diff options
Diffstat (limited to 'drivers/pinctrl/Kconfig')
| -rw-r--r-- | drivers/pinctrl/Kconfig | 153 |
1 files changed, 145 insertions, 8 deletions
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 7e4f93a3bc7a..bc7f37afc48b 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -49,6 +49,20 @@ config PINCTRL_AMD Requires ACPI/FDT device enumeration code to set up a platform device. +config PINCTRL_AMDISP + tristate "AMDISP GPIO pin control" + depends on DRM_AMD_ISP || COMPILE_TEST + depends on HAS_IOMEM + select GPIOLIB + select PINCONF + select GENERIC_PINCONF + help + The driver for memory mapped GPIO functionality on AMD platforms + with ISP support. All the pins are output controlled only + + Requires AMDGPU to MFD add device for enumeration to set up as + platform device. + config PINCTRL_APPLE_GPIO tristate "Apple SoC GPIO pin controller driver" depends on ARCH_APPLE @@ -89,12 +103,10 @@ config PINCTRL_AS3722 config PINCTRL_AT91 bool "AT91 pinctrl driver" - depends on OF - depends on ARCH_AT91 + depends on (OF && ARCH_AT91) || COMPILE_TEST select PINMUX select PINCONF select GPIOLIB - select OF_GPIO select GPIOLIB_IRQCHIP help Say Y here to enable the at91 pinctrl driver @@ -194,6 +206,26 @@ config PINCTRL_DIGICOLOR select PINMUX select GENERIC_PINCONF +config PINCTRL_EIC7700 + tristate "EIC7700 PINCTRL driver" + depends on ARCH_ESWIN || COMPILE_TEST + select PINMUX + select GENERIC_PINCONF + select REGULATOR + select REGULATOR_FIXED_VOLTAGE + help + This driver support for the pin controller in ESWIN's EIC7700 SoC, + which supports pin multiplexing, pin configuration,and rgmii voltage + control. + Say Y here to enable the eic7700 pinctrl driver + +config PINCTRL_EP93XX + bool + depends on ARCH_EP93XX || COMPILE_TEST + select PINMUX + select GENERIC_PINCONF + select MFD_SYSCON + config PINCTRL_EQUILIBRIUM tristate "Generic pinctrl and GPIO driver for Intel Lightning Mountain SoC" depends on OF && HAS_IOMEM @@ -213,6 +245,21 @@ config PINCTRL_EQUILIBRIUM desired pin functions, configure GPIO attributes for LGM SoC pins. Pin muxing and pin config settings are retrieved from device tree. +config PINCTRL_EYEQ5 + bool "Mobileye EyeQ5 pinctrl driver" + depends on OF + depends on MACH_EYEQ5 || COMPILE_TEST + select PINMUX + select GENERIC_PINCONF + select AUXILIARY_BUS + default MACH_EYEQ5 + help + Pin controller driver for the Mobileye EyeQ5 platform. It does both + pin config & pin muxing. It does not handle GPIO. + + Pin muxing supports two functions for each pin: first is GPIO, second + is pin-dependent. Pin config is about bias & drive strength. + config PINCTRL_GEMINI bool depends on ARCH_GEMINI @@ -235,7 +282,8 @@ config PINCTRL_INGENIC config PINCTRL_K210 bool "Pinctrl driver for the Canaan Kendryte K210 SoC" - depends on RISCV && SOC_CANAAN_K210 && OF + depends on RISCV && SOC_CANAAN_K210 || COMPILE_TEST + depends on OF select GENERIC_PINMUX_FUNCTIONS select GENERIC_PINCONF select GPIOLIB @@ -246,6 +294,17 @@ config PINCTRL_K210 Add support for the Canaan Kendryte K210 RISC-V SOC Field Programmable IO Array (FPIOA) controller. +config PINCTRL_K230 + bool "Pinctrl driver for the Canaan Kendryte K230 SoC" + depends on OF + depends on ARCH_CANAAN || COMPILE_TEST + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS + select GENERIC_PINCONF + select REGMAP_MMIO + help + Add support for the Canaan Kendryte K230 RISC-V SOC pin controller. + config PINCTRL_KEEMBAY tristate "Pinctrl driver for Intel Keem Bay SoC" depends on ARCH_KEEMBAY || (ARM64 && COMPILE_TEST) @@ -301,6 +360,17 @@ config PINCTRL_LPC18XX help Pinctrl driver for NXP LPC18xx/43xx System Control Unit (SCU). +config PINCTRL_MAX7360 + tristate "MAX7360 Pincontrol support" + depends on MFD_MAX7360 + select PINMUX + select GENERIC_PINCONF + help + Say Y here to enable pin control support for Maxim MAX7360 keypad + controller. + This keypad controller has 8 GPIO pins that may work as GPIO, or PWM, + or rotary encoder alternate modes. + config PINCTRL_MAX77620 tristate "MAX77620/MAX20024 Pincontrol support" depends on MFD_MAX77620 && OF @@ -416,6 +486,15 @@ config PINCTRL_PIC32MZDA def_bool y if PIC32MZDA select PINCTRL_PIC32 +config PINCTRL_PIC64GX + bool "pic64gx gpio2 pinctrl driver" + depends on ARCH_MICROCHIP || COMPILE_TEST + depends on OF + select GENERIC_PINCONF + default y + help + This selects the pinctrl driver for gpio2 on pic64gx. + config PINCTRL_PISTACHIO bool "IMG Pistachio SoC pinctrl driver" depends on OF && (MIPS || COMPILE_TEST) @@ -427,6 +506,15 @@ config PINCTRL_PISTACHIO help This support pinctrl and GPIO driver for IMG Pistachio SoC. +config PINCTRL_POLARFIRE_SOC + bool "Polarfire SoC pinctrl driver" + depends on ARCH_MICROCHIP || COMPILE_TEST + depends on OF + select GENERIC_PINCONF + default y + help + This selects the pinctrl driver for Microchip Polarfire SoC. + config PINCTRL_RK805 tristate "Pinctrl and GPIO driver for RK805 PMIC" depends on MFD_RK8XX @@ -482,6 +570,7 @@ config PINCTRL_STMFX tristate "STMicroelectronics STMFX GPIO expander pinctrl driver" depends on I2C depends on OF_GPIO + depends on HAS_IOMEM select GENERIC_PINCONF select GPIOLIB_IRQCHIP select MFD_STMFX @@ -493,7 +582,7 @@ config PINCTRL_STMFX interrupt-controller. config PINCTRL_SX150X - bool "Semtech SX150x I2C GPIO expander pinctrl driver" + tristate "Semtech SX150x I2C GPIO expander pinctrl driver" depends on I2C=y select PINMUX select PINCONF @@ -509,8 +598,8 @@ config PINCTRL_SX150X - 16 bits: sx1509q, sx1506q config PINCTRL_TB10X - bool - depends on OF && ARC_PLAT_TB10X + bool "Pinctrl for TB10X" if COMPILE_TEST + depends on OF && ARC_PLAT_TB10X || COMPILE_TEST select GPIOLIB config PINCTRL_TPS6594 @@ -529,9 +618,43 @@ config PINCTRL_TPS6594 This driver can also be built as a module called tps6594-pinctrl. +config PINCTRL_TH1520 + tristate "Pinctrl driver for the T-Head TH1520 SoC" + depends on ARCH_THEAD || COMPILE_TEST + depends on OF + select GENERIC_PINMUX_FUNCTIONS + select GENERIC_PINCONF + select PINMUX + help + This is the driver for the pin controller blocks on the + T-Head TH1520 SoC. + + This driver is needed for RISC-V development boards like + the BeagleV Ahead and the LicheePi 4A. + +config PINCTRL_UPBOARD + tristate "AAeon UP board FPGA pin controller" + depends on MFD_UPBOARD_FPGA + select PINMUX + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS + select GPIOLIB + select GPIO_AGGREGATOR + help + Pin controller for the FPGA GPIO lines on UP boards. Due to the + hardware layout, the driver controls the FPGA pins in tandem with + their corresponding Intel SoC GPIOs. + + Currently supported: + - UP Squared + + To compile this driver as a module, choose M here: the module + will be called pinctrl-upboard. + config PINCTRL_ZYNQ bool "Pinctrl driver for Xilinx Zynq" - depends on ARCH_ZYNQ + depends on ARCH_ZYNQ || COMPILE_TEST + depends on OF select PINMUX select GENERIC_PINCONF help @@ -565,11 +688,23 @@ config PINCTRL_MLXBF3 each pin. This driver can also be built as a module called pinctrl-mlxbf3. +config PINCTRL_RP1 + tristate "Pinctrl driver for RP1" + depends on MISC_RP1 + default MISC_RP1 + select PINMUX + select PINCONF + select GENERIC_PINCONF + help + Enable the gpio and pinctrl/mux driver for RaspberryPi RP1 + multi function device. + source "drivers/pinctrl/actions/Kconfig" source "drivers/pinctrl/aspeed/Kconfig" source "drivers/pinctrl/bcm/Kconfig" source "drivers/pinctrl/berlin/Kconfig" source "drivers/pinctrl/cirrus/Kconfig" +source "drivers/pinctrl/cix/Kconfig" source "drivers/pinctrl/freescale/Kconfig" source "drivers/pinctrl/intel/Kconfig" source "drivers/pinctrl/mediatek/Kconfig" @@ -583,6 +718,8 @@ source "drivers/pinctrl/qcom/Kconfig" source "drivers/pinctrl/realtek/Kconfig" source "drivers/pinctrl/renesas/Kconfig" source "drivers/pinctrl/samsung/Kconfig" +source "drivers/pinctrl/sophgo/Kconfig" +source "drivers/pinctrl/spacemit/Kconfig" source "drivers/pinctrl/spear/Kconfig" source "drivers/pinctrl/sprd/Kconfig" source "drivers/pinctrl/starfive/Kconfig" |