diff options
Diffstat (limited to 'drivers/scsi/aacraid/rx.c')
| -rw-r--r-- | drivers/scsi/aacraid/rx.c | 47 |
1 files changed, 24 insertions, 23 deletions
diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c index 93ef7c37e568..e06ff83b69ce 100644 --- a/drivers/scsi/aacraid/rx.c +++ b/drivers/scsi/aacraid/rx.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Adaptec AAC series RAID controller driver * (c) Copyright 2001 Red Hat Inc. @@ -9,25 +10,10 @@ * 2010-2015 PMC-Sierra, Inc. (aacraid@pmc-sierra.com) * 2016-2017 Microsemi Corp. (aacraid@microsemi.com) * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * * Module Name: * rx.c * * Abstract: Hardware miniport for Drawbridge specific hardware functions. - * */ #include <linux/kernel.h> @@ -158,7 +144,16 @@ static void aac_rx_enable_interrupt_message(struct aac_dev *dev) * @dev: Adapter * @command: Command to execute * @p1: first parameter - * @ret: adapter status + * @p2: second parameter + * @p3: third parameter + * @p4: forth parameter + * @p5: fifth parameter + * @p6: sixth parameter + * @status: adapter status + * @r1: first return value + * @r2: second return value + * @r3: third return value + * @r4: forth return value * * This routine will send a synchronous command to the adapter and wait * for its completion. @@ -319,7 +314,7 @@ static void aac_rx_start_adapter(struct aac_dev *dev) union aac_init *init; init = dev->init; - init->r7.host_elapsed_seconds = cpu_to_le32(get_seconds()); + init->r7.host_elapsed_seconds = cpu_to_le32(ktime_get_real_seconds()); // We can only use a 32 bit address here rx_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL); @@ -457,6 +452,7 @@ static int aac_rx_deliver_message(struct fib * fib) /** * aac_rx_ioremap + * @dev: adapter * @size: mapping resize request * */ @@ -536,7 +532,7 @@ int aac_rx_select_comm(struct aac_dev *dev, int comm) } /** - * aac_rx_init - initialize an i960 based AAC card + * _aac_rx_init - initialize an i960 based AAC card * @dev: device to configure * * Allocate and set up resources for the i960 based AAC variants. The @@ -561,11 +557,16 @@ int _aac_rx_init(struct aac_dev *dev) dev->a_ops.adapter_sync_cmd = rx_sync_cmd; dev->a_ops.adapter_enable_int = aac_rx_disable_interrupt; dev->OIMR = status = rx_readb (dev, MUnit.OIMR); - if ((((status & 0x0c) != 0x0c) || aac_reset_devices || reset_devices) && - !aac_rx_restart_adapter(dev, 0, IOP_HWSOFT_RESET)) - /* Make sure the Hardware FIFO is empty */ - while ((++restart < 512) && - (rx_readl(dev, MUnit.OutboundQueue) != 0xFFFFFFFFL)); + + if (((status & 0x0c) != 0x0c) || dev->init_reset) { + dev->init_reset = false; + if (!aac_rx_restart_adapter(dev, 0, IOP_HWSOFT_RESET)) { + /* Make sure the Hardware FIFO is empty */ + while ((++restart < 512) && + (rx_readl(dev, MUnit.OutboundQueue) != 0xFFFFFFFFL)); + } + } + /* * Check to see if the board panic'd while booting. */ |