diff options
Diffstat (limited to 'drivers/regulator/Kconfig')
| -rw-r--r-- | drivers/regulator/Kconfig | 232 |
1 files changed, 214 insertions, 18 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 965d4f0c18a6..d2335276cce5 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -56,6 +56,16 @@ config REGULATOR_USERSPACE_CONSUMER If unsure, say no. +config REGULATOR_NETLINK_EVENTS + bool "Enable support for receiving regulator events via netlink" + depends on NET + help + Enabling this option allows the kernel to broadcast regulator events using + the netlink mechanism. User-space applications can subscribe to these events + for real-time updates on various regulator events. + + If unsure, say no. + config REGULATOR_88PG86X tristate "Marvell 88PG86X voltage regulators" depends on I2C @@ -81,6 +91,12 @@ config REGULATOR_88PM8607 help This driver supports 88PM8607 voltage regulator chips. +config REGULATOR_88PM886 + tristate "Marvell 88PM886 voltage regulators" + depends on MFD_88PM886_PMIC + help + This driver implements support for Marvell 88PM886 voltage regulators. + config REGULATOR_ACT8865 tristate "Active-semi act8865 voltage regulator" depends on I2C @@ -106,6 +122,17 @@ config REGULATOR_AD5398 This driver supports AD5398 and AD5821 current regulator chips. If building into module, its name is ad5398.ko. +config REGULATOR_ADP5055 + tristate "Analog Devices ADP5055 Triple Buck Regulator" + depends on I2C + select REGMAP_I2C + help + This driver controls an Analog Devices ADP5055 with triple buck + regulators using an I2C interface. + + Say M here if you want to include support for the regulator as a + module. + config REGULATOR_ANATOP tristate "Freescale i.MX on-chip ANATOP LDO regulators" depends on ARCH_MXC || COMPILE_TEST @@ -258,6 +285,26 @@ config REGULATOR_BD957XMUF This driver can also be built as a module. If so, the module will be called bd9576-regulator. +config REGULATOR_BD96801 + tristate "ROHM BD96801 Power Regulator" + depends on MFD_ROHM_BD96801 + select REGULATOR_ROHM + help + This driver supports voltage regulators on ROHM BD96801 PMIC. + This will enable support for the software controllable buck + and LDO regulators. + + This driver can also be built as a module. If so, the module + will be called bd96801-regulator. + +config REGULATOR_BQ257XX + tristate "TI BQ257XX regulator family" + depends on MFD_BQ257XX + depends on GPIOLIB || COMPILE_TEST + help + Say Y to enable support for the boost regulator function of + the BQ257XX family of charger circuits. + config REGULATOR_CPCAP tristate "Motorola CPCAP regulator" depends on MFD_CPCAP @@ -278,7 +325,7 @@ config REGULATOR_CROS_EC config REGULATOR_DA903X tristate "Dialog Semiconductor DA9030/DA9034 regulators" depends on PMIC_DA903X - depends on !CC_IS_CLANG # https://bugs.llvm.org/show_bug.cgi?id=38789 + depends on !CC_IS_CLANG # https://llvm.org/pr38789 help Say y here to support the BUCKs and LDOs regulators found on Dialog Semiconductor DA9030/DA9034 PMIC. @@ -453,6 +500,16 @@ config REGULATOR_ISL6271A help This driver supports ISL6271A voltage regulator chip. +config REGULATOR_FP9931 + tristate "FitiPower FP9931/JD9930 EPD regulator" + depends on I2C + select REGMAP_I2C + help + This driver supports the FP9931/JD9930 voltage regulator chip + which is used to provide power to Electronic Paper Displays + so it is found in E-Book readers. + If HWWON is enabled, it also provides temperature measurement. + config REGULATOR_LM363X tristate "TI LM363X voltage regulators" depends on MFD_TI_LMU @@ -564,6 +621,16 @@ config REGULATOR_MAX5970 The MAX5970/5978 is a smart switch with no output regulation, but fault protection and voltage and current monitoring capabilities. +config REGULATOR_MAX77503 + tristate "Analog Devices MAX77503 Regulator" + depends on I2C + select REGMAP_I2C + help + This driver controls a Analog Devices MAX77503 14V input, 1.5A + high-efficiency buck converter via I2C bus. + Say M here if you want to include support for the regulator as a + module. + config REGULATOR_MAX77541 tristate "Analog Devices MAX77541/77540 Regulator" depends on MFD_MAX77541 @@ -728,6 +795,15 @@ config REGULATOR_MAX77826 It includes support for control of output voltage. This regulator is found on the Samsung Galaxy S5 (klte) smartphone. +config REGULATOR_MAX77838 + tristate "Maxim 77838 regulator" + depends on I2C + select REGMAP_I2C + help + This driver controls a Maxim 77838 regulator via I2C bus. + The regulator include 4 LDOs and a BUCK regulator. It's + present on the Samsung Galaxy S7 lineup of smartphones. + config REGULATOR_MC13XXX_CORE tristate @@ -815,6 +891,16 @@ config REGULATOR_MT6315 This driver supports the control of different power rails of device through regulator interface. +config REGULATOR_MT6316 + tristate "MT6316 SPMI PMIC regulator driver" + depends on SPMI + select REGMAP_SPMI + help + Say Y here to enable support for 2+2, 3+1 and 4 phase regulators + found in the MediaTek MT6316 BP, CP, DP, HP, VP and TP SPMI PMICs. + This driver supports the control of different power rails of device + through regulator interface. + config REGULATOR_MT6323 tristate "MediaTek MT6323 PMIC" depends on MFD_MT6397 @@ -878,6 +964,16 @@ config REGULATOR_MT6360 2-channel buck with Thermal Shutdown and Overload Protection 6-channel High PSRR and Low Dropout LDO. +config REGULATOR_MT6363 + tristate "MT6363 SPMI PMIC regulator driver" + depends on SPMI + select REGMAP_SPMI + help + Say Y here to enable support for regulators found in the MediaTek + MT6363 SPMI PMIC. + This driver supports the control of different power rails of device + through regulator interface. + config REGULATOR_MT6370 tristate "MT6370 SubPMIC Regulator" depends on MFD_MT6370 @@ -943,6 +1039,13 @@ config REGULATOR_PCA9450 Say y here to support the NXP PCA9450A/PCA9450B/PCA9450C PMIC regulator driver. +config REGULATOR_PF9453 + tristate "NXP PF9453 regulator driver" + depends on I2C + select REGMAP_I2C + help + Say y here to support the NXP PF9453 PMIC regulator driver. + config REGULATOR_PCAP tristate "Motorola PCAP2 regulator driver" depends on EZX_PCAP @@ -950,12 +1053,25 @@ config REGULATOR_PCAP This driver provides support for the voltage regulators of the PCAP2 PMIC. -config REGULATOR_PCF50633 - tristate "NXP PCF50633 regulator driver" - depends on MFD_PCF50633 +config REGULATOR_PF0900 + tristate "NXP PF0900/PF0901/PF09XX regulator driver" + depends on I2C + select REGMAP_I2C + help + Say y here to support the NXP PF0900/PF0901/PF09XX PMIC + regulator driver. + +config REGULATOR_PF530X + tristate "NXP PF5300/PF5301/PF5302 regulator driver" + depends on I2C && OF + select REGMAP_I2C help - Say Y here to support the voltage regulators and converters - on PCF50633 + Say y here to support the regulators found on the NXP + PF5300/PF5301/PF5302 PMIC. + + Say M here if you want to support for the regulators found + on the NXP PF5300/PF5301/PF5302 PMIC. The module will be named + "pf530x-regulator". config REGULATOR_PF8X00 tristate "NXP PF8100/PF8121A/PF8200 regulator driver" @@ -1000,6 +1116,15 @@ config REGULATOR_PV88090 Say y here to support the voltage regulators and convertors on PV88090 +config REGULATOR_PF1550 + tristate "NXP PF1550 regulator" + depends on MFD_PF1550 + help + Say y here to select this option to enable the regulators on + the PF1550 PMICs. + This driver controls the PF1550 regulators via I2C bus. + The regulators include three bucks and three ldos. + config REGULATOR_PWM tristate "PWM voltage regulator" depends on PWM @@ -1007,6 +1132,13 @@ config REGULATOR_PWM This driver supports PWM controlled voltage regulators. PWM duty cycle can increase or decrease the voltage. +config REGULATOR_QCOM_PM8008 + tristate "Qualcomm PM8008 PMIC regulators" + depends on MFD_QCOM_PM8008 + help + Select this option to enable support for the voltage regulators in + Qualcomm PM8008 PMICs. + config REGULATOR_QCOM_REFGEN tristate "Qualcomm REFGEN regulator driver" depends on ARCH_QCOM || COMPILE_TEST @@ -1088,6 +1220,7 @@ config REGULATOR_RAA215300 config REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY tristate "Raspberry Pi 7-inch touchscreen panel ATTINY regulator" + depends on ARM || ARM64 || COMPILE_TEST depends on BACKLIGHT_CLASS_DEVICE depends on I2C depends on OF_GPIO @@ -1097,6 +1230,18 @@ config REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY touchscreen unit. The regulator is used to enable power to the TC358762, display and to control backlight. +config REGULATOR_RASPBERRYPI_TOUCHSCREEN_V2 + tristate "Raspberry Pi 7-inch touchscreen panel V2 regulator" + depends on ARM || ARM64 || COMPILE_TEST + depends on GPIOLIB + depends on I2C && OF + select GPIO_REGMAP + select REGMAP_I2C + help + This driver supports regulator on the V2 Raspberry Pi touchscreen + unit. The regulator is used to enable power to the display and to + control backlight PWM. + config REGULATOR_RC5T583 tristate "RICOH RC5T583 Power regulators" depends on MFD_RC5T583 @@ -1136,7 +1281,7 @@ config REGULATOR_RT4801 The device supports two regulators (DSVP/DSVN). config REGULATOR_RT4803 - tristate "Richtek RT4803 boost regualtor" + tristate "Richtek RT4803 boost regulator" depends on I2C select REGMAP_I2C help @@ -1173,6 +1318,18 @@ config REGULATOR_RT5120 600mV to 1395mV, per step 6.250mV. The others are all fixed voltage by external hardware circuit. +config REGULATOR_RT5133 + tristate "Richtek RT5133 PMIC Regulators" + depends on I2C && GPIOLIB && OF + select REGMAP + select CRC8 + select OF_GPIO + help + This driver adds support for RT5133 PMIC regulators. + RT5133 is an integrated chip. It includes 8 LDOs and 3 GPOs that + can be used to drive output high/low purpose. The dependency of the + GPO block is internally LDO1 Voltage. + config REGULATOR_RT5190A tristate "Richtek RT5190A PMIC" depends on I2C @@ -1277,6 +1434,14 @@ config REGULATOR_RTQ2208 and two ldos. It features wide output voltage range from 0.4V to 2.05V and the capability to configure the corresponding power stages. +config REGULATOR_S2DOS05 + tristate "Samsung S2DOS05 voltage regulator" + depends on MFD_SEC_CORE || COMPILE_TEST + help + This driver provides support for the voltage regulators of the S2DOS05. + The S2DOS05 is a companion power management IC for the smart phones. + The S2DOS05 has 4 LDOs and 1 BUCK outputs. + config REGULATOR_S2MPA01 tristate "Samsung S2MPA01 voltage regulator" depends on MFD_SEC_CORE || COMPILE_TEST @@ -1285,10 +1450,10 @@ config REGULATOR_S2MPA01 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. config REGULATOR_S2MPS11 - tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator" + tristate "Samsung S2MPS11/13/14/15/S2MPU02/05 voltage regulator" depends on MFD_SEC_CORE || COMPILE_TEST help - This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage + This driver supports a Samsung S2MPS11/13/14/15/S2MPU02/05 voltage output regulator via I2C bus. The chip is comprised of high efficient Buck converters including Dual-Phase Buck converter, Buck-Boost converter, various LDOs. @@ -1328,12 +1493,18 @@ config REGULATOR_SLG51000 The SLG51000 is seven compact and customizable low dropout regulators. -config REGULATOR_SM5703 - tristate "Silicon Mitus SM5703 regulators" - depends on MFD_SM5703 +config REGULATOR_SPACEMIT_P1 + tristate "SpacemiT P1 regulators" + depends on ARCH_SPACEMIT || COMPILE_TEST + depends on I2C + select MFD_SPACEMIT_P1 + default ARCH_SPACEMIT help - This driver provides support for voltage regulators of SM5703 - multi-function device. + Enable support for regulators implemented by the SpacemiT P1 + power controller. The P1 implements 6 high-efficiency buck + converters and 12 programmable LDO regulators. To compile this + driver as a module, choose M here. The module will be called + "spacemit-pmic". config REGULATOR_STM32_BOOSTER tristate "STMicroelectronics STM32 BOOSTER" @@ -1395,6 +1566,14 @@ config REGULATOR_STW481X_VMMC This driver supports the internal VMMC regulator in the STw481x PMIC chips. +config REGULATOR_SUN20I + tristate "Allwinner D1 internal LDOs" + depends on ARCH_SUNXI || COMPILE_TEST + select MFD_SYSCON + default ARCH_SUNXI + help + This driver supports the internal LDOs in the Allwinner D1 SoC. + config REGULATOR_SY7636A tristate "Silergy SY7636A voltage regulator" depends on MFD_SY7636A @@ -1533,23 +1712,31 @@ config REGULATOR_TPS65219 tristate "TI TPS65219 Power regulators" depends on MFD_TPS65219 && OF help - This driver supports TPS65219 voltage regulator chips. + This driver supports TPS65219, TPS65215, and TPS65214 voltage + regulator chips. TPS65219 series of PMICs have 3 single phase BUCKs & 4 LDOs - voltage regulators. It supports software based voltage control - for different voltage domains. + voltage regulators. + TPS65215 PMIC has 3 single phase BUCKs & 2 LDOs. + TPS65214 PMIC has 3 synchronous stepdown DC-DC converters & 2 + LDOs. One LDO supports a maximum output current of 300 mA and the + other a maximum of 500 mA + All 3 PMICs support software based voltage control for different + voltage domains. config REGULATOR_TPS6594 tristate "TI TPS6594 Power regulators" depends on MFD_TPS6594 && OF default MFD_TPS6594 help - This driver supports TPS6594 voltage regulator chips. + This driver supports TPS6594 series and TPS65224 voltage regulator chips. TPS6594 series of PMICs have 5 BUCKs and 4 LDOs voltage regulators. BUCKs 1,2,3,4 can be used in single phase or multiphase mode. Part number defines which single or multiphase mode is i used. It supports software based voltage control for different voltage domains. + TPS65224 PMIC has 4 BUCKs and 3 LDOs. BUCK12 can be used in dual phase. + All BUCKs and LDOs volatge can be controlled through software. config REGULATOR_TPS6524X tristate "TI TPS6524X Power regulators" @@ -1604,6 +1791,15 @@ config REGULATOR_UNIPHIER help Support for regulators implemented on Socionext UniPhier SoCs. +config REGULATOR_RZG2L_VBCTRL + tristate "Renesas RZ/G2L USB VBUS regulator driver" + depends on RESET_RZG2L_USBPHY_CTRL || COMPILE_TEST + depends on OF + select REGMAP_MMIO + default RESET_RZG2L_USBPHY_CTRL + help + Support for VBUS regulators implemented on Renesas RZ/G2L SoCs. + config REGULATOR_VCTRL tristate "Voltage controlled regulators" depends on OF |