diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_bsg.h')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_bsg.h | 144 |
1 files changed, 130 insertions, 14 deletions
diff --git a/drivers/scsi/lpfc/lpfc_bsg.h b/drivers/scsi/lpfc/lpfc_bsg.h index 67f7d0a160d1..27e7a033b53d 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.h +++ b/drivers/scsi/lpfc/lpfc_bsg.h @@ -1,9 +1,11 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2010-2012 Emulex. All rights reserved. * + * Copyright (C) 2017-2024 Broadcom. All Rights Reserved. The term * + * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. * + * Copyright (C) 2010-2015 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * - * www.emulex.com * + * www.broadcom.com * * * * This program is free software; you can redistribute it and/or * * modify it under the terms of version 2 of the GNU General * @@ -31,10 +33,15 @@ #define LPFC_BSG_VENDOR_DIAG_RUN_LOOPBACK 5 #define LPFC_BSG_VENDOR_GET_MGMT_REV 6 #define LPFC_BSG_VENDOR_MBOX 7 -#define LPFC_BSG_VENDOR_MENLO_CMD 8 -#define LPFC_BSG_VENDOR_MENLO_DATA 9 #define LPFC_BSG_VENDOR_DIAG_MODE_END 10 #define LPFC_BSG_VENDOR_LINK_DIAG_TEST 11 +#define LPFC_BSG_VENDOR_FORCED_LINK_SPEED 14 +#define LPFC_BSG_VENDOR_RAS_GET_LWPD 16 +#define LPFC_BSG_VENDOR_RAS_GET_FWLOG 17 +#define LPFC_BSG_VENDOR_RAS_GET_CONFIG 18 +#define LPFC_BSG_VENDOR_RAS_SET_CONFIG 19 +#define LPFC_BSG_VENDOR_GET_TRUNK_INFO 20 +#define LPFC_BSG_VENDOR_GET_CGNBUF_INFO 21 struct set_ct_event { uint32_t command; @@ -60,6 +67,7 @@ struct send_mgmt_resp { }; +#define DISABLE_LOOP_BACK 0x0 /* disables loop back */ #define INTERNAL_LOOP_BACK 0x1 /* adapter short cuts the loop internally */ #define EXTERNAL_LOOP_BACK 0x2 /* requires an external loopback plug */ @@ -67,6 +75,7 @@ struct diag_mode_set { uint32_t command; uint32_t type; uint32_t timeout; + uint32_t physical_link; }; struct sli4_link_diag { @@ -120,16 +129,6 @@ struct dfc_mbox_req { uint32_t extSeqNum; }; -/* Used for menlo command or menlo data. The xri is only used for menlo data */ -struct menlo_command { - uint32_t cmd; - uint32_t xri; -}; - -struct menlo_response { - uint32_t xri; /* return the xri of the iocb exchange */ -}; - /* * macros and data structures for handling sli-config mailbox command * pass-through support, this header file is shared between user and @@ -215,6 +214,10 @@ struct lpfc_sli_config_hdr { uint32_t reserved5; }; +#define LPFC_CSF_BOOT_DEV 0x1D +#define LPFC_CSF_QUERY 0 +#define LPFC_CSF_SAVE 1 + struct lpfc_sli_config_emb0_subsys { struct lpfc_sli_config_hdr sli_config_hdr; #define LPFC_MBX_SLI_CONFIG_MAX_MSE 19 @@ -231,6 +234,32 @@ struct lpfc_sli_config_emb0_subsys { #define SLI_CONFIG_SUBSYS_FCOE 0x0C #define FCOE_OPCODE_READ_FCF 0x08 #define FCOE_OPCODE_ADD_FCF 0x09 +#define FCOE_OPCODE_SET_DPORT_MODE 0x27 +#define FCOE_OPCODE_GET_DPORT_RESULTS 0x28 + uint32_t timeout; /* comn_set_feature timeout */ + uint32_t request_length; /* comn_set_feature request len */ + uint32_t version; /* comn_set_feature version */ + uint32_t word68; /* comn_set_feature feature */ +#define lpfc_emb0_subcmnd_csf_feat_SHIFT 0 +#define lpfc_emb0_subcmnd_csf_feat_MASK 0xffffffff +#define lpfc_emb0_subcmnd_csf_feat_WORD word68 +#define lpfc_emb0_subcmnd_rd_obj_des_rd_len_SHIFT 0 +#define lpfc_emb0_subcmnd_rd_obj_des_rd_len_MASK 0x00ffffff +#define lpfc_emb0_subcmnd_rd_obj_des_rd_len_WORD word68 + uint32_t word69; /* comn_set_feature parameter len */ + uint32_t word70; /* comn_set_feature parameter val0 */ +#define lpfc_emb0_subcmnd_csf_p0_SHIFT 0 +#define lpfc_emb0_subcmnd_csf_p0_MASK 0x3 +#define lpfc_emb0_subcmnd_csf_p0_WORD word70 + uint32_t reserved71[25]; + uint32_t word96; /* rd_obj hbd_count */ +#define lpfc_emb0_subcmnd_rd_obj_hbd_cnt_SHIFT 0 +#define lpfc_emb0_subcmnd_rd_obj_hbd_cnt_MASK 0xffffffff +#define lpfc_emb0_subcmnd_rd_obj_hbd_cnt_WORD word96 +#define LPFC_EMB0_MAX_RD_OBJ_HBD_CNT 31 + struct lpfc_sli_config_hbd hbd[LPFC_EMB0_MAX_RD_OBJ_HBD_CNT]; + uint32_t word190; + uint32_t word191; }; struct lpfc_sli_config_emb1_subsys { @@ -244,10 +273,12 @@ struct lpfc_sli_config_emb1_subsys { #define lpfc_emb1_subcmnd_subsys_WORD word6 /* Subsystem COMN (0x01) OpCodes */ #define SLI_CONFIG_SUBSYS_COMN 0x01 +#define COMN_OPCODE_GET_PROFILE_CONFIG 0xA4 #define COMN_OPCODE_READ_OBJECT 0xAB #define COMN_OPCODE_WRITE_OBJECT 0xAC #define COMN_OPCODE_READ_OBJECT_LIST 0xAD #define COMN_OPCODE_DELETE_OBJECT 0xAE +#define COMN_OPCODE_SET_FEATURES 0xBF #define COMN_OPCODE_GET_CNTL_ADDL_ATTRIBUTES 0x79 #define COMN_OPCODE_GET_CNTL_ATTRIBUTES 0x20 uint32_t timeout; @@ -281,6 +312,91 @@ struct lpfc_sli_config_mbox { } un; }; +#define LPFC_FORCED_LINK_SPEED_NOT_SUPPORTED 0 +#define LPFC_FORCED_LINK_SPEED_SUPPORTED 1 +struct get_forced_link_speed_support { + uint32_t command; +}; +struct forced_link_speed_support_reply { + uint8_t supported; +}; + +struct lpfc_bsg_ras_req { + uint32_t command; +}; + +struct lpfc_bsg_get_fwlog_req { + uint32_t command; + uint32_t read_size; + uint32_t read_offset; +}; + +struct lpfc_bsg_get_ras_lwpd { + uint32_t offset; + uint32_t wrap_count; +}; + +struct lpfc_bsg_set_ras_config_req { + uint32_t command; + uint8_t action; +#define LPFC_RASACTION_STOP_LOGGING 0x00 +#define LPFC_RASACTION_START_LOGGING 0x01 + uint8_t log_level; +}; + +struct lpfc_bsg_get_ras_config_reply { + uint8_t state; +#define LPFC_RASLOG_STATE_STOPPED 0x00 +#define LPFC_RASLOG_STATE_RUNNING 0x01 + uint8_t log_level; + uint32_t log_buff_sz; +}; + +struct lpfc_trunk_info { + uint32_t word0; +#define lpfc_trunk_info_link_status_SHIFT 0 +#define lpfc_trunk_info_link_status_MASK 1 +#define lpfc_trunk_info_link_status_WORD word0 +#define lpfc_trunk_info_trunk_active0_SHIFT 8 +#define lpfc_trunk_info_trunk_active0_MASK 1 +#define lpfc_trunk_info_trunk_active0_WORD word0 +#define lpfc_trunk_info_trunk_active1_SHIFT 9 +#define lpfc_trunk_info_trunk_active1_MASK 1 +#define lpfc_trunk_info_trunk_active1_WORD word0 +#define lpfc_trunk_info_trunk_active2_SHIFT 10 +#define lpfc_trunk_info_trunk_active2_MASK 1 +#define lpfc_trunk_info_trunk_active2_WORD word0 +#define lpfc_trunk_info_trunk_active3_SHIFT 11 +#define lpfc_trunk_info_trunk_active3_MASK 1 +#define lpfc_trunk_info_trunk_active3_WORD word0 +#define lpfc_trunk_info_trunk_config0_SHIFT 12 +#define lpfc_trunk_info_trunk_config0_MASK 1 +#define lpfc_trunk_info_trunk_config0_WORD word0 +#define lpfc_trunk_info_trunk_config1_SHIFT 13 +#define lpfc_trunk_info_trunk_config1_MASK 1 +#define lpfc_trunk_info_trunk_config1_WORD word0 +#define lpfc_trunk_info_trunk_config2_SHIFT 14 +#define lpfc_trunk_info_trunk_config2_MASK 1 +#define lpfc_trunk_info_trunk_config2_WORD word0 +#define lpfc_trunk_info_trunk_config3_SHIFT 15 +#define lpfc_trunk_info_trunk_config3_MASK 1 +#define lpfc_trunk_info_trunk_config3_WORD word0 + uint16_t port_speed; + uint16_t logical_speed; + uint32_t reserved3; +}; + +struct get_trunk_info_req { + uint32_t command; +}; + +struct get_cgnbuf_info_req { + uint32_t command; + uint32_t read_size; + uint32_t reset; +#define LPFC_BSG_CGN_RESET_STAT 1 +}; + /* driver only */ #define SLI_CONFIG_NOT_HANDLED 0 #define SLI_CONFIG_HANDLED 1 |