1 files changed, 66 insertions, 65 deletions

diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index 6c68c2303638..b1a749ab18f8 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -47,11 +47,15 @@
 #include <asm/irq.h>
 #include <asm/ecard.h>
 
-#include "../scsi.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_dbg.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
 #include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
 #include "fas216.h"
-#include "scsi.h"
+#include "arm_scsi.h"
 
 /* NOTE: SCSI2 Synchronous transfers *require* DMA according to
  *  the data sheet.  This restriction is crazy, especially when
@@ -77,7 +81,6 @@
  *  I was thinking that this was a good chip until I found this restriction ;(
  */
 #define SCSI2_SYNC
-#undef  SCSI2_TAG
 
 #undef DEBUG_CONNECT
 #undef DEBUG_MESSAGES
@@ -603,7 +606,7 @@ static void fas216_handlesync(FAS216_Info *info, char *msg)
 		msgqueue_flush(&info->scsi.msgs);
 		msgqueue_addmsg(&info->scsi.msgs, 1, MESSAGE_REJECT);
 		info->scsi.phase = PHASE_MSGOUT_EXPECT;
-		/* fall through */
+		fallthrough;
 
 	case async:
 		dev->period = info->ifcfg.asyncperiod / 4;
@@ -758,7 +761,7 @@ static void fas216_transfer(FAS216_Info *info)
 		fas216_log(info, LOG_ERROR, "null buffer passed to "
 			   "fas216_starttransfer");
 		print_SCp(&info->scsi.SCp, "SCp: ", "\n");
-		print_SCp(&info->SCpnt->SCp, "Cmnd SCp: ", "\n");
+		print_SCp(arm_scsi_pointer(info->SCpnt), "Cmnd SCp: ", "\n");
 		return;
 	}
 
@@ -916,7 +919,7 @@ static void fas216_disconnect_intr(FAS216_Info *info)
 			fas216_done(info, DID_ABORT);
 			break;
 		}
-		/* else, fall through */
+		fallthrough;
 
 	default:				/* huh?					*/
 		printk(KERN_ERR "scsi%d.%c: unexpected disconnect in phase %s\n",
@@ -990,7 +993,7 @@ fas216_reselected_intr(FAS216_Info *info)
 		info->scsi.disconnectable = 0;
 		if (info->SCpnt->device->id  == target &&
 		    info->SCpnt->device->lun == lun &&
-		    info->SCpnt->tag         == tag) {
+		    scsi_cmd_to_rq(info->SCpnt)->tag == tag) {
 			fas216_log(info, LOG_CONNECT, "reconnected previously executing command");
 		} else {
 			queue_add_cmd_tail(&info->queues.disconnected, info->SCpnt);
@@ -1008,7 +1011,7 @@ fas216_reselected_intr(FAS216_Info *info)
 		/*
 		 * Restore data pointer from SAVED data pointer
 		 */
-		info->scsi.SCp = info->SCpnt->SCp;
+		info->scsi.SCp = *arm_scsi_pointer(info->SCpnt);
 
 		fas216_log(info, LOG_CONNECT, "data pointers: [%p, %X]",
 			info->scsi.SCp.ptr, info->scsi.SCp.this_residual);
@@ -1051,6 +1054,7 @@ fas216_reselected_intr(FAS216_Info *info)
 
 static void fas216_parse_message(FAS216_Info *info, unsigned char *message, int msglen)
 {
+	struct scsi_pointer *scsi_pointer;
 	int i;
 
 	switch (message[0]) {
@@ -1075,8 +1079,9 @@ static void fas216_parse_message(FAS216_Info *info, unsigned char *message, int
 		 * as required by the SCSI II standard.  These always
 		 * point to the start of their respective areas.
 		 */
-		info->SCpnt->SCp = info->scsi.SCp;
-		info->SCpnt->SCp.sent_command = 0;
+		scsi_pointer = arm_scsi_pointer(info->SCpnt);
+		*scsi_pointer = info->scsi.SCp;
+		scsi_pointer->sent_command = 0;
 		fas216_log(info, LOG_CONNECT | LOG_MESSAGES | LOG_BUFFER,
 			"save data pointers: [%p, %X]",
 			info->scsi.SCp.ptr, info->scsi.SCp.this_residual);
@@ -1089,7 +1094,7 @@ static void fas216_parse_message(FAS216_Info *info, unsigned char *message, int
 		/*
 		 * Restore current data pointer from SAVED data pointer
 		 */
-		info->scsi.SCp = info->SCpnt->SCp;
+		info->scsi.SCp = *arm_scsi_pointer(info->SCpnt);
 		fas216_log(info, LOG_CONNECT | LOG_MESSAGES | LOG_BUFFER,
 			"restore data pointers: [%p, 0x%x]",
 			info->scsi.SCp.ptr, info->scsi.SCp.this_residual);
@@ -1375,6 +1380,7 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne
 		case IS_COMPLETE:
 			break;
 		}
+		break;
 
 	default:
 		break;
@@ -1413,7 +1419,7 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne
 	case STATE(STAT_STATUS, PHASE_DATAOUT): /* Data Out     -> Status       */
 	case STATE(STAT_STATUS, PHASE_DATAIN):  /* Data In      -> Status       */
 		fas216_stoptransfer(info);
-		/* fall through */
+		fallthrough;
 
 	case STATE(STAT_STATUS, PHASE_SELSTEPS):/* Sel w/ steps -> Status       */
 	case STATE(STAT_STATUS, PHASE_MSGOUT):  /* Message Out  -> Status       */
@@ -1426,7 +1432,7 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne
 	case STATE(STAT_MESGIN, PHASE_DATAOUT): /* Data Out     -> Message In   */
 	case STATE(STAT_MESGIN, PHASE_DATAIN):  /* Data In      -> Message In   */
 		fas216_stoptransfer(info);
-		/* fall through */
+		fallthrough;
 
 	case STATE(STAT_MESGIN, PHASE_COMMAND):	/* Command	-> Message In	*/
 	case STATE(STAT_MESGIN, PHASE_SELSTEPS):/* Sel w/ steps -> Message In   */
@@ -1479,7 +1485,7 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne
 
 		if (msgqueue_msglength(&info->scsi.msgs) > 1)
 			fas216_cmd(info, CMD_SETATN);
-		/*FALLTHROUGH*/
+		fallthrough;
 
 	/*
 	 * Any          -> Message Out
@@ -1581,7 +1587,7 @@ static void fas216_funcdone_intr(FAS216_Info *info, unsigned int stat, unsigned
 			fas216_message(info);
 			break;
 		}
-		/* else, fall through */
+		fallthrough;
 
 	default:
 		fas216_log(info, 0, "internal phase %s for function done?"
@@ -1766,7 +1772,7 @@ static void fas216_start_command(FAS216_Info *info, struct scsi_cmnd *SCpnt)
 	 * claim host busy
 	 */
 	info->scsi.phase = PHASE_SELECTION;
-	info->scsi.SCp = SCpnt->SCp;
+	info->scsi.SCp = *arm_scsi_pointer(SCpnt);
 	info->SCpnt = SCpnt;
 	info->dma.transfer_type = fasdma_none;
 
@@ -1790,8 +1796,9 @@ static void fas216_start_command(FAS216_Info *info, struct scsi_cmnd *SCpnt)
 	/*
 	 * add tag message if required
 	 */
-	if (SCpnt->tag)
-		msgqueue_addmsg(&info->scsi.msgs, 2, SIMPLE_QUEUE_TAG, SCpnt->tag);
+	if (SCpnt->device->simple_tags)
+		msgqueue_addmsg(&info->scsi.msgs, 2, SIMPLE_QUEUE_TAG,
+				scsi_cmd_to_rq(SCpnt)->tag);
 
 	do {
 #ifdef SCSI2_SYNC
@@ -1814,20 +1821,8 @@ static void fas216_start_command(FAS216_Info *info, struct scsi_cmnd *SCpnt)
 
 static void fas216_allocate_tag(FAS216_Info *info, struct scsi_cmnd *SCpnt)
 {
-#ifdef SCSI2_TAG
-	/*
-	 * tagged queuing - allocate a new tag to this command
-	 */
-	if (SCpnt->device->simple_tags && SCpnt->cmnd[0] != REQUEST_SENSE &&
-	    SCpnt->cmnd[0] != INQUIRY) {
-	    SCpnt->device->current_tag += 1;
-		if (SCpnt->device->current_tag == 0)
-		    SCpnt->device->current_tag = 1;
-			SCpnt->tag = SCpnt->device->current_tag;
-	} else
-#endif
-		set_bit(SCpnt->device->id * 8 +
-			(u8)(SCpnt->device->lun & 0x7), info->busyluns);
+	set_bit(SCpnt->device->id * 8 +
+		(u8)(SCpnt->device->lun & 0x7), info->busyluns);
 
 	info->stats.removes += 1;
 	switch (SCpnt->cmnd[0]) {
@@ -1856,7 +1851,7 @@ static void fas216_do_bus_device_reset(FAS216_Info *info,
 	 * claim host busy
 	 */
 	info->scsi.phase = PHASE_SELECTION;
-	info->scsi.SCp = SCpnt->SCp;
+	info->scsi.SCp = *arm_scsi_pointer(SCpnt);
 	info->SCpnt = SCpnt;
 	info->dma.transfer_type = fasdma_none;
 
@@ -1964,7 +1959,7 @@ static void fas216_kick(FAS216_Info *info)
 	switch (where_from) {
 	case TYPE_QUEUE:
 		fas216_allocate_tag(info, SCpnt);
-		/* fall through */
+		fallthrough;
 	case TYPE_OTHER:
 		fas216_start_command(info, SCpnt);
 		break;
@@ -2006,11 +2001,13 @@ static void fas216_devicereset_done(FAS216_Info *info, struct scsi_cmnd *SCpnt,
 static void fas216_rq_sns_done(FAS216_Info *info, struct scsi_cmnd *SCpnt,
 			       unsigned int result)
 {
+	struct scsi_pointer *scsi_pointer = arm_scsi_pointer(SCpnt);
+
 	fas216_log_target(info, LOG_CONNECT, SCpnt->device->id,
 		   "request sense complete, result=0x%04x%02x%02x",
-		   result, SCpnt->SCp.Message, SCpnt->SCp.Status);
+		   result, scsi_pointer->Message, scsi_pointer->Status);
 
-	if (result != DID_OK || SCpnt->SCp.Status != GOOD)
+	if (result != DID_OK || scsi_pointer->Status != SAM_STAT_GOOD)
 		/*
 		 * Something went wrong.  Make sure that we don't
 		 * have valid data in the sense buffer that could
@@ -2026,7 +2023,7 @@ static void fas216_rq_sns_done(FAS216_Info *info, struct scsi_cmnd *SCpnt,
 	 * correctly by fas216_std_done.
 	 */
 	scsi_eh_restore_cmnd(SCpnt, &info->ses);
-	SCpnt->scsi_done(SCpnt);
+	fas216_cmd_priv(SCpnt)->scsi_done(SCpnt);
 }
 
 /**
@@ -2040,10 +2037,14 @@ static void fas216_rq_sns_done(FAS216_Info *info, struct scsi_cmnd *SCpnt,
 static void
 fas216_std_done(FAS216_Info *info, struct scsi_cmnd *SCpnt, unsigned int result)
 {
+	struct scsi_pointer *scsi_pointer = arm_scsi_pointer(SCpnt);
+
 	info->stats.fins += 1;
 
-	SCpnt->result = result << 16 | info->scsi.SCp.Message << 8 |
-			info->scsi.SCp.Status;
+	set_host_byte(SCpnt, result);
+	if (result == DID_OK)
+		scsi_msg_to_host_byte(SCpnt, info->scsi.SCp.Message);
+	set_status_byte(SCpnt, info->scsi.SCp.Status);
 
 	fas216_log_command(info, LOG_CONNECT, SCpnt,
 		"command complete, result=0x%08x", SCpnt->result);
@@ -2051,23 +2052,22 @@ fas216_std_done(FAS216_Info *info, struct scsi_cmnd *SCpnt, unsigned int result)
 	/*
 	 * If the driver detected an error, we're all done.
 	 */
-	if (host_byte(SCpnt->result) != DID_OK ||
-	    msg_byte(SCpnt->result) != COMMAND_COMPLETE)
+	if (get_host_byte(SCpnt) != DID_OK)
 		goto done;
 
 	/*
 	 * If the command returned CHECK_CONDITION or COMMAND_TERMINATED
 	 * status, request the sense information.
 	 */
-	if (status_byte(SCpnt->result) == CHECK_CONDITION ||
-	    status_byte(SCpnt->result) == COMMAND_TERMINATED)
+	if (get_status_byte(SCpnt) == SAM_STAT_CHECK_CONDITION ||
+	    get_status_byte(SCpnt) == SAM_STAT_COMMAND_TERMINATED)
 		goto request_sense;
 
 	/*
 	 * If the command did not complete with GOOD status,
 	 * we are all done here.
 	 */
-	if (status_byte(SCpnt->result) != GOOD)
+	if (get_status_byte(SCpnt) != SAM_STAT_GOOD)
 		goto done;
 
 	/*
@@ -2096,8 +2096,8 @@ fas216_std_done(FAS216_Info *info, struct scsi_cmnd *SCpnt, unsigned int result)
 	}
 
 done:
-	if (SCpnt->scsi_done) {
-		SCpnt->scsi_done(SCpnt);
+	if (fas216_cmd_priv(SCpnt)->scsi_done) {
+		fas216_cmd_priv(SCpnt)->scsi_done(SCpnt);
 		return;
 	}
 
@@ -2113,9 +2113,8 @@ request_sense:
 	fas216_log_target(info, LOG_CONNECT, SCpnt->device->id,
 			  "requesting sense");
 	init_SCp(SCpnt);
-	SCpnt->SCp.Message = 0;
-	SCpnt->SCp.Status = 0;
-	SCpnt->tag = 0;
+	scsi_pointer->Message = 0;
+	scsi_pointer->Status = 0;
 	SCpnt->host_scribble = (void *)fas216_rq_sns_done;
 
 	/*
@@ -2195,7 +2194,7 @@ no_command:
 }
 
 /**
- * fas216_queue_command - queue a command for adapter to process.
+ * fas216_queue_command_internal - queue a command for the adapter to process
  * @SCpnt: Command to queue
  * @done: done function to call once command is complete
  *
@@ -2203,8 +2202,8 @@ no_command:
  * Returns: 0 on success, else error.
  * Notes: io_request_lock is held, interrupts are disabled.
  */
-static int fas216_queue_command_lck(struct scsi_cmnd *SCpnt,
-			 void (*done)(struct scsi_cmnd *))
+static int fas216_queue_command_internal(struct scsi_cmnd *SCpnt,
+					 void (*done)(struct scsi_cmnd *))
 {
 	FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
 	int result;
@@ -2214,14 +2213,13 @@ static int fas216_queue_command_lck(struct scsi_cmnd *SCpnt,
 	fas216_log_command(info, LOG_CONNECT, SCpnt,
 			   "received command (%p)", SCpnt);
 
-	SCpnt->scsi_done = done;
+	fas216_cmd_priv(SCpnt)->scsi_done = done;
 	SCpnt->host_scribble = (void *)fas216_std_done;
 	SCpnt->result = 0;
 
 	init_SCp(SCpnt);
 
 	info->stats.queues += 1;
-	SCpnt->tag = 0;
 
 	spin_lock(&info->host_lock);
 
@@ -2245,6 +2243,11 @@ static int fas216_queue_command_lck(struct scsi_cmnd *SCpnt,
 	return result;
 }
 
+static int fas216_queue_command_lck(struct scsi_cmnd *SCpnt)
+{
+	return fas216_queue_command_internal(SCpnt, scsi_done);
+}
+
 DEF_SCSI_QCMD(fas216_queue_command)
 
 /**
@@ -2270,8 +2273,7 @@ static void fas216_internal_done(struct scsi_cmnd *SCpnt)
  * Returns: scsi result code.
  * Notes: io_request_lock is held, interrupts are disabled.
  */
-static int fas216_noqueue_command_lck(struct scsi_cmnd *SCpnt,
-			   void (*done)(struct scsi_cmnd *))
+static int fas216_noqueue_command_lck(struct scsi_cmnd *SCpnt)
 {
 	FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
 
@@ -2284,7 +2286,7 @@ static int fas216_noqueue_command_lck(struct scsi_cmnd *SCpnt,
 	BUG_ON(info->scsi.irq);
 
 	info->internal_done = 0;
-	fas216_queue_command_lck(SCpnt, fas216_internal_done);
+	fas216_queue_command_internal(SCpnt, fas216_internal_done);
 
 	/*
 	 * This wastes time, since we can't return until the command is
@@ -2312,7 +2314,7 @@ static int fas216_noqueue_command_lck(struct scsi_cmnd *SCpnt,
 
 	spin_lock_irq(info->host->host_lock);
 
-	done(SCpnt);
+	scsi_done(SCpnt);
 
 	return 0;
 }
@@ -2325,11 +2327,11 @@ DEF_SCSI_QCMD(fas216_noqueue_command)
  */
 static void fas216_eh_timer(struct timer_list *t)
 {
-	FAS216_Info *info = from_timer(info, t, eh_timer);
+	FAS216_Info *info = timer_container_of(info, t, eh_timer);
 
 	fas216_log(info, LOG_ERROR, "error handling timed out\n");
 
-	del_timer(&info->eh_timer);
+	timer_delete(&info->eh_timer);
 
 	if (info->rst_bus_status == 0)
 		info->rst_bus_status = -1;
@@ -2530,7 +2532,7 @@ int fas216_eh_device_reset(struct scsi_cmnd *SCpnt)
 		 */
 		wait_event(info->eh_wait, info->rst_dev_status);
 
-		del_timer_sync(&info->eh_timer);
+		timer_delete_sync(&info->eh_timer);
 		spin_lock_irqsave(&info->host_lock, flags);
 		info->rstSCpnt = NULL;
 
@@ -2620,7 +2622,7 @@ int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt)
 	 * Wait one second for the interrupt.
 	 */
 	wait_event(info->eh_wait, info->rst_bus_status);
-	del_timer_sync(&info->eh_timer);
+	timer_delete_sync(&info->eh_timer);
 
 	fas216_log(info, LOG_ERROR, "bus reset complete: %s\n",
 		   info->rst_bus_status == 1 ? "success" : "failed");
@@ -3001,9 +3003,8 @@ void fas216_print_devices(FAS216_Info *info, struct seq_file *m)
 		dev = &info->device[scd->id];
 		seq_printf(m, "     %d/%llu   ", scd->id, scd->lun);
 		if (scd->tagged_supported)
-			seq_printf(m, "%3sabled(%3d) ",
-				     scd->simple_tags ? "en" : "dis",
-				     scd->current_tag);
+			seq_printf(m, "%3sabled ",
+				     scd->simple_tags ? "en" : "dis");
 		else
 			seq_puts(m, "unsupported   ");