diff options
Diffstat (limited to 'drivers/power/supply/Kconfig')
| -rw-r--r-- | drivers/power/supply/Kconfig | 122 |
1 files changed, 118 insertions, 4 deletions
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index bcfa63fb9f1e..92f9f7aae92f 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -35,6 +35,9 @@ config APM_POWER Say Y here to enable support APM status emulation using battery class devices. +config ADC_BATTERY_HELPER + tristate + config GENERIC_ADC_BATTERY tristate "Generic battery support using IIO" depends on IIO @@ -107,6 +110,18 @@ config BATTERY_ACT8945A Say Y here to enable support for power supply provided by Active-semi ActivePath ACT8945A charger. +config BATTERY_CHAGALL + tristate "Pegatron Chagall battery driver" + depends on I2C + depends on LEDS_CLASS + help + Say Y to include support for Cypress CG7153AM IC based battery + fuel gauge with custom firmware found in Pegatron Chagall based + tablet line. + + This driver can also be built as a module. If so, the module will be + called chagall-battery. + config BATTERY_CPCAP tristate "Motorola CPCAP PMIC battery driver" depends on MFD_CPCAP && IIO @@ -161,6 +176,16 @@ config BATTERY_DS2782 Say Y here to enable support for the DS2782/DS2786 standalone battery gas-gauge. +config BATTERY_HUAWEI_GAOKUN + tristate "Huawei Matebook E Go power supply" + depends on EC_HUAWEI_GAOKUN + help + This driver enables battery and adapter support on the Huawei Matebook + E Go, which is a sc8280xp-based 2-in-1 tablet. + + To compile the driver as a module, choose M here: the module will be + called huawei-gaokun-battery. + config BATTERY_LEGO_EV3 tristate "LEGO MINDSTORMS EV3 battery" depends on OF && IIO && GPIOLIB && (ARCH_DAVINCI_DA850 || COMPILE_TEST) @@ -222,6 +247,18 @@ config BATTERY_INGENIC This driver can also be built as a module. If so, the module will be called ingenic-battery. +config BATTERY_INTEL_DC_TI + tristate "Intel Bay / Cherry Trail Dollar Cove TI battery driver" + depends on INTEL_SOC_PMIC_CHTDC_TI && INTEL_DC_TI_ADC && IIO && ACPI + select ADC_BATTERY_HELPER + help + Choose this option if you want to monitor battery status on Intel + Bay Trail / Cherry Trail tablets using the Dollar Cove TI PMIC's + coulomb-counter as fuel-gauge. + + To compile this driver as a module, choose M here: the module will be + called intel_dc_ti_battery. + config BATTERY_IPAQ_MICRO tristate "iPAQ Atmel Micro ASIC battery driver" depends on MFD_IPAQ_MICRO @@ -449,11 +486,16 @@ config CHARGER_88PM860X help Say Y here to enable charger for Marvell 88PM860x chip. -config CHARGER_PCF50633 - tristate "NXP PCF50633 MBC" - depends on MFD_PCF50633 +config CHARGER_PF1550 + tristate "NXP PF1550 battery charger driver" + depends on MFD_PF1550 help - Say Y to include support for NXP PCF50633 Main Battery Charger. + Say Y to enable support for the NXP PF1550 battery charger. + The device is a single cell Li-Ion/Li-Polymer battery charger for + portable application. + + This driver can also be built as a module. If so, the module will be + called pf1550-charger. config BATTERY_RX51 tristate "Nokia RX-51 (N900) battery driver" @@ -493,6 +535,16 @@ config CHARGER_TWL4030 help Say Y here to enable support for TWL4030 Battery Charge Interface. +config CHARGER_TWL6030 + tristate "OMAP TWL6030 BCI charger driver" + depends on IIO && TWL4030_CORE + help + Say Y here to enable support for TWL6030/6032 Battery Charge + Interface. + + This driver can be build as a module. If so, the module will be + called twl6030_charger. + config CHARGER_LP8727 tristate "TI/National Semiconductor LP8727 charger driver" depends on I2C @@ -573,6 +625,12 @@ config CHARGER_MAX77693 help Say Y to enable support for the Maxim MAX77693 battery charger. +config CHARGER_MAX77705 + tristate "Maxim MAX77705 battery charger driver" + depends on MFD_MAX77705 + help + Say Y to enable support for the Maxim MAX77705 battery charger. + config CHARGER_MAX77976 tristate "Maxim MAX77976 battery charger driver" depends on I2C @@ -585,6 +643,21 @@ config CHARGER_MAX77976 This driver can also be built as a module. If so, the module will be called max77976_charger. +config CHARGER_MAX8971 + tristate "Maxim MAX8971 battery charger driver" + depends on I2C + depends on EXTCON || !EXTCON + select REGMAP_I2C + help + The MAX8971 is a compact, high-frequency, high-efficiency switch-mode + charger for a one-cell lithium-ion (Li+) battery. It delivers up to + 1.55A of current to the battery from inputs up to 7.5V and withstands + transient inputs up to 22V. + + Say Y to enable support for the Maxim MAX8971 battery charger. + This driver can also be built as a module. If so, the module will be + called max8971_charger. + config CHARGER_MAX8997 tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver" depends on MFD_MAX8997 && REGULATOR_MAX8997 @@ -720,6 +793,13 @@ config CHARGER_BQ2515X rail, ADC for battery and system monitoring, and push-button controller. +config CHARGER_BQ257XX + tristate "TI BQ257XX battery charger family" + depends on MFD_BQ257XX + help + Say Y to enable support for the TI BQ257XX family of battery + charging integrated circuits. + config CHARGER_BQ25890 tristate "TI BQ25890 battery charger driver" depends on I2C @@ -862,6 +942,21 @@ config CHARGER_RT9471 This driver can also be built as a module. If so, the module will be called rt9471. +config CHARGER_RT9756 + tristate "Richtek RT9756 smart cap divider charger driver" + depends on I2C + select REGMAP_I2C + select LINEAR_RANGES + help + This adds support for Richtek RT9756 smart cap divider charger driver. + It's a high efficiency and high charge current charger. the device + integrates smart cap divider topology with 9-channel high speed + ADCs that can provide input and output voltage, current and + temperature monitoring. + + This driver can also be built as a module. If so, the module will be + called rt9756. + config CHARGER_CROS_USBPD tristate "ChromeOS EC based USBPD charger" depends on CROS_USBPD_NOTIFY @@ -908,6 +1003,15 @@ config FUEL_GAUGE_SC27XX Say Y here to enable support for fuel gauge with SC27XX PMIC chips. +config FUEL_GAUGE_STC3117 + tristate "STMicroelectronics STC3117 fuel gauge driver" + depends on CRC8 + depends on I2C + select REGMAP_I2C + help + Say Y here to enable support for fuel gauge with STC3117 + chip. + config CHARGER_UCS1002 tristate "Microchip UCS1002 USB Port Power Controller" depends on I2C @@ -918,6 +1022,15 @@ config CHARGER_UCS1002 Say Y to enable support for Microchip UCS1002 Programmable USB Port Power Controller with Charger Emulation. +config CHARGER_BD71828 + tristate "Power-supply driver for ROHM BD71828 and BD71815 PMIC" + depends on MFD_ROHM_BD71828 + help + Say Y here to enable support for charger and battery + in ROHM BD71815, BD71817, ROHM BD71828 power management + ICs. This driver gets various bits of information about battery + and charger states. + config CHARGER_BD99954 tristate "ROHM bd99954 charger driver" depends on I2C @@ -987,6 +1100,7 @@ config CHARGER_SURFACE config BATTERY_UG3105 tristate "uPI uG3105 battery monitor driver" depends on I2C + select ADC_BATTERY_HELPER help Battery monitor driver for the uPI uG3105 battery monitor. |