diff options
Diffstat (limited to 'drivers/pinctrl/samsung/pinctrl-exynos.h')
| -rw-r--r-- | drivers/pinctrl/samsung/pinctrl-exynos.h | 283 |
1 files changed, 283 insertions, 0 deletions
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.h b/drivers/pinctrl/samsung/pinctrl-exynos.h new file mode 100644 index 000000000000..c9c38f8988dd --- /dev/null +++ b/drivers/pinctrl/samsung/pinctrl-exynos.h @@ -0,0 +1,283 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Exynos specific definitions for Samsung pinctrl and gpiolib driver. + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2012 Linaro Ltd + * http://www.linaro.org + * + * This file contains the Exynos specific definitions for the Samsung + * pinctrl/gpiolib interface drivers. + * + * Author: Thomas Abraham <thomas.ab@samsung.com> + */ + +#ifndef __PINCTRL_SAMSUNG_EXYNOS_H +#define __PINCTRL_SAMSUNG_EXYNOS_H + +/* Values for the pin CON register */ +#define EXYNOS_PIN_CON_FUNC_EINT 0xf + +/* External GPIO and wakeup interrupt related definitions */ +#define EXYNOS_GPIO_ECON_OFFSET 0x700 +#define EXYNOS_GPIO_EFLTCON_OFFSET 0x800 +#define EXYNOS_GPIO_EMASK_OFFSET 0x900 +#define EXYNOS_GPIO_EPEND_OFFSET 0xA00 +#define EXYNOS_WKUP_ECON_OFFSET 0xE00 +#define EXYNOS_WKUP_EMASK_OFFSET 0xF00 +#define EXYNOS_WKUP_EPEND_OFFSET 0xF40 +#define EXYNOS7_WKUP_ECON_OFFSET 0x700 +#define EXYNOS7_WKUP_EMASK_OFFSET 0x900 +#define EXYNOS7_WKUP_EPEND_OFFSET 0xA00 +#define EXYNOS_SVC_OFFSET 0xB08 +#define EXYNOSAUTO_SVC_OFFSET 0xF008 + +/* helpers to access interrupt service register */ +#define EXYNOS_SVC_GROUP_SHIFT 3 +#define EXYNOS_SVC_GROUP_MASK 0x1f +#define EXYNOS_SVC_NUM_MASK 7 +#define EXYNOS_SVC_GROUP(x) ((x >> EXYNOS_SVC_GROUP_SHIFT) & \ + EXYNOS_SVC_GROUP_MASK) + +/* Exynos specific external interrupt trigger types */ +#define EXYNOS_EINT_LEVEL_LOW 0 +#define EXYNOS_EINT_LEVEL_HIGH 1 +#define EXYNOS_EINT_EDGE_FALLING 2 +#define EXYNOS_EINT_EDGE_RISING 3 +#define EXYNOS_EINT_EDGE_BOTH 4 +#define EXYNOS_EINT_CON_MASK 0xF +#define EXYNOS_EINT_CON_LEN 4 + +#define EXYNOS_EINT_MAX_PER_BANK 8 +#define EXYNOS_EINT_NR_WKUP_EINT + +/* + * EINT filter configuration register (on alive banks) has + * the following layout. + * + * BitfieldName[PinNum][Bit:Bit] + * FLT_EN[3][31] FLT_SEL[3][30] FLT_WIDTH[3][29:24] + * FLT_EN[2][23] FLT_SEL[2][22] FLT_WIDTH[2][21:16] + * FLT_EN[1][15] FLT_SEL[1][14] FLT_WIDTH[1][13:8] + * FLT_EN[0][7] FLT_SEL[0][6] FLT_WIDTH[0][5:0] + * + * FLT_EN 0x0 = Disable, 0x1=Enable + * FLT_SEL 0x0 = Analog delay filter, 0x1 Digital filter (clock count) + * FLT_WIDTH Filtering width. Valid when FLT_SEL is 0x1 + */ + +#define EXYNOS_FLTCON_EN BIT(7) +#define EXYNOS_FLTCON_DIGITAL BIT(6) +#define EXYNOS_FLTCON_ANALOG (0 << 6) +#define EXYNOS_FLTCON_LEN 8 + +#define EXYNOS_PIN_BANK_EINTN(pins, reg, id) \ + { \ + .type = &bank_type_off, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_NONE, \ + .name = id \ + } + +#define EXYNOS_PIN_BANK_EINTG(pins, reg, id, offs) \ + { \ + .type = &bank_type_off, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_GPIO, \ + .eint_offset = offs, \ + .name = id \ + } + +#define EXYNOS_PIN_BANK_EINTW(pins, reg, id, offs) \ + { \ + .type = &bank_type_alive, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_WKUP, \ + .eint_offset = offs, \ + .name = id \ + } + +#define EXYNOS5433_PIN_BANK_EINTG(pins, reg, id, offs) \ + { \ + .type = &exynos5433_bank_type_off, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_GPIO, \ + .eint_offset = offs, \ + .name = id \ + } + +#define EXYNOS5433_PIN_BANK_EINTW(pins, reg, id, offs) \ + { \ + .type = &exynos5433_bank_type_alive, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_WKUP, \ + .eint_offset = offs, \ + .name = id \ + } + +#define EXYNOS5433_PIN_BANK_EINTW_EXT(pins, reg, id, offs, pctl_idx) \ + { \ + .type = &exynos5433_bank_type_off, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_WKUP, \ + .eint_offset = offs, \ + .name = id, \ + .pctl_res_idx = pctl_idx, \ + } \ + +#define EXYNOS7870_PIN_BANK_EINTN(pins, reg, id) \ + { \ + .type = &exynos7870_bank_type_alive, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_NONE, \ + .name = id \ + } + +#define EXYNOS7870_PIN_BANK_EINTW(pins, reg, id, offs) \ + { \ + .type = &exynos7870_bank_type_alive, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_WKUP, \ + .eint_offset = offs, \ + .name = id \ + } + +#define EXYNOS850_PIN_BANK_EINTN(pins, reg, id) \ + { \ + .type = &exynos850_bank_type_alive, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_NONE, \ + .name = id \ + } + +#define EXYNOS850_PIN_BANK_EINTG(pins, reg, id, offs) \ + { \ + .type = &exynos850_bank_type_off, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_GPIO, \ + .eint_offset = offs, \ + .name = id \ + } + +#define EXYNOS850_PIN_BANK_EINTW(pins, reg, id, offs) \ + { \ + .type = &exynos850_bank_type_alive, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_WKUP, \ + .eint_offset = offs, \ + .name = id \ + } + +#define EXYNOS8895_PIN_BANK_EINTG(pins, reg, id, offs) \ + { \ + .type = &exynos8895_bank_type_off, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_GPIO, \ + .eint_offset = offs, \ + .name = id \ + } + +#define EXYNOSV920_PIN_BANK_EINTG(pins, reg, id, con_offs, mask_offs, pend_offs) \ + { \ + .type = &exynos850_bank_type_off, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_GPIO, \ + .eint_con_offset = con_offs, \ + .eint_mask_offset = mask_offs, \ + .eint_pend_offset = pend_offs, \ + .name = id \ + } + +#define EXYNOSV920_PIN_BANK_EINTW(pins, reg, id, con_offs, mask_offs, pend_offs) \ + { \ + .type = &exynos850_bank_type_alive, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_WKUP, \ + .eint_con_offset = con_offs, \ + .eint_mask_offset = mask_offs, \ + .eint_pend_offset = pend_offs, \ + .name = id \ + } + +#define GS101_PIN_BANK_EINTG(pins, reg, id, offs, fltcon_offs) \ + { \ + .type = &exynos850_bank_type_off, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_GPIO, \ + .eint_offset = offs, \ + .eint_fltcon_offset = fltcon_offs, \ + .name = id \ + } + +#define GS101_PIN_BANK_EINTW(pins, reg, id, offs, fltcon_offs) \ + { \ + .type = &exynos850_bank_type_alive, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_WKUP, \ + .eint_offset = offs, \ + .eint_fltcon_offset = fltcon_offs, \ + .name = id \ + } + +#define ARTPEC_PIN_BANK_EINTG(pins, reg, id, offs) \ + { \ + .type = &artpec_bank_type_off, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_GPIO, \ + .eint_offset = offs, \ + .name = id \ + } + +/** + * struct exynos_weint_data: irq specific data for all the wakeup interrupts + * generated by the external wakeup interrupt controller. + * @irq: interrupt number within the domain. + * @bank: bank responsible for this interrupt + */ +struct exynos_weint_data { + unsigned int irq; + struct samsung_pin_bank *bank; +}; + +/** + * struct exynos_muxed_weint_data: irq specific data for muxed wakeup interrupts + * generated by the external wakeup interrupt controller. + * @nr_banks: count of banks being part of the mux + * @banks: array of banks being part of the mux + */ +struct exynos_muxed_weint_data { + unsigned int nr_banks; + struct samsung_pin_bank *banks[] __counted_by(nr_banks); +}; + +int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d); +int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d); +void exynosautov920_pinctrl_resume(struct samsung_pin_bank *bank); +void exynosautov920_pinctrl_suspend(struct samsung_pin_bank *bank); +void exynos_pinctrl_suspend(struct samsung_pin_bank *bank); +void exynos_pinctrl_resume(struct samsung_pin_bank *bank); +void gs101_pinctrl_suspend(struct samsung_pin_bank *bank); +void gs101_pinctrl_resume(struct samsung_pin_bank *bank); +struct samsung_retention_ctrl * +exynos_retention_init(struct samsung_pinctrl_drv_data *drvdata, + const struct samsung_retention_data *data); + +#endif /* __PINCTRL_SAMSUNG_EXYNOS_H */ |