diff options
Diffstat (limited to 'drivers/scsi/Kconfig')
| -rw-r--r-- | drivers/scsi/Kconfig | 146 |
1 files changed, 74 insertions, 72 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index e9ff4cd5fbe9..19d0884479a2 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -2,9 +2,10 @@ menu "SCSI device support" config SCSI_MOD - tristate - default y if SCSI=n || SCSI=y - default m if SCSI=m + tristate + default y if SCSI=n || SCSI=y + default m if SCSI=m + depends on BLOCK config RAID_ATTRS tristate "RAID Transport Class" @@ -14,12 +15,16 @@ config RAID_ATTRS help Provides RAID +config SCSI_COMMON + tristate + config SCSI tristate "SCSI device support" depends on BLOCK select SCSI_DMA if HAS_DMA select SG_POOL - select BLK_SCSI_REQUEST + select SCSI_COMMON + select BLK_DEV_BSG_COMMON if BLK_DEV_BSG help If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or any other SCSI device under Linux, say Y and make sure that you know @@ -48,7 +53,7 @@ config SCSI_ESP_PIO config SCSI_NETLINK bool - default n + default n depends on NET config SCSI_PROC_FS @@ -62,13 +67,21 @@ config SCSI_PROC_FS If unsure say Y. +config SCSI_LIB_KUNIT_TEST + tristate "KUnit tests for SCSI Mid Layer's scsi_lib" if !KUNIT_ALL_TESTS + depends on KUNIT + default KUNIT_ALL_TESTS + help + Run SCSI Mid Layer's KUnit tests for scsi_lib. + + If unsure say N. + comment "SCSI support type (disk, tape, CD-ROM)" depends on SCSI config BLK_DEV_SD tristate "SCSI disk support" depends on SCSI - select BLK_DEV_INTEGRITY_T10 if BLK_DEV_INTEGRITY help If you want to use SCSI hard disks, Fibre Channel disks, Serial ATA (SATA) or Parallel ATA (PATA) hard disks, @@ -140,6 +153,18 @@ config CHR_DEV_SG If unsure, say N. +config BLK_DEV_BSG + bool "/dev/bsg support (SG v4)" + depends on SCSI + default y + help + Saying Y here will enable generic SG (SCSI generic) v4 support + for any SCSI device. + + This option is required by UDEV to access device serial numbers, etc. + + If unsure, say Y. + config CHR_DEV_SCH tristate "SCSI media changer support" depends on SCSI @@ -215,6 +240,11 @@ config SCSI_SCAN_ASYNC Note that this setting also affects whether resuming from system suspend will be performed asynchronously. +config SCSI_PROTO_TEST + tristate "scsi_proto.h unit tests" if !KUNIT_ALL_TESTS + depends on SCSI && KUNIT + default KUNIT_ALL_TESTS + menu "SCSI Transports" depends on SCSI @@ -273,9 +303,9 @@ if SCSI_LOWLEVEL && SCSI config ISCSI_TCP tristate "iSCSI Initiator over TCP/IP" depends on SCSI && INET + select CRC32 select CRYPTO select CRYPTO_MD5 - select CRYPTO_CRC32C select SCSI_ISCSI_ATTRS help The iSCSI Driver provides a host with the ability to access storage @@ -296,7 +326,7 @@ config ISCSI_TCP config ISCSI_BOOT_SYSFS tristate "iSCSI Boot Sysfs Interface" - default n + default n help This option enables support for exposing iSCSI boot information via sysfs to userspace. If you wish to export this information, @@ -306,18 +336,17 @@ source "drivers/scsi/cxgbi/Kconfig" source "drivers/scsi/bnx2i/Kconfig" source "drivers/scsi/bnx2fc/Kconfig" source "drivers/scsi/be2iscsi/Kconfig" -source "drivers/scsi/cxlflash/Kconfig" config SGIWD93_SCSI tristate "SGI WD93C93 SCSI Driver" depends on SGI_HAS_WD93 && SCSI - help + help If you have a Western Digital WD93 SCSI controller on an SGI MIPS system, say Y. Otherwise, say N. config BLK_DEV_3W_XXXX_RAID tristate "3ware 5/6/7/8xxx ATA-RAID support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI help 3ware is the only hardware ATA-Raid product in Linux to date. This card is 2,4, or 8 channel master mode support only. @@ -364,7 +393,7 @@ config SCSI_3W_SAS config SCSI_ACARD tristate "ACARD SCSI support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI help This driver supports the ACARD SCSI host adapter. Support Chip <ATP870 ATP876 ATP880 ATP885> @@ -374,6 +403,7 @@ config SCSI_ACARD config SCSI_AHA152X tristate "Adaptec AHA152X/2825 support" depends on ISA && SCSI + depends on !HIGHMEM select SCSI_SPI_ATTRS select CHECK_SIGNATURE help @@ -442,21 +472,10 @@ config SCSI_MVUMI To compile this driver as a module, choose M here: the module will be called mvumi. -config SCSI_DPT_I2O - tristate "Adaptec I2O RAID support " - depends on SCSI && PCI && VIRT_TO_BUS - help - This driver supports all of Adaptec's I2O based RAID controllers as - well as the DPT SmartRaid V cards. This is an Adaptec maintained - driver by Deanna Bonds. See <file:Documentation/scsi/dpti.rst>. - - To compile this driver as a module, choose M here: the - module will be called dpt_i2o. - config SCSI_ADVANSYS tristate "AdvanSys SCSI support" depends on SCSI - depends on ISA || EISA || PCI + depends on (ISA || EISA || PCI) && HAS_IOPORT depends on ISA_DMA_API || !ISA help This is a driver for all SCSI host adapters manufactured by @@ -482,8 +501,8 @@ config SCSI_ARCMSR source "drivers/scsi/esas2r/Kconfig" source "drivers/scsi/megaraid/Kconfig.megaraid" source "drivers/scsi/mpt3sas/Kconfig" +source "drivers/scsi/mpi3mr/Kconfig" source "drivers/scsi/smartpqi/Kconfig" -source "drivers/scsi/ufs/Kconfig" config SCSI_HPTIOP tristate "HighPoint RocketRAID 3xxx/4xxx Controller support" @@ -497,7 +516,7 @@ config SCSI_HPTIOP config SCSI_BUSLOGIC tristate "BusLogic SCSI support" - depends on (PCI || ISA) && SCSI && ISA_DMA_API && VIRT_TO_BUS + depends on SCSI && PCI && HAS_IOPORT help This is support for BusLogic MultiMaster and FlashPoint SCSI Host Adapters. Consult the SCSI-HOWTO, available from @@ -512,7 +531,7 @@ config SCSI_BUSLOGIC config SCSI_FLASHPOINT bool "FlashPoint support" - depends on SCSI_BUSLOGIC && PCI + depends on SCSI_BUSLOGIC && PCI && HAS_IOPORT help This option allows you to add FlashPoint support to the BusLogic SCSI driver. The FlashPoint SCCB Manager code is @@ -570,7 +589,7 @@ config XEN_SCSI_FRONTEND config HYPERV_STORAGE tristate "Microsoft Hyper-V virtual storage driver" - depends on SCSI && HYPERV + depends on SCSI && HYPERV_VMBUS depends on m || SCSI_FC_ATTRS != m default HYPERV help @@ -626,7 +645,7 @@ config SCSI_SNIC_DEBUG_FS config SCSI_DMX3191D tristate "DMX3191D SCSI support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI select SCSI_SPI_ATTRS help This is support for Domex DMX3191D SCSI Host Adapters. @@ -640,7 +659,7 @@ config SCSI_FDOMAIN config SCSI_FDOMAIN_PCI tristate "Future Domain TMC-3260/AHA-2920A PCI SCSI support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI select SCSI_FDOMAIN help This is support for Future Domain's PCI SCSI host adapters (TMC-3260) @@ -669,20 +688,6 @@ config SCSI_FDOMAIN_ISA To compile this driver as a module, choose M here: the module will be called fdomain_isa. -config SCSI_GDTH - tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support" - depends on PCI && SCSI - help - Formerly called GDT SCSI Disk Array Controller Support. - - This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI) - manufactured by Intel Corporation/ICP vortex GmbH. It is documented - in the kernel source in <file:drivers/scsi/gdth.c> and - <file:drivers/scsi/gdth.h>. - - To compile this driver as a module, choose M here: the - module will be called gdth. - config SCSI_ISCI tristate "Intel(R) C600 Series Chipset SAS Controller" depends on PCI && SCSI @@ -707,7 +712,7 @@ config SCSI_GENERIC_NCR5380 config SCSI_IPS tristate "IBM ServeRAID support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI help This is support for the IBM ServeRAID hardware RAID controllers. See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html> @@ -767,7 +772,7 @@ config SCSI_IBMVFC_TRACE config SCSI_INITIO tristate "Initio 9100U(W) support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI help This is support for the Initio 91XXU(W) SCSI host adapter. Please read the SCSI-HOWTO, available from @@ -778,7 +783,7 @@ config SCSI_INITIO config SCSI_INIA100 tristate "Initio INI-A100U2W support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI help This is support for the Initio INI-A100U2W SCSI host adapter. Please read the SCSI-HOWTO, available from @@ -790,6 +795,8 @@ config SCSI_INIA100 config SCSI_PPA tristate "IOMEGA parallel port (ppa - older drives)" depends on SCSI && PARPORT_PC + depends on HAS_IOPORT + depends on !HIGHMEM help This driver supports older versions of IOMEGA's parallel port ZIP drive (a 100 MB removable media device). @@ -817,6 +824,7 @@ config SCSI_PPA config SCSI_IMM tristate "IOMEGA parallel port (imm - newer drives)" depends on SCSI && PARPORT_PC + depends on !HIGHMEM help This driver supports newer versions of IOMEGA's parallel port ZIP drive (a 100 MB removable media device). @@ -841,21 +849,6 @@ config SCSI_IMM To compile this driver as a module, choose M here: the module will be called imm. -config SCSI_IZIP_EPP16 - bool "ppa/imm option - Use slow (but safe) EPP-16" - depends on SCSI_PPA || SCSI_IMM - help - EPP (Enhanced Parallel Port) is a standard for parallel ports which - allows them to act as expansion buses that can handle up to 64 - peripheral devices. - - Some parallel port chipsets are slower than their motherboard, and - so we have to control the state of the chipset's FIFO queue every - now and then to avoid data loss. This will be done if you say Y - here. - - Generally, saying Y is the safe option and slows things down a bit. - config SCSI_IZIP_SLOW_CTR bool "ppa/imm option - Assume slow parport control register" depends on SCSI_PPA || SCSI_IMM @@ -979,8 +972,7 @@ config SCSI_SYM53C8XX_MMIO config SCSI_IPR tristate "IBM Power Linux RAID adapter support" - depends on PCI && SCSI && ATA - select SATA_HOST + depends on PCI && SCSI select FW_LOADER select IRQ_POLL select SGL_ALLOC @@ -1154,10 +1146,12 @@ source "drivers/scsi/qedf/Kconfig" config SCSI_LPFC tristate "Emulex LightPulse Fibre Channel Support" depends on PCI && SCSI + depends on CPU_FREQ depends on SCSI_FC_ATTRS depends on NVME_TARGET_FC || NVME_TARGET_FC=n depends on NVME_FC || NVME_FC=n select CRC_T10DIF + select IRQ_POLL help This lpfc driver supports the Emulex LightPulse Family of Fibre Channel PCI host adapters. @@ -1169,6 +1163,8 @@ config SCSI_LPFC_DEBUG_FS This makes debugging information from the lpfc driver available via the debugfs filesystem. +source "drivers/scsi/elx/Kconfig" + config SCSI_SIM710 tristate "Simple 53c710 SCSI support (Compaq, NCR machines)" depends on EISA && SCSI @@ -1180,7 +1176,8 @@ config SCSI_SIM710 config SCSI_DC395x tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI + select SCSI_SPI_ATTRS help This driver supports PCI SCSI host adapters based on the ASIC TRM-S1040 chip, e.g Tekram DC395(U/UW/F) and DC315(U) variants. @@ -1211,7 +1208,7 @@ config SCSI_AM53C974 config SCSI_NSP32 tristate "Workbit NinjaSCSI-32Bi/UDE support" - depends on PCI && SCSI && !64BIT + depends on PCI && SCSI && !64BIT && HAS_IOPORT help This is support for the Workbit NinjaSCSI-32Bi/UDE PCI/Cardbus SCSI host adapter. Please read the SCSI-HOWTO, available from @@ -1288,7 +1285,7 @@ source "drivers/scsi/arm/Kconfig" config JAZZ_ESP bool "MIPS JAZZ FAS216 SCSI support" - depends on MACH_JAZZ && SCSI + depends on MACH_JAZZ && SCSI=y select SCSI_SPI_ATTRS help This is the driver for the onboard SCSI host adapter of MIPS Magnum @@ -1469,14 +1466,19 @@ config SCSI_SUNESP module will be called sun_esp. config ZFCP - tristate "FCP host bus adapter driver for IBM eServer zSeries" + tristate "FCP host bus adapter driver for IBM mainframes" depends on S390 && QDIO && SCSI depends on SCSI_FC_ATTRS help - If you want to access SCSI devices attached to your IBM eServer - zSeries by means of Fibre Channel interfaces say Y. - For details please refer to the documentation provided by IBM at - <http://oss.software.ibm.com/developerworks/opensource/linux390> + If you want to access SCSI devices attached to your IBM mainframe by + means of Fibre Channel Protocol host bus adapters say Y. + + Supported HBAs include different models of the FICON Express and FCP + Express I/O cards. + + For a more complete list, and for more details about setup and + operation refer to the IBM publication "Device Drivers, Features, and + Commands", SC33-8411. This driver is also available as a module. This module will be called zfcp. If you want to compile it as a module, say M here |