summaryrefslogtreecommitdiff
path: root/drivers/platform/x86/intel_atomisp2_pm.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/platform/x86/intel_atomisp2_pm.c')
-rw-r--r--drivers/platform/x86/intel_atomisp2_pm.c148
1 files changed, 0 insertions, 148 deletions
diff --git a/drivers/platform/x86/intel_atomisp2_pm.c b/drivers/platform/x86/intel_atomisp2_pm.c
deleted file mode 100644
index b0f421fea2a5..000000000000
--- a/drivers/platform/x86/intel_atomisp2_pm.c
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Dummy driver for Intel's Image Signal Processor found on Bay and Cherry
- * Trail devices. The sole purpose of this driver is to allow the ISP to
- * be put in D3.
- *
- * Copyright (C) 2018 Hans de Goede <hdegoede@redhat.com>
- *
- * Based on various non upstream patches for ISP support:
- * Copyright (C) 2010-2017 Intel Corporation. All rights reserved.
- * Copyright (c) 2010 Silicon Hive www.siliconhive.com.
- */
-
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/mod_devicetable.h>
-#include <linux/pci.h>
-#include <linux/pm_runtime.h>
-#include <asm/iosf_mbi.h>
-
-/* PCI configuration regs */
-#define PCI_INTERRUPT_CTRL 0x9c
-
-#define PCI_CSI_CONTROL 0xe8
-#define PCI_CSI_CONTROL_PORTS_OFF_MASK 0x7
-
-/* IOSF BT_MBI_UNIT_PMC regs */
-#define ISPSSPM0 0x39
-#define ISPSSPM0_ISPSSC_OFFSET 0
-#define ISPSSPM0_ISPSSC_MASK 0x00000003
-#define ISPSSPM0_ISPSSS_OFFSET 24
-#define ISPSSPM0_ISPSSS_MASK 0x03000000
-#define ISPSSPM0_IUNIT_POWER_ON 0x0
-#define ISPSSPM0_IUNIT_POWER_OFF 0x3
-
-static int isp_set_power(struct pci_dev *dev, bool enable)
-{
- unsigned long timeout;
- u32 val = enable ? ISPSSPM0_IUNIT_POWER_ON :
- ISPSSPM0_IUNIT_POWER_OFF;
-
- /* Write to ISPSSPM0 bit[1:0] to power on/off the IUNIT */
- iosf_mbi_modify(BT_MBI_UNIT_PMC, MBI_REG_READ, ISPSSPM0,
- val, ISPSSPM0_ISPSSC_MASK);
-
- /*
- * There should be no IUNIT access while power-down is
- * in progress HW sighting: 4567865
- * Wait up to 50 ms for the IUNIT to shut down.
- * And we do the same for power on.
- */
- timeout = jiffies + msecs_to_jiffies(50);
- while (1) {
- u32 tmp;
-
- /* Wait until ISPSSPM0 bit[25:24] shows the right value */
- iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, ISPSSPM0, &tmp);
- tmp = (tmp & ISPSSPM0_ISPSSS_MASK) >> ISPSSPM0_ISPSSS_OFFSET;
- if (tmp == val)
- break;
-
- if (time_after(jiffies, timeout)) {
- dev_err(&dev->dev, "IUNIT power-%s timeout.\n",
- enable ? "on" : "off");
- return -EBUSY;
- }
- usleep_range(1000, 2000);
- }
-
- return 0;
-}
-
-static int isp_probe(struct pci_dev *dev, const struct pci_device_id *id)
-{
- pm_runtime_allow(&dev->dev);
- pm_runtime_put_sync_suspend(&dev->dev);
-
- return 0;
-}
-
-static void isp_remove(struct pci_dev *dev)
-{
- pm_runtime_get_sync(&dev->dev);
- pm_runtime_forbid(&dev->dev);
-}
-
-static int isp_pci_suspend(struct device *dev)
-{
- struct pci_dev *pdev = to_pci_dev(dev);
- u32 val;
-
- pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, 0);
-
- /*
- * MRFLD IUNIT DPHY is located in an always-power-on island
- * MRFLD HW design need all CSI ports are disabled before
- * powering down the IUNIT.
- */
- pci_read_config_dword(pdev, PCI_CSI_CONTROL, &val);
- val |= PCI_CSI_CONTROL_PORTS_OFF_MASK;
- pci_write_config_dword(pdev, PCI_CSI_CONTROL, val);
-
- /*
- * We lose config space access when punit power gates
- * the ISP. Can't use pci_set_power_state() because
- * pmcsr won't actually change when we write to it.
- */
- pci_save_state(pdev);
- pdev->current_state = PCI_D3cold;
- isp_set_power(pdev, false);
-
- return 0;
-}
-
-static int isp_pci_resume(struct device *dev)
-{
- struct pci_dev *pdev = to_pci_dev(dev);
-
- isp_set_power(pdev, true);
- pdev->current_state = PCI_D0;
- pci_restore_state(pdev);
-
- return 0;
-}
-
-static UNIVERSAL_DEV_PM_OPS(isp_pm_ops, isp_pci_suspend,
- isp_pci_resume, NULL);
-
-static const struct pci_device_id isp_id_table[] = {
- { PCI_VDEVICE(INTEL, 0x0f38), },
- { PCI_VDEVICE(INTEL, 0x22b8), },
- { 0, }
-};
-MODULE_DEVICE_TABLE(pci, isp_id_table);
-
-static struct pci_driver isp_pci_driver = {
- .name = "intel_atomisp2_pm",
- .id_table = isp_id_table,
- .probe = isp_probe,
- .remove = isp_remove,
- .driver.pm = &isp_pm_ops,
-};
-
-module_pci_driver(isp_pci_driver);
-
-MODULE_DESCRIPTION("Intel AtomISP2 dummy / power-management drv (for suspend)");
-MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
-MODULE_LICENSE("GPL v2");