summaryrefslogtreecommitdiff
path: root/drivers/scsi/a100u2w.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/a100u2w.c')
-rw-r--r--drivers/scsi/a100u2w.c1202
1 files changed, 1202 insertions, 0 deletions
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
new file mode 100644
index 000000000000..c34403c30483
--- /dev/null
+++ b/drivers/scsi/a100u2w.c
@@ -0,0 +1,1202 @@
+/*
+ * Initio A100 device driver for Linux.
+ *
+ * Copyright (c) 1994-1998 Initio Corporation
+ * Copyright (c) 2003-2004 Christoph Hellwig
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * --------------------------------------------------------------------------
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification, immediately at the beginning of the file.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * Where this Software is combined with software released under the terms of
+ * the GNU General Public License ("GPL") and the terms of the GPL would require the
+ * combined work to also be released under the terms of the GPL, the terms
+ * and conditions of this License will apply in addition to those of the
+ * GPL with the exception of any terms or conditions of this License that
+ * conflict with, or are expressly prohibited by, the GPL.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/*
+ * Revision History:
+ * 07/02/98 hl - v.91n Initial drivers.
+ * 09/14/98 hl - v1.01 Support new Kernel.
+ * 09/22/98 hl - v1.01a Support reset.
+ * 09/24/98 hl - v1.01b Fixed reset.
+ * 10/05/98 hl - v1.02 split the source code and release.
+ * 12/19/98 bv - v1.02a Use spinlocks for 2.1.95 and up
+ * 01/31/99 bv - v1.02b Use mdelay instead of waitForPause
+ * 08/08/99 bv - v1.02c Use waitForPause again.
+ * 06/25/02 Doug Ledford <dledford@redhat.com> - v1.02d
+ * - Remove limit on number of controllers
+ * - Port to DMA mapping API
+ * - Clean up interrupt handler registration
+ * - Fix memory leaks
+ * - Fix allocation of scsi host structs and private data
+ * 11/18/03 Christoph Hellwig <hch@lst.de>
+ * - Port to new probing API
+ * - Fix some more leaks in init failure cases
+ * 9/28/04 Christoph Hellwig <hch@lst.de>
+ * - merge the two source files
+ * - remove internal queueing code
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/spinlock.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+
+#include "a100u2w.h"
+
+
+#define JIFFIES_TO_MS(t) ((t) * 1000 / HZ)
+#define MS_TO_JIFFIES(j) ((j * HZ) / 1000)
+
+static ORC_SCB *orc_alloc_scb(ORC_HCS * hcsp);
+static void inia100SCBPost(BYTE * pHcb, BYTE * pScb);
+
+static NVRAM nvram, *nvramp = &nvram;
+static UCHAR dftNvRam[64] =
+{
+/*----------header -------------*/
+ 0x01, /* 0x00: Sub System Vendor ID 0 */
+ 0x11, /* 0x01: Sub System Vendor ID 1 */
+ 0x60, /* 0x02: Sub System ID 0 */
+ 0x10, /* 0x03: Sub System ID 1 */
+ 0x00, /* 0x04: SubClass */
+ 0x01, /* 0x05: Vendor ID 0 */
+ 0x11, /* 0x06: Vendor ID 1 */
+ 0x60, /* 0x07: Device ID 0 */
+ 0x10, /* 0x08: Device ID 1 */
+ 0x00, /* 0x09: Reserved */
+ 0x00, /* 0x0A: Reserved */
+ 0x01, /* 0x0B: Revision of Data Structure */
+ /* -- Host Adapter Structure --- */
+ 0x01, /* 0x0C: Number Of SCSI Channel */
+ 0x01, /* 0x0D: BIOS Configuration 1 */
+ 0x00, /* 0x0E: BIOS Configuration 2 */
+ 0x00, /* 0x0F: BIOS Configuration 3 */
+ /* --- SCSI Channel 0 Configuration --- */
+ 0x07, /* 0x10: H/A ID */
+ 0x83, /* 0x11: Channel Configuration */
+ 0x20, /* 0x12: MAX TAG per target */
+ 0x0A, /* 0x13: SCSI Reset Recovering time */
+ 0x00, /* 0x14: Channel Configuration4 */
+ 0x00, /* 0x15: Channel Configuration5 */
+ /* SCSI Channel 0 Target Configuration */
+ /* 0x16-0x25 */
+ 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8,
+ 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8,
+ /* --- SCSI Channel 1 Configuration --- */
+ 0x07, /* 0x26: H/A ID */
+ 0x83, /* 0x27: Channel Configuration */
+ 0x20, /* 0x28: MAX TAG per target */
+ 0x0A, /* 0x29: SCSI Reset Recovering time */
+ 0x00, /* 0x2A: Channel Configuration4 */
+ 0x00, /* 0x2B: Channel Configuration5 */
+ /* SCSI Channel 1 Target Configuration */
+ /* 0x2C-0x3B */
+ 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8,
+ 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8,
+ 0x00, /* 0x3C: Reserved */
+ 0x00, /* 0x3D: Reserved */
+ 0x00, /* 0x3E: Reserved */
+ 0x00 /* 0x3F: Checksum */
+};
+
+
+/***************************************************************************/
+static void waitForPause(unsigned amount)
+{
+ ULONG the_time = jiffies + MS_TO_JIFFIES(amount);
+ while (time_before_eq(jiffies, the_time))
+ cpu_relax();
+}
+
+/***************************************************************************/
+static UCHAR waitChipReady(ORC_HCS * hcsp)
+{
+ int i;
+
+ for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */
+ if (ORC_RD(hcsp->HCS_Base, ORC_HCTRL) & HOSTSTOP) /* Wait HOSTSTOP set */
+ return 1;
+ waitForPause(100); /* wait 100ms before try again */
+ }
+ return 0;
+}
+
+/***************************************************************************/
+static UCHAR waitFWReady(ORC_HCS * hcsp)
+{
+ int i;
+
+ for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */
+ if (ORC_RD(hcsp->HCS_Base, ORC_HSTUS) & RREADY) /* Wait READY set */
+ return 1;
+ waitForPause(100); /* wait 100ms before try again */
+ }
+ return 0;
+}
+
+/***************************************************************************/
+static UCHAR waitSCSIRSTdone(ORC_HCS * hcsp)
+{
+ int i;
+
+ for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */
+ if (!(ORC_RD(hcsp->HCS_Base, ORC_HCTRL) & SCSIRST)) /* Wait SCSIRST done */
+ return 1;
+ waitForPause(100); /* wait 100ms before try again */
+ }
+ return 0;
+}
+
+/***************************************************************************/
+static UCHAR waitHDOoff(ORC_HCS * hcsp)
+{
+ int i;
+
+ for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */
+ if (!(ORC_RD(hcsp->HCS_Base, ORC_HCTRL) & HDO)) /* Wait HDO off */
+ return 1;
+ waitForPause(100); /* wait 100ms before try again */
+ }
+ return 0;
+}
+
+/***************************************************************************/
+static UCHAR waitHDIset(ORC_HCS * hcsp, UCHAR * pData)
+{
+ int i;
+
+ for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */
+ if ((*pData = ORC_RD(hcsp->HCS_Base, ORC_HSTUS)) & HDI)
+ return 1; /* Wait HDI set */
+ waitForPause(100); /* wait 100ms before try again */
+ }
+ return 0;
+}
+
+/***************************************************************************/
+static unsigned short get_FW_version(ORC_HCS * hcsp)
+{
+ UCHAR bData;
+ union {
+ unsigned short sVersion;
+ unsigned char cVersion[2];
+ } Version;
+
+ ORC_WR(hcsp->HCS_Base + ORC_HDATA, ORC_CMD_VERSION);
+ ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO);
+ if (waitHDOoff(hcsp) == 0) /* Wait HDO off */
+ return 0;
+
+ if (waitHDIset(hcsp, &bData) == 0) /* Wait HDI set */
+ return 0;
+ Version.cVersion[0] = ORC_RD(hcsp->HCS_Base, ORC_HDATA);
+ ORC_WR(hcsp->HCS_Base + ORC_HSTUS, bData); /* Clear HDI */
+
+ if (waitHDIset(hcsp, &bData) == 0) /* Wait HDI set */
+ return 0;
+ Version.cVersion[1] = ORC_RD(hcsp->HCS_Base, ORC_HDATA);
+ ORC_WR(hcsp->HCS_Base + ORC_HSTUS, bData); /* Clear HDI */
+
+ return (Version.sVersion);
+}
+
+/***************************************************************************/
+static UCHAR set_NVRAM(ORC_HCS * hcsp, unsigned char address, unsigned char value)
+{
+ ORC_WR(hcsp->HCS_Base + ORC_HDATA, ORC_CMD_SET_NVM); /* Write command */
+ ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO);
+ if (waitHDOoff(hcsp) == 0) /* Wait HDO off */
+ return 0;
+
+ ORC_WR(hcsp->HCS_Base + ORC_HDATA, address); /* Write address */
+ ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO);
+ if (waitHDOoff(hcsp) == 0) /* Wait HDO off */
+ return 0;
+
+ ORC_WR(hcsp->HCS_Base + ORC_HDATA, value); /* Write value */
+ ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO);
+ if (waitHDOoff(hcsp) == 0) /* Wait HDO off */
+ return 0;
+
+ return 1;
+}
+
+/***************************************************************************/
+static UCHAR get_NVRAM(ORC_HCS * hcsp, unsigned char address, unsigned char *pDataIn)
+{
+ unsigned char bData;
+
+ ORC_WR(hcsp->HCS_Base + ORC_HDATA, ORC_CMD_GET_NVM); /* Write command */
+ ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO);
+ if (waitHDOoff(hcsp) == 0) /* Wait HDO off */
+ return 0;
+
+ ORC_WR(hcsp->HCS_Base + ORC_HDATA, address); /* Write address */
+ ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO);
+ if (waitHDOoff(hcsp) == 0) /* Wait HDO off */
+ return 0;
+
+ if (waitHDIset(hcsp, &bData) == 0) /* Wait HDI set */
+ return 0;
+ *pDataIn = ORC_RD(hcsp->HCS_Base, ORC_HDATA);
+ ORC_WR(hcsp->HCS_Base + ORC_HSTUS, bData); /* Clear HDI */
+
+ return 1;
+}
+
+/***************************************************************************/
+static void orc_exec_scb(ORC_HCS * hcsp, ORC_SCB * scbp)
+{
+ scbp->SCB_Status = ORCSCB_POST;
+ ORC_WR(hcsp->HCS_Base + ORC_PQUEUE, scbp->SCB_ScbIdx);
+ return;
+}
+
+
+/***********************************************************************
+ Read SCSI H/A configuration parameters from serial EEPROM
+************************************************************************/
+static int se2_rd_all(ORC_HCS * hcsp)
+{
+ int i;
+ UCHAR *np, chksum = 0;
+
+ np = (UCHAR *) nvramp;
+ for (i = 0; i < 64; i++, np++) { /* <01> */
+ if (get_NVRAM(hcsp, (unsigned char) i, np) == 0)
+ return -1;
+// *np++ = get_NVRAM(hcsp, (unsigned char ) i);
+ }
+
+/*------ Is ckecksum ok ? ------*/
+ np = (UCHAR *) nvramp;
+ for (i = 0; i < 63; i++)
+ chksum += *np++;
+
+ if (nvramp->CheckSum != (UCHAR) chksum)
+ return -1;
+ return 1;
+}
+
+/************************************************************************
+ Update SCSI H/A configuration parameters from serial EEPROM
+*************************************************************************/
+static void se2_update_all(ORC_HCS * hcsp)
+{ /* setup default pattern */
+ int i;
+ UCHAR *np, *np1, chksum = 0;
+
+ /* Calculate checksum first */
+ np = (UCHAR *) dftNvRam;
+ for (i = 0; i < 63; i++)
+ chksum += *np++;
+ *np = chksum;
+
+ np = (UCHAR *) dftNvRam;
+ np1 = (UCHAR *) nvramp;
+ for (i = 0; i < 64; i++, np++, np1++) {
+ if (*np != *np1) {
+ set_NVRAM(hcsp, (unsigned char) i, *np);
+ }
+ }
+ return;
+}
+
+/*************************************************************************
+ Function name : read_eeprom
+**************************************************************************/
+static void read_eeprom(ORC_HCS * hcsp)
+{
+ if (se2_rd_all(hcsp) != 1) {
+ se2_update_all(hcsp); /* setup default pattern */
+ se2_rd_all(hcsp); /* load again */
+ }
+}
+
+
+/***************************************************************************/
+static UCHAR load_FW(ORC_HCS * hcsp)
+{
+ U32 dData;
+ USHORT wBIOSAddress;
+ USHORT i;
+ UCHAR *pData, bData;
+
+
+ bData = ORC_RD(hcsp->HCS_Base, ORC_GCFG);
+ ORC_WR(hcsp->HCS_Base + ORC_GCFG, bData | EEPRG); /* Enable EEPROM programming */
+ ORC_WR(hcsp->HCS_Base + ORC_EBIOSADR2, 0x00);
+ ORC_WRSHORT(hcsp->HCS_Base + ORC_EBIOSADR0, 0x00);
+ if (ORC_RD(hcsp->HCS_Base, ORC_EBIOSDATA) != 0x55) {
+ ORC_WR(hcsp->HCS_Base + ORC_GCFG, bData); /* Disable EEPROM programming */
+ return 0;
+ }
+ ORC_WRSHORT(hcsp->HCS_Base + ORC_EBIOSADR0, 0x01);
+ if (ORC_RD(hcsp->HCS_Base, ORC_EBIOSDATA) != 0xAA) {
+ ORC_WR(hcsp->HCS_Base + ORC_GCFG, bData); /* Disable EEPROM programming */
+ return 0;
+ }
+ ORC_WR(hcsp->HCS_Base + ORC_RISCCTL, PRGMRST | DOWNLOAD); /* Enable SRAM programming */
+ pData = (UCHAR *) & dData;
+ dData = 0; /* Initial FW address to 0 */
+ ORC_WRSHORT(hcsp->HCS_Base + ORC_EBIOSADR0, 0x10);
+ *pData = ORC_RD(hcsp->HCS_Base, ORC_EBIOSDATA); /* Read from BIOS */
+ ORC_WRSHORT(hcsp->HCS_Base + ORC_EBIOSADR0, 0x11);
+ *(pData + 1) = ORC_RD(hcsp->HCS_Base, ORC_EBIOSDATA); /* Read from BIOS */
+ ORC_WRSHORT(hcsp->HCS_Base + ORC_EBIOSADR0, 0x12);
+ *(pData + 2) = ORC_RD(hcsp->HCS_Base, ORC_EBIOSDATA); /* Read from BIOS */
+ ORC_WR(hcsp->HCS_Base + ORC_EBIOSADR2, *(pData + 2));
+ ORC_WRLONG(hcsp->HCS_Base + ORC_FWBASEADR, dData); /* Write FW address */
+
+ wBIOSAddress = (USHORT) dData; /* FW code locate at BIOS address + ? */
+ for (i = 0, pData = (UCHAR *) & dData; /* Download the code */
+ i < 0x1000; /* Firmware code size = 4K */
+ i++, wBIOSAddress++) {
+ ORC_WRSHORT(hcsp->HCS_Base + ORC_EBIOSADR0, wBIOSAddress);
+ *pData++ = ORC_RD(hcsp->HCS_Base, ORC_EBIOSDATA); /* Read from BIOS */
+ if ((i % 4) == 3) {
+ ORC_WRLONG(hcsp->HCS_Base + ORC_RISCRAM, dData); /* Write every 4 bytes */
+ pData = (UCHAR *) & dData;
+ }
+ }
+
+ ORC_WR(hcsp->HCS_Base + ORC_RISCCTL, PRGMRST | DOWNLOAD); /* Reset program count 0 */
+ wBIOSAddress -= 0x1000; /* Reset the BIOS adddress */
+ for (i = 0, pData = (UCHAR *) & dData; /* Check the code */
+ i < 0x1000; /* Firmware code size = 4K */
+ i++, wBIOSAddress++) {
+ ORC_WRSHORT(hcsp->HCS_Base + ORC_EBIOSADR0, wBIOSAddress);
+ *pData++ = ORC_RD(hcsp->HCS_Base, ORC_EBIOSDATA); /* Read from BIOS */
+ if ((i % 4) == 3) {
+ if (ORC_RDLONG(hcsp->HCS_Base, ORC_RISCRAM) != dData) {
+ ORC_WR(hcsp->HCS_Base + ORC_RISCCTL, PRGMRST); /* Reset program to 0 */
+ ORC_WR(hcsp->HCS_Base + ORC_GCFG, bData); /*Disable EEPROM programming */
+ return 0;
+ }
+ pData = (UCHAR *) & dData;
+ }
+ }
+ ORC_WR(hcsp->HCS_Base + ORC_RISCCTL, PRGMRST); /* Reset program to 0 */
+ ORC_WR(hcsp->HCS_Base + ORC_GCFG, bData); /* Disable EEPROM programming */
+ return 1;
+}
+
+/***************************************************************************/
+static void setup_SCBs(ORC_HCS * hcsp)
+{
+ ORC_SCB *pVirScb;
+ int i;
+ ESCB *pVirEscb;
+ dma_addr_t pPhysEscb;
+
+ /* Setup SCB HCS_Base and SCB Size registers */
+ ORC_WR(hcsp->HCS_Base + ORC_SCBSIZE, ORC_MAXQUEUE); /* Total number of SCBs */
+ /* SCB HCS_Base address 0 */
+ ORC_WRLONG(hcsp->HCS_Base + ORC_SCBBASE0, hcsp->HCS_physScbArray);
+ /* SCB HCS_Base address 1 */
+ ORC_WRLONG(hcsp->HCS_Base + ORC_SCBBASE1, hcsp->HCS_physScbArray);
+
+ /* setup scatter list address with one buffer */
+ pVirScb = hcsp->HCS_virScbArray;
+ pVirEscb = hcsp->HCS_virEscbArray;
+
+ for (i = 0; i < ORC_MAXQUEUE; i++) {
+ pPhysEscb = (hcsp->HCS_physEscbArray + (sizeof(ESCB) * i));
+ pVirScb->SCB_SGPAddr = (U32) pPhysEscb;
+ pVirScb->SCB_SensePAddr = (U32) pPhysEscb;
+ pVirScb->SCB_EScb = pVirEscb;
+ pVirScb->SCB_ScbIdx = i;
+ pVirScb++;
+ pVirEscb++;
+ }
+
+ return;
+}
+
+/***************************************************************************/
+static void initAFlag(ORC_HCS * hcsp)
+{
+ UCHAR i, j;
+
+ for (i = 0; i < MAX_CHANNELS; i++) {
+ for (j = 0; j < 8; j++) {
+ hcsp->BitAllocFlag[i][j] = 0xffffffff;
+ }
+ }
+}
+
+/***************************************************************************/
+static int init_orchid(ORC_HCS * hcsp)
+{
+ UBYTE *readBytep;
+ USHORT revision;
+ UCHAR i;
+
+ initAFlag(hcsp);
+ ORC_WR(hcsp->HCS_Base + ORC_GIMSK, 0xFF); /* Disable all interrupt */
+ if (ORC_RD(hcsp->HCS_Base, ORC_HSTUS) & RREADY) { /* Orchid is ready */
+ revision = get_FW_version(hcsp);
+ if (revision == 0xFFFF) {
+ ORC_WR(hcsp->HCS_Base + ORC_HCTRL, DEVRST); /* Reset Host Adapter */
+ if (waitChipReady(hcsp) == 0)
+ return (-1);
+ load_FW(hcsp); /* Download FW */
+ setup_SCBs(hcsp); /* Setup SCB HCS_Base and SCB Size registers */
+ ORC_WR(hcsp->HCS_Base + ORC_HCTRL, 0); /* clear HOSTSTOP */
+ if (waitFWReady(hcsp) == 0)
+ return (-1);
+ /* Wait for firmware ready */
+ } else {
+ setup_SCBs(hcsp); /* Setup SCB HCS_Base and SCB Size registers */
+ }
+ } else { /* Orchid is not Ready */
+ ORC_WR(hcsp->HCS_Base + ORC_HCTRL, DEVRST); /* Reset Host Adapter */
+ if (waitChipReady(hcsp) == 0)
+ return (-1);
+ load_FW(hcsp); /* Download FW */
+ setup_SCBs(hcsp); /* Setup SCB HCS_Base and SCB Size registers */
+ ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO); /* Do Hardware Reset & */
+
+ /* clear HOSTSTOP */
+ if (waitFWReady(hcsp) == 0) /* Wait for firmware ready */
+ return (-1);
+ }
+
+/*------------- get serial EEProm settting -------*/
+
+ read_eeprom(hcsp);
+
+ if (nvramp->Revision != 1)
+ return (-1);
+
+ hcsp->HCS_SCSI_ID = nvramp->SCSI0Id;
+ hcsp->HCS_BIOS = nvramp->BIOSConfig1;
+ hcsp->HCS_MaxTar = MAX_TARGETS;
+ readBytep = (UCHAR *) & (nvramp->Target00Config);
+ for (i = 0; i < 16; readBytep++, i++) {
+ hcsp->TargetFlag[i] = *readBytep;
+ hcsp->MaximumTags[i] = ORC_MAXTAGS;
+ } /* for */
+
+ if (nvramp->SCSI0Config & NCC_BUSRESET) { /* Reset SCSI bus */
+ hcsp->HCS_Flags |= HCF_SCSI_RESET;
+ }
+ ORC_WR(hcsp->HCS_Base + ORC_GIMSK, 0xFB); /* enable RP FIFO interrupt */
+ return (0);
+}
+
+/*****************************************************************************
+ Function name : orc_reset_scsi_bus
+ Description : Reset registers, reset a hanging bus and
+ kill active and disconnected commands for target w/o soft reset
+ Input : pHCB - Pointer to host adapter structure
+ Output : None.
+ Return : pSRB - Pointer to SCSI request block.
+*****************************************************************************/
+static int orc_reset_scsi_bus(ORC_HCS * pHCB)
+{ /* I need Host Control Block Information */
+ ULONG flags;
+
+ spin_lock_irqsave(&(pHCB->BitAllocFlagLock), flags);
+
+ initAFlag(pHCB);
+ /* reset scsi bus */
+ ORC_WR(pHCB->HCS_Base + ORC_HCTRL, SCSIRST);
+ if (waitSCSIRSTdone(pHCB) == 0) {
+ spin_unlock_irqrestore(&(pHCB->BitAllocFlagLock), flags);
+ return FAILED;
+ } else {
+ spin_unlock_irqrestore(&(pHCB->BitAllocFlagLock), flags);
+ return SUCCESS;
+ }
+}
+
+/*****************************************************************************
+ Function name : orc_device_reset
+ Description : Reset registers, reset a hanging bus and
+ kill active and disconnected commands for target w/o soft reset
+ Input : pHCB - Pointer to host adapter structure
+ Output : None.
+ Return : pSRB - Pointer to SCSI request block.
+*****************************************************************************/
+static int orc_device_reset(ORC_HCS * pHCB, struct scsi_cmnd *SCpnt, unsigned int target)
+{ /* I need Host Control Block Information */
+ ORC_SCB *pScb;
+ ESCB *pVirEscb;
+ ORC_SCB *pVirScb;
+ UCHAR i;
+ ULONG flags;
+
+ spin_lock_irqsave(&(pHCB->BitAllocFlagLock), flags);
+ pScb = (ORC_SCB *) NULL;
+ pVirEscb = (ESCB *) NULL;
+
+ /* setup scatter list address with one buffer */
+ pVirScb = pHCB->HCS_virScbArray;
+
+ initAFlag(pHCB);
+ /* device reset */
+ for (i = 0; i < ORC_MAXQUEUE; i++) {
+ pVirEscb = pVirScb->SCB_EScb;
+ if ((pVirScb->SCB_Status) && (pVirEscb->SCB_Srb == SCpnt))
+ break;
+ pVirScb++;
+ }
+
+ if (i == ORC_MAXQUEUE) {
+ printk("Unable to Reset - No SCB Found\n");
+ spin_unlock_irqrestore(&(pHCB->BitAllocFlagLock), flags);
+ return FAILED;
+ }
+ if ((pScb = orc_alloc_scb(pHCB)) == NULL) {
+ spin_unlock_irqrestore(&(pHCB->BitAllocFlagLock), flags);
+ return FAILED;
+ }
+ pScb->SCB_Opcode = ORC_BUSDEVRST;
+ pScb->SCB_Target = target;
+ pScb->SCB_HaStat = 0;
+ pScb->SCB_TaStat = 0;
+ pScb->SCB_Status = 0x0;
+ pScb->SCB_Link = 0xFF;
+ pScb->SCB_Reserved0 = 0;
+ pScb->SCB_Reserved1 = 0;
+ pScb->SCB_XferLen = 0;
+ pScb->SCB_SGLen = 0;
+
+ pVirEscb->SCB_Srb = NULL;
+ pVirEscb->SCB_Srb = SCpnt;
+ orc_exec_scb(pHCB, pScb); /* Start execute SCB */
+ spin_unlock_irqrestore(&(pHCB->BitAllocFlagLock), flags);
+ return SUCCESS;
+}
+
+
+/***************************************************************************/
+static ORC_SCB *__orc_alloc_scb(ORC_HCS * hcsp)
+{
+ ORC_SCB *pTmpScb;
+ UCHAR Ch;
+ ULONG idx;
+ UCHAR index;
+ UCHAR i;
+
+ Ch = hcsp->HCS_Index;
+ for (i = 0; i < 8; i++) {
+ for (index = 0; index < 32; index++) {
+ if ((hcsp->BitAllocFlag[Ch][i] >> index) & 0x01) {
+ hcsp->BitAllocFlag[Ch][i] &= ~(1 << index);
+ break;
+ }
+ }
+ idx = index + 32 * i;
+ pTmpScb = (ORC_SCB *) ((ULONG) hcsp->HCS_virScbArray + (idx * sizeof(ORC_SCB)));
+ return (pTmpScb);
+ }
+ return (NULL);
+}
+
+static ORC_SCB *orc_alloc_scb(ORC_HCS * hcsp)
+{
+ ORC_SCB *pTmpScb;
+ ULONG flags;
+
+ spin_lock_irqsave(&(hcsp->BitAllocFlagLock), flags);
+ pTmpScb = __orc_alloc_scb(hcsp);
+ spin_unlock_irqrestore(&(hcsp->BitAllocFlagLock), flags);
+ return (pTmpScb);
+}
+
+
+/***************************************************************************/
+static void orc_release_scb(ORC_HCS * hcsp, ORC_SCB * scbp)
+{
+ ULONG flags;
+ UCHAR Index;
+ UCHAR i;
+ UCHAR Ch;
+
+ spin_lock_irqsave(&(hcsp->BitAllocFlagLock), flags);
+ Ch = hcsp->HCS_Index;
+ Index = scbp->SCB_ScbIdx;
+ i = Index / 32;
+ Index %= 32;
+ hcsp->BitAllocFlag[Ch][i] |= (1 << Index);
+ spin_unlock_irqrestore(&(hcsp->BitAllocFlagLock), flags);
+}
+
+/*****************************************************************************
+ Function name : abort_SCB
+ Description : Abort a queued command.
+ (commands that are on the bus can't be aborted easily)
+ Input : pHCB - Pointer to host adapter structure
+ Output : None.
+ Return : pSRB - Pointer to SCSI request block.
+*****************************************************************************/
+static int abort_SCB(ORC_HCS * hcsp, ORC_SCB * pScb)
+{
+ unsigned char bData, bStatus;
+
+ ORC_WR(hcsp->HCS_Base + ORC_HDATA, ORC_CMD_ABORT_SCB); /* Write command */
+ ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO);
+ if (waitHDOoff(hcsp) == 0) /* Wait HDO off */
+ return 0;
+
+ ORC_WR(hcsp->HCS_Base + ORC_HDATA, pScb->SCB_ScbIdx); /* Write address */
+ ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO);
+ if (waitHDOoff(hcsp) == 0) /* Wait HDO off */
+ return 0;
+
+ if (waitHDIset(hcsp, &bData) == 0) /* Wait HDI set */
+ return 0;
+ bStatus = ORC_RD(hcsp->HCS_Base, ORC_HDATA);
+ ORC_WR(hcsp->HCS_Base + ORC_HSTUS, bData); /* Clear HDI */
+
+ if (bStatus == 1) /* 0 - Successfully */
+ return 0; /* 1 - Fail */
+ return 1;
+}
+
+/*****************************************************************************
+ Function name : inia100_abort
+ Description : Abort a queued command.
+ (commands that are on the bus can't be aborted easily)
+ Input : pHCB - Pointer to host adapter structure
+ Output : None.
+ Return : pSRB - Pointer to SCSI request block.
+*****************************************************************************/
+static int orc_abort_srb(ORC_HCS * hcsp, struct scsi_cmnd *SCpnt)
+{
+ ESCB *pVirEscb;
+ ORC_SCB *pVirScb;
+ UCHAR i;
+ ULONG flags;
+
+ spin_lock_irqsave(&(hcsp->BitAllocFlagLock), flags);
+
+ pVirScb = hcsp->HCS_virScbArray;
+
+ for (i = 0; i < ORC_MAXQUEUE; i++, pVirScb++) {
+ pVirEscb = pVirScb->SCB_EScb;
+ if ((pVirScb->SCB_Status) && (pVirEscb->SCB_Srb == SCpnt)) {
+ if (pVirScb->SCB_TagMsg == 0) {
+ spin_unlock_irqrestore(&(hcsp->BitAllocFlagLock), flags);
+ return FAILED;
+ } else {
+ if (abort_SCB(hcsp, pVirScb)) {
+ pVirEscb->SCB_Srb = NULL;
+ spin_unlock_irqrestore(&(hcsp->BitAllocFlagLock), flags);
+ return SUCCESS;
+ } else {
+ spin_unlock_irqrestore(&(hcsp->BitAllocFlagLock), flags);
+ return FAILED;
+ }
+ }
+ }
+ }
+ spin_unlock_irqrestore(&(hcsp->BitAllocFlagLock), flags);
+ return FAILED;
+}
+
+/***********************************************************************
+ Routine Description:
+ This is the interrupt service routine for the Orchid SCSI adapter.
+ It reads the interrupt register to determine if the adapter is indeed
+ the source of the interrupt and clears the interrupt at the device.
+ Arguments:
+ HwDeviceExtension - HBA miniport driver's adapter data storage
+ Return Value:
+***********************************************************************/
+static void orc_interrupt(
+ ORC_HCS * hcsp
+)
+{
+ BYTE bScbIdx;
+ ORC_SCB *pScb;
+
+ if (ORC_RD(hcsp->HCS_Base, ORC_RQUEUECNT) == 0) {
+ return; // 0;
+
+ }
+ do {
+ bScbIdx = ORC_RD(hcsp->HCS_Base, ORC_RQUEUE);
+
+ pScb = (ORC_SCB *) ((ULONG) hcsp->HCS_virScbArray + (ULONG) (sizeof(ORC_SCB) * bScbIdx));
+ pScb->SCB_Status = 0x0;
+
+ inia100SCBPost((BYTE *) hcsp, (BYTE *) pScb);
+ } while (ORC_RD(hcsp->HCS_Base, ORC_RQUEUECNT));
+ return; //1;
+
+} /* End of I1060Interrupt() */
+
+/*****************************************************************************
+ Function name : inia100BuildSCB
+ Description :
+ Input : pHCB - Pointer to host adapter structure
+ Output : None.
+ Return : pSRB - Pointer to SCSI request block.
+*****************************************************************************/
+static void inia100BuildSCB(ORC_HCS * pHCB, ORC_SCB * pSCB, struct scsi_cmnd * SCpnt)
+{ /* Create corresponding SCB */
+ struct scatterlist *pSrbSG;
+ ORC_SG *pSG; /* Pointer to SG list */
+ int i, count_sg;
+ ESCB *pEScb;
+
+ pEScb = pSCB->SCB_EScb;
+ pEScb->SCB_Srb = SCpnt;
+ pSG = NULL;
+
+ pSCB->SCB_Opcode = ORC_EXECSCSI;
+ pSCB->SCB_Flags = SCF_NO_DCHK; /* Clear done bit */
+ pSCB->SCB_Target = SCpnt->device->id;
+ pSCB->SCB_Lun = SCpnt->device->lun;
+ pSCB->SCB_Reserved0 = 0;
+ pSCB->SCB_Reserved1 = 0;
+ pSCB->SCB_SGLen = 0;
+
+ if ((pSCB->SCB_XferLen = (U32) SCpnt->request_bufflen)) {
+ pSG = (ORC_SG *) & pEScb->ESCB_SGList[0];
+ if (SCpnt->use_sg) {
+ pSrbSG = (struct scatterlist *) SCpnt->request_buffer;
+ count_sg = pci_map_sg(pHCB->pdev, pSrbSG, SCpnt->use_sg,
+ SCpnt->sc_data_direction);
+ pSCB->SCB_SGLen = (U32) (count_sg * 8);
+ for (i = 0; i < count_sg; i++, pSG++, pSrbSG++) {
+ pSG->SG_Ptr = (U32) sg_dma_address(pSrbSG);
+ pSG->SG_Len = (U32) sg_dma_len(pSrbSG);
+ }
+ } else if (SCpnt->request_bufflen != 0) {/* Non SG */
+ pSCB->SCB_SGLen = 0x8;
+ SCpnt->SCp.dma_handle = pci_map_single(pHCB->pdev,
+ SCpnt->request_buffer,
+ SCpnt->request_bufflen,
+ SCpnt->sc_data_direction);
+ pSG->SG_Ptr = (U32) SCpnt->SCp.dma_handle;
+ pSG->SG_Len = (U32) SCpnt->request_bufflen;
+ } else {
+ pSCB->SCB_SGLen = 0;
+ pSG->SG_Ptr = 0;
+ pSG->SG_Len = 0;
+ }
+ }
+ pSCB->SCB_SGPAddr = (U32) pSCB->SCB_SensePAddr;
+ pSCB->SCB_HaStat = 0;
+ pSCB->SCB_TaStat = 0;
+ pSCB->SCB_Link = 0xFF;
+ pSCB->SCB_SenseLen = SENSE_SIZE;
+ pSCB->SCB_CDBLen = SCpnt->cmd_len;
+ if (pSCB->SCB_CDBLen >= IMAX_CDB) {
+ printk("max cdb length= %x\b", SCpnt->cmd_len);
+ pSCB->SCB_CDBLen = IMAX_CDB;
+ }
+ pSCB->SCB_Ident = SCpnt->device->lun | DISC_ALLOW;
+ if (SCpnt->device->tagged_supported) { /* Tag Support */
+ pSCB->SCB_TagMsg = SIMPLE_QUEUE_TAG; /* Do simple tag only */
+ } else {
+ pSCB->SCB_TagMsg = 0; /* No tag support */
+ }
+ memcpy(&pSCB->SCB_CDB[0], &SCpnt->cmnd, pSCB->SCB_CDBLen);
+ return;
+}
+
+/*****************************************************************************
+ Function name : inia100_queue
+ Description : Queue a command and setup interrupts for a free bus.
+ Input : pHCB - Pointer to host adapter structure
+ Output : None.
+ Return : pSRB - Pointer to SCSI request block.
+*****************************************************************************/
+static int inia100_queue(struct scsi_cmnd * SCpnt, void (*done) (struct scsi_cmnd *))
+{
+ register ORC_SCB *pSCB;
+ ORC_HCS *pHCB; /* Point to Host adapter control block */
+
+ pHCB = (ORC_HCS *) SCpnt->device->host->hostdata;
+ SCpnt->scsi_done = done;
+ /* Get free SCSI control block */
+ if ((pSCB = orc_alloc_scb(pHCB)) == NULL)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ inia100BuildSCB(pHCB, pSCB, SCpnt);
+ orc_exec_scb(pHCB, pSCB); /* Start execute SCB */
+
+ return (0);
+}
+
+/*****************************************************************************
+ Function name : inia100_abort
+ Description : Abort a queued command.
+ (commands that are on the bus can't be aborted easily)
+ Input : pHCB - Pointer to host adapter structure
+ Output : None.
+ Return : pSRB - Pointer to SCSI request block.
+*****************************************************************************/
+static int inia100_abort(struct scsi_cmnd * SCpnt)
+{
+ ORC_HCS *hcsp;
+
+ hcsp = (ORC_HCS *) SCpnt->device->host->hostdata;
+ return orc_abort_srb(hcsp, SCpnt);
+}
+
+/*****************************************************************************
+ Function name : inia100_reset
+ Description : Reset registers, reset a hanging bus and
+ kill active and disconnected commands for target w/o soft reset
+ Input : pHCB - Pointer to host adapter structure
+ Output : None.
+ Return : pSRB - Pointer to SCSI request block.
+*****************************************************************************/
+static int inia100_bus_reset(struct scsi_cmnd * SCpnt)
+{ /* I need Host Control Block Information */
+ ORC_HCS *pHCB;
+ pHCB = (ORC_HCS *) SCpnt->device->host->hostdata;
+ return orc_reset_scsi_bus(pHCB);
+}
+
+/*****************************************************************************
+ Function name : inia100_device_reset
+ Description : Reset the device
+ Input : pHCB - Pointer to host adapter structure
+ Output : None.
+ Return : pSRB - Pointer to SCSI request block.
+*****************************************************************************/
+static int inia100_device_reset(struct scsi_cmnd * SCpnt)
+{ /* I need Host Control Block Information */
+ ORC_HCS *pHCB;
+ pHCB = (ORC_HCS *) SCpnt->device->host->hostdata;
+ return orc_device_reset(pHCB, SCpnt, SCpnt->device->id);
+
+}
+
+/*****************************************************************************
+ Function name : inia100SCBPost
+ Description : This is callback routine be called when orc finish one
+ SCSI command.
+ Input : pHCB - Pointer to host adapter control block.
+ pSCB - Pointer to SCSI control block.
+ Output : None.
+ Return : None.
+*****************************************************************************/
+static void inia100SCBPost(BYTE * pHcb, BYTE * pScb)
+{
+ struct scsi_cmnd *pSRB; /* Pointer to SCSI request block */
+ ORC_HCS *pHCB;
+ ORC_SCB *pSCB;
+ ESCB *pEScb;
+
+ pHCB = (ORC_HCS *) pHcb;
+ pSCB = (ORC_SCB *) pScb;
+ pEScb = pSCB->SCB_EScb;
+ if ((pSRB = (struct scsi_cmnd *) pEScb->SCB_Srb) == 0) {
+ printk("inia100SCBPost: SRB pointer is empty\n");
+ orc_release_scb(pHCB, pSCB); /* Release SCB for current channel */
+ return;
+ }
+ pEScb->SCB_Srb = NULL;
+
+ switch (pSCB->SCB_HaStat) {
+ case 0x0:
+ case 0xa: /* Linked command complete without error and linked normally */
+ case 0xb: /* Linked command complete without error interrupt generated */
+ pSCB->SCB_HaStat = 0;
+ break;
+
+ case 0x11: /* Selection time out-The initiator selection or target
+ reselection was not complete within the SCSI Time out period */
+ pSCB->SCB_HaStat = DID_TIME_OUT;
+ break;
+
+ case 0x14: /* Target bus phase sequence failure-An invalid bus phase or bus
+ phase sequence was requested by the target. The host adapter
+ will generate a SCSI Reset Condition, notifying the host with
+ a SCRD interrupt */
+ pSCB->SCB_HaStat = DID_RESET;
+ break;
+
+ case 0x1a: /* SCB Aborted. 07/21/98 */
+ pSCB->SCB_HaStat = DID_ABORT;
+ break;
+
+ case 0x12: /* Data overrun/underrun-The target attempted to transfer more data
+ than was allocated by the Data Length field or the sum of the
+ Scatter / Gather Data Length fields. */
+ case 0x13: /* Unexpected bus free-The target dropped the SCSI BSY at an unexpected time. */
+ case 0x16: /* Invalid CCB Operation Code-The first byte of the CCB was invalid. */
+
+ default:
+ printk("inia100: %x %x\n", pSCB->SCB_HaStat, pSCB->SCB_TaStat);
+ pSCB->SCB_HaStat = DID_ERROR; /* Couldn't find any better */
+ break;
+ }
+
+ if (pSCB->SCB_TaStat == 2) { /* Check condition */
+ memcpy((unsigned char *) &pSRB->sense_buffer[0],
+ (unsigned char *) &pEScb->ESCB_SGList[0], SENSE_SIZE);
+ }
+ pSRB->result = pSCB->SCB_TaStat | (pSCB->SCB_HaStat << 16);
+
+ if (pSRB->use_sg) {
+ pci_unmap_sg(pHCB->pdev,
+ (struct scatterlist *)pSRB->request_buffer,
+ pSRB->use_sg, pSRB->sc_data_direction);
+ } else if (pSRB->request_bufflen != 0) {
+ pci_unmap_single(pHCB->pdev, pSRB->SCp.dma_handle,
+ pSRB->request_bufflen,
+ pSRB->sc_data_direction);
+ }
+
+ pSRB->scsi_done(pSRB); /* Notify system DONE */
+
+ orc_release_scb(pHCB, pSCB); /* Release SCB for current channel */
+}
+
+/*
+ * Interrupt handler (main routine of the driver)
+ */
+static irqreturn_t inia100_intr(int irqno, void *devid, struct pt_regs *regs)
+{
+ struct Scsi_Host *host = (struct Scsi_Host *)devid;
+ ORC_HCS *pHcb = (ORC_HCS *)host->hostdata;
+ unsigned long flags;
+
+ spin_lock_irqsave(host->host_lock, flags);
+ orc_interrupt(pHcb);
+ spin_unlock_irqrestore(host->host_lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static struct scsi_host_template inia100_template = {
+ .proc_name = "inia100",
+ .name = inia100_REVID,
+ .queuecommand = inia100_queue,
+ .eh_abort_handler = inia100_abort,
+ .eh_bus_reset_handler = inia100_bus_reset,
+ .eh_device_reset_handler = inia100_device_reset,
+ .can_queue = 1,
+ .this_id = 1,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = 1,
+ .use_clustering = ENABLE_CLUSTERING,
+};
+
+static int __devinit inia100_probe_one(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct Scsi_Host *shost;
+ ORC_HCS *pHCB;
+ unsigned long port, bios;
+ int error = -ENODEV;
+ u32 sz;
+ unsigned long dBiosAdr;
+ char *pbBiosAdr;
+
+ if (pci_enable_device(pdev))
+ goto out;
+ if (pci_set_dma_mask(pdev, 0xffffffffULL)) {
+ printk(KERN_WARNING "Unable to set 32bit DMA "
+ "on inia100 adapter, ignoring.\n");
+ goto out_disable_device;
+ }
+
+ pci_set_master(pdev);
+
+ port = pci_resource_start(pdev, 0);
+ if (!request_region(port, 256, "inia100")) {
+ printk(KERN_WARNING "inia100: io port 0x%lx, is busy.\n", port);
+ goto out_disable_device;
+ }
+
+ /* <02> read from base address + 0x50 offset to get the bios balue. */
+ bios = ORC_RDWORD(port, 0x50);
+
+
+ shost = scsi_host_alloc(&inia100_template, sizeof(ORC_HCS));
+ if (!shost)
+ goto out_release_region;
+
+ pHCB = (ORC_HCS *)shost->hostdata;
+ pHCB->pdev = pdev;
+ pHCB->HCS_Base = port;
+ pHCB->HCS_BIOS = bios;
+ spin_lock_init(&pHCB->BitAllocFlagLock);
+
+ /* Get total memory needed for SCB */
+ sz = ORC_MAXQUEUE * sizeof(ORC_SCB);
+ pHCB->HCS_virScbArray = pci_alloc_consistent(pdev, sz,
+ &pHCB->HCS_physScbArray);
+ if (!pHCB->HCS_virScbArray) {
+ printk("inia100: SCB memory allocation error\n");
+ goto out_host_put;
+ }
+ memset(pHCB->HCS_virScbArray, 0, sz);
+
+ /* Get total memory needed for ESCB */
+ sz = ORC_MAXQUEUE * sizeof(ESCB);
+ pHCB->HCS_virEscbArray = pci_alloc_consistent(pdev, sz,
+ &pHCB->HCS_physEscbArray);
+ if (!pHCB->HCS_virEscbArray) {
+ printk("inia100: ESCB memory allocation error\n");
+ goto out_free_scb_array;
+ }
+ memset(pHCB->HCS_virEscbArray, 0, sz);
+
+ dBiosAdr = pHCB->HCS_BIOS;
+ dBiosAdr = (dBiosAdr << 4);
+ pbBiosAdr = phys_to_virt(dBiosAdr);
+ if (init_orchid(pHCB)) { /* Initialize orchid chip */
+ printk("inia100: initial orchid fail!!\n");
+ goto out_free_escb_array;
+ }
+
+ shost->io_port = pHCB->HCS_Base;
+ shost->n_io_port = 0xff;
+ shost->can_queue = ORC_MAXQUEUE;
+ shost->unique_id = shost->io_port;
+ shost->max_id = pHCB->HCS_MaxTar;
+ shost->max_lun = 16;
+ shost->irq = pHCB->HCS_Intr = pdev->irq;
+ shost->this_id = pHCB->HCS_SCSI_ID; /* Assign HCS index */
+ shost->sg_tablesize = TOTAL_SG_ENTRY;
+
+ /* Initial orc chip */
+ error = request_irq(pdev->irq, inia100_intr, SA_SHIRQ,
+ "inia100", shost);
+ if (error < 0) {
+ printk(KERN_WARNING "inia100: unable to get irq %d\n",
+ pdev->irq);
+ goto out_free_escb_array;
+ }
+
+ pci_set_drvdata(pdev, shost);
+
+ error = scsi_add_host(shost, &pdev->dev);
+ if (error)
+ goto out_free_irq;
+
+ scsi_scan_host(shost);
+ return 0;
+
+ out_free_irq:
+ free_irq(shost->irq, shost);
+ out_free_escb_array:
+ pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(ESCB),
+ pHCB->HCS_virEscbArray, pHCB->HCS_physEscbArray);
+ out_free_scb_array:
+ pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(ORC_SCB),
+ pHCB->HCS_virScbArray, pHCB->HCS_physScbArray);
+ out_host_put:
+ scsi_host_put(shost);
+ out_release_region:
+ release_region(port, 256);
+ out_disable_device:
+ pci_disable_device(pdev);
+ out:
+ return error;
+}
+
+static void __devexit inia100_remove_one(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ ORC_HCS *pHCB = (ORC_HCS *)shost->hostdata;
+
+ scsi_remove_host(shost);
+
+ free_irq(shost->irq, shost);
+ pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(ESCB),
+ pHCB->HCS_virEscbArray, pHCB->HCS_physEscbArray);
+ pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(ORC_SCB),
+ pHCB->HCS_virScbArray, pHCB->HCS_physScbArray);
+ release_region(shost->io_port, 256);
+
+ scsi_host_put(shost);
+}
+
+static struct pci_device_id inia100_pci_tbl[] = {
+ {PCI_VENDOR_ID_INIT, 0x1060, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {0,}
+};
+MODULE_DEVICE_TABLE(pci, inia100_pci_tbl);
+
+static struct pci_driver inia100_pci_driver = {
+ .name = "inia100",
+ .id_table = inia100_pci_tbl,
+ .probe = inia100_probe_one,
+ .remove = __devexit_p(inia100_remove_one),
+};
+
+static int __init inia100_init(void)
+{
+ return pci_module_init(&inia100_pci_driver);
+}
+
+static void __exit inia100_exit(void)
+{
+ pci_unregister_driver(&inia100_pci_driver);
+}
+
+MODULE_DESCRIPTION("Initio A100U2W SCSI driver");
+MODULE_AUTHOR("Initio Corporation");
+MODULE_LICENSE("Dual BSD/GPL");
+
+module_init(inia100_init);
+module_exit(inia100_exit);