' for SS and HS operations * @regulators: regulators for phy + * @sw: TypeC orientation switch handle + * @orientation: TypeC connector orientation - normal or flipped */ struct exynos5_usbdrd_phy { struct device *dev; @@ -397,6 +464,8 @@ struct exynos5_usbdrd_phy { struct clk_bulk_data *clks; struct clk_bulk_data *core_clks; const struct exynos5_usbdrd_phy_drvdata *drv_data; + struct phy *hs_phy; + struct mutex phy_mutex; struct phy_usb_instance { struct phy *phy; u32 index; @@ -406,6 +475,9 @@ struct exynos5_usbdrd_phy { } phys[EXYNOS5_DRDPHYS_NUM]; u32 extrefclk; struct regulator_bulk_data *regulators; + + struct typec_switch_dev *sw; + enum typec_orientation orientation; }; static inline @@ -484,29 +556,33 @@ exynos5_usbdrd_pipe3_set_refclk(struct phy_usb_instance *inst) reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); /* Use EXTREFCLK as ref clock */ - reg &= ~PHYCLKRST_REFCLKSEL_MASK; - reg |= PHYCLKRST_REFCLKSEL_EXT_REFCLK; + reg &= ~PHYCLKRST_REFCLKSEL; + reg |= FIELD_PREP(PHYCLKRST_REFCLKSEL, PHYCLKRST_REFCLKSEL_EXT_REFCLK); /* FSEL settings corresponding to reference clock */ - reg &= ~PHYCLKRST_FSEL_PIPE_MASK | - PHYCLKRST_MPLL_MULTIPLIER_MASK | - PHYCLKRST_SSC_REFCLKSEL_MASK; + reg &= ~(PHYCLKRST_FSEL_PIPE | + PHYCLKRST_MPLL_MULTIPLIER | + PHYCLKRST_SSC_REFCLKSEL); switch (phy_drd->extrefclk) { case EXYNOS5_FSEL_50MHZ: - reg |= (PHYCLKRST_MPLL_MULTIPLIER_50M_REF | - PHYCLKRST_SSC_REFCLKSEL(0x00)); + reg |= (FIELD_PREP(PHYCLKRST_SSC_REFCLKSEL, 0x00) | + FIELD_PREP(PHYCLKRST_MPLL_MULTIPLIER, + PHYCLKRST_MPLL_MULTIPLIER_50M_REF)); break; case EXYNOS5_FSEL_24MHZ: - reg |= (PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF | - PHYCLKRST_SSC_REFCLKSEL(0x88)); + reg |= (FIELD_PREP(PHYCLKRST_SSC_REFCLKSEL, 0x88) | + FIELD_PREP(PHYCLKRST_MPLL_MULTIPLIER, + PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF)); break; case EXYNOS5_FSEL_20MHZ: - reg |= (PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF | - PHYCLKRST_SSC_REFCLKSEL(0x00)); + reg |= (FIELD_PREP(PHYCLKRST_SSC_REFCLKSEL, 0x00) | + FIELD_PREP(PHYCLKRST_MPLL_MULTIPLIER, + PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF)); break; case EXYNOS5_FSEL_19MHZ2: - reg |= (PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF | - PHYCLKRST_SSC_REFCLKSEL(0x88)); + reg |= (FIELD_PREP(PHYCLKRST_SSC_REFCLKSEL, 0x88) | + FIELD_PREP(PHYCLKRST_MPLL_MULTIPLIER, + PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF)); break; default: dev_dbg(phy_drd->dev, "unsupported ref clk\n"); @@ -529,13 +605,13 @@ exynos5_usbdrd_utmi_set_refclk(struct phy_usb_instance *inst) /* restore any previous reference clock settings */ reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); - reg &= ~PHYCLKRST_REFCLKSEL_MASK; - reg |= PHYCLKRST_REFCLKSEL_EXT_REFCLK; + reg &= ~PHYCLKRST_REFCLKSEL; + reg |= FIELD_PREP(PHYCLKRST_REFCLKSEL, PHYCLKRST_REFCLKSEL_EXT_REFCLK); - reg &= ~PHYCLKRST_FSEL_UTMI_MASK | - PHYCLKRST_MPLL_MULTIPLIER_MASK | - PHYCLKRST_SSC_REFCLKSEL_MASK; - reg |= PHYCLKRST_FSEL(phy_drd->extrefclk); + reg &= ~(PHYCLKRST_FSEL_UTMI | + PHYCLKRST_MPLL_MULTIPLIER | + PHYCLKRST_SSC_REFCLKSEL); + reg |= FIELD_PREP(PHYCLKRST_FSEL_UTMI, phy_drd->extrefclk); return reg; } @@ -585,8 +661,8 @@ static void exynos5_usbdrd_pipe3_init(struct exynos5_usbdrd_phy *phy_drd) reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); /* Set Tx De-Emphasis level */ - reg &= ~PHYPARAM1_PCS_TXDEEMPH_MASK; - reg |= PHYPARAM1_PCS_TXDEEMPH; + reg &= ~PHYPARAM1_PCS_TXDEEMPH; + reg |= FIELD_PREP(PHYPARAM1_PCS_TXDEEMPH, PHYPARAM1_PCS_TXDEEMPH_VAL); writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); @@ -647,22 +723,38 @@ exynos5_usbdrd_usbdp_g2_v4_pma_lane_mux_sel(struct exynos5_usbdrd_phy *phy_drd) /* lane configuration: USB on all lanes */ reg = readl(regs_base + EXYNOS9_PMA_USBDP_CMN_REG00B8); reg &= ~CMN_REG00B8_LANE_MUX_SEL_DP; - writel(reg, regs_base + EXYNOS9_PMA_USBDP_CMN_REG00B8); - /* - * FIXME: below code supports one connector orientation only. It needs - * updating once we can receive connector events. + * USB on lanes 0 & 1 in normal mode, or 2 & 3 if reversed, DP on the + * other ones. */ + reg |= FIELD_PREP(CMN_REG00B8_LANE_MUX_SEL_DP, + ((phy_drd->orientation == TYPEC_ORIENTATION_NORMAL) + ? (CMN_REG00B8_LANE_MUX_SEL_DP_LANE3 + | CMN_REG00B8_LANE_MUX_SEL_DP_LANE2) + : (CMN_REG00B8_LANE_MUX_SEL_DP_LANE1 + | CMN_REG00B8_LANE_MUX_SEL_DP_LANE0))); + writel(reg, regs_base + EXYNOS9_PMA_USBDP_CMN_REG00B8); + /* override of TX receiver detector and comparator: lane 1 */ reg = readl(regs_base + EXYNOS9_PMA_USBDP_TRSV_REG0413); - reg &= ~TRSV_REG0413_OVRD_LN1_TX_RXD_COMP_EN; - reg &= ~TRSV_REG0413_OVRD_LN1_TX_RXD_EN; + if (phy_drd->orientation == TYPEC_ORIENTATION_NORMAL) { + reg &= ~TRSV_REG0413_OVRD_LN1_TX_RXD_COMP_EN; + reg &= ~TRSV_REG0413_OVRD_LN1_TX_RXD_EN; + } else { + reg |= TRSV_REG0413_OVRD_LN1_TX_RXD_COMP_EN; + reg |= TRSV_REG0413_OVRD_LN1_TX_RXD_EN; + } writel(reg, regs_base + EXYNOS9_PMA_USBDP_TRSV_REG0413); /* lane 3 */ reg = readl(regs_base + EXYNOS9_PMA_USBDP_TRSV_REG0813); - reg |= TRSV_REG0813_OVRD_LN3_TX_RXD_COMP_EN; - reg |= TRSV_REG0813_OVRD_LN3_TX_RXD_EN; + if (phy_drd->orientation == TYPEC_ORIENTATION_NORMAL) { + reg |= TRSV_REG0813_OVRD_LN3_TX_RXD_COMP_EN; + reg |= TRSV_REG0813_OVRD_LN3_TX_RXD_EN; + } else { + reg &= ~TRSV_REG0813_OVRD_LN3_TX_RXD_COMP_EN; + reg &= ~TRSV_REG0813_OVRD_LN3_TX_RXD_EN; + } writel(reg, regs_base + EXYNOS9_PMA_USBDP_TRSV_REG0813); } @@ -700,21 +792,18 @@ exynos5_usbdrd_usbdp_g2_v4_pma_check_cdr_lock(struct exynos5_usbdrd_phy *phy_drd int err; err = readl_poll_timeout( - phy_drd->reg_pma + EXYNOS9_PMA_USBDP_TRSV_REG03C3, - reg, (reg & locked) == locked, sleep_us, timeout_us); - if (!err) - return; - - dev_err(phy_drd->dev, - "timed out waiting for CDR lock (l0): %#.8x, retrying\n", reg); - - /* based on cable orientation, this might be on the other phy port */ - err = readl_poll_timeout( - phy_drd->reg_pma + EXYNOS9_PMA_USBDP_TRSV_REG07C3, + /* lane depends on cable orientation */ + (phy_drd->reg_pma + + ((phy_drd->orientation == TYPEC_ORIENTATION_NORMAL) + ? EXYNOS9_PMA_USBDP_TRSV_REG03C3 + : EXYNOS9_PMA_USBDP_TRSV_REG07C3)), reg, (reg & locked) == locked, sleep_us, timeout_us); if (err) dev_err(phy_drd->dev, - "timed out waiting for CDR lock (l2): %#.8x\n", reg); + "timed out waiting for CDR(l%d) lock: %#.8x\n", + ((phy_drd->orientation == TYPEC_ORIENTATION_NORMAL) + ? 0 + : 2), reg); } static void exynos5_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) @@ -723,14 +812,14 @@ static void exynos5_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); /* Set Loss-of-Signal Detector sensitivity */ - reg &= ~PHYPARAM0_REF_LOSLEVEL_MASK; - reg |= PHYPARAM0_REF_LOSLEVEL; + reg &= ~PHYPARAM0_REF_LOSLEVEL; + reg |= FIELD_PREP(PHYPARAM0_REF_LOSLEVEL, PHYPARAM0_REF_LOSLEVEL_VAL); writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); /* Set Tx De-Emphasis level */ - reg &= ~PHYPARAM1_PCS_TXDEEMPH_MASK; - reg |= PHYPARAM1_PCS_TXDEEMPH; + reg &= ~PHYPARAM1_PCS_TXDEEMPH; + reg |= FIELD_PREP(PHYPARAM1_PCS_TXDEEMPH, PHYPARAM1_PCS_TXDEEMPH_VAL); writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); /* UTMI Power Control */ @@ -761,7 +850,7 @@ static int exynos5_usbdrd_phy_init(struct phy *phy) * See xHCI 1.0 spec, 5.2.4 */ reg = LINKSYSTEM_XHCI_VERSION_CONTROL | - LINKSYSTEM_FLADJ(0x20); + FIELD_PREP(LINKSYSTEM_FLADJ, 0x20); writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_LINKSYSTEM); reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); @@ -920,26 +1009,24 @@ static int crport_handshake(struct exynos5_usbdrd_phy *phy_drd, static int crport_ctrl_write(struct exynos5_usbdrd_phy *phy_drd, u32 addr, u32 data) { + u32 val; int ret; /* Write Address */ - writel(PHYREG0_CR_DATA_IN(addr), - phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); - ret = crport_handshake(phy_drd, PHYREG0_CR_DATA_IN(addr), - PHYREG0_CR_CAP_ADDR); + val = FIELD_PREP(PHYREG0_CR_DATA_IN, addr); + writel(val, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); + ret = crport_handshake(phy_drd, val, PHYREG0_CR_CAP_ADDR); if (ret) return ret; /* Write Data */ - writel(PHYREG0_CR_DATA_IN(data), - phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); - ret = crport_handshake(phy_drd, PHYREG0_CR_DATA_IN(data), - PHYREG0_CR_CAP_DATA); + val = FIELD_PREP(PHYREG0_CR_DATA_IN, data); + writel(val, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); + ret = crport_handshake(phy_drd, val, PHYREG0_CR_CAP_DATA); if (ret) return ret; - ret = crport_handshake(phy_drd, PHYREG0_CR_DATA_IN(data), - PHYREG0_CR_WRITE); + ret = crport_handshake(phy_drd, val, PHYREG0_CR_WRITE); return ret; } @@ -1049,6 +1136,315 @@ static const struct phy_ops exynos5_usbdrd_phy_ops = { .owner = THIS_MODULE, }; +static void exynos7870_usbdrd_phy_isol(struct phy_usb_instance *inst, + bool isolate) +{ + unsigned int val; + + if (!inst->reg_pmu) + return; + + val = isolate ? 0 : EXYNOS7870_USB2PHY_ENABLE; + + regmap_update_bits(inst->reg_pmu, inst->pmu_offset, + EXYNOS7870_USB2PHY_ENABLE, val); +} + +static void exynos7870_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) +{ + u32 reg; + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + /* Use PADREFCLK as ref clock */ + reg &= ~PHYCLKRST_REFCLKSEL; + reg |= FIELD_PREP(PHYCLKRST_REFCLKSEL, PHYCLKRST_REFCLKSEL_PAD_REFCLK); + /* Select ref clock rate */ + reg &= ~PHYCLKRST_FSEL_UTMI; + reg &= ~PHYCLKRST_FSEL_PIPE; + reg |= FIELD_PREP(PHYCLKRST_FSEL_UTMI, phy_drd->extrefclk); + /* Enable suspend and reset the port */ + reg |= PHYCLKRST_EN_UTMISUSPEND; + reg |= PHYCLKRST_COMMONONN; + reg |= PHYCLKRST_PORTRESET; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + udelay(10); + + /* Clear the port reset bit */ + reg &= ~PHYCLKRST_PORTRESET; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + + /* Change PHY PLL tune value */ + reg = readl(phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYPLLTUNE); + if (phy_drd->extrefclk == EXYNOS5_FSEL_24MHZ) + reg |= HSPHYPLLTUNE_PLL_B_TUNE; + else + reg &= ~HSPHYPLLTUNE_PLL_B_TUNE; + reg &= ~HSPHYPLLTUNE_PLL_P_TUNE; + reg |= FIELD_PREP(HSPHYPLLTUNE_PLL_P_TUNE, 14); + writel(reg, phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYPLLTUNE); + + /* High-Speed PHY control */ + reg = readl(phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYCTRL); + reg &= ~HSPHYCTRL_SIDDQ; + reg &= ~HSPHYCTRL_PHYSWRST; + reg &= ~HSPHYCTRL_PHYSWRSTALL; + writel(reg, phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYCTRL); + udelay(500); + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_LINKSYSTEM); + /* + * Setting the Frame length Adj value[6:1] to default 0x20 + * See xHCI 1.0 spec, 5.2.4 + */ + reg |= LINKSYSTEM_XHCI_VERSION_CONTROL; + reg &= ~LINKSYSTEM_FLADJ; + reg |= FIELD_PREP(LINKSYSTEM_FLADJ, 0x20); + /* Set VBUSVALID signal as the VBUS pad is not used */ + reg |= LINKSYSTEM_FORCE_BVALID; + reg |= LINKSYSTEM_FORCE_VBUSVALID; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_LINKSYSTEM); + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI); + /* Release force_sleep & force_suspend */ + reg &= ~PHYUTMI_FORCESLEEP; + reg &= ~PHYUTMI_FORCESUSPEND; + /* DP/DM pull down control */ + reg &= ~PHYUTMI_DMPULLDOWN; + reg &= ~PHYUTMI_DPPULLDOWN; + reg &= ~PHYUTMI_DRVVBUS; + /* Set DP-pull up as the VBUS pad is not used */ + reg |= PHYUTMI_VBUSVLDEXTSEL; + reg |= PHYUTMI_VBUSVLDEXT; + /* Disable OTG block and VBUS valid comparator */ + reg |= PHYUTMI_OTGDISABLE; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI); + + /* Configure OVC IO usage */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_LINKPORT); + reg |= LINKPORT_HOST_PORT_OVCR_U3_SEL | LINKPORT_HOST_PORT_OVCR_U2_SEL; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_LINKPORT); + + /* High-Speed PHY swrst */ + reg = readl(phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYCTRL); + reg |= HSPHYCTRL_PHYSWRST; + writel(reg, phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYCTRL); + udelay(20); + + /* Clear the PHY swrst bit */ + reg = readl(phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYCTRL); + reg &= ~HSPHYCTRL_PHYSWRST; + writel(reg, phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYCTRL); + + if (phy_drd->drv_data->phy_tunes) + exynos5_usbdrd_apply_phy_tunes(phy_drd, + PTS_UTMI_POSTINIT); +} + +static int exynos7870_usbdrd_phy_init(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + int ret; + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); + if (ret) + return ret; + + /* UTMI or PIPE3 specific init */ + inst->phy_cfg->phy_init(phy_drd); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); + + return 0; +} + +static int exynos7870_usbdrd_phy_exit(struct phy *phy) +{ + int ret; + u32 reg; + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); + if (ret) + return ret; + + /* + * Disable the VBUS signal and the ID pull-up resistor. + * Enable force-suspend and force-sleep modes. + */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI); + reg &= ~(PHYUTMI_DRVVBUS | PHYUTMI_VBUSVLDEXT | PHYUTMI_VBUSVLDEXTSEL); + reg &= ~PHYUTMI_IDPULLUP; + reg |= PHYUTMI_FORCESUSPEND | PHYUTMI_FORCESLEEP; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI); + + /* Power down PHY analog blocks */ + reg = readl(phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYCTRL); + reg |= HSPHYCTRL_SIDDQ; + writel(reg, phy_drd->reg_phy + EXYNOS7870_DRD_HSPHYCTRL); + + /* Clear VBUSVALID signal as the VBUS pad is not used */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_LINKSYSTEM); + reg &= ~(LINKSYSTEM_FORCE_BVALID | LINKSYSTEM_FORCE_VBUSVALID); + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_LINKSYSTEM); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); + + return 0; +} + +static const struct phy_ops exynos7870_usbdrd_phy_ops = { + .init = exynos7870_usbdrd_phy_init, + .exit = exynos7870_usbdrd_phy_exit, + .power_on = exynos5_usbdrd_phy_power_on, + .power_off = exynos5_usbdrd_phy_power_off, + .owner = THIS_MODULE, +}; + +static void exynos2200_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) +{ + /* Configure non-Samsung IP PHY, responsible for UTMI */ + phy_init(phy_drd->hs_phy); +} + +static void exynos2200_usbdrd_link_init(struct exynos5_usbdrd_phy *phy_drd) +{ + void __iomem *regs_base = phy_drd->reg_phy; + u32 reg; + + /* + * Disable HWACG (hardware auto clock gating control). This will force + * QACTIVE signal in Q-Channel interface to HIGH level, to make sure + * the PHY clock is not gated by the hardware. + */ + reg = readl(regs_base + EXYNOS850_DRD_LINKCTRL); + reg |= LINKCTRL_FORCE_QACT; + writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL); + + /* De-assert link reset */ + reg = readl(regs_base + EXYNOS2200_DRD_CLKRST); + reg &= ~CLKRST_LINK_SW_RST; + writel(reg, regs_base + EXYNOS2200_DRD_CLKRST); + + /* Set link VBUS Valid */ + reg = readl(regs_base + EXYNOS2200_DRD_UTMI); + reg |= EXYNOS2200_UTMI_FORCE_BVALID | EXYNOS2200_UTMI_FORCE_VBUSVALID; + writel(reg, regs_base + EXYNOS2200_DRD_UTMI); +} + +static void +exynos2200_usbdrd_link_attach_detach_pipe3_phy(struct phy_usb_instance *inst) +{ + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + void __iomem *regs_base = phy_drd->reg_phy; + u32 reg; + + reg = readl(regs_base + EXYNOS850_DRD_LINKCTRL); + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI) { + /* force pipe3 signal for link */ + reg &= ~LINKCTRL_FORCE_PHYSTATUS; + reg |= LINKCTRL_FORCE_PIPE_EN | LINKCTRL_FORCE_RXELECIDLE; + } else { + /* disable forcing pipe interface */ + reg &= ~LINKCTRL_FORCE_PIPE_EN; + } + writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL); + + reg = readl(regs_base + EXYNOS2200_DRD_HSP_MISC); + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI) { + /* calibrate only eUSB phy */ + reg |= FIELD_PREP(HSP_MISC_RES_TUNE, RES_TUNE_PHY1); + reg |= HSP_MISC_SET_REQ_IN2; + } else { + /* calibrate for dual phy */ + reg |= FIELD_PREP(HSP_MISC_RES_TUNE, RES_TUNE_PHY1_PHY2); + reg &= ~HSP_MISC_SET_REQ_IN2; + } + writel(reg, regs_base + EXYNOS2200_DRD_HSP_MISC); + + reg = readl(regs_base + EXYNOS2200_DRD_CLKRST); + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI) + reg &= ~EXYNOS2200_CLKRST_LINK_PCLK_SEL; + else + reg |= EXYNOS2200_CLKRST_LINK_PCLK_SEL; + + writel(reg, regs_base + EXYNOS2200_DRD_CLKRST); +} + +static int exynos2200_usbdrd_phy_init(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + int ret; + + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI) { + /* Power-on PHY ... */ + ret = regulator_bulk_enable(phy_drd->drv_data->n_regulators, + phy_drd->regulators); + if (ret) { + dev_err(phy_drd->dev, + "Failed to enable PHY regulator(s)\n"); + return ret; + } + } + /* + * ... and ungate power via PMU. Without this here, we get an SError + * trying to access PMA registers + */ + exynos5_usbdrd_phy_isol(inst, false); + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); + if (ret) + return ret; + + /* Set up the link controller */ + exynos2200_usbdrd_link_init(phy_drd); + + /* UTMI or PIPE3 link preparation */ + exynos2200_usbdrd_link_attach_detach_pipe3_phy(inst); + + /* UTMI or PIPE3 specific init */ + inst->phy_cfg->phy_init(phy_drd); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); + + return 0; +} + +static int exynos2200_usbdrd_phy_exit(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + void __iomem *regs_base = phy_drd->reg_phy; + u32 reg; + int ret; + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); + if (ret) + return ret; + + reg = readl(regs_base + EXYNOS2200_DRD_UTMI); + reg &= ~(EXYNOS2200_UTMI_FORCE_BVALID | EXYNOS2200_UTMI_FORCE_VBUSVALID); + writel(reg, regs_base + EXYNOS2200_DRD_UTMI); + + reg = readl(regs_base + EXYNOS2200_DRD_CLKRST); + reg |= CLKRST_LINK_SW_RST; + writel(reg, regs_base + EXYNOS2200_DRD_CLKRST); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); + + exynos5_usbdrd_phy_isol(inst, true); + return regulator_bulk_disable(phy_drd->drv_data->n_regulators, + phy_drd->regulators); +} + +static const struct phy_ops exynos2200_usbdrd_phy_ops = { + .init = exynos2200_usbdrd_phy_init, + .exit = exynos2200_usbdrd_phy_exit, + .owner = THIS_MODULE, +}; + static void exynos5_usbdrd_usb_v3p1_pipe_override(struct exynos5_usbdrd_phy *phy_drd) { @@ -1108,16 +1504,18 @@ static void exynos850_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) /* Set VBUS Valid and D+ pull-up control by VBUS pad usage */ reg = readl(regs_base + EXYNOS850_DRD_LINKCTRL); - reg |= LINKCTRL_BUS_FILTER_BYPASS(0xf); + reg |= FIELD_PREP(LINKCTRL_BUS_FILTER_BYPASS, 0xf); writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL); - reg = readl(regs_base + EXYNOS850_DRD_UTMI); - reg |= UTMI_FORCE_BVALID | UTMI_FORCE_VBUSVALID; - writel(reg, regs_base + EXYNOS850_DRD_UTMI); + if (!phy_drd->sw) { + reg = readl(regs_base + EXYNOS850_DRD_UTMI); + reg |= UTMI_FORCE_BVALID | UTMI_FORCE_VBUSVALID; + writel(reg, regs_base + EXYNOS850_DRD_UTMI); - reg = readl(regs_base + EXYNOS850_DRD_HSP); - reg |= HSP_VBUSVLDEXT | HSP_VBUSVLDEXTSEL; - writel(reg, regs_base + EXYNOS850_DRD_HSP); + reg = readl(regs_base + EXYNOS850_DRD_HSP); + reg |= HSP_VBUSVLDEXT | HSP_VBUSVLDEXTSEL; + writel(reg, regs_base + EXYNOS850_DRD_HSP); + } reg = readl(regs_base + EXYNOS850_DRD_SSPPLLCTL); reg &= ~SSPPLLCTL_FSEL; @@ -1184,7 +1582,8 @@ static int exynos850_usbdrd_phy_init(struct phy *phy) return ret; /* UTMI or PIPE3 specific init */ - inst->phy_cfg->phy_init(phy_drd); + scoped_guard(mutex, &phy_drd->phy_mutex) + inst->phy_cfg->phy_init(phy_drd); clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); @@ -1203,6 +1602,8 @@ static int exynos850_usbdrd_phy_exit(struct phy *phy) if (ret) return ret; + guard(mutex)(&phy_drd->phy_mutex); + /* Set PHY clock and control HS PHY */ reg = readl(regs_base + EXYNOS850_DRD_UTMI); reg &= ~(UTMI_DP_PULLDOWN | UTMI_DM_PULLDOWN); @@ -1296,14 +1697,17 @@ static int exynos5_usbdrd_gs101_phy_exit(struct phy *phy) struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); int ret; + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI) { + ret = exynos850_usbdrd_phy_exit(phy); + if (ret) + return ret; + } + + exynos5_usbdrd_phy_isol(inst, true); + if (inst->phy_cfg->id != EXYNOS5_DRDPHY_UTMI) return 0; - ret = exynos850_usbdrd_phy_exit(phy); - if (ret) - return ret; - - exynos5_usbdrd_phy_isol(inst, true); return regulator_bulk_disable(phy_drd->drv_data->n_regulators, phy_drd->regulators); } @@ -1350,23 +1754,114 @@ static int exynos5_usbdrd_phy_clk_handle(struct exynos5_usbdrd_phy *phy_drd) return dev_err_probe(phy_drd->dev, ret, "failed to get phy core clock(s)\n"); - ref_clk = NULL; - for (int i = 0; i < phy_drd->drv_data->n_core_clks; ++i) { - if (!strcmp(phy_drd->core_clks[i].id, "ref")) { - ref_clk = phy_drd->core_clks[i].clk; - break; + if (phy_drd->drv_data->n_core_clks) { + ref_clk = NULL; + for (int i = 0; i < phy_drd->drv_data->n_core_clks; ++i) { + if (!strcmp(phy_drd->core_clks[i].id, "ref")) { + ref_clk = phy_drd->core_clks[i].clk; + break; + } } + if (!ref_clk) + return dev_err_probe(phy_drd->dev, -ENODEV, + "failed to find phy reference clock\n"); + + ref_rate = clk_get_rate(ref_clk); + ret = exynos5_rate_to_clk(ref_rate, &phy_drd->extrefclk); + if (ret) + return dev_err_probe(phy_drd->dev, ret, + "clock rate (%ld) not supported\n", + ref_rate); } - if (!ref_clk) - return dev_err_probe(phy_drd->dev, -ENODEV, - "failed to find phy reference clock\n"); - ref_rate = clk_get_rate(ref_clk); - ret = exynos5_rate_to_clk(ref_rate, &phy_drd->extrefclk); - if (ret) - return dev_err_probe(phy_drd->dev, ret, - "clock rate (%ld) not supported\n", - ref_rate); + return 0; +} + +static const struct exynos5_usbdrd_phy_config phy_cfg_exynos2200[] = { + { + .id = EXYNOS5_DRDPHY_UTMI, + .phy_isol = exynos5_usbdrd_phy_isol, + .phy_init = exynos2200_usbdrd_utmi_init, + }, +}; + +static int exynos5_usbdrd_orien_sw_set(struct typec_switch_dev *sw, + enum typec_orientation orientation) +{ + struct exynos5_usbdrd_phy *phy_drd = typec_switch_get_drvdata(sw); + int ret; + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); + if (ret) { + dev_err(phy_drd->dev, "Failed to enable PHY clocks(s)\n"); + return ret; + } + + scoped_guard(mutex, &phy_drd->phy_mutex) { + void __iomem * const regs_base = phy_drd->reg_phy; + unsigned int reg; + + if (orientation == TYPEC_ORIENTATION_NONE) { + reg = readl(regs_base + EXYNOS850_DRD_UTMI); + reg &= ~(UTMI_FORCE_VBUSVALID | UTMI_FORCE_BVALID); + writel(reg, regs_base + EXYNOS850_DRD_UTMI); + + reg = readl(regs_base + EXYNOS850_DRD_HSP); + reg |= HSP_VBUSVLDEXTSEL; + reg &= ~HSP_VBUSVLDEXT; + writel(reg, regs_base + EXYNOS850_DRD_HSP); + } else { + reg = readl(regs_base + EXYNOS850_DRD_UTMI); + reg |= UTMI_FORCE_VBUSVALID | UTMI_FORCE_BVALID; + writel(reg, regs_base + EXYNOS850_DRD_UTMI); + + reg = readl(regs_base + EXYNOS850_DRD_HSP); + reg |= HSP_VBUSVLDEXTSEL | HSP_VBUSVLDEXT; + writel(reg, regs_base + EXYNOS850_DRD_HSP); + } + + phy_drd->orientation = orientation; + } + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); + + return 0; +} + +static void exynos5_usbdrd_orien_switch_unregister(void *data) +{ + struct exynos5_usbdrd_phy *phy_drd = data; + + typec_switch_unregister(phy_drd->sw); +} + +static int exynos5_usbdrd_setup_notifiers(struct exynos5_usbdrd_phy *phy_drd) +{ + int ret; + + if (!IS_ENABLED(CONFIG_TYPEC)) + return 0; + + if (device_property_present(phy_drd->dev, "orientation-switch")) { + struct typec_switch_desc sw_desc = { }; + + sw_desc.drvdata = phy_drd; + sw_desc.fwnode = dev_fwnode(phy_drd->dev); + sw_desc.set = exynos5_usbdrd_orien_sw_set; + + phy_drd->sw = typec_switch_register(phy_drd->dev, &sw_desc); + if (IS_ERR(phy_drd->sw)) + return dev_err_probe(phy_drd->dev, + PTR_ERR(phy_drd->sw), + "Failed to register TypeC orientation switch\n"); + + ret = devm_add_action_or_reset(phy_drd->dev, + exynos5_usbdrd_orien_switch_unregister, + phy_drd); + if (ret) + return dev_err_probe(phy_drd->dev, ret, + "Failed to register TypeC orientation devm action\n"); + } return 0; } @@ -1386,6 +1881,14 @@ static const struct exynos5_usbdrd_phy_config phy_cfg_exynos5[] = { }, }; +static const struct exynos5_usbdrd_phy_config phy_cfg_exynos7870[] = { + { + .id = EXYNOS5_DRDPHY_UTMI, + .phy_isol = exynos7870_usbdrd_phy_isol, + .phy_init = exynos7870_usbdrd_utmi_init, + }, +}; + static const struct exynos5_usbdrd_phy_config phy_cfg_exynos850[] = { { .id = EXYNOS5_DRDPHY_UTMI, @@ -1394,6 +1897,30 @@ static const struct exynos5_usbdrd_phy_config phy_cfg_exynos850[] = { }, }; +static +const struct exynos5_usbdrd_phy_tuning exynos7870_tunes_utmi_postinit[] = { + PHY_TUNING_ENTRY_PHY(EXYNOS5_DRD_PHYPARAM0, + (PHYPARAM0_TXVREFTUNE | PHYPARAM0_TXRISETUNE | + PHYPARAM0_TXRESTUNE | PHYPARAM0_TXPREEMPPULSETUNE | + PHYPARAM0_TXPREEMPAMPTUNE | PHYPARAM0_TXHSXVTUNE | + PHYPARAM0_TXFSLSTUNE | PHYPARAM0_SQRXTUNE | + PHYPARAM0_OTGTUNE | PHYPARAM0_COMPDISTUNE), + (FIELD_PREP_CONST(PHYPARAM0_TXVREFTUNE, 14) | + FIELD_PREP_CONST(PHYPARAM0_TXRISETUNE, 1) | + FIELD_PREP_CONST(PHYPARAM0_TXRESTUNE, 3) | + FIELD_PREP_CONST(PHYPARAM0_TXPREEMPAMPTUNE, 0) | + FIELD_PREP_CONST(PHYPARAM0_TXHSXVTUNE, 0) | + FIELD_PREP_CONST(PHYPARAM0_TXFSLSTUNE, 3) | + FIELD_PREP_CONST(PHYPARAM0_SQRXTUNE, 6) | + FIELD_PREP_CONST(PHYPARAM0_OTGTUNE, 2) | + FIELD_PREP_CONST(PHYPARAM0_COMPDISTUNE, 3))), + PHY_TUNING_ENTRY_LAST +}; + +static const struct exynos5_usbdrd_phy_tuning *exynos7870_tunes[PTS_MAX] = { + [PTS_UTMI_POSTINIT] = exynos7870_tunes_utmi_postinit, +}; + static const char * const exynos5_clk_names[] = { "phy", }; @@ -1410,6 +1937,19 @@ static const char * const exynos5_regulator_names[] = { "vbus", "vbus-boost", }; +static const struct exynos5_usbdrd_phy_drvdata exynos2200_usb32drd_phy = { + .phy_cfg = phy_cfg_exynos2200, + .phy_ops = &exynos2200_usbdrd_phy_ops, + .pmu_offset_usbdrd0_phy = EXYNOS2200_PHY_CTRL_USB20, + .clk_names = exynos5_clk_names, + .n_clks = ARRAY_SIZE(exynos5_clk_names), + /* clocks and regulators are specific to the underlying PHY blocks */ + .core_clk_names = NULL, + .n_core_clks = 0, + .regulator_names = NULL, + .n_regulators = 0, +}; + static const struct exynos5_usbdrd_phy_drvdata exynos5420_usbdrd_phy = { .phy_cfg = phy_cfg_exynos5, .phy_ops = &exynos5_usbdrd_phy_ops, @@ -1460,6 +2000,19 @@ static const struct exynos5_usbdrd_phy_drvdata exynos7_usbdrd_phy = { .n_regulators = ARRAY_SIZE(exynos5_regulator_names), }; +static const struct exynos5_usbdrd_phy_drvdata exynos7870_usbdrd_phy = { + .phy_cfg = phy_cfg_exynos7870, + .phy_tunes = exynos7870_tunes, + .phy_ops = &exynos7870_usbdrd_phy_ops, + .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, + .clk_names = exynos5_clk_names, + .n_clks = ARRAY_SIZE(exynos5_clk_names), + .core_clk_names = exynos5_core_clk_names, + .n_core_clks = ARRAY_SIZE(exynos5_core_clk_names), + .regulator_names = exynos5_regulator_names, + .n_regulators = ARRAY_SIZE(exynos5_regulator_names), +}; + static const struct exynos5_usbdrd_phy_drvdata exynos850_usbdrd_phy = { .phy_cfg = phy_cfg_exynos850, .phy_ops = &exynos850_usbdrd_phy_ops, @@ -1472,6 +2025,35 @@ static const struct exynos5_usbdrd_phy_drvdata exynos850_usbdrd_phy = { .n_regulators = ARRAY_SIZE(exynos5_regulator_names), }; +static const struct exynos5_usbdrd_phy_tuning exynos990_tunes_utmi_postinit[] = { + PHY_TUNING_ENTRY_PHY(EXYNOS850_DRD_HSPPARACON, + (HSPPARACON_TXVREF | + HSPPARACON_TXPREEMPAMP | HSPPARACON_SQRX | + HSPPARACON_COMPDIS), + (FIELD_PREP_CONST(HSPPARACON_TXVREF, 7) | + FIELD_PREP_CONST(HSPPARACON_TXPREEMPAMP, 3) | + FIELD_PREP_CONST(HSPPARACON_SQRX, 5) | + FIELD_PREP_CONST(HSPPARACON_COMPDIS, 7))), + PHY_TUNING_ENTRY_LAST +}; + +static const struct exynos5_usbdrd_phy_tuning *exynos990_tunes[PTS_MAX] = { + [PTS_UTMI_POSTINIT] = exynos990_tunes_utmi_postinit, +}; + +static const struct exynos5_usbdrd_phy_drvdata exynos990_usbdrd_phy = { + .phy_cfg = phy_cfg_exynos850, + .phy_ops = &exynos850_usbdrd_phy_ops, + .phy_tunes = exynos990_tunes, + .pmu_offset_usbdrd0_phy = EXYNOS990_PHY_CTRL_USB20, + .clk_names = exynos5_clk_names, + .n_clks = ARRAY_SIZE(exynos5_clk_names), + .core_clk_names = exynos5_core_clk_names, + .n_core_clks = ARRAY_SIZE(exynos5_core_clk_names), + .regulator_names = exynos5_regulator_names, + .n_regulators = ARRAY_SIZE(exynos5_regulator_names), +}; + static const struct exynos5_usbdrd_phy_config phy_cfg_gs101[] = { { .id = EXYNOS5_DRDPHY_UTMI, @@ -1510,8 +2092,11 @@ static const struct exynos5_usbdrd_phy_tuning gs101_tunes_pipe3_preinit[] = { PHY_TUNING_ENTRY_PMA(0x09e0, -1, 0x00), PHY_TUNING_ENTRY_PMA(0x09e4, -1, 0x36), PHY_TUNING_ENTRY_PMA(0x1e7c, -1, 0x06), - PHY_TUNING_ENTRY_PMA(0x1e90, -1, 0x00), - PHY_TUNING_ENTRY_PMA(0x1e94, -1, 0x36), + PHY_TUNING_ENTRY_PMA(0x19e0, -1, 0x00), + PHY_TUNING_ENTRY_PMA(0x19e4, -1, 0x36), + /* fix bootloader bug */ + PHY_TUNING_ENTRY_PMA(0x1e90, -1, 0x02), + PHY_TUNING_ENTRY_PMA(0x1e94, -1, 0x0b), /* improve LVCC */ PHY_TUNING_ENTRY_PMA(0x08f0, -1, 0x30), PHY_TUNING_ENTRY_PMA(0x18f0, -1, 0x30), @@ -1652,6 +2237,9 @@ static const struct of_device_id exynos5_usbdrd_phy_of_match[] = { .compatible = "google,gs101-usb31drd-phy", .data = &gs101_usbd31rd_phy }, { + .compatible = "samsung,exynos2200-usb32drd-phy", + .data = &exynos2200_usb32drd_phy, + }, { .compatible = "samsung,exynos5250-usbdrd-phy", .data = &exynos5250_usbdrd_phy }, { @@ -1664,8 +2252,14 @@ static const struct of_device_id exynos5_usbdrd_phy_of_match[] = { .compatible = "samsung,exynos7-usbdrd-phy", .data = &exynos7_usbdrd_phy }, { + .compatible = "samsung,exynos7870-usbdrd-phy", + .data = &exynos7870_usbdrd_phy + }, { .compatible = "samsung,exynos850-usbdrd-phy", .data = &exynos850_usbdrd_phy + }, { + .compatible = "samsung,exynos990-usbdrd-phy", + .data = &exynos990_usbdrd_phy }, { }, }; @@ -1695,6 +2289,10 @@ static int exynos5_usbdrd_phy_probe(struct platform_device *pdev) return -EINVAL; phy_drd->drv_data = drv_data; + ret = devm_mutex_init(dev, &phy_drd->phy_mutex); + if (ret) + return ret; + if (of_property_present(dev->of_node, "reg-names")) { void __iomem *reg; @@ -1719,16 +2317,26 @@ static int exynos5_usbdrd_phy_probe(struct platform_device *pdev) return PTR_ERR(phy_drd->reg_phy); } + /* + * USB32DRD 4nm controller implements Synopsys eUSB2.0 PHY + * and Synopsys SS/USBDP COMBOPHY, managed by external code. + */ + if (of_property_present(dev->of_node, "phy-names")) { + phy_drd->hs_phy = devm_of_phy_get(dev, dev->of_node, "hs"); + if (IS_ERR(phy_drd->hs_phy)) + return dev_err_probe(dev, PTR_ERR(phy_drd->hs_phy), + "failed to get hs_phy\n"); + } + ret = exynos5_usbdrd_phy_clk_handle(phy_drd); if (ret) return ret; reg_pmu = syscon_regmap_lookup_by_phandle(dev->of_node, "samsung,pmu-syscon"); - if (IS_ERR(reg_pmu)) { - dev_err(dev, "Failed to lookup PMU regmap\n"); - return PTR_ERR(reg_pmu); - } + if (IS_ERR(reg_pmu)) + return dev_err_probe(dev, PTR_ERR(reg_pmu), + "Failed to lookup PMU regmap\n"); /* * Exynos5420 SoC has multiple channels for USB 3.0 PHY, with @@ -1754,15 +2362,18 @@ static int exynos5_usbdrd_phy_probe(struct platform_device *pdev) if (ret) return dev_err_probe(dev, ret, "failed to get regulators\n"); + ret = exynos5_usbdrd_setup_notifiers(phy_drd); + if (ret) + return ret; + dev_vdbg(dev, "Creating usbdrd_phy phy\n"); for (i = 0; i < EXYNOS5_DRDPHYS_NUM; i++) { struct phy *phy = devm_phy_create(dev, NULL, drv_data->phy_ops); - if (IS_ERR(phy)) { - dev_err(dev, "Failed to create usbdrd_phy phy\n"); - return PTR_ERR(phy); - } + if (IS_ERR(phy)) + return dev_err_probe(dev, PTR_ERR(phy), + "Failed to create usbdrd_phy phy\n"); phy_drd->phys[i].phy = phy; phy_drd->phys[i].index = i; @@ -1786,10 +2397,9 @@ static int exynos5_usbdrd_phy_probe(struct platform_device *pdev) phy_provider = devm_of_phy_provider_register(dev, exynos5_usbdrd_phy_xlate); - if (IS_ERR(phy_provider)) { - dev_err(phy_drd->dev, "Failed to register phy provider\n"); - return PTR_ERR(phy_provider); - } + if (IS_ERR(phy_provider)) + return dev_err_probe(phy_drd->dev, PTR_ERR(phy_provider), + "Failed to register phy provider\n"); return 0; } @@ -1807,4 +2417,3 @@ module_platform_driver(exynos5_usb3drd_phy); MODULE_DESCRIPTION("Samsung Exynos5 SoCs USB 3.0 DRD controller PHY driver"); MODULE_AUTHOR("Vivek Gautam <gautam.vivek@samsung.com>"); MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:exynos5_usb3drd_phy"); |