diff options
Diffstat (limited to 'drivers/pwm/pwm-stm32.c')
| -rw-r--r-- | drivers/pwm/pwm-stm32.c | 954 |
1 files changed, 954 insertions, 0 deletions
diff --git a/drivers/pwm/pwm-stm32.c b/drivers/pwm/pwm-stm32.c new file mode 100644 index 000000000000..2594fb771b04 --- /dev/null +++ b/drivers/pwm/pwm-stm32.c @@ -0,0 +1,954 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) STMicroelectronics 2016 + * + * Author: Gerald Baeza <gerald.baeza@st.com> + * + * Inspired by timer-stm32.c from Maxime Coquelin + * pwm-atmel.c from Bo Shen + */ + +#include <linux/bitfield.h> +#include <linux/mfd/stm32-timers.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/pinctrl/consumer.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> + +#define CCMR_CHANNEL_SHIFT 8 +#define CCMR_CHANNEL_MASK 0xFF +#define MAX_BREAKINPUT 2 +#define STM32_MAX_PWM_OUTPUT 4 + +struct stm32_breakinput { + u32 index; + u32 level; + u32 filter; +}; + +struct stm32_pwm { + struct mutex lock; /* protect pwm config/enable */ + struct clk *clk; + struct regmap *regmap; + u32 max_arr; + bool have_complementary_output; + struct stm32_breakinput breakinputs[MAX_BREAKINPUT]; + unsigned int num_breakinputs; + u32 capture[4] ____cacheline_aligned; /* DMA'able buffer */ +}; + +static inline struct stm32_pwm *to_stm32_pwm_dev(struct pwm_chip *chip) +{ + return pwmchip_get_drvdata(chip); +} + +static u32 active_channels(struct stm32_pwm *dev) +{ + u32 ccer; + + regmap_read(dev->regmap, TIM_CCER, &ccer); + + return ccer & TIM_CCER_CCXE; +} + +struct stm32_pwm_waveform { + u32 ccer; + u32 psc; + u32 arr; + u32 ccr; +}; + +static int stm32_pwm_round_waveform_tohw(struct pwm_chip *chip, + struct pwm_device *pwm, + const struct pwm_waveform *wf, + void *_wfhw) +{ + struct stm32_pwm_waveform *wfhw = _wfhw; + struct stm32_pwm *priv = to_stm32_pwm_dev(chip); + unsigned int ch = pwm->hwpwm; + unsigned long rate; + u64 ccr, duty; + int ret; + + if (wf->period_length_ns == 0) { + *wfhw = (struct stm32_pwm_waveform){ + .ccer = 0, + }; + + return 0; + } + + ret = clk_enable(priv->clk); + if (ret) + return ret; + + wfhw->ccer = TIM_CCER_CCxE(ch + 1); + if (priv->have_complementary_output) + wfhw->ccer |= TIM_CCER_CCxNE(ch + 1); + + rate = clk_get_rate(priv->clk); + + if (active_channels(priv) & ~TIM_CCER_CCxE(ch + 1)) { + u64 arr; + + /* + * Other channels are already enabled, so the configured PSC and + * ARR must be used for this channel, too. + */ + ret = regmap_read(priv->regmap, TIM_PSC, &wfhw->psc); + if (ret) + goto out; + + ret = regmap_read(priv->regmap, TIM_ARR, &wfhw->arr); + if (ret) + goto out; + + arr = mul_u64_u64_div_u64(wf->period_length_ns, rate, + (u64)NSEC_PER_SEC * (wfhw->psc + 1)); + if (arr <= wfhw->arr) { + /* + * requested period is smaller than the currently + * configured and unchangable period, report back the smallest + * possible period, i.e. the current state and return 1 + * to indicate the wrong rounding direction. + */ + ret = 1; + } + + } else { + /* + * .probe() asserted that clk_get_rate() is not bigger than 1 GHz, so + * the calculations here won't overflow. + * First we need to find the minimal value for prescaler such that + * + * period_ns * clkrate + * ------------------------------ < max_arr + 1 + * NSEC_PER_SEC * (prescaler + 1) + * + * This equation is equivalent to + * + * period_ns * clkrate + * ---------------------------- < prescaler + 1 + * NSEC_PER_SEC * (max_arr + 1) + * + * Using integer division and knowing that the right hand side is + * integer, this is further equivalent to + * + * (period_ns * clkrate) // (NSEC_PER_SEC * (max_arr + 1)) ≤ prescaler + */ + u64 psc = mul_u64_u64_div_u64(wf->period_length_ns, rate, + (u64)NSEC_PER_SEC * ((u64)priv->max_arr + 1)); + u64 arr; + + wfhw->psc = min_t(u64, psc, MAX_TIM_PSC); + + arr = mul_u64_u64_div_u64(wf->period_length_ns, rate, + (u64)NSEC_PER_SEC * (wfhw->psc + 1)); + if (!arr) { + /* + * requested period is too small, report back the smallest + * possible period, i.e. ARR = 0. The only valid CCR + * value is then zero, too. + */ + wfhw->arr = 0; + wfhw->ccr = 0; + ret = 1; + goto out; + } + + /* + * ARR is limited intentionally to values less than + * priv->max_arr to allow 100% duty cycle. + */ + wfhw->arr = min_t(u64, arr, priv->max_arr) - 1; + } + + duty = mul_u64_u64_div_u64(wf->duty_length_ns, rate, + (u64)NSEC_PER_SEC * (wfhw->psc + 1)); + duty = min_t(u64, duty, wfhw->arr + 1); + + if (wf->duty_length_ns && wf->duty_offset_ns && + wf->duty_length_ns + wf->duty_offset_ns >= wf->period_length_ns) { + wfhw->ccer |= TIM_CCER_CCxP(ch + 1); + if (priv->have_complementary_output) + wfhw->ccer |= TIM_CCER_CCxNP(ch + 1); + + ccr = wfhw->arr + 1 - duty; + } else { + ccr = duty; + } + + wfhw->ccr = min_t(u64, ccr, wfhw->arr + 1); + +out: + dev_dbg(&chip->dev, "pwm#%u: %lld/%lld [+%lld] @%lu -> CCER: %08x, PSC: %08x, ARR: %08x, CCR: %08x\n", + pwm->hwpwm, wf->duty_length_ns, wf->period_length_ns, wf->duty_offset_ns, + rate, wfhw->ccer, wfhw->psc, wfhw->arr, wfhw->ccr); + + clk_disable(priv->clk); + + return ret; +} + +/* + * This should be moved to lib/math/div64.c. Currently there are some changes + * pending to mul_u64_u64_div_u64. Uwe will care for that when the dust settles. + */ +static u64 stm32_pwm_mul_u64_u64_div_u64_roundup(u64 a, u64 b, u64 c) +{ + u64 res = mul_u64_u64_div_u64(a, b, c); + /* Those multiplications might overflow but it doesn't matter */ + u64 rem = a * b - c * res; + + if (rem) + res += 1; + + return res; +} + +static int stm32_pwm_round_waveform_fromhw(struct pwm_chip *chip, + struct pwm_device *pwm, + const void *_wfhw, + struct pwm_waveform *wf) +{ + const struct stm32_pwm_waveform *wfhw = _wfhw; + struct stm32_pwm *priv = to_stm32_pwm_dev(chip); + unsigned long rate = clk_get_rate(priv->clk); + unsigned int ch = pwm->hwpwm; + + if (wfhw->ccer & TIM_CCER_CCxE(ch + 1)) { + u64 ccr_ns; + + /* The result doesn't overflow for rate >= 15259 */ + wf->period_length_ns = stm32_pwm_mul_u64_u64_div_u64_roundup(((u64)wfhw->psc + 1) * (wfhw->arr + 1), + NSEC_PER_SEC, rate); + + ccr_ns = stm32_pwm_mul_u64_u64_div_u64_roundup(((u64)wfhw->psc + 1) * wfhw->ccr, + NSEC_PER_SEC, rate); + + if (wfhw->ccer & TIM_CCER_CCxP(ch + 1)) { + wf->duty_length_ns = + stm32_pwm_mul_u64_u64_div_u64_roundup(((u64)wfhw->psc + 1) * (wfhw->arr + 1 - wfhw->ccr), + NSEC_PER_SEC, rate); + + wf->duty_offset_ns = ccr_ns; + } else { + wf->duty_length_ns = ccr_ns; + wf->duty_offset_ns = 0; + } + } else { + *wf = (struct pwm_waveform){ + .period_length_ns = 0, + }; + } + + dev_dbg(&chip->dev, "pwm#%u: CCER: %08x, PSC: %08x, ARR: %08x, CCR: %08x @%lu -> %lld/%lld [+%lld]\n", + pwm->hwpwm, wfhw->ccer, wfhw->psc, wfhw->arr, wfhw->ccr, rate, + wf->duty_length_ns, wf->period_length_ns, wf->duty_offset_ns); + + return 0; +} + +static int stm32_pwm_read_waveform(struct pwm_chip *chip, + struct pwm_device *pwm, + void *_wfhw) +{ + struct stm32_pwm_waveform *wfhw = _wfhw; + struct stm32_pwm *priv = to_stm32_pwm_dev(chip); + unsigned int ch = pwm->hwpwm; + int ret; + + ret = clk_enable(priv->clk); + if (ret) + return ret; + + ret = regmap_read(priv->regmap, TIM_CCER, &wfhw->ccer); + if (ret) + goto out; + + if (wfhw->ccer & TIM_CCER_CCxE(ch + 1)) { + ret = regmap_read(priv->regmap, TIM_PSC, &wfhw->psc); + if (ret) + goto out; + + ret = regmap_read(priv->regmap, TIM_ARR, &wfhw->arr); + if (ret) + goto out; + + if (wfhw->arr == U32_MAX) + wfhw->arr -= 1; + + ret = regmap_read(priv->regmap, TIM_CCRx(ch + 1), &wfhw->ccr); + if (ret) + goto out; + + if (wfhw->ccr > wfhw->arr + 1) + wfhw->ccr = wfhw->arr + 1; + } + +out: + clk_disable(priv->clk); + + return ret; +} + +static int stm32_pwm_write_waveform(struct pwm_chip *chip, + struct pwm_device *pwm, + const void *_wfhw) +{ + const struct stm32_pwm_waveform *wfhw = _wfhw; + struct stm32_pwm *priv = to_stm32_pwm_dev(chip); + unsigned int ch = pwm->hwpwm; + int ret; + + ret = clk_enable(priv->clk); + if (ret) + return ret; + + if (wfhw->ccer & TIM_CCER_CCxE(ch + 1)) { + u32 ccer, mask; + unsigned int shift; + u32 ccmr; + + ret = regmap_read(priv->regmap, TIM_CCER, &ccer); + if (ret) + goto out; + + /* If there are other channels enabled, don't update PSC and ARR */ + if (ccer & ~TIM_CCER_CCxE(ch + 1) & TIM_CCER_CCXE) { + u32 psc, arr; + + ret = regmap_read(priv->regmap, TIM_PSC, &psc); + if (ret) + goto out; + + if (psc != wfhw->psc) { + ret = -EBUSY; + goto out; + } + + ret = regmap_read(priv->regmap, TIM_ARR, &arr); + if (ret) + goto out; + + if (arr != wfhw->arr) { + ret = -EBUSY; + goto out; + } + } else { + ret = regmap_write(priv->regmap, TIM_PSC, wfhw->psc); + if (ret) + goto out; + + ret = regmap_write(priv->regmap, TIM_ARR, wfhw->arr); + if (ret) + goto out; + + ret = regmap_set_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE); + if (ret) + goto out; + + } + + /* set polarity */ + mask = TIM_CCER_CCxP(ch + 1) | TIM_CCER_CCxNP(ch + 1); + ret = regmap_update_bits(priv->regmap, TIM_CCER, mask, wfhw->ccer); + if (ret) + goto out; + + ret = regmap_write(priv->regmap, TIM_CCRx(ch + 1), wfhw->ccr); + if (ret) + goto out; + + /* Configure output mode */ + shift = (ch & 0x1) * CCMR_CHANNEL_SHIFT; + ccmr = (TIM_CCMR_PE | TIM_CCMR_M1) << shift; + mask = CCMR_CHANNEL_MASK << shift; + + if (ch < 2) + ret = regmap_update_bits(priv->regmap, TIM_CCMR1, mask, ccmr); + else + ret = regmap_update_bits(priv->regmap, TIM_CCMR2, mask, ccmr); + if (ret) + goto out; + + ret = regmap_set_bits(priv->regmap, TIM_BDTR, TIM_BDTR_MOE); + if (ret) + goto out; + + if (!(ccer & TIM_CCER_CCxE(ch + 1))) { + mask = TIM_CCER_CCxE(ch + 1) | TIM_CCER_CCxNE(ch + 1); + + ret = clk_enable(priv->clk); + if (ret) + goto out; + + ccer = (ccer & ~mask) | (wfhw->ccer & mask); + regmap_write(priv->regmap, TIM_CCER, ccer); + + /* Make sure that registers are updated */ + regmap_set_bits(priv->regmap, TIM_EGR, TIM_EGR_UG); + + /* Enable controller */ + regmap_set_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN); + } + + } else { + /* disable channel */ + u32 mask, ccer; + + mask = TIM_CCER_CCxE(ch + 1); + if (priv->have_complementary_output) + mask |= TIM_CCER_CCxNE(ch + 1); + + ret = regmap_read(priv->regmap, TIM_CCER, &ccer); + if (ret) + goto out; + + if (ccer & mask) { + ccer = ccer & ~mask; + + ret = regmap_write(priv->regmap, TIM_CCER, ccer); + if (ret) + goto out; + + if (!(ccer & TIM_CCER_CCXE)) { + /* When all channels are disabled, we can disable the controller */ + ret = regmap_clear_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN); + if (ret) + goto out; + } + + clk_disable(priv->clk); + } + } + +out: + clk_disable(priv->clk); + + return ret; +} + +#define TIM_CCER_CC12P (TIM_CCER_CC1P | TIM_CCER_CC2P) +#define TIM_CCER_CC12E (TIM_CCER_CC1E | TIM_CCER_CC2E) +#define TIM_CCER_CC34P (TIM_CCER_CC3P | TIM_CCER_CC4P) +#define TIM_CCER_CC34E (TIM_CCER_CC3E | TIM_CCER_CC4E) + +/* + * Capture using PWM input mode: + * ___ ___ + * TI[1, 2, 3 or 4]: ........._| |________| + * ^0 ^1 ^2 + * . . . + * . . XXXXX + * . . XXXXX | + * . XXXXX . | + * XXXXX . . | + * COUNTER: ______XXXXX . . . |_XXX + * start^ . . . ^stop + * . . . . + * v v . v + * v + * CCR1/CCR3: tx..........t0...........t2 + * CCR2/CCR4: tx..............t1......... + * + * DMA burst transfer: | | + * v v + * DMA buffer: { t0, tx } { t2, t1 } + * DMA done: ^ + * + * 0: IC1/3 snapchot on rising edge: counter value -> CCR1/CCR3 + * + DMA transfer CCR[1/3] & CCR[2/4] values (t0, tx: doesn't care) + * 1: IC2/4 snapchot on falling edge: counter value -> CCR2/CCR4 + * 2: IC1/3 snapchot on rising edge: counter value -> CCR1/CCR3 + * + DMA transfer CCR[1/3] & CCR[2/4] values (t2, t1) + * + * DMA done, compute: + * - Period = t2 - t0 + * - Duty cycle = t1 - t0 + */ +static int stm32_pwm_raw_capture(struct pwm_chip *chip, struct pwm_device *pwm, + unsigned long tmo_ms, u32 *raw_prd, + u32 *raw_dty) +{ + struct stm32_pwm *priv = to_stm32_pwm_dev(chip); + struct device *parent = pwmchip_parent(chip)->parent; + enum stm32_timers_dmas dma_id; + u32 ccen, ccr; + int ret; + + /* Ensure registers have been updated, enable counter and capture */ + regmap_set_bits(priv->regmap, TIM_EGR, TIM_EGR_UG); + regmap_set_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN); + + /* Use cc1 or cc3 DMA resp for PWM input channels 1 & 2 or 3 & 4 */ + dma_id = pwm->hwpwm < 2 ? STM32_TIMERS_DMA_CH1 : STM32_TIMERS_DMA_CH3; + ccen = pwm->hwpwm < 2 ? TIM_CCER_CC12E : TIM_CCER_CC34E; + ccr = pwm->hwpwm < 2 ? TIM_CCR1 : TIM_CCR3; + regmap_set_bits(priv->regmap, TIM_CCER, ccen); + + /* + * Timer DMA burst mode. Request 2 registers, 2 bursts, to get both + * CCR1 & CCR2 (or CCR3 & CCR4) on each capture event. + * We'll get two capture snapchots: { CCR1, CCR2 }, { CCR1, CCR2 } + * or { CCR3, CCR4 }, { CCR3, CCR4 } + */ + ret = stm32_timers_dma_burst_read(parent, priv->capture, dma_id, ccr, 2, + 2, tmo_ms); + if (ret) + goto stop; + + /* Period: t2 - t0 (take care of counter overflow) */ + if (priv->capture[0] <= priv->capture[2]) + *raw_prd = priv->capture[2] - priv->capture[0]; + else + *raw_prd = priv->max_arr - priv->capture[0] + priv->capture[2]; + + /* Duty cycle capture requires at least two capture units */ + if (pwm->chip->npwm < 2) + *raw_dty = 0; + else if (priv->capture[0] <= priv->capture[3]) + *raw_dty = priv->capture[3] - priv->capture[0]; + else + *raw_dty = priv->max_arr - priv->capture[0] + priv->capture[3]; + + if (*raw_dty > *raw_prd) { + /* + * Race beetween PWM input and DMA: it may happen + * falling edge triggers new capture on TI2/4 before DMA + * had a chance to read CCR2/4. It means capture[1] + * contains period + duty_cycle. So, subtract period. + */ + *raw_dty -= *raw_prd; + } + +stop: + regmap_clear_bits(priv->regmap, TIM_CCER, ccen); + regmap_clear_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN); + + return ret; +} + +static int stm32_pwm_capture(struct pwm_chip *chip, struct pwm_device *pwm, + struct pwm_capture *result, unsigned long tmo_ms) +{ + struct stm32_pwm *priv = to_stm32_pwm_dev(chip); + unsigned long long prd, div, dty; + unsigned long rate; + unsigned int psc = 0, icpsc, scale; + u32 raw_prd = 0, raw_dty = 0; + int ret = 0; + + mutex_lock(&priv->lock); + + if (active_channels(priv)) { + ret = -EBUSY; + goto unlock; + } + + ret = clk_enable(priv->clk); + if (ret) { + dev_err(pwmchip_parent(chip), "failed to enable counter clock\n"); + goto unlock; + } + + rate = clk_get_rate(priv->clk); + if (!rate) { + ret = -EINVAL; + goto clk_dis; + } + + /* prescaler: fit timeout window provided by upper layer */ + div = (unsigned long long)rate * (unsigned long long)tmo_ms; + do_div(div, MSEC_PER_SEC); + prd = div; + while ((div > priv->max_arr) && (psc < MAX_TIM_PSC)) { + psc++; + div = prd; + do_div(div, psc + 1); + } + regmap_write(priv->regmap, TIM_ARR, priv->max_arr); + regmap_write(priv->regmap, TIM_PSC, psc); + + /* Reset input selector to its default input and disable slave mode */ + regmap_write(priv->regmap, TIM_TISEL, 0x0); + regmap_write(priv->regmap, TIM_SMCR, 0x0); + + /* Map TI1 or TI2 PWM input to IC1 & IC2 (or TI3/4 to IC3 & IC4) */ + regmap_update_bits(priv->regmap, + pwm->hwpwm < 2 ? TIM_CCMR1 : TIM_CCMR2, + TIM_CCMR_CC1S | TIM_CCMR_CC2S, pwm->hwpwm & 0x1 ? + TIM_CCMR_CC1S_TI2 | TIM_CCMR_CC2S_TI2 : + TIM_CCMR_CC1S_TI1 | TIM_CCMR_CC2S_TI1); + + /* Capture period on IC1/3 rising edge, duty cycle on IC2/4 falling. */ + regmap_update_bits(priv->regmap, TIM_CCER, pwm->hwpwm < 2 ? + TIM_CCER_CC12P : TIM_CCER_CC34P, pwm->hwpwm < 2 ? + TIM_CCER_CC2P : TIM_CCER_CC4P); + + ret = stm32_pwm_raw_capture(chip, pwm, tmo_ms, &raw_prd, &raw_dty); + if (ret) + goto stop; + + /* + * Got a capture. Try to improve accuracy at high rates: + * - decrease counter clock prescaler, scale up to max rate. + * - use input prescaler, capture once every /2 /4 or /8 edges. + */ + if (raw_prd) { + u32 max_arr = priv->max_arr - 0x1000; /* arbitrary margin */ + + scale = max_arr / min(max_arr, raw_prd); + } else { + scale = priv->max_arr; /* below resolution, use max scale */ + } + + if (psc && scale > 1) { + /* 2nd measure with new scale */ + psc /= scale; + regmap_write(priv->regmap, TIM_PSC, psc); + ret = stm32_pwm_raw_capture(chip, pwm, tmo_ms, &raw_prd, + &raw_dty); + if (ret) + goto stop; + } + + /* Compute intermediate period not to exceed timeout at low rates */ + prd = (unsigned long long)raw_prd * (psc + 1) * NSEC_PER_SEC; + do_div(prd, rate); + + for (icpsc = 0; icpsc < MAX_TIM_ICPSC ; icpsc++) { + /* input prescaler: also keep arbitrary margin */ + if (raw_prd >= (priv->max_arr - 0x1000) >> (icpsc + 1)) + break; + if (prd >= (tmo_ms * NSEC_PER_MSEC) >> (icpsc + 2)) + break; + } + + if (!icpsc) + goto done; + + /* Last chance to improve period accuracy, using input prescaler */ + regmap_update_bits(priv->regmap, + pwm->hwpwm < 2 ? TIM_CCMR1 : TIM_CCMR2, + TIM_CCMR_IC1PSC | TIM_CCMR_IC2PSC, + FIELD_PREP(TIM_CCMR_IC1PSC, icpsc) | + FIELD_PREP(TIM_CCMR_IC2PSC, icpsc)); + + ret = stm32_pwm_raw_capture(chip, pwm, tmo_ms, &raw_prd, &raw_dty); + if (ret) + goto stop; + + if (raw_dty >= (raw_prd >> icpsc)) { + /* + * We may fall here using input prescaler, when input + * capture starts on high side (before falling edge). + * Example with icpsc to capture on each 4 events: + * + * start 1st capture 2nd capture + * v v v + * ___ _____ _____ _____ _____ ____ + * TI1..4 |__| |__| |__| |__| |__| + * v v . . . . . v v + * icpsc1/3: . 0 . 1 . 2 . 3 . 0 + * icpsc2/4: 0 1 2 3 0 + * v v v v + * CCR1/3 ......t0..............................t2 + * CCR2/4 ..t1..............................t1'... + * . . . + * Capture0: .<----------------------------->. + * Capture1: .<-------------------------->. . + * . . . + * Period: .<------> . . + * Low side: .<>. + * + * Result: + * - Period = Capture0 / icpsc + * - Duty = Period - Low side = Period - (Capture0 - Capture1) + */ + raw_dty = (raw_prd >> icpsc) - (raw_prd - raw_dty); + } + +done: + prd = (unsigned long long)raw_prd * (psc + 1) * NSEC_PER_SEC; + result->period = DIV_ROUND_UP_ULL(prd, rate << icpsc); + dty = (unsigned long long)raw_dty * (psc + 1) * NSEC_PER_SEC; + result->duty_cycle = DIV_ROUND_UP_ULL(dty, rate); +stop: + regmap_write(priv->regmap, TIM_CCER, 0); + regmap_write(priv->regmap, pwm->hwpwm < 2 ? TIM_CCMR1 : TIM_CCMR2, 0); + regmap_write(priv->regmap, TIM_PSC, 0); +clk_dis: + clk_disable(priv->clk); +unlock: + mutex_unlock(&priv->lock); + + return ret; +} + +static const struct pwm_ops stm32pwm_ops = { + .sizeof_wfhw = sizeof(struct stm32_pwm_waveform), + .round_waveform_tohw = stm32_pwm_round_waveform_tohw, + .round_waveform_fromhw = stm32_pwm_round_waveform_fromhw, + .read_waveform = stm32_pwm_read_waveform, + .write_waveform = stm32_pwm_write_waveform, + + .capture = IS_ENABLED(CONFIG_DMA_ENGINE) ? stm32_pwm_capture : NULL, +}; + +static int stm32_pwm_set_breakinput(struct stm32_pwm *priv, + const struct stm32_breakinput *bi) +{ + u32 shift = TIM_BDTR_BKF_SHIFT(bi->index); + u32 bke = TIM_BDTR_BKE(bi->index); + u32 bkp = TIM_BDTR_BKP(bi->index); + u32 bkf = TIM_BDTR_BKF(bi->index); + u32 mask = bkf | bkp | bke; + u32 bdtr; + + bdtr = (bi->filter & TIM_BDTR_BKF_MASK) << shift | bke; + + if (bi->level) + bdtr |= bkp; + + regmap_update_bits(priv->regmap, TIM_BDTR, mask, bdtr); + + regmap_read(priv->regmap, TIM_BDTR, &bdtr); + + return (bdtr & bke) ? 0 : -EINVAL; +} + +static int stm32_pwm_apply_breakinputs(struct stm32_pwm *priv) +{ + unsigned int i; + int ret; + + for (i = 0; i < priv->num_breakinputs; i++) { + ret = stm32_pwm_set_breakinput(priv, &priv->breakinputs[i]); + if (ret < 0) + return ret; + } + + return 0; +} + +static int stm32_pwm_probe_breakinputs(struct stm32_pwm *priv, + struct device_node *np) +{ + int nb, ret, array_size; + unsigned int i; + + nb = of_property_count_elems_of_size(np, "st,breakinput", + sizeof(struct stm32_breakinput)); + + /* + * Because "st,breakinput" parameter is optional do not make probe + * failed if it doesn't exist. + */ + if (nb <= 0) + return 0; + + if (nb > MAX_BREAKINPUT) + return -EINVAL; + + priv->num_breakinputs = nb; + array_size = nb * sizeof(struct stm32_breakinput) / sizeof(u32); + ret = of_property_read_u32_array(np, "st,breakinput", + (u32 *)priv->breakinputs, array_size); + if (ret) + return ret; + + for (i = 0; i < priv->num_breakinputs; i++) { + if (priv->breakinputs[i].index > 1 || + priv->breakinputs[i].level > 1 || + priv->breakinputs[i].filter > 15) + return -EINVAL; + } + + return stm32_pwm_apply_breakinputs(priv); +} + +static void stm32_pwm_detect_complementary(struct stm32_pwm *priv, struct stm32_timers *ddata) +{ + u32 ccer; + + if (ddata->ipidr) { + u32 val; + + /* Simply read from HWCFGR the number of complementary outputs (MP25). */ + regmap_read(priv->regmap, TIM_HWCFGR1, &val); + priv->have_complementary_output = !!FIELD_GET(TIM_HWCFGR1_NB_OF_DT, val); + return; + } + + /* + * If complementary bit doesn't exist writing 1 will have no + * effect so we can detect it. + */ + regmap_set_bits(priv->regmap, TIM_CCER, TIM_CCER_CC1NE); + regmap_read(priv->regmap, TIM_CCER, &ccer); + regmap_clear_bits(priv->regmap, TIM_CCER, TIM_CCER_CC1NE); + + priv->have_complementary_output = (ccer != 0); +} + +static unsigned int stm32_pwm_detect_channels(struct stm32_timers *ddata, + unsigned int *num_enabled) +{ + struct regmap *regmap = ddata->regmap; + u32 ccer, ccer_backup; + + regmap_read(regmap, TIM_CCER, &ccer_backup); + *num_enabled = hweight32(ccer_backup & TIM_CCER_CCXE); + + if (ddata->ipidr) { + u32 hwcfgr; + unsigned int npwm; + + /* Deduce from HWCFGR the number of outputs (MP25). */ + regmap_read(regmap, TIM_HWCFGR1, &hwcfgr); + + /* + * Timers may have more capture/compare channels than the + * actual number of PWM channel outputs (e.g. TIM_CH[1..4]). + */ + npwm = FIELD_GET(TIM_HWCFGR1_NB_OF_CC, hwcfgr); + + return npwm < STM32_MAX_PWM_OUTPUT ? npwm : STM32_MAX_PWM_OUTPUT; + } + + /* + * If channels enable bits don't exist writing 1 will have no + * effect so we can detect and count them. + */ + regmap_set_bits(regmap, TIM_CCER, TIM_CCER_CCXE); + regmap_read(regmap, TIM_CCER, &ccer); + regmap_write(regmap, TIM_CCER, ccer_backup); + + return hweight32(ccer & TIM_CCER_CCXE); +} + +static int stm32_pwm_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct stm32_timers *ddata = dev_get_drvdata(pdev->dev.parent); + struct pwm_chip *chip; + struct stm32_pwm *priv; + unsigned int npwm, num_enabled; + unsigned int i; + int ret; + + npwm = stm32_pwm_detect_channels(ddata, &num_enabled); + + chip = devm_pwmchip_alloc(dev, npwm, sizeof(*priv)); + if (IS_ERR(chip)) + return PTR_ERR(chip); + priv = to_stm32_pwm_dev(chip); + + mutex_init(&priv->lock); + priv->regmap = ddata->regmap; + priv->clk = ddata->clk; + priv->max_arr = ddata->max_arr; + + if (!priv->regmap || !priv->clk) + return dev_err_probe(dev, -EINVAL, "Failed to get %s\n", + priv->regmap ? "clk" : "regmap"); + + ret = stm32_pwm_probe_breakinputs(priv, np); + if (ret) + return dev_err_probe(dev, ret, + "Failed to configure breakinputs\n"); + + stm32_pwm_detect_complementary(priv, ddata); + + ret = devm_clk_rate_exclusive_get(dev, priv->clk); + if (ret) + return dev_err_probe(dev, ret, "Failed to lock clock\n"); + + /* + * With the clk running with not more than 1 GHz the calculations in + * .apply() won't overflow. + */ + if (clk_get_rate(priv->clk) > 1000000000) + return dev_err_probe(dev, -EINVAL, "Clock freq too high (%lu)\n", + clk_get_rate(priv->clk)); + + chip->ops = &stm32pwm_ops; + + /* Initialize clock refcount to number of enabled PWM channels. */ + for (i = 0; i < num_enabled; i++) { + ret = clk_enable(priv->clk); + if (ret) + return ret; + } + + ret = devm_pwmchip_add(dev, chip); + if (ret < 0) + return dev_err_probe(dev, ret, + "Failed to register pwmchip\n"); + + platform_set_drvdata(pdev, chip); + + return 0; +} + +static int stm32_pwm_suspend(struct device *dev) +{ + struct pwm_chip *chip = dev_get_drvdata(dev); + struct stm32_pwm *priv = to_stm32_pwm_dev(chip); + unsigned int i; + u32 ccer, mask; + + /* Look for active channels */ + ccer = active_channels(priv); + + for (i = 0; i < chip->npwm; i++) { + mask = TIM_CCER_CCxE(i + 1); + if (ccer & mask) { + dev_err(dev, "PWM %u still in use by consumer %s\n", + i, chip->pwms[i].label); + return -EBUSY; + } + } + + return pinctrl_pm_select_sleep_state(dev); +} + +static int stm32_pwm_resume(struct device *dev) +{ + struct pwm_chip *chip = dev_get_drvdata(dev); + struct stm32_pwm *priv = to_stm32_pwm_dev(chip); + int ret; + + ret = pinctrl_pm_select_default_state(dev); + if (ret) + return ret; + + /* restore breakinput registers that may have been lost in low power */ + return stm32_pwm_apply_breakinputs(priv); +} + +static DEFINE_SIMPLE_DEV_PM_OPS(stm32_pwm_pm_ops, stm32_pwm_suspend, stm32_pwm_resume); + +static const struct of_device_id stm32_pwm_of_match[] = { + { .compatible = "st,stm32-pwm", }, + { .compatible = "st,stm32mp25-pwm", }, + { /* end node */ }, +}; +MODULE_DEVICE_TABLE(of, stm32_pwm_of_match); + +static struct platform_driver stm32_pwm_driver = { + .probe = stm32_pwm_probe, + .driver = { + .name = "stm32-pwm", + .of_match_table = stm32_pwm_of_match, + .pm = pm_ptr(&stm32_pwm_pm_ops), + }, +}; +module_platform_driver(stm32_pwm_driver); + +MODULE_ALIAS("platform:stm32-pwm"); +MODULE_DESCRIPTION("STMicroelectronics STM32 PWM driver"); +MODULE_LICENSE("GPL v2"); |