diff options
Diffstat (limited to 'drivers/reset/Kconfig')
| -rw-r--r-- | drivers/reset/Kconfig | 119 |
1 files changed, 98 insertions, 21 deletions
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 6bb5d9e372e4..6e5d6deffa7d 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -22,6 +22,13 @@ config RESET_A10SR This option enables support for the external reset functions for peripheral PHYs on the Altera Arria10 System Resource Chip. +config RESET_ASPEED + tristate "ASPEED Reset Driver" + depends on ARCH_ASPEED || COMPILE_TEST + select AUXILIARY_BUS + help + This enables the reset controller driver for AST2700. + config RESET_ATH79 bool "AR71xx Reset Driver" if COMPILE_TEST default ATH79 @@ -51,8 +58,8 @@ config RESET_BERLIN config RESET_BRCMSTB tristate "Broadcom STB reset controller" - depends on ARCH_BRCMSTB || COMPILE_TEST - default ARCH_BRCMSTB + depends on ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST + default ARCH_BRCMSTB || ARCH_BCM2835 help This enables the reset controller driver for Broadcom STB SoCs using a SUN_TOP_CTRL_SW_INIT style controller. @@ -60,15 +67,39 @@ config RESET_BRCMSTB config RESET_BRCMSTB_RESCAL tristate "Broadcom STB RESCAL reset controller" depends on HAS_IOMEM - depends on ARCH_BRCMSTB || COMPILE_TEST - default ARCH_BRCMSTB + depends on ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST + default ARCH_BRCMSTB || ARCH_BCM2835 help This enables the RESCAL reset controller for SATA, PCIe0, or PCIe1 on - BCM7216. + BCM7216 or the BCM2712. + +config RESET_EIC7700 + bool "Reset controller driver for ESWIN SoCs" + depends on ARCH_ESWIN || COMPILE_TEST + default ARCH_ESWIN + help + This enables the reset controller driver for ESWIN SoCs. This driver is + specific to ESWIN SoCs and should only be enabled if using such hardware. + The driver supports eic7700 series chips and provides functionality for + asserting and deasserting resets on the chip. + +config RESET_EYEQ + bool "Mobileye EyeQ reset controller" + depends on MACH_EYEQ5 || MACH_EYEQ6H || COMPILE_TEST + select AUXILIARY_BUS + default MACH_EYEQ5 || MACH_EYEQ6H + help + This enables the Mobileye EyeQ reset controller, used in EyeQ5, EyeQ6L + and EyeQ6H SoCs. + + It has one or more domains, with a varying number of resets in each. + Registers are located in a shared register region called OLB. EyeQ6H + has multiple reset instances. config RESET_GPIO tristate "GPIO reset controller" depends on GPIOLIB + select AUXILIARY_BUS help This enables a generic reset controller for resets attached via GPIOs. Typically for OF platforms this driver expects "reset-gpios" @@ -83,6 +114,13 @@ config RESET_HSDK help This enables the reset controller driver for HSDK board. +config RESET_IMX_SCU + tristate "i.MX8Q Reset Driver" + depends on IMX_SCU && HAVE_ARM_SMCCC + depends on (ARM64 && ARCH_MXC) || COMPILE_TEST + help + This enables the reset controller driver for i.MX8QM/i.MX8QXP + config RESET_IMX7 tristate "i.MX7/8 Reset Driver" depends on HAS_IOMEM @@ -92,6 +130,14 @@ config RESET_IMX7 help This enables the reset controller driver for i.MX7 SoCs. +config RESET_IMX8MP_AUDIOMIX + tristate "i.MX8MP AudioMix Reset Driver" + depends on ARCH_MXC || COMPILE_TEST + select AUXILIARY_BUS + default CLK_IMX8MP + help + This enables the reset controller driver for i.MX8MP AudioMix + config RESET_INTEL_GW bool "Intel Reset Controller Driver" depends on X86 || COMPILE_TEST @@ -112,6 +158,15 @@ config RESET_K210 Say Y if you want to control reset signals provided by this controller. +config RESET_K230 + tristate "Reset controller driver for Canaan Kendryte K230 SoC" + depends on ARCH_CANAAN || COMPILE_TEST + depends on OF + help + Support for the Canaan Kendryte K230 RISC-V SoC reset controller. + Say Y if you want to control reset signals provided by this + controller. + config RESET_LANTIQ bool "Lantiq XWAY Reset Driver" if COMPILE_TEST default SOC_TYPE_XWAY @@ -125,30 +180,17 @@ config RESET_LPC18XX This enables the reset controller driver for NXP LPC18xx/43xx SoCs. config RESET_MCHP_SPARX5 - bool "Microchip Sparx5 reset driver" - depends on ARCH_SPARX5 || SOC_LAN966 || COMPILE_TEST + tristate "Microchip Sparx5 reset driver" + depends on ARCH_SPARX5 || ARCH_LAN969X || SOC_LAN966 || MCHP_LAN966X_PCI || COMPILE_TEST default y if SPARX5_SWITCH select MFD_SYSCON help This driver supports switch core reset for the Microchip Sparx5 SoC. -config RESET_MESON - tristate "Meson Reset Driver" - depends on ARCH_MESON || COMPILE_TEST - default ARCH_MESON - help - This enables the reset driver for Amlogic Meson SoCs. - -config RESET_MESON_AUDIO_ARB - tristate "Meson Audio Memory Arbiter Reset Driver" - depends on ARCH_MESON || COMPILE_TEST - help - This enables the reset driver for Audio Memory Arbiter of - Amlogic's A113 based SoCs - config RESET_NPCM bool "NPCM BMC Reset Driver" if COMPILE_TEST default ARCH_NPCM + select AUXILIARY_BUS help This enables the reset controller driver for Nuvoton NPCM BMC SoCs. @@ -169,6 +211,7 @@ config RESET_PISTACHIO config RESET_POLARFIRE_SOC bool "Microchip PolarFire SoC (MPFS) Reset Driver" depends on MCHP_CLK_MPFS + depends on MFD_SYSCON select AUXILIARY_BUS default MCHP_CLK_MPFS help @@ -206,10 +249,18 @@ config RESET_RASPBERRYPI config RESET_RZG2L_USBPHY_CTRL tristate "Renesas RZ/G2L USBPHY control driver" depends on ARCH_RZG2L || COMPILE_TEST + select MFD_SYSCON help Support for USBPHY Control found on RZ/G2L family. It mainly controls reset and power down of the USB/PHY. +config RESET_RZV2H_USB2PHY + tristate "Renesas RZ/V2H(P) (and similar SoCs) USB2PHY Reset driver" + depends on ARCH_RENESAS || COMPILE_TEST + help + Support for USB2PHY Port reset Control found on the RZ/V2H(P) SoC + (and similar SoCs). + config RESET_SCMI tristate "Reset driver controlled via ARM SCMI interface" depends on ARM_SCMI_PROTOCOL || COMPILE_TEST @@ -248,6 +299,15 @@ config RESET_SOCFPGA This enables the reset driver for the SoCFPGA ARMv7 platforms. This driver gets initialized early during platform init calls. +config RESET_SPACEMIT + tristate "SpacemiT reset driver" + depends on ARCH_SPACEMIT || COMPILE_TEST + select AUXILIARY_BUS + default ARCH_SPACEMIT + help + This enables the reset controller driver for SpacemiT SoCs, + including the K1. + config RESET_SUNPLUS bool "Sunplus SoCs Reset Driver" if COMPILE_TEST default ARCH_SUNPLUS @@ -264,6 +324,16 @@ config RESET_SUNXI help This enables the reset driver for Allwinner SoCs. +config RESET_TH1520 + tristate "T-HEAD TH1520 reset controller" + depends on ARCH_THEAD || COMPILE_TEST + select REGMAP_MMIO + help + This driver provides support for the T-HEAD TH1520 SoC reset controller, + which manages hardware reset lines for SoC components such as the GPU. + Enable this option if you need to control hardware resets on TH1520-based + systems. + config RESET_TI_SCI tristate "TI System Control Interface (TI-SCI) reset driver" depends on TI_SCI_PROTOCOL || (COMPILE_TEST && TI_SCI_PROTOCOL=n) @@ -329,6 +399,13 @@ config RESET_ZYNQ help This enables the reset controller driver for Xilinx Zynq SoCs. +config RESET_ZYNQMP + bool "ZYNQMP Reset Driver" if COMPILE_TEST + default ARCH_ZYNQMP + help + This enables the reset controller driver for Xilinx ZynqMP SoCs. + +source "drivers/reset/amlogic/Kconfig" source "drivers/reset/starfive/Kconfig" source "drivers/reset/sti/Kconfig" source "drivers/reset/hisilicon/Kconfig" |