diff options
Diffstat (limited to 'drivers/reset/Kconfig')
| -rw-r--r-- | drivers/reset/Kconfig | 282 |
1 files changed, 251 insertions, 31 deletions
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 2e01bd833ffd..6e5d6deffa7d 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only config ARCH_HAS_RESET_CONTROLLER bool @@ -16,11 +17,18 @@ if RESET_CONTROLLER config RESET_A10SR tristate "Altera Arria10 System Resource Reset" - depends on MFD_ALTERA_A10SR + depends on MFD_ALTERA_A10SR || COMPILE_TEST help This option enables support for the external reset functions for peripheral PHYs on the Altera Arria10 System Resource Chip. +config RESET_ASPEED + tristate "ASPEED Reset Driver" + depends on ARCH_ASPEED || COMPILE_TEST + select AUXILIARY_BUS + help + This enables the reset controller driver for AST2700. + config RESET_ATH79 bool "AR71xx Reset Driver" if COMPILE_TEST default ATH79 @@ -34,12 +42,71 @@ config RESET_AXS10X help This enables the reset controller driver for AXS10x. +config RESET_BCM6345 + bool "BCM6345 Reset Controller" + depends on BMIPS_GENERIC || COMPILE_TEST + default BMIPS_GENERIC + help + This enables the reset controller driver for BCM6345 SoCs. + config RESET_BERLIN - bool "Berlin Reset Driver" if COMPILE_TEST - default ARCH_BERLIN + tristate "Berlin Reset Driver" + depends on ARCH_BERLIN || COMPILE_TEST + default m if ARCH_BERLIN help This enables the reset controller driver for Marvell Berlin SoCs. +config RESET_BRCMSTB + tristate "Broadcom STB reset controller" + depends on ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST + default ARCH_BRCMSTB || ARCH_BCM2835 + help + This enables the reset controller driver for Broadcom STB SoCs using + a SUN_TOP_CTRL_SW_INIT style controller. + +config RESET_BRCMSTB_RESCAL + tristate "Broadcom STB RESCAL reset controller" + depends on HAS_IOMEM + depends on ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST + default ARCH_BRCMSTB || ARCH_BCM2835 + help + This enables the RESCAL reset controller for SATA, PCIe0, or PCIe1 on + BCM7216 or the BCM2712. + +config RESET_EIC7700 + bool "Reset controller driver for ESWIN SoCs" + depends on ARCH_ESWIN || COMPILE_TEST + default ARCH_ESWIN + help + This enables the reset controller driver for ESWIN SoCs. This driver is + specific to ESWIN SoCs and should only be enabled if using such hardware. + The driver supports eic7700 series chips and provides functionality for + asserting and deasserting resets on the chip. + +config RESET_EYEQ + bool "Mobileye EyeQ reset controller" + depends on MACH_EYEQ5 || MACH_EYEQ6H || COMPILE_TEST + select AUXILIARY_BUS + default MACH_EYEQ5 || MACH_EYEQ6H + help + This enables the Mobileye EyeQ reset controller, used in EyeQ5, EyeQ6L + and EyeQ6H SoCs. + + It has one or more domains, with a varying number of resets in each. + Registers are located in a shared register region called OLB. EyeQ6H + has multiple reset instances. + +config RESET_GPIO + tristate "GPIO reset controller" + depends on GPIOLIB + select AUXILIARY_BUS + help + This enables a generic reset controller for resets attached via + GPIOs. Typically for OF platforms this driver expects "reset-gpios" + property. + + If compiled as module, it will be called reset-gpio. + config RESET_HSDK bool "Synopsys HSDK Reset Driver" depends on HAS_IOMEM @@ -47,14 +114,59 @@ config RESET_HSDK help This enables the reset controller driver for HSDK board. +config RESET_IMX_SCU + tristate "i.MX8Q Reset Driver" + depends on IMX_SCU && HAVE_ARM_SMCCC + depends on (ARM64 && ARCH_MXC) || COMPILE_TEST + help + This enables the reset controller driver for i.MX8QM/i.MX8QXP + config RESET_IMX7 - bool "i.MX7 Reset Driver" if COMPILE_TEST + tristate "i.MX7/8 Reset Driver" depends on HAS_IOMEM - default SOC_IMX7D + depends on SOC_IMX7D || (ARM64 && ARCH_MXC) || COMPILE_TEST + default y if SOC_IMX7D select MFD_SYSCON help This enables the reset controller driver for i.MX7 SoCs. +config RESET_IMX8MP_AUDIOMIX + tristate "i.MX8MP AudioMix Reset Driver" + depends on ARCH_MXC || COMPILE_TEST + select AUXILIARY_BUS + default CLK_IMX8MP + help + This enables the reset controller driver for i.MX8MP AudioMix + +config RESET_INTEL_GW + bool "Intel Reset Controller Driver" + depends on X86 || COMPILE_TEST + depends on OF && HAS_IOMEM + select REGMAP_MMIO + help + This enables the reset controller driver for Intel Gateway SoCs. + Say Y to control the reset signals provided by reset controller. + Otherwise, say N. + +config RESET_K210 + bool "Reset controller driver for Canaan Kendryte K210 SoC" + depends on (SOC_CANAAN_K210 || COMPILE_TEST) && OF + select MFD_SYSCON + default SOC_CANAAN_K210 + help + Support for the Canaan Kendryte K210 RISC-V SoC reset controller. + Say Y if you want to control reset signals provided by this + controller. + +config RESET_K230 + tristate "Reset controller driver for Canaan Kendryte K230 SoC" + depends on ARCH_CANAAN || COMPILE_TEST + depends on OF + help + Support for the Canaan Kendryte K230 RISC-V SoC reset controller. + Say Y if you want to control reset signals provided by this + controller. + config RESET_LANTIQ bool "Lantiq XWAY Reset Driver" if COMPILE_TEST default SOC_TYPE_XWAY @@ -67,30 +179,46 @@ config RESET_LPC18XX help This enables the reset controller driver for NXP LPC18xx/43xx SoCs. -config RESET_MESON - bool "Meson Reset Driver" if COMPILE_TEST - default ARCH_MESON +config RESET_MCHP_SPARX5 + tristate "Microchip Sparx5 reset driver" + depends on ARCH_SPARX5 || ARCH_LAN969X || SOC_LAN966 || MCHP_LAN966X_PCI || COMPILE_TEST + default y if SPARX5_SWITCH + select MFD_SYSCON help - This enables the reset driver for Amlogic Meson SoCs. + This driver supports switch core reset for the Microchip Sparx5 SoC. -config RESET_MESON_AUDIO_ARB - tristate "Meson Audio Memory Arbiter Reset Driver" - depends on ARCH_MESON || COMPILE_TEST +config RESET_NPCM + bool "NPCM BMC Reset Driver" if COMPILE_TEST + default ARCH_NPCM + select AUXILIARY_BUS help - This enables the reset driver for Audio Memory Arbiter of - Amlogic's A113 based SoCs + This enables the reset controller driver for Nuvoton NPCM + BMC SoCs. -config RESET_OXNAS - bool +config RESET_NUVOTON_MA35D1 + bool "Nuvoton MA35D1 Reset Driver" + depends on ARCH_MA35 || COMPILE_TEST + default ARCH_MA35 + help + This enables the reset controller driver for Nuvoton MA35D1 SoC. config RESET_PISTACHIO - bool "Pistachio Reset Driver" if COMPILE_TEST - default MACH_PISTACHIO + bool "Pistachio Reset Driver" + depends on MIPS || COMPILE_TEST help This enables the reset driver for ImgTec Pistachio SoCs. +config RESET_POLARFIRE_SOC + bool "Microchip PolarFire SoC (MPFS) Reset Driver" + depends on MCHP_CLK_MPFS + depends on MFD_SYSCON + select AUXILIARY_BUS + default MCHP_CLK_MPFS + help + This driver supports peripheral reset for the Microchip PolarFire SoC + config RESET_QCOM_AOSS - bool "Qcom AOSS Reset Driver" + tristate "Qcom AOSS Reset Driver" depends on ARCH_QCOM || COMPILE_TEST help This enables the AOSS (always on subsystem) reset driver @@ -107,9 +235,47 @@ config RESET_QCOM_PDC to control reset signals provided by PDC for Modem, Compute, Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS. +config RESET_RASPBERRYPI + tristate "Raspberry Pi 4 Firmware Reset Driver" + depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST) + default USB_XHCI_PCI + help + Raspberry Pi 4's co-processor controls some of the board's HW + initialization process, but it's up to Linux to trigger it when + relevant. This driver provides a reset controller capable of + interfacing with RPi4's co-processor and model these firmware + initialization routines as reset lines. + +config RESET_RZG2L_USBPHY_CTRL + tristate "Renesas RZ/G2L USBPHY control driver" + depends on ARCH_RZG2L || COMPILE_TEST + select MFD_SYSCON + help + Support for USBPHY Control found on RZ/G2L family. It mainly + controls reset and power down of the USB/PHY. + +config RESET_RZV2H_USB2PHY + tristate "Renesas RZ/V2H(P) (and similar SoCs) USB2PHY Reset driver" + depends on ARCH_RENESAS || COMPILE_TEST + help + Support for USB2PHY Port reset Control found on the RZ/V2H(P) SoC + (and similar SoCs). + +config RESET_SCMI + tristate "Reset driver controlled via ARM SCMI interface" + depends on ARM_SCMI_PROTOCOL || COMPILE_TEST + default ARM_SCMI_PROTOCOL + help + This driver provides support for reset signal/domains that are + controlled by firmware that implements the SCMI interface. + + This driver uses SCMI Message Protocol to interact with the + firmware controlling all the reset signals. + config RESET_SIMPLE - bool "Simple Reset Controller Driver" if COMPILE_TEST - default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED + bool "Simple Reset Controller Driver" if COMPILE_TEST || EXPERT + default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_SOPHGO || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC + depends on HAS_IOMEM help This enables a simple reset controller driver for reset lines that that can be asserted and deasserted by toggling bits in a contiguous, @@ -118,24 +284,39 @@ config RESET_SIMPLE Currently this driver supports: - Altera SoCFPGAs - ASPEED BMC SoCs + - Bitmain BM1880 SoC + - Realtek SoCs - RCC reset controller in STM32 MCUs - Allwinner SoCs - - ZTE's zx2967 family - -config RESET_STM32MP157 - bool "STM32MP157 Reset Driver" if COMPILE_TEST - default MACH_STM32MP157 - help - This enables the RCC reset controller driver for STM32 MPUs. + - SiFive FU740 SoCs + - Sophgo SoCs config RESET_SOCFPGA - bool "SoCFPGA Reset Driver" if COMPILE_TEST && !ARCH_SOCFPGA - default ARCH_SOCFPGA + bool "SoCFPGA Reset Driver" if COMPILE_TEST && (!ARM || !ARCH_INTEL_SOCFPGA) + default ARM && ARCH_INTEL_SOCFPGA select RESET_SIMPLE help This enables the reset driver for the SoCFPGA ARMv7 platforms. This driver gets initialized early during platform init calls. +config RESET_SPACEMIT + tristate "SpacemiT reset driver" + depends on ARCH_SPACEMIT || COMPILE_TEST + select AUXILIARY_BUS + default ARCH_SPACEMIT + help + This enables the reset controller driver for SpacemiT SoCs, + including the K1. + +config RESET_SUNPLUS + bool "Sunplus SoCs Reset Driver" if COMPILE_TEST + default ARCH_SUNPLUS + help + This enables the reset driver support for Sunplus SoCs. + The reset lines that can be asserted and deasserted by toggling bits + in a contiguous, exclusive register space. The register is HIWORD_MASKED, + which means each register holds 16 reset lines. + config RESET_SUNXI bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI default ARCH_SUNXI @@ -143,9 +324,19 @@ config RESET_SUNXI help This enables the reset driver for Allwinner SoCs. +config RESET_TH1520 + tristate "T-HEAD TH1520 reset controller" + depends on ARCH_THEAD || COMPILE_TEST + select REGMAP_MMIO + help + This driver provides support for the T-HEAD TH1520 SoC reset controller, + which manages hardware reset lines for SoC components such as the GPU. + Enable this option if you need to control hardware resets on TH1520-based + systems. + config RESET_TI_SCI tristate "TI System Control Interface (TI-SCI) reset driver" - depends on TI_SCI_PROTOCOL + depends on TI_SCI_PROTOCOL || (COMPILE_TEST && TI_SCI_PROTOCOL=n) help This enables the reset driver support over TI System Control Interface available on some new TI's SoCs. If you wish to use reset resources @@ -161,6 +352,27 @@ config RESET_TI_SYSCON you wish to use the reset framework for such memory-mapped devices, say Y here. Otherwise, say N. +config RESET_TI_TPS380X + tristate "TI TPS380x Reset Driver" + select GPIOLIB + help + This enables the reset driver support for TI TPS380x devices. If + you wish to use the reset framework for such devices, say Y here. + Otherwise, say N. + +config RESET_TN48M_CPLD + tristate "Delta Networks TN48M switch CPLD reset controller" + depends on MFD_TN48M_CPLD || COMPILE_TEST + default MFD_TN48M_CPLD + help + This enables the reset controller driver for the Delta TN48M CPLD. + It provides reset signals for Armada 7040 and 385 SoC-s, Alleycat 3X + switch MAC-s, Alaska OOB ethernet PHY, Quad Alaska ethernet PHY-s and + Microchip PD69200 PoE PSE controller. + + This driver can also be built as a module. If so, the module will be + called reset-tn48m. + config RESET_UNIPHIER tristate "Reset controller driver for UniPhier SoCs" depends on ARCH_UNIPHIER || COMPILE_TEST @@ -187,6 +399,14 @@ config RESET_ZYNQ help This enables the reset controller driver for Xilinx Zynq SoCs. +config RESET_ZYNQMP + bool "ZYNQMP Reset Driver" if COMPILE_TEST + default ARCH_ZYNQMP + help + This enables the reset controller driver for Xilinx ZynqMP SoCs. + +source "drivers/reset/amlogic/Kconfig" +source "drivers/reset/starfive/Kconfig" source "drivers/reset/sti/Kconfig" source "drivers/reset/hisilicon/Kconfig" source "drivers/reset/tegra/Kconfig" |