summaryrefslogtreecommitdiff
path: root/drivers/scsi/hpsa.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/hpsa.h')
-rw-r--r--drivers/scsi/hpsa.h171
1 files changed, 170 insertions, 1 deletions
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 01c328349c83..44235a27e1b6 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -1,6 +1,6 @@
/*
* Disk Array driver for HP Smart Array SAS controllers
- * Copyright 2000, 2009 Hewlett-Packard Development Company, L.P.
+ * Copyright 2000, 2014 Hewlett-Packard Development Company, L.P.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -46,6 +46,15 @@ struct hpsa_scsi_dev_t {
unsigned char vendor[8]; /* bytes 8-15 of inquiry data */
unsigned char model[16]; /* bytes 16-31 of inquiry data */
unsigned char raid_level; /* from inquiry page 0xC1 */
+ unsigned char volume_offline; /* discovered via TUR or VPD */
+ u32 ioaccel_handle;
+ int offload_config; /* I/O accel RAID offload configured */
+ int offload_enabled; /* I/O accel RAID offload enabled */
+ int offload_to_mirror; /* Send next I/O accelerator RAID
+ * offload request to mirror drive
+ */
+ struct raid_map_data raid_map; /* I/O accelerator RAID map */
+
};
struct reply_pool {
@@ -55,6 +64,46 @@ struct reply_pool {
u32 current_entry;
};
+#pragma pack(1)
+struct bmic_controller_parameters {
+ u8 led_flags;
+ u8 enable_command_list_verification;
+ u8 backed_out_write_drives;
+ u16 stripes_for_parity;
+ u8 parity_distribution_mode_flags;
+ u16 max_driver_requests;
+ u16 elevator_trend_count;
+ u8 disable_elevator;
+ u8 force_scan_complete;
+ u8 scsi_transfer_mode;
+ u8 force_narrow;
+ u8 rebuild_priority;
+ u8 expand_priority;
+ u8 host_sdb_asic_fix;
+ u8 pdpi_burst_from_host_disabled;
+ char software_name[64];
+ char hardware_name[32];
+ u8 bridge_revision;
+ u8 snapshot_priority;
+ u32 os_specific;
+ u8 post_prompt_timeout;
+ u8 automatic_drive_slamming;
+ u8 reserved1;
+ u8 nvram_flags;
+ u8 cache_nvram_flags;
+ u8 drive_config_flags;
+ u16 reserved2;
+ u8 temp_warning_level;
+ u8 temp_shutdown_level;
+ u8 temp_condition_reset;
+ u8 max_coalesce_commands;
+ u32 max_coalesce_delay;
+ u8 orca_password[4];
+ u8 access_id[16];
+ u8 reserved[356];
+};
+#pragma pack()
+
struct ctlr_info {
int ctlr;
char devname[8];
@@ -80,6 +129,7 @@ struct ctlr_info {
unsigned int msi_vector;
int intr_mode; /* either PERF_MODE_INT or SIMPLE_MODE_INT */
struct access_method access;
+ char hba_mode_enabled;
/* queue and queue Info */
struct list_head reqQ;
@@ -95,6 +145,10 @@ struct ctlr_info {
/* pointers to command and error info pool */
struct CommandList *cmd_pool;
dma_addr_t cmd_pool_dhandle;
+ struct io_accel1_cmd *ioaccel_cmd_pool;
+ dma_addr_t ioaccel_cmd_pool_dhandle;
+ struct io_accel2_cmd *ioaccel2_cmd_pool;
+ dma_addr_t ioaccel2_cmd_pool_dhandle;
struct ErrorInfo *errinfo_pool;
dma_addr_t errinfo_pool_dhandle;
unsigned long *cmd_pool_bits;
@@ -128,7 +182,14 @@ struct ctlr_info {
u8 nreply_queues;
dma_addr_t reply_pool_dhandle;
u32 *blockFetchTable;
+ u32 *ioaccel1_blockFetchTable;
+ u32 *ioaccel2_blockFetchTable;
+ u32 *ioaccel2_bft2_regs;
unsigned char *hba_inquiry_data;
+ u32 driver_support;
+ u32 fw_support;
+ int ioaccel_support;
+ int ioaccel_maxsg;
u64 last_intr_timestamp;
u32 last_heartbeat;
u64 last_heartbeat_timestamp;
@@ -161,7 +222,35 @@ struct ctlr_info {
#define HPSATMF_LOG_QRY_TASK (1 << 23)
#define HPSATMF_LOG_QRY_TSET (1 << 24)
#define HPSATMF_LOG_QRY_ASYNC (1 << 25)
+ u32 events;
+#define CTLR_STATE_CHANGE_EVENT (1 << 0)
+#define CTLR_ENCLOSURE_HOT_PLUG_EVENT (1 << 1)
+#define CTLR_STATE_CHANGE_EVENT_PHYSICAL_DRV (1 << 4)
+#define CTLR_STATE_CHANGE_EVENT_LOGICAL_DRV (1 << 5)
+#define CTLR_STATE_CHANGE_EVENT_REDUNDANT_CNTRL (1 << 6)
+#define CTLR_STATE_CHANGE_EVENT_AIO_ENABLED_DISABLED (1 << 30)
+#define CTLR_STATE_CHANGE_EVENT_AIO_CONFIG_CHANGE (1 << 31)
+
+#define RESCAN_REQUIRED_EVENT_BITS \
+ (CTLR_STATE_CHANGE_EVENT | \
+ CTLR_ENCLOSURE_HOT_PLUG_EVENT | \
+ CTLR_STATE_CHANGE_EVENT_PHYSICAL_DRV | \
+ CTLR_STATE_CHANGE_EVENT_LOGICAL_DRV | \
+ CTLR_STATE_CHANGE_EVENT_REDUNDANT_CNTRL | \
+ CTLR_STATE_CHANGE_EVENT_AIO_ENABLED_DISABLED | \
+ CTLR_STATE_CHANGE_EVENT_AIO_CONFIG_CHANGE)
+ spinlock_t offline_device_lock;
+ struct list_head offline_device_list;
+ int acciopath_status;
+ int drv_req_rescan; /* flag for driver to request rescan event */
+ int raid_offload_debug;
};
+
+struct offline_device_entry {
+ unsigned char scsi3addr[8];
+ struct list_head offline_list;
+};
+
#define HPSA_ABORT_MSG 0
#define HPSA_DEVICE_RESET_MSG 1
#define HPSA_RESET_TYPE_CONTROLLER 0x00
@@ -242,6 +331,14 @@ struct ctlr_info {
#define HPSA_INTR_ON 1
#define HPSA_INTR_OFF 0
+
+/*
+ * Inbound Post Queue offsets for IO Accelerator Mode 2
+ */
+#define IOACCEL2_INBOUND_POSTQ_32 0x48
+#define IOACCEL2_INBOUND_POSTQ_64_LOW 0xd0
+#define IOACCEL2_INBOUND_POSTQ_64_HI 0xd4
+
/*
Send the command to the hardware
*/
@@ -254,6 +351,18 @@ static void SA5_submit_command(struct ctlr_info *h,
(void) readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
}
+static void SA5_submit_command_ioaccel2(struct ctlr_info *h,
+ struct CommandList *c)
+{
+ dev_dbg(&h->pdev->dev, "Sending %x, tag = %x\n", c->busaddr,
+ c->Header.Tag.lower);
+ if (c->cmd_type == CMD_IOACCEL2)
+ writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32);
+ else
+ writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
+ (void) readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
+}
+
/*
* This card is the opposite of the other cards.
* 0 turns interrupts on...
@@ -387,6 +496,50 @@ static bool SA5_performant_intr_pending(struct ctlr_info *h)
return register_value & SA5_OUTDB_STATUS_PERF_BIT;
}
+#define SA5_IOACCEL_MODE1_INTR_STATUS_CMP_BIT 0x100
+
+static bool SA5_ioaccel_mode1_intr_pending(struct ctlr_info *h)
+{
+ unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);
+
+ return (register_value & SA5_IOACCEL_MODE1_INTR_STATUS_CMP_BIT) ?
+ true : false;
+}
+
+#define IOACCEL_MODE1_REPLY_QUEUE_INDEX 0x1A0
+#define IOACCEL_MODE1_PRODUCER_INDEX 0x1B8
+#define IOACCEL_MODE1_CONSUMER_INDEX 0x1BC
+#define IOACCEL_MODE1_REPLY_UNUSED 0xFFFFFFFFFFFFFFFFULL
+
+static unsigned long SA5_ioaccel_mode1_completed(struct ctlr_info *h, u8 q)
+{
+ u64 register_value;
+ struct reply_pool *rq = &h->reply_queue[q];
+ unsigned long flags;
+
+ BUG_ON(q >= h->nreply_queues);
+
+ register_value = rq->head[rq->current_entry];
+ if (register_value != IOACCEL_MODE1_REPLY_UNUSED) {
+ rq->head[rq->current_entry] = IOACCEL_MODE1_REPLY_UNUSED;
+ if (++rq->current_entry == rq->size)
+ rq->current_entry = 0;
+ /*
+ * @todo
+ *
+ * Don't really need to write the new index after each command,
+ * but with current driver design this is easiest.
+ */
+ wmb();
+ writel((q << 24) | rq->current_entry, h->vaddr +
+ IOACCEL_MODE1_CONSUMER_INDEX);
+ spin_lock_irqsave(&h->lock, flags);
+ h->commands_outstanding--;
+ spin_unlock_irqrestore(&h->lock, flags);
+ }
+ return (unsigned long) register_value;
+}
+
static struct access_method SA5_access = {
SA5_submit_command,
SA5_intr_mask,
@@ -395,6 +548,22 @@ static struct access_method SA5_access = {
SA5_completed,
};
+static struct access_method SA5_ioaccel_mode1_access = {
+ SA5_submit_command,
+ SA5_performant_intr_mask,
+ SA5_fifo_full,
+ SA5_ioaccel_mode1_intr_pending,
+ SA5_ioaccel_mode1_completed,
+};
+
+static struct access_method SA5_ioaccel_mode2_access = {
+ SA5_submit_command_ioaccel2,
+ SA5_performant_intr_mask,
+ SA5_fifo_full,
+ SA5_performant_intr_pending,
+ SA5_performant_completed,
+};
+
static struct access_method SA5_performant_access = {
SA5_submit_command,
SA5_performant_intr_mask,