diff options
Diffstat (limited to 'drivers/scsi/Kconfig')
| -rw-r--r-- | drivers/scsi/Kconfig | 72 |
1 files changed, 36 insertions, 36 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 03e71e3d5e5b..19d0884479a2 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -53,7 +53,7 @@ config SCSI_ESP_PIO config SCSI_NETLINK bool - default n + default n depends on NET config SCSI_PROC_FS @@ -67,13 +67,21 @@ config SCSI_PROC_FS If unsure say Y. +config SCSI_LIB_KUNIT_TEST + tristate "KUnit tests for SCSI Mid Layer's scsi_lib" if !KUNIT_ALL_TESTS + depends on KUNIT + default KUNIT_ALL_TESTS + help + Run SCSI Mid Layer's KUnit tests for scsi_lib. + + If unsure say N. + comment "SCSI support type (disk, tape, CD-ROM)" depends on SCSI config BLK_DEV_SD tristate "SCSI disk support" depends on SCSI - select BLK_DEV_INTEGRITY_T10 if BLK_DEV_INTEGRITY help If you want to use SCSI hard disks, Fibre Channel disks, Serial ATA (SATA) or Parallel ATA (PATA) hard disks, @@ -232,6 +240,11 @@ config SCSI_SCAN_ASYNC Note that this setting also affects whether resuming from system suspend will be performed asynchronously. +config SCSI_PROTO_TEST + tristate "scsi_proto.h unit tests" if !KUNIT_ALL_TESTS + depends on SCSI && KUNIT + default KUNIT_ALL_TESTS + menu "SCSI Transports" depends on SCSI @@ -290,9 +303,9 @@ if SCSI_LOWLEVEL && SCSI config ISCSI_TCP tristate "iSCSI Initiator over TCP/IP" depends on SCSI && INET + select CRC32 select CRYPTO select CRYPTO_MD5 - select CRYPTO_CRC32C select SCSI_ISCSI_ATTRS help The iSCSI Driver provides a host with the ability to access storage @@ -313,7 +326,7 @@ config ISCSI_TCP config ISCSI_BOOT_SYSFS tristate "iSCSI Boot Sysfs Interface" - default n + default n help This option enables support for exposing iSCSI boot information via sysfs to userspace. If you wish to export this information, @@ -323,7 +336,6 @@ source "drivers/scsi/cxgbi/Kconfig" source "drivers/scsi/bnx2i/Kconfig" source "drivers/scsi/bnx2fc/Kconfig" source "drivers/scsi/be2iscsi/Kconfig" -source "drivers/scsi/cxlflash/Kconfig" config SGIWD93_SCSI tristate "SGI WD93C93 SCSI Driver" @@ -334,7 +346,7 @@ config SGIWD93_SCSI config BLK_DEV_3W_XXXX_RAID tristate "3ware 5/6/7/8xxx ATA-RAID support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI help 3ware is the only hardware ATA-Raid product in Linux to date. This card is 2,4, or 8 channel master mode support only. @@ -381,7 +393,7 @@ config SCSI_3W_SAS config SCSI_ACARD tristate "ACARD SCSI support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI help This driver supports the ACARD SCSI host adapter. Support Chip <ATP870 ATP876 ATP880 ATP885> @@ -391,6 +403,7 @@ config SCSI_ACARD config SCSI_AHA152X tristate "Adaptec AHA152X/2825 support" depends on ISA && SCSI + depends on !HIGHMEM select SCSI_SPI_ATTRS select CHECK_SIGNATURE help @@ -462,7 +475,7 @@ config SCSI_MVUMI config SCSI_ADVANSYS tristate "AdvanSys SCSI support" depends on SCSI - depends on ISA || EISA || PCI + depends on (ISA || EISA || PCI) && HAS_IOPORT depends on ISA_DMA_API || !ISA help This is a driver for all SCSI host adapters manufactured by @@ -503,7 +516,7 @@ config SCSI_HPTIOP config SCSI_BUSLOGIC tristate "BusLogic SCSI support" - depends on PCI && SCSI + depends on SCSI && PCI && HAS_IOPORT help This is support for BusLogic MultiMaster and FlashPoint SCSI Host Adapters. Consult the SCSI-HOWTO, available from @@ -518,7 +531,7 @@ config SCSI_BUSLOGIC config SCSI_FLASHPOINT bool "FlashPoint support" - depends on SCSI_BUSLOGIC && PCI + depends on SCSI_BUSLOGIC && PCI && HAS_IOPORT help This option allows you to add FlashPoint support to the BusLogic SCSI driver. The FlashPoint SCCB Manager code is @@ -576,7 +589,7 @@ config XEN_SCSI_FRONTEND config HYPERV_STORAGE tristate "Microsoft Hyper-V virtual storage driver" - depends on SCSI && HYPERV + depends on SCSI && HYPERV_VMBUS depends on m || SCSI_FC_ATTRS != m default HYPERV help @@ -632,7 +645,7 @@ config SCSI_SNIC_DEBUG_FS config SCSI_DMX3191D tristate "DMX3191D SCSI support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI select SCSI_SPI_ATTRS help This is support for Domex DMX3191D SCSI Host Adapters. @@ -646,7 +659,7 @@ config SCSI_FDOMAIN config SCSI_FDOMAIN_PCI tristate "Future Domain TMC-3260/AHA-2920A PCI SCSI support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI select SCSI_FDOMAIN help This is support for Future Domain's PCI SCSI host adapters (TMC-3260) @@ -699,7 +712,7 @@ config SCSI_GENERIC_NCR5380 config SCSI_IPS tristate "IBM ServeRAID support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI help This is support for the IBM ServeRAID hardware RAID controllers. See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html> @@ -759,7 +772,7 @@ config SCSI_IBMVFC_TRACE config SCSI_INITIO tristate "Initio 9100U(W) support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI help This is support for the Initio 91XXU(W) SCSI host adapter. Please read the SCSI-HOWTO, available from @@ -770,7 +783,7 @@ config SCSI_INITIO config SCSI_INIA100 tristate "Initio INI-A100U2W support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI help This is support for the Initio INI-A100U2W SCSI host adapter. Please read the SCSI-HOWTO, available from @@ -782,6 +795,8 @@ config SCSI_INIA100 config SCSI_PPA tristate "IOMEGA parallel port (ppa - older drives)" depends on SCSI && PARPORT_PC + depends on HAS_IOPORT + depends on !HIGHMEM help This driver supports older versions of IOMEGA's parallel port ZIP drive (a 100 MB removable media device). @@ -809,6 +824,7 @@ config SCSI_PPA config SCSI_IMM tristate "IOMEGA parallel port (imm - newer drives)" depends on SCSI && PARPORT_PC + depends on !HIGHMEM help This driver supports newer versions of IOMEGA's parallel port ZIP drive (a 100 MB removable media device). @@ -833,21 +849,6 @@ config SCSI_IMM To compile this driver as a module, choose M here: the module will be called imm. -config SCSI_IZIP_EPP16 - bool "ppa/imm option - Use slow (but safe) EPP-16" - depends on SCSI_PPA || SCSI_IMM - help - EPP (Enhanced Parallel Port) is a standard for parallel ports which - allows them to act as expansion buses that can handle up to 64 - peripheral devices. - - Some parallel port chipsets are slower than their motherboard, and - so we have to control the state of the chipset's FIFO queue every - now and then to avoid data loss. This will be done if you say Y - here. - - Generally, saying Y is the safe option and slows things down a bit. - config SCSI_IZIP_SLOW_CTR bool "ppa/imm option - Assume slow parport control register" depends on SCSI_PPA || SCSI_IMM @@ -971,8 +972,7 @@ config SCSI_SYM53C8XX_MMIO config SCSI_IPR tristate "IBM Power Linux RAID adapter support" - depends on PCI && SCSI && ATA - select SATA_HOST + depends on PCI && SCSI select FW_LOADER select IRQ_POLL select SGL_ALLOC @@ -1176,7 +1176,7 @@ config SCSI_SIM710 config SCSI_DC395x tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support" - depends on PCI && SCSI + depends on PCI && HAS_IOPORT && SCSI select SCSI_SPI_ATTRS help This driver supports PCI SCSI host adapters based on the ASIC @@ -1208,7 +1208,7 @@ config SCSI_AM53C974 config SCSI_NSP32 tristate "Workbit NinjaSCSI-32Bi/UDE support" - depends on PCI && SCSI && !64BIT + depends on PCI && SCSI && !64BIT && HAS_IOPORT help This is support for the Workbit NinjaSCSI-32Bi/UDE PCI/Cardbus SCSI host adapter. Please read the SCSI-HOWTO, available from @@ -1285,7 +1285,7 @@ source "drivers/scsi/arm/Kconfig" config JAZZ_ESP bool "MIPS JAZZ FAS216 SCSI support" - depends on MACH_JAZZ && SCSI + depends on MACH_JAZZ && SCSI=y select SCSI_SPI_ATTRS help This is the driver for the onboard SCSI host adapter of MIPS Magnum |