summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pinctrl/qcom/pinctrl-spmi-gpio.c')
-rw-r--r--drivers/pinctrl/qcom/pinctrl-spmi-gpio.c163
1 files changed, 126 insertions, 37 deletions
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index f2eac3b05d67..83f940fe30b2 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2012-2014, 2016-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <linux/gpio/driver.h>
@@ -8,15 +9,18 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_irq.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinmux.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/spmi.h>
+#include <linux/string_choices.h>
#include <linux/types.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinmux.h>
+
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include "../core.h"
@@ -36,6 +40,10 @@
#define PMIC_GPIO_SUBTYPE_GPIOC_8CH 0xd
#define PMIC_GPIO_SUBTYPE_GPIO_LV 0x10
#define PMIC_GPIO_SUBTYPE_GPIO_MV 0x11
+#define PMIC_GPIO_SUBTYPE_GPIO_LV_VIN2 0x12
+#define PMIC_GPIO_SUBTYPE_GPIO_MV_VIN3 0x13
+#define PMIC_GPIO_SUBTYPE_GPIO_LV_VIN2_CLK 0x14
+#define PMIC_GPIO_SUBTYPE_GPIO_MV_VIN3_CLK 0x15
#define PMIC_MPP_REG_RT_STS 0x10
#define PMIC_MPP_REG_RT_STS_VAL_MASK 0x1
@@ -98,6 +106,9 @@
#define PMIC_GPIO_OUT_BUF_OPEN_DRAIN_NMOS 1
#define PMIC_GPIO_OUT_BUF_OPEN_DRAIN_PMOS 2
+#define PMIC_GPIO_OUT_STRENGTH_LOW 1
+#define PMIC_GPIO_OUT_STRENGTH_HIGH 3
+
/* PMIC_GPIO_REG_EN_CTL */
#define PMIC_GPIO_REG_MASTER_EN_SHIFT 7
@@ -171,7 +182,6 @@ struct pmic_gpio_state {
struct regmap *map;
struct pinctrl_dev *ctrl;
struct gpio_chip chip;
- struct irq_chip irq;
u8 usid;
u8 pid_base;
};
@@ -430,14 +440,24 @@ static int pmic_gpio_config_get(struct pinctrl_dev *pctldev,
case PIN_CONFIG_OUTPUT_ENABLE:
arg = pad->output_enabled;
break;
- case PIN_CONFIG_OUTPUT:
+ case PIN_CONFIG_LEVEL:
arg = pad->out_value;
break;
case PMIC_GPIO_CONF_PULL_UP:
arg = pad->pullup;
break;
case PMIC_GPIO_CONF_STRENGTH:
- arg = pad->strength;
+ switch (pad->strength) {
+ case PMIC_GPIO_OUT_STRENGTH_HIGH:
+ arg = PMIC_GPIO_STRENGTH_HIGH;
+ break;
+ case PMIC_GPIO_OUT_STRENGTH_LOW:
+ arg = PMIC_GPIO_STRENGTH_LOW;
+ break;
+ default:
+ arg = pad->strength;
+ break;
+ }
break;
case PMIC_GPIO_CONF_ATEST:
arg = pad->atest;
@@ -512,7 +532,7 @@ static int pmic_gpio_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
case PIN_CONFIG_OUTPUT_ENABLE:
pad->output_enabled = arg ? true : false;
break;
- case PIN_CONFIG_OUTPUT:
+ case PIN_CONFIG_LEVEL:
pad->output_enabled = true;
pad->out_value = arg;
break;
@@ -524,7 +544,17 @@ static int pmic_gpio_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
case PMIC_GPIO_CONF_STRENGTH:
if (arg > PMIC_GPIO_STRENGTH_LOW)
return -EINVAL;
- pad->strength = arg;
+ switch (arg) {
+ case PMIC_GPIO_STRENGTH_HIGH:
+ pad->strength = PMIC_GPIO_OUT_STRENGTH_HIGH;
+ break;
+ case PMIC_GPIO_STRENGTH_LOW:
+ pad->strength = PMIC_GPIO_OUT_STRENGTH_LOW;
+ break;
+ default:
+ pad->strength = arg;
+ break;
+ }
break;
case PMIC_GPIO_CONF_ATEST:
if (!pad->lv_mv_type || arg > 4)
@@ -640,7 +670,7 @@ static void pmic_gpio_config_dbg_show(struct pinctrl_dev *pctldev,
"push-pull", "open-drain", "open-source"
};
static const char *const strengths[] = {
- "no", "high", "medium", "low"
+ "no", "low", "medium", "high"
};
pad = pctldev->desc->pins[pin].drv_data;
@@ -675,7 +705,7 @@ static void pmic_gpio_config_dbg_show(struct pinctrl_dev *pctldev,
else
seq_printf(s, " %-4s",
pad->output_enabled ? "out" : "in");
- seq_printf(s, " %-4s", pad->out_value ? "high" : "low");
+ seq_printf(s, " %-4s", str_high_low(pad->out_value));
seq_printf(s, " %-7s", pmic_gpio_functions[function]);
seq_printf(s, " vin-%d", pad->power_source);
seq_printf(s, " %-27s", biases[pad->pullup]);
@@ -709,7 +739,7 @@ static int pmic_gpio_direction_output(struct gpio_chip *chip,
struct pmic_gpio_state *state = gpiochip_get_data(chip);
unsigned long config;
- config = pinconf_to_config_packed(PIN_CONFIG_OUTPUT, val);
+ config = pinconf_to_config_packed(PIN_CONFIG_LEVEL, val);
return pmic_gpio_config_set(state->ctrl, pin, &config, 1);
}
@@ -736,14 +766,14 @@ static int pmic_gpio_get(struct gpio_chip *chip, unsigned pin)
return !!pad->out_value;
}
-static void pmic_gpio_set(struct gpio_chip *chip, unsigned pin, int value)
+static int pmic_gpio_set(struct gpio_chip *chip, unsigned int pin, int value)
{
struct pmic_gpio_state *state = gpiochip_get_data(chip);
unsigned long config;
- config = pinconf_to_config_packed(PIN_CONFIG_OUTPUT, value);
+ config = pinconf_to_config_packed(PIN_CONFIG_LEVEL, value);
- pmic_gpio_config_set(state->ctrl, pin, &config, 1);
+ return pmic_gpio_config_set(state->ctrl, pin, &config, 1);
}
static int pmic_gpio_of_xlate(struct gpio_chip *chip,
@@ -823,6 +853,18 @@ static int pmic_gpio_populate(struct pmic_gpio_state *state,
pad->have_buffer = true;
pad->lv_mv_type = true;
break;
+ case PMIC_GPIO_SUBTYPE_GPIO_LV_VIN2:
+ case PMIC_GPIO_SUBTYPE_GPIO_LV_VIN2_CLK:
+ pad->num_sources = 2;
+ pad->have_buffer = true;
+ pad->lv_mv_type = true;
+ break;
+ case PMIC_GPIO_SUBTYPE_GPIO_MV_VIN3:
+ case PMIC_GPIO_SUBTYPE_GPIO_MV_VIN3_CLK:
+ pad->num_sources = 3;
+ pad->have_buffer = true;
+ pad->lv_mv_type = true;
+ break;
default:
dev_err(state->dev, "unknown GPIO type 0x%x\n", subtype);
return -ENODEV;
@@ -966,16 +1008,13 @@ static int pmic_gpio_child_to_parent_hwirq(struct gpio_chip *chip,
return 0;
}
-static void *pmic_gpio_populate_parent_fwspec(struct gpio_chip *chip,
- unsigned int parent_hwirq,
- unsigned int parent_type)
+static int pmic_gpio_populate_parent_fwspec(struct gpio_chip *chip,
+ union gpio_irq_fwspec *gfwspec,
+ unsigned int parent_hwirq,
+ unsigned int parent_type)
{
struct pmic_gpio_state *state = gpiochip_get_data(chip);
- struct irq_fwspec *fwspec;
-
- fwspec = kzalloc(sizeof(*fwspec), GFP_KERNEL);
- if (!fwspec)
- return NULL;
+ struct irq_fwspec *fwspec = &gfwspec->fwspec;
fwspec->fwnode = chip->irq.parent_domain->fwnode;
@@ -985,9 +1024,36 @@ static void *pmic_gpio_populate_parent_fwspec(struct gpio_chip *chip,
/* param[2] must be left as 0 */
fwspec->param[3] = parent_type;
- return fwspec;
+ return 0;
+}
+
+static void pmic_gpio_irq_mask(struct irq_data *data)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+
+ irq_chip_mask_parent(data);
+ gpiochip_disable_irq(gc, data->hwirq);
}
+static void pmic_gpio_irq_unmask(struct irq_data *data)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+
+ gpiochip_enable_irq(gc, data->hwirq);
+ irq_chip_unmask_parent(data);
+}
+
+static const struct irq_chip spmi_gpio_irq_chip = {
+ .name = "spmi-gpio",
+ .irq_ack = irq_chip_ack_parent,
+ .irq_mask = pmic_gpio_irq_mask,
+ .irq_unmask = pmic_gpio_irq_unmask,
+ .irq_set_type = irq_chip_set_type_parent,
+ .irq_set_wake = irq_chip_set_wake_parent,
+ .flags = IRQCHIP_IMMUTABLE | IRQCHIP_MASK_ON_SUSPEND,
+ GPIOCHIP_IRQ_RESOURCE_HELPERS,
+};
+
static int pmic_gpio_probe(struct platform_device *pdev)
{
struct irq_domain *parent_domain;
@@ -1081,19 +1147,11 @@ static int pmic_gpio_probe(struct platform_device *pdev)
if (!parent_domain)
return -ENXIO;
- state->irq.name = "spmi-gpio",
- state->irq.irq_ack = irq_chip_ack_parent,
- state->irq.irq_mask = irq_chip_mask_parent,
- state->irq.irq_unmask = irq_chip_unmask_parent,
- state->irq.irq_set_type = irq_chip_set_type_parent,
- state->irq.irq_set_wake = irq_chip_set_wake_parent,
- state->irq.flags = IRQCHIP_MASK_ON_SUSPEND,
-
girq = &state->chip.irq;
- girq->chip = &state->irq;
+ gpio_irq_chip_set_chip(girq, &spmi_gpio_irq_chip);
girq->default_type = IRQ_TYPE_NONE;
girq->handler = handle_level_irq;
- girq->fwnode = of_node_to_fwnode(state->dev->of_node);
+ girq->fwnode = dev_fwnode(state->dev);
girq->parent_domain = parent_domain;
girq->child_to_parent_hwirq = pmic_gpio_child_to_parent_hwirq;
girq->populate_parent_alloc_arg = pmic_gpio_populate_parent_fwspec;
@@ -1116,7 +1174,7 @@ static int pmic_gpio_probe(struct platform_device *pdev)
* files which don't set the "gpio-ranges" property or systems that
* utilize ACPI the driver has to call gpiochip_add_pin_range().
*/
- if (!of_property_read_bool(dev->of_node, "gpio-ranges")) {
+ if (!of_property_present(dev->of_node, "gpio-ranges")) {
ret = gpiochip_add_pin_range(&state->chip, dev_name(dev), 0, 0,
npins);
if (ret) {
@@ -1132,12 +1190,11 @@ err_range:
return ret;
}
-static int pmic_gpio_remove(struct platform_device *pdev)
+static void pmic_gpio_remove(struct platform_device *pdev)
{
struct pmic_gpio_state *state = platform_get_drvdata(pdev);
gpiochip_remove(&state->chip);
- return 0;
}
static const struct of_device_id pmic_gpio_of_match[] = {
@@ -1146,12 +1203,16 @@ static const struct of_device_id pmic_gpio_of_match[] = {
{ .compatible = "qcom,pm660-gpio", .data = (void *) 13 },
/* pm660l has 12 GPIOs with holes on 1, 2, 10, 11 and 12 */
{ .compatible = "qcom,pm660l-gpio", .data = (void *) 12 },
+ { .compatible = "qcom,pm6125-gpio", .data = (void *) 9 },
{ .compatible = "qcom,pm6150-gpio", .data = (void *) 10 },
{ .compatible = "qcom,pm6150l-gpio", .data = (void *) 12 },
{ .compatible = "qcom,pm6350-gpio", .data = (void *) 9 },
+ { .compatible = "qcom,pm6450-gpio", .data = (void *) 9 },
+ { .compatible = "qcom,pm7250b-gpio", .data = (void *) 12 },
{ .compatible = "qcom,pm7325-gpio", .data = (void *) 10 },
+ { .compatible = "qcom,pm7550-gpio", .data = (void *) 12 },
+ { .compatible = "qcom,pm7550ba-gpio", .data = (void *) 8},
{ .compatible = "qcom,pm8005-gpio", .data = (void *) 4 },
- { .compatible = "qcom,pm8008-gpio", .data = (void *) 2 },
{ .compatible = "qcom,pm8019-gpio", .data = (void *) 6 },
/* pm8150 has 10 GPIOs with holes on 2, 5, 7 and 8 */
{ .compatible = "qcom,pm8150-gpio", .data = (void *) 10 },
@@ -1161,27 +1222,55 @@ static const struct of_device_id pmic_gpio_of_match[] = {
/* pm8150l has 12 GPIOs with holes on 7 */
{ .compatible = "qcom,pm8150l-gpio", .data = (void *) 12 },
{ .compatible = "qcom,pmc8180c-gpio", .data = (void *) 12 },
+ { .compatible = "qcom,pm8226-gpio", .data = (void *) 8 },
{ .compatible = "qcom,pm8350-gpio", .data = (void *) 10 },
{ .compatible = "qcom,pm8350b-gpio", .data = (void *) 8 },
{ .compatible = "qcom,pm8350c-gpio", .data = (void *) 9 },
+ { .compatible = "qcom,pm8450-gpio", .data = (void *) 4 },
+ { .compatible = "qcom,pm8550-gpio", .data = (void *) 12 },
+ { .compatible = "qcom,pm8550b-gpio", .data = (void *) 12 },
+ { .compatible = "qcom,pm8550ve-gpio", .data = (void *) 8 },
+ { .compatible = "qcom,pm8550vs-gpio", .data = (void *) 6 },
{ .compatible = "qcom,pm8916-gpio", .data = (void *) 4 },
+ /* pm8937 has 8 GPIOs with holes on 3, 4 and 6 */
+ { .compatible = "qcom,pm8937-gpio", .data = (void *) 8 },
{ .compatible = "qcom,pm8941-gpio", .data = (void *) 36 },
/* pm8950 has 8 GPIOs with holes on 3 */
{ .compatible = "qcom,pm8950-gpio", .data = (void *) 8 },
+ /* pm8953 has 8 GPIOs with holes on 3 and 6 */
+ { .compatible = "qcom,pm8953-gpio", .data = (void *) 8 },
{ .compatible = "qcom,pm8994-gpio", .data = (void *) 22 },
{ .compatible = "qcom,pm8998-gpio", .data = (void *) 26 },
{ .compatible = "qcom,pma8084-gpio", .data = (void *) 22 },
+ { .compatible = "qcom,pmc8380-gpio", .data = (void *) 10 },
+ { .compatible = "qcom,pmcx0102-gpio", .data = (void *)14 },
+ { .compatible = "qcom,pmd8028-gpio", .data = (void *) 4 },
+ { .compatible = "qcom,pmh0101-gpio", .data = (void *)18 },
+ { .compatible = "qcom,pmh0104-gpio", .data = (void *)8 },
+ { .compatible = "qcom,pmh0110-gpio", .data = (void *)14 },
+ { .compatible = "qcom,pmi632-gpio", .data = (void *) 8 },
{ .compatible = "qcom,pmi8950-gpio", .data = (void *) 2 },
{ .compatible = "qcom,pmi8994-gpio", .data = (void *) 10 },
{ .compatible = "qcom,pmi8998-gpio", .data = (void *) 14 },
+ { .compatible = "qcom,pmih0108-gpio", .data = (void *) 18 },
+ { .compatible = "qcom,pmiv0104-gpio", .data = (void *) 10 },
{ .compatible = "qcom,pmk8350-gpio", .data = (void *) 4 },
+ { .compatible = "qcom,pmk8550-gpio", .data = (void *) 6 },
+ { .compatible = "qcom,pmk8850-gpio", .data = (void *)8 },
{ .compatible = "qcom,pmm8155au-gpio", .data = (void *) 10 },
+ { .compatible = "qcom,pmm8654au-gpio", .data = (void *) 12 },
+ /* pmp8074 has 12 GPIOs with holes on 1 and 12 */
+ { .compatible = "qcom,pmp8074-gpio", .data = (void *) 12 },
{ .compatible = "qcom,pmr735a-gpio", .data = (void *) 4 },
{ .compatible = "qcom,pmr735b-gpio", .data = (void *) 4 },
+ { .compatible = "qcom,pmr735d-gpio", .data = (void *) 2 },
/* pms405 has 12 GPIOs with holes on 1, 9, and 10 */
{ .compatible = "qcom,pms405-gpio", .data = (void *) 12 },
/* pmx55 has 11 GPIOs with holes on 3, 7, 10, 11 */
{ .compatible = "qcom,pmx55-gpio", .data = (void *) 11 },
+ { .compatible = "qcom,pmx65-gpio", .data = (void *) 16 },
+ { .compatible = "qcom,pmx75-gpio", .data = (void *) 16 },
+ { .compatible = "qcom,pmxr2230-gpio", .data = (void *) 12 },
{ },
};
generated by cgit (git 2.34.1) at 2025-12-27 09:52:18 +0000