diff options
Diffstat (limited to 'drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h')
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 1033 |
1 files changed, 856 insertions, 177 deletions
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h index 889aa7067899..02bf26ca976e 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h @@ -1,12 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* - * Copyright (c) 2000-2013 LSI Corporation. + * Copyright 2000-2020 Broadcom Inc. All rights reserved. * * * Name: mpi2_cnfg.h * Title: MPI Configuration messages and pages * Creation Date: November 10, 2006 * - * mpi2_cnfg.h Version: 02.00.24 + * mpi2_cnfg.h Version: 02.00.47 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used @@ -160,7 +161,97 @@ * 12-20-12 02.00.24 Marked MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION as * obsolete for MPI v2.5 and later. * Added some defines for 12G SAS speeds. + * 04-09-13 02.00.25 Added MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK. + * Fixed MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS to + * match the specification. + * 08-19-13 02.00.26 Added reserved words to MPI2_CONFIG_PAGE_IO_UNIT_7 for + * future use. + * 12-05-13 02.00.27 Added MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL for + * MPI2_CONFIG_PAGE_MAN_7. + * Added EnclosureLevel and ConnectorName fields to + * MPI2_CONFIG_PAGE_SAS_DEV_0. + * Added MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID for + * MPI2_CONFIG_PAGE_SAS_DEV_0. + * Added EnclosureLevel field to + * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. + * Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for + * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. + * 01-08-14 02.00.28 Added more defines for the BiosOptions field of + * MPI2_CONFIG_PAGE_BIOS_1. + * 06-13-14 02.00.29 Added SSUTimeout field to MPI2_CONFIG_PAGE_BIOS_1, and + * more defines for the BiosOptions field. + * 11-18-14 02.00.30 Updated copyright information. + * Added MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG. + * Added AdapterOrderAux fields to BIOS Page 3. + * 03-16-15 02.00.31 Updated for MPI v2.6. + * Added Flags field to IO Unit Page 7. + * Added new SAS Phy Event codes + * 05-25-15 02.00.33 Added more defines for the BiosOptions field of + * MPI2_CONFIG_PAGE_BIOS_1. + * 08-25-15 02.00.34 Bumped Header Version. + * 12-18-15 02.00.35 Added SATADeviceWaitTime to SAS IO Unit Page 4. + * 01-21-16 02.00.36 Added/modified MPI2_MFGPAGE_DEVID_SAS defines. + * Added Link field to PCIe Link Pages + * Added EnclosureLevel and ConnectorName to PCIe + * Device Page 0. + * Added define for PCIE IoUnit page 1 max rate shift. + * Added comment for reserved ExtPageTypes. + * Added SAS 4 22.5 gbs speed support. + * Added PCIe 4 16.0 GT/sec speec support. + * Removed AHCI support. + * Removed SOP support. + * Added NegotiatedLinkRate and NegotiatedPortWidth to + * PCIe device page 0. + * 04-10-16 02.00.37 Fixed MPI2_MFGPAGE_DEVID_SAS3616/3708 defines + * 07-01-16 02.00.38 Added Manufacturing page 7 Connector types. + * Changed declaration of ConnectorName in PCIe DevicePage0 + * to match SAS DevicePage 0. + * Added SATADeviceWaitTime to IO Unit Page 11. + * Added MPI26_MFGPAGE_DEVID_SAS4008 + * Added x16 PCIe width to IO Unit Page 7 + * Added LINKFLAGS to control SRIS in PCIe IO Unit page 1 + * phy data. + * Added InitStatus to PCIe IO Unit Page 1 header. + * 09-01-16 02.00.39 Added MPI26_CONFIG_PAGE_ENCLOSURE_0 and related defines. + * Added MPI26_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE and + * MPI26_ENCLOS_PGAD_FORM_HANDLE page address formats. + * 02-02-17 02.00.40 Added MPI2_MANPAGE7_SLOT_UNKNOWN. + * Added ChassisSlot field to SAS Enclosure Page 0. + * Added ChassisSlot Valid bit (bit 5) to the Flags field + * in SAS Enclosure Page 0. + * 06-13-17 02.00.41 Added MPI26_MFGPAGE_DEVID_SAS3816 and + * MPI26_MFGPAGE_DEVID_SAS3916 defines. + * Removed MPI26_MFGPAGE_DEVID_SAS4008 define. + * Added MPI26_PCIEIOUNIT1_LINKFLAGS_SRNS_EN define. + * Renamed PI26_PCIEIOUNIT1_LINKFLAGS_EN_SRIS to + * PI26_PCIEIOUNIT1_LINKFLAGS_SRIS_EN. + * Renamed MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SRIS to + * MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SEPARATE_REFCLK. + * 09-29-17 02.00.42 Added ControllerResetTO field to PCIe Device Page 2. + * Added NOIOB field to PCIe Device Page 2. + * Added MPI26_PCIEDEV2_CAP_DATA_BLK_ALIGN_AND_GRAN to + * the Capabilities field of PCIe Device Page 2. + * 07-22-18 02.00.43 Added defines for SAS3916 and SAS3816. + * Added WRiteCache defines to IO Unit Page 1. + * Added MaxEnclosureLevel to BIOS Page 1. + * Added OEMRD to SAS Enclosure Page 1. + * Added DMDReportPCIe to PCIe IO Unit Page 1. + * Added Flags field and flags for Retimers to + * PCIe Switch Page 1. + * 08-02-18 02.00.44 Added Slotx2, Slotx4 to ManPage 7. + * 08-15-18 02.00.45 Added ProductSpecific field at end of IOC Page 1 + * 08-28-18 02.00.46 Added NVMs Write Cache flag to IOUnitPage1 + * Added DMDReport Delay Time defines to + * PCIeIOUnitPage1 * -------------------------------------------------------------------------- + * 08-02-18 02.00.44 Added Slotx2, Slotx4 to ManPage 7. + * 08-15-18 02.00.45 Added ProductSpecific field at end of IOC Page 1 + * 08-28-18 02.00.46 Added NVMs Write Cache flag to IOUnitPage1 + * Added DMDReport Delay Time defines to PCIeIOUnitPage1 + * 12-17-18 02.00.47 Swap locations of Slotx2 and Slotx4 in ManPage 7. + * 08-01-19 02.00.49 Add MPI26_MANPAGE7_FLAG_X2_X4_SLOT_INFO_VALID + * Add MPI26_IOUNITPAGE1_NVME_WRCACHE_SHIFT + * 09-13-24 02.00.50 Added PCIe 32 GT/s link rate */ #ifndef MPI2_CNFG_H @@ -243,6 +334,10 @@ typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION { #define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18) #define MPI2_CONFIG_EXTPAGETYPE_ETHERNET (0x19) #define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING (0x1A) +#define MPI2_CONFIG_EXTPAGETYPE_PCIE_IO_UNIT (0x1B) +#define MPI2_CONFIG_EXTPAGETYPE_PCIE_SWITCH (0x1C) +#define MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE (0x1D) +#define MPI2_CONFIG_EXTPAGETYPE_PCIE_LINK (0x1E) /***************************************************************************** @@ -310,6 +405,12 @@ typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION { #define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF) +/*Enclosure PageAddress format */ +#define MPI26_ENCLOS_PGAD_FORM_MASK (0xF0000000) +#define MPI26_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI26_ENCLOS_PGAD_FORM_HANDLE (0x10000000) + +#define MPI26_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF) /*RAID Configuration PageAddress format */ #define MPI2_RAID_PGAD_FORM_MASK (0xF0000000) @@ -336,6 +437,32 @@ typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION { #define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK (0x000000FF) +/*PCIe Switch PageAddress format */ +#define MPI26_PCIE_SWITCH_PGAD_FORM_MASK (0xF0000000) +#define MPI26_PCIE_SWITCH_PGAD_FORM_GET_NEXT_HNDL (0x00000000) +#define MPI26_PCIE_SWITCH_PGAD_FORM_HNDL_PORTNUM (0x10000000) +#define MPI26_PCIE_SWITCH_EXPAND_PGAD_FORM_HNDL (0x20000000) + +#define MPI26_PCIE_SWITCH_PGAD_HANDLE_MASK (0x0000FFFF) +#define MPI26_PCIE_SWITCH_PGAD_PORTNUM_MASK (0x00FF0000) +#define MPI26_PCIE_SWITCH_PGAD_PORTNUM_SHIFT (16) + + +/*PCIe Device PageAddress format */ +#define MPI26_PCIE_DEVICE_PGAD_FORM_MASK (0xF0000000) +#define MPI26_PCIE_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE (0x20000000) + +#define MPI26_PCIE_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF) + +/*PCIe Link PageAddress format */ +#define MPI26_PCIE_LINK_PGAD_FORM_MASK (0xF0000000) +#define MPI26_PCIE_LINK_PGAD_FORM_GET_NEXT_LINK (0x00000000) +#define MPI26_PCIE_LINK_PGAD_FORM_LINK_NUM (0x10000000) + +#define MPI26_PCIE_DEVICE_PGAD_LINKNUM_MASK (0x000000FF) + + /**************************************************************************** * Configuration messages @@ -408,6 +535,7 @@ typedef struct _MPI2_CONFIG_REPLY { ****************************************************************************/ #define MPI2_MFGPAGE_VENDORID_LSI (0x1000) +#define MPI2_MFGPAGE_VENDORID_ATTO (0x117C) /*MPI v2.0 SAS products */ #define MPI2_MFGPAGE_DEVID_SAS2004 (0x0070) @@ -429,6 +557,8 @@ typedef struct _MPI2_CONFIG_REPLY { #define MPI2_MFGPAGE_DEVID_SAS2308_1 (0x0086) #define MPI2_MFGPAGE_DEVID_SAS2308_2 (0x0087) #define MPI2_MFGPAGE_DEVID_SAS2308_3 (0x006E) +#define MPI2_MFGPAGE_DEVID_SWITCH_MPI_EP (0x02B0) +#define MPI2_MFGPAGE_DEVID_SWITCH_MPI_EP_1 (0x02B1) /*MPI v2.5 SAS products */ #define MPI25_MFGPAGE_DEVID_SAS3004 (0x0096) @@ -438,14 +568,46 @@ typedef struct _MPI2_CONFIG_REPLY { #define MPI25_MFGPAGE_DEVID_SAS3108_5 (0x0094) #define MPI25_MFGPAGE_DEVID_SAS3108_6 (0x0095) - +/* MPI v2.6 SAS Products */ +#define MPI26_MFGPAGE_DEVID_SAS3216 (0x00C9) +#define MPI26_MFGPAGE_DEVID_SAS3224 (0x00C4) +#define MPI26_MFGPAGE_DEVID_SAS3316_1 (0x00C5) +#define MPI26_MFGPAGE_DEVID_SAS3316_2 (0x00C6) +#define MPI26_MFGPAGE_DEVID_SAS3316_3 (0x00C7) +#define MPI26_MFGPAGE_DEVID_SAS3316_4 (0x00C8) +#define MPI26_MFGPAGE_DEVID_SAS3324_1 (0x00C0) +#define MPI26_MFGPAGE_DEVID_SAS3324_2 (0x00C1) +#define MPI26_MFGPAGE_DEVID_SAS3324_3 (0x00C2) +#define MPI26_MFGPAGE_DEVID_SAS3324_4 (0x00C3) + +#define MPI26_MFGPAGE_DEVID_SAS3516 (0x00AA) +#define MPI26_MFGPAGE_DEVID_SAS3516_1 (0x00AB) +#define MPI26_MFGPAGE_DEVID_SAS3416 (0x00AC) +#define MPI26_MFGPAGE_DEVID_SAS3508 (0x00AD) +#define MPI26_MFGPAGE_DEVID_SAS3508_1 (0x00AE) +#define MPI26_MFGPAGE_DEVID_SAS3408 (0x00AF) +#define MPI26_MFGPAGE_DEVID_SAS3716 (0x00D0) +#define MPI26_MFGPAGE_DEVID_SAS3616 (0x00D1) +#define MPI26_MFGPAGE_DEVID_SAS3708 (0x00D2) + +#define MPI26_MFGPAGE_DEVID_SEC_MASK_3916 (0x0003) +#define MPI26_MFGPAGE_DEVID_INVALID0_3916 (0x00E0) +#define MPI26_MFGPAGE_DEVID_CFG_SEC_3916 (0x00E1) +#define MPI26_MFGPAGE_DEVID_HARD_SEC_3916 (0x00E2) +#define MPI26_MFGPAGE_DEVID_INVALID1_3916 (0x00E3) + +#define MPI26_MFGPAGE_DEVID_SEC_MASK_3816 (0x0003) +#define MPI26_MFGPAGE_DEVID_INVALID0_3816 (0x00E4) +#define MPI26_MFGPAGE_DEVID_CFG_SEC_3816 (0x00E5) +#define MPI26_MFGPAGE_DEVID_HARD_SEC_3816 (0x00E6) +#define MPI26_MFGPAGE_DEVID_INVALID1_3816 (0x00E7) /*Manufacturing Page 0 */ typedef struct _MPI2_CONFIG_PAGE_MAN_0 { MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ - U8 ChipName[16]; /*0x04 */ + U8 ChipName[16] __nonstring; /*0x04 */ U8 ChipRevision[8]; /*0x14 */ U8 BoardName[16]; /*0x1C */ U8 BoardAssembly[16]; /*0x2C */ @@ -482,18 +644,14 @@ typedef struct _MPI2_CHIP_REVISION_ID { /*Manufacturing Page 2 */ /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check Header.PageLength at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check Header.PageLength at + *runtime before using HwSettings[]. */ -#ifndef MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS -#define MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS (1) -#endif typedef struct _MPI2_CONFIG_PAGE_MAN_2 { MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ MPI2_CHIP_REVISION_ID ChipId; /*0x04 */ - U32 - HwSettings[MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS];/*0x08 */ + U32 HwSettings[]; /*0x08 */ } MPI2_CONFIG_PAGE_MAN_2, *PTR_MPI2_CONFIG_PAGE_MAN_2, Mpi2ManufacturingPage2_t, @@ -505,18 +663,14 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_2 { /*Manufacturing Page 3 */ /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check Header.PageLength at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check Header.PageLength at + *runtime before using Info[]. */ -#ifndef MPI2_MAN_PAGE_3_INFO_WORDS -#define MPI2_MAN_PAGE_3_INFO_WORDS (1) -#endif typedef struct _MPI2_CONFIG_PAGE_MAN_3 { MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ MPI2_CHIP_REVISION_ID ChipId; /*0x04 */ - U32 - Info[MPI2_MAN_PAGE_3_INFO_WORDS];/*0x08 */ + U32 Info[]; /*0x08 */ } MPI2_CONFIG_PAGE_MAN_3, *PTR_MPI2_CONFIG_PAGE_MAN_3, Mpi2ManufacturingPage3_t, @@ -604,12 +758,9 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_4 { /*Manufacturing Page 5 */ /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumPhys at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumPhys at runtime before using Phy[]. */ -#ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES -#define MPI2_MAN_PAGE_5_PHY_ENTRIES (1) -#endif typedef struct _MPI2_MANUFACTURING5_ENTRY { U64 WWID; /*0x00 */ @@ -626,8 +777,7 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_5 { U16 Reserved2; /*0x06 */ U32 Reserved3; /*0x08 */ U32 Reserved4; /*0x0C */ - MPI2_MANUFACTURING5_ENTRY - Phy[MPI2_MAN_PAGE_5_PHY_ENTRIES];/*0x08 */ + MPI2_MANUFACTURING5_ENTRY Phy[]; /*0x10 */ } MPI2_CONFIG_PAGE_MAN_5, *PTR_MPI2_CONFIG_PAGE_MAN_5, Mpi2ManufacturingPage5_t, @@ -657,7 +807,8 @@ typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO { U8 Location; /*0x14 */ U8 ReceptacleID; /*0x15 */ U16 Slot; /*0x16 */ - U32 Reserved2; /*0x18 */ + U16 Slotx2; /*0x18 */ + U16 Slotx4; /*0x1A */ } MPI2_MANPAGE7_CONNECTOR_INFO, *PTR_MPI2_MANPAGE7_CONNECTOR_INFO, Mpi2ManPage7ConnectorInfo_t, @@ -682,6 +833,12 @@ typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO { #define MPI2_MANPAGE7_PINOUT_SFF_8644_8X (0x0B) #define MPI2_MANPAGE7_PINOUT_SFF_8644_16X (0x0C) #define MPI2_MANPAGE7_PINOUT_SFF_8436 (0x0D) +#define MPI2_MANPAGE7_PINOUT_SFF_8088_A (0x0E) +#define MPI2_MANPAGE7_PINOUT_SFF_8643_16i (0x0F) +#define MPI2_MANPAGE7_PINOUT_SFF_8654_4i (0x10) +#define MPI2_MANPAGE7_PINOUT_SFF_8654_8i (0x11) +#define MPI2_MANPAGE7_PINOUT_SFF_8611_4i (0x12) +#define MPI2_MANPAGE7_PINOUT_SFF_8611_8i (0x13) /*defines for the Location field */ #define MPI2_MANPAGE7_LOCATION_UNKNOWN (0x01) @@ -692,13 +849,13 @@ typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO { #define MPI2_MANPAGE7_LOCATION_NOT_PRESENT (0x20) #define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED (0x80) +/*defines for the Slot field */ +#define MPI2_MANPAGE7_SLOT_UNKNOWN (0xFFFF) + /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumPhys at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumPhys at runtime before using ConnectorInfo[]. */ -#ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX -#define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1) -#endif typedef struct _MPI2_CONFIG_PAGE_MAN_7 { MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ @@ -709,8 +866,7 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_7 { U8 NumPhys; /*0x20 */ U8 Reserved3; /*0x21 */ U16 Reserved4; /*0x22 */ - MPI2_MANPAGE7_CONNECTOR_INFO - ConnectorInfo[MPI2_MANPAGE7_CONNECTOR_INFO_MAX]; /*0x24 */ + MPI2_MANPAGE7_CONNECTOR_INFO ConnectorInfo[]; /*0x24 */ } MPI2_CONFIG_PAGE_MAN_7, *PTR_MPI2_CONFIG_PAGE_MAN_7, Mpi2ManufacturingPage7_t, @@ -719,9 +875,12 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_7 { #define MPI2_MANUFACTURING7_PAGEVERSION (0x01) /*defines for the Flags field */ +#define MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL (0x00000008) #define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER (0x00000002) #define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001) +#define MPI26_MANPAGE7_FLAG_CONN_LANE_USE_PINOUT (0x00000020) +#define MPI26_MANPAGE7_FLAG_X2_X4_SLOT_INFO_VALID (0x00000010) /* *Generic structure to use for product-specific manufacturing pages @@ -791,7 +950,13 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 { #define MPI2_IOUNITPAGE1_PAGEVERSION (0x04) -/*IO Unit Page 1 Flags defines */ +/* IO Unit Page 1 Flags defines */ +#define MPI26_IOUNITPAGE1_NVME_WRCACHE_MASK (0x00030000) +#define MPI26_IOUNITPAGE1_NVME_WRCACHE_SHIFT (16) +#define MPI26_IOUNITPAGE1_NVME_WRCACHE_NO_CHANGE (0x00000000) +#define MPI26_IOUNITPAGE1_NVME_WRCACHE_ENABLE (0x00010000) +#define MPI26_IOUNITPAGE1_NVME_WRCACHE_DISABLE (0x00020000) +#define MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK (0x00004000) #define MPI25_IOUNITPAGE1_NEW_DEVICE_FAST_PATH_DISABLE (0x00002000) #define MPI25_IOUNITPAGE1_DISABLE_FAST_PATH (0x00001000) #define MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY (0x00000800) @@ -810,10 +975,10 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 { /* *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for GPIOCount at runtime. + *36 and check the value returned for GPIOCount at runtime. */ #ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX -#define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1) +#define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (36) #endif typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 { @@ -839,12 +1004,9 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 { /*IO Unit Page 5 */ /* - *Upper layer code (drivers, utilities, etc.) should leave this define set to - *one and check the value returned for NumDmaEngines at runtime. + *Upper layer code (drivers, utilities, etc.) should check the value returned + *for NumDmaEngines at runtime before using DmaEngineCapabilities[]. */ -#ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES -#define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1) -#endif typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 { MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ @@ -862,7 +1024,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 { U32 Reserved2; /*0x24 */ U32 Reserved3; /*0x28 */ U32 - DmaEngineCapabilities[MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /*0x2C */ + DmaEngineCapabilities[]; /*0x2C */ } MPI2_CONFIG_PAGE_IO_UNIT_5, *PTR_MPI2_CONFIG_PAGE_IO_UNIT_5, Mpi2IOUnitPage5_t, *pMpi2IOUnitPage5_t; @@ -870,7 +1032,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 { #define MPI2_IOUNITPAGE5_PAGEVERSION (0x00) /*defines for IO Unit Page 5 DmaEngineCapabilities field */ -#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS (0xFF00) +#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS (0xFFFF0000) #define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS (16) #define MPI2_IOUNITPAGE5_DMA_CAP_EEDP (0x0008) @@ -920,11 +1082,18 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 { U8 BoardTemperatureUnits; /*0x16 */ U8 Reserved3; /*0x17 */ + U32 BoardPowerRequirement; /*0x18 */ + U32 PCISlotPowerAllocation; /*0x1C */ +/* reserved prior to MPI v2.6 */ + U8 Flags; /* 0x20 */ + U8 Reserved6; /* 0x21 */ + U16 Reserved7; /* 0x22 */ + U32 Reserved8; /* 0x24 */ } MPI2_CONFIG_PAGE_IO_UNIT_7, *PTR_MPI2_CONFIG_PAGE_IO_UNIT_7, Mpi2IOUnitPage7_t, *pMpi2IOUnitPage7_t; -#define MPI2_IOUNITPAGE7_PAGEVERSION (0x02) +#define MPI2_IOUNITPAGE7_PAGEVERSION (0x05) /*defines for IO Unit Page 7 CurrentPowerMode and PreviousPowerMode fields */ #define MPI25_IOUNITPAGE7_PM_INIT_MASK (0xC0) @@ -946,11 +1115,14 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 { #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2 (0x02) #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4 (0x04) #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8 (0x08) +#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X16 (0x10) /*defines for IO Unit Page 7 PCIeSpeed field */ #define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS (0x00) #define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS (0x01) #define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS (0x02) +#define MPI2_IOUNITPAGE7_PCIE_SPEED_16_0_GBPS (0x03) +#define MPI2_IOUNITPAGE7_PCIE_SPEED_32_0_GBPS (0x04) /*defines for IO Unit Page 7 ProcessorState field */ #define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND (0x0000000F) @@ -1005,6 +1177,8 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 { #define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT (0x01) #define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS (0x02) +/* defines for IO Unit Page 7 Flags field */ +#define MPI2_IOUNITPAGE7_FLAG_CABLE_POWER_EXC (0x01) /*IO Unit Page 8 */ @@ -1028,12 +1202,9 @@ typedef struct _MPI2_IOUNIT8_SENSOR { #define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE (0x0001) /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumSensors at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumSensors at runtime before using Sensor[]. */ -#ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES -#define MPI2_IOUNITPAGE8_SENSOR_ENTRIES (1) -#endif typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 { MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ @@ -1042,8 +1213,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 { U8 NumSensors; /*0x0C */ U8 PollingInterval; /*0x0D */ U16 Reserved3; /*0x0E */ - MPI2_IOUNIT8_SENSOR - Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/*0x10 */ + MPI2_IOUNIT8_SENSOR Sensor[]; /*0x10 */ } MPI2_CONFIG_PAGE_IO_UNIT_8, *PTR_MPI2_CONFIG_PAGE_IO_UNIT_8, Mpi2IOUnitPage8_t, *pMpi2IOUnitPage8_t; @@ -1068,12 +1238,9 @@ typedef struct _MPI2_IOUNIT9_SENSOR { #define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID (0x01) /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumSensors at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumSensors at runtime before using Sensor[]. */ -#ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES -#define MPI2_IOUNITPAGE9_SENSOR_ENTRIES (1) -#endif typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 { MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ @@ -1082,8 +1249,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 { U8 NumSensors; /*0x0C */ U8 Reserved4; /*0x0D */ U16 Reserved3; /*0x0E */ - MPI2_IOUNIT9_SENSOR - Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/*0x10 */ + MPI2_IOUNIT9_SENSOR Sensor[]; /*0x10 */ } MPI2_CONFIG_PAGE_IO_UNIT_9, *PTR_MPI2_CONFIG_PAGE_IO_UNIT_9, Mpi2IOUnitPage9_t, *pMpi2IOUnitPage9_t; @@ -1103,12 +1269,9 @@ typedef struct _MPI2_IOUNIT10_FUNCTION { *pMpi2IOUnit10Function_t; /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumFunctions at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumFunctions at runtime before using Function[]. */ -#ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES -#define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES (1) -#endif typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 { MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ @@ -1117,8 +1280,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 { U16 Reserved2; /*0x06 */ U32 Reserved3; /*0x08 */ U32 Reserved4; /*0x0C */ - MPI2_IOUNIT10_FUNCTION - Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES];/*0x10 */ + MPI2_IOUNIT10_FUNCTION Function[]; /*0x10 */ } MPI2_CONFIG_PAGE_IO_UNIT_10, *PTR_MPI2_CONFIG_PAGE_IO_UNIT_10, Mpi2IOUnitPage10_t, *pMpi2IOUnitPage10_t; @@ -1126,6 +1288,62 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 { #define MPI2_IOUNITPAGE10_PAGEVERSION (0x01) +/* IO Unit Page 11 (for MPI v2.6 and later) */ + +typedef struct _MPI26_IOUNIT11_SPINUP_GROUP { + U8 MaxTargetSpinup; /* 0x00 */ + U8 SpinupDelay; /* 0x01 */ + U8 SpinupFlags; /* 0x02 */ + U8 Reserved1; /* 0x03 */ +} MPI26_IOUNIT11_SPINUP_GROUP, + *PTR_MPI26_IOUNIT11_SPINUP_GROUP, + Mpi26IOUnit11SpinupGroup_t, + *pMpi26IOUnit11SpinupGroup_t; + +/* defines for IO Unit Page 11 SpinupFlags */ +#define MPI26_IOUNITPAGE11_SPINUP_DISABLE_FLAG (0x01) + + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * four and check the value returned for NumPhys at runtime. + */ +#ifndef MPI26_IOUNITPAGE11_PHY_MAX +#define MPI26_IOUNITPAGE11_PHY_MAX (4) +#endif + +typedef struct _MPI26_CONFIG_PAGE_IO_UNIT_11 { + MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x04 */ + MPI26_IOUNIT11_SPINUP_GROUP SpinupGroupParameters[4]; /*0x08 */ + U32 Reserved2; /*0x18 */ + U32 Reserved3; /*0x1C */ + U32 Reserved4; /*0x20 */ + U8 BootDeviceWaitTime; /*0x24 */ + U8 Reserved5; /*0x25 */ + U16 Reserved6; /*0x26 */ + U8 NumPhys; /*0x28 */ + U8 PEInitialSpinupDelay; /*0x29 */ + U8 PEReplyDelay; /*0x2A */ + U8 Flags; /*0x2B */ + U8 PHY[MPI26_IOUNITPAGE11_PHY_MAX];/*0x2C */ +} MPI26_CONFIG_PAGE_IO_UNIT_11, + *PTR_MPI26_CONFIG_PAGE_IO_UNIT_11, + Mpi26IOUnitPage11_t, + *pMpi26IOUnitPage11_t; + +#define MPI26_IOUNITPAGE11_PAGEVERSION (0x00) + +/* defines for Flags field */ +#define MPI26_IOUNITPAGE11_FLAGS_AUTO_PORTENABLE (0x01) + +/* defines for PHY field */ +#define MPI26_IOUNITPAGE11_PHY_SPINUP_GROUP_MASK (0x03) + + + + + /**************************************************************************** * IOC Config Pages @@ -1163,7 +1381,7 @@ typedef struct _MPI2_CONFIG_PAGE_IOC_1 { U8 PCIBusNum; /*0x0E */ U8 PCIDomainSegment; /*0x0F */ U32 Reserved1; /*0x10 */ - U32 Reserved2; /*0x14 */ + U32 ProductSpecific; /* 0x14 */ } MPI2_CONFIG_PAGE_IOC_1, *PTR_MPI2_CONFIG_PAGE_IOC_1, Mpi2IOCPage1_t, *pMpi2IOCPage1_t; @@ -1301,7 +1519,9 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 { MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ U32 BiosOptions; /*0x04 */ U32 IOCSettings; /*0x08 */ - U32 Reserved1; /*0x0C */ + U8 SSUTimeout; /*0x0C */ + U8 MaxEnclosureLevel; /*0x0D */ + U16 Reserved2; /*0x0E */ U32 DeviceSettings; /*0x10 */ U16 NumberOfDevices; /*0x14 */ U16 UEFIVersion; /*0x16 */ @@ -1313,9 +1533,27 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 { *PTR_MPI2_CONFIG_PAGE_BIOS_1, Mpi2BiosPage1_t, *pMpi2BiosPage1_t; -#define MPI2_BIOSPAGE1_PAGEVERSION (0x05) +#define MPI2_BIOSPAGE1_PAGEVERSION (0x07) /*values for BIOS Page 1 BiosOptions field */ +#define MPI2_BIOSPAGE1_OPTIONS_BOOT_LIST_ADD_ALT_BOOT_DEVICE (0x00008000) +#define MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG (0x00004000) + +#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800) +#define MPI2_BIOSPAGE1_OPTIONS_PNS_PBDHL (0x00000000) +#define MPI2_BIOSPAGE1_OPTIONS_PNS_ENCSLOSURE (0x00000800) +#define MPI2_BIOSPAGE1_OPTIONS_PNS_LWWID (0x00001000) +#define MPI2_BIOSPAGE1_OPTIONS_PNS_PSENS (0x00001800) +#define MPI2_BIOSPAGE1_OPTIONS_PNS_ESPHY (0x00002000) + +#define MPI2_BIOSPAGE1_OPTIONS_X86_DISABLE_BIOS (0x00000400) + +#define MPI2_BIOSPAGE1_OPTIONS_MASK_REGISTRATION_UEFI_BSD (0x00000300) +#define MPI2_BIOSPAGE1_OPTIONS_USE_BIT0_REGISTRATION_UEFI_BSD (0x00000000) +#define MPI2_BIOSPAGE1_OPTIONS_FULL_REGISTRATION_UEFI_BSD (0x00000100) +#define MPI2_BIOSPAGE1_OPTIONS_ADAPTER_REGISTRATION_UEFI_BSD (0x00000200) +#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_REGISTRATION_UEFI_BSD (0x00000300) + #define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID (0x000000F0) #define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID (0x00000000) @@ -1450,6 +1688,8 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_2 { /*BIOS Page 3 */ +#define MPI2_BIOSPAGE3_NUM_ADAPTER (4) + typedef struct _MPI2_ADAPTER_INFO { U8 PciBusNumber; /*0x00 */ U8 PciDeviceAndFunctionNumber; /*0x01 */ @@ -1460,17 +1700,26 @@ typedef struct _MPI2_ADAPTER_INFO { #define MPI2_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001) #define MPI2_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002) +typedef struct _MPI2_ADAPTER_ORDER_AUX { + U64 WWID; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U32 Reserved2; /* 0x0C */ +} MPI2_ADAPTER_ORDER_AUX, *PTR_MPI2_ADAPTER_ORDER_AUX, + Mpi2AdapterOrderAux_t, *pMpi2AdapterOrderAux_t; + + typedef struct _MPI2_CONFIG_PAGE_BIOS_3 { MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ U32 GlobalFlags; /*0x04 */ U32 BiosVersion; /*0x08 */ - MPI2_ADAPTER_INFO AdapterOrder[4]; /*0x0C */ + MPI2_ADAPTER_INFO AdapterOrder[MPI2_BIOSPAGE3_NUM_ADAPTER]; U32 Reserved1; /*0x1C */ + MPI2_ADAPTER_ORDER_AUX AdapterOrderAux[MPI2_BIOSPAGE3_NUM_ADAPTER]; } MPI2_CONFIG_PAGE_BIOS_3, *PTR_MPI2_CONFIG_PAGE_BIOS_3, Mpi2BiosPage3_t, *pMpi2BiosPage3_t; -#define MPI2_BIOSPAGE3_PAGEVERSION (0x00) +#define MPI2_BIOSPAGE3_PAGEVERSION (0x01) /*values for BIOS Page 3 GlobalFlags */ #define MPI2_BIOSPAGE3_FLAGS_PAUSE_ON_ERROR (0x00000002) @@ -1486,12 +1735,9 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_3 { /*BIOS Page 4 */ /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumPhys at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumPhys at runtime before using Phy[]. */ -#ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES -#define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1) -#endif typedef struct _MPI2_BIOS4_ENTRY { U64 ReassignmentWWID; /*0x00 */ @@ -1504,8 +1750,7 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_4 { U8 NumPhys; /*0x04 */ U8 Reserved1; /*0x05 */ U16 Reserved2; /*0x06 */ - MPI2_BIOS4_ENTRY - Phy[MPI2_BIOS_PAGE_4_PHY_ENTRIES]; /*0x08 */ + MPI2_BIOS4_ENTRY Phy[]; /*0x08 */ } MPI2_CONFIG_PAGE_BIOS_4, *PTR_MPI2_CONFIG_PAGE_BIOS_4, Mpi2BiosPage4_t, *pMpi2BiosPage4_t; @@ -1558,12 +1803,9 @@ typedef struct _MPI2_RAIDVOL0_SETTINGS { #define MPI2_RAIDVOL0_SETTING_ENABLE_WRITE_CACHING (0x0002) /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumPhysDisks at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumPhysDisks at runtime before using PhysDisk[]. */ -#ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX -#define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX (1) -#endif typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0 { MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ @@ -1583,8 +1825,7 @@ typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0 { U8 Reserved2; /*0x25 */ U8 Reserved3; /*0x26 */ U8 InactiveStatus; /*0x27 */ - MPI2_RAIDVOL0_PHYS_DISK - PhysDisk[MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX]; /*0x28 */ + MPI2_RAIDVOL0_PHYS_DISK PhysDisk[]; /*0x28 */ } MPI2_CONFIG_PAGE_RAID_VOL_0, *PTR_MPI2_CONFIG_PAGE_RAID_VOL_0, Mpi2RaidVolPage0_t, *pMpi2RaidVolPage0_t; @@ -1767,12 +2008,9 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0 { /*RAID Physical Disk Page 1 */ /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumPhysDiskPaths at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumPhysDiskPaths at runtime before using PhysicalDiskPath[]. */ -#ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX -#define MPI2_RAID_PHYS_DISK1_PATH_MAX (1) -#endif typedef struct _MPI2_RAIDPHYSDISK1_PATH { U16 DevHandle; /*0x00 */ @@ -1797,8 +2035,7 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 { U8 PhysDiskNum; /*0x05 */ U16 Reserved1; /*0x06 */ U32 Reserved2; /*0x08 */ - MPI2_RAIDPHYSDISK1_PATH - PhysicalDiskPath[MPI2_RAID_PHYS_DISK1_PATH_MAX];/*0x0C */ + MPI2_RAIDPHYSDISK1_PATH PhysicalDiskPath[]; /*0x0C */ } MPI2_CONFIG_PAGE_RD_PDISK_1, *PTR_MPI2_CONFIG_PAGE_RD_PDISK_1, Mpi2RaidPhysDiskPage1_t, @@ -1827,6 +2064,7 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 { #define MPI2_SAS_NEG_LINK_RATE_3_0 (0x09) #define MPI2_SAS_NEG_LINK_RATE_6_0 (0x0A) #define MPI25_SAS_NEG_LINK_RATE_12_0 (0x0B) +#define MPI26_SAS_NEG_LINK_RATE_22_5 (0x0C) /*values for AttachedPhyInfo fields */ @@ -1894,12 +2132,14 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 { #define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90) #define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0) #define MPI25_SAS_PRATE_MAX_RATE_12_0 (0xB0) +#define MPI26_SAS_PRATE_MAX_RATE_22_5 (0xC0) #define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F) #define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00) #define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08) #define MPI2_SAS_PRATE_MIN_RATE_3_0 (0x09) #define MPI2_SAS_PRATE_MIN_RATE_6_0 (0x0A) #define MPI25_SAS_PRATE_MIN_RATE_12_0 (0x0B) +#define MPI26_SAS_PRATE_MIN_RATE_22_5 (0x0C) /*values for SAS HwLinkRate fields */ @@ -1908,11 +2148,13 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 { #define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90) #define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0) #define MPI25_SAS_HWRATE_MAX_RATE_12_0 (0xB0) +#define MPI26_SAS_HWRATE_MAX_RATE_22_5 (0xC0) #define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F) #define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08) #define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09) #define MPI2_SAS_HWRATE_MIN_RATE_6_0 (0x0A) #define MPI25_SAS_HWRATE_MIN_RATE_12_0 (0x0B) +#define MPI26_SAS_HWRATE_MIN_RATE_22_5 (0x0C) @@ -1938,12 +2180,9 @@ typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA { *pMpi2SasIOUnit0PhyData_t; /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumPhys at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumPhys at runtime before using PhyData[]. */ -#ifndef MPI2_SAS_IOUNIT0_PHY_MAX -#define MPI2_SAS_IOUNIT0_PHY_MAX (1) -#endif typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0 { MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ @@ -1951,8 +2190,7 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0 { U8 NumPhys; /*0x0C */ U8 Reserved2;/*0x0D */ U16 Reserved3;/*0x0E */ - MPI2_SAS_IO_UNIT0_PHY_DATA - PhyData[MPI2_SAS_IOUNIT0_PHY_MAX]; /*0x10 */ + MPI2_SAS_IO_UNIT0_PHY_DATA PhyData[];/*0x10 */ } MPI2_CONFIG_PAGE_SASIOUNIT_0, *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_0, Mpi2SasIOUnitPage0_t, *pMpi2SasIOUnitPage0_t; @@ -1964,6 +2202,8 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0 { #define MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG (0x01) /*values for SAS IO Unit Page 0 PhyFlags */ +#define MPI2_SASIOUNIT0_PHYFLAGS_INIT_PERSIST_CONNECT (0x40) +#define MPI2_SASIOUNIT0_PHYFLAGS_TARG_PERSIST_CONNECT (0x20) #define MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED (0x10) #define MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08) @@ -2011,12 +2251,9 @@ typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA { *pMpi2SasIOUnit1PhyData_t; /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumPhys at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumPhys at runtime before using PhyData[]. */ -#ifndef MPI2_SAS_IOUNIT1_PHY_MAX -#define MPI2_SAS_IOUNIT1_PHY_MAX (1) -#endif typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 { MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ @@ -2037,7 +2274,7 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 { U8 IODeviceMissingDelay; /*0x13 */ MPI2_SAS_IO_UNIT1_PHY_DATA - PhyData[MPI2_SAS_IOUNIT1_PHY_MAX]; /*0x14 */ + PhyData[]; /*0x14 */ } MPI2_CONFIG_PAGE_SASIOUNIT_1, *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_1, Mpi2SasIOUnitPage1_t, *pMpi2SasIOUnitPage1_t; @@ -2066,6 +2303,8 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 { #define MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001) /*values for SAS IO Unit Page 1 AdditionalControlFlags */ +#define MPI2_SASIOUNIT1_ACONTROL_PROD_SPECIFIC_1 (0x8000) +#define MPI2_SASIOUNIT1_ACONTROL_DA_PERSIST_CONNECT (0x0100) #define MPI2_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080) #define MPI2_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040) #define MPI2_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION (0x0020) @@ -2083,6 +2322,8 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 { #define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) /*values for SAS IO Unit Page 1 PhyFlags */ +#define MPI2_SASIOUNIT1_PHYFLAGS_INIT_PERSIST_CONNECT (0x40) +#define MPI2_SASIOUNIT1_PHYFLAGS_TARG_PERSIST_CONNECT (0x20) #define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE (0x10) #define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08) @@ -2092,17 +2333,19 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 { #define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90) #define MPI2_SASIOUNIT1_MAX_RATE_6_0 (0xA0) #define MPI25_SASIOUNIT1_MAX_RATE_12_0 (0xB0) +#define MPI26_SASIOUNIT1_MAX_RATE_22_5 (0xC0) #define MPI2_SASIOUNIT1_MIN_RATE_MASK (0x0F) #define MPI2_SASIOUNIT1_MIN_RATE_1_5 (0x08) #define MPI2_SASIOUNIT1_MIN_RATE_3_0 (0x09) #define MPI2_SASIOUNIT1_MIN_RATE_6_0 (0x0A) #define MPI25_SASIOUNIT1_MIN_RATE_12_0 (0x0B) +#define MPI26_SASIOUNIT1_MIN_RATE_22_5 (0x0C) /*see mpi2_sas.h for values for *SAS IO Unit Page 1 ControllerPhyDeviceInfo values */ -/*SAS IO Unit Page 4 */ +/*SAS IO Unit Page 4 (for MPI v2.5 and earlier) */ typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP { U8 MaxTargetSpinup; /*0x00 */ @@ -2138,7 +2381,7 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4 { U8 BootDeviceWaitTime; /*0x24 */ U8 - Reserved4; /*0x25 */ + SATADeviceWaitTime; /*0x25 */ U16 Reserved5; /*0x26 */ U8 @@ -2212,12 +2455,9 @@ typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS { #define MPI2_SASIOUNIT5_ITE_ONE_MICROSECOND (0) /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumPhys at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumPhys at runtime before using SASPhyPowerManagementSettings[]. */ -#ifndef MPI2_SAS_IOUNIT5_PHY_MAX -#define MPI2_SAS_IOUNIT5_PHY_MAX (1) -#endif typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 { MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ @@ -2226,7 +2466,7 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 { U16 Reserved2;/*0x0A */ U32 Reserved3;/*0x0C */ MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS - SASPhyPowerManagementSettings[MPI2_SAS_IOUNIT5_PHY_MAX];/*0x10 */ + SASPhyPowerManagementSettings[]; /*0x10 */ } MPI2_CONFIG_PAGE_SASIOUNIT_5, *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5, Mpi2SasIOUnitPage5_t, *pMpi2SasIOUnitPage5_t; @@ -2264,12 +2504,9 @@ typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS { #define MPI2_SASIOUNIT6_MODULATION_100_PERCENT (0x03) /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumGroups at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumGroups at runtime before using PortWidthModulationGroupStatus[]. */ -#ifndef MPI2_SAS_IOUNIT6_GROUP_MAX -#define MPI2_SAS_IOUNIT6_GROUP_MAX (1) -#endif typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 { MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ @@ -2279,7 +2516,7 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 { U8 Reserved3; /*0x11 */ U16 Reserved4; /*0x12 */ MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS - PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /*0x14 */ + PortWidthModulationGroupStatus[]; /*0x14 */ } MPI2_CONFIG_PAGE_SASIOUNIT_6, *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6, Mpi2SasIOUnitPage6_t, *pMpi2SasIOUnitPage6_t; @@ -2307,12 +2544,9 @@ typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS { /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumGroups at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumGroups at runtime before using PortWidthModulationGroupSettings[]. */ -#ifndef MPI2_SAS_IOUNIT7_GROUP_MAX -#define MPI2_SAS_IOUNIT7_GROUP_MAX (1) -#endif typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 { MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ @@ -2325,7 +2559,7 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 { U8 Reserved4; /*0x15 */ U16 Reserved5; /*0x16 */ MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS - PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX];/*0x18 */ + PortWidthModulationGroupSettings[]; /*0x18 */ } MPI2_CONFIG_PAGE_SASIOUNIT_7, *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7, Mpi2SasIOUnitPage7_t, *pMpi2SasIOUnitPage7_t; @@ -2623,9 +2857,9 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 { U8 ControlGroup; /*0x2E */ U8 - Reserved1; /*0x2F */ + EnclosureLevel; /*0x2F */ U32 - Reserved2; /*0x30 */ + ConnectorName[4]; /*0x30 */ U32 Reserved3; /*0x34 */ } MPI2_CONFIG_PAGE_SAS_DEV_0, @@ -2633,7 +2867,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 { Mpi2SasDevicePage0_t, *pMpi2SasDevicePage0_t; -#define MPI2_SASDEVICE0_PAGEVERSION (0x08) +#define MPI2_SASDEVICE0_PAGEVERSION (0x09) /*values for SAS Device Page 0 AccessStatus field */ #define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00) @@ -2673,6 +2907,8 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 { #define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020) #define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010) #define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008) +#define MPI2_SAS_DEVICE0_FLAGS_PERSIST_CAPABLE (0x0004) +#define MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID (0x0002) #define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001) @@ -2794,12 +3030,9 @@ typedef struct _MPI2_SASPHY2_PHY_EVENT { /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumPhyEvents at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumPhyEvents at runtime before using PhyEvent[]. */ -#ifndef MPI2_SASPHY2_PHY_EVENT_MAX -#define MPI2_SASPHY2_PHY_EVENT_MAX (1) -#endif typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 { MPI2_CONFIG_EXTENDED_PAGE_HEADER @@ -2813,7 +3046,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 { U16 Reserved3; /*0x0E */ MPI2_SASPHY2_PHY_EVENT - PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX]; /*0x10 */ + PhyEvent[]; /*0x10 */ } MPI2_CONFIG_PAGE_SAS_PHY_2, *PTR_MPI2_CONFIG_PAGE_SAS_PHY_2, Mpi2SasPhyPage2_t, @@ -2879,6 +3112,19 @@ typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG { #define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xD1) #define MPI2_SASPHY3_EVENT_CODE_RX_AIP (0xD2) +/*Following codes are product specific and in MPI v2.6 and later */ +#define MPI2_SASPHY3_EVENT_CODE_LCARB_WAIT_TIME (0xD3) +#define MPI2_SASPHY3_EVENT_CODE_RCVD_CONN_RESP_WAIT_TIME (0xD4) +#define MPI2_SASPHY3_EVENT_CODE_LCCONN_TIME (0xD5) +#define MPI2_SASPHY3_EVENT_CODE_SSP_TX_START_TRANSMIT (0xD6) +#define MPI2_SASPHY3_EVENT_CODE_SATA_TX_START (0xD7) +#define MPI2_SASPHY3_EVENT_CODE_SMP_TX_START_TRANSMT (0xD8) +#define MPI2_SASPHY3_EVENT_CODE_TX_SMP_BREAK_CONN (0xD9) +#define MPI2_SASPHY3_EVENT_CODE_SSP_RX_START_RECEIVE (0xDA) +#define MPI2_SASPHY3_EVENT_CODE_SATA_RX_START_RECEIVE (0xDB) +#define MPI2_SASPHY3_EVENT_CODE_SMP_RX_START_RECEIVE (0xDC) + + /*values for the CounterType field */ #define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING (0x00) #define MPI2_SASPHY3_COUNTER_TYPE_SATURATING (0x01) @@ -2895,12 +3141,9 @@ typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG { #define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001) /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumPhyEvents at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumPhyEvents at runtime before using PhyEventConfig[]. */ -#ifndef MPI2_SASPHY3_PHY_EVENT_MAX -#define MPI2_SASPHY3_PHY_EVENT_MAX (1) -#endif typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 { MPI2_CONFIG_EXTENDED_PAGE_HEADER @@ -2914,7 +3157,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 { U16 Reserved3; /*0x0E */ MPI2_SASPHY3_PHY_EVENT_CONFIG - PhyEventConfig[MPI2_SASPHY3_PHY_EVENT_MAX]; /*0x10 */ + PhyEventConfig[]; /*0x10 */ } MPI2_CONFIG_PAGE_SAS_PHY_3, *PTR_MPI2_CONFIG_PAGE_SAS_PHY_3, Mpi2SasPhyPage3_t, *pMpi2SasPhyPage3_t; @@ -2995,35 +3238,34 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_PORT_0 { /*SAS Enclosure Page 0 */ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 { - MPI2_CONFIG_EXTENDED_PAGE_HEADER - Header; /*0x00 */ - U32 - Reserved1; /*0x08 */ - U64 - EnclosureLogicalID; /*0x0C */ - U16 - Flags; /*0x14 */ - U16 - EnclosureHandle; /*0x16 */ - U16 - NumSlots; /*0x18 */ - U16 - StartSlot; /*0x1A */ - U16 - Reserved2; /*0x1C */ - U16 - SEPDevHandle; /*0x1E */ - U32 - Reserved3; /*0x20 */ - U32 - Reserved4; /*0x24 */ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x08 */ + U64 EnclosureLogicalID; /*0x0C */ + U16 Flags; /*0x14 */ + U16 EnclosureHandle; /*0x16 */ + U16 NumSlots; /*0x18 */ + U16 StartSlot; /*0x1A */ + U8 ChassisSlot; /*0x1C */ + U8 EnclosureLevel; /*0x1D */ + U16 SEPDevHandle; /*0x1E */ + U8 OEMRD; /*0x20 */ + U8 Reserved1a; /*0x21 */ + U16 Reserved2; /*0x22 */ + U32 Reserved3; /*0x24 */ } MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, *PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, - Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t; + Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t, + MPI26_CONFIG_PAGE_ENCLOSURE_0, + *PTR_MPI26_CONFIG_PAGE_ENCLOSURE_0, + Mpi26EnclosurePage0_t, *pMpi26EnclosurePage0_t; -#define MPI2_SASENCLOSURE0_PAGEVERSION (0x03) +#define MPI2_SASENCLOSURE0_PAGEVERSION (0x04) /*values for SAS Enclosure Page 0 Flags field */ +#define MPI26_SAS_ENCLS0_FLAGS_OEMRD_VALID (0x0080) +#define MPI26_SAS_ENCLS0_FLAGS_OEMRD_COLLECTING (0x0040) +#define MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020) +#define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010) #define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F) #define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000) #define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES (0x0001) @@ -3032,6 +3274,20 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 { #define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004) #define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005) +#define MPI26_ENCLOSURE0_PAGEVERSION (0x04) + +/*Values for Enclosure Page 0 Flags field */ +#define MPI26_ENCLS0_FLAGS_OEMRD_VALID (0x0080) +#define MPI26_ENCLS0_FLAGS_OEMRD_COLLECTING (0x0040) +#define MPI26_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020) +#define MPI26_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010) +#define MPI26_ENCLS0_FLAGS_MNG_MASK (0x000F) +#define MPI26_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000) +#define MPI26_ENCLS0_FLAGS_MNG_IOC_SES (0x0001) +#define MPI26_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002) +#define MPI26_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003) +#define MPI26_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004) +#define MPI26_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005) /**************************************************************************** * Log Config Page @@ -3040,12 +3296,9 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 { /*Log Page 0 */ /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumLogEntries at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumLogEntries at runtime before using LogEntry[]. */ -#ifndef MPI2_LOG_0_NUM_LOG_ENTRIES -#define MPI2_LOG_0_NUM_LOG_ENTRIES (1) -#endif #define MPI2_LOG_0_LOG_DATA_LENGTH (0x1C) @@ -3075,8 +3328,7 @@ typedef struct _MPI2_CONFIG_PAGE_LOG_0 { U32 Reserved2; /*0x0C */ U16 NumLogEntries;/*0x10 */ U16 Reserved3; /*0x12 */ - MPI2_LOG_0_ENTRY - LogEntry[MPI2_LOG_0_NUM_LOG_ENTRIES]; /*0x14 */ + MPI2_LOG_0_ENTRY LogEntry[]; /*0x14 */ } MPI2_CONFIG_PAGE_LOG_0, *PTR_MPI2_CONFIG_PAGE_LOG_0, Mpi2LogPage0_t, *pMpi2LogPage0_t; @@ -3090,12 +3342,9 @@ typedef struct _MPI2_CONFIG_PAGE_LOG_0 { /*RAID Page 0 */ /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumElements at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumElements at runtime before using ConfigElement[]. */ -#ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS -#define MPI2_RAIDCONFIG0_MAX_ELEMENTS (1) -#endif typedef struct _MPI2_RAIDCONFIG0_CONFIG_ELEMENT { U16 ElementFlags; /*0x00 */ @@ -3128,8 +3377,7 @@ typedef struct _MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0 { U8 NumElements; /*0x2C */ U8 Reserved2; /*0x2D */ U16 Reserved3; /*0x2E */ - MPI2_RAIDCONFIG0_CONFIG_ELEMENT - ConfigElement[MPI2_RAIDCONFIG0_MAX_ELEMENTS]; /*0x30 */ + MPI2_RAIDCONFIG0_CONFIG_ELEMENT ConfigElement[];/*0x30 */ } MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0, *PTR_MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0, Mpi2RaidConfigurationPage0_t, @@ -3331,4 +3579,435 @@ typedef struct _MPI2_CONFIG_PAGE_EXT_MAN_PS { /*PageVersion should be provided by product-specific code */ + + +/**************************************************************************** +* values for fields used by several types of PCIe Config Pages +****************************************************************************/ + +/*values for NegotiatedLinkRates fields */ +#define MPI26_PCIE_NEG_LINK_RATE_MASK_PHYSICAL (0x0F) +/*link rates used for Negotiated Physical Link Rate */ +#define MPI26_PCIE_NEG_LINK_RATE_UNKNOWN (0x00) +#define MPI26_PCIE_NEG_LINK_RATE_PHY_DISABLED (0x01) +#define MPI26_PCIE_NEG_LINK_RATE_2_5 (0x02) +#define MPI26_PCIE_NEG_LINK_RATE_5_0 (0x03) +#define MPI26_PCIE_NEG_LINK_RATE_8_0 (0x04) +#define MPI26_PCIE_NEG_LINK_RATE_16_0 (0x05) +#define MPI26_PCIE_NEG_LINK_RATE_32_0 (0x06) + + +/**************************************************************************** +* PCIe IO Unit Config Pages (MPI v2.6 and later) +****************************************************************************/ + +/*PCIe IO Unit Page 0 */ + +typedef struct _MPI26_PCIE_IO_UNIT0_PHY_DATA { + U8 Link; /*0x00 */ + U8 LinkFlags; /*0x01 */ + U8 PhyFlags; /*0x02 */ + U8 NegotiatedLinkRate; /*0x03 */ + U32 ControllerPhyDeviceInfo;/*0x04 */ + U16 AttachedDevHandle; /*0x08 */ + U16 ControllerDevHandle; /*0x0A */ + U32 EnumerationStatus; /*0x0C */ + U32 Reserved1; /*0x10 */ +} MPI26_PCIE_IO_UNIT0_PHY_DATA, + *PTR_MPI26_PCIE_IO_UNIT0_PHY_DATA, + Mpi26PCIeIOUnit0PhyData_t, *pMpi26PCIeIOUnit0PhyData_t; + +/* + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumPhys at runtime before using PhyData[]. + */ + +typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x08 */ + U8 NumPhys; /*0x0C */ + U8 InitStatus; /*0x0D */ + U16 Reserved3; /*0x0E */ + MPI26_PCIE_IO_UNIT0_PHY_DATA + PhyData[]; /*0x10 */ +} MPI26_CONFIG_PAGE_PIOUNIT_0, + *PTR_MPI26_CONFIG_PAGE_PIOUNIT_0, + Mpi26PCIeIOUnitPage0_t, *pMpi26PCIeIOUnitPage0_t; + +#define MPI26_PCIEIOUNITPAGE0_PAGEVERSION (0x00) + +/*values for PCIe IO Unit Page 0 LinkFlags */ +#define MPI26_PCIEIOUNIT0_LINKFLAGS_ENUMERATION_IN_PROGRESS (0x08) + +/*values for PCIe IO Unit Page 0 PhyFlags */ +#define MPI26_PCIEIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08) + +/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ + +/*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo + *values + */ + +/*values for PCIe IO Unit Page 0 EnumerationStatus */ +#define MPI26_PCIEIOUNIT0_ES_MAX_SWITCHES_EXCEEDED (0x40000000) +#define MPI26_PCIEIOUNIT0_ES_MAX_DEVICES_EXCEEDED (0x20000000) + + +/*PCIe IO Unit Page 1 */ + +typedef struct _MPI26_PCIE_IO_UNIT1_PHY_DATA { + U8 Link; /*0x00 */ + U8 LinkFlags; /*0x01 */ + U8 PhyFlags; /*0x02 */ + U8 MaxMinLinkRate; /*0x03 */ + U32 ControllerPhyDeviceInfo; /*0x04 */ + U32 Reserved1; /*0x08 */ +} MPI26_PCIE_IO_UNIT1_PHY_DATA, + *PTR_MPI26_PCIE_IO_UNIT1_PHY_DATA, + Mpi26PCIeIOUnit1PhyData_t, *pMpi26PCIeIOUnit1PhyData_t; + +/*values for LinkFlags */ +#define MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SEPARATE_REFCLK (0x00) +#define MPI26_PCIEIOUNIT1_LINKFLAGS_SRIS_EN (0x01) +#define MPI26_PCIEIOUNIT1_LINKFLAGS_SRNS_EN (0x02) + +/* + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumPhys at runtime before using PhyData[]. + */ + +typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_1 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U16 ControlFlags; /*0x08 */ + U16 Reserved; /*0x0A */ + U16 AdditionalControlFlags; /*0x0C */ + U16 NVMeMaxQueueDepth; /*0x0E */ + U8 NumPhys; /*0x10 */ + U8 DMDReportPCIe; /*0x11 */ + U16 Reserved2; /*0x12 */ + MPI26_PCIE_IO_UNIT1_PHY_DATA + PhyData[]; /*0x14 */ +} MPI26_CONFIG_PAGE_PIOUNIT_1, + *PTR_MPI26_CONFIG_PAGE_PIOUNIT_1, + Mpi26PCIeIOUnitPage1_t, *pMpi26PCIeIOUnitPage1_t; + +#define MPI26_PCIEIOUNITPAGE1_PAGEVERSION (0x00) + +/*values for PCIe IO Unit Page 1 PhyFlags */ +#define MPI26_PCIEIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08) +#define MPI26_PCIEIOUNIT1_PHYFLAGS_ENDPOINT_ONLY (0x01) + +/*values for PCIe IO Unit Page 1 MaxMinLinkRate */ +#define MPI26_PCIEIOUNIT1_MAX_RATE_MASK (0xF0) +#define MPI26_PCIEIOUNIT1_MAX_RATE_SHIFT (4) +#define MPI26_PCIEIOUNIT1_MAX_RATE_2_5 (0x20) +#define MPI26_PCIEIOUNIT1_MAX_RATE_5_0 (0x30) +#define MPI26_PCIEIOUNIT1_MAX_RATE_8_0 (0x40) +#define MPI26_PCIEIOUNIT1_MAX_RATE_16_0 (0x50) +#define MPI26_PCIEIOUNIT1_MAX_RATE_32_0 (0x60) + +/*values for PCIe IO Unit Page 1 DMDReportPCIe */ +#define MPI26_PCIEIOUNIT1_DMDRPT_UNIT_MASK (0x80) +#define MPI26_PCIEIOUNIT1_DMDRPT_UNIT_1_SEC (0x00) +#define MPI26_PCIEIOUNIT1_DMDRPT_UNIT_16_SEC (0x80) +#define MPI26_PCIEIOUNIT1_DMDRPT_DELAY_TIME_MASK (0x7F) + +/*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo + *values + */ + + +/**************************************************************************** +* PCIe Switch Config Pages (MPI v2.6 and later) +****************************************************************************/ + +/*PCIe Switch Page 0 */ + +typedef struct _MPI26_CONFIG_PAGE_PSWITCH_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U8 PhysicalPort; /*0x08 */ + U8 Reserved1; /*0x09 */ + U16 Reserved2; /*0x0A */ + U16 DevHandle; /*0x0C */ + U16 ParentDevHandle; /*0x0E */ + U8 NumPorts; /*0x10 */ + U8 PCIeLevel; /*0x11 */ + U16 Reserved3; /*0x12 */ + U32 Reserved4; /*0x14 */ + U32 Reserved5; /*0x18 */ + U32 Reserved6; /*0x1C */ +} MPI26_CONFIG_PAGE_PSWITCH_0, *PTR_MPI26_CONFIG_PAGE_PSWITCH_0, + Mpi26PCIeSwitchPage0_t, *pMpi26PCIeSwitchPage0_t; + +#define MPI26_PCIESWITCH0_PAGEVERSION (0x00) + + +/*PCIe Switch Page 1 */ + +typedef struct _MPI26_CONFIG_PAGE_PSWITCH_1 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U8 PhysicalPort; /*0x08 */ + U8 Reserved1; /*0x09 */ + U16 Reserved2; /*0x0A */ + U8 NumPorts; /*0x0C */ + U8 PortNum; /*0x0D */ + U16 AttachedDevHandle; /*0x0E */ + U16 SwitchDevHandle; /*0x10 */ + U8 NegotiatedPortWidth; /*0x12 */ + U8 NegotiatedLinkRate; /*0x13 */ + U32 Reserved4; /*0x14 */ + U32 Reserved5; /*0x18 */ +} MPI26_CONFIG_PAGE_PSWITCH_1, *PTR_MPI26_CONFIG_PAGE_PSWITCH_1, + Mpi26PCIeSwitchPage1_t, *pMpi26PCIeSwitchPage1_t; + +#define MPI26_PCIESWITCH1_PAGEVERSION (0x00) + +/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ + +/* defines for the Flags field */ +#define MPI26_PCIESWITCH1_2_RETIMER_PRESENCE (0x0002) +#define MPI26_PCIESWITCH1_RETIMER_PRESENCE (0x0001) + +/**************************************************************************** +* PCIe Device Config Pages (MPI v2.6 and later) +****************************************************************************/ + +/*PCIe Device Page 0 */ + +typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U16 Slot; /*0x08 */ + U16 EnclosureHandle; /*0x0A */ + U64 WWID; /*0x0C */ + U16 ParentDevHandle; /*0x14 */ + U8 PortNum; /*0x16 */ + U8 AccessStatus; /*0x17 */ + U16 DevHandle; /*0x18 */ + U8 PhysicalPort; /*0x1A */ + U8 Reserved1; /*0x1B */ + U32 DeviceInfo; /*0x1C */ + U32 Flags; /*0x20 */ + U8 SupportedLinkRates; /*0x24 */ + U8 MaxPortWidth; /*0x25 */ + U8 NegotiatedPortWidth; /*0x26 */ + U8 NegotiatedLinkRate; /*0x27 */ + U8 EnclosureLevel; /*0x28 */ + U8 Reserved2; /*0x29 */ + U16 Reserved3; /*0x2A */ + U8 ConnectorName[4]; /*0x2C */ + U32 Reserved4; /*0x30 */ + U32 Reserved5; /*0x34 */ +} MPI26_CONFIG_PAGE_PCIEDEV_0, *PTR_MPI26_CONFIG_PAGE_PCIEDEV_0, + Mpi26PCIeDevicePage0_t, *pMpi26PCIeDevicePage0_t; + +#define MPI26_PCIEDEVICE0_PAGEVERSION (0x01) + +/*values for PCIe Device Page 0 AccessStatus field */ +#define MPI26_PCIEDEV0_ASTATUS_NO_ERRORS (0x00) +#define MPI26_PCIEDEV0_ASTATUS_NEEDS_INITIALIZATION (0x04) +#define MPI26_PCIEDEV0_ASTATUS_CAPABILITY_FAILED (0x02) +#define MPI26_PCIEDEV0_ASTATUS_DEVICE_BLOCKED (0x07) +#define MPI26_PCIEDEV0_ASTATUS_MEMORY_SPACE_ACCESS_FAILED (0x08) +#define MPI26_PCIEDEV0_ASTATUS_UNSUPPORTED_DEVICE (0x09) +#define MPI26_PCIEDEV0_ASTATUS_MSIX_REQUIRED (0x0A) +#define MPI26_PCIEDEV0_ASTATUS_UNKNOWN (0x10) + +#define MPI26_PCIEDEV0_ASTATUS_NVME_READY_TIMEOUT (0x30) +#define MPI26_PCIEDEV0_ASTATUS_NVME_DEVCFG_UNSUPPORTED (0x31) +#define MPI26_PCIEDEV0_ASTATUS_NVME_IDENTIFY_FAILED (0x32) +#define MPI26_PCIEDEV0_ASTATUS_NVME_QCONFIG_FAILED (0x33) +#define MPI26_PCIEDEV0_ASTATUS_NVME_QCREATION_FAILED (0x34) +#define MPI26_PCIEDEV0_ASTATUS_NVME_EVENTCFG_FAILED (0x35) +#define MPI26_PCIEDEV0_ASTATUS_NVME_GET_FEATURE_STAT_FAILED (0x36) +#define MPI26_PCIEDEV0_ASTATUS_NVME_IDLE_TIMEOUT (0x37) +#define MPI26_PCIEDEV0_ASTATUS_NVME_FAILURE_STATUS (0x38) + +#define MPI26_PCIEDEV0_ASTATUS_INIT_FAIL_MAX (0x3F) + +/*see mpi2_pci.h for the MPI26_PCIE_DEVINFO_ defines used for the DeviceInfo + *field + */ + +/*values for PCIe Device Page 0 Flags field*/ +#define MPI26_PCIEDEV0_FLAGS_2_RETIMER_PRESENCE (0x00020000) +#define MPI26_PCIEDEV0_FLAGS_RETIMER_PRESENCE (0x00010000) +#define MPI26_PCIEDEV0_FLAGS_UNAUTHORIZED_DEVICE (0x00008000) +#define MPI26_PCIEDEV0_FLAGS_ENABLED_FAST_PATH (0x00004000) +#define MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE (0x00002000) +#define MPI26_PCIEDEV0_FLAGS_ASYNCHRONOUS_NOTIFICATION (0x00000400) +#define MPI26_PCIEDEV0_FLAGS_ATA_SW_PRESERVATION (0x00000200) +#define MPI26_PCIEDEV0_FLAGS_UNSUPPORTED_DEVICE (0x00000100) +#define MPI26_PCIEDEV0_FLAGS_ATA_48BIT_LBA_SUPPORTED (0x00000080) +#define MPI26_PCIEDEV0_FLAGS_ATA_SMART_SUPPORTED (0x00000040) +#define MPI26_PCIEDEV0_FLAGS_ATA_NCQ_SUPPORTED (0x00000020) +#define MPI26_PCIEDEV0_FLAGS_ATA_FUA_SUPPORTED (0x00000010) +#define MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID (0x00000002) +#define MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT (0x00000001) + +/* values for PCIe Device Page 0 SupportedLinkRates field */ +#define MPI26_PCIEDEV0_LINK_RATE_16_0_SUPPORTED (0x08) +#define MPI26_PCIEDEV0_LINK_RATE_8_0_SUPPORTED (0x04) +#define MPI26_PCIEDEV0_LINK_RATE_5_0_SUPPORTED (0x02) +#define MPI26_PCIEDEV0_LINK_RATE_2_5_SUPPORTED (0x01) + +/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ + + +/*PCIe Device Page 2 */ + +typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_2 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U16 DevHandle; /*0x08 */ + U8 ControllerResetTO; /* 0x0A */ + U8 Reserved1; /* 0x0B */ + U32 MaximumDataTransferSize; /*0x0C */ + U32 Capabilities; /*0x10 */ + U16 NOIOB; /* 0x14 */ + U16 ShutdownLatency; /* 0x16 */ + U16 VendorID; /* 0x18 */ + U16 DeviceID; /* 0x1A */ + U16 SubsystemVendorID; /* 0x1C */ + U16 SubsystemID; /* 0x1E */ + U8 RevisionID; /* 0x20 */ + U8 Reserved21[3]; /* 0x21 */ +} MPI26_CONFIG_PAGE_PCIEDEV_2, *PTR_MPI26_CONFIG_PAGE_PCIEDEV_2, + Mpi26PCIeDevicePage2_t, *pMpi26PCIeDevicePage2_t; + +#define MPI26_PCIEDEVICE2_PAGEVERSION (0x01) + +/*defines for PCIe Device Page 2 Capabilities field */ +#define MPI26_PCIEDEV2_CAP_DATA_BLK_ALIGN_AND_GRAN (0x00000008) +#define MPI26_PCIEDEV2_CAP_SGL_FORMAT (0x00000004) +#define MPI26_PCIEDEV2_CAP_BIT_BUCKET_SUPPORT (0x00000002) +#define MPI26_PCIEDEV2_CAP_SGL_SUPPORT (0x00000001) + +/* Defines for the NOIOB field */ +#define MPI26_PCIEDEV2_NOIOB_UNSUPPORTED (0x0000) + +/**************************************************************************** +* PCIe Link Config Pages (MPI v2.6 and later) +****************************************************************************/ + +/*PCIe Link Page 1 */ + +typedef struct _MPI26_CONFIG_PAGE_PCIELINK_1 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U8 Link; /*0x08 */ + U8 Reserved1; /*0x09 */ + U16 Reserved2; /*0x0A */ + U32 CorrectableErrorCount; /*0x0C */ + U16 NonFatalErrorCount; /*0x10 */ + U16 Reserved3; /*0x12 */ + U16 FatalErrorCount; /*0x14 */ + U16 Reserved4; /*0x16 */ +} MPI26_CONFIG_PAGE_PCIELINK_1, *PTR_MPI26_CONFIG_PAGE_PCIELINK_1, + Mpi26PcieLinkPage1_t, *pMpi26PcieLinkPage1_t; + +#define MPI26_PCIELINK1_PAGEVERSION (0x00) + +/*PCIe Link Page 2 */ + +typedef struct _MPI26_PCIELINK2_LINK_EVENT { + U8 LinkEventCode; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U32 LinkEventInfo; /*0x04 */ +} MPI26_PCIELINK2_LINK_EVENT, *PTR_MPI26_PCIELINK2_LINK_EVENT, + Mpi26PcieLink2LinkEvent_t, *pMpi26PcieLink2LinkEvent_t; + +/*use MPI26_PCIELINK3_EVTCODE_ for the LinkEventCode field */ + + +/* + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumLinkEvents at runtime before using LinkEvent[]. + */ + +typedef struct _MPI26_CONFIG_PAGE_PCIELINK_2 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U8 Link; /*0x08 */ + U8 Reserved1; /*0x09 */ + U16 Reserved2; /*0x0A */ + U8 NumLinkEvents; /*0x0C */ + U8 Reserved3; /*0x0D */ + U16 Reserved4; /*0x0E */ + MPI26_PCIELINK2_LINK_EVENT + LinkEvent[]; /*0x10 */ +} MPI26_CONFIG_PAGE_PCIELINK_2, *PTR_MPI26_CONFIG_PAGE_PCIELINK_2, + Mpi26PcieLinkPage2_t, *pMpi26PcieLinkPage2_t; + +#define MPI26_PCIELINK2_PAGEVERSION (0x00) + +/*PCIe Link Page 3 */ + +typedef struct _MPI26_PCIELINK3_LINK_EVENT_CONFIG { + U8 LinkEventCode; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U8 CounterType; /*0x04 */ + U8 ThresholdWindow; /*0x05 */ + U8 TimeUnits; /*0x06 */ + U8 Reserved3; /*0x07 */ + U32 EventThreshold; /*0x08 */ + U16 ThresholdFlags; /*0x0C */ + U16 Reserved4; /*0x0E */ +} MPI26_PCIELINK3_LINK_EVENT_CONFIG, *PTR_MPI26_PCIELINK3_LINK_EVENT_CONFIG, + Mpi26PcieLink3LinkEventConfig_t, *pMpi26PcieLink3LinkEventConfig_t; + +/*values for LinkEventCode field */ +#define MPI26_PCIELINK3_EVTCODE_NO_EVENT (0x00) +#define MPI26_PCIELINK3_EVTCODE_CORRECTABLE_ERROR_RECEIVED (0x01) +#define MPI26_PCIELINK3_EVTCODE_NON_FATAL_ERROR_RECEIVED (0x02) +#define MPI26_PCIELINK3_EVTCODE_FATAL_ERROR_RECEIVED (0x03) +#define MPI26_PCIELINK3_EVTCODE_DATA_LINK_ERROR_DETECTED (0x04) +#define MPI26_PCIELINK3_EVTCODE_TRANSACTION_LAYER_ERROR_DETECTED (0x05) +#define MPI26_PCIELINK3_EVTCODE_TLP_ECRC_ERROR_DETECTED (0x06) +#define MPI26_PCIELINK3_EVTCODE_POISONED_TLP (0x07) +#define MPI26_PCIELINK3_EVTCODE_RECEIVED_NAK_DLLP (0x08) +#define MPI26_PCIELINK3_EVTCODE_SENT_NAK_DLLP (0x09) +#define MPI26_PCIELINK3_EVTCODE_LTSSM_RECOVERY_STATE (0x0A) +#define MPI26_PCIELINK3_EVTCODE_LTSSM_RXL0S_STATE (0x0B) +#define MPI26_PCIELINK3_EVTCODE_LTSSM_TXL0S_STATE (0x0C) +#define MPI26_PCIELINK3_EVTCODE_LTSSM_L1_STATE (0x0D) +#define MPI26_PCIELINK3_EVTCODE_LTSSM_DISABLED_STATE (0x0E) +#define MPI26_PCIELINK3_EVTCODE_LTSSM_HOT_RESET_STATE (0x0F) +#define MPI26_PCIELINK3_EVTCODE_SYSTEM_ERROR (0x10) +#define MPI26_PCIELINK3_EVTCODE_DECODE_ERROR (0x11) +#define MPI26_PCIELINK3_EVTCODE_DISPARITY_ERROR (0x12) + +/*values for the CounterType field */ +#define MPI26_PCIELINK3_COUNTER_TYPE_WRAPPING (0x00) +#define MPI26_PCIELINK3_COUNTER_TYPE_SATURATING (0x01) +#define MPI26_PCIELINK3_COUNTER_TYPE_PEAK_VALUE (0x02) + +/*values for the TimeUnits field */ +#define MPI26_PCIELINK3_TM_UNITS_10_MICROSECONDS (0x00) +#define MPI26_PCIELINK3_TM_UNITS_100_MICROSECONDS (0x01) +#define MPI26_PCIELINK3_TM_UNITS_1_MILLISECOND (0x02) +#define MPI26_PCIELINK3_TM_UNITS_10_MILLISECONDS (0x03) + +/*values for the ThresholdFlags field */ +#define MPI26_PCIELINK3_TFLAGS_EVENT_NOTIFY (0x0001) + +/* + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumLinkEvents at runtime before using LinkEventConfig[]. + */ + +typedef struct _MPI26_CONFIG_PAGE_PCIELINK_3 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U8 Link; /*0x08 */ + U8 Reserved1; /*0x09 */ + U16 Reserved2; /*0x0A */ + U8 NumLinkEvents; /*0x0C */ + U8 Reserved3; /*0x0D */ + U16 Reserved4; /*0x0E */ + MPI26_PCIELINK3_LINK_EVENT_CONFIG + LinkEventConfig[]; /*0x10 */ +} MPI26_CONFIG_PAGE_PCIELINK_3, *PTR_MPI26_CONFIG_PAGE_PCIELINK_3, + Mpi26PcieLinkPage3_t, *pMpi26PcieLinkPage3_t; + +#define MPI26_PCIELINK3_PAGEVERSION (0x00) + + #endif |