summaryrefslogtreecommitdiff
path: root/drivers/power
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/power')
-rw-r--r--drivers/power/Makefile2
-rw-r--r--drivers/power/ab8500_bmdata.c523
-rw-r--r--drivers/power/ab8500_btemp.c96
-rw-r--r--drivers/power/ab8500_charger.c222
-rw-r--r--drivers/power/ab8500_fg.c123
-rw-r--r--drivers/power/abx500_chargalg.c133
6 files changed, 591 insertions, 508 deletions
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 22c8913382c0..b11e0c7ea0f1 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -38,7 +38,7 @@ obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o
obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o
obj-$(CONFIG_BATTERY_RX51) += rx51_battery.o
-obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_btemp.o ab8500_fg.o abx500_chargalg.o
+obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o
obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o
obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o
obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o
diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c
index 03cc528425cb..0bf52369d6a5 100644
--- a/drivers/power/ab8500_bmdata.c
+++ b/drivers/power/ab8500_bmdata.c
@@ -182,206 +182,206 @@ static struct batres_vs_temp temp_to_batres_tbl_9100[] = {
};
static struct abx500_battery_type bat_type_thermistor[] = {
-[BATTERY_UNKNOWN] = {
- /* First element always represent the UNKNOWN battery */
- .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
- .resis_high = 0,
- .resis_low = 0,
- .battery_resistance = 300,
- .charge_full_design = 612,
- .nominal_voltage = 3700,
- .termination_vol = 4050,
- .termination_curr = 200,
- .recharge_vol = 3990,
- .normal_cur_lvl = 400,
- .normal_vol_lvl = 4100,
- .maint_a_cur_lvl = 400,
- .maint_a_vol_lvl = 4050,
- .maint_a_chg_timer_h = 60,
- .maint_b_cur_lvl = 400,
- .maint_b_vol_lvl = 4000,
- .maint_b_chg_timer_h = 200,
- .low_high_cur_lvl = 300,
- .low_high_vol_lvl = 4000,
- .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
- .r_to_t_tbl = temp_tbl,
- .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
- .v_to_cap_tbl = cap_tbl,
- .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
- .batres_tbl = temp_to_batres_tbl_thermistor,
-},
-{
- .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
- .resis_high = 53407,
- .resis_low = 12500,
- .battery_resistance = 300,
- .charge_full_design = 900,
- .nominal_voltage = 3600,
- .termination_vol = 4150,
- .termination_curr = 80,
- .recharge_vol = 4130,
- .normal_cur_lvl = 700,
- .normal_vol_lvl = 4200,
- .maint_a_cur_lvl = 600,
- .maint_a_vol_lvl = 4150,
- .maint_a_chg_timer_h = 60,
- .maint_b_cur_lvl = 600,
- .maint_b_vol_lvl = 4100,
- .maint_b_chg_timer_h = 200,
- .low_high_cur_lvl = 300,
- .low_high_vol_lvl = 4000,
- .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_A_thermistor),
- .r_to_t_tbl = temp_tbl_A_thermistor,
- .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_A_thermistor),
- .v_to_cap_tbl = cap_tbl_A_thermistor,
- .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
- .batres_tbl = temp_to_batres_tbl_thermistor,
+ [BATTERY_UNKNOWN] = {
+ /* First element always represent the UNKNOWN battery */
+ .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
+ .resis_high = 0,
+ .resis_low = 0,
+ .battery_resistance = 300,
+ .charge_full_design = 612,
+ .nominal_voltage = 3700,
+ .termination_vol = 4050,
+ .termination_curr = 200,
+ .recharge_vol = 3990,
+ .normal_cur_lvl = 400,
+ .normal_vol_lvl = 4100,
+ .maint_a_cur_lvl = 400,
+ .maint_a_vol_lvl = 4050,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 400,
+ .maint_b_vol_lvl = 4000,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+ },
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .resis_high = 53407,
+ .resis_low = 12500,
+ .battery_resistance = 300,
+ .charge_full_design = 900,
+ .nominal_voltage = 3600,
+ .termination_vol = 4150,
+ .termination_curr = 80,
+ .recharge_vol = 4130,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_A_thermistor),
+ .r_to_t_tbl = temp_tbl_A_thermistor,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_A_thermistor),
+ .v_to_cap_tbl = cap_tbl_A_thermistor,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
-},
-{
- .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
- .resis_high = 200000,
- .resis_low = 82869,
- .battery_resistance = 300,
- .charge_full_design = 900,
- .nominal_voltage = 3600,
- .termination_vol = 4150,
- .termination_curr = 80,
- .recharge_vol = 4130,
- .normal_cur_lvl = 700,
- .normal_vol_lvl = 4200,
- .maint_a_cur_lvl = 600,
- .maint_a_vol_lvl = 4150,
- .maint_a_chg_timer_h = 60,
- .maint_b_cur_lvl = 600,
- .maint_b_vol_lvl = 4100,
- .maint_b_chg_timer_h = 200,
- .low_high_cur_lvl = 300,
- .low_high_vol_lvl = 4000,
- .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_B_thermistor),
- .r_to_t_tbl = temp_tbl_B_thermistor,
- .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_B_thermistor),
- .v_to_cap_tbl = cap_tbl_B_thermistor,
- .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
- .batres_tbl = temp_to_batres_tbl_thermistor,
-},
+ },
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .resis_high = 200000,
+ .resis_low = 82869,
+ .battery_resistance = 300,
+ .charge_full_design = 900,
+ .nominal_voltage = 3600,
+ .termination_vol = 4150,
+ .termination_curr = 80,
+ .recharge_vol = 4130,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_B_thermistor),
+ .r_to_t_tbl = temp_tbl_B_thermistor,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_B_thermistor),
+ .v_to_cap_tbl = cap_tbl_B_thermistor,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+ },
};
static struct abx500_battery_type bat_type_ext_thermistor[] = {
-[BATTERY_UNKNOWN] = {
- /* First element always represent the UNKNOWN battery */
- .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
- .resis_high = 0,
- .resis_low = 0,
- .battery_resistance = 300,
- .charge_full_design = 612,
- .nominal_voltage = 3700,
- .termination_vol = 4050,
- .termination_curr = 200,
- .recharge_vol = 3990,
- .normal_cur_lvl = 400,
- .normal_vol_lvl = 4100,
- .maint_a_cur_lvl = 400,
- .maint_a_vol_lvl = 4050,
- .maint_a_chg_timer_h = 60,
- .maint_b_cur_lvl = 400,
- .maint_b_vol_lvl = 4000,
- .maint_b_chg_timer_h = 200,
- .low_high_cur_lvl = 300,
- .low_high_vol_lvl = 4000,
- .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
- .r_to_t_tbl = temp_tbl,
- .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
- .v_to_cap_tbl = cap_tbl,
- .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
- .batres_tbl = temp_to_batres_tbl_thermistor,
-},
+ [BATTERY_UNKNOWN] = {
+ /* First element always represent the UNKNOWN battery */
+ .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
+ .resis_high = 0,
+ .resis_low = 0,
+ .battery_resistance = 300,
+ .charge_full_design = 612,
+ .nominal_voltage = 3700,
+ .termination_vol = 4050,
+ .termination_curr = 200,
+ .recharge_vol = 3990,
+ .normal_cur_lvl = 400,
+ .normal_vol_lvl = 4100,
+ .maint_a_cur_lvl = 400,
+ .maint_a_vol_lvl = 4050,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 400,
+ .maint_b_vol_lvl = 4000,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+ },
/*
* These are the batteries that doesn't have an internal NTC resistor to measure
* its temperature. The temperature in this case is measure with a NTC placed
* near the battery but on the PCB.
*/
-{
- .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
- .resis_high = 76000,
- .resis_low = 53000,
- .battery_resistance = 300,
- .charge_full_design = 900,
- .nominal_voltage = 3700,
- .termination_vol = 4150,
- .termination_curr = 100,
- .recharge_vol = 4130,
- .normal_cur_lvl = 700,
- .normal_vol_lvl = 4200,
- .maint_a_cur_lvl = 600,
- .maint_a_vol_lvl = 4150,
- .maint_a_chg_timer_h = 60,
- .maint_b_cur_lvl = 600,
- .maint_b_vol_lvl = 4100,
- .maint_b_chg_timer_h = 200,
- .low_high_cur_lvl = 300,
- .low_high_vol_lvl = 4000,
- .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
- .r_to_t_tbl = temp_tbl,
- .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
- .v_to_cap_tbl = cap_tbl,
- .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
- .batres_tbl = temp_to_batres_tbl_thermistor,
-},
-{
- .name = POWER_SUPPLY_TECHNOLOGY_LION,
- .resis_high = 30000,
- .resis_low = 10000,
- .battery_resistance = 300,
- .charge_full_design = 950,
- .nominal_voltage = 3700,
- .termination_vol = 4150,
- .termination_curr = 100,
- .recharge_vol = 4130,
- .normal_cur_lvl = 700,
- .normal_vol_lvl = 4200,
- .maint_a_cur_lvl = 600,
- .maint_a_vol_lvl = 4150,
- .maint_a_chg_timer_h = 60,
- .maint_b_cur_lvl = 600,
- .maint_b_vol_lvl = 4100,
- .maint_b_chg_timer_h = 200,
- .low_high_cur_lvl = 300,
- .low_high_vol_lvl = 4000,
- .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
- .r_to_t_tbl = temp_tbl,
- .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
- .v_to_cap_tbl = cap_tbl,
- .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
- .batres_tbl = temp_to_batres_tbl_thermistor,
-},
-{
- .name = POWER_SUPPLY_TECHNOLOGY_LION,
- .resis_high = 95000,
- .resis_low = 76001,
- .battery_resistance = 300,
- .charge_full_design = 950,
- .nominal_voltage = 3700,
- .termination_vol = 4150,
- .termination_curr = 100,
- .recharge_vol = 4130,
- .normal_cur_lvl = 700,
- .normal_vol_lvl = 4200,
- .maint_a_cur_lvl = 600,
- .maint_a_vol_lvl = 4150,
- .maint_a_chg_timer_h = 60,
- .maint_b_cur_lvl = 600,
- .maint_b_vol_lvl = 4100,
- .maint_b_chg_timer_h = 200,
- .low_high_cur_lvl = 300,
- .low_high_vol_lvl = 4000,
- .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
- .r_to_t_tbl = temp_tbl,
- .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
- .v_to_cap_tbl = cap_tbl,
- .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
- .batres_tbl = temp_to_batres_tbl_thermistor,
-},
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .resis_high = 76000,
+ .resis_low = 53000,
+ .battery_resistance = 300,
+ .charge_full_design = 900,
+ .nominal_voltage = 3700,
+ .termination_vol = 4150,
+ .termination_curr = 100,
+ .recharge_vol = 4130,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+ },
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LION,
+ .resis_high = 30000,
+ .resis_low = 10000,
+ .battery_resistance = 300,
+ .charge_full_design = 950,
+ .nominal_voltage = 3700,
+ .termination_vol = 4150,
+ .termination_curr = 100,
+ .recharge_vol = 4130,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+ },
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LION,
+ .resis_high = 95000,
+ .resis_low = 76001,
+ .battery_resistance = 300,
+ .charge_full_design = 950,
+ .nominal_voltage = 3700,
+ .termination_vol = 4150,
+ .termination_curr = 100,
+ .recharge_vol = 4130,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+ },
};
static const struct abx500_bm_capacity_levels cap_levels = {
@@ -424,98 +424,83 @@ static const struct abx500_bm_charger_parameters chg = {
};
struct abx500_bm_data ab8500_bm_data = {
- .temp_under = 3,
- .temp_low = 8,
- .temp_high = 43,
- .temp_over = 48,
- .main_safety_tmr_h = 4,
- .temp_interval_chg = 20,
- .temp_interval_nochg = 120,
- .usb_safety_tmr_h = 4,
- .bkup_bat_v = BUP_VCH_SEL_2P6V,
- .bkup_bat_i = BUP_ICH_SEL_150UA,
- .no_maintenance = false,
- .adc_therm = ABx500_ADC_THERM_BATCTRL,
- .chg_unknown_bat = false,
- .enable_overshoot = false,
- .fg_res = 100,
- .cap_levels = &cap_levels,
- .bat_type = bat_type_thermistor,
- .n_btypes = 3,
- .batt_id = 0,
- .interval_charging = 5,
- .interval_not_charging = 120,
- .temp_hysteresis = 3,
- .gnd_lift_resistance = 34,
- .maxi = &maxi_params,
- .chg_params = &chg,
- .fg_params = &fg,
+ .temp_under = 3,
+ .temp_low = 8,
+ .temp_high = 43,
+ .temp_over = 48,
+ .main_safety_tmr_h = 4,
+ .temp_interval_chg = 20,
+ .temp_interval_nochg = 120,
+ .usb_safety_tmr_h = 4,
+ .bkup_bat_v = BUP_VCH_SEL_2P6V,
+ .bkup_bat_i = BUP_ICH_SEL_150UA,
+ .no_maintenance = false,
+ .adc_therm = ABx500_ADC_THERM_BATCTRL,
+ .chg_unknown_bat = false,
+ .enable_overshoot = false,
+ .fg_res = 100,
+ .cap_levels = &cap_levels,
+ .bat_type = bat_type_thermistor,
+ .n_btypes = 3,
+ .batt_id = 0,
+ .interval_charging = 5,
+ .interval_not_charging = 120,
+ .temp_hysteresis = 3,
+ .gnd_lift_resistance = 34,
+ .maxi = &maxi_params,
+ .chg_params = &chg,
+ .fg_params = &fg,
};
-int __devinit
-bmdevs_of_probe(struct device *dev,
- struct device_node *np,
- struct abx500_bm_data **battery)
+int __devinit ab8500_bm_of_probe(struct device *dev,
+ struct device_node *np,
+ struct abx500_bm_data *bm)
{
- struct abx500_battery_type *btype;
- struct device_node *np_bat_supply;
- struct abx500_bm_data *bat;
+ struct batres_vs_temp *tmp_batres_tbl;
+ struct device_node *battery_node;
const char *btech;
- char bat_tech[8];
- int i, thermistor;
-
- *battery = &ab8500_bm_data;
+ int i;
/* get phandle to 'battery-info' node */
- np_bat_supply = of_parse_phandle(np, "battery", 0);
- if (!np_bat_supply) {
- dev_err(dev, "missing property battery\n");
+ battery_node = of_parse_phandle(np, "battery", 0);
+ if (!battery_node) {
+ dev_err(dev, "battery node or reference missing\n");
return -EINVAL;
}
- if (of_property_read_bool(np_bat_supply,
- "thermistor-on-batctrl"))
- thermistor = NTC_INTERNAL;
- else
- thermistor = NTC_EXTERNAL;
- bat = *battery;
- if (thermistor == NTC_EXTERNAL) {
- bat->n_btypes = 4;
- bat->bat_type = bat_type_ext_thermistor;
- bat->adc_therm = ABx500_ADC_THERM_BATTEMP;
- }
- btech = of_get_property(np_bat_supply,
- "stericsson,battery-type", NULL);
+ btech = of_get_property(battery_node, "stericsson,battery-type", NULL);
if (!btech) {
dev_warn(dev, "missing property battery-name/type\n");
- strcpy(bat_tech, "UNKNOWN");
- } else {
- strcpy(bat_tech, btech);
+ return -EINVAL;
}
- if (strncmp(bat_tech, "LION", 4) == 0) {
- bat->no_maintenance = true;
- bat->chg_unknown_bat = true;
- bat->bat_type[BATTERY_UNKNOWN].charge_full_design = 2600;
- bat->bat_type[BATTERY_UNKNOWN].termination_vol = 4150;
- bat->bat_type[BATTERY_UNKNOWN].recharge_vol = 4130;
- bat->bat_type[BATTERY_UNKNOWN].normal_cur_lvl = 520;
- bat->bat_type[BATTERY_UNKNOWN].normal_vol_lvl = 4200;
+ if (strncmp(btech, "LION", 4) == 0) {
+ bm->no_maintenance = true;
+ bm->chg_unknown_bat = true;
+ bm->bat_type[BATTERY_UNKNOWN].charge_full_design = 2600;
+ bm->bat_type[BATTERY_UNKNOWN].termination_vol = 4150;
+ bm->bat_type[BATTERY_UNKNOWN].recharge_vol = 4130;
+ bm->bat_type[BATTERY_UNKNOWN].normal_cur_lvl = 520;
+ bm->bat_type[BATTERY_UNKNOWN].normal_vol_lvl = 4200;
}
- /* select the battery resolution table */
- for (i = 0; i < bat->n_btypes; ++i) {
- btype = (bat->bat_type + i);
- if (thermistor == NTC_EXTERNAL) {
- btype->batres_tbl =
- temp_to_batres_tbl_ext_thermistor;
- } else if (strncmp(bat_tech, "LION", 4) == 0) {
- btype->batres_tbl =
- temp_to_batres_tbl_9100;
- } else {
- btype->batres_tbl =
- temp_to_batres_tbl_thermistor;
- }
+
+ if (of_property_read_bool(battery_node, "thermistor-on-batctrl")) {
+ if (strncmp(btech, "LION", 4) == 0)
+ tmp_batres_tbl = temp_to_batres_tbl_9100;
+ else
+ tmp_batres_tbl = temp_to_batres_tbl_thermistor;
+ } else {
+ bm->n_btypes = 4;
+ bm->bat_type = bat_type_ext_thermistor;
+ bm->adc_therm = ABx500_ADC_THERM_BATTEMP;
+ tmp_batres_tbl = temp_to_batres_tbl_ext_thermistor;
}
- of_node_put(np_bat_supply);
+
+ /* select the battery resolution table */
+ for (i = 0; i < bm->n_btypes; ++i)
+ bm->bat_type[i].batres_tbl = tmp_batres_tbl;
+
+ of_node_put(battery_node);
+
return 0;
}
diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c
index 20e2a7d3ef43..e1d28039ce7b 100644
--- a/drivers/power/ab8500_btemp.c
+++ b/drivers/power/ab8500_btemp.c
@@ -78,12 +78,13 @@ struct ab8500_btemp_ranges {
* @parent: Pointer to the struct ab8500
* @gpadc: Pointer to the struct gpadc
* @fg: Pointer to the struct fg
- * @bat: Pointer to the abx500_bm platform data
+ * @bm: Platform specific battery management information
* @btemp_psy: Structure for BTEMP specific battery properties
* @events: Structure for information about events triggered
* @btemp_ranges: Battery temperature range structure
* @btemp_wq: Work queue for measuring the temperature periodically
* @btemp_periodic_work: Work for measuring the temperature periodically
+ * @initialized: True if battery id read.
*/
struct ab8500_btemp {
struct device *dev;
@@ -94,12 +95,13 @@ struct ab8500_btemp {
struct ab8500 *parent;
struct ab8500_gpadc *gpadc;
struct ab8500_fg *fg;
- struct abx500_bm_data *bat;
+ struct abx500_bm_data *bm;
struct power_supply btemp_psy;
struct ab8500_btemp_events events;
struct ab8500_btemp_ranges btemp_ranges;
struct workqueue_struct *btemp_wq;
struct delayed_work btemp_periodic_work;
+ bool initialized;
};
/* BTEMP power supply properties */
@@ -147,13 +149,13 @@ static int ab8500_btemp_batctrl_volt_to_res(struct ab8500_btemp *di,
return (450000 * (v_batctrl)) / (1800 - v_batctrl);
}
- if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL) {
+ if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL) {
/*
* If the battery has internal NTC, we use the current
* source to calculate the resistance, 7uA or 20uA
*/
rbs = (v_batctrl * 1000
- - di->bat->gnd_lift_resistance * inst_curr)
+ - di->bm->gnd_lift_resistance * inst_curr)
/ di->curr_source;
} else {
/*
@@ -209,7 +211,7 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di,
return 0;
/* Only do this for batteries with internal NTC */
- if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) {
+ if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) {
if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_7UA)
curr = BAT_CTRL_7U_ENA;
else
@@ -241,7 +243,7 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di,
__func__);
goto disable_curr_source;
}
- } else if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) {
+ } else if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) {
dev_dbg(di->dev, "Disable BATCTRL curr source\n");
/* Write 0 to the curr bits */
@@ -457,9 +459,9 @@ static int ab8500_btemp_measure_temp(struct ab8500_btemp *di)
int rbat, rntc, vntc;
u8 id;
- id = di->bat->batt_id;
+ id = di->bm->batt_id;
- if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL &&
+ if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL &&
id != BATTERY_UNKNOWN) {
rbat = ab8500_btemp_get_batctrl_res(di);
@@ -474,8 +476,8 @@ static int ab8500_btemp_measure_temp(struct ab8500_btemp *di)
}
temp = ab8500_btemp_res_to_temp(di,
- di->bat->bat_type[id].r_to_t_tbl,
- di->bat->bat_type[id].n_temp_tbl_elements, rbat);
+ di->bm->bat_type[id].r_to_t_tbl,
+ di->bm->bat_type[id].n_temp_tbl_elements, rbat);
} else {
vntc = ab8500_gpadc_convert(di->gpadc, BTEMP_BALL);
if (vntc < 0) {
@@ -491,8 +493,8 @@ static int ab8500_btemp_measure_temp(struct ab8500_btemp *di)
rntc = 230000 * vntc / (VTVOUT_V - vntc);
temp = ab8500_btemp_res_to_temp(di,
- di->bat->bat_type[id].r_to_t_tbl,
- di->bat->bat_type[id].n_temp_tbl_elements, rntc);
+ di->bm->bat_type[id].r_to_t_tbl,
+ di->bm->bat_type[id].n_temp_tbl_elements, rntc);
prev = temp;
}
dev_dbg(di->dev, "Battery temperature is %d\n", temp);
@@ -513,7 +515,7 @@ static int ab8500_btemp_id(struct ab8500_btemp *di)
u8 i;
di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA;
- di->bat->batt_id = BATTERY_UNKNOWN;
+ di->bm->batt_id = BATTERY_UNKNOWN;
res = ab8500_btemp_get_batctrl_res(di);
if (res < 0) {
@@ -522,23 +524,23 @@ static int ab8500_btemp_id(struct ab8500_btemp *di)
}
/* BATTERY_UNKNOWN is defined on position 0, skip it! */
- for (i = BATTERY_UNKNOWN + 1; i < di->bat->n_btypes; i++) {
- if ((res <= di->bat->bat_type[i].resis_high) &&
- (res >= di->bat->bat_type[i].resis_low)) {
+ for (i = BATTERY_UNKNOWN + 1; i < di->bm->n_btypes; i++) {
+ if ((res <= di->bm->bat_type[i].resis_high) &&
+ (res >= di->bm->bat_type[i].resis_low)) {
dev_dbg(di->dev, "Battery detected on %s"
" low %d < res %d < high: %d"
" index: %d\n",
- di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL ?
+ di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL ?
"BATCTRL" : "BATTEMP",
- di->bat->bat_type[i].resis_low, res,
- di->bat->bat_type[i].resis_high, i);
+ di->bm->bat_type[i].resis_low, res,
+ di->bm->bat_type[i].resis_high, i);
- di->bat->batt_id = i;
+ di->bm->batt_id = i;
break;
}
}
- if (di->bat->batt_id == BATTERY_UNKNOWN) {
+ if (di->bm->batt_id == BATTERY_UNKNOWN) {
dev_warn(di->dev, "Battery identified as unknown"
", resistance %d Ohm\n", res);
return -ENXIO;
@@ -548,13 +550,13 @@ static int ab8500_btemp_id(struct ab8500_btemp *di)
* We only have to change current source if the
* detected type is Type 1, else we use the 7uA source
*/
- if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL &&
- di->bat->batt_id == 1) {
+ if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL &&
+ di->bm->batt_id == 1) {
dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n");
di->curr_source = BTEMP_BATCTRL_CURR_SRC_20UA;
}
- return di->bat->batt_id;
+ return di->bm->batt_id;
}
/**
@@ -569,6 +571,13 @@ static void ab8500_btemp_periodic_work(struct work_struct *work)
struct ab8500_btemp *di = container_of(work,
struct ab8500_btemp, btemp_periodic_work.work);
+ if (!di->initialized) {
+ di->initialized = true;
+ /* Identify the battery */
+ if (ab8500_btemp_id(di) < 0)
+ dev_warn(di->dev, "failed to identify the battery\n");
+ }
+
di->bat_temp = ab8500_btemp_measure_temp(di);
if (di->bat_temp != di->prev_bat_temp) {
@@ -577,9 +586,9 @@ static void ab8500_btemp_periodic_work(struct work_struct *work)
}
if (di->events.ac_conn || di->events.usb_conn)
- interval = di->bat->temp_interval_chg;
+ interval = di->bm->temp_interval_chg;
else
- interval = di->bat->temp_interval_nochg;
+ interval = di->bm->temp_interval_nochg;
/* Schedule a new measurement */
queue_delayed_work(di->btemp_wq,
@@ -806,7 +815,7 @@ static int ab8500_btemp_get_property(struct power_supply *psy,
val->intval = 1;
break;
case POWER_SUPPLY_PROP_TECHNOLOGY:
- val->intval = di->bat->bat_type[di->bat->batt_id].name;
+ val->intval = di->bm->bat_type[di->bm->batt_id].name;
break;
case POWER_SUPPLY_PROP_TEMP:
val->intval = ab8500_btemp_get_temp(di);
@@ -967,6 +976,7 @@ static char *supply_interface[] = {
static int ab8500_btemp_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
+ struct abx500_bm_data *plat = pdev->dev.platform_data;
struct ab8500_btemp *di;
int irq, i, ret = 0;
u8 val;
@@ -976,21 +986,19 @@ static int ab8500_btemp_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "%s no mem for ab8500_btemp\n", __func__);
return -ENOMEM;
}
- di->bat = pdev->mfd_cell->platform_data;
- if (!di->bat) {
- if (np) {
- ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
- if (ret) {
- dev_err(&pdev->dev,
- "failed to get battery information\n");
- return ret;
- }
- } else {
- dev_err(&pdev->dev, "missing dt node for ab8500_btemp\n");
- return -EINVAL;
+
+ if (!plat) {
+ dev_err(&pdev->dev, "no battery management data supplied\n");
+ return -EINVAL;
+ }
+ di->bm = plat;
+
+ if (np) {
+ ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get battery information\n");
+ return ret;
}
- } else {
- dev_info(&pdev->dev, "falling back to legacy platform data\n");
}
/* get parent data */
@@ -998,6 +1006,8 @@ static int ab8500_btemp_probe(struct platform_device *pdev)
di->parent = dev_get_drvdata(pdev->dev.parent);
di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+ di->initialized = false;
+
/* BTEMP supply */
di->btemp_psy.name = "ab8500_btemp";
di->btemp_psy.type = POWER_SUPPLY_TYPE_BATTERY;
@@ -1022,10 +1032,6 @@ static int ab8500_btemp_probe(struct platform_device *pdev)
INIT_DEFERRABLE_WORK(&di->btemp_periodic_work,
ab8500_btemp_periodic_work);
- /* Identify the battery */
- if (ab8500_btemp_id(di) < 0)
- dev_warn(di->dev, "failed to identify the battery\n");
-
/* Set BTEMP thermal limits. Low and Med are fixed */
di->btemp_ranges.btemp_low_limit = BTEMP_THERMAL_LOW_LIMIT;
di->btemp_ranges.btemp_med_limit = BTEMP_THERMAL_MED_LIMIT;
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index 3be9c0ee3fc5..e5755f0ba831 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -79,6 +79,9 @@
/* Lowest charger voltage is 3.39V -> 0x4E */
#define LOW_VOLT_REG 0x4E
+/* Step up/down delay in us */
+#define STEP_UDELAY 1000
+
/* UsbLineStatus register - usb types */
enum ab8500_charger_link_status {
USB_STAT_NOT_CONFIGURED,
@@ -186,7 +189,7 @@ struct ab8500_charger_usb_state {
* @autopower_cfg platform specific power config support for "pwron after pwrloss"
* @parent: Pointer to the struct ab8500
* @gpadc: Pointer to the struct gpadc
- * @bat: Pointer to the abx500_bm platform data
+ * @bm: Platform specific battery management information
* @flags: Structure for information about events triggered
* @usb_state: Structure for usb stack information
* @ac_chg: AC charger power supply
@@ -223,7 +226,7 @@ struct ab8500_charger {
bool autopower_cfg;
struct ab8500 *parent;
struct ab8500_gpadc *gpadc;
- struct abx500_bm_data *bat;
+ struct abx500_bm_data *bm;
struct ab8500_charger_event_flags flags;
struct ab8500_charger_usb_state usb_state;
struct ux500_charger ac_chg;
@@ -936,6 +939,88 @@ static int ab8500_charger_get_usb_cur(struct ab8500_charger *di)
}
/**
+ * ab8500_charger_set_current() - set charger current
+ * @di: pointer to the ab8500_charger structure
+ * @ich: charger current, in mA
+ * @reg: select what charger register to set
+ *
+ * Set charger current.
+ * There is no state machine in the AB to step up/down the charger
+ * current to avoid dips and spikes on MAIN, VBUS and VBAT when
+ * charging is started. Instead we need to implement
+ * this charger current step-up/down here.
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_set_current(struct ab8500_charger *di,
+ int ich, int reg)
+{
+ int ret, i;
+ int curr_index, prev_curr_index, shift_value;
+ u8 reg_value;
+
+ switch (reg) {
+ case AB8500_MCH_IPT_CURLVL_REG:
+ shift_value = MAIN_CH_INPUT_CURR_SHIFT;
+ curr_index = ab8500_current_to_regval(ich);
+ break;
+ case AB8500_USBCH_IPT_CRNTLVL_REG:
+ shift_value = VBUS_IN_CURR_LIM_SHIFT;
+ curr_index = ab8500_vbus_in_curr_to_regval(ich);
+ break;
+ case AB8500_CH_OPT_CRNTLVL_REG:
+ shift_value = 0;
+ curr_index = ab8500_current_to_regval(ich);
+ break;
+ default:
+ dev_err(di->dev, "%s current register not valid\n", __func__);
+ return -ENXIO;
+ }
+
+ if (curr_index < 0) {
+ dev_err(di->dev, "requested current limit out-of-range\n");
+ return -ENXIO;
+ }
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ reg, &reg_value);
+ if (ret < 0) {
+ dev_err(di->dev, "%s read failed\n", __func__);
+ return ret;
+ }
+ prev_curr_index = (reg_value >> shift_value);
+
+ /* only update current if it's been changed */
+ if (prev_curr_index == curr_index)
+ return 0;
+
+ dev_dbg(di->dev, "%s set charger current: %d mA for reg: 0x%02x\n",
+ __func__, ich, reg);
+
+ if (prev_curr_index > curr_index) {
+ for (i = prev_curr_index - 1; i >= curr_index; i--) {
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER, reg, (u8) i << shift_value);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ return ret;
+ }
+ usleep_range(STEP_UDELAY, STEP_UDELAY * 2);
+ }
+ } else {
+ for (i = prev_curr_index + 1; i <= curr_index; i++) {
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER, reg, (u8) i << shift_value);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ return ret;
+ }
+ usleep_range(STEP_UDELAY, STEP_UDELAY * 2);
+ }
+ }
+ return ret;
+}
+
+/**
* ab8500_charger_set_vbus_in_curr() - set VBUS input current limit
* @di: pointer to the ab8500_charger structure
* @ich_in: charger input current limit
@@ -946,12 +1031,10 @@ static int ab8500_charger_get_usb_cur(struct ab8500_charger *di)
static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di,
int ich_in)
{
- int ret;
- int input_curr_index;
int min_value;
/* We should always use to lowest current limit */
- min_value = min(di->bat->chg_params->usb_curr_max, ich_in);
+ min_value = min(di->bm->chg_params->usb_curr_max, ich_in);
switch (min_value) {
case 100:
@@ -966,19 +1049,38 @@ static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di,
break;
}
- input_curr_index = ab8500_vbus_in_curr_to_regval(min_value);
- if (input_curr_index < 0) {
- dev_err(di->dev, "VBUS input current limit too high\n");
- return -ENXIO;
- }
+ return ab8500_charger_set_current(di, min_value,
+ AB8500_USBCH_IPT_CRNTLVL_REG);
+}
- ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
- AB8500_USBCH_IPT_CRNTLVL_REG,
- input_curr_index << VBUS_IN_CURR_LIM_SHIFT);
- if (ret)
- dev_err(di->dev, "%s write failed\n", __func__);
+/**
+ * ab8500_charger_set_main_in_curr() - set main charger input current
+ * @di: pointer to the ab8500_charger structure
+ * @ich_in: input charger current, in mA
+ *
+ * Set main charger input current.
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_set_main_in_curr(struct ab8500_charger *di,
+ int ich_in)
+{
+ return ab8500_charger_set_current(di, ich_in,
+ AB8500_MCH_IPT_CURLVL_REG);
+}
- return ret;
+/**
+ * ab8500_charger_set_output_curr() - set charger output current
+ * @di: pointer to the ab8500_charger structure
+ * @ich_out: output charger current, in mA
+ *
+ * Set charger output current.
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_set_output_curr(struct ab8500_charger *di,
+ int ich_out)
+{
+ return ab8500_charger_set_current(di, ich_out,
+ AB8500_CH_OPT_CRNTLVL_REG);
}
/**
@@ -1074,7 +1176,7 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger,
volt_index = ab8500_voltage_to_regval(vset);
curr_index = ab8500_current_to_regval(iset);
input_curr_index = ab8500_current_to_regval(
- di->bat->chg_params->ac_curr_max);
+ di->bm->chg_params->ac_curr_max);
if (volt_index < 0 || curr_index < 0 || input_curr_index < 0) {
dev_err(di->dev,
"Charger voltage or current too high, "
@@ -1090,23 +1192,24 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger,
return ret;
}
/* MainChInputCurr: current that can be drawn from the charger*/
- ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
- AB8500_MCH_IPT_CURLVL_REG,
- input_curr_index << MAIN_CH_INPUT_CURR_SHIFT);
+ ret = ab8500_charger_set_main_in_curr(di,
+ di->bm->chg_params->ac_curr_max);
if (ret) {
- dev_err(di->dev, "%s write failed\n", __func__);
+ dev_err(di->dev, "%s Failed to set MainChInputCurr\n",
+ __func__);
return ret;
}
/* ChOutputCurentLevel: protected output current */
- ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
- AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index);
+ ret = ab8500_charger_set_output_curr(di, iset);
if (ret) {
- dev_err(di->dev, "%s write failed\n", __func__);
+ dev_err(di->dev, "%s "
+ "Failed to set ChOutputCurentLevel\n",
+ __func__);
return ret;
}
/* Check if VBAT overshoot control should be enabled */
- if (!di->bat->enable_overshoot)
+ if (!di->bm->enable_overshoot)
overshoot = MAIN_CH_NO_OVERSHOOT_ENA_N;
/* Enable Main Charger */
@@ -1158,12 +1261,11 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger,
return ret;
}
- ret = abx500_set_register_interruptible(di->dev,
- AB8500_CHARGER,
- AB8500_CH_OPT_CRNTLVL_REG, CH_OP_CUR_LVL_0P1);
+ ret = ab8500_charger_set_output_curr(di, 0);
if (ret) {
- dev_err(di->dev,
- "%s write failed\n", __func__);
+ dev_err(di->dev, "%s "
+ "Failed to set ChOutputCurentLevel\n",
+ __func__);
return ret;
}
} else {
@@ -1266,14 +1368,15 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger,
return ret;
}
/* ChOutputCurentLevel: protected output current */
- ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
- AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index);
+ ret = ab8500_charger_set_output_curr(di, ich_out);
if (ret) {
- dev_err(di->dev, "%s write failed\n", __func__);
+ dev_err(di->dev, "%s "
+ "Failed to set ChOutputCurentLevel\n",
+ __func__);
return ret;
}
/* Check if VBAT overshoot control should be enabled */
- if (!di->bat->enable_overshoot)
+ if (!di->bm->enable_overshoot)
overshoot = USB_CHG_NO_OVERSHOOT_ENA_N;
/* Enable USB Charger */
@@ -1366,7 +1469,6 @@ static int ab8500_charger_update_charger_current(struct ux500_charger *charger,
int ich_out)
{
int ret;
- int curr_index;
struct ab8500_charger *di;
if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS)
@@ -1376,18 +1478,11 @@ static int ab8500_charger_update_charger_current(struct ux500_charger *charger,
else
return -ENXIO;
- curr_index = ab8500_current_to_regval(ich_out);
- if (curr_index < 0) {
- dev_err(di->dev,
- "Charger current too high, "
- "charging not started\n");
- return -ENXIO;
- }
-
- ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
- AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index);
+ ret = ab8500_charger_set_output_curr(di, ich_out);
if (ret) {
- dev_err(di->dev, "%s write failed\n", __func__);
+ dev_err(di->dev, "%s "
+ "Failed to set ChOutputCurentLevel\n",
+ __func__);
return ret;
}
@@ -2359,8 +2454,8 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
ret = abx500_set_register_interruptible(di->dev,
AB8500_RTC,
AB8500_RTC_BACKUP_CHG_REG,
- di->bat->bkup_bat_v |
- di->bat->bkup_bat_i);
+ di->bm->bkup_bat_v |
+ di->bm->bkup_bat_i);
if (ret) {
dev_err(di->dev, "failed to setup backup battery charging\n");
goto out;
@@ -2541,6 +2636,7 @@ static char *supply_interface[] = {
static int ab8500_charger_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
+ struct abx500_bm_data *plat = pdev->dev.platform_data;
struct ab8500_charger *di;
int irq, i, charger_status, ret = 0;
@@ -2549,24 +2645,22 @@ static int ab8500_charger_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "%s no mem for ab8500_charger\n", __func__);
return -ENOMEM;
}
- di->bat = pdev->mfd_cell->platform_data;
- if (!di->bat) {
- if (np) {
- ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
- if (ret) {
- dev_err(&pdev->dev,
- "failed to get battery information\n");
- return ret;
- }
- di->autopower_cfg = of_property_read_bool(np, "autopower_cfg");
- } else {
- dev_err(&pdev->dev, "missing dt node for ab8500_charger\n");
- return -EINVAL;
+
+ if (!plat) {
+ dev_err(&pdev->dev, "no battery management data supplied\n");
+ return -EINVAL;
+ }
+ di->bm = plat;
+
+ if (np) {
+ ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get battery information\n");
+ return ret;
}
- } else {
- dev_info(&pdev->dev, "falling back to legacy platform data\n");
+ di->autopower_cfg = of_property_read_bool(np, "autopower_cfg");
+ } else
di->autopower_cfg = false;
- }
/* get parent data */
di->dev = &pdev->dev;
diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c
index b3bf178c3462..3d05c73813c8 100644
--- a/drivers/power/ab8500_fg.c
+++ b/drivers/power/ab8500_fg.c
@@ -173,7 +173,7 @@ struct inst_curr_result_list {
* @avg_cap: Average capacity filter
* @parent: Pointer to the struct ab8500
* @gpadc: Pointer to the struct gpadc
- * @bat: Pointer to the abx500_bm platform data
+ * @bm: Platform specific battery management information
* @fg_psy: Structure that holds the FG specific battery properties
* @fg_wq: Work queue for running the FG algorithm
* @fg_periodic_work: Work to run the FG algorithm periodically
@@ -212,7 +212,7 @@ struct ab8500_fg {
struct ab8500_fg_avg_cap avg_cap;
struct ab8500 *parent;
struct ab8500_gpadc *gpadc;
- struct abx500_bm_data *bat;
+ struct abx500_bm_data *bm;
struct power_supply fg_psy;
struct workqueue_struct *fg_wq;
struct delayed_work fg_periodic_work;
@@ -355,7 +355,7 @@ static int ab8500_fg_is_low_curr(struct ab8500_fg *di, int curr)
/*
* We want to know if we're in low current mode
*/
- if (curr > -di->bat->fg_params->high_curr_threshold)
+ if (curr > -di->bm->fg_params->high_curr_threshold)
return true;
else
return false;
@@ -484,8 +484,9 @@ static int ab8500_fg_coulomb_counter(struct ab8500_fg *di, bool enable)
di->flags.fg_enabled = true;
} else {
/* Clear any pending read requests */
- ret = abx500_set_register_interruptible(di->dev,
- AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG, 0);
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
+ (RESET_ACCU | READ_REQ), 0);
if (ret)
goto cc_err;
@@ -647,7 +648,7 @@ int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res)
* 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm
*/
val = (val * QLSB_NANO_AMP_HOURS_X10 * 36 * 4) /
- (1000 * di->bat->fg_res);
+ (1000 * di->bm->fg_res);
if (di->turn_off_fg) {
dev_dbg(di->dev, "%s Disable FG\n", __func__);
@@ -750,7 +751,7 @@ static void ab8500_fg_acc_cur_work(struct work_struct *work)
* 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm
*/
di->accu_charge = (val * QLSB_NANO_AMP_HOURS_X10) /
- (100 * di->bat->fg_res);
+ (100 * di->bm->fg_res);
/*
* Convert to unit value in mA
@@ -762,7 +763,7 @@ static void ab8500_fg_acc_cur_work(struct work_struct *work)
* 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm
*/
di->avg_curr = (val * QLSB_NANO_AMP_HOURS_X10 * 36) /
- (1000 * di->bat->fg_res * (di->fg_samples / 4));
+ (1000 * di->bm->fg_res * (di->fg_samples / 4));
di->flags.conv_done = true;
@@ -814,8 +815,8 @@ static int ab8500_fg_volt_to_capacity(struct ab8500_fg *di, int voltage)
struct abx500_v_to_cap *tbl;
int cap = 0;
- tbl = di->bat->bat_type[di->bat->batt_id].v_to_cap_tbl,
- tbl_size = di->bat->bat_type[di->bat->batt_id].n_v_cap_tbl_elements;
+ tbl = di->bm->bat_type[di->bm->batt_id].v_to_cap_tbl,
+ tbl_size = di->bm->bat_type[di->bm->batt_id].n_v_cap_tbl_elements;
for (i = 0; i < tbl_size; ++i) {
if (voltage > tbl[i].voltage)
@@ -866,8 +867,8 @@ static int ab8500_fg_battery_resistance(struct ab8500_fg *di)
struct batres_vs_temp *tbl;
int resist = 0;
- tbl = di->bat->bat_type[di->bat->batt_id].batres_tbl;
- tbl_size = di->bat->bat_type[di->bat->batt_id].n_batres_tbl_elements;
+ tbl = di->bm->bat_type[di->bm->batt_id].batres_tbl;
+ tbl_size = di->bm->bat_type[di->bm->batt_id].n_batres_tbl_elements;
for (i = 0; i < tbl_size; ++i) {
if (di->bat_temp / 10 > tbl[i].temp)
@@ -888,11 +889,11 @@ static int ab8500_fg_battery_resistance(struct ab8500_fg *di)
dev_dbg(di->dev, "%s Temp: %d battery internal resistance: %d"
" fg resistance %d, total: %d (mOhm)\n",
- __func__, di->bat_temp, resist, di->bat->fg_res / 10,
- (di->bat->fg_res / 10) + resist);
+ __func__, di->bat_temp, resist, di->bm->fg_res / 10,
+ (di->bm->fg_res / 10) + resist);
/* fg_res variable is in 0.1mOhm */
- resist += di->bat->fg_res / 10;
+ resist += di->bm->fg_res / 10;
return resist;
}
@@ -1110,14 +1111,14 @@ static int ab8500_fg_capacity_level(struct ab8500_fg *di)
percent = di->bat_cap.permille / 10;
- if (percent <= di->bat->cap_levels->critical ||
+ if (percent <= di->bm->cap_levels->critical ||
di->flags.low_bat)
ret = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
- else if (percent <= di->bat->cap_levels->low)
+ else if (percent <= di->bm->cap_levels->low)
ret = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
- else if (percent <= di->bat->cap_levels->normal)
+ else if (percent <= di->bm->cap_levels->normal)
ret = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
- else if (percent <= di->bat->cap_levels->high)
+ else if (percent <= di->bm->cap_levels->high)
ret = POWER_SUPPLY_CAPACITY_LEVEL_HIGH;
else
ret = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
@@ -1182,7 +1183,7 @@ static void ab8500_fg_check_capacity_limits(struct ab8500_fg *di, bool init)
di->bat_cap.prev_percent !=
(di->bat_cap.permille) / 10 &&
(di->bat_cap.permille / 10) <
- di->bat->fg_params->maint_thres) {
+ di->bm->fg_params->maint_thres) {
dev_dbg(di->dev,
"battery reported full "
"but capacity dropping: %d\n",
@@ -1284,7 +1285,7 @@ static void ab8500_fg_algorithm_charging(struct ab8500_fg *di)
switch (di->charge_state) {
case AB8500_FG_CHARGE_INIT:
di->fg_samples = SEC_TO_SAMPLE(
- di->bat->fg_params->accu_charging);
+ di->bm->fg_params->accu_charging);
ab8500_fg_coulomb_counter(di, true);
ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_READOUT);
@@ -1346,8 +1347,8 @@ static bool check_sysfs_capacity(struct ab8500_fg *di)
cap_permille = ab8500_fg_convert_mah_to_permille(di,
di->bat_cap.user_mah);
- lower = di->bat_cap.permille - di->bat->fg_params->user_cap_limit * 10;
- upper = di->bat_cap.permille + di->bat->fg_params->user_cap_limit * 10;
+ lower = di->bat_cap.permille - di->bm->fg_params->user_cap_limit * 10;
+ upper = di->bat_cap.permille + di->bm->fg_params->user_cap_limit * 10;
if (lower < 0)
lower = 0;
@@ -1387,7 +1388,7 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
case AB8500_FG_DISCHARGE_INIT:
/* We use the FG IRQ to work on */
di->init_cnt = 0;
- di->fg_samples = SEC_TO_SAMPLE(di->bat->fg_params->init_timer);
+ di->fg_samples = SEC_TO_SAMPLE(di->bm->fg_params->init_timer);
ab8500_fg_coulomb_counter(di, true);
ab8500_fg_discharge_state_to(di,
AB8500_FG_DISCHARGE_INITMEASURING);
@@ -1400,18 +1401,17 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
* samples to get an initial capacity.
* Then go to READOUT
*/
- sleep_time = di->bat->fg_params->init_timer;
+ sleep_time = di->bm->fg_params->init_timer;
/* Discard the first [x] seconds */
- if (di->init_cnt >
- di->bat->fg_params->init_discard_time) {
+ if (di->init_cnt > di->bm->fg_params->init_discard_time) {
ab8500_fg_calc_cap_discharge_voltage(di, true);
ab8500_fg_check_capacity_limits(di, true);
}
di->init_cnt += sleep_time;
- if (di->init_cnt > di->bat->fg_params->init_total_time)
+ if (di->init_cnt > di->bm->fg_params->init_total_time)
ab8500_fg_discharge_state_to(di,
AB8500_FG_DISCHARGE_READOUT_INIT);
@@ -1426,7 +1426,7 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
/* Intentional fallthrough */
case AB8500_FG_DISCHARGE_RECOVERY:
- sleep_time = di->bat->fg_params->recovery_sleep_timer;
+ sleep_time = di->bm->fg_params->recovery_sleep_timer;
/*
* We should check the power consumption
@@ -1438,9 +1438,9 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
if (ab8500_fg_is_low_curr(di, di->inst_curr)) {
if (di->recovery_cnt >
- di->bat->fg_params->recovery_total_time) {
+ di->bm->fg_params->recovery_total_time) {
di->fg_samples = SEC_TO_SAMPLE(
- di->bat->fg_params->accu_high_curr);
+ di->bm->fg_params->accu_high_curr);
ab8500_fg_coulomb_counter(di, true);
ab8500_fg_discharge_state_to(di,
AB8500_FG_DISCHARGE_READOUT);
@@ -1453,7 +1453,7 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
di->recovery_cnt += sleep_time;
} else {
di->fg_samples = SEC_TO_SAMPLE(
- di->bat->fg_params->accu_high_curr);
+ di->bm->fg_params->accu_high_curr);
ab8500_fg_coulomb_counter(di, true);
ab8500_fg_discharge_state_to(di,
AB8500_FG_DISCHARGE_READOUT);
@@ -1462,7 +1462,7 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
case AB8500_FG_DISCHARGE_READOUT_INIT:
di->fg_samples = SEC_TO_SAMPLE(
- di->bat->fg_params->accu_high_curr);
+ di->bm->fg_params->accu_high_curr);
ab8500_fg_coulomb_counter(di, true);
ab8500_fg_discharge_state_to(di,
AB8500_FG_DISCHARGE_READOUT);
@@ -1509,9 +1509,9 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
}
di->high_curr_cnt +=
- di->bat->fg_params->accu_high_curr;
+ di->bm->fg_params->accu_high_curr;
if (di->high_curr_cnt >
- di->bat->fg_params->high_curr_time)
+ di->bm->fg_params->high_curr_time)
di->recovery_needed = true;
ab8500_fg_calc_cap_discharge_fg(di);
@@ -1528,7 +1528,7 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
ab8500_fg_calc_cap_discharge_voltage(di, true);
di->fg_samples = SEC_TO_SAMPLE(
- di->bat->fg_params->accu_high_curr);
+ di->bm->fg_params->accu_high_curr);
ab8500_fg_coulomb_counter(di, true);
ab8500_fg_discharge_state_to(di,
AB8500_FG_DISCHARGE_READOUT);
@@ -1721,7 +1721,7 @@ static void ab8500_fg_low_bat_work(struct work_struct *work)
vbat = ab8500_fg_bat_voltage(di);
/* Check if LOW_BAT still fulfilled */
- if (vbat < di->bat->fg_params->lowbat_threshold) {
+ if (vbat < di->bm->fg_params->lowbat_threshold) {
di->flags.low_bat = true;
dev_warn(di->dev, "Battery voltage still LOW\n");
@@ -1779,8 +1779,8 @@ static int ab8500_fg_battok_init_hw_register(struct ab8500_fg *di)
int ret;
int new_val;
- sel0 = di->bat->fg_params->battok_falling_th_sel0;
- sel1 = di->bat->fg_params->battok_raising_th_sel1;
+ sel0 = di->bm->fg_params->battok_falling_th_sel0;
+ sel1 = di->bm->fg_params->battok_raising_th_sel1;
cbp_sel0 = ab8500_fg_battok_calc(di, sel0);
cbp_sel1 = ab8500_fg_battok_calc(di, sel1);
@@ -1963,7 +1963,7 @@ static int ab8500_fg_get_property(struct power_supply *psy,
di->bat_cap.max_mah);
break;
case POWER_SUPPLY_PROP_ENERGY_NOW:
- if (di->flags.batt_unknown && !di->bat->chg_unknown_bat &&
+ if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
di->flags.batt_id_received)
val->intval = ab8500_fg_convert_mah_to_uwh(di,
di->bat_cap.max_mah);
@@ -1978,21 +1978,21 @@ static int ab8500_fg_get_property(struct power_supply *psy,
val->intval = di->bat_cap.max_mah;
break;
case POWER_SUPPLY_PROP_CHARGE_NOW:
- if (di->flags.batt_unknown && !di->bat->chg_unknown_bat &&
+ if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
di->flags.batt_id_received)
val->intval = di->bat_cap.max_mah;
else
val->intval = di->bat_cap.prev_mah;
break;
case POWER_SUPPLY_PROP_CAPACITY:
- if (di->flags.batt_unknown && !di->bat->chg_unknown_bat &&
+ if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
di->flags.batt_id_received)
val->intval = 100;
else
val->intval = di->bat_cap.prev_percent;
break;
case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
- if (di->flags.batt_unknown && !di->bat->chg_unknown_bat &&
+ if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
di->flags.batt_id_received)
val->intval = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
else
@@ -2078,7 +2078,7 @@ static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data)
if (!di->flags.batt_id_received) {
const struct abx500_battery_type *b;
- b = &(di->bat->bat_type[di->bat->batt_id]);
+ b = &(di->bm->bat_type[di->bm->batt_id]);
di->flags.batt_id_received = true;
@@ -2155,7 +2155,7 @@ static int ab8500_fg_init_hw_registers(struct ab8500_fg *di)
AB8500_SYS_CTRL2_BLOCK,
AB8500_LOW_BAT_REG,
ab8500_volt_to_regval(
- di->bat->fg_params->lowbat_threshold) << 1 |
+ di->bm->fg_params->lowbat_threshold) << 1 |
LOW_BAT_ENABLE);
if (ret) {
dev_err(di->dev, "%s write failed\n", __func__);
@@ -2448,6 +2448,7 @@ static char *supply_interface[] = {
static int ab8500_fg_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
+ struct abx500_bm_data *plat = pdev->dev.platform_data;
struct ab8500_fg *di;
int i, irq;
int ret = 0;
@@ -2457,21 +2458,19 @@ static int ab8500_fg_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "%s no mem for ab8500_fg\n", __func__);
return -ENOMEM;
}
- di->bat = pdev->mfd_cell->platform_data;
- if (!di->bat) {
- if (np) {
- ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
- if (ret) {
- dev_err(&pdev->dev,
- "failed to get battery information\n");
- return ret;
- }
- } else {
- dev_err(&pdev->dev, "missing dt node for ab8500_fg\n");
- return -EINVAL;
+
+ if (!plat) {
+ dev_err(&pdev->dev, "no battery management data supplied\n");
+ return -EINVAL;
+ }
+ di->bm = plat;
+
+ if (np) {
+ ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get battery information\n");
+ return ret;
}
- } else {
- dev_info(&pdev->dev, "falling back to legacy platform data\n");
}
mutex_init(&di->cc_lock);
@@ -2491,11 +2490,11 @@ static int ab8500_fg_probe(struct platform_device *pdev)
di->fg_psy.external_power_changed = ab8500_fg_external_power_changed;
di->bat_cap.max_mah_design = MILLI_TO_MICRO *
- di->bat->bat_type[di->bat->batt_id].charge_full_design;
+ di->bm->bat_type[di->bm->batt_id].charge_full_design;
di->bat_cap.max_mah = di->bat_cap.max_mah_design;
- di->vbat_nom = di->bat->bat_type[di->bat->batt_id].nominal_voltage;
+ di->vbat_nom = di->bm->bat_type[di->bm->batt_id].nominal_voltage;
di->init_capacity = true;
@@ -2549,7 +2548,7 @@ static int ab8500_fg_probe(struct platform_device *pdev)
goto free_inst_curr_wq;
}
- di->fg_samples = SEC_TO_SAMPLE(di->bat->fg_params->init_timer);
+ di->fg_samples = SEC_TO_SAMPLE(di->bm->fg_params->init_timer);
ab8500_fg_coulomb_counter(di, true);
/* Initialize completion used to notify completion of inst current */
diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/abx500_chargalg.c
index 297089146064..8b69da0ae5af 100644
--- a/drivers/power/abx500_chargalg.c
+++ b/drivers/power/abx500_chargalg.c
@@ -207,7 +207,7 @@ enum maxim_ret {
* @chg_info: information about connected charger types
* @batt_data: data of the battery
* @susp_status: current charger suspension status
- * @bat: pointer to the abx500_bm platform data
+ * @bm: Platform specific battery management information
* @chargalg_psy: structure that holds the battery properties exposed by
* the charging algorithm
* @events: structure for information about events triggered
@@ -232,7 +232,7 @@ struct abx500_chargalg {
struct abx500_chargalg_charger_info chg_info;
struct abx500_chargalg_battery_data batt_data;
struct abx500_chargalg_suspension_status susp_status;
- struct abx500_bm_data *bat;
+ struct abx500_bm_data *bm;
struct power_supply chargalg_psy;
struct ux500_charger *ac_chg;
struct ux500_charger *usb_chg;
@@ -367,13 +367,13 @@ static void abx500_chargalg_start_safety_timer(struct abx500_chargalg *di)
case AC_CHG:
timer_expiration =
round_jiffies(jiffies +
- (di->bat->main_safety_tmr_h * 3600 * HZ));
+ (di->bm->main_safety_tmr_h * 3600 * HZ));
break;
case USB_CHG:
timer_expiration =
round_jiffies(jiffies +
- (di->bat->usb_safety_tmr_h * 3600 * HZ));
+ (di->bm->usb_safety_tmr_h * 3600 * HZ));
break;
default:
@@ -638,32 +638,32 @@ static void abx500_chargalg_start_charging(struct abx500_chargalg *di,
*/
static void abx500_chargalg_check_temp(struct abx500_chargalg *di)
{
- if (di->batt_data.temp > (di->bat->temp_low + di->t_hyst_norm) &&
- di->batt_data.temp < (di->bat->temp_high - di->t_hyst_norm)) {
+ if (di->batt_data.temp > (di->bm->temp_low + di->t_hyst_norm) &&
+ di->batt_data.temp < (di->bm->temp_high - di->t_hyst_norm)) {
/* Temp OK! */
di->events.btemp_underover = false;
di->events.btemp_lowhigh = false;
di->t_hyst_norm = 0;
di->t_hyst_lowhigh = 0;
} else {
- if (((di->batt_data.temp >= di->bat->temp_high) &&
+ if (((di->batt_data.temp >= di->bm->temp_high) &&
(di->batt_data.temp <
- (di->bat->temp_over - di->t_hyst_lowhigh))) ||
+ (di->bm->temp_over - di->t_hyst_lowhigh))) ||
((di->batt_data.temp >
- (di->bat->temp_under + di->t_hyst_lowhigh)) &&
- (di->batt_data.temp <= di->bat->temp_low))) {
+ (di->bm->temp_under + di->t_hyst_lowhigh)) &&
+ (di->batt_data.temp <= di->bm->temp_low))) {
/* TEMP minor!!!!! */
di->events.btemp_underover = false;
di->events.btemp_lowhigh = true;
- di->t_hyst_norm = di->bat->temp_hysteresis;
+ di->t_hyst_norm = di->bm->temp_hysteresis;
di->t_hyst_lowhigh = 0;
- } else if (di->batt_data.temp <= di->bat->temp_under ||
- di->batt_data.temp >= di->bat->temp_over) {
+ } else if (di->batt_data.temp <= di->bm->temp_under ||
+ di->batt_data.temp >= di->bm->temp_over) {
/* TEMP major!!!!! */
di->events.btemp_underover = true;
di->events.btemp_lowhigh = false;
di->t_hyst_norm = 0;
- di->t_hyst_lowhigh = di->bat->temp_hysteresis;
+ di->t_hyst_lowhigh = di->bm->temp_hysteresis;
} else {
/* Within hysteresis */
dev_dbg(di->dev, "Within hysteresis limit temp: %d "
@@ -682,12 +682,12 @@ static void abx500_chargalg_check_temp(struct abx500_chargalg *di)
*/
static void abx500_chargalg_check_charger_voltage(struct abx500_chargalg *di)
{
- if (di->chg_info.usb_volt > di->bat->chg_params->usb_volt_max)
+ if (di->chg_info.usb_volt > di->bm->chg_params->usb_volt_max)
di->chg_info.usb_chg_ok = false;
else
di->chg_info.usb_chg_ok = true;
- if (di->chg_info.ac_volt > di->bat->chg_params->ac_volt_max)
+ if (di->chg_info.ac_volt > di->bm->chg_params->ac_volt_max)
di->chg_info.ac_chg_ok = false;
else
di->chg_info.ac_chg_ok = true;
@@ -707,10 +707,10 @@ static void abx500_chargalg_end_of_charge(struct abx500_chargalg *di)
if (di->charge_status == POWER_SUPPLY_STATUS_CHARGING &&
di->charge_state == STATE_NORMAL &&
!di->maintenance_chg && (di->batt_data.volt >=
- di->bat->bat_type[di->bat->batt_id].termination_vol ||
+ di->bm->bat_type[di->bm->batt_id].termination_vol ||
di->events.usb_cv_active || di->events.ac_cv_active) &&
di->batt_data.avg_curr <
- di->bat->bat_type[di->bat->batt_id].termination_curr &&
+ di->bm->bat_type[di->bm->batt_id].termination_curr &&
di->batt_data.avg_curr > 0) {
if (++di->eoc_cnt >= EOC_COND_CNT) {
di->eoc_cnt = 0;
@@ -733,12 +733,12 @@ static void abx500_chargalg_end_of_charge(struct abx500_chargalg *di)
static void init_maxim_chg_curr(struct abx500_chargalg *di)
{
di->ccm.original_iset =
- di->bat->bat_type[di->bat->batt_id].normal_cur_lvl;
+ di->bm->bat_type[di->bm->batt_id].normal_cur_lvl;
di->ccm.current_iset =
- di->bat->bat_type[di->bat->batt_id].normal_cur_lvl;
- di->ccm.test_delta_i = di->bat->maxi->charger_curr_step;
- di->ccm.max_current = di->bat->maxi->chg_curr;
- di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
+ di->bm->bat_type[di->bm->batt_id].normal_cur_lvl;
+ di->ccm.test_delta_i = di->bm->maxi->charger_curr_step;
+ di->ccm.max_current = di->bm->maxi->chg_curr;
+ di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
di->ccm.level = 0;
}
@@ -755,7 +755,7 @@ static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di)
{
int delta_i;
- if (!di->bat->maxi->ena_maxi)
+ if (!di->bm->maxi->ena_maxi)
return MAXIM_RET_NOACTION;
delta_i = di->ccm.original_iset - di->batt_data.inst_curr;
@@ -766,7 +766,7 @@ static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di)
if (di->ccm.wait_cnt == 0) {
dev_dbg(di->dev, "lowering current\n");
di->ccm.wait_cnt++;
- di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
+ di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
di->ccm.max_current =
di->ccm.current_iset - di->ccm.test_delta_i;
di->ccm.current_iset = di->ccm.max_current;
@@ -791,7 +791,7 @@ static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di)
if (di->ccm.current_iset == di->ccm.original_iset)
return MAXIM_RET_NOACTION;
- di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
+ di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
di->ccm.current_iset = di->ccm.original_iset;
di->ccm.level = 0;
@@ -803,7 +803,7 @@ static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di)
di->ccm.max_current) {
if (di->ccm.condition_cnt-- == 0) {
/* Increse the iset with cco.test_delta_i */
- di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
+ di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
di->ccm.current_iset += di->ccm.test_delta_i;
di->ccm.level++;
dev_dbg(di->dev, " Maximization needed, increase"
@@ -818,7 +818,7 @@ static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di)
return MAXIM_RET_NOACTION;
}
} else {
- di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
+ di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
return MAXIM_RET_NOACTION;
}
}
@@ -838,7 +838,7 @@ static void handle_maxim_chg_curr(struct abx500_chargalg *di)
break;
case MAXIM_RET_IBAT_TOO_HIGH:
result = abx500_chargalg_update_chg_curr(di,
- di->bat->bat_type[di->bat->batt_id].normal_cur_lvl);
+ di->bm->bat_type[di->bm->batt_id].normal_cur_lvl);
if (result)
dev_err(di->dev, "failed to set chg curr\n");
break;
@@ -1210,7 +1210,7 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
* this way
*/
if (!charger_status ||
- (di->events.batt_unknown && !di->bat->chg_unknown_bat)) {
+ (di->events.batt_unknown && !di->bm->chg_unknown_bat)) {
if (di->charge_state != STATE_HANDHELD) {
di->events.safety_timer_expired = false;
abx500_chargalg_state_to(di, STATE_HANDHELD_INIT);
@@ -1394,8 +1394,8 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
case STATE_NORMAL_INIT:
abx500_chargalg_start_charging(di,
- di->bat->bat_type[di->bat->batt_id].normal_vol_lvl,
- di->bat->bat_type[di->bat->batt_id].normal_cur_lvl);
+ di->bm->bat_type[di->bm->batt_id].normal_vol_lvl,
+ di->bm->bat_type[di->bm->batt_id].normal_cur_lvl);
abx500_chargalg_state_to(di, STATE_NORMAL);
abx500_chargalg_start_safety_timer(di);
abx500_chargalg_stop_maintenance_timer(di);
@@ -1411,7 +1411,7 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
handle_maxim_chg_curr(di);
if (di->charge_status == POWER_SUPPLY_STATUS_FULL &&
di->maintenance_chg) {
- if (di->bat->no_maintenance)
+ if (di->bm->no_maintenance)
abx500_chargalg_state_to(di,
STATE_WAIT_FOR_RECHARGE_INIT);
else
@@ -1429,7 +1429,7 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
case STATE_WAIT_FOR_RECHARGE:
if (di->batt_data.volt <=
- di->bat->bat_type[di->bat->batt_id].recharge_vol) {
+ di->bm->bat_type[di->bm->batt_id].recharge_vol) {
if (di->rch_cnt-- == 0)
abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
} else
@@ -1439,13 +1439,13 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
case STATE_MAINTENANCE_A_INIT:
abx500_chargalg_stop_safety_timer(di);
abx500_chargalg_start_maintenance_timer(di,
- di->bat->bat_type[
- di->bat->batt_id].maint_a_chg_timer_h);
+ di->bm->bat_type[
+ di->bm->batt_id].maint_a_chg_timer_h);
abx500_chargalg_start_charging(di,
- di->bat->bat_type[
- di->bat->batt_id].maint_a_vol_lvl,
- di->bat->bat_type[
- di->bat->batt_id].maint_a_cur_lvl);
+ di->bm->bat_type[
+ di->bm->batt_id].maint_a_vol_lvl,
+ di->bm->bat_type[
+ di->bm->batt_id].maint_a_cur_lvl);
abx500_chargalg_state_to(di, STATE_MAINTENANCE_A);
power_supply_changed(&di->chargalg_psy);
/* Intentional fallthrough*/
@@ -1459,13 +1459,13 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
case STATE_MAINTENANCE_B_INIT:
abx500_chargalg_start_maintenance_timer(di,
- di->bat->bat_type[
- di->bat->batt_id].maint_b_chg_timer_h);
+ di->bm->bat_type[
+ di->bm->batt_id].maint_b_chg_timer_h);
abx500_chargalg_start_charging(di,
- di->bat->bat_type[
- di->bat->batt_id].maint_b_vol_lvl,
- di->bat->bat_type[
- di->bat->batt_id].maint_b_cur_lvl);
+ di->bm->bat_type[
+ di->bm->batt_id].maint_b_vol_lvl,
+ di->bm->bat_type[
+ di->bm->batt_id].maint_b_cur_lvl);
abx500_chargalg_state_to(di, STATE_MAINTENANCE_B);
power_supply_changed(&di->chargalg_psy);
/* Intentional fallthrough*/
@@ -1479,10 +1479,10 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
case STATE_TEMP_LOWHIGH_INIT:
abx500_chargalg_start_charging(di,
- di->bat->bat_type[
- di->bat->batt_id].low_high_vol_lvl,
- di->bat->bat_type[
- di->bat->batt_id].low_high_cur_lvl);
+ di->bm->bat_type[
+ di->bm->batt_id].low_high_vol_lvl,
+ di->bm->bat_type[
+ di->bm->batt_id].low_high_cur_lvl);
abx500_chargalg_stop_maintenance_timer(di);
di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
abx500_chargalg_state_to(di, STATE_TEMP_LOWHIGH);
@@ -1543,11 +1543,11 @@ static void abx500_chargalg_periodic_work(struct work_struct *work)
if (di->chg_info.conn_chg)
queue_delayed_work(di->chargalg_wq,
&di->chargalg_periodic_work,
- di->bat->interval_charging * HZ);
+ di->bm->interval_charging * HZ);
else
queue_delayed_work(di->chargalg_wq,
&di->chargalg_periodic_work,
- di->bat->interval_not_charging * HZ);
+ di->bm->interval_not_charging * HZ);
}
/**
@@ -1614,7 +1614,7 @@ static int abx500_chargalg_get_property(struct power_supply *psy,
if (di->events.batt_ovv) {
val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
} else if (di->events.btemp_underover) {
- if (di->batt_data.temp <= di->bat->temp_under)
+ if (di->batt_data.temp <= di->bm->temp_under)
val->intval = POWER_SUPPLY_HEALTH_COLD;
else
val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
@@ -1806,6 +1806,7 @@ static char *supply_interface[] = {
static int abx500_chargalg_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
+ struct abx500_bm_data *plat = pdev->dev.platform_data;
struct abx500_chargalg *di;
int ret = 0;
@@ -1814,21 +1815,19 @@ static int abx500_chargalg_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "%s no mem for ab8500_chargalg\n", __func__);
return -ENOMEM;
}
- di->bat = pdev->mfd_cell->platform_data;
- if (!di->bat) {
- if (np) {
- ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
- if (ret) {
- dev_err(&pdev->dev,
- "failed to get battery information\n");
- return ret;
- }
- } else {
- dev_err(&pdev->dev, "missing dt node for ab8500_chargalg\n");
- return -EINVAL;
+
+ if (!plat) {
+ dev_err(&pdev->dev, "no battery management data supplied\n");
+ return -EINVAL;
+ }
+ di->bm = plat;
+
+ if (np) {
+ ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get battery information\n");
+ return ret;
}
- } else {
- dev_info(&pdev->dev, "falling back to legacy platform data\n");
}
/* get device struct */