summaryrefslogtreecommitdiff
path: root/drivers/scsi/aacraid
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/aacraid')
-rw-r--r--drivers/scsi/aacraid/Makefile8
-rw-r--r--drivers/scsi/aacraid/README66
-rw-r--r--drivers/scsi/aacraid/TODO6
-rw-r--r--drivers/scsi/aacraid/aachba.c2037
-rw-r--r--drivers/scsi/aacraid/aacraid.h1623
-rw-r--r--drivers/scsi/aacraid/commctrl.c683
-rw-r--r--drivers/scsi/aacraid/comminit.c325
-rw-r--r--drivers/scsi/aacraid/commsup.c939
-rw-r--r--drivers/scsi/aacraid/dpcsup.c215
-rw-r--r--drivers/scsi/aacraid/linit.c749
-rw-r--r--drivers/scsi/aacraid/rkt.c440
-rw-r--r--drivers/scsi/aacraid/rx.c441
-rw-r--r--drivers/scsi/aacraid/sa.c374
13 files changed, 7906 insertions, 0 deletions
diff --git a/drivers/scsi/aacraid/Makefile b/drivers/scsi/aacraid/Makefile
new file mode 100644
index 000000000000..28d133a3094f
--- /dev/null
+++ b/drivers/scsi/aacraid/Makefile
@@ -0,0 +1,8 @@
+# Adaptec aacraid
+
+obj-$(CONFIG_SCSI_AACRAID) := aacraid.o
+
+aacraid-objs := linit.o aachba.o commctrl.o comminit.o commsup.o \
+ dpcsup.o rx.o sa.o rkt.o
+
+EXTRA_CFLAGS := -Idrivers/scsi
diff --git a/drivers/scsi/aacraid/README b/drivers/scsi/aacraid/README
new file mode 100644
index 000000000000..fdb0f45f7336
--- /dev/null
+++ b/drivers/scsi/aacraid/README
@@ -0,0 +1,66 @@
+AACRAID Driver for Linux (take two)
+
+Introduction
+-------------------------
+The aacraid driver adds support for Adaptec (http://www.adaptec.com)
+RAID controllers. This is a major rewrite from the original
+Adaptec supplied driver. It has signficantly cleaned up both the code
+and the running binary size (the module is less than half the size of
+the original).
+
+Supported Cards/Chipsets
+-------------------------
+ Adaptec 2020S
+ Adaptec 2025S
+ Adaptec 2120S
+ Adaptec 2200S
+ Adaptec 2230S
+ Adaptec 2240S
+ Adaptec 2410SA
+ Adaptec 2610SA
+ Adaptec 2810SA
+ Adaptec 21610SA
+ Adaptec 3230S
+ Adaptec 3240S
+ Adaptec 4000SAS
+ Adaptec 4005SAS
+ Adaptec 4800SAS
+ Adaptec 4805SAS
+ Adaptec 5400S
+ Dell PERC 2 Quad Channel
+ Dell PERC 2/Si
+ Dell PERC 3/Si
+ Dell PERC 3/Di
+ Dell CERC 2
+ HP NetRAID-4M
+ Legend S220
+ Legend S230
+
+People
+-------------------------
+Alan Cox <alan@redhat.com>
+Christoph Hellwig <hch@infradead.org> (updates for new-style PCI probing and SCSI host registration,
+ small cleanups/fixes)
+Matt Domsch <matt_domsch@dell.com> (revision ioctl, adapter messages)
+Deanna Bonds (non-DASD support, PAE fibs and 64 bit, added new adaptec controllers
+ added new ioctls, changed scsi interface to use new error handler,
+ increased the number of fibs and outstanding commands to a container)
+
+ (fixed 64bit and 64G memory model, changed confusing naming convention
+ where fibs that go to the hardware are consistently called hw_fibs and
+ not just fibs like the name of the driver tracking structure)
+Mark Salyzyn <Mark_Salyzyn@adaptec.com> Fixed panic issues and added some new product ids for upcoming hbas.
+
+Original Driver
+-------------------------
+Adaptec Unix OEM Product Group
+
+Mailing List
+-------------------------
+linux-scsi@vger.kernel.org (Interested parties troll here)
+Also note this is very different to Brian's original driver
+so don't expect him to support it.
+Adaptec does support this driver. Contact either tech support or Mark Salyzyn.
+
+Original by Brian Boerner February 2001
+Rewritten by Alan Cox, November 2001
diff --git a/drivers/scsi/aacraid/TODO b/drivers/scsi/aacraid/TODO
new file mode 100644
index 000000000000..25856a21d982
--- /dev/null
+++ b/drivers/scsi/aacraid/TODO
@@ -0,0 +1,6 @@
+o Testing
+o More testing
+o Feature request: display the firmware/bios/etc revisions in the
+ /proc info
+o Drop irq_mask, basically unused
+o I/O size increase
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
new file mode 100644
index 000000000000..f3fc35386060
--- /dev/null
+++ b/drivers/scsi/aacraid/aachba.c
@@ -0,0 +1,2037 @@
+/*
+ * Adaptec AAC series RAID controller driver
+ * (c) Copyright 2001 Red Hat Inc. <alan@redhat.com>
+ *
+ * based on the old aacraid driver that is..
+ * Adaptec aacraid device driver for Linux.
+ *
+ * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/completion.h>
+#include <linux/blkdev.h>
+#include <asm/semaphore.h>
+#include <asm/uaccess.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+
+#include "aacraid.h"
+
+/* values for inqd_pdt: Peripheral device type in plain English */
+#define INQD_PDT_DA 0x00 /* Direct-access (DISK) device */
+#define INQD_PDT_PROC 0x03 /* Processor device */
+#define INQD_PDT_CHNGR 0x08 /* Changer (jukebox, scsi2) */
+#define INQD_PDT_COMM 0x09 /* Communication device (scsi2) */
+#define INQD_PDT_NOLUN2 0x1f /* Unknown Device (scsi2) */
+#define INQD_PDT_NOLUN 0x7f /* Logical Unit Not Present */
+
+#define INQD_PDT_DMASK 0x1F /* Peripheral Device Type Mask */
+#define INQD_PDT_QMASK 0xE0 /* Peripheral Device Qualifer Mask */
+
+#define MAX_FIB_DATA (sizeof(struct hw_fib) - sizeof(FIB_HEADER))
+
+#define MAX_DRIVER_SG_SEGMENT_COUNT 17
+
+/*
+ * Sense codes
+ */
+
+#define SENCODE_NO_SENSE 0x00
+#define SENCODE_END_OF_DATA 0x00
+#define SENCODE_BECOMING_READY 0x04
+#define SENCODE_INIT_CMD_REQUIRED 0x04
+#define SENCODE_PARAM_LIST_LENGTH_ERROR 0x1A
+#define SENCODE_INVALID_COMMAND 0x20
+#define SENCODE_LBA_OUT_OF_RANGE 0x21
+#define SENCODE_INVALID_CDB_FIELD 0x24
+#define SENCODE_LUN_NOT_SUPPORTED 0x25
+#define SENCODE_INVALID_PARAM_FIELD 0x26
+#define SENCODE_PARAM_NOT_SUPPORTED 0x26
+#define SENCODE_PARAM_VALUE_INVALID 0x26
+#define SENCODE_RESET_OCCURRED 0x29
+#define SENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x3E
+#define SENCODE_INQUIRY_DATA_CHANGED 0x3F
+#define SENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x39
+#define SENCODE_DIAGNOSTIC_FAILURE 0x40
+#define SENCODE_INTERNAL_TARGET_FAILURE 0x44
+#define SENCODE_INVALID_MESSAGE_ERROR 0x49
+#define SENCODE_LUN_FAILED_SELF_CONFIG 0x4c
+#define SENCODE_OVERLAPPED_COMMAND 0x4E
+
+/*
+ * Additional sense codes
+ */
+
+#define ASENCODE_NO_SENSE 0x00
+#define ASENCODE_END_OF_DATA 0x05
+#define ASENCODE_BECOMING_READY 0x01
+#define ASENCODE_INIT_CMD_REQUIRED 0x02
+#define ASENCODE_PARAM_LIST_LENGTH_ERROR 0x00
+#define ASENCODE_INVALID_COMMAND 0x00
+#define ASENCODE_LBA_OUT_OF_RANGE 0x00
+#define ASENCODE_INVALID_CDB_FIELD 0x00
+#define ASENCODE_LUN_NOT_SUPPORTED 0x00
+#define ASENCODE_INVALID_PARAM_FIELD 0x00
+#define ASENCODE_PARAM_NOT_SUPPORTED 0x01
+#define ASENCODE_PARAM_VALUE_INVALID 0x02
+#define ASENCODE_RESET_OCCURRED 0x00
+#define ASENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x00
+#define ASENCODE_INQUIRY_DATA_CHANGED 0x03
+#define ASENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x00
+#define ASENCODE_DIAGNOSTIC_FAILURE 0x80
+#define ASENCODE_INTERNAL_TARGET_FAILURE 0x00
+#define ASENCODE_INVALID_MESSAGE_ERROR 0x00
+#define ASENCODE_LUN_FAILED_SELF_CONFIG 0x00
+#define ASENCODE_OVERLAPPED_COMMAND 0x00
+
+#define BYTE0(x) (unsigned char)(x)
+#define BYTE1(x) (unsigned char)((x) >> 8)
+#define BYTE2(x) (unsigned char)((x) >> 16)
+#define BYTE3(x) (unsigned char)((x) >> 24)
+
+/*------------------------------------------------------------------------------
+ * S T R U C T S / T Y P E D E F S
+ *----------------------------------------------------------------------------*/
+/* SCSI inquiry data */
+struct inquiry_data {
+ u8 inqd_pdt; /* Peripheral qualifier | Peripheral Device Type */
+ u8 inqd_dtq; /* RMB | Device Type Qualifier */
+ u8 inqd_ver; /* ISO version | ECMA version | ANSI-approved version */
+ u8 inqd_rdf; /* AENC | TrmIOP | Response data format */
+ u8 inqd_len; /* Additional length (n-4) */
+ u8 inqd_pad1[2];/* Reserved - must be zero */
+ u8 inqd_pad2; /* RelAdr | WBus32 | WBus16 | Sync | Linked |Reserved| CmdQue | SftRe */
+ u8 inqd_vid[8]; /* Vendor ID */
+ u8 inqd_pid[16];/* Product ID */
+ u8 inqd_prl[4]; /* Product Revision Level */
+};
+
+/*
+ * M O D U L E G L O B A L S
+ */
+
+static unsigned long aac_build_sg(struct scsi_cmnd* scsicmd, struct sgmap* sgmap);
+static unsigned long aac_build_sg64(struct scsi_cmnd* scsicmd, struct sgmap64* psg);
+static int aac_send_srb_fib(struct scsi_cmnd* scsicmd);
+#ifdef AAC_DETAILED_STATUS_INFO
+static char *aac_get_status_string(u32 status);
+#endif
+
+/*
+ * Non dasd selection is handled entirely in aachba now
+ */
+
+static int nondasd = -1;
+static int dacmode = -1;
+
+static int commit = -1;
+
+module_param(nondasd, int, 0);
+MODULE_PARM_DESC(nondasd, "Control scanning of hba for nondasd devices. 0=off, 1=on");
+module_param(dacmode, int, 0);
+MODULE_PARM_DESC(dacmode, "Control whether dma addressing is using 64 bit DAC. 0=off, 1=on");
+module_param(commit, int, 0);
+MODULE_PARM_DESC(commit, "Control whether a COMMIT_CONFIG is issued to the adapter for foreign arrays.\nThis is typically needed in systems that do not have a BIOS. 0=off, 1=on");
+
+/**
+ * aac_get_config_status - check the adapter configuration
+ * @common: adapter to query
+ *
+ * Query config status, and commit the configuration if needed.
+ */
+int aac_get_config_status(struct aac_dev *dev)
+{
+ int status = 0;
+ struct fib * fibptr;
+
+ if (!(fibptr = fib_alloc(dev)))
+ return -ENOMEM;
+
+ fib_init(fibptr);
+ {
+ struct aac_get_config_status *dinfo;
+ dinfo = (struct aac_get_config_status *) fib_data(fibptr);
+
+ dinfo->command = cpu_to_le32(VM_ContainerConfig);
+ dinfo->type = cpu_to_le32(CT_GET_CONFIG_STATUS);
+ dinfo->count = cpu_to_le32(sizeof(((struct aac_get_config_status_resp *)NULL)->data));
+ }
+
+ status = fib_send(ContainerCommand,
+ fibptr,
+ sizeof (struct aac_get_config_status),
+ FsaNormal,
+ 1, 1,
+ NULL, NULL);
+ if (status < 0 ) {
+ printk(KERN_WARNING "aac_get_config_status: SendFIB failed.\n");
+ } else {
+ struct aac_get_config_status_resp *reply
+ = (struct aac_get_config_status_resp *) fib_data(fibptr);
+ dprintk((KERN_WARNING
+ "aac_get_config_status: response=%d status=%d action=%d\n",
+ le32_to_cpu(reply->response),
+ le32_to_cpu(reply->status),
+ le32_to_cpu(reply->data.action)));
+ if ((le32_to_cpu(reply->response) != ST_OK) ||
+ (le32_to_cpu(reply->status) != CT_OK) ||
+ (le32_to_cpu(reply->data.action) > CFACT_PAUSE)) {
+ printk(KERN_WARNING "aac_get_config_status: Will not issue the Commit Configuration\n");
+ status = -EINVAL;
+ }
+ }
+ fib_complete(fibptr);
+ /* Send a CT_COMMIT_CONFIG to enable discovery of devices */
+ if (status >= 0) {
+ if (commit == 1) {
+ struct aac_commit_config * dinfo;
+ fib_init(fibptr);
+ dinfo = (struct aac_commit_config *) fib_data(fibptr);
+
+ dinfo->command = cpu_to_le32(VM_ContainerConfig);
+ dinfo->type = cpu_to_le32(CT_COMMIT_CONFIG);
+
+ status = fib_send(ContainerCommand,
+ fibptr,
+ sizeof (struct aac_commit_config),
+ FsaNormal,
+ 1, 1,
+ NULL, NULL);
+ fib_complete(fibptr);
+ } else if (commit == 0) {
+ printk(KERN_WARNING
+ "aac_get_config_status: Foreign device configurations are being ignored\n");
+ }
+ }
+ fib_free(fibptr);
+ return status;
+}
+
+/**
+ * aac_get_containers - list containers
+ * @common: adapter to probe
+ *
+ * Make a list of all containers on this controller
+ */
+int aac_get_containers(struct aac_dev *dev)
+{
+ struct fsa_dev_info *fsa_dev_ptr;
+ u32 index;
+ int status = 0;
+ struct fib * fibptr;
+ unsigned instance;
+ struct aac_get_container_count *dinfo;
+ struct aac_get_container_count_resp *dresp;
+ int maximum_num_containers = MAXIMUM_NUM_CONTAINERS;
+
+ instance = dev->scsi_host_ptr->unique_id;
+
+ if (!(fibptr = fib_alloc(dev)))
+ return -ENOMEM;
+
+ fib_init(fibptr);
+ dinfo = (struct aac_get_container_count *) fib_data(fibptr);
+ dinfo->command = cpu_to_le32(VM_ContainerConfig);
+ dinfo->type = cpu_to_le32(CT_GET_CONTAINER_COUNT);
+
+ status = fib_send(ContainerCommand,
+ fibptr,
+ sizeof (struct aac_get_container_count),
+ FsaNormal,
+ 1, 1,
+ NULL, NULL);
+ if (status >= 0) {
+ dresp = (struct aac_get_container_count_resp *)fib_data(fibptr);
+ maximum_num_containers = le32_to_cpu(dresp->ContainerSwitchEntries);
+ fib_complete(fibptr);
+ }
+
+ if (maximum_num_containers < MAXIMUM_NUM_CONTAINERS)
+ maximum_num_containers = MAXIMUM_NUM_CONTAINERS;
+
+ fsa_dev_ptr = (struct fsa_dev_info *) kmalloc(
+ sizeof(*fsa_dev_ptr) * maximum_num_containers, GFP_KERNEL);
+ if (!fsa_dev_ptr) {
+ fib_free(fibptr);
+ return -ENOMEM;
+ }
+ memset(fsa_dev_ptr, 0, sizeof(*fsa_dev_ptr) * maximum_num_containers);
+
+ dev->fsa_dev = fsa_dev_ptr;
+ dev->maximum_num_containers = maximum_num_containers;
+
+ for (index = 0; index < dev->maximum_num_containers; index++) {
+ struct aac_query_mount *dinfo;
+ struct aac_mount *dresp;
+
+ fsa_dev_ptr[index].devname[0] = '\0';
+
+ fib_init(fibptr);
+ dinfo = (struct aac_query_mount *) fib_data(fibptr);
+
+ dinfo->command = cpu_to_le32(VM_NameServe);
+ dinfo->count = cpu_to_le32(index);
+ dinfo->type = cpu_to_le32(FT_FILESYS);
+
+ status = fib_send(ContainerCommand,
+ fibptr,
+ sizeof (struct aac_query_mount),
+ FsaNormal,
+ 1, 1,
+ NULL, NULL);
+ if (status < 0 ) {
+ printk(KERN_WARNING "aac_get_containers: SendFIB failed.\n");
+ break;
+ }
+ dresp = (struct aac_mount *)fib_data(fibptr);
+
+ dprintk ((KERN_DEBUG
+ "VM_NameServe cid=%d status=%d vol=%d state=%d cap=%u\n",
+ (int)index, (int)le32_to_cpu(dresp->status),
+ (int)le32_to_cpu(dresp->mnt[0].vol),
+ (int)le32_to_cpu(dresp->mnt[0].state),
+ (unsigned)le32_to_cpu(dresp->mnt[0].capacity)));
+ if ((le32_to_cpu(dresp->status) == ST_OK) &&
+ (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) &&
+ (le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) {
+ fsa_dev_ptr[index].valid = 1;
+ fsa_dev_ptr[index].type = le32_to_cpu(dresp->mnt[0].vol);
+ fsa_dev_ptr[index].size = le32_to_cpu(dresp->mnt[0].capacity);
+ if (le32_to_cpu(dresp->mnt[0].state) & FSCS_READONLY)
+ fsa_dev_ptr[index].ro = 1;
+ }
+ fib_complete(fibptr);
+ /*
+ * If there are no more containers, then stop asking.
+ */
+ if ((index + 1) >= le32_to_cpu(dresp->count)){
+ break;
+ }
+ }
+ fib_free(fibptr);
+ return status;
+}
+
+static void aac_io_done(struct scsi_cmnd * scsicmd)
+{
+ unsigned long cpu_flags;
+ struct Scsi_Host *host = scsicmd->device->host;
+ spin_lock_irqsave(host->host_lock, cpu_flags);
+ scsicmd->scsi_done(scsicmd);
+ spin_unlock_irqrestore(host->host_lock, cpu_flags);
+}
+
+static void get_container_name_callback(void *context, struct fib * fibptr)
+{
+ struct aac_get_name_resp * get_name_reply;
+ struct scsi_cmnd * scsicmd;
+
+ scsicmd = (struct scsi_cmnd *) context;
+
+ dprintk((KERN_DEBUG "get_container_name_callback[cpu %d]: t = %ld.\n", smp_processor_id(), jiffies));
+ if (fibptr == NULL)
+ BUG();
+
+ get_name_reply = (struct aac_get_name_resp *) fib_data(fibptr);
+ /* Failure is irrelevant, using default value instead */
+ if ((le32_to_cpu(get_name_reply->status) == CT_OK)
+ && (get_name_reply->data[0] != '\0')) {
+ int count;
+ char * dp;
+ char * sp = get_name_reply->data;
+ sp[sizeof(((struct aac_get_name_resp *)NULL)->data)-1] = '\0';
+ while (*sp == ' ')
+ ++sp;
+ count = sizeof(((struct inquiry_data *)NULL)->inqd_pid);
+ dp = ((struct inquiry_data *)scsicmd->request_buffer)->inqd_pid;
+ if (*sp) do {
+ *dp++ = (*sp) ? *sp++ : ' ';
+ } while (--count > 0);
+ }
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+
+ fib_complete(fibptr);
+ fib_free(fibptr);
+ aac_io_done(scsicmd);
+}
+
+/**
+ * aac_get_container_name - get container name, none blocking.
+ */
+static int aac_get_container_name(struct scsi_cmnd * scsicmd, int cid)
+{
+ int status;
+ struct aac_get_name *dinfo;
+ struct fib * cmd_fibcontext;
+ struct aac_dev * dev;
+
+ dev = (struct aac_dev *)scsicmd->device->host->hostdata;
+
+ if (!(cmd_fibcontext = fib_alloc(dev)))
+ return -ENOMEM;
+
+ fib_init(cmd_fibcontext);
+ dinfo = (struct aac_get_name *) fib_data(cmd_fibcontext);
+
+ dinfo->command = cpu_to_le32(VM_ContainerConfig);
+ dinfo->type = cpu_to_le32(CT_READ_NAME);
+ dinfo->cid = cpu_to_le32(cid);
+ dinfo->count = cpu_to_le32(sizeof(((struct aac_get_name_resp *)NULL)->data));
+
+ status = fib_send(ContainerCommand,
+ cmd_fibcontext,
+ sizeof (struct aac_get_name),
+ FsaNormal,
+ 0, 1,
+ (fib_callback) get_container_name_callback,
+ (void *) scsicmd);
+
+ /*
+ * Check that the command queued to the controller
+ */
+ if (status == -EINPROGRESS)
+ return 0;
+
+ printk(KERN_WARNING "aac_get_container_name: fib_send failed with status: %d.\n", status);
+ fib_complete(cmd_fibcontext);
+ fib_free(cmd_fibcontext);
+ return -1;
+}
+
+/**
+ * probe_container - query a logical volume
+ * @dev: device to query
+ * @cid: container identifier
+ *
+ * Queries the controller about the given volume. The volume information
+ * is updated in the struct fsa_dev_info structure rather than returned.
+ */
+
+static int probe_container(struct aac_dev *dev, int cid)
+{
+ struct fsa_dev_info *fsa_dev_ptr;
+ int status;
+ struct aac_query_mount *dinfo;
+ struct aac_mount *dresp;
+ struct fib * fibptr;
+ unsigned instance;
+
+ fsa_dev_ptr = dev->fsa_dev;
+ instance = dev->scsi_host_ptr->unique_id;
+
+ if (!(fibptr = fib_alloc(dev)))
+ return -ENOMEM;
+
+ fib_init(fibptr);
+
+ dinfo = (struct aac_query_mount *)fib_data(fibptr);
+
+ dinfo->command = cpu_to_le32(VM_NameServe);
+ dinfo->count = cpu_to_le32(cid);
+ dinfo->type = cpu_to_le32(FT_FILESYS);
+
+ status = fib_send(ContainerCommand,
+ fibptr,
+ sizeof(struct aac_query_mount),
+ FsaNormal,
+ 1, 1,
+ NULL, NULL);
+ if (status < 0) {
+ printk(KERN_WARNING "aacraid: probe_containers query failed.\n");
+ goto error;
+ }
+
+ dresp = (struct aac_mount *) fib_data(fibptr);
+
+ if ((le32_to_cpu(dresp->status) == ST_OK) &&
+ (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) &&
+ (le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) {
+ fsa_dev_ptr[cid].valid = 1;
+ fsa_dev_ptr[cid].type = le32_to_cpu(dresp->mnt[0].vol);
+ fsa_dev_ptr[cid].size = le32_to_cpu(dresp->mnt[0].capacity);
+ if (le32_to_cpu(dresp->mnt[0].state) & FSCS_READONLY)
+ fsa_dev_ptr[cid].ro = 1;
+ }
+
+error:
+ fib_complete(fibptr);
+ fib_free(fibptr);
+
+ return status;
+}
+
+/* Local Structure to set SCSI inquiry data strings */
+struct scsi_inq {
+ char vid[8]; /* Vendor ID */
+ char pid[16]; /* Product ID */
+ char prl[4]; /* Product Revision Level */
+};
+
+/**
+ * InqStrCopy - string merge
+ * @a: string to copy from
+ * @b: string to copy to
+ *
+ * Copy a String from one location to another
+ * without copying \0
+ */
+
+static void inqstrcpy(char *a, char *b)
+{
+
+ while(*a != (char)0)
+ *b++ = *a++;
+}
+
+static char *container_types[] = {
+ "None",
+ "Volume",
+ "Mirror",
+ "Stripe",
+ "RAID5",
+ "SSRW",
+ "SSRO",
+ "Morph",
+ "Legacy",
+ "RAID4",
+ "RAID10",
+ "RAID00",
+ "V-MIRRORS",
+ "PSEUDO R4",
+ "RAID50",
+ "Unknown"
+};
+
+
+
+/* Function: setinqstr
+ *
+ * Arguments: [1] pointer to void [1] int
+ *
+ * Purpose: Sets SCSI inquiry data strings for vendor, product
+ * and revision level. Allows strings to be set in platform dependant
+ * files instead of in OS dependant driver source.
+ */
+
+static void setinqstr(int devtype, void *data, int tindex)
+{
+ struct scsi_inq *str;
+ struct aac_driver_ident *mp;
+
+ mp = aac_get_driver_ident(devtype);
+
+ str = (struct scsi_inq *)(data); /* cast data to scsi inq block */
+
+ inqstrcpy (mp->vname, str->vid);
+ inqstrcpy (mp->model, str->pid); /* last six chars reserved for vol type */
+
+ if (tindex < (sizeof(container_types)/sizeof(char *))){
+ char *findit = str->pid;
+
+ for ( ; *findit != ' '; findit++); /* walk till we find a space */
+ /* RAID is superfluous in the context of a RAID device */
+ if (memcmp(findit-4, "RAID", 4) == 0)
+ *(findit -= 4) = ' ';
+ inqstrcpy (container_types[tindex], findit + 1);
+ }
+ inqstrcpy ("V1.0", str->prl);
+}
+
+void set_sense(u8 *sense_buf, u8 sense_key, u8 sense_code,
+ u8 a_sense_code, u8 incorrect_length,
+ u8 bit_pointer, u16 field_pointer,
+ u32 residue)
+{
+ sense_buf[0] = 0xF0; /* Sense data valid, err code 70h (current error) */
+ sense_buf[1] = 0; /* Segment number, always zero */
+
+ if (incorrect_length) {
+ sense_buf[2] = sense_key | 0x20;/* Set ILI bit | sense key */
+ sense_buf[3] = BYTE3(residue);
+ sense_buf[4] = BYTE2(residue);
+ sense_buf[5] = BYTE1(residue);
+ sense_buf[6] = BYTE0(residue);
+ } else
+ sense_buf[2] = sense_key; /* Sense key */
+
+ if (sense_key == ILLEGAL_REQUEST)
+ sense_buf[7] = 10; /* Additional sense length */
+ else
+ sense_buf[7] = 6; /* Additional sense length */
+
+ sense_buf[12] = sense_code; /* Additional sense code */
+ sense_buf[13] = a_sense_code; /* Additional sense code qualifier */
+ if (sense_key == ILLEGAL_REQUEST) {
+ sense_buf[15] = 0;
+
+ if (sense_code == SENCODE_INVALID_PARAM_FIELD)
+ sense_buf[15] = 0x80;/* Std sense key specific field */
+ /* Illegal parameter is in the parameter block */
+
+ if (sense_code == SENCODE_INVALID_CDB_FIELD)
+ sense_buf[15] = 0xc0;/* Std sense key specific field */
+ /* Illegal parameter is in the CDB block */
+ sense_buf[15] |= bit_pointer;
+ sense_buf[16] = field_pointer >> 8; /* MSB */
+ sense_buf[17] = field_pointer; /* LSB */
+ }
+}
+
+int aac_get_adapter_info(struct aac_dev* dev)
+{
+ struct fib* fibptr;
+ struct aac_adapter_info* info;
+ int rcode;
+ u32 tmp;
+ if (!(fibptr = fib_alloc(dev)))
+ return -ENOMEM;
+
+ fib_init(fibptr);
+ info = (struct aac_adapter_info*) fib_data(fibptr);
+
+ memset(info,0,sizeof(struct aac_adapter_info));
+
+ rcode = fib_send(RequestAdapterInfo,
+ fibptr,
+ sizeof(struct aac_adapter_info),
+ FsaNormal,
+ 1, 1,
+ NULL,
+ NULL);
+
+ memcpy(&dev->adapter_info, info, sizeof(struct aac_adapter_info));
+
+ tmp = le32_to_cpu(dev->adapter_info.kernelrev);
+ printk(KERN_INFO "%s%d: kernel %d.%d-%d[%d]\n",
+ dev->name,
+ dev->id,
+ tmp>>24,
+ (tmp>>16)&0xff,
+ tmp&0xff,
+ le32_to_cpu(dev->adapter_info.kernelbuild));
+ tmp = le32_to_cpu(dev->adapter_info.monitorrev);
+ printk(KERN_INFO "%s%d: monitor %d.%d-%d[%d]\n",
+ dev->name, dev->id,
+ tmp>>24,(tmp>>16)&0xff,tmp&0xff,
+ le32_to_cpu(dev->adapter_info.monitorbuild));
+ tmp = le32_to_cpu(dev->adapter_info.biosrev);
+ printk(KERN_INFO "%s%d: bios %d.%d-%d[%d]\n",
+ dev->name, dev->id,
+ tmp>>24,(tmp>>16)&0xff,tmp&0xff,
+ le32_to_cpu(dev->adapter_info.biosbuild));
+ if (le32_to_cpu(dev->adapter_info.serial[0]) != 0xBAD0)
+ printk(KERN_INFO "%s%d: serial %x\n",
+ dev->name, dev->id,
+ le32_to_cpu(dev->adapter_info.serial[0]));
+
+ dev->nondasd_support = 0;
+ dev->raid_scsi_mode = 0;
+ if(dev->adapter_info.options & AAC_OPT_NONDASD){
+ dev->nondasd_support = 1;
+ }
+
+ /*
+ * If the firmware supports ROMB RAID/SCSI mode and we are currently
+ * in RAID/SCSI mode, set the flag. For now if in this mode we will
+ * force nondasd support on. If we decide to allow the non-dasd flag
+ * additional changes changes will have to be made to support
+ * RAID/SCSI. the function aac_scsi_cmd in this module will have to be
+ * changed to support the new dev->raid_scsi_mode flag instead of
+ * leaching off of the dev->nondasd_support flag. Also in linit.c the
+ * function aac_detect will have to be modified where it sets up the
+ * max number of channels based on the aac->nondasd_support flag only.
+ */
+ if ((dev->adapter_info.options & AAC_OPT_SCSI_MANAGED) &&
+ (dev->adapter_info.options & AAC_OPT_RAID_SCSI_MODE)) {
+ dev->nondasd_support = 1;
+ dev->raid_scsi_mode = 1;
+ }
+ if (dev->raid_scsi_mode != 0)
+ printk(KERN_INFO "%s%d: ROMB RAID/SCSI mode enabled\n",
+ dev->name, dev->id);
+
+ if(nondasd != -1) {
+ dev->nondasd_support = (nondasd!=0);
+ }
+ if(dev->nondasd_support != 0){
+ printk(KERN_INFO "%s%d: Non-DASD support enabled.\n",dev->name, dev->id);
+ }
+
+ dev->dac_support = 0;
+ if( (sizeof(dma_addr_t) > 4) && (dev->adapter_info.options & AAC_OPT_SGMAP_HOST64)){
+ printk(KERN_INFO "%s%d: 64bit support enabled.\n", dev->name, dev->id);
+ dev->dac_support = 1;
+ }
+
+ if(dacmode != -1) {
+ dev->dac_support = (dacmode!=0);
+ }
+ if(dev->dac_support != 0) {
+ if (!pci_set_dma_mask(dev->pdev, 0xFFFFFFFFFFFFFFFFULL) &&
+ !pci_set_consistent_dma_mask(dev->pdev, 0xFFFFFFFFFFFFFFFFULL)) {
+ printk(KERN_INFO"%s%d: 64 Bit DAC enabled\n",
+ dev->name, dev->id);
+ } else if (!pci_set_dma_mask(dev->pdev, 0xFFFFFFFFULL) &&
+ !pci_set_consistent_dma_mask(dev->pdev, 0xFFFFFFFFULL)) {
+ printk(KERN_INFO"%s%d: DMA mask set failed, 64 Bit DAC disabled\n",
+ dev->name, dev->id);
+ dev->dac_support = 0;
+ } else {
+ printk(KERN_WARNING"%s%d: No suitable DMA available.\n",
+ dev->name, dev->id);
+ rcode = -ENOMEM;
+ }
+ }
+
+ fib_complete(fibptr);
+ fib_free(fibptr);
+
+ return rcode;
+}
+
+
+static void read_callback(void *context, struct fib * fibptr)
+{
+ struct aac_dev *dev;
+ struct aac_read_reply *readreply;
+ struct scsi_cmnd *scsicmd;
+ u32 lba;
+ u32 cid;
+
+ scsicmd = (struct scsi_cmnd *) context;
+
+ dev = (struct aac_dev *)scsicmd->device->host->hostdata;
+ cid = ID_LUN_TO_CONTAINER(scsicmd->device->id, scsicmd->device->lun);
+
+ lba = ((scsicmd->cmnd[1] & 0x1F) << 16) | (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3];
+ dprintk((KERN_DEBUG "read_callback[cpu %d]: lba = %u, t = %ld.\n", smp_processor_id(), lba, jiffies));
+
+ if (fibptr == NULL)
+ BUG();
+
+ if(scsicmd->use_sg)
+ pci_unmap_sg(dev->pdev,
+ (struct scatterlist *)scsicmd->buffer,
+ scsicmd->use_sg,
+ scsicmd->sc_data_direction);
+ else if(scsicmd->request_bufflen)
+ pci_unmap_single(dev->pdev, scsicmd->SCp.dma_handle,
+ scsicmd->request_bufflen,
+ scsicmd->sc_data_direction);
+ readreply = (struct aac_read_reply *)fib_data(fibptr);
+ if (le32_to_cpu(readreply->status) == ST_OK)
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+ else {
+ printk(KERN_WARNING "read_callback: read failed, status = %d\n",
+ le32_to_cpu(readreply->status));
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
+ set_sense((u8 *) &dev->fsa_dev[cid].sense_data,
+ HARDWARE_ERROR,
+ SENCODE_INTERNAL_TARGET_FAILURE,
+ ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0,
+ 0, 0);
+ memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
+ (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(scsicmd->sense_buffer))
+ ? sizeof(scsicmd->sense_buffer)
+ : sizeof(dev->fsa_dev[cid].sense_data));
+ }
+ fib_complete(fibptr);
+ fib_free(fibptr);
+
+ aac_io_done(scsicmd);
+}
+
+static void write_callback(void *context, struct fib * fibptr)
+{
+ struct aac_dev *dev;
+ struct aac_write_reply *writereply;
+ struct scsi_cmnd *scsicmd;
+ u32 lba;
+ u32 cid;
+
+ scsicmd = (struct scsi_cmnd *) context;
+ dev = (struct aac_dev *)scsicmd->device->host->hostdata;
+ cid = ID_LUN_TO_CONTAINER(scsicmd->device->id, scsicmd->device->lun);
+
+ lba = ((scsicmd->cmnd[1] & 0x1F) << 16) | (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3];
+ dprintk((KERN_DEBUG "write_callback[cpu %d]: lba = %u, t = %ld.\n", smp_processor_id(), lba, jiffies));
+ if (fibptr == NULL)
+ BUG();
+
+ if(scsicmd->use_sg)
+ pci_unmap_sg(dev->pdev,
+ (struct scatterlist *)scsicmd->buffer,
+ scsicmd->use_sg,
+ scsicmd->sc_data_direction);
+ else if(scsicmd->request_bufflen)
+ pci_unmap_single(dev->pdev, scsicmd->SCp.dma_handle,
+ scsicmd->request_bufflen,
+ scsicmd->sc_data_direction);
+
+ writereply = (struct aac_write_reply *) fib_data(fibptr);
+ if (le32_to_cpu(writereply->status) == ST_OK)
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+ else {
+ printk(KERN_WARNING "write_callback: write failed, status = %d\n", writereply->status);
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
+ set_sense((u8 *) &dev->fsa_dev[cid].sense_data,
+ HARDWARE_ERROR,
+ SENCODE_INTERNAL_TARGET_FAILURE,
+ ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0,
+ 0, 0);
+ memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
+ sizeof(struct sense_data));
+ }
+
+ fib_complete(fibptr);
+ fib_free(fibptr);
+ aac_io_done(scsicmd);
+}
+
+int aac_read(struct scsi_cmnd * scsicmd, int cid)
+{
+ u32 lba;
+ u32 count;
+ int status;
+
+ u16 fibsize;
+ struct aac_dev *dev;
+ struct fib * cmd_fibcontext;
+
+ dev = (struct aac_dev *)scsicmd->device->host->hostdata;
+ /*
+ * Get block address and transfer length
+ */
+ if (scsicmd->cmnd[0] == READ_6) /* 6 byte command */
+ {
+ dprintk((KERN_DEBUG "aachba: received a read(6) command on id %d.\n", cid));
+
+ lba = ((scsicmd->cmnd[1] & 0x1F) << 16) | (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3];
+ count = scsicmd->cmnd[4];
+
+ if (count == 0)
+ count = 256;
+ } else {
+ dprintk((KERN_DEBUG "aachba: received a read(10) command on id %d.\n", cid));
+
+ lba = (scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
+ count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8];
+ }
+ dprintk((KERN_DEBUG "aac_read[cpu %d]: lba = %u, t = %ld.\n", smp_processor_id(), lba, jiffies));
+ /*
+ * Alocate and initialize a Fib
+ */
+ if (!(cmd_fibcontext = fib_alloc(dev))) {
+ return -1;
+ }
+
+ fib_init(cmd_fibcontext);
+
+ if(dev->dac_support == 1) {
+ struct aac_read64 *readcmd;
+ readcmd = (struct aac_read64 *) fib_data(cmd_fibcontext);
+ readcmd->command = cpu_to_le32(VM_CtHostRead64);
+ readcmd->cid = cpu_to_le16(cid);
+ readcmd->sector_count = cpu_to_le16(count);
+ readcmd->block = cpu_to_le32(lba);
+ readcmd->pad = 0;
+ readcmd->flags = 0;
+
+ aac_build_sg64(scsicmd, &readcmd->sg);
+ fibsize = sizeof(struct aac_read64) +
+ ((le32_to_cpu(readcmd->sg.count) - 1) *
+ sizeof (struct sgentry64));
+ BUG_ON (fibsize > (sizeof(struct hw_fib) -
+ sizeof(struct aac_fibhdr)));
+ /*
+ * Now send the Fib to the adapter
+ */
+ status = fib_send(ContainerCommand64,
+ cmd_fibcontext,
+ fibsize,
+ FsaNormal,
+ 0, 1,
+ (fib_callback) read_callback,
+ (void *) scsicmd);
+ } else {
+ struct aac_read *readcmd;
+ readcmd = (struct aac_read *) fib_data(cmd_fibcontext);
+ readcmd->command = cpu_to_le32(VM_CtBlockRead);
+ readcmd->cid = cpu_to_le32(cid);
+ readcmd->block = cpu_to_le32(lba);
+ readcmd->count = cpu_to_le32(count * 512);
+
+ if (count * 512 > (64 * 1024))
+ BUG();
+
+ aac_build_sg(scsicmd, &readcmd->sg);
+ fibsize = sizeof(struct aac_read) +
+ ((le32_to_cpu(readcmd->sg.count) - 1) *
+ sizeof (struct sgentry));
+ BUG_ON (fibsize > (sizeof(struct hw_fib) -
+ sizeof(struct aac_fibhdr)));
+ /*
+ * Now send the Fib to the adapter
+ */
+ status = fib_send(ContainerCommand,
+ cmd_fibcontext,
+ fibsize,
+ FsaNormal,
+ 0, 1,
+ (fib_callback) read_callback,
+ (void *) scsicmd);
+ }
+
+
+
+ /*
+ * Check that the command queued to the controller
+ */
+ if (status == -EINPROGRESS)
+ return 0;
+
+ printk(KERN_WARNING "aac_read: fib_send failed with status: %d.\n", status);
+ /*
+ * For some reason, the Fib didn't queue, return QUEUE_FULL
+ */
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_TASK_SET_FULL;
+ aac_io_done(scsicmd);
+ fib_complete(cmd_fibcontext);
+ fib_free(cmd_fibcontext);
+ return 0;
+}
+
+static int aac_write(struct scsi_cmnd * scsicmd, int cid)
+{
+ u32 lba;
+ u32 count;
+ int status;
+ u16 fibsize;
+ struct aac_dev *dev;
+ struct fib * cmd_fibcontext;
+
+ dev = (struct aac_dev *)scsicmd->device->host->hostdata;
+ /*
+ * Get block address and transfer length
+ */
+ if (scsicmd->cmnd[0] == WRITE_6) /* 6 byte command */
+ {
+ lba = ((scsicmd->cmnd[1] & 0x1F) << 16) | (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3];
+ count = scsicmd->cmnd[4];
+ if (count == 0)
+ count = 256;
+ } else {
+ dprintk((KERN_DEBUG "aachba: received a write(10) command on id %d.\n", cid));
+ lba = (scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
+ count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8];
+ }
+ dprintk((KERN_DEBUG "aac_write[cpu %d]: lba = %u, t = %ld.\n",
+ smp_processor_id(), (unsigned long long)lba, jiffies));
+ /*
+ * Allocate and initialize a Fib then setup a BlockWrite command
+ */
+ if (!(cmd_fibcontext = fib_alloc(dev))) {
+ scsicmd->result = DID_ERROR << 16;
+ aac_io_done(scsicmd);
+ return 0;
+ }
+ fib_init(cmd_fibcontext);
+
+ if(dev->dac_support == 1) {
+ struct aac_write64 *writecmd;
+ writecmd = (struct aac_write64 *) fib_data(cmd_fibcontext);
+ writecmd->command = cpu_to_le32(VM_CtHostWrite64);
+ writecmd->cid = cpu_to_le16(cid);
+ writecmd->sector_count = cpu_to_le16(count);
+ writecmd->block = cpu_to_le32(lba);
+ writecmd->pad = 0;
+ writecmd->flags = 0;
+
+ aac_build_sg64(scsicmd, &writecmd->sg);
+ fibsize = sizeof(struct aac_write64) +
+ ((le32_to_cpu(writecmd->sg.count) - 1) *
+ sizeof (struct sgentry64));
+ BUG_ON (fibsize > (sizeof(struct hw_fib) -
+ sizeof(struct aac_fibhdr)));
+ /*
+ * Now send the Fib to the adapter
+ */
+ status = fib_send(ContainerCommand64,
+ cmd_fibcontext,
+ fibsize,
+ FsaNormal,
+ 0, 1,
+ (fib_callback) write_callback,
+ (void *) scsicmd);
+ } else {
+ struct aac_write *writecmd;
+ writecmd = (struct aac_write *) fib_data(cmd_fibcontext);
+ writecmd->command = cpu_to_le32(VM_CtBlockWrite);
+ writecmd->cid = cpu_to_le32(cid);
+ writecmd->block = cpu_to_le32(lba);
+ writecmd->count = cpu_to_le32(count * 512);
+ writecmd->sg.count = cpu_to_le32(1);
+ /* ->stable is not used - it did mean which type of write */
+
+ if (count * 512 > (64 * 1024)) {
+ BUG();
+ }
+
+ aac_build_sg(scsicmd, &writecmd->sg);
+ fibsize = sizeof(struct aac_write) +
+ ((le32_to_cpu(writecmd->sg.count) - 1) *
+ sizeof (struct sgentry));
+ BUG_ON (fibsize > (sizeof(struct hw_fib) -
+ sizeof(struct aac_fibhdr)));
+ /*
+ * Now send the Fib to the adapter
+ */
+ status = fib_send(ContainerCommand,
+ cmd_fibcontext,
+ fibsize,
+ FsaNormal,
+ 0, 1,
+ (fib_callback) write_callback,
+ (void *) scsicmd);
+ }
+
+ /*
+ * Check that the command queued to the controller
+ */
+ if (status == -EINPROGRESS)
+ {
+ dprintk("write queued.\n");
+ return 0;
+ }
+
+ printk(KERN_WARNING "aac_write: fib_send failed with status: %d\n", status);
+ /*
+ * For some reason, the Fib didn't queue, return QUEUE_FULL
+ */
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_TASK_SET_FULL;
+ aac_io_done(scsicmd);
+
+ fib_complete(cmd_fibcontext);
+ fib_free(cmd_fibcontext);
+ return 0;
+}
+
+static void synchronize_callback(void *context, struct fib *fibptr)
+{
+ struct aac_synchronize_reply *synchronizereply;
+ struct scsi_cmnd *cmd;
+
+ cmd = context;
+
+ dprintk((KERN_DEBUG "synchronize_callback[cpu %d]: t = %ld.\n",
+ smp_processor_id(), jiffies));
+ BUG_ON(fibptr == NULL);
+
+
+ synchronizereply = fib_data(fibptr);
+ if (le32_to_cpu(synchronizereply->status) == CT_OK)
+ cmd->result = DID_OK << 16 |
+ COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+ else {
+ struct scsi_device *sdev = cmd->device;
+ struct aac_dev *dev = (struct aac_dev *)sdev->host->hostdata;
+ u32 cid = ID_LUN_TO_CONTAINER(sdev->id, sdev->lun);
+ printk(KERN_WARNING
+ "synchronize_callback: synchronize failed, status = %d\n",
+ le32_to_cpu(synchronizereply->status));
+ cmd->result = DID_OK << 16 |
+ COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
+ set_sense((u8 *)&dev->fsa_dev[cid].sense_data,
+ HARDWARE_ERROR,
+ SENCODE_INTERNAL_TARGET_FAILURE,
+ ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0,
+ 0, 0);
+ memcpy(cmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
+ min(sizeof(dev->fsa_dev[cid].sense_data),
+ sizeof(cmd->sense_buffer)));
+ }
+
+ fib_complete(fibptr);
+ fib_free(fibptr);
+ aac_io_done(cmd);
+}
+
+static int aac_synchronize(struct scsi_cmnd *scsicmd, int cid)
+{
+ int status;
+ struct fib *cmd_fibcontext;
+ struct aac_synchronize *synchronizecmd;
+ struct scsi_cmnd *cmd;
+ struct scsi_device *sdev = scsicmd->device;
+ int active = 0;
+ unsigned long flags;
+
+ /*
+ * Wait for all commands to complete to this specific
+ * target (block).
+ */
+ spin_lock_irqsave(&sdev->list_lock, flags);
+ list_for_each_entry(cmd, &sdev->cmd_list, list)
+ if (cmd != scsicmd && cmd->serial_number != 0) {
+ ++active;
+ break;
+ }
+
+ spin_unlock_irqrestore(&sdev->list_lock, flags);
+
+ /*
+ * Yield the processor (requeue for later)
+ */
+ if (active)
+ return SCSI_MLQUEUE_DEVICE_BUSY;
+
+ /*
+ * Alocate and initialize a Fib
+ */
+ if (!(cmd_fibcontext =
+ fib_alloc((struct aac_dev *)scsicmd->device->host->hostdata)))
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ fib_init(cmd_fibcontext);
+
+ synchronizecmd = fib_data(cmd_fibcontext);
+ synchronizecmd->command = cpu_to_le32(VM_ContainerConfig);
+ synchronizecmd->type = cpu_to_le32(CT_FLUSH_CACHE);
+ synchronizecmd->cid = cpu_to_le32(cid);
+ synchronizecmd->count =
+ cpu_to_le32(sizeof(((struct aac_synchronize_reply *)NULL)->data));
+
+ /*
+ * Now send the Fib to the adapter
+ */
+ status = fib_send(ContainerCommand,
+ cmd_fibcontext,
+ sizeof(struct aac_synchronize),
+ FsaNormal,
+ 0, 1,
+ (fib_callback)synchronize_callback,
+ (void *)scsicmd);
+
+ /*
+ * Check that the command queued to the controller
+ */
+ if (status == -EINPROGRESS)
+ return 0;
+
+ printk(KERN_WARNING
+ "aac_synchronize: fib_send failed with status: %d.\n", status);
+ fib_complete(cmd_fibcontext);
+ fib_free(cmd_fibcontext);
+ return SCSI_MLQUEUE_HOST_BUSY;
+}
+
+/**
+ * aac_scsi_cmd() - Process SCSI command
+ * @scsicmd: SCSI command block
+ *
+ * Emulate a SCSI command and queue the required request for the
+ * aacraid firmware.
+ */
+
+int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
+{
+ u32 cid = 0;
+ struct Scsi_Host *host = scsicmd->device->host;
+ struct aac_dev *dev = (struct aac_dev *)host->hostdata;
+ struct fsa_dev_info *fsa_dev_ptr = dev->fsa_dev;
+ int cardtype = dev->cardtype;
+ int ret;
+
+ /*
+ * If the bus, id or lun is out of range, return fail
+ * Test does not apply to ID 16, the pseudo id for the controller
+ * itself.
+ */
+ if (scsicmd->device->id != host->this_id) {
+ if ((scsicmd->device->channel == 0) ){
+ if( (scsicmd->device->id >= dev->maximum_num_containers) || (scsicmd->device->lun != 0)){
+ scsicmd->result = DID_NO_CONNECT << 16;
+ scsicmd->scsi_done(scsicmd);
+ return 0;
+ }
+ cid = ID_LUN_TO_CONTAINER(scsicmd->device->id, scsicmd->device->lun);
+
+ /*
+ * If the target container doesn't exist, it may have
+ * been newly created
+ */
+ if ((fsa_dev_ptr[cid].valid & 1) == 0) {
+ switch (scsicmd->cmnd[0]) {
+ case INQUIRY:
+ case READ_CAPACITY:
+ case TEST_UNIT_READY:
+ spin_unlock_irq(host->host_lock);
+ probe_container(dev, cid);
+ spin_lock_irq(host->host_lock);
+ if (fsa_dev_ptr[cid].valid == 0) {
+ scsicmd->result = DID_NO_CONNECT << 16;
+ scsicmd->scsi_done(scsicmd);
+ return 0;
+ }
+ default:
+ break;
+ }
+ }
+ /*
+ * If the target container still doesn't exist,
+ * return failure
+ */
+ if (fsa_dev_ptr[cid].valid == 0) {
+ scsicmd->result = DID_BAD_TARGET << 16;
+ scsicmd->scsi_done(scsicmd);
+ return 0;
+ }
+ } else { /* check for physical non-dasd devices */
+ if(dev->nondasd_support == 1){
+ return aac_send_srb_fib(scsicmd);
+ } else {
+ scsicmd->result = DID_NO_CONNECT << 16;
+ scsicmd->scsi_done(scsicmd);
+ return 0;
+ }
+ }
+ }
+ /*
+ * else Command for the controller itself
+ */
+ else if ((scsicmd->cmnd[0] != INQUIRY) && /* only INQUIRY & TUR cmnd supported for controller */
+ (scsicmd->cmnd[0] != TEST_UNIT_READY))
+ {
+ dprintk((KERN_WARNING "Only INQUIRY & TUR command supported for controller, rcvd = 0x%x.\n", scsicmd->cmnd[0]));
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
+ set_sense((u8 *) &dev->fsa_dev[cid].sense_data,
+ ILLEGAL_REQUEST,
+ SENCODE_INVALID_COMMAND,
+ ASENCODE_INVALID_COMMAND, 0, 0, 0, 0);
+ memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
+ (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(scsicmd->sense_buffer))
+ ? sizeof(scsicmd->sense_buffer)
+ : sizeof(dev->fsa_dev[cid].sense_data));
+ scsicmd->scsi_done(scsicmd);
+ return 0;
+ }
+
+
+ /* Handle commands here that don't really require going out to the adapter */
+ switch (scsicmd->cmnd[0]) {
+ case INQUIRY:
+ {
+ struct inquiry_data *inq_data_ptr;
+
+ dprintk((KERN_DEBUG "INQUIRY command, ID: %d.\n", scsicmd->device->id));
+ inq_data_ptr = (struct inquiry_data *)scsicmd->request_buffer;
+ memset(inq_data_ptr, 0, sizeof (struct inquiry_data));
+
+ inq_data_ptr->inqd_ver = 2; /* claim compliance to SCSI-2 */
+ inq_data_ptr->inqd_dtq = 0x80; /* set RMB bit to one indicating that the medium is removable */
+ inq_data_ptr->inqd_rdf = 2; /* A response data format value of two indicates that the data shall be in the format specified in SCSI-2 */
+ inq_data_ptr->inqd_len = 31;
+ /*Format for "pad2" is RelAdr | WBus32 | WBus16 | Sync | Linked |Reserved| CmdQue | SftRe */
+ inq_data_ptr->inqd_pad2= 0x32 ; /*WBus16|Sync|CmdQue */
+ /*
+ * Set the Vendor, Product, and Revision Level
+ * see: <vendor>.c i.e. aac.c
+ */
+ if (scsicmd->device->id == host->this_id) {
+ setinqstr(cardtype, (void *) (inq_data_ptr->inqd_vid), (sizeof(container_types)/sizeof(char *)));
+ inq_data_ptr->inqd_pdt = INQD_PDT_PROC; /* Processor device */
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+ scsicmd->scsi_done(scsicmd);
+ return 0;
+ }
+ setinqstr(cardtype, (void *) (inq_data_ptr->inqd_vid), fsa_dev_ptr[cid].type);
+ inq_data_ptr->inqd_pdt = INQD_PDT_DA; /* Direct/random access device */
+ return aac_get_container_name(scsicmd, cid);
+ }
+ case READ_CAPACITY:
+ {
+ u32 capacity;
+ char *cp;
+
+ dprintk((KERN_DEBUG "READ CAPACITY command.\n"));
+ if (fsa_dev_ptr[cid].size <= 0x100000000LL)
+ capacity = fsa_dev_ptr[cid].size - 1;
+ else
+ capacity = (u32)-1;
+ cp = scsicmd->request_buffer;
+ cp[0] = (capacity >> 24) & 0xff;
+ cp[1] = (capacity >> 16) & 0xff;
+ cp[2] = (capacity >> 8) & 0xff;
+ cp[3] = (capacity >> 0) & 0xff;
+ cp[4] = 0;
+ cp[5] = 0;
+ cp[6] = 2;
+ cp[7] = 0;
+
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+ scsicmd->scsi_done(scsicmd);
+
+ return 0;
+ }
+
+ case MODE_SENSE:
+ {
+ char *mode_buf;
+
+ dprintk((KERN_DEBUG "MODE SENSE command.\n"));
+ mode_buf = scsicmd->request_buffer;
+ mode_buf[0] = 3; /* Mode data length */
+ mode_buf[1] = 0; /* Medium type - default */
+ mode_buf[2] = 0; /* Device-specific param, bit 8: 0/1 = write enabled/protected */
+ mode_buf[3] = 0; /* Block descriptor length */
+
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+ scsicmd->scsi_done(scsicmd);
+
+ return 0;
+ }
+ case MODE_SENSE_10:
+ {
+ char *mode_buf;
+
+ dprintk((KERN_DEBUG "MODE SENSE 10 byte command.\n"));
+ mode_buf = scsicmd->request_buffer;
+ mode_buf[0] = 0; /* Mode data length (MSB) */
+ mode_buf[1] = 6; /* Mode data length (LSB) */
+ mode_buf[2] = 0; /* Medium type - default */
+ mode_buf[3] = 0; /* Device-specific param, bit 8: 0/1 = write enabled/protected */
+ mode_buf[4] = 0; /* reserved */
+ mode_buf[5] = 0; /* reserved */
+ mode_buf[6] = 0; /* Block descriptor length (MSB) */
+ mode_buf[7] = 0; /* Block descriptor length (LSB) */
+
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+ scsicmd->scsi_done(scsicmd);
+
+ return 0;
+ }
+ case REQUEST_SENSE:
+ dprintk((KERN_DEBUG "REQUEST SENSE command.\n"));
+ memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, sizeof (struct sense_data));
+ memset(&dev->fsa_dev[cid].sense_data, 0, sizeof (struct sense_data));
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+ scsicmd->scsi_done(scsicmd);
+ return 0;
+
+ case ALLOW_MEDIUM_REMOVAL:
+ dprintk((KERN_DEBUG "LOCK command.\n"));
+ if (scsicmd->cmnd[4])
+ fsa_dev_ptr[cid].locked = 1;
+ else
+ fsa_dev_ptr[cid].locked = 0;
+
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+ scsicmd->scsi_done(scsicmd);
+ return 0;
+ /*
+ * These commands are all No-Ops
+ */
+ case TEST_UNIT_READY:
+ case RESERVE:
+ case RELEASE:
+ case REZERO_UNIT:
+ case REASSIGN_BLOCKS:
+ case SEEK_10:
+ case START_STOP:
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+ scsicmd->scsi_done(scsicmd);
+ return 0;
+ }
+
+ switch (scsicmd->cmnd[0])
+ {
+ case READ_6:
+ case READ_10:
+ /*
+ * Hack to keep track of ordinal number of the device that
+ * corresponds to a container. Needed to convert
+ * containers to /dev/sd device names
+ */
+
+ spin_unlock_irq(host->host_lock);
+ if (scsicmd->request->rq_disk)
+ memcpy(fsa_dev_ptr[cid].devname,
+ scsicmd->request->rq_disk->disk_name,
+ 8);
+
+ ret = aac_read(scsicmd, cid);
+ spin_lock_irq(host->host_lock);
+ return ret;
+
+ case WRITE_6:
+ case WRITE_10:
+ spin_unlock_irq(host->host_lock);
+ ret = aac_write(scsicmd, cid);
+ spin_lock_irq(host->host_lock);
+ return ret;
+
+ case SYNCHRONIZE_CACHE:
+ /* Issue FIB to tell Firmware to flush it's cache */
+ return aac_synchronize(scsicmd, cid);
+
+ default:
+ /*
+ * Unhandled commands
+ */
+ printk(KERN_WARNING "Unhandled SCSI Command: 0x%x.\n", scsicmd->cmnd[0]);
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
+ set_sense((u8 *) &dev->fsa_dev[cid].sense_data,
+ ILLEGAL_REQUEST, SENCODE_INVALID_COMMAND,
+ ASENCODE_INVALID_COMMAND, 0, 0, 0, 0);
+ memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
+ (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(scsicmd->sense_buffer))
+ ? sizeof(scsicmd->sense_buffer)
+ : sizeof(dev->fsa_dev[cid].sense_data));
+ scsicmd->scsi_done(scsicmd);
+ return 0;
+ }
+}
+
+static int query_disk(struct aac_dev *dev, void __user *arg)
+{
+ struct aac_query_disk qd;
+ struct fsa_dev_info *fsa_dev_ptr;
+
+ fsa_dev_ptr = dev->fsa_dev;
+ if (copy_from_user(&qd, arg, sizeof (struct aac_query_disk)))
+ return -EFAULT;
+ if (qd.cnum == -1)
+ qd.cnum = ID_LUN_TO_CONTAINER(qd.id, qd.lun);
+ else if ((qd.bus == -1) && (qd.id == -1) && (qd.lun == -1))
+ {
+ if (qd.cnum < 0 || qd.cnum >= dev->maximum_num_containers)
+ return -EINVAL;
+ qd.instance = dev->scsi_host_ptr->host_no;
+ qd.bus = 0;
+ qd.id = CONTAINER_TO_ID(qd.cnum);
+ qd.lun = CONTAINER_TO_LUN(qd.cnum);
+ }
+ else return -EINVAL;
+
+ qd.valid = fsa_dev_ptr[qd.cnum].valid;
+ qd.locked = fsa_dev_ptr[qd.cnum].locked;
+ qd.deleted = fsa_dev_ptr[qd.cnum].deleted;
+
+ if (fsa_dev_ptr[qd.cnum].devname[0] == '\0')
+ qd.unmapped = 1;
+ else
+ qd.unmapped = 0;
+
+ strlcpy(qd.name, fsa_dev_ptr[qd.cnum].devname,
+ min(sizeof(qd.name), sizeof(fsa_dev_ptr[qd.cnum].devname) + 1));
+
+ if (copy_to_user(arg, &qd, sizeof (struct aac_query_disk)))
+ return -EFAULT;
+ return 0;
+}
+
+static int force_delete_disk(struct aac_dev *dev, void __user *arg)
+{
+ struct aac_delete_disk dd;
+ struct fsa_dev_info *fsa_dev_ptr;
+
+ fsa_dev_ptr = dev->fsa_dev;
+
+ if (copy_from_user(&dd, arg, sizeof (struct aac_delete_disk)))
+ return -EFAULT;
+
+ if (dd.cnum >= dev->maximum_num_containers)
+ return -EINVAL;
+ /*
+ * Mark this container as being deleted.
+ */
+ fsa_dev_ptr[dd.cnum].deleted = 1;
+ /*
+ * Mark the container as no longer valid
+ */
+ fsa_dev_ptr[dd.cnum].valid = 0;
+ return 0;
+}
+
+static int delete_disk(struct aac_dev *dev, void __user *arg)
+{
+ struct aac_delete_disk dd;
+ struct fsa_dev_info *fsa_dev_ptr;
+
+ fsa_dev_ptr = dev->fsa_dev;
+
+ if (copy_from_user(&dd, arg, sizeof (struct aac_delete_disk)))
+ return -EFAULT;
+
+ if (dd.cnum >= dev->maximum_num_containers)
+ return -EINVAL;
+ /*
+ * If the container is locked, it can not be deleted by the API.
+ */
+ if (fsa_dev_ptr[dd.cnum].locked)
+ return -EBUSY;
+ else {
+ /*
+ * Mark the container as no longer being valid.
+ */
+ fsa_dev_ptr[dd.cnum].valid = 0;
+ fsa_dev_ptr[dd.cnum].devname[0] = '\0';
+ return 0;
+ }
+}
+
+int aac_dev_ioctl(struct aac_dev *dev, int cmd, void __user *arg)
+{
+ switch (cmd) {
+ case FSACTL_QUERY_DISK:
+ return query_disk(dev, arg);
+ case FSACTL_DELETE_DISK:
+ return delete_disk(dev, arg);
+ case FSACTL_FORCE_DELETE_DISK:
+ return force_delete_disk(dev, arg);
+ case FSACTL_GET_CONTAINERS:
+ return aac_get_containers(dev);
+ default:
+ return -ENOTTY;
+ }
+}
+
+/**
+ *
+ * aac_srb_callback
+ * @context: the context set in the fib - here it is scsi cmd
+ * @fibptr: pointer to the fib
+ *
+ * Handles the completion of a scsi command to a non dasd device
+ *
+ */
+
+static void aac_srb_callback(void *context, struct fib * fibptr)
+{
+ struct aac_dev *dev;
+ struct aac_srb_reply *srbreply;
+ struct scsi_cmnd *scsicmd;
+
+ scsicmd = (struct scsi_cmnd *) context;
+ dev = (struct aac_dev *)scsicmd->device->host->hostdata;
+
+ if (fibptr == NULL)
+ BUG();
+
+ srbreply = (struct aac_srb_reply *) fib_data(fibptr);
+
+ scsicmd->sense_buffer[0] = '\0'; /* Initialize sense valid flag to false */
+ /*
+ * Calculate resid for sg
+ */
+
+ scsicmd->resid = scsicmd->request_bufflen -
+ le32_to_cpu(srbreply->data_xfer_length);
+
+ if(scsicmd->use_sg)
+ pci_unmap_sg(dev->pdev,
+ (struct scatterlist *)scsicmd->buffer,
+ scsicmd->use_sg,
+ scsicmd->sc_data_direction);
+ else if(scsicmd->request_bufflen)
+ pci_unmap_single(dev->pdev, scsicmd->SCp.dma_handle, scsicmd->request_bufflen,
+ scsicmd->sc_data_direction);
+
+ /*
+ * First check the fib status
+ */
+
+ if (le32_to_cpu(srbreply->status) != ST_OK){
+ int len;
+ printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status));
+ len = (le32_to_cpu(srbreply->sense_data_size) >
+ sizeof(scsicmd->sense_buffer)) ?
+ sizeof(scsicmd->sense_buffer) :
+ le32_to_cpu(srbreply->sense_data_size);
+ scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
+ memcpy(scsicmd->sense_buffer, srbreply->sense_data, len);
+ }
+
+ /*
+ * Next check the srb status
+ */
+ switch( (le32_to_cpu(srbreply->srb_status))&0x3f){
+ case SRB_STATUS_ERROR_RECOVERY:
+ case SRB_STATUS_PENDING:
+ case SRB_STATUS_SUCCESS:
+ if(scsicmd->cmnd[0] == INQUIRY ){
+ u8 b;
+ u8 b1;
+ /* We can't expose disk devices because we can't tell whether they
+ * are the raw container drives or stand alone drives. If they have
+ * the removable bit set then we should expose them though.
+ */
+ b = (*(u8*)scsicmd->buffer)&0x1f;
+ b1 = ((u8*)scsicmd->buffer)[1];
+ if( b==TYPE_TAPE || b==TYPE_WORM || b==TYPE_ROM || b==TYPE_MOD|| b==TYPE_MEDIUM_CHANGER
+ || (b==TYPE_DISK && (b1&0x80)) ){
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+ /*
+ * We will allow disk devices if in RAID/SCSI mode and
+ * the channel is 2
+ */
+ } else if ((dev->raid_scsi_mode) &&
+ (scsicmd->device->channel == 2)) {
+ scsicmd->result = DID_OK << 16 |
+ COMMAND_COMPLETE << 8;
+ } else {
+ scsicmd->result = DID_NO_CONNECT << 16 |
+ COMMAND_COMPLETE << 8;
+ }
+ } else {
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+ }
+ break;
+ case SRB_STATUS_DATA_OVERRUN:
+ switch(scsicmd->cmnd[0]){
+ case READ_6:
+ case WRITE_6:
+ case READ_10:
+ case WRITE_10:
+ case READ_12:
+ case WRITE_12:
+ if(le32_to_cpu(srbreply->data_xfer_length) < scsicmd->underflow ) {
+ printk(KERN_WARNING"aacraid: SCSI CMD underflow\n");
+ } else {
+ printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n");
+ }
+ scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8;
+ break;
+ case INQUIRY: {
+ u8 b;
+ u8 b1;
+ /* We can't expose disk devices because we can't tell whether they
+ * are the raw container drives or stand alone drives
+ */
+ b = (*(u8*)scsicmd->buffer)&0x0f;
+ b1 = ((u8*)scsicmd->buffer)[1];
+ if( b==TYPE_TAPE || b==TYPE_WORM || b==TYPE_ROM || b==TYPE_MOD|| b==TYPE_MEDIUM_CHANGER
+ || (b==TYPE_DISK && (b1&0x80)) ){
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+ /*
+ * We will allow disk devices if in RAID/SCSI mode and
+ * the channel is 2
+ */
+ } else if ((dev->raid_scsi_mode) &&
+ (scsicmd->device->channel == 2)) {
+ scsicmd->result = DID_OK << 16 |
+ COMMAND_COMPLETE << 8;
+ } else {
+ scsicmd->result = DID_NO_CONNECT << 16 |
+ COMMAND_COMPLETE << 8;
+ }
+ break;
+ }
+ default:
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+ break;
+ }
+ break;
+ case SRB_STATUS_ABORTED:
+ scsicmd->result = DID_ABORT << 16 | ABORT << 8;
+ break;
+ case SRB_STATUS_ABORT_FAILED:
+ // Not sure about this one - but assuming the hba was trying to abort for some reason
+ scsicmd->result = DID_ERROR << 16 | ABORT << 8;
+ break;
+ case SRB_STATUS_PARITY_ERROR:
+ scsicmd->result = DID_PARITY << 16 | MSG_PARITY_ERROR << 8;
+ break;
+ case SRB_STATUS_NO_DEVICE:
+ case SRB_STATUS_INVALID_PATH_ID:
+ case SRB_STATUS_INVALID_TARGET_ID:
+ case SRB_STATUS_INVALID_LUN:
+ case SRB_STATUS_SELECTION_TIMEOUT:
+ scsicmd->result = DID_NO_CONNECT << 16 | COMMAND_COMPLETE << 8;
+ break;
+
+ case SRB_STATUS_COMMAND_TIMEOUT:
+ case SRB_STATUS_TIMEOUT:
+ scsicmd->result = DID_TIME_OUT << 16 | COMMAND_COMPLETE << 8;
+ break;
+
+ case SRB_STATUS_BUSY:
+ scsicmd->result = DID_NO_CONNECT << 16 | COMMAND_COMPLETE << 8;
+ break;
+
+ case SRB_STATUS_BUS_RESET:
+ scsicmd->result = DID_RESET << 16 | COMMAND_COMPLETE << 8;
+ break;
+
+ case SRB_STATUS_MESSAGE_REJECTED:
+ scsicmd->result = DID_ERROR << 16 | MESSAGE_REJECT << 8;
+ break;
+ case SRB_STATUS_REQUEST_FLUSHED:
+ case SRB_STATUS_ERROR:
+ case SRB_STATUS_INVALID_REQUEST:
+ case SRB_STATUS_REQUEST_SENSE_FAILED:
+ case SRB_STATUS_NO_HBA:
+ case SRB_STATUS_UNEXPECTED_BUS_FREE:
+ case SRB_STATUS_PHASE_SEQUENCE_FAILURE:
+ case SRB_STATUS_BAD_SRB_BLOCK_LENGTH:
+ case SRB_STATUS_DELAYED_RETRY:
+ case SRB_STATUS_BAD_FUNCTION:
+ case SRB_STATUS_NOT_STARTED:
+ case SRB_STATUS_NOT_IN_USE:
+ case SRB_STATUS_FORCE_ABORT:
+ case SRB_STATUS_DOMAIN_VALIDATION_FAIL:
+ default:
+#ifdef AAC_DETAILED_STATUS_INFO
+ printk("aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n",
+ le32_to_cpu(srbreply->srb_status) & 0x3F,
+ aac_get_status_string(
+ le32_to_cpu(srbreply->srb_status) & 0x3F),
+ scsicmd->cmnd[0],
+ le32_to_cpu(srbreply->scsi_status));
+#endif
+ scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8;
+ break;
+ }
+ if (le32_to_cpu(srbreply->scsi_status) == 0x02 ){ // Check Condition
+ int len;
+ scsicmd->result |= SAM_STAT_CHECK_CONDITION;
+ len = (le32_to_cpu(srbreply->sense_data_size) >
+ sizeof(scsicmd->sense_buffer)) ?
+ sizeof(scsicmd->sense_buffer) :
+ le32_to_cpu(srbreply->sense_data_size);
+#ifdef AAC_DETAILED_STATUS_INFO
+ dprintk((KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n",
+ le32_to_cpu(srbreply->status), len));
+#endif
+ memcpy(scsicmd->sense_buffer, srbreply->sense_data, len);
+
+ }
+ /*
+ * OR in the scsi status (already shifted up a bit)
+ */
+ scsicmd->result |= le32_to_cpu(srbreply->scsi_status);
+
+ fib_complete(fibptr);
+ fib_free(fibptr);
+ aac_io_done(scsicmd);
+}
+
+/**
+ *
+ * aac_send_scb_fib
+ * @scsicmd: the scsi command block
+ *
+ * This routine will form a FIB and fill in the aac_srb from the
+ * scsicmd passed in.
+ */
+
+static int aac_send_srb_fib(struct scsi_cmnd* scsicmd)
+{
+ struct fib* cmd_fibcontext;
+ struct aac_dev* dev;
+ int status;
+ struct aac_srb *srbcmd;
+ u16 fibsize;
+ u32 flag;
+ u32 timeout;
+
+ if( scsicmd->device->id > 15 || scsicmd->device->lun > 7) {
+ scsicmd->result = DID_NO_CONNECT << 16;
+ scsicmd->scsi_done(scsicmd);
+ return 0;
+ }
+
+ dev = (struct aac_dev *)scsicmd->device->host->hostdata;
+ switch(scsicmd->sc_data_direction){
+ case DMA_TO_DEVICE:
+ flag = SRB_DataOut;
+ break;
+ case DMA_BIDIRECTIONAL:
+ flag = SRB_DataIn | SRB_DataOut;
+ break;
+ case DMA_FROM_DEVICE:
+ flag = SRB_DataIn;
+ break;
+ case DMA_NONE:
+ default: /* shuts up some versions of gcc */
+ flag = SRB_NoDataXfer;
+ break;
+ }
+
+
+ /*
+ * Allocate and initialize a Fib then setup a BlockWrite command
+ */
+ if (!(cmd_fibcontext = fib_alloc(dev))) {
+ return -1;
+ }
+ fib_init(cmd_fibcontext);
+
+ srbcmd = (struct aac_srb*) fib_data(cmd_fibcontext);
+ srbcmd->function = cpu_to_le32(SRBF_ExecuteScsi);
+ srbcmd->channel = cpu_to_le32(aac_logical_to_phys(scsicmd->device->channel));
+ srbcmd->id = cpu_to_le32(scsicmd->device->id);
+ srbcmd->lun = cpu_to_le32(scsicmd->device->lun);
+ srbcmd->flags = cpu_to_le32(flag);
+ timeout = (scsicmd->timeout-jiffies)/HZ;
+ if(timeout == 0){
+ timeout = 1;
+ }
+ srbcmd->timeout = cpu_to_le32(timeout); // timeout in seconds
+ srbcmd->retry_limit = 0; /* Obsolete parameter */
+ srbcmd->cdb_size = cpu_to_le32(scsicmd->cmd_len);
+
+ if( dev->dac_support == 1 ) {
+ aac_build_sg64(scsicmd, (struct sgmap64*) &srbcmd->sg);
+ srbcmd->count = cpu_to_le32(scsicmd->request_bufflen);
+
+ memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb));
+ memcpy(srbcmd->cdb, scsicmd->cmnd, scsicmd->cmd_len);
+ /*
+ * Build Scatter/Gather list
+ */
+ fibsize = sizeof (struct aac_srb) - sizeof (struct sgentry) +
+ ((le32_to_cpu(srbcmd->sg.count) & 0xff) *
+ sizeof (struct sgentry64));
+ BUG_ON (fibsize > (sizeof(struct hw_fib) -
+ sizeof(struct aac_fibhdr)));
+
+ /*
+ * Now send the Fib to the adapter
+ */
+ status = fib_send(ScsiPortCommand64, cmd_fibcontext,
+ fibsize, FsaNormal, 0, 1,
+ (fib_callback) aac_srb_callback,
+ (void *) scsicmd);
+ } else {
+ aac_build_sg(scsicmd, (struct sgmap*)&srbcmd->sg);
+ srbcmd->count = cpu_to_le32(scsicmd->request_bufflen);
+
+ memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb));
+ memcpy(srbcmd->cdb, scsicmd->cmnd, scsicmd->cmd_len);
+ /*
+ * Build Scatter/Gather list
+ */
+ fibsize = sizeof (struct aac_srb) +
+ (((le32_to_cpu(srbcmd->sg.count) & 0xff) - 1) *
+ sizeof (struct sgentry));
+ BUG_ON (fibsize > (sizeof(struct hw_fib) -
+ sizeof(struct aac_fibhdr)));
+
+ /*
+ * Now send the Fib to the adapter
+ */
+ status = fib_send(ScsiPortCommand, cmd_fibcontext, fibsize, FsaNormal, 0, 1,
+ (fib_callback) aac_srb_callback, (void *) scsicmd);
+ }
+ /*
+ * Check that the command queued to the controller
+ */
+ if (status == -EINPROGRESS){
+ return 0;
+ }
+
+ printk(KERN_WARNING "aac_srb: fib_send failed with status: %d\n", status);
+ fib_complete(cmd_fibcontext);
+ fib_free(cmd_fibcontext);
+
+ return -1;
+}
+
+static unsigned long aac_build_sg(struct scsi_cmnd* scsicmd, struct sgmap* psg)
+{
+ struct aac_dev *dev;
+ unsigned long byte_count = 0;
+
+ dev = (struct aac_dev *)scsicmd->device->host->hostdata;
+ // Get rid of old data
+ psg->count = 0;
+ psg->sg[0].addr = 0;
+ psg->sg[0].count = 0;
+ if (scsicmd->use_sg) {
+ struct scatterlist *sg;
+ int i;
+ int sg_count;
+ sg = (struct scatterlist *) scsicmd->request_buffer;
+
+ sg_count = pci_map_sg(dev->pdev, sg, scsicmd->use_sg,
+ scsicmd->sc_data_direction);
+ psg->count = cpu_to_le32(sg_count);
+
+ byte_count = 0;
+
+ for (i = 0; i < sg_count; i++) {
+ psg->sg[i].addr = cpu_to_le32(sg_dma_address(sg));
+ psg->sg[i].count = cpu_to_le32(sg_dma_len(sg));
+ byte_count += sg_dma_len(sg);
+ sg++;
+ }
+ /* hba wants the size to be exact */
+ if(byte_count > scsicmd->request_bufflen){
+ psg->sg[i-1].count -= (byte_count - scsicmd->request_bufflen);
+ byte_count = scsicmd->request_bufflen;
+ }
+ /* Check for command underflow */
+ if(scsicmd->underflow && (byte_count < scsicmd->underflow)){
+ printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
+ byte_count, scsicmd->underflow);
+ }
+ }
+ else if(scsicmd->request_bufflen) {
+ dma_addr_t addr;
+ addr = pci_map_single(dev->pdev,
+ scsicmd->request_buffer,
+ scsicmd->request_bufflen,
+ scsicmd->sc_data_direction);
+ psg->count = cpu_to_le32(1);
+ psg->sg[0].addr = cpu_to_le32(addr);
+ psg->sg[0].count = cpu_to_le32(scsicmd->request_bufflen);
+ scsicmd->SCp.dma_handle = addr;
+ byte_count = scsicmd->request_bufflen;
+ }
+ return byte_count;
+}
+
+
+static unsigned long aac_build_sg64(struct scsi_cmnd* scsicmd, struct sgmap64* psg)
+{
+ struct aac_dev *dev;
+ unsigned long byte_count = 0;
+ u64 le_addr;
+
+ dev = (struct aac_dev *)scsicmd->device->host->hostdata;
+ // Get rid of old data
+ psg->count = 0;
+ psg->sg[0].addr[0] = 0;
+ psg->sg[0].addr[1] = 0;
+ psg->sg[0].count = 0;
+ if (scsicmd->use_sg) {
+ struct scatterlist *sg;
+ int i;
+ int sg_count;
+ sg = (struct scatterlist *) scsicmd->request_buffer;
+
+ sg_count = pci_map_sg(dev->pdev, sg, scsicmd->use_sg,
+ scsicmd->sc_data_direction);
+ psg->count = cpu_to_le32(sg_count);
+
+ byte_count = 0;
+
+ for (i = 0; i < sg_count; i++) {
+ le_addr = cpu_to_le64(sg_dma_address(sg));
+ psg->sg[i].addr[1] = (u32)(le_addr>>32);
+ psg->sg[i].addr[0] = (u32)(le_addr & 0xffffffff);
+ psg->sg[i].count = cpu_to_le32(sg_dma_len(sg));
+ byte_count += sg_dma_len(sg);
+ sg++;
+ }
+ /* hba wants the size to be exact */
+ if(byte_count > scsicmd->request_bufflen){
+ psg->sg[i-1].count -= (byte_count - scsicmd->request_bufflen);
+ byte_count = scsicmd->request_bufflen;
+ }
+ /* Check for command underflow */
+ if(scsicmd->underflow && (byte_count < scsicmd->underflow)){
+ printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
+ byte_count, scsicmd->underflow);
+ }
+ }
+ else if(scsicmd->request_bufflen) {
+ dma_addr_t addr;
+ addr = pci_map_single(dev->pdev,
+ scsicmd->request_buffer,
+ scsicmd->request_bufflen,
+ scsicmd->sc_data_direction);
+ psg->count = cpu_to_le32(1);
+ le_addr = cpu_to_le64(addr);
+ psg->sg[0].addr[1] = (u32)(le_addr>>32);
+ psg->sg[0].addr[0] = (u32)(le_addr & 0xffffffff);
+ psg->sg[0].count = cpu_to_le32(scsicmd->request_bufflen);
+ scsicmd->SCp.dma_handle = addr;
+ byte_count = scsicmd->request_bufflen;
+ }
+ return byte_count;
+}
+
+#ifdef AAC_DETAILED_STATUS_INFO
+
+struct aac_srb_status_info {
+ u32 status;
+ char *str;
+};
+
+
+static struct aac_srb_status_info srb_status_info[] = {
+ { SRB_STATUS_PENDING, "Pending Status"},
+ { SRB_STATUS_SUCCESS, "Success"},
+ { SRB_STATUS_ABORTED, "Aborted Command"},
+ { SRB_STATUS_ABORT_FAILED, "Abort Failed"},
+ { SRB_STATUS_ERROR, "Error Event"},
+ { SRB_STATUS_BUSY, "Device Busy"},
+ { SRB_STATUS_INVALID_REQUEST, "Invalid Request"},
+ { SRB_STATUS_INVALID_PATH_ID, "Invalid Path ID"},
+ { SRB_STATUS_NO_DEVICE, "No Device"},
+ { SRB_STATUS_TIMEOUT, "Timeout"},
+ { SRB_STATUS_SELECTION_TIMEOUT, "Selection Timeout"},
+ { SRB_STATUS_COMMAND_TIMEOUT, "Command Timeout"},
+ { SRB_STATUS_MESSAGE_REJECTED, "Message Rejected"},
+ { SRB_STATUS_BUS_RESET, "Bus Reset"},
+ { SRB_STATUS_PARITY_ERROR, "Parity Error"},
+ { SRB_STATUS_REQUEST_SENSE_FAILED,"Request Sense Failed"},
+ { SRB_STATUS_NO_HBA, "No HBA"},
+ { SRB_STATUS_DATA_OVERRUN, "Data Overrun/Data Underrun"},
+ { SRB_STATUS_UNEXPECTED_BUS_FREE,"Unexpected Bus Free"},
+ { SRB_STATUS_PHASE_SEQUENCE_FAILURE,"Phase Error"},
+ { SRB_STATUS_BAD_SRB_BLOCK_LENGTH,"Bad Srb Block Length"},
+ { SRB_STATUS_REQUEST_FLUSHED, "Request Flushed"},
+ { SRB_STATUS_DELAYED_RETRY, "Delayed Retry"},
+ { SRB_STATUS_INVALID_LUN, "Invalid LUN"},
+ { SRB_STATUS_INVALID_TARGET_ID, "Invalid TARGET ID"},
+ { SRB_STATUS_BAD_FUNCTION, "Bad Function"},
+ { SRB_STATUS_ERROR_RECOVERY, "Error Recovery"},
+ { SRB_STATUS_NOT_STARTED, "Not Started"},
+ { SRB_STATUS_NOT_IN_USE, "Not In Use"},
+ { SRB_STATUS_FORCE_ABORT, "Force Abort"},
+ { SRB_STATUS_DOMAIN_VALIDATION_FAIL,"Domain Validation Failure"},
+ { 0xff, "Unknown Error"}
+};
+
+char *aac_get_status_string(u32 status)
+{
+ int i;
+
+ for(i=0; i < (sizeof(srb_status_info)/sizeof(struct aac_srb_status_info)); i++ ){
+ if(srb_status_info[i].status == status){
+ return srb_status_info[i].str;
+ }
+ }
+
+ return "Bad Status Code";
+}
+
+#endif
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
new file mode 100644
index 000000000000..700d90331c1c
--- /dev/null
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -0,0 +1,1623 @@
+#if (!defined(dprintk))
+# define dprintk(x)
+#endif
+
+/*------------------------------------------------------------------------------
+ * D E F I N E S
+ *----------------------------------------------------------------------------*/
+
+#define MAXIMUM_NUM_CONTAINERS 32
+
+#define AAC_NUM_FIB (256 + 64)
+#define AAC_NUM_IO_FIB 100
+
+#define AAC_MAX_LUN (8)
+
+#define AAC_MAX_HOSTPHYSMEMPAGES (0xfffff)
+
+/*
+ * These macros convert from physical channels to virtual channels
+ */
+#define CONTAINER_CHANNEL (0)
+#define ID_LUN_TO_CONTAINER(id, lun) (id)
+#define CONTAINER_TO_CHANNEL(cont) (CONTAINER_CHANNEL)
+#define CONTAINER_TO_ID(cont) (cont)
+#define CONTAINER_TO_LUN(cont) (0)
+
+#define aac_phys_to_logical(x) (x+1)
+#define aac_logical_to_phys(x) (x?x-1:0)
+
+/* #define AAC_DETAILED_STATUS_INFO */
+
+struct diskparm
+{
+ int heads;
+ int sectors;
+ int cylinders;
+};
+
+
+/*
+ * DON'T CHANGE THE ORDER, this is set by the firmware
+ */
+
+#define CT_NONE 0
+#define CT_VOLUME 1
+#define CT_MIRROR 2
+#define CT_STRIPE 3
+#define CT_RAID5 4
+#define CT_SSRW 5
+#define CT_SSRO 6
+#define CT_MORPH 7
+#define CT_PASSTHRU 8
+#define CT_RAID4 9
+#define CT_RAID10 10 /* stripe of mirror */
+#define CT_RAID00 11 /* stripe of stripe */
+#define CT_VOLUME_OF_MIRRORS 12 /* volume of mirror */
+#define CT_PSEUDO_RAID 13 /* really raid4 */
+#define CT_LAST_VOLUME_TYPE 14
+#define CT_OK 218
+
+/*
+ * Types of objects addressable in some fashion by the client.
+ * This is a superset of those objects handled just by the filesystem
+ * and includes "raw" objects that an administrator would use to
+ * configure containers and filesystems.
+ */
+
+#define FT_REG 1 /* regular file */
+#define FT_DIR 2 /* directory */
+#define FT_BLK 3 /* "block" device - reserved */
+#define FT_CHR 4 /* "character special" device - reserved */
+#define FT_LNK 5 /* symbolic link */
+#define FT_SOCK 6 /* socket */
+#define FT_FIFO 7 /* fifo */
+#define FT_FILESYS 8 /* ADAPTEC's "FSA"(tm) filesystem */
+#define FT_DRIVE 9 /* physical disk - addressable in scsi by bus/id/lun */
+#define FT_SLICE 10 /* virtual disk - raw volume - slice */
+#define FT_PARTITION 11 /* FSA partition - carved out of a slice - building block for containers */
+#define FT_VOLUME 12 /* Container - Volume Set */
+#define FT_STRIPE 13 /* Container - Stripe Set */
+#define FT_MIRROR 14 /* Container - Mirror Set */
+#define FT_RAID5 15 /* Container - Raid 5 Set */
+#define FT_DATABASE 16 /* Storage object with "foreign" content manager */
+
+/*
+ * Host side memory scatter gather list
+ * Used by the adapter for read, write, and readdirplus operations
+ * We have separate 32 and 64 bit version because even
+ * on 64 bit systems not all cards support the 64 bit version
+ */
+struct sgentry {
+ u32 addr; /* 32-bit address. */
+ u32 count; /* Length. */
+};
+
+struct sgentry64 {
+ u32 addr[2]; /* 64-bit addr. 2 pieces for data alignment */
+ u32 count; /* Length. */
+};
+
+/*
+ * SGMAP
+ *
+ * This is the SGMAP structure for all commands that use
+ * 32-bit addressing.
+ */
+
+struct sgmap {
+ u32 count;
+ struct sgentry sg[1];
+};
+
+struct sgmap64 {
+ u32 count;
+ struct sgentry64 sg[1];
+};
+
+struct creation_info
+{
+ u8 buildnum; /* e.g., 588 */
+ u8 usec; /* e.g., 588 */
+ u8 via; /* e.g., 1 = FSU,
+ * 2 = API
+ */
+ u8 year; /* e.g., 1997 = 97 */
+ u32 date; /*
+ * unsigned Month :4; // 1 - 12
+ * unsigned Day :6; // 1 - 32
+ * unsigned Hour :6; // 0 - 23
+ * unsigned Minute :6; // 0 - 60
+ * unsigned Second :6; // 0 - 60
+ */
+ u32 serial[2]; /* e.g., 0x1DEADB0BFAFAF001 */
+};
+
+
+/*
+ * Define all the constants needed for the communication interface
+ */
+
+/*
+ * Define how many queue entries each queue will have and the total
+ * number of entries for the entire communication interface. Also define
+ * how many queues we support.
+ *
+ * This has to match the controller
+ */
+
+#define NUMBER_OF_COMM_QUEUES 8 // 4 command; 4 response
+#define HOST_HIGH_CMD_ENTRIES 4
+#define HOST_NORM_CMD_ENTRIES 8
+#define ADAP_HIGH_CMD_ENTRIES 4
+#define ADAP_NORM_CMD_ENTRIES 512
+#define HOST_HIGH_RESP_ENTRIES 4
+#define HOST_NORM_RESP_ENTRIES 512
+#define ADAP_HIGH_RESP_ENTRIES 4
+#define ADAP_NORM_RESP_ENTRIES 8
+
+#define TOTAL_QUEUE_ENTRIES \
+ (HOST_NORM_CMD_ENTRIES + HOST_HIGH_CMD_ENTRIES + ADAP_NORM_CMD_ENTRIES + ADAP_HIGH_CMD_ENTRIES + \
+ HOST_NORM_RESP_ENTRIES + HOST_HIGH_RESP_ENTRIES + ADAP_NORM_RESP_ENTRIES + ADAP_HIGH_RESP_ENTRIES)
+
+
+/*
+ * Set the queues on a 16 byte alignment
+ */
+
+#define QUEUE_ALIGNMENT 16
+
+/*
+ * The queue headers define the Communication Region queues. These
+ * are physically contiguous and accessible by both the adapter and the
+ * host. Even though all queue headers are in the same contiguous block
+ * they will be represented as individual units in the data structures.
+ */
+
+struct aac_entry {
+ u32 size; /* Size in bytes of Fib which this QE points to */
+ u32 addr; /* Receiver address of the FIB */
+};
+
+/*
+ * The adapter assumes the ProducerIndex and ConsumerIndex are grouped
+ * adjacently and in that order.
+ */
+
+struct aac_qhdr {
+ u64 header_addr; /* Address to hand the adapter to access to this queue head */
+ u32 *producer; /* The producer index for this queue (host address) */
+ u32 *consumer; /* The consumer index for this queue (host address) */
+};
+
+/*
+ * Define all the events which the adapter would like to notify
+ * the host of.
+ */
+
+#define HostNormCmdQue 1 /* Change in host normal priority command queue */
+#define HostHighCmdQue 2 /* Change in host high priority command queue */
+#define HostNormRespQue 3 /* Change in host normal priority response queue */
+#define HostHighRespQue 4 /* Change in host high priority response queue */
+#define AdapNormRespNotFull 5
+#define AdapHighRespNotFull 6
+#define AdapNormCmdNotFull 7
+#define AdapHighCmdNotFull 8
+#define SynchCommandComplete 9
+#define AdapInternalError 0xfe /* The adapter detected an internal error shutting down */
+
+/*
+ * Define all the events the host wishes to notify the
+ * adapter of. The first four values much match the Qid the
+ * corresponding queue.
+ */
+
+#define AdapNormCmdQue 2
+#define AdapHighCmdQue 3
+#define AdapNormRespQue 6
+#define AdapHighRespQue 7
+#define HostShutdown 8
+#define HostPowerFail 9
+#define FatalCommError 10
+#define HostNormRespNotFull 11
+#define HostHighRespNotFull 12
+#define HostNormCmdNotFull 13
+#define HostHighCmdNotFull 14
+#define FastIo 15
+#define AdapPrintfDone 16
+
+/*
+ * Define all the queues that the adapter and host use to communicate
+ * Number them to match the physical queue layout.
+ */
+
+enum aac_queue_types {
+ HostNormCmdQueue = 0, /* Adapter to host normal priority command traffic */
+ HostHighCmdQueue, /* Adapter to host high priority command traffic */
+ AdapNormCmdQueue, /* Host to adapter normal priority command traffic */
+ AdapHighCmdQueue, /* Host to adapter high priority command traffic */
+ HostNormRespQueue, /* Adapter to host normal priority response traffic */
+ HostHighRespQueue, /* Adapter to host high priority response traffic */
+ AdapNormRespQueue, /* Host to adapter normal priority response traffic */
+ AdapHighRespQueue /* Host to adapter high priority response traffic */
+};
+
+/*
+ * Assign type values to the FSA communication data structures
+ */
+
+#define FIB_MAGIC 0x0001
+
+/*
+ * Define the priority levels the FSA communication routines support.
+ */
+
+#define FsaNormal 1
+#define FsaHigh 2
+
+/*
+ * Define the FIB. The FIB is the where all the requested data and
+ * command information are put to the application on the FSA adapter.
+ */
+
+struct aac_fibhdr {
+ u32 XferState; // Current transfer state for this CCB
+ u16 Command; // Routing information for the destination
+ u8 StructType; // Type FIB
+ u8 Flags; // Flags for FIB
+ u16 Size; // Size of this FIB in bytes
+ u16 SenderSize; // Size of the FIB in the sender (for response sizing)
+ u32 SenderFibAddress; // Host defined data in the FIB
+ u32 ReceiverFibAddress; // Logical address of this FIB for the adapter
+ u32 SenderData; // Place holder for the sender to store data
+ union {
+ struct {
+ u32 _ReceiverTimeStart; // Timestamp for receipt of fib
+ u32 _ReceiverTimeDone; // Timestamp for completion of fib
+ } _s;
+ } _u;
+};
+
+#define FIB_DATA_SIZE_IN_BYTES (512 - sizeof(struct aac_fibhdr))
+
+
+struct hw_fib {
+ struct aac_fibhdr header;
+ u8 data[FIB_DATA_SIZE_IN_BYTES]; // Command specific data
+};
+
+/*
+ * FIB commands
+ */
+
+#define TestCommandResponse 1
+#define TestAdapterCommand 2
+/*
+ * Lowlevel and comm commands
+ */
+#define LastTestCommand 100
+#define ReinitHostNormCommandQueue 101
+#define ReinitHostHighCommandQueue 102
+#define ReinitHostHighRespQueue 103
+#define ReinitHostNormRespQueue 104
+#define ReinitAdapNormCommandQueue 105
+#define ReinitAdapHighCommandQueue 107
+#define ReinitAdapHighRespQueue 108
+#define ReinitAdapNormRespQueue 109
+#define InterfaceShutdown 110
+#define DmaCommandFib 120
+#define StartProfile 121
+#define TermProfile 122
+#define SpeedTest 123
+#define TakeABreakPt 124
+#define RequestPerfData 125
+#define SetInterruptDefTimer 126
+#define SetInterruptDefCount 127
+#define GetInterruptDefStatus 128
+#define LastCommCommand 129
+/*
+ * Filesystem commands
+ */
+#define NuFileSystem 300
+#define UFS 301
+#define HostFileSystem 302
+#define LastFileSystemCommand 303
+/*
+ * Container Commands
+ */
+#define ContainerCommand 500
+#define ContainerCommand64 501
+/*
+ * Cluster Commands
+ */
+#define ClusterCommand 550
+/*
+ * Scsi Port commands (scsi passthrough)
+ */
+#define ScsiPortCommand 600
+#define ScsiPortCommand64 601
+/*
+ * Misc house keeping and generic adapter initiated commands
+ */
+#define AifRequest 700
+#define CheckRevision 701
+#define FsaHostShutdown 702
+#define RequestAdapterInfo 703
+#define IsAdapterPaused 704
+#define SendHostTime 705
+#define LastMiscCommand 706
+
+//
+// Commands that will target the failover level on the FSA adapter
+//
+
+enum fib_xfer_state {
+ HostOwned = (1<<0),
+ AdapterOwned = (1<<1),
+ FibInitialized = (1<<2),
+ FibEmpty = (1<<3),
+ AllocatedFromPool = (1<<4),
+ SentFromHost = (1<<5),
+ SentFromAdapter = (1<<6),
+ ResponseExpected = (1<<7),
+ NoResponseExpected = (1<<8),
+ AdapterProcessed = (1<<9),
+ HostProcessed = (1<<10),
+ HighPriority = (1<<11),
+ NormalPriority = (1<<12),
+ Async = (1<<13),
+ AsyncIo = (1<<13), // rpbfix: remove with new regime
+ PageFileIo = (1<<14), // rpbfix: remove with new regime
+ ShutdownRequest = (1<<15),
+ LazyWrite = (1<<16), // rpbfix: remove with new regime
+ AdapterMicroFib = (1<<17),
+ BIOSFibPath = (1<<18),
+ FastResponseCapable = (1<<19),
+ ApiFib = (1<<20) // Its an API Fib.
+};
+
+/*
+ * The following defines needs to be updated any time there is an
+ * incompatible change made to the aac_init structure.
+ */
+
+#define ADAPTER_INIT_STRUCT_REVISION 3
+
+struct aac_init
+{
+ u32 InitStructRevision;
+ u32 MiniPortRevision;
+ u32 fsrev;
+ u32 CommHeaderAddress;
+ u32 FastIoCommAreaAddress;
+ u32 AdapterFibsPhysicalAddress;
+ u32 AdapterFibsVirtualAddress;
+ u32 AdapterFibsSize;
+ u32 AdapterFibAlign;
+ u32 printfbuf;
+ u32 printfbufsiz;
+ u32 HostPhysMemPages; // number of 4k pages of host physical memory
+ u32 HostElapsedSeconds; // number of seconds since 1970.
+};
+
+enum aac_log_level {
+ LOG_AAC_INIT = 10,
+ LOG_AAC_INFORMATIONAL = 20,
+ LOG_AAC_WARNING = 30,
+ LOG_AAC_LOW_ERROR = 40,
+ LOG_AAC_MEDIUM_ERROR = 50,
+ LOG_AAC_HIGH_ERROR = 60,
+ LOG_AAC_PANIC = 70,
+ LOG_AAC_DEBUG = 80,
+ LOG_AAC_WINDBG_PRINT = 90
+};
+
+#define FSAFS_NTC_GET_ADAPTER_FIB_CONTEXT 0x030b
+#define FSAFS_NTC_FIB_CONTEXT 0x030c
+
+struct aac_dev;
+
+struct adapter_ops
+{
+ void (*adapter_interrupt)(struct aac_dev *dev);
+ void (*adapter_notify)(struct aac_dev *dev, u32 event);
+ int (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 *status);
+ int (*adapter_check_health)(struct aac_dev *dev);
+};
+
+/*
+ * Define which interrupt handler needs to be installed
+ */
+
+struct aac_driver_ident
+{
+ int (*init)(struct aac_dev *dev);
+ char * name;
+ char * vname;
+ char * model;
+ u16 channels;
+ int quirks;
+};
+/*
+ * Some adapter firmware needs communication memory
+ * below 2gig. This tells the init function to set the
+ * dma mask such that fib memory will be allocated where the
+ * adapter firmware can get to it.
+ */
+#define AAC_QUIRK_31BIT 0x0001
+
+/*
+ * Some adapter firmware, when the raid card's cache is turned off, can not
+ * split up scatter gathers in order to deal with the limits of the
+ * underlying CHIM. This limit is 34 scatter gather elements.
+ */
+#define AAC_QUIRK_34SG 0x0002
+
+/*
+ * This adapter is a slave (no Firmware)
+ */
+#define AAC_QUIRK_SLAVE 0x0004
+
+/*
+ * This adapter is a master.
+ */
+#define AAC_QUIRK_MASTER 0x0008
+
+/*
+ * The adapter interface specs all queues to be located in the same
+ * physically contigous block. The host structure that defines the
+ * commuication queues will assume they are each a separate physically
+ * contigous memory region that will support them all being one big
+ * contigous block.
+ * There is a command and response queue for each level and direction of
+ * commuication. These regions are accessed by both the host and adapter.
+ */
+
+struct aac_queue {
+ u64 logical; /*address we give the adapter */
+ struct aac_entry *base; /*system virtual address */
+ struct aac_qhdr headers; /*producer,consumer q headers*/
+ u32 entries; /*Number of queue entries */
+ wait_queue_head_t qfull; /*Event to wait on if q full */
+ wait_queue_head_t cmdready; /*Cmd ready from the adapter */
+ /* This is only valid for adapter to host command queues. */
+ spinlock_t *lock; /* Spinlock for this queue must take this lock before accessing the lock */
+ spinlock_t lockdata; /* Actual lock (used only on one side of the lock) */
+ unsigned long SavedIrql; /* Previous IRQL when the spin lock is taken */
+ u32 padding; /* Padding - FIXME - can remove I believe */
+ struct list_head cmdq; /* A queue of FIBs which need to be prcessed by the FS thread. This is */
+ /* only valid for command queues which receive entries from the adapter. */
+ struct list_head pendingq; /* A queue of outstanding fib's to the adapter. */
+ u32 numpending; /* Number of entries on outstanding queue. */
+ struct aac_dev * dev; /* Back pointer to adapter structure */
+};
+
+/*
+ * Message queues. The order here is important, see also the
+ * queue type ordering
+ */
+
+struct aac_queue_block
+{
+ struct aac_queue queue[8];
+};
+
+/*
+ * SaP1 Message Unit Registers
+ */
+
+struct sa_drawbridge_CSR {
+ /* Offset | Name */
+ __le32 reserved[10]; /* 00h-27h | Reserved */
+ u8 LUT_Offset; /* 28h | Lookup Table Offset */
+ u8 reserved1[3]; /* 29h-2bh | Reserved */
+ __le32 LUT_Data; /* 2ch | Looup Table Data */
+ __le32 reserved2[26]; /* 30h-97h | Reserved */
+ __le16 PRICLEARIRQ; /* 98h | Primary Clear Irq */
+ __le16 SECCLEARIRQ; /* 9ah | Secondary Clear Irq */
+ __le16 PRISETIRQ; /* 9ch | Primary Set Irq */
+ __le16 SECSETIRQ; /* 9eh | Secondary Set Irq */
+ __le16 PRICLEARIRQMASK;/* a0h | Primary Clear Irq Mask */
+ __le16 SECCLEARIRQMASK;/* a2h | Secondary Clear Irq Mask */
+ __le16 PRISETIRQMASK; /* a4h | Primary Set Irq Mask */
+ __le16 SECSETIRQMASK; /* a6h | Secondary Set Irq Mask */
+ __le32 MAILBOX0; /* a8h | Scratchpad 0 */
+ __le32 MAILBOX1; /* ach | Scratchpad 1 */
+ __le32 MAILBOX2; /* b0h | Scratchpad 2 */
+ __le32 MAILBOX3; /* b4h | Scratchpad 3 */
+ __le32 MAILBOX4; /* b8h | Scratchpad 4 */
+ __le32 MAILBOX5; /* bch | Scratchpad 5 */
+ __le32 MAILBOX6; /* c0h | Scratchpad 6 */
+ __le32 MAILBOX7; /* c4h | Scratchpad 7 */
+ __le32 ROM_Setup_Data; /* c8h | Rom Setup and Data */
+ __le32 ROM_Control_Addr;/* cch | Rom Control and Address */
+ __le32 reserved3[12]; /* d0h-ffh | reserved */
+ __le32 LUT[64]; /* 100h-1ffh | Lookup Table Entries */
+};
+
+#define Mailbox0 SaDbCSR.MAILBOX0
+#define Mailbox1 SaDbCSR.MAILBOX1
+#define Mailbox2 SaDbCSR.MAILBOX2
+#define Mailbox3 SaDbCSR.MAILBOX3
+#define Mailbox4 SaDbCSR.MAILBOX4
+#define Mailbox5 SaDbCSR.MAILBOX5
+#define Mailbox7 SaDbCSR.MAILBOX7
+
+#define DoorbellReg_p SaDbCSR.PRISETIRQ
+#define DoorbellReg_s SaDbCSR.SECSETIRQ
+#define DoorbellClrReg_p SaDbCSR.PRICLEARIRQ
+
+
+#define DOORBELL_0 0x0001
+#define DOORBELL_1 0x0002
+#define DOORBELL_2 0x0004
+#define DOORBELL_3 0x0008
+#define DOORBELL_4 0x0010
+#define DOORBELL_5 0x0020
+#define DOORBELL_6 0x0040
+
+
+#define PrintfReady DOORBELL_5
+#define PrintfDone DOORBELL_5
+
+struct sa_registers {
+ struct sa_drawbridge_CSR SaDbCSR; /* 98h - c4h */
+};
+
+
+#define Sa_MINIPORT_REVISION 1
+
+#define sa_readw(AEP, CSR) readl(&((AEP)->regs.sa->CSR))
+#define sa_readl(AEP, CSR) readl(&((AEP)->regs.sa->CSR))
+#define sa_writew(AEP, CSR, value) writew(value, &((AEP)->regs.sa->CSR))
+#define sa_writel(AEP, CSR, value) writel(value, &((AEP)->regs.sa->CSR))
+
+/*
+ * Rx Message Unit Registers
+ */
+
+struct rx_mu_registers {
+ /* Local | PCI*| Name */
+ __le32 ARSR; /* 1300h | 00h | APIC Register Select Register */
+ __le32 reserved0; /* 1304h | 04h | Reserved */
+ __le32 AWR; /* 1308h | 08h | APIC Window Register */
+ __le32 reserved1; /* 130Ch | 0Ch | Reserved */
+ __le32 IMRx[2]; /* 1310h | 10h | Inbound Message Registers */
+ __le32 OMRx[2]; /* 1318h | 18h | Outbound Message Registers */
+ __le32 IDR; /* 1320h | 20h | Inbound Doorbell Register */
+ __le32 IISR; /* 1324h | 24h | Inbound Interrupt
+ Status Register */
+ __le32 IIMR; /* 1328h | 28h | Inbound Interrupt
+ Mask Register */
+ __le32 ODR; /* 132Ch | 2Ch | Outbound Doorbell Register */
+ __le32 OISR; /* 1330h | 30h | Outbound Interrupt
+ Status Register */
+ __le32 OIMR; /* 1334h | 34h | Outbound Interrupt
+ Mask Register */
+ /* * Must access through ATU Inbound
+ Translation Window */
+};
+
+struct rx_inbound {
+ __le32 Mailbox[8];
+};
+
+#define InboundMailbox0 IndexRegs.Mailbox[0]
+#define InboundMailbox1 IndexRegs.Mailbox[1]
+#define InboundMailbox2 IndexRegs.Mailbox[2]
+#define InboundMailbox3 IndexRegs.Mailbox[3]
+#define InboundMailbox4 IndexRegs.Mailbox[4]
+#define InboundMailbox5 IndexRegs.Mailbox[5]
+#define InboundMailbox6 IndexRegs.Mailbox[6]
+
+#define INBOUNDDOORBELL_0 0x00000001
+#define INBOUNDDOORBELL_1 0x00000002
+#define INBOUNDDOORBELL_2 0x00000004
+#define INBOUNDDOORBELL_3 0x00000008
+#define INBOUNDDOORBELL_4 0x00000010
+#define INBOUNDDOORBELL_5 0x00000020
+#define INBOUNDDOORBELL_6 0x00000040
+
+#define OUTBOUNDDOORBELL_0 0x00000001
+#define OUTBOUNDDOORBELL_1 0x00000002
+#define OUTBOUNDDOORBELL_2 0x00000004
+#define OUTBOUNDDOORBELL_3 0x00000008
+#define OUTBOUNDDOORBELL_4 0x00000010
+
+#define InboundDoorbellReg MUnit.IDR
+#define OutboundDoorbellReg MUnit.ODR
+
+struct rx_registers {
+ struct rx_mu_registers MUnit; /* 1300h - 1334h */
+ __le32 reserved1[6]; /* 1338h - 134ch */
+ struct rx_inbound IndexRegs;
+};
+
+#define rx_readb(AEP, CSR) readb(&((AEP)->regs.rx->CSR))
+#define rx_readl(AEP, CSR) readl(&((AEP)->regs.rx->CSR))
+#define rx_writeb(AEP, CSR, value) writeb(value, &((AEP)->regs.rx->CSR))
+#define rx_writel(AEP, CSR, value) writel(value, &((AEP)->regs.rx->CSR))
+
+/*
+ * Rkt Message Unit Registers (same as Rx, except a larger reserve region)
+ */
+
+#define rkt_mu_registers rx_mu_registers
+#define rkt_inbound rx_inbound
+
+struct rkt_registers {
+ struct rkt_mu_registers MUnit; /* 1300h - 1334h */
+ __le32 reserved1[1010]; /* 1338h - 22fch */
+ struct rkt_inbound IndexRegs; /* 2300h - */
+};
+
+#define rkt_readb(AEP, CSR) readb(&((AEP)->regs.rkt->CSR))
+#define rkt_readl(AEP, CSR) readl(&((AEP)->regs.rkt->CSR))
+#define rkt_writeb(AEP, CSR, value) writeb(value, &((AEP)->regs.rkt->CSR))
+#define rkt_writel(AEP, CSR, value) writel(value, &((AEP)->regs.rkt->CSR))
+
+struct fib;
+
+typedef void (*fib_callback)(void *ctxt, struct fib *fibctx);
+
+struct aac_fib_context {
+ s16 type; // used for verification of structure
+ s16 size;
+ u32 unique; // unique value representing this context
+ ulong jiffies; // used for cleanup - dmb changed to ulong
+ struct list_head next; // used to link context's into a linked list
+ struct semaphore wait_sem; // this is used to wait for the next fib to arrive.
+ int wait; // Set to true when thread is in WaitForSingleObject
+ unsigned long count; // total number of FIBs on FibList
+ struct list_head fib_list; // this holds fibs and their attachd hw_fibs
+};
+
+struct sense_data {
+ u8 error_code; /* 70h (current errors), 71h(deferred errors) */
+ u8 valid:1; /* A valid bit of one indicates that the information */
+ /* field contains valid information as defined in the
+ * SCSI-2 Standard.
+ */
+ u8 segment_number; /* Only used for COPY, COMPARE, or COPY AND VERIFY Commands */
+ u8 sense_key:4; /* Sense Key */
+ u8 reserved:1;
+ u8 ILI:1; /* Incorrect Length Indicator */
+ u8 EOM:1; /* End Of Medium - reserved for random access devices */
+ u8 filemark:1; /* Filemark - reserved for random access devices */
+
+ u8 information[4]; /* for direct-access devices, contains the unsigned
+ * logical block address or residue associated with
+ * the sense key
+ */
+ u8 add_sense_len; /* number of additional sense bytes to follow this field */
+ u8 cmnd_info[4]; /* not used */
+ u8 ASC; /* Additional Sense Code */
+ u8 ASCQ; /* Additional Sense Code Qualifier */
+ u8 FRUC; /* Field Replaceable Unit Code - not used */
+ u8 bit_ptr:3; /* indicates which byte of the CDB or parameter data
+ * was in error
+ */
+ u8 BPV:1; /* bit pointer valid (BPV): 1- indicates that
+ * the bit_ptr field has valid value
+ */
+ u8 reserved2:2;
+ u8 CD:1; /* command data bit: 1- illegal parameter in CDB.
+ * 0- illegal parameter in data.
+ */
+ u8 SKSV:1;
+ u8 field_ptr[2]; /* byte of the CDB or parameter data in error */
+};
+
+struct fsa_dev_info {
+ u64 last;
+ u64 size;
+ u32 type;
+ u16 queue_depth;
+ u8 valid;
+ u8 ro;
+ u8 locked;
+ u8 deleted;
+ char devname[8];
+ struct sense_data sense_data;
+};
+
+struct fib {
+ void *next; /* this is used by the allocator */
+ s16 type;
+ s16 size;
+ /*
+ * The Adapter that this I/O is destined for.
+ */
+ struct aac_dev *dev;
+ /*
+ * This is the event the sendfib routine will wait on if the
+ * caller did not pass one and this is synch io.
+ */
+ struct semaphore event_wait;
+ spinlock_t event_lock;
+
+ u32 done; /* gets set to 1 when fib is complete */
+ fib_callback callback;
+ void *callback_data;
+ u32 flags; // u32 dmb was ulong
+ /*
+ * The following is used to put this fib context onto the
+ * Outstanding I/O queue.
+ */
+ struct list_head queue;
+ /*
+ * And for the internal issue/reply queues (we may be able
+ * to merge these two)
+ */
+ struct list_head fiblink;
+ void *data;
+ struct hw_fib *hw_fib; /* Actual shared object */
+ dma_addr_t hw_fib_pa; /* physical address of hw_fib*/
+};
+
+/*
+ * Adapter Information Block
+ *
+ * This is returned by the RequestAdapterInfo block
+ */
+
+struct aac_adapter_info
+{
+ u32 platform;
+ u32 cpu;
+ u32 subcpu;
+ u32 clock;
+ u32 execmem;
+ u32 buffermem;
+ u32 totalmem;
+ u32 kernelrev;
+ u32 kernelbuild;
+ u32 monitorrev;
+ u32 monitorbuild;
+ u32 hwrev;
+ u32 hwbuild;
+ u32 biosrev;
+ u32 biosbuild;
+ u32 cluster;
+ u32 clusterchannelmask;
+ u32 serial[2];
+ u32 battery;
+ u32 options;
+ u32 OEM;
+};
+
+/*
+ * Battery platforms
+ */
+#define AAC_BAT_REQ_PRESENT (1)
+#define AAC_BAT_REQ_NOTPRESENT (2)
+#define AAC_BAT_OPT_PRESENT (3)
+#define AAC_BAT_OPT_NOTPRESENT (4)
+#define AAC_BAT_NOT_SUPPORTED (5)
+/*
+ * cpu types
+ */
+#define AAC_CPU_SIMULATOR (1)
+#define AAC_CPU_I960 (2)
+#define AAC_CPU_STRONGARM (3)
+
+/*
+ * Supported Options
+ */
+#define AAC_OPT_SNAPSHOT cpu_to_le32(1)
+#define AAC_OPT_CLUSTERS cpu_to_le32(1<<1)
+#define AAC_OPT_WRITE_CACHE cpu_to_le32(1<<2)
+#define AAC_OPT_64BIT_DATA cpu_to_le32(1<<3)
+#define AAC_OPT_HOST_TIME_FIB cpu_to_le32(1<<4)
+#define AAC_OPT_RAID50 cpu_to_le32(1<<5)
+#define AAC_OPT_4GB_WINDOW cpu_to_le32(1<<6)
+#define AAC_OPT_SCSI_UPGRADEABLE cpu_to_le32(1<<7)
+#define AAC_OPT_SOFT_ERR_REPORT cpu_to_le32(1<<8)
+#define AAC_OPT_SUPPORTED_RECONDITION cpu_to_le32(1<<9)
+#define AAC_OPT_SGMAP_HOST64 cpu_to_le32(1<<10)
+#define AAC_OPT_ALARM cpu_to_le32(1<<11)
+#define AAC_OPT_NONDASD cpu_to_le32(1<<12)
+#define AAC_OPT_SCSI_MANAGED cpu_to_le32(1<<13)
+#define AAC_OPT_RAID_SCSI_MODE cpu_to_le32(1<<14)
+#define AAC_OPT_SUPPLEMENT_ADAPTER_INFO cpu_to_le32(1<<16)
+#define AAC_OPT_NEW_COMM cpu_to_le32(1<<17)
+#define AAC_OPT_NEW_COMM_64 cpu_to_le32(1<<18)
+
+struct aac_dev
+{
+ struct list_head entry;
+ const char *name;
+ int id;
+
+ u16 irq_mask;
+ /*
+ * Map for 128 fib objects (64k)
+ */
+ dma_addr_t hw_fib_pa;
+ struct hw_fib *hw_fib_va;
+ struct hw_fib *aif_base_va;
+ /*
+ * Fib Headers
+ */
+ struct fib *fibs;
+
+ struct fib *free_fib;
+ struct fib *timeout_fib;
+ spinlock_t fib_lock;
+
+ struct aac_queue_block *queues;
+ /*
+ * The user API will use an IOCTL to register itself to receive
+ * FIBs from the adapter. The following list is used to keep
+ * track of all the threads that have requested these FIBs. The
+ * mutex is used to synchronize access to all data associated
+ * with the adapter fibs.
+ */
+ struct list_head fib_list;
+
+ struct adapter_ops a_ops;
+ unsigned long fsrev; /* Main driver's revision number */
+
+ struct aac_init *init; /* Holds initialization info to communicate with adapter */
+ dma_addr_t init_pa; /* Holds physical address of the init struct */
+
+ struct pci_dev *pdev; /* Our PCI interface */
+ void * printfbuf; /* pointer to buffer used for printf's from the adapter */
+ void * comm_addr; /* Base address of Comm area */
+ dma_addr_t comm_phys; /* Physical Address of Comm area */
+ size_t comm_size;
+
+ struct Scsi_Host *scsi_host_ptr;
+ int maximum_num_containers;
+ struct fsa_dev_info *fsa_dev;
+ pid_t thread_pid;
+ int cardtype;
+
+ /*
+ * The following is the device specific extension.
+ */
+ union
+ {
+ struct sa_registers __iomem *sa;
+ struct rx_registers __iomem *rx;
+ struct rkt_registers __iomem *rkt;
+ } regs;
+ u32 OIMR; /* Mask Register Cache */
+ /*
+ * AIF thread states
+ */
+ u32 aif_thread;
+ struct completion aif_completion;
+ struct aac_adapter_info adapter_info;
+ /* These are in adapter info but they are in the io flow so
+ * lets break them out so we don't have to do an AND to check them
+ */
+ u8 nondasd_support;
+ u8 dac_support;
+ u8 raid_scsi_mode;
+};
+
+#define aac_adapter_interrupt(dev) \
+ (dev)->a_ops.adapter_interrupt(dev)
+
+#define aac_adapter_notify(dev, event) \
+ (dev)->a_ops.adapter_notify(dev, event)
+
+
+#define aac_adapter_check_health(dev) \
+ (dev)->a_ops.adapter_check_health(dev)
+
+
+#define FIB_CONTEXT_FLAG_TIMED_OUT (0x00000001)
+
+/*
+ * Define the command values
+ */
+
+#define Null 0
+#define GetAttributes 1
+#define SetAttributes 2
+#define Lookup 3
+#define ReadLink 4
+#define Read 5
+#define Write 6
+#define Create 7
+#define MakeDirectory 8
+#define SymbolicLink 9
+#define MakeNode 10
+#define Removex 11
+#define RemoveDirectoryx 12
+#define Rename 13
+#define Link 14
+#define ReadDirectory 15
+#define ReadDirectoryPlus 16
+#define FileSystemStatus 17
+#define FileSystemInfo 18
+#define PathConfigure 19
+#define Commit 20
+#define Mount 21
+#define UnMount 22
+#define Newfs 23
+#define FsCheck 24
+#define FsSync 25
+#define SimReadWrite 26
+#define SetFileSystemStatus 27
+#define BlockRead 28
+#define BlockWrite 29
+#define NvramIoctl 30
+#define FsSyncWait 31
+#define ClearArchiveBit 32
+#define SetAcl 33
+#define GetAcl 34
+#define AssignAcl 35
+#define FaultInsertion 36 /* Fault Insertion Command */
+#define CrazyCache 37 /* Crazycache */
+
+#define MAX_FSACOMMAND_NUM 38
+
+
+/*
+ * Define the status returns. These are very unixlike although
+ * most are not in fact used
+ */
+
+#define ST_OK 0
+#define ST_PERM 1
+#define ST_NOENT 2
+#define ST_IO 5
+#define ST_NXIO 6
+#define ST_E2BIG 7
+#define ST_ACCES 13
+#define ST_EXIST 17
+#define ST_XDEV 18
+#define ST_NODEV 19
+#define ST_NOTDIR 20
+#define ST_ISDIR 21
+#define ST_INVAL 22
+#define ST_FBIG 27
+#define ST_NOSPC 28
+#define ST_ROFS 30
+#define ST_MLINK 31
+#define ST_WOULDBLOCK 35
+#define ST_NAMETOOLONG 63
+#define ST_NOTEMPTY 66
+#define ST_DQUOT 69
+#define ST_STALE 70
+#define ST_REMOTE 71
+#define ST_BADHANDLE 10001
+#define ST_NOT_SYNC 10002
+#define ST_BAD_COOKIE 10003
+#define ST_NOTSUPP 10004
+#define ST_TOOSMALL 10005
+#define ST_SERVERFAULT 10006
+#define ST_BADTYPE 10007
+#define ST_JUKEBOX 10008
+#define ST_NOTMOUNTED 10009
+#define ST_MAINTMODE 10010
+#define ST_STALEACL 10011
+
+/*
+ * On writes how does the client want the data written.
+ */
+
+#define CACHE_CSTABLE 1
+#define CACHE_UNSTABLE 2
+
+/*
+ * Lets the client know at which level the data was commited on
+ * a write request
+ */
+
+#define CMFILE_SYNCH_NVRAM 1
+#define CMDATA_SYNCH_NVRAM 2
+#define CMFILE_SYNCH 3
+#define CMDATA_SYNCH 4
+#define CMUNSTABLE 5
+
+struct aac_read
+{
+ u32 command;
+ u32 cid;
+ u32 block;
+ u32 count;
+ struct sgmap sg; // Must be last in struct because it is variable
+};
+
+struct aac_read64
+{
+ u32 command;
+ u16 cid;
+ u16 sector_count;
+ u32 block;
+ u16 pad;
+ u16 flags;
+ struct sgmap64 sg; // Must be last in struct because it is variable
+};
+
+struct aac_read_reply
+{
+ u32 status;
+ u32 count;
+};
+
+struct aac_write
+{
+ u32 command;
+ u32 cid;
+ u32 block;
+ u32 count;
+ u32 stable; // Not used
+ struct sgmap sg; // Must be last in struct because it is variable
+};
+
+struct aac_write64
+{
+ u32 command;
+ u16 cid;
+ u16 sector_count;
+ u32 block;
+ u16 pad;
+ u16 flags;
+ struct sgmap64 sg; // Must be last in struct because it is variable
+};
+struct aac_write_reply
+{
+ u32 status;
+ u32 count;
+ u32 committed;
+};
+
+#define CT_FLUSH_CACHE 129
+struct aac_synchronize {
+ u32 command; /* VM_ContainerConfig */
+ u32 type; /* CT_FLUSH_CACHE */
+ u32 cid;
+ u32 parm1;
+ u32 parm2;
+ u32 parm3;
+ u32 parm4;
+ u32 count; /* sizeof(((struct aac_synchronize_reply *)NULL)->data) */
+};
+
+struct aac_synchronize_reply {
+ u32 dummy0;
+ u32 dummy1;
+ u32 status; /* CT_OK */
+ u32 parm1;
+ u32 parm2;
+ u32 parm3;
+ u32 parm4;
+ u32 parm5;
+ u8 data[16];
+};
+
+struct aac_srb
+{
+ u32 function;
+ u32 channel;
+ u32 id;
+ u32 lun;
+ u32 timeout;
+ u32 flags;
+ u32 count; // Data xfer size
+ u32 retry_limit;
+ u32 cdb_size;
+ u8 cdb[16];
+ struct sgmap sg;
+};
+
+
+
+#define AAC_SENSE_BUFFERSIZE 30
+
+struct aac_srb_reply
+{
+ u32 status;
+ u32 srb_status;
+ u32 scsi_status;
+ u32 data_xfer_length;
+ u32 sense_data_size;
+ u8 sense_data[AAC_SENSE_BUFFERSIZE]; // Can this be SCSI_SENSE_BUFFERSIZE
+};
+/*
+ * SRB Flags
+ */
+#define SRB_NoDataXfer 0x0000
+#define SRB_DisableDisconnect 0x0004
+#define SRB_DisableSynchTransfer 0x0008
+#define SRB_BypassFrozenQueue 0x0010
+#define SRB_DisableAutosense 0x0020
+#define SRB_DataIn 0x0040
+#define SRB_DataOut 0x0080
+
+/*
+ * SRB Functions - set in aac_srb->function
+ */
+#define SRBF_ExecuteScsi 0x0000
+#define SRBF_ClaimDevice 0x0001
+#define SRBF_IO_Control 0x0002
+#define SRBF_ReceiveEvent 0x0003
+#define SRBF_ReleaseQueue 0x0004
+#define SRBF_AttachDevice 0x0005
+#define SRBF_ReleaseDevice 0x0006
+#define SRBF_Shutdown 0x0007
+#define SRBF_Flush 0x0008
+#define SRBF_AbortCommand 0x0010
+#define SRBF_ReleaseRecovery 0x0011
+#define SRBF_ResetBus 0x0012
+#define SRBF_ResetDevice 0x0013
+#define SRBF_TerminateIO 0x0014
+#define SRBF_FlushQueue 0x0015
+#define SRBF_RemoveDevice 0x0016
+#define SRBF_DomainValidation 0x0017
+
+/*
+ * SRB SCSI Status - set in aac_srb->scsi_status
+ */
+#define SRB_STATUS_PENDING 0x00
+#define SRB_STATUS_SUCCESS 0x01
+#define SRB_STATUS_ABORTED 0x02
+#define SRB_STATUS_ABORT_FAILED 0x03
+#define SRB_STATUS_ERROR 0x04
+#define SRB_STATUS_BUSY 0x05
+#define SRB_STATUS_INVALID_REQUEST 0x06
+#define SRB_STATUS_INVALID_PATH_ID 0x07
+#define SRB_STATUS_NO_DEVICE 0x08
+#define SRB_STATUS_TIMEOUT 0x09
+#define SRB_STATUS_SELECTION_TIMEOUT 0x0A
+#define SRB_STATUS_COMMAND_TIMEOUT 0x0B
+#define SRB_STATUS_MESSAGE_REJECTED 0x0D
+#define SRB_STATUS_BUS_RESET 0x0E
+#define SRB_STATUS_PARITY_ERROR 0x0F
+#define SRB_STATUS_REQUEST_SENSE_FAILED 0x10
+#define SRB_STATUS_NO_HBA 0x11
+#define SRB_STATUS_DATA_OVERRUN 0x12
+#define SRB_STATUS_UNEXPECTED_BUS_FREE 0x13
+#define SRB_STATUS_PHASE_SEQUENCE_FAILURE 0x14
+#define SRB_STATUS_BAD_SRB_BLOCK_LENGTH 0x15
+#define SRB_STATUS_REQUEST_FLUSHED 0x16
+#define SRB_STATUS_DELAYED_RETRY 0x17
+#define SRB_STATUS_INVALID_LUN 0x20
+#define SRB_STATUS_INVALID_TARGET_ID 0x21
+#define SRB_STATUS_BAD_FUNCTION 0x22
+#define SRB_STATUS_ERROR_RECOVERY 0x23
+#define SRB_STATUS_NOT_STARTED 0x24
+#define SRB_STATUS_NOT_IN_USE 0x30
+#define SRB_STATUS_FORCE_ABORT 0x31
+#define SRB_STATUS_DOMAIN_VALIDATION_FAIL 0x32
+
+/*
+ * Object-Server / Volume-Manager Dispatch Classes
+ */
+
+#define VM_Null 0
+#define VM_NameServe 1
+#define VM_ContainerConfig 2
+#define VM_Ioctl 3
+#define VM_FilesystemIoctl 4
+#define VM_CloseAll 5
+#define VM_CtBlockRead 6
+#define VM_CtBlockWrite 7
+#define VM_SliceBlockRead 8 /* raw access to configured "storage objects" */
+#define VM_SliceBlockWrite 9
+#define VM_DriveBlockRead 10 /* raw access to physical devices */
+#define VM_DriveBlockWrite 11
+#define VM_EnclosureMgt 12 /* enclosure management */
+#define VM_Unused 13 /* used to be diskset management */
+#define VM_CtBlockVerify 14
+#define VM_CtPerf 15 /* performance test */
+#define VM_CtBlockRead64 16
+#define VM_CtBlockWrite64 17
+#define VM_CtBlockVerify64 18
+#define VM_CtHostRead64 19
+#define VM_CtHostWrite64 20
+
+#define MAX_VMCOMMAND_NUM 21 /* used for sizing stats array - leave last */
+
+/*
+ * Descriptive information (eg, vital stats)
+ * that a content manager might report. The
+ * FileArray filesystem component is one example
+ * of a content manager. Raw mode might be
+ * another.
+ */
+
+struct aac_fsinfo {
+ u32 fsTotalSize; /* Consumed by fs, incl. metadata */
+ u32 fsBlockSize;
+ u32 fsFragSize;
+ u32 fsMaxExtendSize;
+ u32 fsSpaceUnits;
+ u32 fsMaxNumFiles;
+ u32 fsNumFreeFiles;
+ u32 fsInodeDensity;
+}; /* valid iff ObjType == FT_FILESYS && !(ContentState & FSCS_NOTCLEAN) */
+
+union aac_contentinfo {
+ struct aac_fsinfo filesys; /* valid iff ObjType == FT_FILESYS && !(ContentState & FSCS_NOTCLEAN) */
+};
+
+/*
+ * Query for Container Configuration Status
+ */
+
+#define CT_GET_CONFIG_STATUS 147
+struct aac_get_config_status {
+ u32 command; /* VM_ContainerConfig */
+ u32 type; /* CT_GET_CONFIG_STATUS */
+ u32 parm1;
+ u32 parm2;
+ u32 parm3;
+ u32 parm4;
+ u32 parm5;
+ u32 count; /* sizeof(((struct aac_get_config_status_resp *)NULL)->data) */
+};
+
+#define CFACT_CONTINUE 0
+#define CFACT_PAUSE 1
+#define CFACT_ABORT 2
+struct aac_get_config_status_resp {
+ u32 response; /* ST_OK */
+ u32 dummy0;
+ u32 status; /* CT_OK */
+ u32 parm1;
+ u32 parm2;
+ u32 parm3;
+ u32 parm4;
+ u32 parm5;
+ struct {
+ u32 action; /* CFACT_CONTINUE, CFACT_PAUSE or CFACT_ABORT */
+ u16 flags;
+ s16 count;
+ } data;
+};
+
+/*
+ * Accept the configuration as-is
+ */
+
+#define CT_COMMIT_CONFIG 152
+
+struct aac_commit_config {
+ u32 command; /* VM_ContainerConfig */
+ u32 type; /* CT_COMMIT_CONFIG */
+};
+
+/*
+ * Query for Container Configuration Count
+ */
+
+#define CT_GET_CONTAINER_COUNT 4
+struct aac_get_container_count {
+ u32 command; /* VM_ContainerConfig */
+ u32 type; /* CT_GET_CONTAINER_COUNT */
+};
+
+struct aac_get_container_count_resp {
+ u32 response; /* ST_OK */
+ u32 dummy0;
+ u32 MaxContainers;
+ u32 ContainerSwitchEntries;
+ u32 MaxPartitions;
+};
+
+
+/*
+ * Query for "mountable" objects, ie, objects that are typically
+ * associated with a drive letter on the client (host) side.
+ */
+
+struct aac_mntent {
+ u32 oid;
+ u8 name[16]; // if applicable
+ struct creation_info create_info; // if applicable
+ u32 capacity;
+ u32 vol; // substrate structure
+ u32 obj; // FT_FILESYS, FT_DATABASE, etc.
+ u32 state; // unready for mounting, readonly, etc.
+ union aac_contentinfo fileinfo; // Info specific to content manager (eg, filesystem)
+ u32 altoid; // != oid <==> snapshot or broken mirror exists
+};
+
+#define FSCS_NOTCLEAN 0x0001 /* fsck is neccessary before mounting */
+#define FSCS_READONLY 0x0002 /* possible result of broken mirror */
+#define FSCS_HIDDEN 0x0004 /* should be ignored - set during a clear */
+
+struct aac_query_mount {
+ u32 command;
+ u32 type;
+ u32 count;
+};
+
+struct aac_mount {
+ u32 status;
+ u32 type; /* should be same as that requested */
+ u32 count;
+ struct aac_mntent mnt[1];
+};
+
+#define CT_READ_NAME 130
+struct aac_get_name {
+ u32 command; /* VM_ContainerConfig */
+ u32 type; /* CT_READ_NAME */
+ u32 cid;
+ u32 parm1;
+ u32 parm2;
+ u32 parm3;
+ u32 parm4;
+ u32 count; /* sizeof(((struct aac_get_name_resp *)NULL)->data) */
+};
+
+#define CT_OK 218
+struct aac_get_name_resp {
+ u32 dummy0;
+ u32 dummy1;
+ u32 status; /* CT_OK */
+ u32 parm1;
+ u32 parm2;
+ u32 parm3;
+ u32 parm4;
+ u32 parm5;
+ u8 data[16];
+};
+
+/*
+ * The following command is sent to shut down each container.
+ */
+
+struct aac_close {
+ u32 command;
+ u32 cid;
+};
+
+struct aac_query_disk
+{
+ s32 cnum;
+ s32 bus;
+ s32 id;
+ s32 lun;
+ u32 valid;
+ u32 locked;
+ u32 deleted;
+ s32 instance;
+ s8 name[10];
+ u32 unmapped;
+};
+
+struct aac_delete_disk {
+ u32 disknum;
+ u32 cnum;
+};
+
+struct fib_ioctl
+{
+ u32 fibctx;
+ s32 wait;
+ char __user *fib;
+};
+
+struct revision
+{
+ u32 compat;
+ u32 version;
+ u32 build;
+};
+
+/*
+ * Ugly - non Linux like ioctl coding for back compat.
+ */
+
+#define CTL_CODE(function, method) ( \
+ (4<< 16) | ((function) << 2) | (method) \
+)
+
+/*
+ * Define the method codes for how buffers are passed for I/O and FS
+ * controls
+ */
+
+#define METHOD_BUFFERED 0
+#define METHOD_NEITHER 3
+
+/*
+ * Filesystem ioctls
+ */
+
+#define FSACTL_SENDFIB CTL_CODE(2050, METHOD_BUFFERED)
+#define FSACTL_SEND_RAW_SRB CTL_CODE(2067, METHOD_BUFFERED)
+#define FSACTL_DELETE_DISK 0x163
+#define FSACTL_QUERY_DISK 0x173
+#define FSACTL_OPEN_GET_ADAPTER_FIB CTL_CODE(2100, METHOD_BUFFERED)
+#define FSACTL_GET_NEXT_ADAPTER_FIB CTL_CODE(2101, METHOD_BUFFERED)
+#define FSACTL_CLOSE_GET_ADAPTER_FIB CTL_CODE(2102, METHOD_BUFFERED)
+#define FSACTL_MINIPORT_REV_CHECK CTL_CODE(2107, METHOD_BUFFERED)
+#define FSACTL_GET_PCI_INFO CTL_CODE(2119, METHOD_BUFFERED)
+#define FSACTL_FORCE_DELETE_DISK CTL_CODE(2120, METHOD_NEITHER)
+#define FSACTL_GET_CONTAINERS 2131
+
+
+struct aac_common
+{
+ /*
+ * If this value is set to 1 then interrupt moderation will occur
+ * in the base commuication support.
+ */
+ u32 irq_mod;
+ u32 peak_fibs;
+ u32 zero_fibs;
+ u32 fib_timeouts;
+ /*
+ * Statistical counters in debug mode
+ */
+#ifdef DBG
+ u32 FibsSent;
+ u32 FibRecved;
+ u32 NoResponseSent;
+ u32 NoResponseRecved;
+ u32 AsyncSent;
+ u32 AsyncRecved;
+ u32 NormalSent;
+ u32 NormalRecved;
+#endif
+};
+
+extern struct aac_common aac_config;
+
+
+/*
+ * The following macro is used when sending and receiving FIBs. It is
+ * only used for debugging.
+ */
+
+#ifdef DBG
+#define FIB_COUNTER_INCREMENT(counter) (counter)++
+#else
+#define FIB_COUNTER_INCREMENT(counter)
+#endif
+
+/*
+ * Adapter direct commands
+ * Monitor/Kernel API
+ */
+
+#define BREAKPOINT_REQUEST 0x00000004
+#define INIT_STRUCT_BASE_ADDRESS 0x00000005
+#define READ_PERMANENT_PARAMETERS 0x0000000a
+#define WRITE_PERMANENT_PARAMETERS 0x0000000b
+#define HOST_CRASHING 0x0000000d
+#define SEND_SYNCHRONOUS_FIB 0x0000000c
+#define COMMAND_POST_RESULTS 0x00000014
+#define GET_ADAPTER_PROPERTIES 0x00000019
+#define GET_DRIVER_BUFFER_PROPERTIES 0x00000023
+#define RCV_TEMP_READINGS 0x00000025
+#define GET_COMM_PREFERRED_SETTINGS 0x00000026
+#define IOP_RESET 0x00001000
+#define RE_INIT_ADAPTER 0x000000ee
+
+/*
+ * Adapter Status Register
+ *
+ * Phase Staus mailbox is 32bits:
+ * <31:16> = Phase Status
+ * <15:0> = Phase
+ *
+ * The adapter reports is present state through the phase. Only
+ * a single phase should be ever be set. Each phase can have multiple
+ * phase status bits to provide more detailed information about the
+ * state of the board. Care should be taken to ensure that any phase
+ * status bits that are set when changing the phase are also valid
+ * for the new phase or be cleared out. Adapter software (monitor,
+ * iflash, kernel) is responsible for properly maintining the phase
+ * status mailbox when it is running.
+ *
+ * MONKER_API Phases
+ *
+ * Phases are bit oriented. It is NOT valid to have multiple bits set
+ */
+
+#define SELF_TEST_FAILED 0x00000004
+#define MONITOR_PANIC 0x00000020
+#define KERNEL_UP_AND_RUNNING 0x00000080
+#define KERNEL_PANIC 0x00000100
+
+/*
+ * Doorbell bit defines
+ */
+
+#define DoorBellSyncCmdAvailable (1<<0) /* Host -> Adapter */
+#define DoorBellPrintfDone (1<<5) /* Host -> Adapter */
+#define DoorBellAdapterNormCmdReady (1<<1) /* Adapter -> Host */
+#define DoorBellAdapterNormRespReady (1<<2) /* Adapter -> Host */
+#define DoorBellAdapterNormCmdNotFull (1<<3) /* Adapter -> Host */
+#define DoorBellAdapterNormRespNotFull (1<<4) /* Adapter -> Host */
+#define DoorBellPrintfReady (1<<5) /* Adapter -> Host */
+
+/*
+ * For FIB communication, we need all of the following things
+ * to send back to the user.
+ */
+
+#define AifCmdEventNotify 1 /* Notify of event */
+#define AifEnConfigChange 3 /* Adapter configuration change */
+#define AifEnContainerChange 4 /* Container configuration change */
+#define AifEnDeviceFailure 5 /* SCSI device failed */
+#define AifEnAddContainer 15 /* A new array was created */
+#define AifEnDeleteContainer 16 /* A container was deleted */
+#define AifEnExpEvent 23 /* Firmware Event Log */
+#define AifExeFirmwarePanic 3 /* Firmware Event Panic */
+#define AifHighPriority 3 /* Highest Priority Event */
+
+#define AifCmdJobProgress 2 /* Progress report */
+#define AifJobCtrZero 101 /* Array Zero progress */
+#define AifJobStsSuccess 1 /* Job completes */
+#define AifCmdAPIReport 3 /* Report from other user of API */
+#define AifCmdDriverNotify 4 /* Notify host driver of event */
+#define AifDenMorphComplete 200 /* A morph operation completed */
+#define AifDenVolumeExtendComplete 201 /* A volume extend completed */
+#define AifReqJobList 100 /* Gets back complete job list */
+#define AifReqJobsForCtr 101 /* Gets back jobs for specific container */
+#define AifReqJobsForScsi 102 /* Gets back jobs for specific SCSI device */
+#define AifReqJobReport 103 /* Gets back a specific job report or list of them */
+#define AifReqTerminateJob 104 /* Terminates job */
+#define AifReqSuspendJob 105 /* Suspends a job */
+#define AifReqResumeJob 106 /* Resumes a job */
+#define AifReqSendAPIReport 107 /* API generic report requests */
+#define AifReqAPIJobStart 108 /* Start a job from the API */
+#define AifReqAPIJobUpdate 109 /* Update a job report from the API */
+#define AifReqAPIJobFinish 110 /* Finish a job from the API */
+
+/*
+ * Adapter Initiated FIB command structures. Start with the adapter
+ * initiated FIBs that really come from the adapter, and get responded
+ * to by the host.
+ */
+
+struct aac_aifcmd {
+ u32 command; /* Tell host what type of notify this is */
+ u32 seqnum; /* To allow ordering of reports (if necessary) */
+ u8 data[1]; /* Undefined length (from kernel viewpoint) */
+};
+
+/**
+ * Convert capacity to cylinders
+ * accounting for the fact capacity could be a 64 bit value
+ *
+ */
+static inline u32 cap_to_cyls(sector_t capacity, u32 divisor)
+{
+ sector_div(capacity, divisor);
+ return (u32)capacity;
+}
+
+struct scsi_cmnd;
+
+const char *aac_driverinfo(struct Scsi_Host *);
+struct fib *fib_alloc(struct aac_dev *dev);
+int fib_setup(struct aac_dev *dev);
+void fib_map_free(struct aac_dev *dev);
+void fib_free(struct fib * context);
+void fib_init(struct fib * context);
+void fib_dealloc(struct fib * context);
+void aac_printf(struct aac_dev *dev, u32 val);
+int fib_send(u16 command, struct fib * context, unsigned long size, int priority, int wait, int reply, fib_callback callback, void *ctxt);
+int aac_consumer_get(struct aac_dev * dev, struct aac_queue * q, struct aac_entry **entry);
+void aac_consumer_free(struct aac_dev * dev, struct aac_queue * q, u32 qnum);
+int fib_complete(struct fib * context);
+#define fib_data(fibctx) ((void *)(fibctx)->hw_fib->data)
+struct aac_dev *aac_init_adapter(struct aac_dev *dev);
+int aac_get_config_status(struct aac_dev *dev);
+int aac_get_containers(struct aac_dev *dev);
+int aac_scsi_cmd(struct scsi_cmnd *cmd);
+int aac_dev_ioctl(struct aac_dev *dev, int cmd, void __user *arg);
+int aac_do_ioctl(struct aac_dev * dev, int cmd, void __user *arg);
+int aac_rx_init(struct aac_dev *dev);
+int aac_rkt_init(struct aac_dev *dev);
+int aac_sa_init(struct aac_dev *dev);
+unsigned int aac_response_normal(struct aac_queue * q);
+unsigned int aac_command_normal(struct aac_queue * q);
+int aac_command_thread(struct aac_dev * dev);
+int aac_close_fib_context(struct aac_dev * dev, struct aac_fib_context *fibctx);
+int fib_adapter_complete(struct fib * fibptr, unsigned short size);
+struct aac_driver_ident* aac_get_driver_ident(int devtype);
+int aac_get_adapter_info(struct aac_dev* dev);
+int aac_send_shutdown(struct aac_dev *dev);
diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c
new file mode 100644
index 000000000000..30dd1f7120f4
--- /dev/null
+++ b/drivers/scsi/aacraid/commctrl.c
@@ -0,0 +1,683 @@
+/*
+ * Adaptec AAC series RAID controller driver
+ * (c) Copyright 2001 Red Hat Inc. <alan@redhat.com>
+ *
+ * based on the old aacraid driver that is..
+ * Adaptec aacraid device driver for Linux.
+ *
+ * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Module Name:
+ * commctrl.c
+ *
+ * Abstract: Contains all routines for control of the AFA comm layer
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/completion.h>
+#include <linux/dma-mapping.h>
+#include <linux/blkdev.h>
+#include <asm/semaphore.h>
+#include <asm/uaccess.h>
+
+#include "aacraid.h"
+
+/**
+ * ioctl_send_fib - send a FIB from userspace
+ * @dev: adapter is being processed
+ * @arg: arguments to the ioctl call
+ *
+ * This routine sends a fib to the adapter on behalf of a user level
+ * program.
+ */
+
+static int ioctl_send_fib(struct aac_dev * dev, void __user *arg)
+{
+ struct hw_fib * kfib;
+ struct fib *fibptr;
+
+ fibptr = fib_alloc(dev);
+ if(fibptr == NULL)
+ return -ENOMEM;
+
+ kfib = fibptr->hw_fib;
+ /*
+ * First copy in the header so that we can check the size field.
+ */
+ if (copy_from_user((void *)kfib, arg, sizeof(struct aac_fibhdr))) {
+ fib_free(fibptr);
+ return -EFAULT;
+ }
+ /*
+ * Since we copy based on the fib header size, make sure that we
+ * will not overrun the buffer when we copy the memory. Return
+ * an error if we would.
+ */
+ if (le16_to_cpu(kfib->header.Size) >
+ sizeof(struct hw_fib) - sizeof(struct aac_fibhdr)) {
+ fib_free(fibptr);
+ return -EINVAL;
+ }
+
+ if (copy_from_user(kfib, arg, le16_to_cpu(kfib->header.Size) +
+ sizeof(struct aac_fibhdr))) {
+ fib_free(fibptr);
+ return -EFAULT;
+ }
+
+ if (kfib->header.Command == cpu_to_le32(TakeABreakPt)) {
+ aac_adapter_interrupt(dev);
+ /*
+ * Since we didn't really send a fib, zero out the state to allow
+ * cleanup code not to assert.
+ */
+ kfib->header.XferState = 0;
+ } else {
+ int retval = fib_send(kfib->header.Command, fibptr,
+ le16_to_cpu(kfib->header.Size) , FsaNormal,
+ 1, 1, NULL, NULL);
+ if (retval) {
+ fib_free(fibptr);
+ return retval;
+ }
+ if (fib_complete(fibptr) != 0) {
+ fib_free(fibptr);
+ return -EINVAL;
+ }
+ }
+ /*
+ * Make sure that the size returned by the adapter (which includes
+ * the header) is less than or equal to the size of a fib, so we
+ * don't corrupt application data. Then copy that size to the user
+ * buffer. (Don't try to add the header information again, since it
+ * was already included by the adapter.)
+ */
+
+ if (copy_to_user(arg, (void *)kfib, kfib->header.Size)) {
+ fib_free(fibptr);
+ return -EFAULT;
+ }
+ fib_free(fibptr);
+ return 0;
+}
+
+/**
+ * open_getadapter_fib - Get the next fib
+ *
+ * This routine will get the next Fib, if available, from the AdapterFibContext
+ * passed in from the user.
+ */
+
+static int open_getadapter_fib(struct aac_dev * dev, void __user *arg)
+{
+ struct aac_fib_context * fibctx;
+ int status;
+
+ fibctx = kmalloc(sizeof(struct aac_fib_context), GFP_KERNEL);
+ if (fibctx == NULL) {
+ status = -ENOMEM;
+ } else {
+ unsigned long flags;
+ struct list_head * entry;
+ struct aac_fib_context * context;
+
+ fibctx->type = FSAFS_NTC_GET_ADAPTER_FIB_CONTEXT;
+ fibctx->size = sizeof(struct aac_fib_context);
+ /*
+ * Yes yes, I know this could be an index, but we have a
+ * better guarantee of uniqueness for the locked loop below.
+ * Without the aid of a persistent history, this also helps
+ * reduce the chance that the opaque context would be reused.
+ */
+ fibctx->unique = (u32)((ulong)fibctx & 0xFFFFFFFF);
+ /*
+ * Initialize the mutex used to wait for the next AIF.
+ */
+ init_MUTEX_LOCKED(&fibctx->wait_sem);
+ fibctx->wait = 0;
+ /*
+ * Initialize the fibs and set the count of fibs on
+ * the list to 0.
+ */
+ fibctx->count = 0;
+ INIT_LIST_HEAD(&fibctx->fib_list);
+ fibctx->jiffies = jiffies/HZ;
+ /*
+ * Now add this context onto the adapter's
+ * AdapterFibContext list.
+ */
+ spin_lock_irqsave(&dev->fib_lock, flags);
+ /* Ensure that we have a unique identifier */
+ entry = dev->fib_list.next;
+ while (entry != &dev->fib_list) {
+ context = list_entry(entry, struct aac_fib_context, next);
+ if (context->unique == fibctx->unique) {
+ /* Not unique (32 bits) */
+ fibctx->unique++;
+ entry = dev->fib_list.next;
+ } else {
+ entry = entry->next;
+ }
+ }
+ list_add_tail(&fibctx->next, &dev->fib_list);
+ spin_unlock_irqrestore(&dev->fib_lock, flags);
+ if (copy_to_user(arg, &fibctx->unique,
+ sizeof(fibctx->unique))) {
+ status = -EFAULT;
+ } else {
+ status = 0;
+ }
+ }
+ return status;
+}
+
+/**
+ * next_getadapter_fib - get the next fib
+ * @dev: adapter to use
+ * @arg: ioctl argument
+ *
+ * This routine will get the next Fib, if available, from the AdapterFibContext
+ * passed in from the user.
+ */
+
+static int next_getadapter_fib(struct aac_dev * dev, void __user *arg)
+{
+ struct fib_ioctl f;
+ struct fib *fib;
+ struct aac_fib_context *fibctx;
+ int status;
+ struct list_head * entry;
+ unsigned long flags;
+
+ if(copy_from_user((void *)&f, arg, sizeof(struct fib_ioctl)))
+ return -EFAULT;
+ /*
+ * Verify that the HANDLE passed in was a valid AdapterFibContext
+ *
+ * Search the list of AdapterFibContext addresses on the adapter
+ * to be sure this is a valid address
+ */
+ entry = dev->fib_list.next;
+ fibctx = NULL;
+
+ while (entry != &dev->fib_list) {
+ fibctx = list_entry(entry, struct aac_fib_context, next);
+ /*
+ * Extract the AdapterFibContext from the Input parameters.
+ */
+ if (fibctx->unique == f.fibctx) { /* We found a winner */
+ break;
+ }
+ entry = entry->next;
+ fibctx = NULL;
+ }
+ if (!fibctx) {
+ dprintk ((KERN_INFO "Fib Context not found\n"));
+ return -EINVAL;
+ }
+
+ if((fibctx->type != FSAFS_NTC_GET_ADAPTER_FIB_CONTEXT) ||
+ (fibctx->size != sizeof(struct aac_fib_context))) {
+ dprintk ((KERN_INFO "Fib Context corrupt?\n"));
+ return -EINVAL;
+ }
+ status = 0;
+ spin_lock_irqsave(&dev->fib_lock, flags);
+ /*
+ * If there are no fibs to send back, then either wait or return
+ * -EAGAIN
+ */
+return_fib:
+ if (!list_empty(&fibctx->fib_list)) {
+ struct list_head * entry;
+ /*
+ * Pull the next fib from the fibs
+ */
+ entry = fibctx->fib_list.next;
+ list_del(entry);
+
+ fib = list_entry(entry, struct fib, fiblink);
+ fibctx->count--;
+ spin_unlock_irqrestore(&dev->fib_lock, flags);
+ if (copy_to_user(f.fib, fib->hw_fib, sizeof(struct hw_fib))) {
+ kfree(fib->hw_fib);
+ kfree(fib);
+ return -EFAULT;
+ }
+ /*
+ * Free the space occupied by this copy of the fib.
+ */
+ kfree(fib->hw_fib);
+ kfree(fib);
+ status = 0;
+ fibctx->jiffies = jiffies/HZ;
+ } else {
+ spin_unlock_irqrestore(&dev->fib_lock, flags);
+ if (f.wait) {
+ if(down_interruptible(&fibctx->wait_sem) < 0) {
+ status = -EINTR;
+ } else {
+ /* Lock again and retry */
+ spin_lock_irqsave(&dev->fib_lock, flags);
+ goto return_fib;
+ }
+ } else {
+ status = -EAGAIN;
+ }
+ }
+ return status;
+}
+
+int aac_close_fib_context(struct aac_dev * dev, struct aac_fib_context * fibctx)
+{
+ struct fib *fib;
+
+ /*
+ * First free any FIBs that have not been consumed.
+ */
+ while (!list_empty(&fibctx->fib_list)) {
+ struct list_head * entry;
+ /*
+ * Pull the next fib from the fibs
+ */
+ entry = fibctx->fib_list.next;
+ list_del(entry);
+ fib = list_entry(entry, struct fib, fiblink);
+ fibctx->count--;
+ /*
+ * Free the space occupied by this copy of the fib.
+ */
+ kfree(fib->hw_fib);
+ kfree(fib);
+ }
+ /*
+ * Remove the Context from the AdapterFibContext List
+ */
+ list_del(&fibctx->next);
+ /*
+ * Invalidate context
+ */
+ fibctx->type = 0;
+ /*
+ * Free the space occupied by the Context
+ */
+ kfree(fibctx);
+ return 0;
+}
+
+/**
+ * close_getadapter_fib - close down user fib context
+ * @dev: adapter
+ * @arg: ioctl arguments
+ *
+ * This routine will close down the fibctx passed in from the user.
+ */
+
+static int close_getadapter_fib(struct aac_dev * dev, void __user *arg)
+{
+ struct aac_fib_context *fibctx;
+ int status;
+ unsigned long flags;
+ struct list_head * entry;
+
+ /*
+ * Verify that the HANDLE passed in was a valid AdapterFibContext
+ *
+ * Search the list of AdapterFibContext addresses on the adapter
+ * to be sure this is a valid address
+ */
+
+ entry = dev->fib_list.next;
+ fibctx = NULL;
+
+ while(entry != &dev->fib_list) {
+ fibctx = list_entry(entry, struct aac_fib_context, next);
+ /*
+ * Extract the fibctx from the input parameters
+ */
+ if (fibctx->unique == (u32)(unsigned long)arg) {
+ /* We found a winner */
+ break;
+ }
+ entry = entry->next;
+ fibctx = NULL;
+ }
+
+ if (!fibctx)
+ return 0; /* Already gone */
+
+ if((fibctx->type != FSAFS_NTC_GET_ADAPTER_FIB_CONTEXT) ||
+ (fibctx->size != sizeof(struct aac_fib_context)))
+ return -EINVAL;
+ spin_lock_irqsave(&dev->fib_lock, flags);
+ status = aac_close_fib_context(dev, fibctx);
+ spin_unlock_irqrestore(&dev->fib_lock, flags);
+ return status;
+}
+
+/**
+ * check_revision - close down user fib context
+ * @dev: adapter
+ * @arg: ioctl arguments
+ *
+ * This routine returns the driver version.
+ * Under Linux, there have been no version incompatibilities, so this is
+ * simple!
+ */
+
+static int check_revision(struct aac_dev *dev, void __user *arg)
+{
+ struct revision response;
+
+ response.compat = 1;
+ response.version = dev->adapter_info.kernelrev;
+ response.build = dev->adapter_info.kernelbuild;
+
+ if (copy_to_user(arg, &response, sizeof(response)))
+ return -EFAULT;
+ return 0;
+}
+
+/**
+ *
+ * aac_send_raw_scb
+ *
+ */
+
+int aac_send_raw_srb(struct aac_dev* dev, void __user * arg)
+{
+ struct fib* srbfib;
+ int status;
+ struct aac_srb *srbcmd;
+ struct aac_srb __user *user_srb = arg;
+ struct aac_srb_reply __user *user_reply;
+ struct aac_srb_reply* reply;
+ u32 fibsize = 0;
+ u32 flags = 0;
+ s32 rcode = 0;
+ u32 data_dir;
+ void __user *sg_user[32];
+ void *sg_list[32];
+ u32 sg_indx = 0;
+ u32 byte_count = 0;
+ u32 actual_fibsize = 0;
+ int i;
+
+
+ if (!capable(CAP_SYS_ADMIN)){
+ printk(KERN_DEBUG"aacraid: No permission to send raw srb\n");
+ return -EPERM;
+ }
+ /*
+ * Allocate and initialize a Fib then setup a BlockWrite command
+ */
+ if (!(srbfib = fib_alloc(dev))) {
+ return -1;
+ }
+ fib_init(srbfib);
+
+ srbcmd = (struct aac_srb*) fib_data(srbfib);
+
+ if(copy_from_user(&fibsize, &user_srb->count,sizeof(u32))){
+ printk(KERN_DEBUG"aacraid: Could not copy data size from user\n");
+ rcode = -EFAULT;
+ goto cleanup;
+ }
+
+ if (fibsize > FIB_DATA_SIZE_IN_BYTES) {
+ rcode = -EINVAL;
+ goto cleanup;
+ }
+
+ if(copy_from_user(srbcmd, user_srb,fibsize)){
+ printk(KERN_DEBUG"aacraid: Could not copy srb from user\n");
+ rcode = -EFAULT;
+ goto cleanup;
+ }
+
+ user_reply = arg+fibsize;
+
+ flags = srbcmd->flags;
+ // Fix up srb for endian and force some values
+ srbcmd->function = cpu_to_le32(SRBF_ExecuteScsi); // Force this
+ srbcmd->channel = cpu_to_le32(srbcmd->channel);
+ srbcmd->id = cpu_to_le32(srbcmd->id);
+ srbcmd->lun = cpu_to_le32(srbcmd->lun);
+ srbcmd->flags = cpu_to_le32(srbcmd->flags);
+ srbcmd->timeout = cpu_to_le32(srbcmd->timeout);
+ srbcmd->retry_limit =cpu_to_le32(0); // Obsolete parameter
+ srbcmd->cdb_size = cpu_to_le32(srbcmd->cdb_size);
+
+ switch (srbcmd->flags & (SRB_DataIn | SRB_DataOut)) {
+ case SRB_DataOut:
+ data_dir = DMA_TO_DEVICE;
+ break;
+ case (SRB_DataIn | SRB_DataOut):
+ data_dir = DMA_BIDIRECTIONAL;
+ break;
+ case SRB_DataIn:
+ data_dir = DMA_FROM_DEVICE;
+ break;
+ default:
+ data_dir = DMA_NONE;
+ }
+ if (dev->dac_support == 1) {
+ struct sgmap64* psg = (struct sgmap64*)&srbcmd->sg;
+ byte_count = 0;
+
+ /*
+ * This should also catch if user used the 32 bit sgmap
+ */
+ actual_fibsize = sizeof(struct aac_srb) -
+ sizeof(struct sgentry) + ((srbcmd->sg.count & 0xff) *
+ sizeof(struct sgentry64));
+ if(actual_fibsize != fibsize){ // User made a mistake - should not continue
+ printk(KERN_DEBUG"aacraid: Bad Size specified in Raw SRB command\n");
+ rcode = -EINVAL;
+ goto cleanup;
+ }
+ if ((data_dir == DMA_NONE) && psg->count) {
+ printk(KERN_DEBUG"aacraid: SG with no direction specified in Raw SRB command\n");
+ rcode = -EINVAL;
+ goto cleanup;
+ }
+
+ for (i = 0; i < psg->count; i++) {
+ dma_addr_t addr;
+ u64 le_addr;
+ void* p;
+ p = kmalloc(psg->sg[i].count,GFP_KERNEL|__GFP_DMA);
+ if(p == 0) {
+ printk(KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
+ psg->sg[i].count,i,psg->count);
+ rcode = -ENOMEM;
+ goto cleanup;
+ }
+ sg_user[i] = (void __user *)psg->sg[i].addr;
+ sg_list[i] = p; // save so we can clean up later
+ sg_indx = i;
+
+ if( flags & SRB_DataOut ){
+ if(copy_from_user(p,sg_user[i],psg->sg[i].count)){
+ printk(KERN_DEBUG"aacraid: Could not copy sg data from user\n");
+ rcode = -EFAULT;
+ goto cleanup;
+ }
+ }
+ addr = pci_map_single(dev->pdev, p, psg->sg[i].count, data_dir);
+
+ le_addr = cpu_to_le64(addr);
+ psg->sg[i].addr[1] = (u32)(le_addr>>32);
+ psg->sg[i].addr[0] = (u32)(le_addr & 0xffffffff);
+ psg->sg[i].count = cpu_to_le32(psg->sg[i].count);
+ byte_count += psg->sg[i].count;
+ }
+
+ srbcmd->count = cpu_to_le32(byte_count);
+ status = fib_send(ScsiPortCommand64, srbfib, actual_fibsize, FsaNormal, 1, 1,NULL,NULL);
+ } else {
+ struct sgmap* psg = &srbcmd->sg;
+ byte_count = 0;
+
+ actual_fibsize = sizeof (struct aac_srb) +
+ (((le32_to_cpu(srbcmd->sg.count) & 0xff) - 1) *
+ sizeof (struct sgentry));
+ if(actual_fibsize != fibsize){ // User made a mistake - should not continue
+ printk(KERN_DEBUG"aacraid: Bad Size specified in Raw SRB command\n");
+ rcode = -EINVAL;
+ goto cleanup;
+ }
+ if ((data_dir == DMA_NONE) && psg->count) {
+ printk(KERN_DEBUG"aacraid: SG with no direction specified in Raw SRB command\n");
+ rcode = -EINVAL;
+ goto cleanup;
+ }
+ for (i = 0; i < psg->count; i++) {
+ dma_addr_t addr;
+ void* p;
+ p = kmalloc(psg->sg[i].count,GFP_KERNEL);
+ if(p == 0) {
+ printk(KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
+ psg->sg[i].count,i,psg->count);
+ rcode = -ENOMEM;
+ goto cleanup;
+ }
+ sg_user[i] = (void __user *)(psg->sg[i].addr);
+ sg_list[i] = p; // save so we can clean up later
+ sg_indx = i;
+
+ if( flags & SRB_DataOut ){
+ if(copy_from_user(p,sg_user[i],psg->sg[i].count)){
+ printk(KERN_DEBUG"aacraid: Could not copy sg data from user\n");
+ rcode = -EFAULT;
+ goto cleanup;
+ }
+ }
+ addr = pci_map_single(dev->pdev, p, psg->sg[i].count, data_dir);
+
+ psg->sg[i].addr = cpu_to_le32(addr);
+ psg->sg[i].count = cpu_to_le32(psg->sg[i].count);
+ byte_count += psg->sg[i].count;
+ }
+ srbcmd->count = cpu_to_le32(byte_count);
+ status = fib_send(ScsiPortCommand, srbfib, actual_fibsize, FsaNormal, 1, 1, NULL, NULL);
+ }
+
+ if (status != 0){
+ printk(KERN_DEBUG"aacraid: Could not send raw srb fib to hba\n");
+ rcode = -1;
+ goto cleanup;
+ }
+
+ if( flags & SRB_DataIn ) {
+ for(i = 0 ; i <= sg_indx; i++){
+ if(copy_to_user(sg_user[i],sg_list[i],le32_to_cpu(srbcmd->sg.sg[i].count))){
+ printk(KERN_DEBUG"aacraid: Could not copy sg data to user\n");
+ rcode = -EFAULT;
+ goto cleanup;
+
+ }
+ }
+ }
+
+ reply = (struct aac_srb_reply *) fib_data(srbfib);
+ if(copy_to_user(user_reply,reply,sizeof(struct aac_srb_reply))){
+ printk(KERN_DEBUG"aacraid: Could not copy reply to user\n");
+ rcode = -EFAULT;
+ goto cleanup;
+ }
+
+cleanup:
+ for(i=0; i <= sg_indx; i++){
+ kfree(sg_list[i]);
+ }
+ fib_complete(srbfib);
+ fib_free(srbfib);
+
+ return rcode;
+}
+
+
+struct aac_pci_info {
+ u32 bus;
+ u32 slot;
+};
+
+
+int aac_get_pci_info(struct aac_dev* dev, void __user *arg)
+{
+ struct aac_pci_info pci_info;
+
+ pci_info.bus = dev->pdev->bus->number;
+ pci_info.slot = PCI_SLOT(dev->pdev->devfn);
+
+ if (copy_to_user(arg, &pci_info, sizeof(struct aac_pci_info))) {
+ printk(KERN_DEBUG "aacraid: Could not copy pci info\n");
+ return -EFAULT;
+ }
+ return 0;
+ }
+
+
+int aac_do_ioctl(struct aac_dev * dev, int cmd, void __user *arg)
+{
+ int status;
+
+ /*
+ * HBA gets first crack
+ */
+
+ status = aac_dev_ioctl(dev, cmd, arg);
+ if(status != -ENOTTY)
+ return status;
+
+ switch (cmd) {
+ case FSACTL_MINIPORT_REV_CHECK:
+ status = check_revision(dev, arg);
+ break;
+ case FSACTL_SENDFIB:
+ status = ioctl_send_fib(dev, arg);
+ break;
+ case FSACTL_OPEN_GET_ADAPTER_FIB:
+ status = open_getadapter_fib(dev, arg);
+ break;
+ case FSACTL_GET_NEXT_ADAPTER_FIB:
+ status = next_getadapter_fib(dev, arg);
+ break;
+ case FSACTL_CLOSE_GET_ADAPTER_FIB:
+ status = close_getadapter_fib(dev, arg);
+ break;
+ case FSACTL_SEND_RAW_SRB:
+ status = aac_send_raw_srb(dev,arg);
+ break;
+ case FSACTL_GET_PCI_INFO:
+ status = aac_get_pci_info(dev,arg);
+ break;
+ default:
+ status = -ENOTTY;
+ break;
+ }
+ return status;
+}
+
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
new file mode 100644
index 000000000000..6832a55ca907
--- /dev/null
+++ b/drivers/scsi/aacraid/comminit.c
@@ -0,0 +1,325 @@
+/*
+ * Adaptec AAC series RAID controller driver
+ * (c) Copyright 2001 Red Hat Inc. <alan@redhat.com>
+ *
+ * based on the old aacraid driver that is..
+ * Adaptec aacraid device driver for Linux.
+ *
+ * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Module Name:
+ * comminit.c
+ *
+ * Abstract: This supports the initialization of the host adapter commuication interface.
+ * This is a platform dependent module for the pci cyclone board.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/blkdev.h>
+#include <linux/completion.h>
+#include <linux/mm.h>
+#include <asm/semaphore.h>
+
+#include "aacraid.h"
+
+struct aac_common aac_config;
+
+static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long commsize, unsigned long commalign)
+{
+ unsigned char *base;
+ unsigned long size, align;
+ unsigned long fibsize = 4096;
+ unsigned long printfbufsiz = 256;
+ struct aac_init *init;
+ dma_addr_t phys;
+
+ size = fibsize + sizeof(struct aac_init) + commsize + commalign + printfbufsiz;
+
+
+ base = pci_alloc_consistent(dev->pdev, size, &phys);
+
+ if(base == NULL)
+ {
+ printk(KERN_ERR "aacraid: unable to create mapping.\n");
+ return 0;
+ }
+ dev->comm_addr = (void *)base;
+ dev->comm_phys = phys;
+ dev->comm_size = size;
+
+ dev->init = (struct aac_init *)(base + fibsize);
+ dev->init_pa = phys + fibsize;
+
+ init = dev->init;
+
+ init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION);
+ init->MiniPortRevision = cpu_to_le32(Sa_MINIPORT_REVISION);
+ init->fsrev = cpu_to_le32(dev->fsrev);
+
+ /*
+ * Adapter Fibs are the first thing allocated so that they
+ * start page aligned
+ */
+ dev->aif_base_va = (struct hw_fib *)base;
+
+ init->AdapterFibsVirtualAddress = 0;
+ init->AdapterFibsPhysicalAddress = cpu_to_le32((u32)phys);
+ init->AdapterFibsSize = cpu_to_le32(fibsize);
+ init->AdapterFibAlign = cpu_to_le32(sizeof(struct hw_fib));
+ /*
+ * number of 4k pages of host physical memory. The aacraid fw needs
+ * this number to be less than 4gb worth of pages. num_physpages is in
+ * system page units. New firmware doesn't have any issues with the
+ * mapping system, but older Firmware did, and had *troubles* dealing
+ * with the math overloading past 32 bits, thus we must limit this
+ * field.
+ *
+ * This assumes the memory is mapped zero->n, which isnt
+ * always true on real computers. It also has some slight problems
+ * with the GART on x86-64. I've btw never tried DMA from PCI space
+ * on this platform but don't be suprised if its problematic.
+ */
+#ifndef CONFIG_GART_IOMMU
+ if ((num_physpages << (PAGE_SHIFT - 12)) <= AAC_MAX_HOSTPHYSMEMPAGES) {
+ init->HostPhysMemPages =
+ cpu_to_le32(num_physpages << (PAGE_SHIFT-12));
+ } else
+#endif
+ {
+ init->HostPhysMemPages = cpu_to_le32(AAC_MAX_HOSTPHYSMEMPAGES);
+ }
+
+
+ /*
+ * Increment the base address by the amount already used
+ */
+ base = base + fibsize + sizeof(struct aac_init);
+ phys = (dma_addr_t)((ulong)phys + fibsize + sizeof(struct aac_init));
+ /*
+ * Align the beginning of Headers to commalign
+ */
+ align = (commalign - ((unsigned long)(base) & (commalign - 1)));
+ base = base + align;
+ phys = phys + align;
+ /*
+ * Fill in addresses of the Comm Area Headers and Queues
+ */
+ *commaddr = base;
+ init->CommHeaderAddress = cpu_to_le32((u32)phys);
+ /*
+ * Increment the base address by the size of the CommArea
+ */
+ base = base + commsize;
+ phys = phys + commsize;
+ /*
+ * Place the Printf buffer area after the Fast I/O comm area.
+ */
+ dev->printfbuf = (void *)base;
+ init->printfbuf = cpu_to_le32(phys);
+ init->printfbufsiz = cpu_to_le32(printfbufsiz);
+ memset(base, 0, printfbufsiz);
+ return 1;
+}
+
+static void aac_queue_init(struct aac_dev * dev, struct aac_queue * q, u32 *mem, int qsize)
+{
+ q->numpending = 0;
+ q->dev = dev;
+ INIT_LIST_HEAD(&q->pendingq);
+ init_waitqueue_head(&q->cmdready);
+ INIT_LIST_HEAD(&q->cmdq);
+ init_waitqueue_head(&q->qfull);
+ spin_lock_init(&q->lockdata);
+ q->lock = &q->lockdata;
+ q->headers.producer = mem;
+ q->headers.consumer = mem+1;
+ *(q->headers.producer) = cpu_to_le32(qsize);
+ *(q->headers.consumer) = cpu_to_le32(qsize);
+ q->entries = qsize;
+}
+
+/**
+ * aac_send_shutdown - shutdown an adapter
+ * @dev: Adapter to shutdown
+ *
+ * This routine will send a VM_CloseAll (shutdown) request to the adapter.
+ */
+
+int aac_send_shutdown(struct aac_dev * dev)
+{
+ struct fib * fibctx;
+ struct aac_close *cmd;
+ int status;
+
+ fibctx = fib_alloc(dev);
+ fib_init(fibctx);
+
+ cmd = (struct aac_close *) fib_data(fibctx);
+
+ cmd->command = cpu_to_le32(VM_CloseAll);
+ cmd->cid = cpu_to_le32(0xffffffff);
+
+ status = fib_send(ContainerCommand,
+ fibctx,
+ sizeof(struct aac_close),
+ FsaNormal,
+ 1, 1,
+ NULL, NULL);
+
+ if (status == 0)
+ fib_complete(fibctx);
+ fib_free(fibctx);
+ return status;
+}
+
+/**
+ * aac_comm_init - Initialise FSA data structures
+ * @dev: Adapter to initialise
+ *
+ * Initializes the data structures that are required for the FSA commuication
+ * interface to operate.
+ * Returns
+ * 1 - if we were able to init the commuication interface.
+ * 0 - If there were errors initing. This is a fatal error.
+ */
+
+int aac_comm_init(struct aac_dev * dev)
+{
+ unsigned long hdrsize = (sizeof(u32) * NUMBER_OF_COMM_QUEUES) * 2;
+ unsigned long queuesize = sizeof(struct aac_entry) * TOTAL_QUEUE_ENTRIES;
+ u32 *headers;
+ struct aac_entry * queues;
+ unsigned long size;
+ struct aac_queue_block * comm = dev->queues;
+ /*
+ * Now allocate and initialize the zone structures used as our
+ * pool of FIB context records. The size of the zone is based
+ * on the system memory size. We also initialize the mutex used
+ * to protect the zone.
+ */
+ spin_lock_init(&dev->fib_lock);
+
+ /*
+ * Allocate the physically contigous space for the commuication
+ * queue headers.
+ */
+
+ size = hdrsize + queuesize;
+
+ if (!aac_alloc_comm(dev, (void * *)&headers, size, QUEUE_ALIGNMENT))
+ return -ENOMEM;
+
+ queues = (struct aac_entry *)(((ulong)headers) + hdrsize);
+
+ /* Adapter to Host normal priority Command queue */
+ comm->queue[HostNormCmdQueue].base = queues;
+ aac_queue_init(dev, &comm->queue[HostNormCmdQueue], headers, HOST_NORM_CMD_ENTRIES);
+ queues += HOST_NORM_CMD_ENTRIES;
+ headers += 2;
+
+ /* Adapter to Host high priority command queue */
+ comm->queue[HostHighCmdQueue].base = queues;
+ aac_queue_init(dev, &comm->queue[HostHighCmdQueue], headers, HOST_HIGH_CMD_ENTRIES);
+
+ queues += HOST_HIGH_CMD_ENTRIES;
+ headers +=2;
+
+ /* Host to adapter normal priority command queue */
+ comm->queue[AdapNormCmdQueue].base = queues;
+ aac_queue_init(dev, &comm->queue[AdapNormCmdQueue], headers, ADAP_NORM_CMD_ENTRIES);
+
+ queues += ADAP_NORM_CMD_ENTRIES;
+ headers += 2;
+
+ /* host to adapter high priority command queue */
+ comm->queue[AdapHighCmdQueue].base = queues;
+ aac_queue_init(dev, &comm->queue[AdapHighCmdQueue], headers, ADAP_HIGH_CMD_ENTRIES);
+
+ queues += ADAP_HIGH_CMD_ENTRIES;
+ headers += 2;
+
+ /* adapter to host normal priority response queue */
+ comm->queue[HostNormRespQueue].base = queues;
+ aac_queue_init(dev, &comm->queue[HostNormRespQueue], headers, HOST_NORM_RESP_ENTRIES);
+ queues += HOST_NORM_RESP_ENTRIES;
+ headers += 2;
+
+ /* adapter to host high priority response queue */
+ comm->queue[HostHighRespQueue].base = queues;
+ aac_queue_init(dev, &comm->queue[HostHighRespQueue], headers, HOST_HIGH_RESP_ENTRIES);
+
+ queues += HOST_HIGH_RESP_ENTRIES;
+ headers += 2;
+
+ /* host to adapter normal priority response queue */
+ comm->queue[AdapNormRespQueue].base = queues;
+ aac_queue_init(dev, &comm->queue[AdapNormRespQueue], headers, ADAP_NORM_RESP_ENTRIES);
+
+ queues += ADAP_NORM_RESP_ENTRIES;
+ headers += 2;
+
+ /* host to adapter high priority response queue */
+ comm->queue[AdapHighRespQueue].base = queues;
+ aac_queue_init(dev, &comm->queue[AdapHighRespQueue], headers, ADAP_HIGH_RESP_ENTRIES);
+
+ comm->queue[AdapNormCmdQueue].lock = comm->queue[HostNormRespQueue].lock;
+ comm->queue[AdapHighCmdQueue].lock = comm->queue[HostHighRespQueue].lock;
+ comm->queue[AdapNormRespQueue].lock = comm->queue[HostNormCmdQueue].lock;
+ comm->queue[AdapHighRespQueue].lock = comm->queue[HostHighCmdQueue].lock;
+
+ return 0;
+}
+
+struct aac_dev *aac_init_adapter(struct aac_dev *dev)
+{
+ /*
+ * Ok now init the communication subsystem
+ */
+
+ dev->queues = (struct aac_queue_block *) kmalloc(sizeof(struct aac_queue_block), GFP_KERNEL);
+ if (dev->queues == NULL) {
+ printk(KERN_ERR "Error could not allocate comm region.\n");
+ return NULL;
+ }
+ memset(dev->queues, 0, sizeof(struct aac_queue_block));
+
+ if (aac_comm_init(dev)<0){
+ kfree(dev->queues);
+ return NULL;
+ }
+ /*
+ * Initialize the list of fibs
+ */
+ if(fib_setup(dev)<0){
+ kfree(dev->queues);
+ return NULL;
+ }
+
+ INIT_LIST_HEAD(&dev->fib_list);
+ init_completion(&dev->aif_completion);
+
+ return dev;
+}
+
+
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
new file mode 100644
index 000000000000..3f36dbaa2bb3
--- /dev/null
+++ b/drivers/scsi/aacraid/commsup.c
@@ -0,0 +1,939 @@
+/*
+ * Adaptec AAC series RAID controller driver
+ * (c) Copyright 2001 Red Hat Inc. <alan@redhat.com>
+ *
+ * based on the old aacraid driver that is..
+ * Adaptec aacraid device driver for Linux.
+ *
+ * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Module Name:
+ * commsup.c
+ *
+ * Abstract: Contain all routines that are required for FSA host/adapter
+ * commuication.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/completion.h>
+#include <linux/blkdev.h>
+#include <asm/semaphore.h>
+
+#include "aacraid.h"
+
+/**
+ * fib_map_alloc - allocate the fib objects
+ * @dev: Adapter to allocate for
+ *
+ * Allocate and map the shared PCI space for the FIB blocks used to
+ * talk to the Adaptec firmware.
+ */
+
+static int fib_map_alloc(struct aac_dev *dev)
+{
+ if((dev->hw_fib_va = pci_alloc_consistent(dev->pdev, sizeof(struct hw_fib) * AAC_NUM_FIB, &dev->hw_fib_pa))==NULL)
+ return -ENOMEM;
+ return 0;
+}
+
+/**
+ * fib_map_free - free the fib objects
+ * @dev: Adapter to free
+ *
+ * Free the PCI mappings and the memory allocated for FIB blocks
+ * on this adapter.
+ */
+
+void fib_map_free(struct aac_dev *dev)
+{
+ pci_free_consistent(dev->pdev, sizeof(struct hw_fib) * AAC_NUM_FIB, dev->hw_fib_va, dev->hw_fib_pa);
+}
+
+/**
+ * fib_setup - setup the fibs
+ * @dev: Adapter to set up
+ *
+ * Allocate the PCI space for the fibs, map it and then intialise the
+ * fib area, the unmapped fib data and also the free list
+ */
+
+int fib_setup(struct aac_dev * dev)
+{
+ struct fib *fibptr;
+ struct hw_fib *hw_fib_va;
+ dma_addr_t hw_fib_pa;
+ int i;
+
+ if(fib_map_alloc(dev)<0)
+ return -ENOMEM;
+
+ hw_fib_va = dev->hw_fib_va;
+ hw_fib_pa = dev->hw_fib_pa;
+ memset(hw_fib_va, 0, sizeof(struct hw_fib) * AAC_NUM_FIB);
+ /*
+ * Initialise the fibs
+ */
+ for (i = 0, fibptr = &dev->fibs[i]; i < AAC_NUM_FIB; i++, fibptr++)
+ {
+ fibptr->dev = dev;
+ fibptr->hw_fib = hw_fib_va;
+ fibptr->data = (void *) fibptr->hw_fib->data;
+ fibptr->next = fibptr+1; /* Forward chain the fibs */
+ init_MUTEX_LOCKED(&fibptr->event_wait);
+ spin_lock_init(&fibptr->event_lock);
+ hw_fib_va->header.XferState = 0xffffffff;
+ hw_fib_va->header.SenderSize = cpu_to_le16(sizeof(struct hw_fib));
+ fibptr->hw_fib_pa = hw_fib_pa;
+ hw_fib_va = (struct hw_fib *)((unsigned char *)hw_fib_va + sizeof(struct hw_fib));
+ hw_fib_pa = hw_fib_pa + sizeof(struct hw_fib);
+ }
+ /*
+ * Add the fib chain to the free list
+ */
+ dev->fibs[AAC_NUM_FIB-1].next = NULL;
+ /*
+ * Enable this to debug out of queue space
+ */
+ dev->free_fib = &dev->fibs[0];
+ return 0;
+}
+
+/**
+ * fib_alloc - allocate a fib
+ * @dev: Adapter to allocate the fib for
+ *
+ * Allocate a fib from the adapter fib pool. If the pool is empty we
+ * wait for fibs to become free.
+ */
+
+struct fib * fib_alloc(struct aac_dev *dev)
+{
+ struct fib * fibptr;
+ unsigned long flags;
+ spin_lock_irqsave(&dev->fib_lock, flags);
+ fibptr = dev->free_fib;
+ /* Cannot sleep here or you get hangs. Instead we did the
+ maths at compile time. */
+ if(!fibptr)
+ BUG();
+ dev->free_fib = fibptr->next;
+ spin_unlock_irqrestore(&dev->fib_lock, flags);
+ /*
+ * Set the proper node type code and node byte size
+ */
+ fibptr->type = FSAFS_NTC_FIB_CONTEXT;
+ fibptr->size = sizeof(struct fib);
+ /*
+ * Null out fields that depend on being zero at the start of
+ * each I/O
+ */
+ fibptr->hw_fib->header.XferState = 0;
+ fibptr->callback = NULL;
+ fibptr->callback_data = NULL;
+
+ return fibptr;
+}
+
+/**
+ * fib_free - free a fib
+ * @fibptr: fib to free up
+ *
+ * Frees up a fib and places it on the appropriate queue
+ * (either free or timed out)
+ */
+
+void fib_free(struct fib * fibptr)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&fibptr->dev->fib_lock, flags);
+ if (fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT) {
+ aac_config.fib_timeouts++;
+ fibptr->next = fibptr->dev->timeout_fib;
+ fibptr->dev->timeout_fib = fibptr;
+ } else {
+ if (fibptr->hw_fib->header.XferState != 0) {
+ printk(KERN_WARNING "fib_free, XferState != 0, fibptr = 0x%p, XferState = 0x%x\n",
+ (void*)fibptr,
+ le32_to_cpu(fibptr->hw_fib->header.XferState));
+ }
+ fibptr->next = fibptr->dev->free_fib;
+ fibptr->dev->free_fib = fibptr;
+ }
+ spin_unlock_irqrestore(&fibptr->dev->fib_lock, flags);
+}
+
+/**
+ * fib_init - initialise a fib
+ * @fibptr: The fib to initialize
+ *
+ * Set up the generic fib fields ready for use
+ */
+
+void fib_init(struct fib *fibptr)
+{
+ struct hw_fib *hw_fib = fibptr->hw_fib;
+
+ hw_fib->header.StructType = FIB_MAGIC;
+ hw_fib->header.Size = cpu_to_le16(sizeof(struct hw_fib));
+ hw_fib->header.XferState = cpu_to_le32(HostOwned | FibInitialized | FibEmpty | FastResponseCapable);
+ hw_fib->header.SenderFibAddress = cpu_to_le32(fibptr->hw_fib_pa);
+ hw_fib->header.ReceiverFibAddress = cpu_to_le32(fibptr->hw_fib_pa);
+ hw_fib->header.SenderSize = cpu_to_le16(sizeof(struct hw_fib));
+}
+
+/**
+ * fib_deallocate - deallocate a fib
+ * @fibptr: fib to deallocate
+ *
+ * Will deallocate and return to the free pool the FIB pointed to by the
+ * caller.
+ */
+
+void fib_dealloc(struct fib * fibptr)
+{
+ struct hw_fib *hw_fib = fibptr->hw_fib;
+ if(hw_fib->header.StructType != FIB_MAGIC)
+ BUG();
+ hw_fib->header.XferState = 0;
+}
+
+/*
+ * Commuication primitives define and support the queuing method we use to
+ * support host to adapter commuication. All queue accesses happen through
+ * these routines and are the only routines which have a knowledge of the
+ * how these queues are implemented.
+ */
+
+/**
+ * aac_get_entry - get a queue entry
+ * @dev: Adapter
+ * @qid: Queue Number
+ * @entry: Entry return
+ * @index: Index return
+ * @nonotify: notification control
+ *
+ * With a priority the routine returns a queue entry if the queue has free entries. If the queue
+ * is full(no free entries) than no entry is returned and the function returns 0 otherwise 1 is
+ * returned.
+ */
+
+static int aac_get_entry (struct aac_dev * dev, u32 qid, struct aac_entry **entry, u32 * index, unsigned long *nonotify)
+{
+ struct aac_queue * q;
+
+ /*
+ * All of the queues wrap when they reach the end, so we check
+ * to see if they have reached the end and if they have we just
+ * set the index back to zero. This is a wrap. You could or off
+ * the high bits in all updates but this is a bit faster I think.
+ */
+
+ q = &dev->queues->queue[qid];
+
+ *index = le32_to_cpu(*(q->headers.producer));
+ if ((*index - 2) == le32_to_cpu(*(q->headers.consumer)))
+ *nonotify = 1;
+
+ if (qid == AdapHighCmdQueue) {
+ if (*index >= ADAP_HIGH_CMD_ENTRIES)
+ *index = 0;
+ } else if (qid == AdapNormCmdQueue) {
+ if (*index >= ADAP_NORM_CMD_ENTRIES)
+ *index = 0; /* Wrap to front of the Producer Queue. */
+ }
+ else if (qid == AdapHighRespQueue)
+ {
+ if (*index >= ADAP_HIGH_RESP_ENTRIES)
+ *index = 0;
+ }
+ else if (qid == AdapNormRespQueue)
+ {
+ if (*index >= ADAP_NORM_RESP_ENTRIES)
+ *index = 0; /* Wrap to front of the Producer Queue. */
+ }
+ else {
+ printk("aacraid: invalid qid\n");
+ BUG();
+ }
+
+ if ((*index + 1) == le32_to_cpu(*(q->headers.consumer))) { /* Queue is full */
+ printk(KERN_WARNING "Queue %d full, %d outstanding.\n",
+ qid, q->numpending);
+ return 0;
+ } else {
+ *entry = q->base + *index;
+ return 1;
+ }
+}
+
+/**
+ * aac_queue_get - get the next free QE
+ * @dev: Adapter
+ * @index: Returned index
+ * @priority: Priority of fib
+ * @fib: Fib to associate with the queue entry
+ * @wait: Wait if queue full
+ * @fibptr: Driver fib object to go with fib
+ * @nonotify: Don't notify the adapter
+ *
+ * Gets the next free QE off the requested priorty adapter command
+ * queue and associates the Fib with the QE. The QE represented by
+ * index is ready to insert on the queue when this routine returns
+ * success.
+ */
+
+static int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify)
+{
+ struct aac_entry * entry = NULL;
+ int map = 0;
+ struct aac_queue * q = &dev->queues->queue[qid];
+
+ spin_lock_irqsave(q->lock, q->SavedIrql);
+
+ if (qid == AdapHighCmdQueue || qid == AdapNormCmdQueue)
+ {
+ /* if no entries wait for some if caller wants to */
+ while (!aac_get_entry(dev, qid, &entry, index, nonotify))
+ {
+ printk(KERN_ERR "GetEntries failed\n");
+ }
+ /*
+ * Setup queue entry with a command, status and fib mapped
+ */
+ entry->size = cpu_to_le32(le16_to_cpu(hw_fib->header.Size));
+ map = 1;
+ }
+ else if (qid == AdapHighRespQueue || qid == AdapNormRespQueue)
+ {
+ while(!aac_get_entry(dev, qid, &entry, index, nonotify))
+ {
+ /* if no entries wait for some if caller wants to */
+ }
+ /*
+ * Setup queue entry with command, status and fib mapped
+ */
+ entry->size = cpu_to_le32(le16_to_cpu(hw_fib->header.Size));
+ entry->addr = hw_fib->header.SenderFibAddress;
+ /* Restore adapters pointer to the FIB */
+ hw_fib->header.ReceiverFibAddress = hw_fib->header.SenderFibAddress; /* Let the adapter now where to find its data */
+ map = 0;
+ }
+ /*
+ * If MapFib is true than we need to map the Fib and put pointers
+ * in the queue entry.
+ */
+ if (map)
+ entry->addr = cpu_to_le32(fibptr->hw_fib_pa);
+ return 0;
+}
+
+
+/**
+ * aac_insert_entry - insert a queue entry
+ * @dev: Adapter
+ * @index: Index of entry to insert
+ * @qid: Queue number
+ * @nonotify: Suppress adapter notification
+ *
+ * Gets the next free QE off the requested priorty adapter command
+ * queue and associates the Fib with the QE. The QE represented by
+ * index is ready to insert on the queue when this routine returns
+ * success.
+ */
+
+static int aac_insert_entry(struct aac_dev * dev, u32 index, u32 qid, unsigned long nonotify)
+{
+ struct aac_queue * q = &dev->queues->queue[qid];
+
+ if(q == NULL)
+ BUG();
+ *(q->headers.producer) = cpu_to_le32(index + 1);
+ spin_unlock_irqrestore(q->lock, q->SavedIrql);
+
+ if (qid == AdapHighCmdQueue ||
+ qid == AdapNormCmdQueue ||
+ qid == AdapHighRespQueue ||
+ qid == AdapNormRespQueue)
+ {
+ if (!nonotify)
+ aac_adapter_notify(dev, qid);
+ }
+ else
+ printk("Suprise insert!\n");
+ return 0;
+}
+
+/*
+ * Define the highest level of host to adapter communication routines.
+ * These routines will support host to adapter FS commuication. These
+ * routines have no knowledge of the commuication method used. This level
+ * sends and receives FIBs. This level has no knowledge of how these FIBs
+ * get passed back and forth.
+ */
+
+/**
+ * fib_send - send a fib to the adapter
+ * @command: Command to send
+ * @fibptr: The fib
+ * @size: Size of fib data area
+ * @priority: Priority of Fib
+ * @wait: Async/sync select
+ * @reply: True if a reply is wanted
+ * @callback: Called with reply
+ * @callback_data: Passed to callback
+ *
+ * Sends the requested FIB to the adapter and optionally will wait for a
+ * response FIB. If the caller does not wish to wait for a response than
+ * an event to wait on must be supplied. This event will be set when a
+ * response FIB is received from the adapter.
+ */
+
+int fib_send(u16 command, struct fib * fibptr, unsigned long size, int priority, int wait, int reply, fib_callback callback, void * callback_data)
+{
+ u32 index;
+ u32 qid;
+ struct aac_dev * dev = fibptr->dev;
+ unsigned long nointr = 0;
+ struct hw_fib * hw_fib = fibptr->hw_fib;
+ struct aac_queue * q;
+ unsigned long flags = 0;
+ if (!(hw_fib->header.XferState & cpu_to_le32(HostOwned)))
+ return -EBUSY;
+ /*
+ * There are 5 cases with the wait and reponse requested flags.
+ * The only invalid cases are if the caller requests to wait and
+ * does not request a response and if the caller does not want a
+ * response and the Fib is not allocated from pool. If a response
+ * is not requesed the Fib will just be deallocaed by the DPC
+ * routine when the response comes back from the adapter. No
+ * further processing will be done besides deleting the Fib. We
+ * will have a debug mode where the adapter can notify the host
+ * it had a problem and the host can log that fact.
+ */
+ if (wait && !reply) {
+ return -EINVAL;
+ } else if (!wait && reply) {
+ hw_fib->header.XferState |= cpu_to_le32(Async | ResponseExpected);
+ FIB_COUNTER_INCREMENT(aac_config.AsyncSent);
+ } else if (!wait && !reply) {
+ hw_fib->header.XferState |= cpu_to_le32(NoResponseExpected);
+ FIB_COUNTER_INCREMENT(aac_config.NoResponseSent);
+ } else if (wait && reply) {
+ hw_fib->header.XferState |= cpu_to_le32(ResponseExpected);
+ FIB_COUNTER_INCREMENT(aac_config.NormalSent);
+ }
+ /*
+ * Map the fib into 32bits by using the fib number
+ */
+
+ hw_fib->header.SenderFibAddress = cpu_to_le32(((u32)(fibptr-dev->fibs)) << 1);
+ hw_fib->header.SenderData = (u32)(fibptr - dev->fibs);
+ /*
+ * Set FIB state to indicate where it came from and if we want a
+ * response from the adapter. Also load the command from the
+ * caller.
+ *
+ * Map the hw fib pointer as a 32bit value
+ */
+ hw_fib->header.Command = cpu_to_le16(command);
+ hw_fib->header.XferState |= cpu_to_le32(SentFromHost);
+ fibptr->hw_fib->header.Flags = 0; /* 0 the flags field - internal only*/
+ /*
+ * Set the size of the Fib we want to send to the adapter
+ */
+ hw_fib->header.Size = cpu_to_le16(sizeof(struct aac_fibhdr) + size);
+ if (le16_to_cpu(hw_fib->header.Size) > le16_to_cpu(hw_fib->header.SenderSize)) {
+ return -EMSGSIZE;
+ }
+ /*
+ * Get a queue entry connect the FIB to it and send an notify
+ * the adapter a command is ready.
+ */
+ if (priority == FsaHigh) {
+ hw_fib->header.XferState |= cpu_to_le32(HighPriority);
+ qid = AdapHighCmdQueue;
+ } else {
+ hw_fib->header.XferState |= cpu_to_le32(NormalPriority);
+ qid = AdapNormCmdQueue;
+ }
+ q = &dev->queues->queue[qid];
+
+ if(wait)
+ spin_lock_irqsave(&fibptr->event_lock, flags);
+ if(aac_queue_get( dev, &index, qid, hw_fib, 1, fibptr, &nointr)<0)
+ return -EWOULDBLOCK;
+ dprintk((KERN_DEBUG "fib_send: inserting a queue entry at index %d.\n",index));
+ dprintk((KERN_DEBUG "Fib contents:.\n"));
+ dprintk((KERN_DEBUG " Command = %d.\n", hw_fib->header.Command));
+ dprintk((KERN_DEBUG " XferState = %x.\n", hw_fib->header.XferState));
+ dprintk((KERN_DEBUG " hw_fib va being sent=%p\n",fibptr->hw_fib));
+ dprintk((KERN_DEBUG " hw_fib pa being sent=%lx\n",(ulong)fibptr->hw_fib_pa));
+ dprintk((KERN_DEBUG " fib being sent=%p\n",fibptr));
+ /*
+ * Fill in the Callback and CallbackContext if we are not
+ * going to wait.
+ */
+ if (!wait) {
+ fibptr->callback = callback;
+ fibptr->callback_data = callback_data;
+ }
+ FIB_COUNTER_INCREMENT(aac_config.FibsSent);
+ list_add_tail(&fibptr->queue, &q->pendingq);
+ q->numpending++;
+
+ fibptr->done = 0;
+ fibptr->flags = 0;
+
+ if(aac_insert_entry(dev, index, qid, (nointr & aac_config.irq_mod)) < 0)
+ return -EWOULDBLOCK;
+ /*
+ * If the caller wanted us to wait for response wait now.
+ */
+
+ if (wait) {
+ spin_unlock_irqrestore(&fibptr->event_lock, flags);
+ down(&fibptr->event_wait);
+ if(fibptr->done == 0)
+ BUG();
+
+ if((fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT)){
+ return -ETIMEDOUT;
+ } else {
+ return 0;
+ }
+ }
+ /*
+ * If the user does not want a response than return success otherwise
+ * return pending
+ */
+ if (reply)
+ return -EINPROGRESS;
+ else
+ return 0;
+}
+
+/**
+ * aac_consumer_get - get the top of the queue
+ * @dev: Adapter
+ * @q: Queue
+ * @entry: Return entry
+ *
+ * Will return a pointer to the entry on the top of the queue requested that
+ * we are a consumer of, and return the address of the queue entry. It does
+ * not change the state of the queue.
+ */
+
+int aac_consumer_get(struct aac_dev * dev, struct aac_queue * q, struct aac_entry **entry)
+{
+ u32 index;
+ int status;
+ if (le32_to_cpu(*q->headers.producer) == le32_to_cpu(*q->headers.consumer)) {
+ status = 0;
+ } else {
+ /*
+ * The consumer index must be wrapped if we have reached
+ * the end of the queue, else we just use the entry
+ * pointed to by the header index
+ */
+ if (le32_to_cpu(*q->headers.consumer) >= q->entries)
+ index = 0;
+ else
+ index = le32_to_cpu(*q->headers.consumer);
+ *entry = q->base + index;
+ status = 1;
+ }
+ return(status);
+}
+
+/**
+ * aac_consumer_free - free consumer entry
+ * @dev: Adapter
+ * @q: Queue
+ * @qid: Queue ident
+ *
+ * Frees up the current top of the queue we are a consumer of. If the
+ * queue was full notify the producer that the queue is no longer full.
+ */
+
+void aac_consumer_free(struct aac_dev * dev, struct aac_queue *q, u32 qid)
+{
+ int wasfull = 0;
+ u32 notify;
+
+ if ((le32_to_cpu(*q->headers.producer)+1) == le32_to_cpu(*q->headers.consumer))
+ wasfull = 1;
+
+ if (le32_to_cpu(*q->headers.consumer) >= q->entries)
+ *q->headers.consumer = cpu_to_le32(1);
+ else
+ *q->headers.consumer = cpu_to_le32(le32_to_cpu(*q->headers.consumer)+1);
+
+ if (wasfull) {
+ switch (qid) {
+
+ case HostNormCmdQueue:
+ notify = HostNormCmdNotFull;
+ break;
+ case HostHighCmdQueue:
+ notify = HostHighCmdNotFull;
+ break;
+ case HostNormRespQueue:
+ notify = HostNormRespNotFull;
+ break;
+ case HostHighRespQueue:
+ notify = HostHighRespNotFull;
+ break;
+ default:
+ BUG();
+ return;
+ }
+ aac_adapter_notify(dev, notify);
+ }
+}
+
+/**
+ * fib_adapter_complete - complete adapter issued fib
+ * @fibptr: fib to complete
+ * @size: size of fib
+ *
+ * Will do all necessary work to complete a FIB that was sent from
+ * the adapter.
+ */
+
+int fib_adapter_complete(struct fib * fibptr, unsigned short size)
+{
+ struct hw_fib * hw_fib = fibptr->hw_fib;
+ struct aac_dev * dev = fibptr->dev;
+ unsigned long nointr = 0;
+ if (hw_fib->header.XferState == 0)
+ return 0;
+ /*
+ * If we plan to do anything check the structure type first.
+ */
+ if ( hw_fib->header.StructType != FIB_MAGIC ) {
+ return -EINVAL;
+ }
+ /*
+ * This block handles the case where the adapter had sent us a
+ * command and we have finished processing the command. We
+ * call completeFib when we are done processing the command
+ * and want to send a response back to the adapter. This will
+ * send the completed cdb to the adapter.
+ */
+ if (hw_fib->header.XferState & cpu_to_le32(SentFromAdapter)) {
+ hw_fib->header.XferState |= cpu_to_le32(HostProcessed);
+ if (hw_fib->header.XferState & cpu_to_le32(HighPriority)) {
+ u32 index;
+ if (size)
+ {
+ size += sizeof(struct aac_fibhdr);
+ if (size > le16_to_cpu(hw_fib->header.SenderSize))
+ return -EMSGSIZE;
+ hw_fib->header.Size = cpu_to_le16(size);
+ }
+ if(aac_queue_get(dev, &index, AdapHighRespQueue, hw_fib, 1, NULL, &nointr) < 0) {
+ return -EWOULDBLOCK;
+ }
+ if (aac_insert_entry(dev, index, AdapHighRespQueue, (nointr & (int)aac_config.irq_mod)) != 0) {
+ }
+ }
+ else if (hw_fib->header.XferState & NormalPriority)
+ {
+ u32 index;
+
+ if (size) {
+ size += sizeof(struct aac_fibhdr);
+ if (size > le16_to_cpu(hw_fib->header.SenderSize))
+ return -EMSGSIZE;
+ hw_fib->header.Size = cpu_to_le16(size);
+ }
+ if (aac_queue_get(dev, &index, AdapNormRespQueue, hw_fib, 1, NULL, &nointr) < 0)
+ return -EWOULDBLOCK;
+ if (aac_insert_entry(dev, index, AdapNormRespQueue, (nointr & (int)aac_config.irq_mod)) != 0)
+ {
+ }
+ }
+ }
+ else
+ {
+ printk(KERN_WARNING "fib_adapter_complete: Unknown xferstate detected.\n");
+ BUG();
+ }
+ return 0;
+}
+
+/**
+ * fib_complete - fib completion handler
+ * @fib: FIB to complete
+ *
+ * Will do all necessary work to complete a FIB.
+ */
+
+int fib_complete(struct fib * fibptr)
+{
+ struct hw_fib * hw_fib = fibptr->hw_fib;
+
+ /*
+ * Check for a fib which has already been completed
+ */
+
+ if (hw_fib->header.XferState == 0)
+ return 0;
+ /*
+ * If we plan to do anything check the structure type first.
+ */
+
+ if (hw_fib->header.StructType != FIB_MAGIC)
+ return -EINVAL;
+ /*
+ * This block completes a cdb which orginated on the host and we
+ * just need to deallocate the cdb or reinit it. At this point the
+ * command is complete that we had sent to the adapter and this
+ * cdb could be reused.
+ */
+ if((hw_fib->header.XferState & cpu_to_le32(SentFromHost)) &&
+ (hw_fib->header.XferState & cpu_to_le32(AdapterProcessed)))
+ {
+ fib_dealloc(fibptr);
+ }
+ else if(hw_fib->header.XferState & cpu_to_le32(SentFromHost))
+ {
+ /*
+ * This handles the case when the host has aborted the I/O
+ * to the adapter because the adapter is not responding
+ */
+ fib_dealloc(fibptr);
+ } else if(hw_fib->header.XferState & cpu_to_le32(HostOwned)) {
+ fib_dealloc(fibptr);
+ } else {
+ BUG();
+ }
+ return 0;
+}
+
+/**
+ * aac_printf - handle printf from firmware
+ * @dev: Adapter
+ * @val: Message info
+ *
+ * Print a message passed to us by the controller firmware on the
+ * Adaptec board
+ */
+
+void aac_printf(struct aac_dev *dev, u32 val)
+{
+ int length = val & 0xffff;
+ int level = (val >> 16) & 0xffff;
+ char *cp = dev->printfbuf;
+
+ /*
+ * The size of the printfbuf is set in port.c
+ * There is no variable or define for it
+ */
+ if (length > 255)
+ length = 255;
+ if (cp[length] != 0)
+ cp[length] = 0;
+ if (level == LOG_AAC_HIGH_ERROR)
+ printk(KERN_WARNING "aacraid:%s", cp);
+ else
+ printk(KERN_INFO "aacraid:%s", cp);
+ memset(cp, 0, 256);
+}
+
+/**
+ * aac_command_thread - command processing thread
+ * @dev: Adapter to monitor
+ *
+ * Waits on the commandready event in it's queue. When the event gets set
+ * it will pull FIBs off it's queue. It will continue to pull FIBs off
+ * until the queue is empty. When the queue is empty it will wait for
+ * more FIBs.
+ */
+
+int aac_command_thread(struct aac_dev * dev)
+{
+ struct hw_fib *hw_fib, *hw_newfib;
+ struct fib *fib, *newfib;
+ struct aac_queue_block *queues = dev->queues;
+ struct aac_fib_context *fibctx;
+ unsigned long flags;
+ DECLARE_WAITQUEUE(wait, current);
+
+ /*
+ * We can only have one thread per adapter for AIF's.
+ */
+ if (dev->aif_thread)
+ return -EINVAL;
+ /*
+ * Set up the name that will appear in 'ps'
+ * stored in task_struct.comm[16].
+ */
+ daemonize("aacraid");
+ allow_signal(SIGKILL);
+ /*
+ * Let the DPC know it has a place to send the AIF's to.
+ */
+ dev->aif_thread = 1;
+ add_wait_queue(&queues->queue[HostNormCmdQueue].cmdready, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+ while(1)
+ {
+ spin_lock_irqsave(queues->queue[HostNormCmdQueue].lock, flags);
+ while(!list_empty(&(queues->queue[HostNormCmdQueue].cmdq))) {
+ struct list_head *entry;
+ struct aac_aifcmd * aifcmd;
+
+ set_current_state(TASK_RUNNING);
+
+ entry = queues->queue[HostNormCmdQueue].cmdq.next;
+ list_del(entry);
+
+ spin_unlock_irqrestore(queues->queue[HostNormCmdQueue].lock, flags);
+ fib = list_entry(entry, struct fib, fiblink);
+ /*
+ * We will process the FIB here or pass it to a
+ * worker thread that is TBD. We Really can't
+ * do anything at this point since we don't have
+ * anything defined for this thread to do.
+ */
+ hw_fib = fib->hw_fib;
+ memset(fib, 0, sizeof(struct fib));
+ fib->type = FSAFS_NTC_FIB_CONTEXT;
+ fib->size = sizeof( struct fib );
+ fib->hw_fib = hw_fib;
+ fib->data = hw_fib->data;
+ fib->dev = dev;
+ /*
+ * We only handle AifRequest fibs from the adapter.
+ */
+ aifcmd = (struct aac_aifcmd *) hw_fib->data;
+ if (aifcmd->command == cpu_to_le32(AifCmdDriverNotify)) {
+ /* Handle Driver Notify Events */
+ *(u32 *)hw_fib->data = cpu_to_le32(ST_OK);
+ fib_adapter_complete(fib, sizeof(u32));
+ } else {
+ struct list_head *entry;
+ /* The u32 here is important and intended. We are using
+ 32bit wrapping time to fit the adapter field */
+
+ u32 time_now, time_last;
+ unsigned long flagv;
+
+ time_now = jiffies/HZ;
+
+ spin_lock_irqsave(&dev->fib_lock, flagv);
+ entry = dev->fib_list.next;
+ /*
+ * For each Context that is on the
+ * fibctxList, make a copy of the
+ * fib, and then set the event to wake up the
+ * thread that is waiting for it.
+ */
+ while (entry != &dev->fib_list) {
+ /*
+ * Extract the fibctx
+ */
+ fibctx = list_entry(entry, struct aac_fib_context, next);
+ /*
+ * Check if the queue is getting
+ * backlogged
+ */
+ if (fibctx->count > 20)
+ {
+ /*
+ * It's *not* jiffies folks,
+ * but jiffies / HZ so do not
+ * panic ...
+ */
+ time_last = fibctx->jiffies;
+ /*
+ * Has it been > 2 minutes
+ * since the last read off
+ * the queue?
+ */
+ if ((time_now - time_last) > 120) {
+ entry = entry->next;
+ aac_close_fib_context(dev, fibctx);
+ continue;
+ }
+ }
+ /*
+ * Warning: no sleep allowed while
+ * holding spinlock
+ */
+ hw_newfib = kmalloc(sizeof(struct hw_fib), GFP_ATOMIC);
+ newfib = kmalloc(sizeof(struct fib), GFP_ATOMIC);
+ if (newfib && hw_newfib) {
+ /*
+ * Make the copy of the FIB
+ */
+ memcpy(hw_newfib, hw_fib, sizeof(struct hw_fib));
+ memcpy(newfib, fib, sizeof(struct fib));
+ newfib->hw_fib = hw_newfib;
+ /*
+ * Put the FIB onto the
+ * fibctx's fibs
+ */
+ list_add_tail(&newfib->fiblink, &fibctx->fib_list);
+ fibctx->count++;
+ /*
+ * Set the event to wake up the
+ * thread that will waiting.
+ */
+ up(&fibctx->wait_sem);
+ } else {
+ printk(KERN_WARNING "aifd: didn't allocate NewFib.\n");
+ if(newfib)
+ kfree(newfib);
+ if(hw_newfib)
+ kfree(hw_newfib);
+ }
+ entry = entry->next;
+ }
+ /*
+ * Set the status of this FIB
+ */
+ *(u32 *)hw_fib->data = cpu_to_le32(ST_OK);
+ fib_adapter_complete(fib, sizeof(u32));
+ spin_unlock_irqrestore(&dev->fib_lock, flagv);
+ }
+ spin_lock_irqsave(queues->queue[HostNormCmdQueue].lock, flags);
+ kfree(fib);
+ }
+ /*
+ * There are no more AIF's
+ */
+ spin_unlock_irqrestore(queues->queue[HostNormCmdQueue].lock, flags);
+ schedule();
+
+ if(signal_pending(current))
+ break;
+ set_current_state(TASK_INTERRUPTIBLE);
+ }
+ remove_wait_queue(&queues->queue[HostNormCmdQueue].cmdready, &wait);
+ dev->aif_thread = 0;
+ complete_and_exit(&dev->aif_completion, 0);
+}
diff --git a/drivers/scsi/aacraid/dpcsup.c b/drivers/scsi/aacraid/dpcsup.c
new file mode 100644
index 000000000000..8480b427a6d9
--- /dev/null
+++ b/drivers/scsi/aacraid/dpcsup.c
@@ -0,0 +1,215 @@
+/*
+ * Adaptec AAC series RAID controller driver
+ * (c) Copyright 2001 Red Hat Inc. <alan@redhat.com>
+ *
+ * based on the old aacraid driver that is..
+ * Adaptec aacraid device driver for Linux.
+ *
+ * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Module Name:
+ * dpcsup.c
+ *
+ * Abstract: All DPC processing routines for the cyclone board occur here.
+ *
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/completion.h>
+#include <linux/blkdev.h>
+#include <asm/semaphore.h>
+
+#include "aacraid.h"
+
+/**
+ * aac_response_normal - Handle command replies
+ * @q: Queue to read from
+ *
+ * This DPC routine will be run when the adapter interrupts us to let us
+ * know there is a response on our normal priority queue. We will pull off
+ * all QE there are and wake up all the waiters before exiting. We will
+ * take a spinlock out on the queue before operating on it.
+ */
+
+unsigned int aac_response_normal(struct aac_queue * q)
+{
+ struct aac_dev * dev = q->dev;
+ struct aac_entry *entry;
+ struct hw_fib * hwfib;
+ struct fib * fib;
+ int consumed = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(q->lock, flags);
+ /*
+ * Keep pulling response QEs off the response queue and waking
+ * up the waiters until there are no more QEs. We then return
+ * back to the system. If no response was requesed we just
+ * deallocate the Fib here and continue.
+ */
+ while(aac_consumer_get(dev, q, &entry))
+ {
+ int fast;
+ u32 index = le32_to_cpu(entry->addr);
+ fast = index & 0x01;
+ fib = &dev->fibs[index >> 1];
+ hwfib = fib->hw_fib;
+
+ aac_consumer_free(dev, q, HostNormRespQueue);
+ /*
+ * Remove this fib from the Outstanding I/O queue.
+ * But only if it has not already been timed out.
+ *
+ * If the fib has been timed out already, then just
+ * continue. The caller has already been notified that
+ * the fib timed out.
+ */
+ if (!(fib->flags & FIB_CONTEXT_FLAG_TIMED_OUT)) {
+ list_del(&fib->queue);
+ dev->queues->queue[AdapNormCmdQueue].numpending--;
+ } else {
+ printk(KERN_WARNING "aacraid: FIB timeout (%x).\n", fib->flags);
+ printk(KERN_DEBUG"aacraid: hwfib=%p fib index=%i fib=%p\n",hwfib, hwfib->header.SenderData,fib);
+ continue;
+ }
+ spin_unlock_irqrestore(q->lock, flags);
+
+ if (fast) {
+ /*
+ * Doctor the fib
+ */
+ *(u32 *)hwfib->data = cpu_to_le32(ST_OK);
+ hwfib->header.XferState |= cpu_to_le32(AdapterProcessed);
+ }
+
+ FIB_COUNTER_INCREMENT(aac_config.FibRecved);
+
+ if (hwfib->header.Command == cpu_to_le16(NuFileSystem))
+ {
+ u32 *pstatus = (u32 *)hwfib->data;
+ if (*pstatus & cpu_to_le32(0xffff0000))
+ *pstatus = cpu_to_le32(ST_OK);
+ }
+ if (hwfib->header.XferState & cpu_to_le32(NoResponseExpected | Async))
+ {
+ if (hwfib->header.XferState & cpu_to_le32(NoResponseExpected))
+ FIB_COUNTER_INCREMENT(aac_config.NoResponseRecved);
+ else
+ FIB_COUNTER_INCREMENT(aac_config.AsyncRecved);
+ /*
+ * NOTE: we cannot touch the fib after this
+ * call, because it may have been deallocated.
+ */
+ fib->callback(fib->callback_data, fib);
+ } else {
+ unsigned long flagv;
+ spin_lock_irqsave(&fib->event_lock, flagv);
+ fib->done = 1;
+ up(&fib->event_wait);
+ spin_unlock_irqrestore(&fib->event_lock, flagv);
+ FIB_COUNTER_INCREMENT(aac_config.NormalRecved);
+ }
+ consumed++;
+ spin_lock_irqsave(q->lock, flags);
+ }
+
+ if (consumed > aac_config.peak_fibs)
+ aac_config.peak_fibs = consumed;
+ if (consumed == 0)
+ aac_config.zero_fibs++;
+
+ spin_unlock_irqrestore(q->lock, flags);
+ return 0;
+}
+
+
+/**
+ * aac_command_normal - handle commands
+ * @q: queue to process
+ *
+ * This DPC routine will be queued when the adapter interrupts us to
+ * let us know there is a command on our normal priority queue. We will
+ * pull off all QE there are and wake up all the waiters before exiting.
+ * We will take a spinlock out on the queue before operating on it.
+ */
+
+unsigned int aac_command_normal(struct aac_queue *q)
+{
+ struct aac_dev * dev = q->dev;
+ struct aac_entry *entry;
+ unsigned long flags;
+
+ spin_lock_irqsave(q->lock, flags);
+
+ /*
+ * Keep pulling response QEs off the response queue and waking
+ * up the waiters until there are no more QEs. We then return
+ * back to the system.
+ */
+ while(aac_consumer_get(dev, q, &entry))
+ {
+ struct fib fibctx;
+ struct hw_fib * hw_fib;
+ u32 index;
+ struct fib *fib = &fibctx;
+
+ index = le32_to_cpu(entry->addr) / sizeof(struct hw_fib);
+ hw_fib = &dev->aif_base_va[index];
+
+ /*
+ * Allocate a FIB at all costs. For non queued stuff
+ * we can just use the stack so we are happy. We need
+ * a fib object in order to manage the linked lists
+ */
+ if (dev->aif_thread)
+ if((fib = kmalloc(sizeof(struct fib), GFP_ATOMIC)) == NULL)
+ fib = &fibctx;
+
+ memset(fib, 0, sizeof(struct fib));
+ INIT_LIST_HEAD(&fib->fiblink);
+ fib->type = FSAFS_NTC_FIB_CONTEXT;
+ fib->size = sizeof(struct fib);
+ fib->hw_fib = hw_fib;
+ fib->data = hw_fib->data;
+ fib->dev = dev;
+
+
+ if (dev->aif_thread && fib != &fibctx) {
+ list_add_tail(&fib->fiblink, &q->cmdq);
+ aac_consumer_free(dev, q, HostNormCmdQueue);
+ wake_up_interruptible(&q->cmdready);
+ } else {
+ aac_consumer_free(dev, q, HostNormCmdQueue);
+ spin_unlock_irqrestore(q->lock, flags);
+ /*
+ * Set the status of this FIB
+ */
+ *(u32 *)hw_fib->data = cpu_to_le32(ST_OK);
+ fib_adapter_complete(fib, sizeof(u32));
+ spin_lock_irqsave(q->lock, flags);
+ }
+ }
+ spin_unlock_irqrestore(q->lock, flags);
+ return 0;
+}
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
new file mode 100644
index 000000000000..c9b82687ba1a
--- /dev/null
+++ b/drivers/scsi/aacraid/linit.c
@@ -0,0 +1,749 @@
+/*
+ * Adaptec AAC series RAID controller driver
+ * (c) Copyright 2001 Red Hat Inc. <alan@redhat.com>
+ *
+ * based on the old aacraid driver that is..
+ * Adaptec aacraid device driver for Linux.
+ *
+ * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Module Name:
+ * linit.c
+ *
+ * Abstract: Linux Driver entry module for Adaptec RAID Array Controller
+ */
+
+#define AAC_DRIVER_VERSION "1.1.2-lk2"
+#define AAC_DRIVER_BUILD_DATE __DATE__
+#define AAC_DRIVERNAME "aacraid"
+
+#include <linux/compat.h>
+#include <linux/blkdev.h>
+#include <linux/completion.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/syscalls.h>
+#include <linux/ioctl32.h>
+#include <linux/delay.h>
+#include <linux/smp_lock.h>
+#include <asm/semaphore.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsicam.h>
+#include <scsi/scsi_eh.h>
+
+#include "aacraid.h"
+
+
+MODULE_AUTHOR("Red Hat Inc and Adaptec");
+MODULE_DESCRIPTION("Dell PERC2, 2/Si, 3/Si, 3/Di, "
+ "Adaptec Advanced Raid Products, "
+ "and HP NetRAID-4M SCSI driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(AAC_DRIVER_VERSION);
+
+static LIST_HEAD(aac_devices);
+static int aac_cfg_major = -1;
+
+/*
+ * Because of the way Linux names scsi devices, the order in this table has
+ * become important. Check for on-board Raid first, add-in cards second.
+ *
+ * Note: The last field is used to index into aac_drivers below.
+ */
+static struct pci_device_id aac_pci_tbl[] = {
+ { 0x1028, 0x0001, 0x1028, 0x0001, 0, 0, 0 }, /* PERC 2/Si (Iguana/PERC2Si) */
+ { 0x1028, 0x0002, 0x1028, 0x0002, 0, 0, 1 }, /* PERC 3/Di (Opal/PERC3Di) */
+ { 0x1028, 0x0003, 0x1028, 0x0003, 0, 0, 2 }, /* PERC 3/Si (SlimFast/PERC3Si */
+ { 0x1028, 0x0004, 0x1028, 0x00d0, 0, 0, 3 }, /* PERC 3/Di (Iguana FlipChip/PERC3DiF */
+ { 0x1028, 0x0002, 0x1028, 0x00d1, 0, 0, 4 }, /* PERC 3/Di (Viper/PERC3DiV) */
+ { 0x1028, 0x0002, 0x1028, 0x00d9, 0, 0, 5 }, /* PERC 3/Di (Lexus/PERC3DiL) */
+ { 0x1028, 0x000a, 0x1028, 0x0106, 0, 0, 6 }, /* PERC 3/Di (Jaguar/PERC3DiJ) */
+ { 0x1028, 0x000a, 0x1028, 0x011b, 0, 0, 7 }, /* PERC 3/Di (Dagger/PERC3DiD) */
+ { 0x1028, 0x000a, 0x1028, 0x0121, 0, 0, 8 }, /* PERC 3/Di (Boxster/PERC3DiB) */
+ { 0x9005, 0x0283, 0x9005, 0x0283, 0, 0, 9 }, /* catapult */
+ { 0x9005, 0x0284, 0x9005, 0x0284, 0, 0, 10 }, /* tomcat */
+ { 0x9005, 0x0285, 0x9005, 0x0286, 0, 0, 11 }, /* Adaptec 2120S (Crusader) */
+ { 0x9005, 0x0285, 0x9005, 0x0285, 0, 0, 12 }, /* Adaptec 2200S (Vulcan) */
+ { 0x9005, 0x0285, 0x9005, 0x0287, 0, 0, 13 }, /* Adaptec 2200S (Vulcan-2m) */
+ { 0x9005, 0x0285, 0x17aa, 0x0286, 0, 0, 14 }, /* Legend S220 (Legend Crusader) */
+ { 0x9005, 0x0285, 0x17aa, 0x0287, 0, 0, 15 }, /* Legend S230 (Legend Vulcan) */
+
+ { 0x9005, 0x0285, 0x9005, 0x0288, 0, 0, 16 }, /* Adaptec 3230S (Harrier) */
+ { 0x9005, 0x0285, 0x9005, 0x0289, 0, 0, 17 }, /* Adaptec 3240S (Tornado) */
+ { 0x9005, 0x0285, 0x9005, 0x028a, 0, 0, 18 }, /* ASR-2020ZCR SCSI PCI-X ZCR (Skyhawk) */
+ { 0x9005, 0x0285, 0x9005, 0x028b, 0, 0, 19 }, /* ASR-2025ZCR SCSI SO-DIMM PCI-X ZCR (Terminator) */
+ { 0x9005, 0x0286, 0x9005, 0x028c, 0, 0, 20 }, /* ASR-2230S + ASR-2230SLP PCI-X (Lancer) */
+ { 0x9005, 0x0286, 0x9005, 0x028d, 0, 0, 21 }, /* ASR-2130S (Lancer) */
+ { 0x9005, 0x0286, 0x9005, 0x029b, 0, 0, 22 }, /* AAR-2820SA (Intruder) */
+ { 0x9005, 0x0286, 0x9005, 0x029c, 0, 0, 23 }, /* AAR-2620SA (Intruder) */
+ { 0x9005, 0x0286, 0x9005, 0x029d, 0, 0, 24 }, /* AAR-2420SA (Intruder) */
+ { 0x9005, 0x0286, 0x9005, 0x0800, 0, 0, 25 }, /* Callisto Jupiter Platform */
+ { 0x9005, 0x0285, 0x9005, 0x028e, 0, 0, 26 }, /* ASR-2020SA SATA PCI-X ZCR (Skyhawk) */
+ { 0x9005, 0x0285, 0x9005, 0x028f, 0, 0, 27 }, /* ASR-2025SA SATA SO-DIMM PCI-X ZCR (Terminator) */
+ { 0x9005, 0x0285, 0x9005, 0x0290, 0, 0, 28 }, /* AAR-2410SA PCI SATA 4ch (Jaguar II) */
+ { 0x9005, 0x0285, 0x1028, 0x0291, 0, 0, 29 }, /* CERC SATA RAID 2 PCI SATA 6ch (DellCorsair) */
+ { 0x9005, 0x0285, 0x9005, 0x0292, 0, 0, 30 }, /* AAR-2810SA PCI SATA 8ch (Corsair-8) */
+ { 0x9005, 0x0285, 0x9005, 0x0293, 0, 0, 31 }, /* AAR-21610SA PCI SATA 16ch (Corsair-16) */
+ { 0x9005, 0x0285, 0x9005, 0x0294, 0, 0, 32 }, /* ESD SO-DIMM PCI-X SATA ZCR (Prowler) */
+ { 0x9005, 0x0285, 0x103C, 0x3227, 0, 0, 33 }, /* AAR-2610SA PCI SATA 6ch */
+ { 0x9005, 0x0285, 0x9005, 0x0296, 0, 0, 34 }, /* ASR-2240S (SabreExpress) */
+ { 0x9005, 0x0285, 0x9005, 0x0297, 0, 0, 35 }, /* ASR-4005SAS */
+ { 0x9005, 0x0285, 0x1014, 0x02F2, 0, 0, 36 }, /* IBM 8i (AvonPark) */
+ { 0x9005, 0x0285, 0x9005, 0x0298, 0, 0, 37 }, /* ASR-4000SAS (BlackBird) */
+ { 0x9005, 0x0285, 0x9005, 0x0299, 0, 0, 38 }, /* ASR-4800SAS (Marauder-X) */
+ { 0x9005, 0x0285, 0x9005, 0x029A, 0, 0, 39 }, /* ASR-4805SAS (Marauder-E) */
+
+ { 0x9005, 0x0285, 0x1028, 0x0287, 0, 0, 40 }, /* Perc 320/DC*/
+ { 0x1011, 0x0046, 0x9005, 0x0365, 0, 0, 41 }, /* Adaptec 5400S (Mustang)*/
+ { 0x1011, 0x0046, 0x9005, 0x0364, 0, 0, 42 }, /* Adaptec 5400S (Mustang)*/
+ { 0x1011, 0x0046, 0x9005, 0x1364, 0, 0, 43 }, /* Dell PERC2/QC */
+ { 0x1011, 0x0046, 0x103c, 0x10c2, 0, 0, 44 }, /* HP NetRAID-4M */
+
+ { 0x9005, 0x0285, 0x1028, PCI_ANY_ID, 0, 0, 45 }, /* Dell Catchall */
+ { 0x9005, 0x0285, 0x17aa, PCI_ANY_ID, 0, 0, 46 }, /* Legend Catchall */
+ { 0x9005, 0x0285, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 47 }, /* Adaptec Catch All */
+ { 0x9005, 0x0286, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 48 }, /* Adaptec Rocket Catch All */
+ { 0,}
+};
+MODULE_DEVICE_TABLE(pci, aac_pci_tbl);
+
+/*
+ * dmb - For now we add the number of channels to this structure.
+ * In the future we should add a fib that reports the number of channels
+ * for the card. At that time we can remove the channels from here
+ */
+static struct aac_driver_ident aac_drivers[] = {
+ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 2/Si (Iguana/PERC2Si) */
+ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Opal/PERC3Di) */
+ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Si (SlimFast/PERC3Si */
+ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Iguana FlipChip/PERC3DiF */
+ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Viper/PERC3DiV) */
+ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Lexus/PERC3DiL) */
+ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Jaguar/PERC3DiJ) */
+ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Dagger/PERC3DiD) */
+ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Boxster/PERC3DiB) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "catapult ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* catapult */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "tomcat ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* tomcat */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2120S (Crusader) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2200S (Vulcan) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2200S (Vulcan-2m) */
+ { aac_rx_init, "aacraid", "Legend ", "Legend S220 ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Legend S220 (Legend Crusader) */
+ { aac_rx_init, "aacraid", "Legend ", "Legend S230 ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Legend S230 (Legend Vulcan) */
+
+ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 3230S ", 2 }, /* Adaptec 3230S (Harrier) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 3240S ", 2 }, /* Adaptec 3240S (Tornado) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2020ZCR ", 2 }, /* ASR-2020ZCR SCSI PCI-X ZCR (Skyhawk) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2025ZCR ", 2 }, /* ASR-2025ZCR SCSI SO-DIMM PCI-X ZCR (Terminator) */
+ { aac_rkt_init, "aacraid", "ADAPTEC ", "ASR-2230S PCI-X ", 2 }, /* ASR-2230S + ASR-2230SLP PCI-X (Lancer) */
+ { aac_rkt_init, "aacraid", "ADAPTEC ", "ASR-2130S PCI-X ", 1 }, /* ASR-2130S (Lancer) */
+ { aac_rkt_init, "aacraid", "ADAPTEC ", "AAR-2820SA ", 1 }, /* AAR-2820SA (Intruder) */
+ { aac_rkt_init, "aacraid", "ADAPTEC ", "AAR-2620SA ", 1 }, /* AAR-2620SA (Intruder) */
+ { aac_rkt_init, "aacraid", "ADAPTEC ", "AAR-2420SA ", 1 }, /* AAR-2420SA (Intruder) */
+ { aac_rkt_init, "aacraid", "ADAPTEC ", "Callisto ", 2, AAC_QUIRK_MASTER }, /* Jupiter Platform */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2020SA ", 1 }, /* ASR-2020SA SATA PCI-X ZCR (Skyhawk) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2025SA ", 1 }, /* ASR-2025SA SATA SO-DIMM PCI-X ZCR (Terminator) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "AAR-2410SA SATA ", 1 }, /* AAR-2410SA PCI SATA 4ch (Jaguar II) */
+ { aac_rx_init, "aacraid", "DELL ", "CERC SR2 ", 1 }, /* CERC SATA RAID 2 PCI SATA 6ch (DellCorsair) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "AAR-2810SA SATA ", 1 }, /* AAR-2810SA PCI SATA 8ch (Corsair-8) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "AAR-21610SA SATA", 1 }, /* AAR-21610SA PCI SATA 16ch (Corsair-16) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2026ZCR ", 1 }, /* ESD SO-DIMM PCI-X SATA ZCR (Prowler) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "AAR-2610SA ", 1 }, /* SATA 6Ch (Bearcat) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2240S ", 1 }, /* ASR-2240S (SabreExpress) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4005SAS ", 1 }, /* ASR-4005SAS */
+ { aac_rx_init, "aacraid", "IBM ", "ServeRAID 8i ", 1 }, /* IBM 8i (AvonPark) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4000SAS ", 1 }, /* ASR-4000SAS (BlackBird & AvonPark) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4800SAS ", 1 }, /* ASR-4800SAS (Marauder-X) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4805SAS ", 1 }, /* ASR-4805SAS (Marauder-E) */
+
+ { aac_rx_init, "percraid", "DELL ", "PERC 320/DC ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Perc 320/DC*/
+ { aac_sa_init, "aacraid", "ADAPTEC ", "Adaptec 5400S ", 4, AAC_QUIRK_34SG }, /* Adaptec 5400S (Mustang)*/
+ { aac_sa_init, "aacraid", "ADAPTEC ", "AAC-364 ", 4, AAC_QUIRK_34SG }, /* Adaptec 5400S (Mustang)*/
+ { aac_sa_init, "percraid", "DELL ", "PERCRAID ", 4, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Dell PERC2/QC */
+ { aac_sa_init, "hpnraid", "HP ", "NetRAID ", 4, AAC_QUIRK_34SG }, /* HP NetRAID-4M */
+
+ { aac_rx_init, "aacraid", "DELL ", "RAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Dell Catchall */
+ { aac_rx_init, "aacraid", "Legend ", "RAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Legend Catchall */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec Catch All */
+ { aac_rkt_init, "aacraid", "ADAPTEC ", "RAID ", 2 } /* Adaptec Rocket Catch All */
+};
+
+/**
+ * aac_queuecommand - queue a SCSI command
+ * @cmd: SCSI command to queue
+ * @done: Function to call on command completion
+ *
+ * Queues a command for execution by the associated Host Adapter.
+ *
+ * TODO: unify with aac_scsi_cmd().
+ */
+
+static int aac_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+{
+ cmd->scsi_done = done;
+ return (aac_scsi_cmd(cmd) ? FAILED : 0);
+}
+
+/**
+ * aac_info - Returns the host adapter name
+ * @shost: Scsi host to report on
+ *
+ * Returns a static string describing the device in question
+ */
+
+const char *aac_info(struct Scsi_Host *shost)
+{
+ struct aac_dev *dev = (struct aac_dev *)shost->hostdata;
+ return aac_drivers[dev->cardtype].name;
+}
+
+/**
+ * aac_get_driver_ident
+ * @devtype: index into lookup table
+ *
+ * Returns a pointer to the entry in the driver lookup table.
+ */
+
+struct aac_driver_ident* aac_get_driver_ident(int devtype)
+{
+ return &aac_drivers[devtype];
+}
+
+/**
+ * aac_biosparm - return BIOS parameters for disk
+ * @sdev: The scsi device corresponding to the disk
+ * @bdev: the block device corresponding to the disk
+ * @capacity: the sector capacity of the disk
+ * @geom: geometry block to fill in
+ *
+ * Return the Heads/Sectors/Cylinders BIOS Disk Parameters for Disk.
+ * The default disk geometry is 64 heads, 32 sectors, and the appropriate
+ * number of cylinders so as not to exceed drive capacity. In order for
+ * disks equal to or larger than 1 GB to be addressable by the BIOS
+ * without exceeding the BIOS limitation of 1024 cylinders, Extended
+ * Translation should be enabled. With Extended Translation enabled,
+ * drives between 1 GB inclusive and 2 GB exclusive are given a disk
+ * geometry of 128 heads and 32 sectors, and drives above 2 GB inclusive
+ * are given a disk geometry of 255 heads and 63 sectors. However, if
+ * the BIOS detects that the Extended Translation setting does not match
+ * the geometry in the partition table, then the translation inferred
+ * from the partition table will be used by the BIOS, and a warning may
+ * be displayed.
+ */
+
+static int aac_biosparm(struct scsi_device *sdev, struct block_device *bdev,
+ sector_t capacity, int *geom)
+{
+ struct diskparm *param = (struct diskparm *)geom;
+ unsigned char *buf;
+
+ dprintk((KERN_DEBUG "aac_biosparm.\n"));
+
+ /*
+ * Assuming extended translation is enabled - #REVISIT#
+ */
+ if (capacity >= 2 * 1024 * 1024) { /* 1 GB in 512 byte sectors */
+ if(capacity >= 4 * 1024 * 1024) { /* 2 GB in 512 byte sectors */
+ param->heads = 255;
+ param->sectors = 63;
+ } else {
+ param->heads = 128;
+ param->sectors = 32;
+ }
+ } else {
+ param->heads = 64;
+ param->sectors = 32;
+ }
+
+ param->cylinders = cap_to_cyls(capacity, param->heads * param->sectors);
+
+ /*
+ * Read the first 1024 bytes from the disk device, if the boot
+ * sector partition table is valid, search for a partition table
+ * entry whose end_head matches one of the standard geometry
+ * translations ( 64/32, 128/32, 255/63 ).
+ */
+ buf = scsi_bios_ptable(bdev);
+ if(*(unsigned short *)(buf + 0x40) == cpu_to_le16(0xaa55)) {
+ struct partition *first = (struct partition * )buf;
+ struct partition *entry = first;
+ int saved_cylinders = param->cylinders;
+ int num;
+ unsigned char end_head, end_sec;
+
+ for(num = 0; num < 4; num++) {
+ end_head = entry->end_head;
+ end_sec = entry->end_sector & 0x3f;
+
+ if(end_head == 63) {
+ param->heads = 64;
+ param->sectors = 32;
+ break;
+ } else if(end_head == 127) {
+ param->heads = 128;
+ param->sectors = 32;
+ break;
+ } else if(end_head == 254) {
+ param->heads = 255;
+ param->sectors = 63;
+ break;
+ }
+ entry++;
+ }
+
+ if (num == 4) {
+ end_head = first->end_head;
+ end_sec = first->end_sector & 0x3f;
+ }
+
+ param->cylinders = cap_to_cyls(capacity, param->heads * param->sectors);
+ if (num < 4 && end_sec == param->sectors) {
+ if (param->cylinders != saved_cylinders)
+ dprintk((KERN_DEBUG "Adopting geometry: heads=%d, sectors=%d from partition table %d.\n",
+ param->heads, param->sectors, num));
+ } else if (end_head > 0 || end_sec > 0) {
+ dprintk((KERN_DEBUG "Strange geometry: heads=%d, sectors=%d in partition table %d.\n",
+ end_head + 1, end_sec, num));
+ dprintk((KERN_DEBUG "Using geometry: heads=%d, sectors=%d.\n",
+ param->heads, param->sectors));
+ }
+ }
+ kfree(buf);
+ return 0;
+}
+
+/**
+ * aac_slave_configure - compute queue depths
+ * @sdev: SCSI device we are considering
+ *
+ * Selects queue depths for each target device based on the host adapter's
+ * total capacity and the queue depth supported by the target device.
+ * A queue depth of one automatically disables tagged queueing.
+ */
+
+static int aac_slave_configure(struct scsi_device *sdev)
+{
+ if (sdev->tagged_supported)
+ scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, 128);
+ else
+ scsi_adjust_queue_depth(sdev, 0, 1);
+ return 0;
+}
+
+static int aac_ioctl(struct scsi_device *sdev, int cmd, void __user * arg)
+{
+ struct aac_dev *dev = (struct aac_dev *)sdev->host->hostdata;
+ return aac_do_ioctl(dev, cmd, arg);
+}
+
+/*
+ * XXX: does aac really need no error handling??
+ */
+static int aac_eh_abort(struct scsi_cmnd *cmd)
+{
+ return FAILED;
+}
+
+/*
+ * aac_eh_reset - Reset command handling
+ * @scsi_cmd: SCSI command block causing the reset
+ *
+ */
+static int aac_eh_reset(struct scsi_cmnd* cmd)
+{
+ struct scsi_device * dev = cmd->device;
+ struct Scsi_Host * host = dev->host;
+ struct scsi_cmnd * command;
+ int count;
+ struct aac_dev * aac;
+ unsigned long flags;
+
+ printk(KERN_ERR "%s: Host adapter reset request. SCSI hang ?\n",
+ AAC_DRIVERNAME);
+
+
+ aac = (struct aac_dev *)host->hostdata;
+ if (aac_adapter_check_health(aac)) {
+ printk(KERN_ERR "%s: Host adapter appears dead\n",
+ AAC_DRIVERNAME);
+ return -ENODEV;
+ }
+ /*
+ * Wait for all commands to complete to this specific
+ * target (block maximum 60 seconds).
+ */
+ for (count = 60; count; --count) {
+ int active = 0;
+ __shost_for_each_device(dev, host) {
+ spin_lock_irqsave(&dev->list_lock, flags);
+ list_for_each_entry(command, &dev->cmd_list, list) {
+ if (command->serial_number) {
+ active++;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&dev->list_lock, flags);
+ if (active)
+ break;
+
+ }
+ /*
+ * We can exit If all the commands are complete
+ */
+ if (active == 0)
+ return SUCCESS;
+ spin_unlock_irq(host->host_lock);
+ ssleep(1);
+ spin_lock_irq(host->host_lock);
+ }
+ printk(KERN_ERR "%s: SCSI bus appears hung\n", AAC_DRIVERNAME);
+ return -ETIMEDOUT;
+}
+
+/**
+ * aac_cfg_open - open a configuration file
+ * @inode: inode being opened
+ * @file: file handle attached
+ *
+ * Called when the configuration device is opened. Does the needed
+ * set up on the handle and then returns
+ *
+ * Bugs: This needs extending to check a given adapter is present
+ * so we can support hot plugging, and to ref count adapters.
+ */
+
+static int aac_cfg_open(struct inode *inode, struct file *file)
+{
+ struct aac_dev *aac;
+ unsigned minor = iminor(inode);
+ int err = -ENODEV;
+
+ list_for_each_entry(aac, &aac_devices, entry) {
+ if (aac->id == minor) {
+ file->private_data = aac;
+ err = 0;
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * aac_cfg_ioctl - AAC configuration request
+ * @inode: inode of device
+ * @file: file handle
+ * @cmd: ioctl command code
+ * @arg: argument
+ *
+ * Handles a configuration ioctl. Currently this involves wrapping it
+ * up and feeding it into the nasty windowsalike glue layer.
+ *
+ * Bugs: Needs locking against parallel ioctls lower down
+ * Bugs: Needs to handle hot plugging
+ */
+
+static int aac_cfg_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ return aac_do_ioctl(file->private_data, cmd, (void __user *)arg);
+}
+
+#ifdef CONFIG_COMPAT
+static long aac_compat_do_ioctl(struct aac_dev *dev, unsigned cmd, unsigned long arg)
+{
+ long ret;
+ lock_kernel();
+ switch (cmd) {
+ case FSACTL_MINIPORT_REV_CHECK:
+ case FSACTL_SENDFIB:
+ case FSACTL_OPEN_GET_ADAPTER_FIB:
+ case FSACTL_CLOSE_GET_ADAPTER_FIB:
+ case FSACTL_SEND_RAW_SRB:
+ case FSACTL_GET_PCI_INFO:
+ case FSACTL_QUERY_DISK:
+ case FSACTL_DELETE_DISK:
+ case FSACTL_FORCE_DELETE_DISK:
+ case FSACTL_GET_CONTAINERS:
+ ret = aac_do_ioctl(dev, cmd, (void __user *)arg);
+ break;
+
+ case FSACTL_GET_NEXT_ADAPTER_FIB: {
+ struct fib_ioctl __user *f;
+
+ f = compat_alloc_user_space(sizeof(*f));
+ ret = 0;
+ if (clear_user(f, sizeof(*f) != sizeof(*f)))
+ ret = -EFAULT;
+ if (copy_in_user(f, (void __user *)arg, sizeof(struct fib_ioctl) - sizeof(u32)))
+ ret = -EFAULT;
+ if (!ret)
+ ret = aac_do_ioctl(dev, cmd, (void __user *)arg);
+ break;
+ }
+
+ default:
+ ret = -ENOIOCTLCMD;
+ break;
+ }
+ unlock_kernel();
+ return ret;
+}
+
+static int aac_compat_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
+{
+ struct aac_dev *dev = (struct aac_dev *)sdev->host->hostdata;
+ return aac_compat_do_ioctl(dev, cmd, (unsigned long)arg);
+}
+
+static long aac_compat_cfg_ioctl(struct file *file, unsigned cmd, unsigned long arg)
+{
+ return aac_compat_do_ioctl((struct aac_dev *)file->private_data, cmd, arg);
+}
+#endif
+
+static struct file_operations aac_cfg_fops = {
+ .owner = THIS_MODULE,
+ .ioctl = aac_cfg_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = aac_compat_cfg_ioctl,
+#endif
+ .open = aac_cfg_open,
+};
+
+static struct scsi_host_template aac_driver_template = {
+ .module = THIS_MODULE,
+ .name = "AAC",
+ .proc_name = "aacraid",
+ .info = aac_info,
+ .ioctl = aac_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = aac_compat_ioctl,
+#endif
+ .queuecommand = aac_queuecommand,
+ .bios_param = aac_biosparm,
+ .slave_configure = aac_slave_configure,
+ .eh_abort_handler = aac_eh_abort,
+ .eh_host_reset_handler = aac_eh_reset,
+ .can_queue = AAC_NUM_IO_FIB,
+ .this_id = 16,
+ .sg_tablesize = 16,
+ .max_sectors = 128,
+#if (AAC_NUM_IO_FIB > 256)
+ .cmd_per_lun = 256,
+#else
+ .cmd_per_lun = AAC_NUM_IO_FIB,
+#endif
+ .use_clustering = ENABLE_CLUSTERING,
+};
+
+
+static int __devinit aac_probe_one(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ unsigned index = id->driver_data;
+ struct Scsi_Host *shost;
+ struct aac_dev *aac;
+ struct list_head *insert = &aac_devices;
+ int error = -ENODEV;
+ int unique_id = 0;
+
+ list_for_each_entry(aac, &aac_devices, entry) {
+ if (aac->id > unique_id)
+ break;
+ insert = &aac->entry;
+ unique_id++;
+ }
+
+ if (pci_enable_device(pdev))
+ goto out;
+
+ if (pci_set_dma_mask(pdev, 0xFFFFFFFFULL) ||
+ pci_set_consistent_dma_mask(pdev, 0xFFFFFFFFULL))
+ goto out;
+ /*
+ * If the quirk31 bit is set, the adapter needs adapter
+ * to driver communication memory to be allocated below 2gig
+ */
+ if (aac_drivers[index].quirks & AAC_QUIRK_31BIT)
+ if (pci_set_dma_mask(pdev, 0x7FFFFFFFULL) ||
+ pci_set_consistent_dma_mask(pdev, 0x7FFFFFFFULL))
+ goto out;
+
+ pci_set_master(pdev);
+
+ shost = scsi_host_alloc(&aac_driver_template, sizeof(struct aac_dev));
+ if (!shost)
+ goto out_disable_pdev;
+
+ shost->irq = pdev->irq;
+ shost->base = pci_resource_start(pdev, 0);
+ shost->unique_id = unique_id;
+
+ aac = (struct aac_dev *)shost->hostdata;
+ aac->scsi_host_ptr = shost;
+ aac->pdev = pdev;
+ aac->name = aac_driver_template.name;
+ aac->id = shost->unique_id;
+ aac->cardtype = index;
+ INIT_LIST_HEAD(&aac->entry);
+
+ aac->fibs = kmalloc(sizeof(struct fib) * AAC_NUM_FIB, GFP_KERNEL);
+ if (!aac->fibs)
+ goto out_free_host;
+ spin_lock_init(&aac->fib_lock);
+
+ if ((*aac_drivers[index].init)(aac))
+ goto out_free_fibs;
+
+ /*
+ * If we had set a smaller DMA mask earlier, set it to 4gig
+ * now since the adapter can dma data to at least a 4gig
+ * address space.
+ */
+ if (aac_drivers[index].quirks & AAC_QUIRK_31BIT)
+ if (pci_set_dma_mask(pdev, 0xFFFFFFFFULL))
+ goto out_free_fibs;
+
+ aac_get_adapter_info(aac);
+
+ /*
+ * max channel will be the physical channels plus 1 virtual channel
+ * all containers are on the virtual channel 0
+ * physical channels are address by their actual physical number+1
+ */
+ if (aac->nondasd_support == 1)
+ shost->max_channel = aac_drivers[index].channels+1;
+ else
+ shost->max_channel = 1;
+
+ aac_get_config_status(aac);
+ aac_get_containers(aac);
+ list_add(&aac->entry, insert);
+
+ shost->max_id = aac->maximum_num_containers;
+ if (shost->max_id < MAXIMUM_NUM_CONTAINERS)
+ shost->max_id = MAXIMUM_NUM_CONTAINERS;
+ else
+ shost->this_id = shost->max_id;
+
+ /*
+ * dmb - we may need to move the setting of these parms somewhere else once
+ * we get a fib that can report the actual numbers
+ */
+ shost->max_lun = AAC_MAX_LUN;
+
+ pci_set_drvdata(pdev, shost);
+
+ error = scsi_add_host(shost, &pdev->dev);
+ if (error)
+ goto out_deinit;
+ scsi_scan_host(shost);
+
+ return 0;
+
+out_deinit:
+ kill_proc(aac->thread_pid, SIGKILL, 0);
+ wait_for_completion(&aac->aif_completion);
+
+ aac_send_shutdown(aac);
+ fib_map_free(aac);
+ pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr, aac->comm_phys);
+ kfree(aac->queues);
+ free_irq(pdev->irq, aac);
+ iounmap(aac->regs.sa);
+ out_free_fibs:
+ kfree(aac->fibs);
+ kfree(aac->fsa_dev);
+ out_free_host:
+ scsi_host_put(shost);
+ out_disable_pdev:
+ pci_disable_device(pdev);
+ out:
+ return error;
+}
+
+static void __devexit aac_remove_one(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
+
+ scsi_remove_host(shost);
+
+ kill_proc(aac->thread_pid, SIGKILL, 0);
+ wait_for_completion(&aac->aif_completion);
+
+ aac_send_shutdown(aac);
+ fib_map_free(aac);
+ pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr,
+ aac->comm_phys);
+ kfree(aac->queues);
+
+ free_irq(pdev->irq, aac);
+ iounmap(aac->regs.sa);
+
+ kfree(aac->fibs);
+
+ list_del(&aac->entry);
+ scsi_host_put(shost);
+ pci_disable_device(pdev);
+}
+
+static struct pci_driver aac_pci_driver = {
+ .name = AAC_DRIVERNAME,
+ .id_table = aac_pci_tbl,
+ .probe = aac_probe_one,
+ .remove = __devexit_p(aac_remove_one),
+};
+
+static int __init aac_init(void)
+{
+ int error;
+
+ printk(KERN_INFO "Red Hat/Adaptec aacraid driver (%s %s)\n",
+ AAC_DRIVER_VERSION, AAC_DRIVER_BUILD_DATE);
+
+ error = pci_module_init(&aac_pci_driver);
+ if (error)
+ return error;
+
+ aac_cfg_major = register_chrdev( 0, "aac", &aac_cfg_fops);
+ if (aac_cfg_major < 0) {
+ printk(KERN_WARNING
+ "aacraid: unable to register \"aac\" device.\n");
+ }
+ return 0;
+}
+
+static void __exit aac_exit(void)
+{
+ unregister_chrdev(aac_cfg_major, "aac");
+ pci_unregister_driver(&aac_pci_driver);
+}
+
+module_init(aac_init);
+module_exit(aac_exit);
diff --git a/drivers/scsi/aacraid/rkt.c b/drivers/scsi/aacraid/rkt.c
new file mode 100644
index 000000000000..1b8ed47cfe30
--- /dev/null
+++ b/drivers/scsi/aacraid/rkt.c
@@ -0,0 +1,440 @@
+/*
+ * Adaptec AAC series RAID controller driver
+ * (c) Copyright 2001 Red Hat Inc. <alan@redhat.com>
+ *
+ * based on the old aacraid driver that is..
+ * Adaptec aacraid device driver for Linux.
+ *
+ * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Module Name:
+ * rkt.c
+ *
+ * Abstract: Hardware miniport for Drawbridge specific hardware functions.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/completion.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <asm/semaphore.h>
+
+#include <scsi/scsi_host.h>
+
+#include "aacraid.h"
+
+static irqreturn_t aac_rkt_intr(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct aac_dev *dev = dev_id;
+ unsigned long bellbits;
+ u8 intstat, mask;
+ intstat = rkt_readb(dev, MUnit.OISR);
+ /*
+ * Read mask and invert because drawbridge is reversed.
+ * This allows us to only service interrupts that have
+ * been enabled.
+ */
+ mask = ~(dev->OIMR);
+ /* Check to see if this is our interrupt. If it isn't just return */
+ if (intstat & mask)
+ {
+ bellbits = rkt_readl(dev, OutboundDoorbellReg);
+ if (bellbits & DoorBellPrintfReady) {
+ aac_printf(dev, rkt_readl(dev, IndexRegs.Mailbox[5]));
+ rkt_writel(dev, MUnit.ODR,DoorBellPrintfReady);
+ rkt_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
+ }
+ else if (bellbits & DoorBellAdapterNormCmdReady) {
+ rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
+ aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
+ }
+ else if (bellbits & DoorBellAdapterNormRespReady) {
+ aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
+ rkt_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady);
+ }
+ else if (bellbits & DoorBellAdapterNormCmdNotFull) {
+ rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
+ }
+ else if (bellbits & DoorBellAdapterNormRespNotFull) {
+ rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
+ rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull);
+ }
+ return IRQ_HANDLED;
+ }
+ return IRQ_NONE;
+}
+
+/**
+ * rkt_sync_cmd - send a command and wait
+ * @dev: Adapter
+ * @command: Command to execute
+ * @p1: first parameter
+ * @ret: adapter status
+ *
+ * This routine will send a synchronous command to the adapter and wait
+ * for its completion.
+ */
+
+static int rkt_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status)
+{
+ unsigned long start;
+ int ok;
+ /*
+ * Write the command into Mailbox 0
+ */
+ rkt_writel(dev, InboundMailbox0, command);
+ /*
+ * Write the parameters into Mailboxes 1 - 4
+ */
+ rkt_writel(dev, InboundMailbox1, p1);
+ rkt_writel(dev, InboundMailbox2, 0);
+ rkt_writel(dev, InboundMailbox3, 0);
+ rkt_writel(dev, InboundMailbox4, 0);
+ /*
+ * Clear the synch command doorbell to start on a clean slate.
+ */
+ rkt_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0);
+ /*
+ * Disable doorbell interrupts
+ */
+ rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
+ /*
+ * Force the completion of the mask register write before issuing
+ * the interrupt.
+ */
+ rkt_readb (dev, MUnit.OIMR);
+ /*
+ * Signal that there is a new synch command
+ */
+ rkt_writel(dev, InboundDoorbellReg, INBOUNDDOORBELL_0);
+
+ ok = 0;
+ start = jiffies;
+
+ /*
+ * Wait up to 30 seconds
+ */
+ while (time_before(jiffies, start+30*HZ))
+ {
+ udelay(5); /* Delay 5 microseconds to let Mon960 get info. */
+ /*
+ * Mon960 will set doorbell0 bit when it has completed the command.
+ */
+ if (rkt_readl(dev, OutboundDoorbellReg) & OUTBOUNDDOORBELL_0) {
+ /*
+ * Clear the doorbell.
+ */
+ rkt_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0);
+ ok = 1;
+ break;
+ }
+ /*
+ * Yield the processor in case we are slow
+ */
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(1);
+ }
+ if (ok != 1) {
+ /*
+ * Restore interrupt mask even though we timed out
+ */
+ rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
+ return -ETIMEDOUT;
+ }
+ /*
+ * Pull the synch status from Mailbox 0.
+ */
+ if (status)
+ *status = rkt_readl(dev, IndexRegs.Mailbox[0]);
+ /*
+ * Clear the synch command doorbell.
+ */
+ rkt_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0);
+ /*
+ * Restore interrupt mask
+ */
+ rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
+ return 0;
+
+}
+
+/**
+ * aac_rkt_interrupt_adapter - interrupt adapter
+ * @dev: Adapter
+ *
+ * Send an interrupt to the i960 and breakpoint it.
+ */
+
+static void aac_rkt_interrupt_adapter(struct aac_dev *dev)
+{
+ u32 ret;
+ rkt_sync_cmd(dev, BREAKPOINT_REQUEST, 0, &ret);
+}
+
+/**
+ * aac_rkt_notify_adapter - send an event to the adapter
+ * @dev: Adapter
+ * @event: Event to send
+ *
+ * Notify the i960 that something it probably cares about has
+ * happened.
+ */
+
+static void aac_rkt_notify_adapter(struct aac_dev *dev, u32 event)
+{
+ switch (event) {
+
+ case AdapNormCmdQue:
+ rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_1);
+ break;
+ case HostNormRespNotFull:
+ rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_4);
+ break;
+ case AdapNormRespQue:
+ rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_2);
+ break;
+ case HostNormCmdNotFull:
+ rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_3);
+ break;
+ case HostShutdown:
+// rkt_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, &ret);
+ break;
+ case FastIo:
+ rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_6);
+ break;
+ case AdapPrintfDone:
+ rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_5);
+ break;
+ default:
+ BUG();
+ break;
+ }
+}
+
+/**
+ * aac_rkt_start_adapter - activate adapter
+ * @dev: Adapter
+ *
+ * Start up processing on an i960 based AAC adapter
+ */
+
+static void aac_rkt_start_adapter(struct aac_dev *dev)
+{
+ u32 status;
+ struct aac_init *init;
+
+ init = dev->init;
+ init->HostElapsedSeconds = cpu_to_le32(get_seconds());
+ /*
+ * Tell the adapter we are back and up and running so it will scan
+ * its command queues and enable our interrupts
+ */
+ dev->irq_mask = (DoorBellPrintfReady | OUTBOUNDDOORBELL_1 | OUTBOUNDDOORBELL_2 | OUTBOUNDDOORBELL_3 | OUTBOUNDDOORBELL_4);
+ /*
+ * First clear out all interrupts. Then enable the one's that we
+ * can handle.
+ */
+ rkt_writeb(dev, MUnit.OIMR, 0xff);
+ rkt_writel(dev, MUnit.ODR, 0xffffffff);
+// rkt_writeb(dev, MUnit.OIMR, ~(u8)OUTBOUND_DOORBELL_INTERRUPT_MASK);
+ rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
+
+ // We can only use a 32 bit address here
+ rkt_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, &status);
+}
+
+/**
+ * aac_rkt_check_health
+ * @dev: device to check if healthy
+ *
+ * Will attempt to determine if the specified adapter is alive and
+ * capable of handling requests, returning 0 if alive.
+ */
+static int aac_rkt_check_health(struct aac_dev *dev)
+{
+ u32 status = rkt_readl(dev, MUnit.OMRx[0]);
+
+ /*
+ * Check to see if the board failed any self tests.
+ */
+ if (status & SELF_TEST_FAILED)
+ return -1;
+ /*
+ * Check to see if the board panic'd.
+ */
+ if (status & KERNEL_PANIC) {
+ char * buffer;
+ struct POSTSTATUS {
+ u32 Post_Command;
+ u32 Post_Address;
+ } * post;
+ dma_addr_t paddr, baddr;
+ int ret;
+
+ if ((status & 0xFF000000L) == 0xBC000000L)
+ return (status >> 16) & 0xFF;
+ buffer = pci_alloc_consistent(dev->pdev, 512, &baddr);
+ ret = -2;
+ if (buffer == NULL)
+ return ret;
+ post = pci_alloc_consistent(dev->pdev,
+ sizeof(struct POSTSTATUS), &paddr);
+ if (post == NULL) {
+ pci_free_consistent(dev->pdev, 512, buffer, baddr);
+ return ret;
+ }
+ memset(buffer, 0, 512);
+ post->Post_Command = cpu_to_le32(COMMAND_POST_RESULTS);
+ post->Post_Address = cpu_to_le32(baddr);
+ rkt_writel(dev, MUnit.IMRx[0], paddr);
+ rkt_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, &status);
+ pci_free_consistent(dev->pdev, sizeof(struct POSTSTATUS),
+ post, paddr);
+ if ((buffer[0] == '0') && (buffer[1] == 'x')) {
+ ret = (buffer[2] <= '9') ? (buffer[2] - '0') : (buffer[2] - 'A' + 10);
+ ret <<= 4;
+ ret += (buffer[3] <= '9') ? (buffer[3] - '0') : (buffer[3] - 'A' + 10);
+ }
+ pci_free_consistent(dev->pdev, 512, buffer, baddr);
+ return ret;
+ }
+ /*
+ * Wait for the adapter to be up and running.
+ */
+ if (!(status & KERNEL_UP_AND_RUNNING))
+ return -3;
+ /*
+ * Everything is OK
+ */
+ return 0;
+}
+
+/**
+ * aac_rkt_init - initialize an i960 based AAC card
+ * @dev: device to configure
+ *
+ * Allocate and set up resources for the i960 based AAC variants. The
+ * device_interface in the commregion will be allocated and linked
+ * to the comm region.
+ */
+
+int aac_rkt_init(struct aac_dev *dev)
+{
+ unsigned long start;
+ unsigned long status;
+ int instance;
+ const char * name;
+
+ instance = dev->id;
+ name = dev->name;
+
+ /*
+ * Map in the registers from the adapter.
+ */
+ if((dev->regs.rkt = ioremap((unsigned long)dev->scsi_host_ptr->base, 8192))==NULL)
+ {
+ printk(KERN_WARNING "aacraid: unable to map i960.\n" );
+ goto error_iounmap;
+ }
+ /*
+ * Check to see if the board failed any self tests.
+ */
+ if (rkt_readl(dev, MUnit.OMRx[0]) & SELF_TEST_FAILED) {
+ printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance);
+ goto error_iounmap;
+ }
+ /*
+ * Check to see if the monitor panic'd while booting.
+ */
+ if (rkt_readl(dev, MUnit.OMRx[0]) & MONITOR_PANIC) {
+ printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance);
+ goto error_iounmap;
+ }
+ /*
+ * Check to see if the board panic'd while booting.
+ */
+ if (rkt_readl(dev, MUnit.OMRx[0]) & KERNEL_PANIC) {
+ printk(KERN_ERR "%s%d: adapter kernel panic'd.\n", dev->name, instance);
+ goto error_iounmap;
+ }
+ start = jiffies;
+ /*
+ * Wait for the adapter to be up and running. Wait up to 3 minutes
+ */
+ while (!(rkt_readl(dev, MUnit.OMRx[0]) & KERNEL_UP_AND_RUNNING))
+ {
+ if(time_after(jiffies, start+180*HZ))
+ {
+ status = rkt_readl(dev, MUnit.OMRx[0]);
+ printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n",
+ dev->name, instance, status);
+ goto error_iounmap;
+ }
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(1);
+ }
+ if (request_irq(dev->scsi_host_ptr->irq, aac_rkt_intr, SA_SHIRQ|SA_INTERRUPT, "aacraid", (void *)dev)<0)
+ {
+ printk(KERN_ERR "%s%d: Interrupt unavailable.\n", name, instance);
+ goto error_iounmap;
+ }
+ /*
+ * Fill in the function dispatch table.
+ */
+ dev->a_ops.adapter_interrupt = aac_rkt_interrupt_adapter;
+ dev->a_ops.adapter_notify = aac_rkt_notify_adapter;
+ dev->a_ops.adapter_sync_cmd = rkt_sync_cmd;
+ dev->a_ops.adapter_check_health = aac_rkt_check_health;
+
+ if (aac_init_adapter(dev) == NULL)
+ goto error_irq;
+ /*
+ * Start any kernel threads needed
+ */
+ dev->thread_pid = kernel_thread((int (*)(void *))aac_command_thread, dev, 0);
+ if(dev->thread_pid < 0)
+ {
+ printk(KERN_ERR "aacraid: Unable to create rkt thread.\n");
+ goto error_kfree;
+ }
+ /*
+ * Tell the adapter that all is configured, and it can start
+ * accepting requests
+ */
+ aac_rkt_start_adapter(dev);
+ return 0;
+
+error_kfree:
+ kfree(dev->queues);
+
+error_irq:
+ free_irq(dev->scsi_host_ptr->irq, (void *)dev);
+
+error_iounmap:
+ iounmap(dev->regs.rkt);
+
+ return -1;
+}
diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c
new file mode 100644
index 000000000000..630b99e1fe83
--- /dev/null
+++ b/drivers/scsi/aacraid/rx.c
@@ -0,0 +1,441 @@
+/*
+ * Adaptec AAC series RAID controller driver
+ * (c) Copyright 2001 Red Hat Inc. <alan@redhat.com>
+ *
+ * based on the old aacraid driver that is..
+ * Adaptec aacraid device driver for Linux.
+ *
+ * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Module Name:
+ * rx.c
+ *
+ * Abstract: Hardware miniport for Drawbridge specific hardware functions.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/completion.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <asm/semaphore.h>
+
+#include <scsi/scsi_host.h>
+
+#include "aacraid.h"
+
+static irqreturn_t aac_rx_intr(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct aac_dev *dev = dev_id;
+ unsigned long bellbits;
+ u8 intstat, mask;
+ intstat = rx_readb(dev, MUnit.OISR);
+ /*
+ * Read mask and invert because drawbridge is reversed.
+ * This allows us to only service interrupts that have
+ * been enabled.
+ */
+ mask = ~(dev->OIMR);
+ /* Check to see if this is our interrupt. If it isn't just return */
+ if (intstat & mask)
+ {
+ bellbits = rx_readl(dev, OutboundDoorbellReg);
+ if (bellbits & DoorBellPrintfReady) {
+ aac_printf(dev, le32_to_cpu(rx_readl (dev, IndexRegs.Mailbox[5])));
+ rx_writel(dev, MUnit.ODR,DoorBellPrintfReady);
+ rx_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
+ }
+ else if (bellbits & DoorBellAdapterNormCmdReady) {
+ rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
+ aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
+ }
+ else if (bellbits & DoorBellAdapterNormRespReady) {
+ aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
+ rx_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady);
+ }
+ else if (bellbits & DoorBellAdapterNormCmdNotFull) {
+ rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
+ }
+ else if (bellbits & DoorBellAdapterNormRespNotFull) {
+ rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
+ rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull);
+ }
+ return IRQ_HANDLED;
+ }
+ return IRQ_NONE;
+}
+
+/**
+ * rx_sync_cmd - send a command and wait
+ * @dev: Adapter
+ * @command: Command to execute
+ * @p1: first parameter
+ * @ret: adapter status
+ *
+ * This routine will send a synchronous command to the adapter and wait
+ * for its completion.
+ */
+
+static int rx_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status)
+{
+ unsigned long start;
+ int ok;
+ /*
+ * Write the command into Mailbox 0
+ */
+ rx_writel(dev, InboundMailbox0, command);
+ /*
+ * Write the parameters into Mailboxes 1 - 4
+ */
+ rx_writel(dev, InboundMailbox1, p1);
+ rx_writel(dev, InboundMailbox2, 0);
+ rx_writel(dev, InboundMailbox3, 0);
+ rx_writel(dev, InboundMailbox4, 0);
+ /*
+ * Clear the synch command doorbell to start on a clean slate.
+ */
+ rx_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0);
+ /*
+ * Disable doorbell interrupts
+ */
+ rx_writeb(dev, MUnit.OIMR, dev->OIMR |= 0x04);
+ /*
+ * Force the completion of the mask register write before issuing
+ * the interrupt.
+ */
+ rx_readb (dev, MUnit.OIMR);
+ /*
+ * Signal that there is a new synch command
+ */
+ rx_writel(dev, InboundDoorbellReg, INBOUNDDOORBELL_0);
+
+ ok = 0;
+ start = jiffies;
+
+ /*
+ * Wait up to 30 seconds
+ */
+ while (time_before(jiffies, start+30*HZ))
+ {
+ udelay(5); /* Delay 5 microseconds to let Mon960 get info. */
+ /*
+ * Mon960 will set doorbell0 bit when it has completed the command.
+ */
+ if (rx_readl(dev, OutboundDoorbellReg) & OUTBOUNDDOORBELL_0) {
+ /*
+ * Clear the doorbell.
+ */
+ rx_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0);
+ ok = 1;
+ break;
+ }
+ /*
+ * Yield the processor in case we are slow
+ */
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(1);
+ }
+ if (ok != 1) {
+ /*
+ * Restore interrupt mask even though we timed out
+ */
+ rx_writeb(dev, MUnit.OIMR, dev->OIMR &= 0xfb);
+ return -ETIMEDOUT;
+ }
+ /*
+ * Pull the synch status from Mailbox 0.
+ */
+ if (status)
+ *status = rx_readl(dev, IndexRegs.Mailbox[0]);
+ /*
+ * Clear the synch command doorbell.
+ */
+ rx_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0);
+ /*
+ * Restore interrupt mask
+ */
+ rx_writeb(dev, MUnit.OIMR, dev->OIMR &= 0xfb);
+ return 0;
+
+}
+
+/**
+ * aac_rx_interrupt_adapter - interrupt adapter
+ * @dev: Adapter
+ *
+ * Send an interrupt to the i960 and breakpoint it.
+ */
+
+static void aac_rx_interrupt_adapter(struct aac_dev *dev)
+{
+ u32 ret;
+ rx_sync_cmd(dev, BREAKPOINT_REQUEST, 0, &ret);
+}
+
+/**
+ * aac_rx_notify_adapter - send an event to the adapter
+ * @dev: Adapter
+ * @event: Event to send
+ *
+ * Notify the i960 that something it probably cares about has
+ * happened.
+ */
+
+static void aac_rx_notify_adapter(struct aac_dev *dev, u32 event)
+{
+ switch (event) {
+
+ case AdapNormCmdQue:
+ rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_1);
+ break;
+ case HostNormRespNotFull:
+ rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_4);
+ break;
+ case AdapNormRespQue:
+ rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_2);
+ break;
+ case HostNormCmdNotFull:
+ rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_3);
+ break;
+ case HostShutdown:
+// rx_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, &ret);
+ break;
+ case FastIo:
+ rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_6);
+ break;
+ case AdapPrintfDone:
+ rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_5);
+ break;
+ default:
+ BUG();
+ break;
+ }
+}
+
+/**
+ * aac_rx_start_adapter - activate adapter
+ * @dev: Adapter
+ *
+ * Start up processing on an i960 based AAC adapter
+ */
+
+static void aac_rx_start_adapter(struct aac_dev *dev)
+{
+ u32 status;
+ struct aac_init *init;
+
+ init = dev->init;
+ init->HostElapsedSeconds = cpu_to_le32(get_seconds());
+ /*
+ * Tell the adapter we are back and up and running so it will scan
+ * its command queues and enable our interrupts
+ */
+ dev->irq_mask = (DoorBellPrintfReady | OUTBOUNDDOORBELL_1 | OUTBOUNDDOORBELL_2 | OUTBOUNDDOORBELL_3 | OUTBOUNDDOORBELL_4);
+ /*
+ * First clear out all interrupts. Then enable the one's that we
+ * can handle.
+ */
+ rx_writeb(dev, MUnit.OIMR, 0xff);
+ rx_writel(dev, MUnit.ODR, 0xffffffff);
+// rx_writeb(dev, MUnit.OIMR, ~(u8)OUTBOUND_DOORBELL_INTERRUPT_MASK);
+ rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
+
+ // We can only use a 32 bit address here
+ rx_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, &status);
+}
+
+/**
+ * aac_rx_check_health
+ * @dev: device to check if healthy
+ *
+ * Will attempt to determine if the specified adapter is alive and
+ * capable of handling requests, returning 0 if alive.
+ */
+static int aac_rx_check_health(struct aac_dev *dev)
+{
+ u32 status = rx_readl(dev, MUnit.OMRx[0]);
+
+ /*
+ * Check to see if the board failed any self tests.
+ */
+ if (status & SELF_TEST_FAILED)
+ return -1;
+ /*
+ * Check to see if the board panic'd.
+ */
+ if (status & KERNEL_PANIC) {
+ char * buffer;
+ struct POSTSTATUS {
+ u32 Post_Command;
+ u32 Post_Address;
+ } * post;
+ dma_addr_t paddr, baddr;
+ int ret;
+
+ if ((status & 0xFF000000L) == 0xBC000000L)
+ return (status >> 16) & 0xFF;
+ buffer = pci_alloc_consistent(dev->pdev, 512, &baddr);
+ ret = -2;
+ if (buffer == NULL)
+ return ret;
+ post = pci_alloc_consistent(dev->pdev,
+ sizeof(struct POSTSTATUS), &paddr);
+ if (post == NULL) {
+ pci_free_consistent(dev->pdev, 512, buffer, baddr);
+ return ret;
+ }
+ memset(buffer, 0, 512);
+ post->Post_Command = cpu_to_le32(COMMAND_POST_RESULTS);
+ post->Post_Address = cpu_to_le32(baddr);
+ rx_writel(dev, MUnit.IMRx[0], paddr);
+ rx_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, &status);
+ pci_free_consistent(dev->pdev, sizeof(struct POSTSTATUS),
+ post, paddr);
+ if ((buffer[0] == '0') && (buffer[1] == 'x')) {
+ ret = (buffer[2] <= '9') ? (buffer[2] - '0') : (buffer[2] - 'A' + 10);
+ ret <<= 4;
+ ret += (buffer[3] <= '9') ? (buffer[3] - '0') : (buffer[3] - 'A' + 10);
+ }
+ pci_free_consistent(dev->pdev, 512, buffer, baddr);
+ return ret;
+ }
+ /*
+ * Wait for the adapter to be up and running.
+ */
+ if (!(status & KERNEL_UP_AND_RUNNING))
+ return -3;
+ /*
+ * Everything is OK
+ */
+ return 0;
+}
+
+/**
+ * aac_rx_init - initialize an i960 based AAC card
+ * @dev: device to configure
+ *
+ * Allocate and set up resources for the i960 based AAC variants. The
+ * device_interface in the commregion will be allocated and linked
+ * to the comm region.
+ */
+
+int aac_rx_init(struct aac_dev *dev)
+{
+ unsigned long start;
+ unsigned long status;
+ int instance;
+ const char * name;
+
+ instance = dev->id;
+ name = dev->name;
+
+ /*
+ * Map in the registers from the adapter.
+ */
+ if((dev->regs.rx = ioremap((unsigned long)dev->scsi_host_ptr->base, 8192))==NULL)
+ {
+ printk(KERN_WARNING "aacraid: unable to map i960.\n" );
+ return -1;
+ }
+ /*
+ * Check to see if the board failed any self tests.
+ */
+ if (rx_readl(dev, MUnit.OMRx[0]) & SELF_TEST_FAILED) {
+ printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance);
+ goto error_iounmap;
+ }
+ /*
+ * Check to see if the board panic'd while booting.
+ */
+ if (rx_readl(dev, MUnit.OMRx[0]) & KERNEL_PANIC) {
+ printk(KERN_ERR "%s%d: adapter kernel panic.\n", dev->name, instance);
+ goto error_iounmap;
+ }
+ /*
+ * Check to see if the monitor panic'd while booting.
+ */
+ if (rx_readl(dev, MUnit.OMRx[0]) & MONITOR_PANIC) {
+ printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance);
+ goto error_iounmap;
+ }
+ start = jiffies;
+ /*
+ * Wait for the adapter to be up and running. Wait up to 3 minutes
+ */
+ while ((!(rx_readl(dev, IndexRegs.Mailbox[7]) & KERNEL_UP_AND_RUNNING))
+ || (!(rx_readl(dev, MUnit.OMRx[0]) & KERNEL_UP_AND_RUNNING)))
+ {
+ if(time_after(jiffies, start+180*HZ))
+ {
+ status = rx_readl(dev, IndexRegs.Mailbox[7]);
+ printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n",
+ dev->name, instance, status);
+ goto error_iounmap;
+ }
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(1);
+ }
+ if (request_irq(dev->scsi_host_ptr->irq, aac_rx_intr, SA_SHIRQ|SA_INTERRUPT, "aacraid", (void *)dev)<0)
+ {
+ printk(KERN_ERR "%s%d: Interrupt unavailable.\n", name, instance);
+ goto error_iounmap;
+ }
+ /*
+ * Fill in the function dispatch table.
+ */
+ dev->a_ops.adapter_interrupt = aac_rx_interrupt_adapter;
+ dev->a_ops.adapter_notify = aac_rx_notify_adapter;
+ dev->a_ops.adapter_sync_cmd = rx_sync_cmd;
+ dev->a_ops.adapter_check_health = aac_rx_check_health;
+
+ if (aac_init_adapter(dev) == NULL)
+ goto error_irq;
+ /*
+ * Start any kernel threads needed
+ */
+ dev->thread_pid = kernel_thread((int (*)(void *))aac_command_thread, dev, 0);
+ if(dev->thread_pid < 0)
+ {
+ printk(KERN_ERR "aacraid: Unable to create rx thread.\n");
+ goto error_kfree;
+ }
+ /*
+ * Tell the adapter that all is configured, and it can start
+ * accepting requests
+ */
+ aac_rx_start_adapter(dev);
+ return 0;
+
+error_kfree:
+ kfree(dev->queues);
+
+error_irq:
+ free_irq(dev->scsi_host_ptr->irq, (void *)dev);
+
+error_iounmap:
+ iounmap(dev->regs.rx);
+
+ return -1;
+}
diff --git a/drivers/scsi/aacraid/sa.c b/drivers/scsi/aacraid/sa.c
new file mode 100644
index 000000000000..bd6c30723fba
--- /dev/null
+++ b/drivers/scsi/aacraid/sa.c
@@ -0,0 +1,374 @@
+/*
+ * Adaptec AAC series RAID controller driver
+ * (c) Copyright 2001 Red Hat Inc. <alan@redhat.com>
+ *
+ * based on the old aacraid driver that is..
+ * Adaptec aacraid device driver for Linux.
+ *
+ * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Module Name:
+ * sa.c
+ *
+ * Abstract: Drawbridge specific support functions
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/completion.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <asm/semaphore.h>
+
+#include <scsi/scsi_host.h>
+
+#include "aacraid.h"
+
+static irqreturn_t aac_sa_intr(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct aac_dev *dev = dev_id;
+ unsigned short intstat, mask;
+
+ intstat = sa_readw(dev, DoorbellReg_p);
+ /*
+ * Read mask and invert because drawbridge is reversed.
+ * This allows us to only service interrupts that have been enabled.
+ */
+ mask = ~(sa_readw(dev, SaDbCSR.PRISETIRQMASK));
+
+ /* Check to see if this is our interrupt. If it isn't just return */
+
+ if (intstat & mask) {
+ if (intstat & PrintfReady) {
+ aac_printf(dev, sa_readl(dev, Mailbox5));
+ sa_writew(dev, DoorbellClrReg_p, PrintfReady); /* clear PrintfReady */
+ sa_writew(dev, DoorbellReg_s, PrintfDone);
+ } else if (intstat & DOORBELL_1) { // dev -> Host Normal Command Ready
+ aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
+ sa_writew(dev, DoorbellClrReg_p, DOORBELL_1);
+ } else if (intstat & DOORBELL_2) { // dev -> Host Normal Response Ready
+ aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
+ sa_writew(dev, DoorbellClrReg_p, DOORBELL_2);
+ } else if (intstat & DOORBELL_3) { // dev -> Host Normal Command Not Full
+ sa_writew(dev, DoorbellClrReg_p, DOORBELL_3);
+ } else if (intstat & DOORBELL_4) { // dev -> Host Normal Response Not Full
+ sa_writew(dev, DoorbellClrReg_p, DOORBELL_4);
+ }
+ return IRQ_HANDLED;
+ }
+ return IRQ_NONE;
+}
+
+/**
+ * aac_sa_notify_adapter - handle adapter notification
+ * @dev: Adapter that notification is for
+ * @event: Event to notidy
+ *
+ * Notify the adapter of an event
+ */
+
+void aac_sa_notify_adapter(struct aac_dev *dev, u32 event)
+{
+ switch (event) {
+
+ case AdapNormCmdQue:
+ sa_writew(dev, DoorbellReg_s,DOORBELL_1);
+ break;
+ case HostNormRespNotFull:
+ sa_writew(dev, DoorbellReg_s,DOORBELL_4);
+ break;
+ case AdapNormRespQue:
+ sa_writew(dev, DoorbellReg_s,DOORBELL_2);
+ break;
+ case HostNormCmdNotFull:
+ sa_writew(dev, DoorbellReg_s,DOORBELL_3);
+ break;
+ case HostShutdown:
+ //sa_sync_cmd(dev, HOST_CRASHING, 0, &ret);
+ break;
+ case FastIo:
+ sa_writew(dev, DoorbellReg_s,DOORBELL_6);
+ break;
+ case AdapPrintfDone:
+ sa_writew(dev, DoorbellReg_s,DOORBELL_5);
+ break;
+ default:
+ BUG();
+ break;
+ }
+}
+
+
+/**
+ * sa_sync_cmd - send a command and wait
+ * @dev: Adapter
+ * @command: Command to execute
+ * @p1: first parameter
+ * @ret: adapter status
+ *
+ * This routine will send a synchronous command to the adapter and wait
+ * for its completion.
+ */
+
+static int sa_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *ret)
+{
+ unsigned long start;
+ int ok;
+ /*
+ * Write the Command into Mailbox 0
+ */
+ sa_writel(dev, Mailbox0, command);
+ /*
+ * Write the parameters into Mailboxes 1 - 4
+ */
+ sa_writel(dev, Mailbox1, p1);
+ sa_writel(dev, Mailbox2, 0);
+ sa_writel(dev, Mailbox3, 0);
+ sa_writel(dev, Mailbox4, 0);
+ /*
+ * Clear the synch command doorbell to start on a clean slate.
+ */
+ sa_writew(dev, DoorbellClrReg_p, DOORBELL_0);
+ /*
+ * Signal that there is a new synch command
+ */
+ sa_writew(dev, DoorbellReg_s, DOORBELL_0);
+
+ ok = 0;
+ start = jiffies;
+
+ while(time_before(jiffies, start+30*HZ))
+ {
+ /*
+ * Delay 5uS so that the monitor gets access
+ */
+ udelay(5);
+ /*
+ * Mon110 will set doorbell0 bit when it has
+ * completed the command.
+ */
+ if(sa_readw(dev, DoorbellReg_p) & DOORBELL_0) {
+ ok = 1;
+ break;
+ }
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(1);
+ }
+
+ if (ok != 1)
+ return -ETIMEDOUT;
+ /*
+ * Clear the synch command doorbell.
+ */
+ sa_writew(dev, DoorbellClrReg_p, DOORBELL_0);
+ /*
+ * Pull the synch status from Mailbox 0.
+ */
+ if (ret)
+ *ret = sa_readl(dev, Mailbox0);
+ return 0;
+}
+
+/**
+ * aac_sa_interrupt_adapter - interrupt an adapter
+ * @dev: Which adapter to enable.
+ *
+ * Breakpoint an adapter.
+ */
+
+static void aac_sa_interrupt_adapter (struct aac_dev *dev)
+{
+ u32 ret;
+ sa_sync_cmd(dev, BREAKPOINT_REQUEST, 0, &ret);
+}
+
+/**
+ * aac_sa_start_adapter - activate adapter
+ * @dev: Adapter
+ *
+ * Start up processing on an ARM based AAC adapter
+ */
+
+static void aac_sa_start_adapter(struct aac_dev *dev)
+{
+ u32 ret;
+ struct aac_init *init;
+ /*
+ * Fill in the remaining pieces of the init.
+ */
+ init = dev->init;
+ init->HostElapsedSeconds = cpu_to_le32(get_seconds());
+
+ /*
+ * Tell the adapter we are back and up and running so it will scan its command
+ * queues and enable our interrupts
+ */
+ dev->irq_mask = (PrintfReady | DOORBELL_1 | DOORBELL_2 | DOORBELL_3 | DOORBELL_4);
+ /*
+ * First clear out all interrupts. Then enable the one's that
+ * we can handle.
+ */
+ sa_writew(dev, SaDbCSR.PRISETIRQMASK, cpu_to_le16(0xffff));
+ sa_writew(dev, SaDbCSR.PRICLEARIRQMASK, (PrintfReady | DOORBELL_1 | DOORBELL_2 | DOORBELL_3 | DOORBELL_4));
+ /* We can only use a 32 bit address here */
+ sa_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, &ret);
+}
+
+/**
+ * aac_sa_check_health
+ * @dev: device to check if healthy
+ *
+ * Will attempt to determine if the specified adapter is alive and
+ * capable of handling requests, returning 0 if alive.
+ */
+static int aac_sa_check_health(struct aac_dev *dev)
+{
+ long status = sa_readl(dev, Mailbox7);
+
+ /*
+ * Check to see if the board failed any self tests.
+ */
+ if (status & SELF_TEST_FAILED)
+ return -1;
+ /*
+ * Check to see if the board panic'd while booting.
+ */
+ if (status & KERNEL_PANIC)
+ return -2;
+ /*
+ * Wait for the adapter to be up and running. Wait up to 3 minutes
+ */
+ if (!(status & KERNEL_UP_AND_RUNNING))
+ return -3;
+ /*
+ * Everything is OK
+ */
+ return 0;
+}
+
+/**
+ * aac_sa_init - initialize an ARM based AAC card
+ * @dev: device to configure
+ *
+ * Allocate and set up resources for the ARM based AAC variants. The
+ * device_interface in the commregion will be allocated and linked
+ * to the comm region.
+ */
+
+int aac_sa_init(struct aac_dev *dev)
+{
+ unsigned long start;
+ unsigned long status;
+ int instance;
+ const char *name;
+
+ instance = dev->id;
+ name = dev->name;
+
+ /*
+ * Map in the registers from the adapter.
+ */
+
+ if((dev->regs.sa = ioremap((unsigned long)dev->scsi_host_ptr->base, 8192))==NULL)
+ {
+ printk(KERN_WARNING "aacraid: unable to map ARM.\n" );
+ goto error_iounmap;
+ }
+ /*
+ * Check to see if the board failed any self tests.
+ */
+ if (sa_readl(dev, Mailbox7) & SELF_TEST_FAILED) {
+ printk(KERN_WARNING "%s%d: adapter self-test failed.\n", name, instance);
+ goto error_iounmap;
+ }
+ /*
+ * Check to see if the board panic'd while booting.
+ */
+ if (sa_readl(dev, Mailbox7) & KERNEL_PANIC) {
+ printk(KERN_WARNING "%s%d: adapter kernel panic'd.\n", name, instance);
+ goto error_iounmap;
+ }
+ start = jiffies;
+ /*
+ * Wait for the adapter to be up and running. Wait up to 3 minutes.
+ */
+ while (!(sa_readl(dev, Mailbox7) & KERNEL_UP_AND_RUNNING)) {
+ if (time_after(jiffies, start+180*HZ)) {
+ status = sa_readl(dev, Mailbox7);
+ printk(KERN_WARNING "%s%d: adapter kernel failed to start, init status = %lx.\n",
+ name, instance, status);
+ goto error_iounmap;
+ }
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(1);
+ }
+
+ if (request_irq(dev->scsi_host_ptr->irq, aac_sa_intr, SA_SHIRQ|SA_INTERRUPT, "aacraid", (void *)dev ) < 0) {
+ printk(KERN_WARNING "%s%d: Interrupt unavailable.\n", name, instance);
+ goto error_iounmap;
+ }
+
+ /*
+ * Fill in the function dispatch table.
+ */
+
+ dev->a_ops.adapter_interrupt = aac_sa_interrupt_adapter;
+ dev->a_ops.adapter_notify = aac_sa_notify_adapter;
+ dev->a_ops.adapter_sync_cmd = sa_sync_cmd;
+ dev->a_ops.adapter_check_health = aac_sa_check_health;
+
+
+ if(aac_init_adapter(dev) == NULL)
+ goto error_irq;
+
+ /*
+ * Start any kernel threads needed
+ */
+ dev->thread_pid = kernel_thread((int (*)(void *))aac_command_thread, dev, 0);
+ if (dev->thread_pid < 0) {
+ printk(KERN_ERR "aacraid: Unable to create command thread.\n");
+ goto error_kfree;
+ }
+
+ /*
+ * Tell the adapter that all is configure, and it can start
+ * accepting requests
+ */
+ aac_sa_start_adapter(dev);
+ return 0;
+
+
+error_kfree:
+ kfree(dev->queues);
+
+error_irq:
+ free_irq(dev->scsi_host_ptr->irq, (void *)dev);
+
+error_iounmap:
+ iounmap(dev->regs.sa);
+
+ return -1;
+}
+