diff options
Diffstat (limited to 'drivers/pwm/Kconfig')
| -rw-r--r-- | drivers/pwm/Kconfig | 736 |
1 files changed, 682 insertions, 54 deletions
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index 75840b5cea6d..bf2d101f67a1 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig PWM bool "Pulse-Width Modulation (PWM) Support" help @@ -28,9 +29,23 @@ menuconfig PWM if PWM -config PWM_SYSFS - bool - default y if SYSFS +config PWM_DEBUG + bool "PWM lowlevel drivers additional checks and debug messages" + depends on DEBUG_KERNEL + help + This option enables some additional checks to help lowlevel driver + authors to get their callbacks implemented correctly. + It is expected to introduce some runtime overhead and diagnostic + output to the kernel log, so only enable while working on a driver. + +config PWM_PROVIDE_GPIO + bool "Provide a GPIO chip for each PWM chip" + depends on GPIOLIB + help + Most PWMs can emit both a constant active high and a constant active + low signal and so they can be used as GPIO. Say Y here to let each + PWM chip provide a GPIO chip and so be easily plugged into consumers + that know how to handle GPIOs but not PWMs. config PWM_AB8500 tristate "AB8500 PWM support" @@ -41,9 +56,70 @@ config PWM_AB8500 To compile this driver as a module, choose M here: the module will be called pwm-ab8500. +config PWM_ADP5585 + tristate "ADP5585 PWM support" + depends on MFD_ADP5585 + help + This option enables support for the PWM function found in the Analog + Devices ADP5585. + +config PWM_AIROHA + tristate "Airoha PWM support" + depends on ARCH_AIROHA || COMPILE_TEST + select REGMAP_MMIO + help + Generic PWM framework driver for Airoha SoC. + + To compile this driver as a module, choose M here: the module + will be called pwm-airoha. + +config PWM_APPLE + tristate "Apple SoC PWM support" + depends on ARCH_APPLE || COMPILE_TEST + help + Generic PWM framework driver for PWM controller present on + Apple SoCs + + Say Y here if you have an ARM Apple laptop, otherwise say N + + To compile this driver as a module, choose M here: the module + will be called pwm-apple. + +config PWM_ARGON_FAN_HAT + tristate "Argon40 Fan HAT support" + depends on I2C && OF + help + Generic PWM framework driver for Argon40 Fan HAT. + + To compile this driver as a module, choose M here: the module + will be called pwm-argon-fan-hat. + +config PWM_ATMEL + tristate "Atmel PWM support" + depends on ARCH_AT91 || COMPILE_TEST + depends on HAS_IOMEM && OF + help + Generic PWM framework driver for Atmel SoC. + + To compile this driver as a module, choose M here: the module + will be called pwm-atmel. + +config PWM_ATMEL_HLCDC_PWM + tristate "Atmel HLCDC PWM support" + depends on MFD_ATMEL_HLCDC + depends on HAVE_CLK + help + Generic PWM framework driver for the PWM output of the HLCDC + (Atmel High-end LCD Controller). This PWM output is mainly used + to control the LCD backlight. + + To compile this driver as a module, choose M here: the module + will be called pwm-atmel-hlcdc. + config PWM_ATMEL_TCB tristate "Atmel TC Block PWM support" - depends on ATMEL_TCLIB && OF + depends on OF + select REGMAP_MMIO help Generic PWM framework driver for Atmel Timer Counter Block. @@ -53,37 +129,295 @@ config PWM_ATMEL_TCB To compile this driver as a module, choose M here: the module will be called pwm-atmel-tcb. -config PWM_BFIN - tristate "Blackfin PWM support" - depends on BFIN_GPTIMERS +config PWM_AXI_PWMGEN + tristate "Analog Devices AXI PWM generator" + depends on MICROBLAZE || NIOS2 || ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_INTEL_SOCFPGA || COMPILE_TEST + select REGMAP_MMIO + help + This enables support for the Analog Devices AXI PWM generator. + + This is a configurable PWM generator with variable pulse width and + period. + + To compile this driver as a module, choose M here: the module will be + called pwm-axi-pwmgen. + +config PWM_BCM2835 + tristate "BCM2835 PWM support" + depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST + depends on HAS_IOMEM + help + PWM framework driver for BCM2835 controller (Raspberry Pi) + + To compile this driver as a module, choose M here: the module + will be called pwm-bcm2835. + +config PWM_BCM_IPROC + tristate "iProc PWM support" + depends on ARCH_BCM_IPROC || COMPILE_TEST + depends on COMMON_CLK && HAS_IOMEM + default ARCH_BCM_IPROC + help + Generic PWM framework driver for Broadcom iProc PWM block. This + block is used in Broadcom iProc SoC's. + + To compile this driver as a module, choose M here: the module + will be called pwm-bcm-iproc. + +config PWM_BCM_KONA + tristate "Kona PWM support" + depends on ARCH_BCM_MOBILE || ARCH_BCM_CYGNUS || COMPILE_TEST + depends on HAVE_CLK && HAS_IOMEM + default ARCH_BCM_MOBILE || ARCH_BCM_CYGNUS + help + Generic PWM framework driver for Broadcom Kona PWM block. + + To compile this driver as a module, choose M here: the module + will be called pwm-bcm-kona. + +config PWM_BERLIN + tristate "Marvell Berlin PWM support" + depends on ARCH_BERLIN || COMPILE_TEST + depends on HAS_IOMEM + help + PWM framework driver for Marvell Berlin SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-berlin. + +config PWM_BRCMSTB + tristate "Broadcom STB PWM support" + depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST + depends on HAS_IOMEM + help + Generic PWM framework driver for the Broadcom Set-top-Box + SoCs (BCM7xxx). + + To compile this driver as a module, choose M Here: the module + will be called pwm-brcmstb.c. + +config PWM_CLK + tristate "Clock based PWM support" + depends on HAVE_CLK || COMPILE_TEST + help + Generic PWM framework driver for outputs that can be + muxed to clocks. + + To compile this driver as a module, choose M here: the module + will be called pwm-clk. + +config PWM_CLPS711X + tristate "CLPS711X PWM support" + depends on ARCH_CLPS711X || COMPILE_TEST + depends on HAS_IOMEM + help + Generic PWM framework driver for Cirrus Logic CLPS711X. + + To compile this driver as a module, choose M here: the module + will be called pwm-clps711x. + +config PWM_CRC + tristate "Intel Crystalcove (CRC) PWM support" + depends on INTEL_SOC_PMIC + help + Generic PWM framework driver for Crystalcove (CRC) PMIC based PWM + control. + +config PWM_CROS_EC + tristate "ChromeOS EC PWM driver" + depends on CROS_EC + help + PWM driver for exposing a PWM attached to the ChromeOS Embedded + Controller. + +config PWM_DWC_CORE + tristate + depends on HAS_IOMEM + help + PWM driver for Synopsys DWC PWM Controller. + + To compile this driver as a module, build the dependecies as + modules, this will be called pwm-dwc-core. + +config PWM_DWC + tristate "DesignWare PWM Controller (PCI bus)" + depends on HAS_IOMEM && PCI + select PWM_DWC_CORE + help + PWM driver for Synopsys DWC PWM Controller attached to a PCI bus. + + To compile this driver as a module, choose M here: the module + will be called pwm-dwc. + +config PWM_EP93XX + tristate "Cirrus Logic EP93xx PWM support" + depends on ARCH_EP93XX || COMPILE_TEST + depends on HAS_IOMEM + help + Generic PWM framework driver for Cirrus Logic EP93xx. + + To compile this driver as a module, choose M here: the module + will be called pwm-ep93xx. + +config PWM_FSL_FTM + tristate "Freescale FlexTimer Module (FTM) PWM support" + depends on HAS_IOMEM + depends on OF + select REGMAP_MMIO + help + Generic FTM PWM framework driver for Freescale VF610 and + Layerscape LS-1 SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-fsl-ftm. + +config PWM_GPIO + tristate "GPIO PWM support" + depends on GPIOLIB + depends on HIGH_RES_TIMERS + help + Generic PWM framework driver for software PWM toggling a GPIO pin + from kernel high-resolution timers. + + To compile this driver as a module, choose M here: the module + will be called pwm-gpio. + +config PWM_HIBVT + tristate "HiSilicon BVT PWM support" + depends on ARCH_HISI || COMPILE_TEST + depends on HAS_IOMEM + help + Generic PWM framework driver for HiSilicon BVT SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-hibvt. + +config PWM_IMG + tristate "Imagination Technologies PWM driver" + depends on HAS_IOMEM + depends on MFD_SYSCON + depends on COMMON_CLK + depends on MIPS || COMPILE_TEST + help + Generic PWM framework driver for Imagination Technologies + PWM block which supports 4 channels. + + To compile this driver as a module, choose M here: the module + will be called pwm-img + +config PWM_IMX1 + tristate "i.MX1 PWM support" + depends on ARCH_MXC || COMPILE_TEST + depends on HAS_IOMEM help - Generic PWM framework driver for Blackfin. + Generic PWM framework driver for i.MX1 and i.MX21 To compile this driver as a module, choose M here: the module - will be called pwm-bfin. + will be called pwm-imx1. -config PWM_IMX - tristate "i.MX PWM support" - depends on ARCH_MXC +config PWM_IMX27 + tristate "i.MX27 PWM support" + depends on ARCH_MXC || COMPILE_TEST + depends on HAS_IOMEM help - Generic PWM framework driver for i.MX. + Generic PWM framework driver for i.MX27 and later i.MX SoCs. To compile this driver as a module, choose M here: the module - will be called pwm-imx. + will be called pwm-imx27. + +config PWM_IMX_TPM + tristate "i.MX TPM PWM support" + depends on ARCH_MXC || COMPILE_TEST + depends on HAVE_CLK && HAS_IOMEM + help + Generic PWM framework driver for i.MX7ULP TPM module, TPM's full + name is Low Power Timer/Pulse Width Modulation Module. + + To compile this driver as a module, choose M here: the module + will be called pwm-imx-tpm. + +config PWM_INTEL_LGM + tristate "Intel LGM PWM support" + depends on HAS_IOMEM + depends on (OF && X86) || COMPILE_TEST + select REGMAP_MMIO + help + Generic PWM fan controller driver for LGM SoC. + + To compile this driver as a module, choose M here: the module + will be called pwm-intel-lgm. + +config PWM_IQS620A + tristate "Azoteq IQS620A PWM support" + depends on MFD_IQS62X || COMPILE_TEST + help + Generic PWM framework driver for the Azoteq IQS620A multi-function + sensor. + + To compile this driver as a module, choose M here: the module will + be called pwm-iqs620a. config PWM_JZ4740 - tristate "Ingenic JZ4740 PWM support" - depends on MACH_JZ4740 + tristate "Ingenic JZ47xx PWM support" + depends on MACH_INGENIC || COMPILE_TEST + depends on COMMON_CLK && OF + select MFD_SYSCON help - Generic PWM framework driver for Ingenic JZ4740 based + Generic PWM framework driver for Ingenic JZ47xx based machines. To compile this driver as a module, choose M here: the module will be called pwm-jz4740. +config PWM_KEEMBAY + tristate "Intel Keem Bay PWM driver" + depends on ARCH_KEEMBAY || COMPILE_TEST + depends on COMMON_CLK && HAS_IOMEM + help + The platform driver for Intel Keem Bay PWM controller. + + To compile this driver as a module, choose M here: the module + will be called pwm-keembay. + +config PWM_LOONGSON + tristate "Loongson PWM support" + depends on MACH_LOONGSON64 || COMPILE_TEST + depends on COMMON_CLK + help + Generic PWM framework driver for Loongson family. + It can be found on Loongson-2K series cpus and Loongson LS7A + bridge chips. + + To compile this driver as a module, choose M here: the module + will be called pwm-loongson. + +config PWM_LP3943 + tristate "TI/National Semiconductor LP3943 PWM support" + depends on MFD_LP3943 + help + Generic PWM framework driver for LP3943 which supports two PWM + channels. + + To compile this driver as a module, choose M here: the module + will be called pwm-lp3943. + +config PWM_LPC18XX_SCT + tristate "LPC18xx/43xx PWM/SCT support" + depends on ARCH_LPC18XX || COMPILE_TEST + depends on HAS_IOMEM + help + Generic PWM framework driver for NXP LPC18xx PWM/SCT which + supports 16 channels. + A maximum of 15 channels can be requested simultaneously and + must have the same period. + + To compile this driver as a module, choose M here: the module + will be called pwm-lpc18xx-sct. + config PWM_LPC32XX tristate "LPC32XX PWM support" - depends on ARCH_LPC32XX + depends on ARCH_LPC32XX || COMPILE_TEST + depends on HAS_IOMEM help Generic PWM framework driver for LPC32XX. The LPC32XX SOC has two PWM controllers. @@ -91,9 +425,100 @@ config PWM_LPC32XX To compile this driver as a module, choose M here: the module will be called pwm-lpc32xx. +config PWM_LPSS + depends on HAS_IOMEM + tristate + +config PWM_LPSS_PCI + tristate "Intel LPSS PWM PCI driver" + depends on X86 || COMPILE_TEST + depends on HAS_IOMEM && PCI + select PWM_LPSS + help + The PCI driver for Intel Low Power Subsystem PWM controller. + + To compile this driver as a module, choose M here: the module + will be called pwm-lpss-pci. + +config PWM_LPSS_PLATFORM + tristate "Intel LPSS PWM platform driver" + depends on (X86 && ACPI) || COMPILE_TEST + depends on HAS_IOMEM + select PWM_LPSS + help + The platform driver for Intel Low Power Subsystem PWM controller. + + To compile this driver as a module, choose M here: the module + will be called pwm-lpss-platform. + +config PWM_MAX7360 + tristate "MAX7360 PWMs" + depends on MFD_MAX7360 + help + PWM driver for Maxim Integrated MAX7360 multifunction device, with + support for up to 8 PWM outputs. + + To compile this driver as a module, choose M here: the module + will be called pwm-max7360. + +config PWM_MC33XS2410 + tristate "MC33XS2410 PWM support" + depends on OF + depends on SPI + select AUXILIARY_BUS + help + NXP MC33XS2410 high-side switch driver. The MC33XS2410 is a four + channel high-side switch. The device is operational from 3.0 V + to 60 V. The device is controlled by SPI port for configuration. + + To compile this driver as a module, choose M here: the module + will be called pwm-mc33xs2410. + +config PWM_MEDIATEK + tristate "MediaTek PWM support" + depends on ARCH_MEDIATEK || RALINK || COMPILE_TEST + depends on HAS_IOMEM + help + Generic PWM framework driver for Mediatek ARM SoC. + + To compile this driver as a module, choose M here: the module + will be called pwm-mediatek. + +config PWM_MESON + tristate "Amlogic Meson PWM driver" + depends on ARCH_MESON || COMPILE_TEST + depends on COMMON_CLK && HAS_IOMEM + help + The platform driver for Amlogic Meson PWM controller. + + To compile this driver as a module, choose M here: the module + will be called pwm-meson. + +config PWM_MICROCHIP_CORE + tristate "Microchip corePWM PWM support" + depends on ARCH_MICROCHIP_POLARFIRE || COMPILE_TEST + depends on HAS_IOMEM && OF + help + PWM driver for Microchip FPGA soft IP core. + + To compile this driver as a module, choose M here: the module + will be called pwm-microchip-core. + +config PWM_MTK_DISP + tristate "MediaTek display PWM driver" + depends on ARCH_MEDIATEK || COMPILE_TEST + depends on HAS_IOMEM + help + Generic PWM framework driver for MediaTek disp-pwm device. + The PWM is used to control the backlight brightness for display. + + To compile this driver as a module, choose M here: the module + will be called pwm-mtk-disp. + config PWM_MXS tristate "Freescale MXS PWM support" - depends on ARCH_MXS && OF + depends on ARCH_MXS || COMPILE_TEST + depends on HAS_IOMEM && OF select STMP_DEVICE help Generic PWM framework driver for Freescale MXS. @@ -101,36 +526,90 @@ config PWM_MXS To compile this driver as a module, choose M here: the module will be called pwm-mxs. -config PWM_PCA9685 - tristate "NXP PCA9685 PWM driver" - depends on OF && REGMAP_I2C +config PWM_NTXEC + tristate "Netronix embedded controller PWM support" + depends on MFD_NTXEC help - Generic PWM framework driver for NXP PCA9685 LED controller. + Say yes here if you want to support the PWM output of the embedded + controller found in certain e-book readers designed by the original + design manufacturer Netronix. + +config PWM_OMAP_DMTIMER + tristate "OMAP Dual-Mode Timer PWM support" + depends on OF + depends on OMAP_DM_TIMER || COMPILE_TEST + help + Generic PWM framework driver for OMAP Dual-Mode Timer PWM output To compile this driver as a module, choose M here: the module - will be called pwm-pca9685. + will be called pwm-omap-dmtimer -config PWM_PUV3 - tristate "PKUnity NetBook-0916 PWM support" - depends on ARCH_PUV3 +config PWM_PCA9685 + tristate "NXP PCA9685 PWM driver" + depends on I2C + select REGMAP_I2C help - Generic PWM framework driver for PKUnity NetBook-0916. + Generic PWM framework driver for NXP PCA9685 LED controller. To compile this driver as a module, choose M here: the module - will be called pwm-puv3. + will be called pwm-pca9685. config PWM_PXA tristate "PXA PWM support" - depends on ARCH_PXA + depends on ARCH_PXA || ARCH_MMP || ARCH_SPACEMIT || COMPILE_TEST + depends on HAS_IOMEM help Generic PWM framework driver for PXA. To compile this driver as a module, choose M here: the module will be called pwm-pxa. +config PWM_RASPBERRYPI_POE + tristate "Raspberry Pi Firmware PoE Hat PWM support" + # Make sure not 'y' when RASPBERRYPI_FIRMWARE is 'm'. This can only + # happen when COMPILE_TEST=y, hence the added !RASPBERRYPI_FIRMWARE. + depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) + help + Enable Raspberry Pi firmware controller PWM bus used to control the + official RPI PoE hat + +config PWM_RENESAS_RCAR + tristate "Renesas R-Car PWM support" + depends on ARCH_RENESAS || COMPILE_TEST + depends on HAS_IOMEM + help + This driver exposes the PWM Timer controller found in Renesas + R-Car chips through the PWM API. + + To compile this driver as a module, choose M here: the module + will be called pwm-rcar. + +config PWM_RENESAS_RZG2L_GPT + tristate "Renesas RZ/G2L General PWM Timer support" + depends on ARCH_RZG2L || COMPILE_TEST + depends on HAS_IOMEM + help + This driver exposes the General PWM Timer controller found in Renesas + RZ/G2L like chips through the PWM API. + + To compile this driver as a module, choose M here: the module + will be called pwm-rzg2l-gpt. + +config PWM_RENESAS_RZ_MTU3 + tristate "Renesas RZ/G2L MTU3a PWM Timer support" + depends on RZ_MTU3 + depends on HAS_IOMEM + help + This driver exposes the MTU3a PWM Timer controller found in Renesas + RZ/G2L like chips through the PWM API. + + To compile this driver as a module, choose M here: the module + will be called pwm-rz-mtu3. + config PWM_RENESAS_TPU tristate "Renesas TPU PWM support" - depends on ARCH_SHMOBILE + depends on ARCH_RENESAS || COMPILE_TEST + depends on HAS_IOMEM help This driver exposes the Timer Pulse Unit (TPU) PWM controller found in Renesas chips through the PWM API. @@ -138,19 +617,61 @@ config PWM_RENESAS_TPU To compile this driver as a module, choose M here: the module will be called pwm-renesas-tpu. +config PWM_ROCKCHIP + tristate "Rockchip PWM support" + depends on ARCH_ROCKCHIP || COMPILE_TEST + depends on HAS_IOMEM + help + Generic PWM framework driver for the PWM controller found on + Rockchip SoCs. + config PWM_SAMSUNG tristate "Samsung PWM support" - depends on PLAT_SAMSUNG + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST + depends on HAS_IOMEM help - Generic PWM framework driver for Samsung. + Generic PWM framework driver for Samsung S3C24xx, S3C64xx, S5Pv210 + and Exynos SoCs. + Choose Y here only if you build for such Samsung SoC. To compile this driver as a module, choose M here: the module will be called pwm-samsung. +config PWM_SIFIVE + tristate "SiFive PWM support" + depends on OF + depends on COMMON_CLK && HAS_IOMEM + depends on ARCH_SIFIVE || COMPILE_TEST + help + Generic PWM framework driver for SiFive SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-sifive. + +config PWM_SL28CPLD + tristate "Kontron sl28cpld PWM support" + depends on MFD_SL28CPLD || COMPILE_TEST + help + Generic PWM framework driver for board management controller + found on the Kontron sl28 CPLD. + + To compile this driver as a module, choose M here: the module + will be called pwm-sl28cpld. + +config PWM_SOPHGO_SG2042 + tristate "Sophgo SG2042 PWM support" + depends on ARCH_SOPHGO || COMPILE_TEST + help + PWM driver for the PWM controller on Sophgo SG2042 SoC. The PWM + controller supports outputing 4 channels of PWM waveforms. + + To compile this driver as a module, choose M here: the module + will be called pwm_sophgo_sg2042. + config PWM_SPEAR tristate "STMicroelectronics SPEAr PWM support" - depends on PLAT_SPEAR - depends on OF + depends on PLAT_SPEAR || COMPILE_TEST + depends on HAS_IOMEM && OF help Generic PWM framework driver for the PWM controller on ST SPEAr SoCs. @@ -158,9 +679,78 @@ config PWM_SPEAR To compile this driver as a module, choose M here: the module will be called pwm-spear. +config PWM_SPRD + tristate "Spreadtrum PWM support" + depends on ARCH_SPRD || COMPILE_TEST + depends on HAS_IOMEM + help + Generic PWM framework driver for the PWM controller on + Spreadtrum SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-sprd. + +config PWM_STI + tristate "STiH4xx PWM support" + depends on ARCH_STI || COMPILE_TEST + depends on HAS_IOMEM && OF + help + Generic PWM framework driver for STiH4xx SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-sti. + +config PWM_STM32 + tristate "STMicroelectronics STM32 PWM" + depends on MFD_STM32_TIMERS || COMPILE_TEST + help + Generic PWM framework driver for STM32 SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-stm32. + +config PWM_STM32_LP + tristate "STMicroelectronics STM32 PWM LP" + depends on MFD_STM32_LPTIMER || COMPILE_TEST + help + Generic PWM framework driver for STMicroelectronics STM32 SoCs + with Low-Power Timer (LPTIM). + + To compile this driver as a module, choose M here: the module + will be called pwm-stm32-lp. + +config PWM_STMPE + tristate "STMPE expander PWM export" + depends on MFD_STMPE + help + This enables support for the PWMs found in the STMPE I/O + expanders. + +config PWM_SUN4I + tristate "Allwinner PWM support" + depends on ARCH_SUNXI || COMPILE_TEST + depends on HAS_IOMEM && COMMON_CLK + help + Generic PWM framework driver for Allwinner SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-sun4i. + +config PWM_SUNPLUS + tristate "Sunplus PWM support" + depends on ARCH_SUNPLUS || COMPILE_TEST + depends on HAS_IOMEM && OF + help + Generic PWM framework driver for the PWM controller on + Sunplus SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-sunplus. + config PWM_TEGRA tristate "NVIDIA Tegra PWM support" - depends on ARCH_TEGRA + depends on ARCH_TEGRA || COMPILE_TEST + depends on HAS_IOMEM help Generic PWM framework driver for the PWFM controller found on NVIDIA Tegra SoCs. @@ -168,35 +758,37 @@ config PWM_TEGRA To compile this driver as a module, choose M here: the module will be called pwm-tegra. -config PWM_TIECAP +config PWM_TH1520 + tristate "TH1520 PWM support" + depends on RUST + select RUST_PWM_ABSTRACTIONS + help + This option enables the driver for the PWM controller found on the + T-HEAD TH1520 SoC. + + To compile this driver as a module, choose M here; the module + will be called pwm-th1520. If you are unsure, say N. + +config PWM_TIECAP tristate "ECAP PWM support" - depends on SOC_AM33XX || ARCH_DAVINCI_DA8XX + depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST + depends on HAS_IOMEM help - PWM driver support for the ECAP APWM controller found on AM33XX - TI SOC + PWM driver support for the ECAP APWM controller found on TI SOCs To compile this driver as a module, choose M here: the module will be called pwm-tiecap. -config PWM_TIEHRPWM +config PWM_TIEHRPWM tristate "EHRPWM PWM support" - depends on SOC_AM33XX || ARCH_DAVINCI_DA8XX + depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_K3 || COMPILE_TEST + depends on HAS_IOMEM help - PWM driver support for the EHRPWM controller found on AM33XX - TI SOC + PWM driver support for the EHRPWM controller found on TI SOCs To compile this driver as a module, choose M here: the module will be called pwm-tiehrpwm. -config PWM_TIPWMSS - bool - default y if SOC_AM33XX && (PWM_TIECAP || PWM_TIEHRPWM) - help - PWM Subsystem driver support for AM33xx SOC. - - PWM submodules require PWM config space access from submodule - drivers and require common parent driver support. - config PWM_TWL tristate "TWL4030/6030 PWM support" depends on TWL4030_CORE @@ -215,13 +807,49 @@ config PWM_TWL_LED To compile this driver as a module, choose M here: the module will be called pwm-twl-led. +config PWM_VISCONTI + tristate "Toshiba Visconti PWM support" + depends on ARCH_VISCONTI || COMPILE_TEST + help + PWM Subsystem driver support for Toshiba Visconti SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-visconti. + config PWM_VT8500 tristate "vt8500 PWM support" - depends on ARCH_VT8500 + depends on ARCH_VT8500 || COMPILE_TEST + depends on HAS_IOMEM help Generic PWM framework driver for vt8500. To compile this driver as a module, choose M here: the module will be called pwm-vt8500. +config PWM_XILINX + tristate "Xilinx AXI Timer PWM support" + depends on OF_ADDRESS + depends on COMMON_CLK + select REGMAP_MMIO + help + PWM driver for Xilinx LogiCORE IP AXI timers. This timer is + typically a soft core which may be present in Xilinx FPGAs. + This device may also be present in Microblaze soft processors. + If you don't have this IP in your design, choose N. + + To compile this driver as a module, choose M here: the module + will be called pwm-xilinx. + + config RUST_PWM_ABSTRACTIONS + bool + depends on RUST + help + This option enables the safe Rust abstraction layer for the PWM + subsystem. It provides idiomatic wrappers and traits necessary for + writing PWM controller drivers in Rust. + + The abstractions handle resource management (like memory and reference + counting) and provide safe interfaces to the underlying C core, + allowing driver logic to be written in safe Rust. + endif |