summaryrefslogtreecommitdiff
path: root/drivers/scsi/hpsa_cmd.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/hpsa_cmd.h')
-rw-r--r--drivers/scsi/hpsa_cmd.h270
1 files changed, 261 insertions, 9 deletions
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index bfc8c4ea66f8..b5cc7052339f 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -1,6 +1,6 @@
/*
* Disk Array driver for HP Smart Array SAS controllers
- * Copyright 2000, 2009 Hewlett-Packard Development Company, L.P.
+ * Copyright 2000, 2014 Hewlett-Packard Development Company, L.P.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -25,6 +25,7 @@
#define SENSEINFOBYTES 32 /* may vary between hbas */
#define SG_ENTRIES_IN_CMD 32 /* Max SG entries excluding chain blocks */
#define HPSA_SG_CHAIN 0x80000000
+#define HPSA_SG_LAST 0x40000000
#define MAXREPLYQS 256
/* Command Status value */
@@ -41,6 +42,8 @@
#define CMD_UNSOLICITED_ABORT 0x000A
#define CMD_TIMEOUT 0x000B
#define CMD_UNABORTABLE 0x000C
+#define CMD_IOACCEL_DISABLED 0x000E
+
/* Unit Attentions ASC's as defined for the MSA2012sa */
#define POWER_OR_RESET 0x29
@@ -79,8 +82,9 @@
#define ATTR_ACA 0x07
/* cdb type */
-#define TYPE_CMD 0x00
-#define TYPE_MSG 0x01
+#define TYPE_CMD 0x00
+#define TYPE_MSG 0x01
+#define TYPE_IOACCEL2_CMD 0x81 /* 0x81 is not used by hardware */
/* Message Types */
#define HPSA_TASK_MANAGEMENT 0x00
@@ -125,9 +129,12 @@
#define CFGTBL_AccCmds 0x00000001l
#define DOORBELL_CTLR_RESET 0x00000004l
#define DOORBELL_CTLR_RESET2 0x00000020l
+#define DOORBELL_CLEAR_EVENTS 0x00000040l
#define CFGTBL_Trans_Simple 0x00000002l
#define CFGTBL_Trans_Performant 0x00000004l
+#define CFGTBL_Trans_io_accel1 0x00000080l
+#define CFGTBL_Trans_io_accel2 0x00000100l
#define CFGTBL_Trans_use_short_tags 0x20000000l
#define CFGTBL_Trans_enable_directed_msix (1 << 30)
@@ -135,6 +142,28 @@
#define CFGTBL_BusType_Ultra3 0x00000002l
#define CFGTBL_BusType_Fibre1G 0x00000100l
#define CFGTBL_BusType_Fibre2G 0x00000200l
+
+/* VPD Inquiry types */
+#define HPSA_VPD_SUPPORTED_PAGES 0x00
+#define HPSA_VPD_LV_DEVICE_GEOMETRY 0xC1
+#define HPSA_VPD_LV_IOACCEL_STATUS 0xC2
+#define HPSA_VPD_LV_STATUS 0xC3
+#define HPSA_VPD_HEADER_SZ 4
+
+/* Logical volume states */
+#define HPSA_VPD_LV_STATUS_UNSUPPORTED -1
+#define HPSA_LV_OK 0x0
+#define HPSA_LV_UNDERGOING_ERASE 0x0F
+#define HPSA_LV_UNDERGOING_RPI 0x12
+#define HPSA_LV_PENDING_RPI 0x13
+#define HPSA_LV_ENCRYPTED_NO_KEY 0x14
+#define HPSA_LV_PLAINTEXT_IN_ENCRYPT_ONLY_CONTROLLER 0x15
+#define HPSA_LV_UNDERGOING_ENCRYPTION 0x16
+#define HPSA_LV_UNDERGOING_ENCRYPTION_REKEYING 0x17
+#define HPSA_LV_ENCRYPTED_IN_NON_ENCRYPTED_CONTROLLER 0x18
+#define HPSA_LV_PENDING_ENCRYPTION 0x19
+#define HPSA_LV_PENDING_ENCRYPTION_REKEYING 0x1A
+
struct vals32 {
u32 lower;
u32 upper;
@@ -162,9 +191,50 @@ struct InquiryData {
#define HPSA_REPORT_LOG 0xc2 /* Report Logical LUNs */
#define HPSA_REPORT_PHYS 0xc3 /* Report Physical LUNs */
+#define HPSA_REPORT_PHYS_EXTENDED 0x02
+#define HPSA_CISS_READ 0xc0 /* CISS Read */
+#define HPSA_GET_RAID_MAP 0xc8 /* CISS Get RAID Layout Map */
+
+#define RAID_MAP_MAX_ENTRIES 256
+
+struct raid_map_disk_data {
+ u32 ioaccel_handle; /**< Handle to access this disk via the
+ * I/O accelerator */
+ u8 xor_mult[2]; /**< XOR multipliers for this position,
+ * valid for data disks only */
+ u8 reserved[2];
+};
+
+struct raid_map_data {
+ u32 structure_size; /* Size of entire structure in bytes */
+ u32 volume_blk_size; /* bytes / block in the volume */
+ u64 volume_blk_cnt; /* logical blocks on the volume */
+ u8 phys_blk_shift; /* Shift factor to convert between
+ * units of logical blocks and physical
+ * disk blocks */
+ u8 parity_rotation_shift; /* Shift factor to convert between units
+ * of logical stripes and physical
+ * stripes */
+ u16 strip_size; /* blocks used on each disk / stripe */
+ u64 disk_starting_blk; /* First disk block used in volume */
+ u64 disk_blk_cnt; /* disk blocks used by volume / disk */
+ u16 data_disks_per_row; /* data disk entries / row in the map */
+ u16 metadata_disks_per_row; /* mirror/parity disk entries / row
+ * in the map */
+ u16 row_cnt; /* rows in each layout map */
+ u16 layout_map_count; /* layout maps (1 map per mirror/parity
+ * group) */
+ u16 flags; /* Bit 0 set if encryption enabled */
+#define RAID_MAP_FLAG_ENCRYPT_ON 0x01
+ u16 dekindex; /* Data encryption key index. */
+ u8 reserved[16];
+ struct raid_map_disk_data data[RAID_MAP_MAX_ENTRIES];
+};
+
struct ReportLUNdata {
u8 LUNListLength[4];
- u32 reserved;
+ u8 extended_response_flag;
+ u8 reserved[3];
u8 LUN[HPSA_MAX_LUN][8];
};
@@ -187,6 +257,7 @@ struct SenseSubsystem_info {
#define BMIC_CACHE_FLUSH 0xc2
#define HPSA_CACHE_FLUSH 0x01 /* C2 was already being used by HPSA */
#define BMIC_FLASH_FIRMWARE 0xF7
+#define BMIC_SENSE_CONTROLLER_PARAMETERS 0x64
/* Command List Structure */
union SCSI3Addr {
@@ -283,6 +354,8 @@ struct ErrorInfo {
/* Command types */
#define CMD_IOCTL_PEND 0x01
#define CMD_SCSI 0x03
+#define CMD_IOACCEL1 0x04
+#define CMD_IOACCEL2 0x05
#define DIRECT_LOOKUP_SHIFT 5
#define DIRECT_LOOKUP_BIT 0x10
@@ -314,7 +387,6 @@ struct CommandList {
int cmd_type;
long cmdindex;
struct list_head list;
- struct request *rq;
struct completion *waiting;
void *scsi_cmd;
@@ -327,16 +399,183 @@ struct CommandList {
*/
#define IS_32_BIT ((8 - sizeof(long))/4)
#define IS_64_BIT (!IS_32_BIT)
-#define PAD_32 (4)
-#define PAD_64 (4)
+#define PAD_32 (40)
+#define PAD_64 (12)
#define COMMANDLIST_PAD (IS_32_BIT * PAD_32 + IS_64_BIT * PAD_64)
u8 pad[COMMANDLIST_PAD];
};
+/* Max S/G elements in I/O accelerator command */
+#define IOACCEL1_MAXSGENTRIES 24
+#define IOACCEL2_MAXSGENTRIES 28
+
+/*
+ * Structure for I/O accelerator (mode 1) commands.
+ * Note that this structure must be 128-byte aligned in size.
+ */
+struct io_accel1_cmd {
+ u16 dev_handle; /* 0x00 - 0x01 */
+ u8 reserved1; /* 0x02 */
+ u8 function; /* 0x03 */
+ u8 reserved2[8]; /* 0x04 - 0x0B */
+ u32 err_info; /* 0x0C - 0x0F */
+ u8 reserved3[2]; /* 0x10 - 0x11 */
+ u8 err_info_len; /* 0x12 */
+ u8 reserved4; /* 0x13 */
+ u8 sgl_offset; /* 0x14 */
+ u8 reserved5[7]; /* 0x15 - 0x1B */
+ u32 transfer_len; /* 0x1C - 0x1F */
+ u8 reserved6[4]; /* 0x20 - 0x23 */
+ u16 io_flags; /* 0x24 - 0x25 */
+ u8 reserved7[14]; /* 0x26 - 0x33 */
+ u8 LUN[8]; /* 0x34 - 0x3B */
+ u32 control; /* 0x3C - 0x3F */
+ u8 CDB[16]; /* 0x40 - 0x4F */
+ u8 reserved8[16]; /* 0x50 - 0x5F */
+ u16 host_context_flags; /* 0x60 - 0x61 */
+ u16 timeout_sec; /* 0x62 - 0x63 */
+ u8 ReplyQueue; /* 0x64 */
+ u8 reserved9[3]; /* 0x65 - 0x67 */
+ struct vals32 Tag; /* 0x68 - 0x6F */
+ struct vals32 host_addr; /* 0x70 - 0x77 */
+ u8 CISS_LUN[8]; /* 0x78 - 0x7F */
+ struct SGDescriptor SG[IOACCEL1_MAXSGENTRIES];
+#define IOACCEL1_PAD_64 0
+#define IOACCEL1_PAD_32 0
+#define IOACCEL1_PAD (IS_32_BIT * IOACCEL1_PAD_32 + \
+ IS_64_BIT * IOACCEL1_PAD_64)
+ u8 pad[IOACCEL1_PAD];
+};
+
+#define IOACCEL1_FUNCTION_SCSIIO 0x00
+#define IOACCEL1_SGLOFFSET 32
+
+#define IOACCEL1_IOFLAGS_IO_REQ 0x4000
+#define IOACCEL1_IOFLAGS_CDBLEN_MASK 0x001F
+#define IOACCEL1_IOFLAGS_CDBLEN_MAX 16
+
+#define IOACCEL1_CONTROL_NODATAXFER 0x00000000
+#define IOACCEL1_CONTROL_DATA_OUT 0x01000000
+#define IOACCEL1_CONTROL_DATA_IN 0x02000000
+#define IOACCEL1_CONTROL_TASKPRIO_MASK 0x00007800
+#define IOACCEL1_CONTROL_TASKPRIO_SHIFT 11
+#define IOACCEL1_CONTROL_SIMPLEQUEUE 0x00000000
+#define IOACCEL1_CONTROL_HEADOFQUEUE 0x00000100
+#define IOACCEL1_CONTROL_ORDEREDQUEUE 0x00000200
+#define IOACCEL1_CONTROL_ACA 0x00000400
+
+#define IOACCEL1_HCFLAGS_CISS_FORMAT 0x0013
+
+#define IOACCEL1_BUSADDR_CMDTYPE 0x00000060
+
+struct ioaccel2_sg_element {
+ u64 address;
+ u32 length;
+ u8 reserved[3];
+ u8 chain_indicator;
+#define IOACCEL2_CHAIN 0x80
+};
+
+/*
+ * SCSI Response Format structure for IO Accelerator Mode 2
+ */
+struct io_accel2_scsi_response {
+ u8 IU_type;
+#define IOACCEL2_IU_TYPE_SRF 0x60
+ u8 reserved1[3];
+ u8 req_id[4]; /* request identifier */
+ u8 reserved2[4];
+ u8 serv_response; /* service response */
+#define IOACCEL2_SERV_RESPONSE_COMPLETE 0x000
+#define IOACCEL2_SERV_RESPONSE_FAILURE 0x001
+#define IOACCEL2_SERV_RESPONSE_TMF_COMPLETE 0x002
+#define IOACCEL2_SERV_RESPONSE_TMF_SUCCESS 0x003
+#define IOACCEL2_SERV_RESPONSE_TMF_REJECTED 0x004
+#define IOACCEL2_SERV_RESPONSE_TMF_WRONG_LUN 0x005
+ u8 status; /* status */
+#define IOACCEL2_STATUS_SR_TASK_COMP_GOOD 0x00
+#define IOACCEL2_STATUS_SR_TASK_COMP_CHK_COND 0x02
+#define IOACCEL2_STATUS_SR_TASK_COMP_BUSY 0x08
+#define IOACCEL2_STATUS_SR_TASK_COMP_RES_CON 0x18
+#define IOACCEL2_STATUS_SR_TASK_COMP_SET_FULL 0x28
+#define IOACCEL2_STATUS_SR_TASK_COMP_ABORTED 0x40
+#define IOACCEL2_STATUS_SR_IOACCEL_DISABLED 0x0E
+ u8 data_present; /* low 2 bits */
+#define IOACCEL2_NO_DATAPRESENT 0x000
+#define IOACCEL2_RESPONSE_DATAPRESENT 0x001
+#define IOACCEL2_SENSE_DATA_PRESENT 0x002
+#define IOACCEL2_RESERVED 0x003
+ u8 sense_data_len; /* sense/response data length */
+ u8 resid_cnt[4]; /* residual count */
+ u8 sense_data_buff[32]; /* sense/response data buffer */
+};
+
+#define IOACCEL2_64_PAD 76
+#define IOACCEL2_32_PAD 76
+#define IOACCEL2_PAD (IS_32_BIT * IOACCEL2_32_PAD + \
+ IS_64_BIT * IOACCEL2_64_PAD)
+/*
+ * Structure for I/O accelerator (mode 2 or m2) commands.
+ * Note that this structure must be 128-byte aligned in size.
+ */
+struct io_accel2_cmd {
+ u8 IU_type; /* IU Type */
+ u8 direction; /* direction, memtype, and encryption */
+#define IOACCEL2_DIRECTION_MASK 0x03 /* bits 0,1: direction */
+#define IOACCEL2_DIRECTION_MEMTYPE_MASK 0x04 /* bit 2: memtype source/dest */
+ /* 0b=PCIe, 1b=DDR */
+#define IOACCEL2_DIRECTION_ENCRYPT_MASK 0x08 /* bit 3: encryption flag */
+ /* 0=off, 1=on */
+ u8 reply_queue; /* Reply Queue ID */
+ u8 reserved1; /* Reserved */
+ u32 scsi_nexus; /* Device Handle */
+ u32 Tag; /* cciss tag, lower 4 bytes only */
+ u32 tweak_lower; /* Encryption tweak, lower 4 bytes */
+ u8 cdb[16]; /* SCSI Command Descriptor Block */
+ u8 cciss_lun[8]; /* 8 byte SCSI address */
+ u32 data_len; /* Total bytes to transfer */
+ u8 cmd_priority_task_attr; /* priority and task attrs */
+#define IOACCEL2_PRIORITY_MASK 0x78
+#define IOACCEL2_ATTR_MASK 0x07
+ u8 sg_count; /* Number of sg elements */
+ u16 dekindex; /* Data encryption key index */
+ u64 err_ptr; /* Error Pointer */
+ u32 err_len; /* Error Length*/
+ u32 tweak_upper; /* Encryption tweak, upper 4 bytes */
+ struct ioaccel2_sg_element sg[IOACCEL2_MAXSGENTRIES];
+ struct io_accel2_scsi_response error_data;
+ u8 pad[IOACCEL2_PAD];
+};
+
+/*
+ * defines for Mode 2 command struct
+ * FIXME: this can't be all I need mfm
+ */
+#define IOACCEL2_IU_TYPE 0x40
+#define IOACCEL2_IU_TMF_TYPE 0x41
+#define IOACCEL2_DIR_NO_DATA 0x00
+#define IOACCEL2_DIR_DATA_IN 0x01
+#define IOACCEL2_DIR_DATA_OUT 0x02
+/*
+ * SCSI Task Management Request format for Accelerator Mode 2
+ */
+struct hpsa_tmf_struct {
+ u8 iu_type; /* Information Unit Type */
+ u8 reply_queue; /* Reply Queue ID */
+ u8 tmf; /* Task Management Function */
+ u8 reserved1; /* byte 3 Reserved */
+ u32 it_nexus; /* SCSI I-T Nexus */
+ u8 lun_id[8]; /* LUN ID for TMF request */
+ struct vals32 Tag; /* cciss tag associated w/ request */
+ struct vals32 abort_tag;/* cciss tag of SCSI cmd or task to abort */
+ u64 error_ptr; /* Error Pointer */
+ u32 error_len; /* Error Length */
+};
+
/* Configuration Table Structure */
struct HostWrite {
u32 TransportRequest;
- u32 Reserved;
+ u32 command_pool_addr_hi;
u32 CoalIntDelay;
u32 CoalIntCount;
};
@@ -344,6 +583,9 @@ struct HostWrite {
#define SIMPLE_MODE 0x02
#define PERFORMANT_MODE 0x04
#define MEMQ_MODE 0x08
+#define IOACCEL_MODE_1 0x80
+
+#define DRIVER_SUPPORT_UA_ENABLE 0x00000001
struct CfgTable {
u8 Signature[4];
@@ -373,8 +615,18 @@ struct CfgTable {
u32 misc_fw_support; /* offset 0x78 */
#define MISC_FW_DOORBELL_RESET (0x02)
#define MISC_FW_DOORBELL_RESET2 (0x010)
+#define MISC_FW_RAID_OFFLOAD_BASIC (0x020)
+#define MISC_FW_EVENT_NOTIFY (0x080)
u8 driver_version[32];
-
+ u32 max_cached_write_size;
+ u8 driver_scratchpad[16];
+ u32 max_error_info_length;
+ u32 io_accel_max_embedded_sg_count;
+ u32 io_accel_request_size_offset;
+ u32 event_notify;
+#define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE (1 << 30)
+#define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE (1 << 31)
+ u32 clear_event_notify;
};
#define NUM_BLOCKFETCH_ENTRIES 8