summaryrefslogtreecommitdiff
path: root/drivers/regulator/pca9450-regulator.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/regulator/pca9450-regulator.c')
-rw-r--r--drivers/regulator/pca9450-regulator.c753
1 files changed, 665 insertions, 88 deletions
diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
index 2ab365d2749f..5fa868264250 100644
--- a/drivers/regulator/pca9450-regulator.c
+++ b/drivers/regulator/pca9450-regulator.c
@@ -9,6 +9,7 @@
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
+#include <linux/reboot.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
@@ -16,12 +17,18 @@
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regulator/pca9450.h>
+#include <dt-bindings/regulator/nxp,pca9450-regulator.h>
+
+static unsigned int pca9450_buck_get_mode(struct regulator_dev *rdev);
+static int pca9450_buck_set_mode(struct regulator_dev *rdev, unsigned int mode);
struct pc9450_dvs_config {
unsigned int run_reg; /* dvs0 */
unsigned int run_mask;
unsigned int standby_reg; /* dvs1 */
unsigned int standby_mask;
+ unsigned int mode_reg; /* ctrl */
+ unsigned int mode_mask;
};
struct pca9450_regulator_desc {
@@ -36,6 +43,7 @@ struct pca9450 {
enum pca9450_chip_type type;
unsigned int rcnt;
int irq;
+ bool sd_vsel_fixed_low;
};
static const struct regmap_range pca9450_status_range = {
@@ -53,7 +61,7 @@ static const struct regmap_config pca9450_regmap_config = {
.val_bits = 8,
.volatile_table = &pca9450_volatile_regs,
.max_register = PCA9450_MAX_REGISTER - 1,
- .cache_type = REGCACHE_RBTREE,
+ .cache_type = REGCACHE_MAPLE,
};
/*
@@ -77,6 +85,8 @@ static const struct regulator_ops pca9450_dvs_buck_regulator_ops = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = regulator_set_ramp_delay_regmap,
+ .set_mode = pca9450_buck_set_mode,
+ .get_mode = pca9450_buck_get_mode,
};
static const struct regulator_ops pca9450_buck_regulator_ops = {
@@ -87,6 +97,8 @@ static const struct regulator_ops pca9450_buck_regulator_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_mode = pca9450_buck_set_mode,
+ .get_mode = pca9450_buck_get_mode,
};
static const struct regulator_ops pca9450_ldo_regulator_ops = {
@@ -98,6 +110,61 @@ static const struct regulator_ops pca9450_ldo_regulator_ops = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
};
+static unsigned int pca9450_ldo5_get_reg_voltage_sel(struct regulator_dev *rdev)
+{
+ struct pca9450 *pca9450 = rdev_get_drvdata(rdev);
+
+ if (pca9450->sd_vsel_fixed_low)
+ return PCA9450_REG_LDO5CTRL_L;
+
+ if (pca9450->sd_vsel_gpio && !gpiod_get_value(pca9450->sd_vsel_gpio))
+ return PCA9450_REG_LDO5CTRL_L;
+
+ return rdev->desc->vsel_reg;
+}
+
+static int pca9450_ldo5_get_voltage_sel_regmap(struct regulator_dev *rdev)
+{
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(rdev->regmap, pca9450_ldo5_get_reg_voltage_sel(rdev), &val);
+ if (ret != 0)
+ return ret;
+
+ val &= rdev->desc->vsel_mask;
+ val >>= ffs(rdev->desc->vsel_mask) - 1;
+
+ return val;
+}
+
+static int pca9450_ldo5_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned int sel)
+{
+ int ret;
+
+ sel <<= ffs(rdev->desc->vsel_mask) - 1;
+
+ ret = regmap_update_bits(rdev->regmap, pca9450_ldo5_get_reg_voltage_sel(rdev),
+ rdev->desc->vsel_mask, sel);
+ if (ret)
+ return ret;
+
+ if (rdev->desc->apply_bit)
+ ret = regmap_update_bits(rdev->regmap, rdev->desc->apply_reg,
+ rdev->desc->apply_bit,
+ rdev->desc->apply_bit);
+ return ret;
+}
+
+static const struct regulator_ops pca9450_ldo5_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .set_voltage_sel = pca9450_ldo5_set_voltage_sel_regmap,
+ .get_voltage_sel = pca9450_ldo5_get_voltage_sel_regmap,
+};
+
/*
* BUCK1/2/3
* 0.60 to 2.1875V (12.5mV step)
@@ -107,6 +174,14 @@ static const struct linear_range pca9450_dvs_buck_volts[] = {
};
/*
+ * BUCK1/3
+ * 0.65 to 2.2375V (12.5mV step)
+ */
+static const struct linear_range pca9451a_dvs_buck_volts[] = {
+ REGULATOR_LINEAR_RANGE(650000, 0x00, 0x7F, 12500),
+};
+
+/*
* BUCK4/5/6
* 0.6V to 3.4V (25mV step)
*/
@@ -174,7 +249,7 @@ static int buck_set_dvs(const struct regulator_desc *desc,
}
if (ret == 0) {
- struct pca9450_regulator_desc *regulator = container_of(desc,
+ const struct pca9450_regulator_desc *regulator = container_of_const(desc,
struct pca9450_regulator_desc, desc);
/* Enable DVS control through PMIC_STBY_REQ for this BUCK */
@@ -188,7 +263,7 @@ static int pca9450_set_dvs_levels(struct device_node *np,
const struct regulator_desc *desc,
struct regulator_config *cfg)
{
- struct pca9450_regulator_desc *data = container_of(desc,
+ const struct pca9450_regulator_desc *data = container_of_const(desc,
struct pca9450_regulator_desc, desc);
const struct pc9450_dvs_config *dvs = &data->dvs;
unsigned int reg, mask;
@@ -219,10 +294,68 @@ static int pca9450_set_dvs_levels(struct device_node *np,
return ret;
}
-static const struct pca9450_regulator_desc pca9450a_regulators[] = {
+static inline unsigned int pca9450_map_mode(unsigned int mode)
+{
+ switch (mode) {
+ case PCA9450_BUCK_MODE_AUTO:
+ return REGULATOR_MODE_NORMAL;
+ case PCA9450_BUCK_MODE_FORCE_PWM:
+ return REGULATOR_MODE_FAST;
+ default:
+ return REGULATOR_MODE_INVALID;
+ }
+}
+
+static int pca9450_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+ const struct pca9450_regulator_desc *desc = container_of_const(rdev->desc,
+ struct pca9450_regulator_desc, desc);
+ const struct pc9450_dvs_config *dvs = &desc->dvs;
+ int val;
+
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ val = dvs->mode_mask;
+ break;
+ case REGULATOR_MODE_NORMAL:
+ val = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ dev_dbg(&rdev->dev, "pca9450 buck set_mode %#x, %#x, %#x\n",
+ dvs->mode_reg, dvs->mode_mask, val);
+
+ return regmap_update_bits(rdev->regmap, dvs->mode_reg,
+ dvs->mode_mask, val);
+}
+
+static unsigned int pca9450_buck_get_mode(struct regulator_dev *rdev)
+{
+ const struct pca9450_regulator_desc *desc = container_of_const(rdev->desc,
+ struct pca9450_regulator_desc, desc);
+ const struct pc9450_dvs_config *dvs = &desc->dvs;
+ int ret = 0, regval;
+
+ ret = regmap_read(rdev->regmap, dvs->mode_reg, &regval);
+ if (ret != 0) {
+ dev_err(&rdev->dev,
+ "Failed to get pca9450 buck mode: %d\n", ret);
+ return ret;
+ }
+
+ if ((regval & dvs->mode_mask) == dvs->mode_mask)
+ return REGULATOR_MODE_FAST;
+
+ return REGULATOR_MODE_NORMAL;
+}
+
+static struct pca9450_regulator_desc pca9450a_regulators[] = {
{
.desc = {
.name = "buck1",
+ .supply_name = "inb13",
.of_match = of_match_ptr("BUCK1"),
.regulators_node = of_match_ptr("regulators"),
.id = PCA9450_BUCK1,
@@ -239,19 +372,24 @@ static const struct pca9450_regulator_desc pca9450a_regulators[] = {
.ramp_mask = BUCK1_RAMP_MASK,
.ramp_delay_table = pca9450_dvs_buck_ramp_table,
.n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
+ .enable_val = BUCK_ENMODE_ONREQ,
.owner = THIS_MODULE,
.of_parse_cb = pca9450_set_dvs_levels,
+ .of_map_mode = pca9450_map_mode,
},
.dvs = {
.run_reg = PCA9450_REG_BUCK1OUT_DVS0,
.run_mask = BUCK1OUT_DVS0_MASK,
.standby_reg = PCA9450_REG_BUCK1OUT_DVS1,
.standby_mask = BUCK1OUT_DVS1_MASK,
+ .mode_reg = PCA9450_REG_BUCK1CTRL,
+ .mode_mask = BUCK1_FPWM,
},
},
{
.desc = {
.name = "buck2",
+ .supply_name = "inb26",
.of_match = of_match_ptr("BUCK2"),
.regulators_node = of_match_ptr("regulators"),
.id = PCA9450_BUCK2,
@@ -264,23 +402,28 @@ static const struct pca9450_regulator_desc pca9450a_regulators[] = {
.vsel_mask = BUCK2OUT_DVS0_MASK,
.enable_reg = PCA9450_REG_BUCK2CTRL,
.enable_mask = BUCK2_ENMODE_MASK,
+ .enable_val = BUCK_ENMODE_ONREQ_STBYREQ,
.ramp_reg = PCA9450_REG_BUCK2CTRL,
.ramp_mask = BUCK2_RAMP_MASK,
.ramp_delay_table = pca9450_dvs_buck_ramp_table,
.n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
.owner = THIS_MODULE,
.of_parse_cb = pca9450_set_dvs_levels,
+ .of_map_mode = pca9450_map_mode,
},
.dvs = {
.run_reg = PCA9450_REG_BUCK2OUT_DVS0,
.run_mask = BUCK2OUT_DVS0_MASK,
.standby_reg = PCA9450_REG_BUCK2OUT_DVS1,
.standby_mask = BUCK2OUT_DVS1_MASK,
+ .mode_reg = PCA9450_REG_BUCK2CTRL,
+ .mode_mask = BUCK2_FPWM,
},
},
{
.desc = {
.name = "buck3",
+ .supply_name = "inb13",
.of_match = of_match_ptr("BUCK3"),
.regulators_node = of_match_ptr("regulators"),
.id = PCA9450_BUCK3,
@@ -293,23 +436,28 @@ static const struct pca9450_regulator_desc pca9450a_regulators[] = {
.vsel_mask = BUCK3OUT_DVS0_MASK,
.enable_reg = PCA9450_REG_BUCK3CTRL,
.enable_mask = BUCK3_ENMODE_MASK,
+ .enable_val = BUCK_ENMODE_ONREQ,
.ramp_reg = PCA9450_REG_BUCK3CTRL,
.ramp_mask = BUCK3_RAMP_MASK,
.ramp_delay_table = pca9450_dvs_buck_ramp_table,
.n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
.owner = THIS_MODULE,
.of_parse_cb = pca9450_set_dvs_levels,
+ .of_map_mode = pca9450_map_mode,
},
.dvs = {
.run_reg = PCA9450_REG_BUCK3OUT_DVS0,
.run_mask = BUCK3OUT_DVS0_MASK,
.standby_reg = PCA9450_REG_BUCK3OUT_DVS1,
.standby_mask = BUCK3OUT_DVS1_MASK,
+ .mode_reg = PCA9450_REG_BUCK3CTRL,
+ .mode_mask = BUCK3_FPWM,
},
},
{
.desc = {
.name = "buck4",
+ .supply_name = "inb45",
.of_match = of_match_ptr("BUCK4"),
.regulators_node = of_match_ptr("regulators"),
.id = PCA9450_BUCK4,
@@ -322,12 +470,19 @@ static const struct pca9450_regulator_desc pca9450a_regulators[] = {
.vsel_mask = BUCK4OUT_MASK,
.enable_reg = PCA9450_REG_BUCK4CTRL,
.enable_mask = BUCK4_ENMODE_MASK,
+ .enable_val = BUCK_ENMODE_ONREQ,
.owner = THIS_MODULE,
+ .of_map_mode = pca9450_map_mode,
+ },
+ .dvs = {
+ .mode_reg = PCA9450_REG_BUCK4CTRL,
+ .mode_mask = BUCK4_FPWM,
},
},
{
.desc = {
.name = "buck5",
+ .supply_name = "inb45",
.of_match = of_match_ptr("BUCK5"),
.regulators_node = of_match_ptr("regulators"),
.id = PCA9450_BUCK5,
@@ -340,12 +495,19 @@ static const struct pca9450_regulator_desc pca9450a_regulators[] = {
.vsel_mask = BUCK5OUT_MASK,
.enable_reg = PCA9450_REG_BUCK5CTRL,
.enable_mask = BUCK5_ENMODE_MASK,
+ .enable_val = BUCK_ENMODE_ONREQ,
.owner = THIS_MODULE,
+ .of_map_mode = pca9450_map_mode,
+ },
+ .dvs = {
+ .mode_reg = PCA9450_REG_BUCK5CTRL,
+ .mode_mask = BUCK5_FPWM,
},
},
{
.desc = {
.name = "buck6",
+ .supply_name = "inb26",
.of_match = of_match_ptr("BUCK6"),
.regulators_node = of_match_ptr("regulators"),
.id = PCA9450_BUCK6,
@@ -358,12 +520,19 @@ static const struct pca9450_regulator_desc pca9450a_regulators[] = {
.vsel_mask = BUCK6OUT_MASK,
.enable_reg = PCA9450_REG_BUCK6CTRL,
.enable_mask = BUCK6_ENMODE_MASK,
+ .enable_val = BUCK_ENMODE_ONREQ,
.owner = THIS_MODULE,
+ .of_map_mode = pca9450_map_mode,
+ },
+ .dvs = {
+ .mode_reg = PCA9450_REG_BUCK6CTRL,
+ .mode_mask = BUCK6_FPWM,
},
},
{
.desc = {
.name = "ldo1",
+ .supply_name = "inl1",
.of_match = of_match_ptr("LDO1"),
.regulators_node = of_match_ptr("regulators"),
.id = PCA9450_LDO1,
@@ -382,6 +551,7 @@ static const struct pca9450_regulator_desc pca9450a_regulators[] = {
{
.desc = {
.name = "ldo2",
+ .supply_name = "inl1",
.of_match = of_match_ptr("LDO2"),
.regulators_node = of_match_ptr("regulators"),
.id = PCA9450_LDO2,
@@ -400,6 +570,7 @@ static const struct pca9450_regulator_desc pca9450a_regulators[] = {
{
.desc = {
.name = "ldo3",
+ .supply_name = "inl1",
.of_match = of_match_ptr("LDO3"),
.regulators_node = of_match_ptr("regulators"),
.id = PCA9450_LDO3,
@@ -418,6 +589,7 @@ static const struct pca9450_regulator_desc pca9450a_regulators[] = {
{
.desc = {
.name = "ldo4",
+ .supply_name = "inl1",
.of_match = of_match_ptr("LDO4"),
.regulators_node = of_match_ptr("regulators"),
.id = PCA9450_LDO4,
@@ -436,17 +608,18 @@ static const struct pca9450_regulator_desc pca9450a_regulators[] = {
{
.desc = {
.name = "ldo5",
+ .supply_name = "inl1",
.of_match = of_match_ptr("LDO5"),
.regulators_node = of_match_ptr("regulators"),
.id = PCA9450_LDO5,
- .ops = &pca9450_ldo_regulator_ops,
+ .ops = &pca9450_ldo5_regulator_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = PCA9450_LDO5_VOLTAGE_NUM,
.linear_ranges = pca9450_ldo5_volts,
.n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts),
.vsel_reg = PCA9450_REG_LDO5CTRL_H,
.vsel_mask = LDO5HOUT_MASK,
- .enable_reg = PCA9450_REG_LDO5CTRL_H,
+ .enable_reg = PCA9450_REG_LDO5CTRL_L,
.enable_mask = LDO5H_EN_MASK,
.owner = THIS_MODULE,
},
@@ -457,10 +630,11 @@ static const struct pca9450_regulator_desc pca9450a_regulators[] = {
* Buck3 removed on PCA9450B and connected with Buck1 internal for dual phase
* on PCA9450C as no Buck3.
*/
-static const struct pca9450_regulator_desc pca9450bc_regulators[] = {
+static struct pca9450_regulator_desc pca9450bc_regulators[] = {
{
.desc = {
.name = "buck1",
+ .supply_name = "inb13",
.of_match = of_match_ptr("BUCK1"),
.regulators_node = of_match_ptr("regulators"),
.id = PCA9450_BUCK1,
@@ -473,23 +647,28 @@ static const struct pca9450_regulator_desc pca9450bc_regulators[] = {
.vsel_mask = BUCK1OUT_DVS0_MASK,
.enable_reg = PCA9450_REG_BUCK1CTRL,
.enable_mask = BUCK1_ENMODE_MASK,
+ .enable_val = BUCK_ENMODE_ONREQ,
.ramp_reg = PCA9450_REG_BUCK1CTRL,
.ramp_mask = BUCK1_RAMP_MASK,
.ramp_delay_table = pca9450_dvs_buck_ramp_table,
.n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
.owner = THIS_MODULE,
.of_parse_cb = pca9450_set_dvs_levels,
+ .of_map_mode = pca9450_map_mode,
},
.dvs = {
.run_reg = PCA9450_REG_BUCK1OUT_DVS0,
.run_mask = BUCK1OUT_DVS0_MASK,
.standby_reg = PCA9450_REG_BUCK1OUT_DVS1,
.standby_mask = BUCK1OUT_DVS1_MASK,
+ .mode_reg = PCA9450_REG_BUCK1CTRL,
+ .mode_mask = BUCK1_FPWM,
},
},
{
.desc = {
.name = "buck2",
+ .supply_name = "inb26",
.of_match = of_match_ptr("BUCK2"),
.regulators_node = of_match_ptr("regulators"),
.id = PCA9450_BUCK2,
@@ -502,23 +681,28 @@ static const struct pca9450_regulator_desc pca9450bc_regulators[] = {
.vsel_mask = BUCK2OUT_DVS0_MASK,
.enable_reg = PCA9450_REG_BUCK2CTRL,
.enable_mask = BUCK2_ENMODE_MASK,
+ .enable_val = BUCK_ENMODE_ONREQ_STBYREQ,
.ramp_reg = PCA9450_REG_BUCK2CTRL,
.ramp_mask = BUCK2_RAMP_MASK,
.ramp_delay_table = pca9450_dvs_buck_ramp_table,
.n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
.owner = THIS_MODULE,
.of_parse_cb = pca9450_set_dvs_levels,
+ .of_map_mode = pca9450_map_mode,
},
.dvs = {
.run_reg = PCA9450_REG_BUCK2OUT_DVS0,
.run_mask = BUCK2OUT_DVS0_MASK,
.standby_reg = PCA9450_REG_BUCK2OUT_DVS1,
.standby_mask = BUCK2OUT_DVS1_MASK,
+ .mode_reg = PCA9450_REG_BUCK2CTRL,
+ .mode_mask = BUCK2_FPWM,
},
},
{
.desc = {
.name = "buck4",
+ .supply_name = "inb45",
.of_match = of_match_ptr("BUCK4"),
.regulators_node = of_match_ptr("regulators"),
.id = PCA9450_BUCK4,
@@ -531,12 +715,19 @@ static const struct pca9450_regulator_desc pca9450bc_regulators[] = {
.vsel_mask = BUCK4OUT_MASK,
.enable_reg = PCA9450_REG_BUCK4CTRL,
.enable_mask = BUCK4_ENMODE_MASK,
+ .enable_val = BUCK_ENMODE_ONREQ,
.owner = THIS_MODULE,
+ .of_map_mode = pca9450_map_mode,
+ },
+ .dvs = {
+ .mode_reg = PCA9450_REG_BUCK4CTRL,
+ .mode_mask = BUCK4_FPWM,
},
},
{
.desc = {
.name = "buck5",
+ .supply_name = "inb45",
.of_match = of_match_ptr("BUCK5"),
.regulators_node = of_match_ptr("regulators"),
.id = PCA9450_BUCK5,
@@ -549,12 +740,19 @@ static const struct pca9450_regulator_desc pca9450bc_regulators[] = {
.vsel_mask = BUCK5OUT_MASK,
.enable_reg = PCA9450_REG_BUCK5CTRL,
.enable_mask = BUCK5_ENMODE_MASK,
+ .enable_val = BUCK_ENMODE_ONREQ,
.owner = THIS_MODULE,
+ .of_map_mode = pca9450_map_mode,
+ },
+ .dvs = {
+ .mode_reg = PCA9450_REG_BUCK5CTRL,
+ .mode_mask = BUCK5_FPWM,
},
},
{
.desc = {
.name = "buck6",
+ .supply_name = "inb26",
.of_match = of_match_ptr("BUCK6"),
.regulators_node = of_match_ptr("regulators"),
.id = PCA9450_BUCK6,
@@ -567,12 +765,19 @@ static const struct pca9450_regulator_desc pca9450bc_regulators[] = {
.vsel_mask = BUCK6OUT_MASK,
.enable_reg = PCA9450_REG_BUCK6CTRL,
.enable_mask = BUCK6_ENMODE_MASK,
+ .enable_val = BUCK_ENMODE_ONREQ,
.owner = THIS_MODULE,
+ .of_map_mode = pca9450_map_mode,
+ },
+ .dvs = {
+ .mode_reg = PCA9450_REG_BUCK6CTRL,
+ .mode_mask = BUCK6_FPWM,
},
},
{
.desc = {
.name = "ldo1",
+ .supply_name = "inl1",
.of_match = of_match_ptr("LDO1"),
.regulators_node = of_match_ptr("regulators"),
.id = PCA9450_LDO1,
@@ -591,6 +796,7 @@ static const struct pca9450_regulator_desc pca9450bc_regulators[] = {
{
.desc = {
.name = "ldo2",
+ .supply_name = "inl1",
.of_match = of_match_ptr("LDO2"),
.regulators_node = of_match_ptr("regulators"),
.id = PCA9450_LDO2,
@@ -609,6 +815,7 @@ static const struct pca9450_regulator_desc pca9450bc_regulators[] = {
{
.desc = {
.name = "ldo3",
+ .supply_name = "inl1",
.of_match = of_match_ptr("LDO3"),
.regulators_node = of_match_ptr("regulators"),
.id = PCA9450_LDO3,
@@ -627,6 +834,7 @@ static const struct pca9450_regulator_desc pca9450bc_regulators[] = {
{
.desc = {
.name = "ldo4",
+ .supply_name = "inl1",
.of_match = of_match_ptr("LDO4"),
.regulators_node = of_match_ptr("regulators"),
.id = PCA9450_LDO4,
@@ -645,17 +853,238 @@ static const struct pca9450_regulator_desc pca9450bc_regulators[] = {
{
.desc = {
.name = "ldo5",
+ .supply_name = "inl1",
.of_match = of_match_ptr("LDO5"),
.regulators_node = of_match_ptr("regulators"),
.id = PCA9450_LDO5,
+ .ops = &pca9450_ldo5_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = PCA9450_LDO5_VOLTAGE_NUM,
+ .linear_ranges = pca9450_ldo5_volts,
+ .n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts),
+ .vsel_reg = PCA9450_REG_LDO5CTRL_H,
+ .vsel_mask = LDO5HOUT_MASK,
+ .enable_reg = PCA9450_REG_LDO5CTRL_L,
+ .enable_mask = LDO5H_EN_MASK,
+ .owner = THIS_MODULE,
+ },
+ },
+};
+
+static struct pca9450_regulator_desc pca9451a_regulators[] = {
+ {
+ .desc = {
+ .name = "buck1",
+ .supply_name = "inb13",
+ .of_match = of_match_ptr("BUCK1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = PCA9450_BUCK1,
+ .ops = &pca9450_dvs_buck_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = PCA9450_BUCK1_VOLTAGE_NUM,
+ .linear_ranges = pca9451a_dvs_buck_volts,
+ .n_linear_ranges = ARRAY_SIZE(pca9451a_dvs_buck_volts),
+ .vsel_reg = PCA9450_REG_BUCK1OUT_DVS0,
+ .vsel_mask = BUCK1OUT_DVS0_MASK,
+ .enable_reg = PCA9450_REG_BUCK1CTRL,
+ .enable_mask = BUCK1_ENMODE_MASK,
+ .enable_val = BUCK_ENMODE_ONREQ,
+ .ramp_mask = BUCK1_RAMP_MASK,
+ .ramp_delay_table = pca9450_dvs_buck_ramp_table,
+ .n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
+ .owner = THIS_MODULE,
+ .of_parse_cb = pca9450_set_dvs_levels,
+ .of_map_mode = pca9450_map_mode,
+ },
+ .dvs = {
+ .run_reg = PCA9450_REG_BUCK1OUT_DVS0,
+ .run_mask = BUCK1OUT_DVS0_MASK,
+ .standby_reg = PCA9450_REG_BUCK1OUT_DVS1,
+ .standby_mask = BUCK1OUT_DVS1_MASK,
+ .mode_reg = PCA9450_REG_BUCK1CTRL,
+ .mode_mask = BUCK1_FPWM,
+ },
+ },
+ {
+ .desc = {
+ .name = "buck2",
+ .supply_name = "inb26",
+ .of_match = of_match_ptr("BUCK2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = PCA9450_BUCK2,
+ .ops = &pca9450_dvs_buck_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = PCA9450_BUCK2_VOLTAGE_NUM,
+ .linear_ranges = pca9450_dvs_buck_volts,
+ .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts),
+ .vsel_reg = PCA9450_REG_BUCK2OUT_DVS0,
+ .vsel_mask = BUCK2OUT_DVS0_MASK,
+ .enable_reg = PCA9450_REG_BUCK2CTRL,
+ .enable_mask = BUCK2_ENMODE_MASK,
+ .enable_val = BUCK_ENMODE_ONREQ_STBYREQ,
+ .ramp_mask = BUCK2_RAMP_MASK,
+ .ramp_delay_table = pca9450_dvs_buck_ramp_table,
+ .n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
+ .owner = THIS_MODULE,
+ .of_parse_cb = pca9450_set_dvs_levels,
+ .of_map_mode = pca9450_map_mode,
+ },
+ .dvs = {
+ .run_reg = PCA9450_REG_BUCK2OUT_DVS0,
+ .run_mask = BUCK2OUT_DVS0_MASK,
+ .standby_reg = PCA9450_REG_BUCK2OUT_DVS1,
+ .standby_mask = BUCK2OUT_DVS1_MASK,
+ .mode_reg = PCA9450_REG_BUCK2CTRL,
+ .mode_mask = BUCK2_FPWM,
+ },
+ },
+ {
+ .desc = {
+ .name = "buck4",
+ .supply_name = "inb45",
+ .of_match = of_match_ptr("BUCK4"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = PCA9450_BUCK4,
+ .ops = &pca9450_buck_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = PCA9450_BUCK4_VOLTAGE_NUM,
+ .linear_ranges = pca9450_buck_volts,
+ .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
+ .vsel_reg = PCA9450_REG_BUCK4OUT,
+ .vsel_mask = BUCK4OUT_MASK,
+ .enable_reg = PCA9450_REG_BUCK4CTRL,
+ .enable_mask = BUCK4_ENMODE_MASK,
+ .enable_val = BUCK_ENMODE_ONREQ,
+ .owner = THIS_MODULE,
+ .of_map_mode = pca9450_map_mode,
+ },
+ .dvs = {
+ .mode_reg = PCA9450_REG_BUCK4CTRL,
+ .mode_mask = BUCK4_FPWM,
+ },
+ },
+ {
+ .desc = {
+ .name = "buck5",
+ .supply_name = "inb45",
+ .of_match = of_match_ptr("BUCK5"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = PCA9450_BUCK5,
+ .ops = &pca9450_buck_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = PCA9450_BUCK5_VOLTAGE_NUM,
+ .linear_ranges = pca9450_buck_volts,
+ .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
+ .vsel_reg = PCA9450_REG_BUCK5OUT,
+ .vsel_mask = BUCK5OUT_MASK,
+ .enable_reg = PCA9450_REG_BUCK5CTRL,
+ .enable_mask = BUCK5_ENMODE_MASK,
+ .enable_val = BUCK_ENMODE_ONREQ,
+ .owner = THIS_MODULE,
+ .of_map_mode = pca9450_map_mode,
+ },
+ .dvs = {
+ .mode_reg = PCA9450_REG_BUCK5CTRL,
+ .mode_mask = BUCK5_FPWM,
+ },
+ },
+ {
+ .desc = {
+ .name = "buck6",
+ .supply_name = "inb26",
+ .of_match = of_match_ptr("BUCK6"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = PCA9450_BUCK6,
+ .ops = &pca9450_buck_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = PCA9450_BUCK6_VOLTAGE_NUM,
+ .linear_ranges = pca9450_buck_volts,
+ .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
+ .vsel_reg = PCA9450_REG_BUCK6OUT,
+ .vsel_mask = BUCK6OUT_MASK,
+ .enable_reg = PCA9450_REG_BUCK6CTRL,
+ .enable_mask = BUCK6_ENMODE_MASK,
+ .enable_val = BUCK_ENMODE_ONREQ,
+ .owner = THIS_MODULE,
+ .of_map_mode = pca9450_map_mode,
+ },
+ .dvs = {
+ .mode_reg = PCA9450_REG_BUCK6CTRL,
+ .mode_mask = BUCK6_FPWM,
+ },
+ },
+ {
+ .desc = {
+ .name = "ldo1",
+ .supply_name = "inl1",
+ .of_match = of_match_ptr("LDO1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = PCA9450_LDO1,
.ops = &pca9450_ldo_regulator_ops,
.type = REGULATOR_VOLTAGE,
+ .n_voltages = PCA9450_LDO1_VOLTAGE_NUM,
+ .linear_ranges = pca9450_ldo1_volts,
+ .n_linear_ranges = ARRAY_SIZE(pca9450_ldo1_volts),
+ .vsel_reg = PCA9450_REG_LDO1CTRL,
+ .vsel_mask = LDO1OUT_MASK,
+ .enable_reg = PCA9450_REG_LDO1CTRL,
+ .enable_mask = LDO1_EN_MASK,
+ .owner = THIS_MODULE,
+ },
+ },
+ {
+ .desc = {
+ .name = "ldo3",
+ .supply_name = "inl1",
+ .of_match = of_match_ptr("LDO3"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = PCA9450_LDO3,
+ .ops = &pca9450_ldo_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = PCA9450_LDO3_VOLTAGE_NUM,
+ .linear_ranges = pca9450_ldo34_volts,
+ .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts),
+ .vsel_reg = PCA9450_REG_LDO3CTRL,
+ .vsel_mask = LDO3OUT_MASK,
+ .enable_reg = PCA9450_REG_LDO3CTRL,
+ .enable_mask = LDO3_EN_MASK,
+ .owner = THIS_MODULE,
+ },
+ },
+ {
+ .desc = {
+ .name = "ldo4",
+ .supply_name = "inl1",
+ .of_match = of_match_ptr("LDO4"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = PCA9450_LDO4,
+ .ops = &pca9450_ldo_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = PCA9450_LDO4_VOLTAGE_NUM,
+ .linear_ranges = pca9450_ldo34_volts,
+ .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts),
+ .vsel_reg = PCA9450_REG_LDO4CTRL,
+ .vsel_mask = LDO4OUT_MASK,
+ .enable_reg = PCA9450_REG_LDO4CTRL,
+ .enable_mask = LDO4_EN_MASK,
+ .owner = THIS_MODULE,
+ },
+ },
+ {
+ .desc = {
+ .name = "ldo5",
+ .supply_name = "inl1",
+ .of_match = of_match_ptr("LDO5"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = PCA9450_LDO5,
+ .ops = &pca9450_ldo5_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
.n_voltages = PCA9450_LDO5_VOLTAGE_NUM,
.linear_ranges = pca9450_ldo5_volts,
.n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts),
.vsel_reg = PCA9450_REG_LDO5CTRL_H,
.vsel_mask = LDO5HOUT_MASK,
- .enable_reg = PCA9450_REG_LDO5CTRL_H,
+ .enable_reg = PCA9450_REG_LDO5CTRL_L,
.enable_mask = LDO5H_EN_MASK,
.owner = THIS_MODULE,
},
@@ -700,22 +1129,172 @@ static irqreturn_t pca9450_irq_handler(int irq, void *data)
return IRQ_HANDLED;
}
+static int pca9450_i2c_restart_handler(struct sys_off_data *data)
+{
+ struct pca9450 *pca9450 = data->cb_data;
+ struct i2c_client *i2c = container_of(pca9450->dev, struct i2c_client, dev);
+
+ dev_dbg(&i2c->dev, "Restarting device..\n");
+ if (i2c_smbus_write_byte_data(i2c, PCA9450_REG_SWRST, SW_RST_COMMAND) == 0) {
+ /* tRESTART is 250ms, so 300 should be enough to make sure it happened */
+ mdelay(300);
+ /* When we get here, the PMIC didn't power cycle for some reason. so warn.*/
+ dev_warn(&i2c->dev, "Device didn't respond to restart command\n");
+ } else {
+ dev_err(&i2c->dev, "Restart command failed\n");
+ }
+
+ return 0;
+}
+
+static int pca9450_of_init(struct pca9450 *pca9450)
+{
+ struct i2c_client *i2c = container_of(pca9450->dev, struct i2c_client, dev);
+ int ret;
+ unsigned int val;
+ unsigned int reset_ctrl;
+ unsigned int rstb_deb_ctrl;
+ unsigned int t_on_deb, t_off_deb;
+ unsigned int t_on_step, t_off_step;
+ unsigned int t_restart;
+
+ if (of_property_read_bool(i2c->dev.of_node, "nxp,wdog_b-warm-reset"))
+ reset_ctrl = WDOG_B_CFG_WARM;
+ else
+ reset_ctrl = WDOG_B_CFG_COLD_LDO12;
+
+ /* Set reset behavior on assertion of WDOG_B signal */
+ ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_RESET_CTRL,
+ WDOG_B_CFG_MASK, reset_ctrl);
+ if (ret)
+ return dev_err_probe(&i2c->dev, ret, "Failed to set WDOG_B reset behavior\n");
+
+ ret = of_property_read_u32(i2c->dev.of_node, "npx,pmic-rst-b-debounce-ms", &val);
+ if (ret == -EINVAL)
+ rstb_deb_ctrl = T_PMIC_RST_DEB_50MS;
+ else if (ret)
+ return ret;
+ else {
+ switch (val) {
+ case 10: rstb_deb_ctrl = T_PMIC_RST_DEB_10MS; break;
+ case 50: rstb_deb_ctrl = T_PMIC_RST_DEB_50MS; break;
+ case 100: rstb_deb_ctrl = T_PMIC_RST_DEB_100MS; break;
+ case 500: rstb_deb_ctrl = T_PMIC_RST_DEB_500MS; break;
+ case 1000: rstb_deb_ctrl = T_PMIC_RST_DEB_1S; break;
+ case 2000: rstb_deb_ctrl = T_PMIC_RST_DEB_2S; break;
+ case 4000: rstb_deb_ctrl = T_PMIC_RST_DEB_4S; break;
+ case 8000: rstb_deb_ctrl = T_PMIC_RST_DEB_8S; break;
+ default: return -EINVAL;
+ }
+ }
+ ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_RESET_CTRL,
+ T_PMIC_RST_DEB_MASK, rstb_deb_ctrl);
+ if (ret)
+ return dev_err_probe(&i2c->dev, ret, "Failed to set PMIC_RST_B debounce time\n");
+
+ ret = of_property_read_u32(i2c->dev.of_node, "nxp,pmic-on-req-on-debounce-us", &val);
+ if (ret == -EINVAL)
+ t_on_deb = T_ON_DEB_20MS;
+ else if (ret)
+ return ret;
+ else {
+ switch (val) {
+ case 120: t_on_deb = T_ON_DEB_120US; break;
+ case 20000: t_on_deb = T_ON_DEB_20MS; break;
+ case 100000: t_on_deb = T_ON_DEB_100MS; break;
+ case 750000: t_on_deb = T_ON_DEB_750MS; break;
+ default: return -EINVAL;
+ }
+ }
+
+ ret = of_property_read_u32(i2c->dev.of_node, "nxp,pmic-on-req-off-debounce-us", &val);
+ if (ret == -EINVAL)
+ t_off_deb = T_OFF_DEB_120US;
+ else if (ret)
+ return ret;
+ else {
+ switch (val) {
+ case 120: t_off_deb = T_OFF_DEB_120US; break;
+ case 2000: t_off_deb = T_OFF_DEB_2MS; break;
+ default: return -EINVAL;
+ }
+ }
+
+ ret = of_property_read_u32(i2c->dev.of_node, "nxp,power-on-step-ms", &val);
+ if (ret == -EINVAL)
+ t_on_step = T_ON_STEP_2MS;
+ else if (ret)
+ return ret;
+ else {
+ switch (val) {
+ case 1: t_on_step = T_ON_STEP_1MS; break;
+ case 2: t_on_step = T_ON_STEP_2MS; break;
+ case 4: t_on_step = T_ON_STEP_4MS; break;
+ case 8: t_on_step = T_ON_STEP_8MS; break;
+ default: return -EINVAL;
+ }
+ }
+
+ ret = of_property_read_u32(i2c->dev.of_node, "nxp,power-down-step-ms", &val);
+ if (ret == -EINVAL)
+ t_off_step = T_OFF_STEP_8MS;
+ else if (ret)
+ return ret;
+ else {
+ switch (val) {
+ case 2: t_off_step = T_OFF_STEP_2MS; break;
+ case 4: t_off_step = T_OFF_STEP_4MS; break;
+ case 8: t_off_step = T_OFF_STEP_8MS; break;
+ case 16: t_off_step = T_OFF_STEP_16MS; break;
+ default: return -EINVAL;
+ }
+ }
+
+ ret = of_property_read_u32(i2c->dev.of_node, "nxp,restart-ms", &val);
+ if (ret == -EINVAL)
+ t_restart = T_RESTART_250MS;
+ else if (ret)
+ return ret;
+ else {
+ switch (val) {
+ case 250: t_restart = T_RESTART_250MS; break;
+ case 500: t_restart = T_RESTART_500MS; break;
+ default: return -EINVAL;
+ }
+ }
+
+ ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_PWRCTRL,
+ T_ON_DEB_MASK | T_OFF_DEB_MASK | T_ON_STEP_MASK |
+ T_OFF_STEP_MASK | T_RESTART_MASK,
+ t_on_deb | t_off_deb | t_on_step |
+ t_off_step | t_restart);
+ if (ret)
+ return dev_err_probe(&i2c->dev, ret,
+ "Failed to set PWR_CTRL debounce configuration\n");
+
+ if (of_property_read_bool(i2c->dev.of_node, "nxp,i2c-lt-enable")) {
+ /* Enable I2C Level Translator */
+ ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_CONFIG2,
+ I2C_LT_MASK, I2C_LT_ON_STANDBY_RUN);
+ if (ret)
+ return dev_err_probe(&i2c->dev, ret,
+ "Failed to enable I2C level translator\n");
+ }
+
+ return 0;
+}
+
static int pca9450_i2c_probe(struct i2c_client *i2c)
{
enum pca9450_chip_type type = (unsigned int)(uintptr_t)
of_device_get_match_data(&i2c->dev);
- const struct pca9450_regulator_desc *regulator_desc;
+ const struct pca9450_regulator_desc *regulator_desc;
struct regulator_config config = { };
+ struct regulator_dev *ldo5;
struct pca9450 *pca9450;
unsigned int device_id, i;
- unsigned int reset_ctrl;
int ret;
- if (!i2c->irq) {
- dev_err(&i2c->dev, "No IRQ configured?\n");
- return -EINVAL;
- }
-
pca9450 = devm_kzalloc(&i2c->dev, sizeof(struct pca9450), GFP_KERNEL);
if (!pca9450)
return -ENOMEM;
@@ -729,6 +1308,11 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
regulator_desc = pca9450bc_regulators;
pca9450->rcnt = ARRAY_SIZE(pca9450bc_regulators);
break;
+ case PCA9450_TYPE_PCA9451A:
+ case PCA9450_TYPE_PCA9452:
+ regulator_desc = pca9451a_regulators;
+ pca9450->rcnt = ARRAY_SIZE(pca9451a_regulators);
+ break;
default:
dev_err(&i2c->dev, "Unknown device type");
return -EINVAL;
@@ -742,24 +1326,21 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
pca9450->regmap = devm_regmap_init_i2c(i2c,
&pca9450_regmap_config);
- if (IS_ERR(pca9450->regmap)) {
- dev_err(&i2c->dev, "regmap initialization failed\n");
- return PTR_ERR(pca9450->regmap);
- }
+ if (IS_ERR(pca9450->regmap))
+ return dev_err_probe(&i2c->dev, PTR_ERR(pca9450->regmap),
+ "regmap initialization failed\n");
ret = regmap_read(pca9450->regmap, PCA9450_REG_DEV_ID, &device_id);
- if (ret) {
- dev_err(&i2c->dev, "Read device id error\n");
- return ret;
- }
+ if (ret)
+ return dev_err_probe(&i2c->dev, ret, "Read device id error\n");
/* Check your board and dts for match the right pmic */
if (((device_id >> 4) != 0x1 && type == PCA9450_TYPE_PCA9450A) ||
- ((device_id >> 4) != 0x3 && type == PCA9450_TYPE_PCA9450BC)) {
- dev_err(&i2c->dev, "Device id(%x) mismatched\n",
- device_id >> 4);
- return -EINVAL;
- }
+ ((device_id >> 4) != 0x3 && type == PCA9450_TYPE_PCA9450BC) ||
+ ((device_id >> 4) != 0x9 && type == PCA9450_TYPE_PCA9451A) ||
+ ((device_id >> 4) != 0x9 && type == PCA9450_TYPE_PCA9452))
+ return dev_err_probe(&i2c->dev, -EINVAL,
+ "Device id(%x) mismatched\n", device_id >> 4);
for (i = 0; i < pca9450->rcnt; i++) {
const struct regulator_desc *desc;
@@ -769,84 +1350,72 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
r = &regulator_desc[i];
desc = &r->desc;
+ if (type == PCA9450_TYPE_PCA9451A && !strcmp(desc->name, "ldo3"))
+ continue;
+
config.regmap = pca9450->regmap;
config.dev = pca9450->dev;
+ config.driver_data = pca9450;
rdev = devm_regulator_register(pca9450->dev, desc, &config);
- if (IS_ERR(rdev)) {
- ret = PTR_ERR(rdev);
- dev_err(pca9450->dev,
- "Failed to register regulator(%s): %d\n",
- desc->name, ret);
- return ret;
- }
- }
+ if (IS_ERR(rdev))
+ return dev_err_probe(pca9450->dev, PTR_ERR(rdev),
+ "Failed to register regulator(%s)\n", desc->name);
- ret = devm_request_threaded_irq(pca9450->dev, pca9450->irq, NULL,
- pca9450_irq_handler,
- (IRQF_TRIGGER_FALLING | IRQF_ONESHOT),
- "pca9450-irq", pca9450);
- if (ret != 0) {
- dev_err(pca9450->dev, "Failed to request IRQ: %d\n",
- pca9450->irq);
- return ret;
+ if (!strcmp(desc->name, "ldo5"))
+ ldo5 = rdev;
}
- /* Unmask all interrupt except PWRON/WDOG/RSVD */
- ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_INT1_MSK,
- IRQ_VR_FLT1 | IRQ_VR_FLT2 | IRQ_LOWVSYS |
- IRQ_THERM_105 | IRQ_THERM_125,
- IRQ_PWRON | IRQ_WDOGB | IRQ_RSVD);
- if (ret) {
- dev_err(&i2c->dev, "Unmask irq error\n");
- return ret;
+
+ if (pca9450->irq) {
+ ret = devm_request_threaded_irq(pca9450->dev, pca9450->irq, NULL,
+ pca9450_irq_handler,
+ (IRQF_TRIGGER_FALLING | IRQF_ONESHOT),
+ "pca9450-irq", pca9450);
+ if (ret != 0)
+ return dev_err_probe(pca9450->dev, ret, "Failed to request IRQ: %d\n",
+ pca9450->irq);
+
+ /* Unmask all interrupt except PWRON/WDOG/RSVD */
+ ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_INT1_MSK,
+ IRQ_VR_FLT1 | IRQ_VR_FLT2 | IRQ_LOWVSYS |
+ IRQ_THERM_105 | IRQ_THERM_125,
+ IRQ_PWRON | IRQ_WDOGB | IRQ_RSVD);
+ if (ret)
+ return dev_err_probe(&i2c->dev, ret, "Unmask irq error\n");
}
/* Clear PRESET_EN bit in BUCK123_DVS to use DVS registers */
ret = regmap_clear_bits(pca9450->regmap, PCA9450_REG_BUCK123_DVS,
BUCK123_PRESET_EN);
- if (ret) {
- dev_err(&i2c->dev, "Failed to clear PRESET_EN bit: %d\n", ret);
- return ret;
- }
+ if (ret)
+ return dev_err_probe(&i2c->dev, ret, "Failed to clear PRESET_EN bit\n");
- if (of_property_read_bool(i2c->dev.of_node, "nxp,wdog_b-warm-reset"))
- reset_ctrl = WDOG_B_CFG_WARM;
- else
- reset_ctrl = WDOG_B_CFG_COLD_LDO12;
-
- /* Set reset behavior on assertion of WDOG_B signal */
- ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_RESET_CTRL,
- WDOG_B_CFG_MASK, reset_ctrl);
- if (ret) {
- dev_err(&i2c->dev, "Failed to set WDOG_B reset behavior\n");
- return ret;
- }
-
- if (of_property_read_bool(i2c->dev.of_node, "nxp,i2c-lt-enable")) {
- /* Enable I2C Level Translator */
- ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_CONFIG2,
- I2C_LT_MASK, I2C_LT_ON_STANDBY_RUN);
- if (ret) {
- dev_err(&i2c->dev,
- "Failed to enable I2C level translator\n");
- return ret;
- }
- }
+ ret = pca9450_of_init(pca9450);
+ if (ret)
+ return dev_err_probe(&i2c->dev, ret, "Unable to parse OF data\n");
/*
- * The driver uses the LDO5CTRL_H register to control the LDO5 regulator.
- * This is only valid if the SD_VSEL input of the PMIC is high. Let's
- * check if the pin is available as GPIO and set it to high.
+ * For LDO5 we need to be able to check the status of the SD_VSEL input in
+ * order to know which control register is used. Most boards connect SD_VSEL
+ * to the VSELECT signal, so we can use the GPIO that is internally routed
+ * to this signal (if SION bit is set in IOMUX).
*/
- pca9450->sd_vsel_gpio = gpiod_get_optional(pca9450->dev, "sd-vsel", GPIOD_OUT_HIGH);
+ pca9450->sd_vsel_gpio = gpiod_get_optional(&ldo5->dev, "sd-vsel", GPIOD_IN);
+ if (IS_ERR(pca9450->sd_vsel_gpio))
+ return dev_err_probe(&i2c->dev, PTR_ERR(pca9450->sd_vsel_gpio),
+ "Failed to get SD_VSEL GPIO\n");
- if (IS_ERR(pca9450->sd_vsel_gpio)) {
- dev_err(&i2c->dev, "Failed to get SD_VSEL GPIO\n");
- return PTR_ERR(pca9450->sd_vsel_gpio);
- }
+ pca9450->sd_vsel_fixed_low =
+ of_property_read_bool(ldo5->dev.of_node, "nxp,sd-vsel-fixed-low");
+
+ if (devm_register_sys_off_handler(&i2c->dev, SYS_OFF_MODE_RESTART,
+ PCA9450_RESTART_HANDLER_PRIORITY,
+ pca9450_i2c_restart_handler, pca9450))
+ dev_warn(&i2c->dev, "Failed to register restart handler\n");
dev_info(&i2c->dev, "%s probed.\n",
- type == PCA9450_TYPE_PCA9450A ? "pca9450a" : "pca9450bc");
+ type == PCA9450_TYPE_PCA9450A ? "pca9450a" :
+ (type == PCA9450_TYPE_PCA9451A ? "pca9451a" : "pca9450bc"));
return 0;
}
@@ -864,6 +1433,14 @@ static const struct of_device_id pca9450_of_match[] = {
.compatible = "nxp,pca9450c",
.data = (void *)PCA9450_TYPE_PCA9450BC,
},
+ {
+ .compatible = "nxp,pca9451a",
+ .data = (void *)PCA9450_TYPE_PCA9451A,
+ },
+ {
+ .compatible = "nxp,pca9452",
+ .data = (void *)PCA9450_TYPE_PCA9452,
+ },
{ }
};
MODULE_DEVICE_TABLE(of, pca9450_of_match);
generated by cgit (git 2.34.1) at 2025-12-25 05:11:12 +0000