diff options
Diffstat (limited to 'drivers/power/reset/Kconfig')
| -rw-r--r-- | drivers/power/reset/Kconfig | 138 |
1 files changed, 123 insertions, 15 deletions
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index 6533aa560aa1..f6c1bcbb57de 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig POWER_RESET bool "Board level reset or power off" help @@ -25,7 +26,7 @@ config POWER_RESET_AT91_POWEROFF config POWER_RESET_AT91_RESET tristate "Atmel AT91 reset driver" depends on ARCH_AT91 - default SOC_AT91SAM9 || SOC_SAMA5 + default SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5 help This driver supports restart for Atmel AT91SAM9 and SAMA5 SoCs @@ -33,11 +34,18 @@ config POWER_RESET_AT91_RESET config POWER_RESET_AT91_SAMA5D2_SHDWC tristate "Atmel AT91 SAMA5D2-Compatible shutdown controller driver" depends on ARCH_AT91 - default SOC_SAMA5 + default SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5 help This driver supports the alternate shutdown controller for some Atmel SAMA5 SoCs. It is present for example on SAMA5D2 SoC. +config POWER_RESET_ATC260X + tristate "Actions Semi ATC260x PMIC power-off driver" + depends on MFD_ATC260X + help + This driver provides power-off and restart support for a system + through Actions Semi ATC260x series PMICs. + config POWER_RESET_AXXIA bool "LSI Axxia reset driver" depends on ARCH_AXXIA @@ -58,7 +66,7 @@ config POWER_RESET_BRCMKONA config POWER_RESET_BRCMSTB bool "Broadcom STB reset driver" - depends on ARM || ARM64 || MIPS || COMPILE_TEST + depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST depends on MFD_SYSCON default ARCH_BRCMSTB || BMIPS_GENERIC help @@ -67,6 +75,17 @@ config POWER_RESET_BRCMSTB Say Y here if you have a Broadcom STB board and you wish to have restart support. +config POWER_RESET_EP93XX + bool "Cirrus EP93XX reset driver" if COMPILE_TEST + depends on MFD_SYSCON + default ARCH_EP93XX + select AUXILIARY_BUS + help + This driver provides restart support for Cirrus EP93XX SoC. + + Say Y here if you have a Cirrus EP93XX SoC and you wish + to have restart support. + config POWER_RESET_GEMINI_POWEROFF bool "Cortina Gemini power-off driver" depends on ARCH_GEMINI || COMPILE_TEST @@ -98,6 +117,26 @@ config POWER_RESET_HISI help Reboot support for Hisilicon boards. +config POWER_RESET_LINKSTATION + tristate "Buffalo LinkStation power-off driver" + depends on ARCH_MVEBU || COMPILE_TEST + depends on OF_MDIO && PHYLIB + help + This driver supports turning off some Buffalo LinkStations by + setting an output pin at the ethernet PHY to the correct state. + It also makes the device compatible with the WoL function. + + Say Y here if you have a Buffalo LinkStation LS421D/E. + +config POWER_RESET_MACSMC + tristate "Apple SMC reset/power-off driver" + depends on MFD_MACSMC + help + This driver supports reset and power-off on Apple Mac machines + that implement this functionality via the SMC. + + Say Y here if you have an Apple Silicon Mac. + config POWER_RESET_MSM bool "Qualcomm MSM power-off driver" depends on ARCH_QCOM @@ -117,14 +156,22 @@ config POWER_RESET_QCOM_PON config POWER_RESET_OCELOT_RESET bool "Microsemi Ocelot reset driver" - depends on MSCC_OCELOT || COMPILE_TEST + depends on MSCC_OCELOT || ARCH_SPARX5 || COMPILE_TEST select MFD_SYSCON help - This driver supports restart for Microsemi Ocelot SoC. + This driver supports restart for Microsemi Ocelot SoC and similar. + +config POWER_RESET_ODROID_GO_ULTRA_POWEROFF + bool "Odroid Go Ultra power-off driver" + depends on ARCH_MESON || COMPILE_TEST + depends on I2C=y && OF + help + This driver supports Power off for Odroid Go Ultra device. config POWER_RESET_PIIX4_POWEROFF tristate "Intel PIIX4 power-off driver" depends on PCI + depends on HAS_IOPORT depends on MIPS || COMPILE_TEST help This driver supports powering off a system using the Intel PIIX4 @@ -139,6 +186,16 @@ config POWER_RESET_LTC2952 This driver supports an external powerdown trigger and board power down via the LTC2952. Bindings are made in the device tree. +config POWER_RESET_MT6323 + bool "MediaTek MT6323 power-off driver" + depends on MFD_MT6397 + help + The power-off driver is responsible for externally shutdown down + the power of a remote MediaTek SoC MT6323 is connected to through + controlling a tiny circuit BBPU inside MT6323 RTC. + + Say Y if you have a board where MT6323 could be found. + config POWER_RESET_QNAP bool "QNAP power-off driver" depends on OF_GPIO && PLAT_ORION @@ -148,6 +205,13 @@ config POWER_RESET_QNAP Say Y if you have a QNAP NAS. +config POWER_RESET_REGULATOR + bool "Regulator subsystem power-off driver" + depends on OF && REGULATOR + help + This driver supports turning off your board by disabling a + power regulator defined in the devicetree. + config POWER_RESET_RESTART bool "Restart power-off driver" help @@ -161,6 +225,33 @@ config POWER_RESET_ST help Reset support for STMicroelectronics boards. +config POWER_RESET_TH1520_AON + tristate "T-Head TH1520 AON firmware poweroff and reset driver" + depends on TH1520_PM_DOMAINS + help + This driver supports power-off and reset operations for T-Head + TH1520 SoCs running the AON firmware. + +config POWER_RESET_TORADEX_EC + tristate "Toradex Embedded Controller power-off and reset driver" + depends on ARCH_MXC || COMPILE_TEST + depends on I2C + select REGMAP_I2C + help + This driver supports power-off and reset for SMARC Toradex SoMs, + for example the SMARC iMX8MP and SMARC iMX95, using Toradex + Embedded Controller (EC). + + Say Y here if you have a Toradex SMARC SoM. + + If unsure, say N. + +config POWER_RESET_TPS65086 + bool "TPS65086 restart driver" + depends on MFD_TPS65086 + help + This driver adds support for resetting the TPS65086 PMIC on restart. + config POWER_RESET_VERSATILE bool "ARM Versatile family reboot driver" depends on ARM @@ -173,7 +264,7 @@ config POWER_RESET_VERSATILE config POWER_RESET_VEXPRESS bool "ARM Versatile Express power-off and reset driver" depends on ARM || ARM64 - depends on VEXPRESS_CONFIG + depends on VEXPRESS_CONFIG=y help Power off and reset support for the ARM Ltd. Versatile Express boards. @@ -192,6 +283,15 @@ config POWER_RESET_KEYSTONE help Reboot support for the KEYSTONE SoCs. +config POWER_RESET_SPACEMIT_P1 + tristate "SpacemiT P1 poweroff and reset driver" + depends on ARCH_SPACEMIT || COMPILE_TEST + depends on MFD_SPACEMIT_P1 + default MFD_SPACEMIT_P1 + help + This driver supports power-off and reset operations for the SpacemiT + P1 PMIC. + config POWER_RESET_SYSCON bool "Generic SYSCON regmap reset driver" depends on OF @@ -215,13 +315,6 @@ config POWER_RESET_RMOBILE help Reboot support for Renesas R-Mobile and SH-Mobile SoCs. -config POWER_RESET_ZX - tristate "ZTE SoCs reset driver" - depends on ARCH_ZX || COMPILE_TEST - depends on HAS_IOMEM - help - Reboot support for ZTE SoCs. - config REBOOT_MODE tristate @@ -237,7 +330,7 @@ config SYSCON_REBOOT_MODE action according to the mode. config POWER_RESET_SC27XX - bool "Spreadtrum SC27xx PMIC power-off driver" + tristate "Spreadtrum SC27xx PMIC power-off driver" depends on MFD_SC27XX_PMIC || COMPILE_TEST help This driver supports powering off a system through @@ -245,5 +338,20 @@ config POWER_RESET_SC27XX PMICs includes the SC2720, SC2721, SC2723, SC2730 and SC2731 chips. -endif +config NVMEM_REBOOT_MODE + tristate "Generic NVMEM reboot mode driver" + depends on OF + select REBOOT_MODE + help + Say y here will enable reboot mode driver. This will + get reboot mode arguments and store it in a NVMEM cell, + then the bootloader can read it and take different + action according to the mode. +config POWER_MLXBF + tristate "Mellanox BlueField power handling driver" + depends on (GPIO_MLXBF2 || GPIO_MLXBF3) && ACPI + help + This driver supports reset or low power mode handling for Mellanox BlueField. + +endif |