diff options
Diffstat (limited to 'drivers/scsi/pm8001/pm8001_init.c')
| -rw-r--r-- | drivers/scsi/pm8001/pm8001_init.c | 406 |
1 files changed, 206 insertions, 200 deletions
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index 7e589fe3e010..9acca83d6958 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -43,7 +43,8 @@ #include "pm8001_chips.h" #include "pm80xx_hwi.h" -static ulong logging_level = PM8001_FAIL_LOGGING | PM8001_IOERR_LOGGING; +static ulong logging_level = PM8001_FAIL_LOGGING | PM8001_IOERR_LOGGING | + PM8001_EVENT_LOGGING | PM8001_INIT_LOGGING; module_param(logging_level, ulong, 0644); MODULE_PARM_DESC(logging_level, " bits for enabling logging info."); @@ -55,6 +56,22 @@ MODULE_PARM_DESC(link_rate, "Enable link rate.\n" " 4: Link rate 6.0G\n" " 8: Link rate 12.0G\n"); +bool pm8001_use_msix = true; +module_param_named(use_msix, pm8001_use_msix, bool, 0444); +MODULE_PARM_DESC(zoned, "Use MSIX interrupts. Default: true"); + +static bool pm8001_use_tasklet = true; +module_param_named(use_tasklet, pm8001_use_tasklet, bool, 0444); +MODULE_PARM_DESC(zoned, "Use MSIX interrupts. Default: true"); + +static bool pm8001_read_wwn = true; +module_param_named(read_wwn, pm8001_read_wwn, bool, 0444); +MODULE_PARM_DESC(zoned, "Get WWN from the controller. Default: true"); + +uint pcs_event_log_severity = 0x03; +module_param(pcs_event_log_severity, int, 0644); +MODULE_PARM_DESC(pcs_event_log_severity, "PCS event log severity level"); + static struct scsi_transport_template *pm8001_stt; static int pm8001_init_ccb_tag(struct pm8001_hba_info *); @@ -87,40 +104,26 @@ static void pm8001_map_queues(struct Scsi_Host *shost) struct pm8001_hba_info *pm8001_ha = sha->lldd_ha; struct blk_mq_queue_map *qmap = &shost->tag_set.map[HCTX_TYPE_DEFAULT]; - if (pm8001_ha->number_of_intr > 1) - blk_mq_pci_map_queues(qmap, pm8001_ha->pdev, 1); + if (pm8001_ha->number_of_intr > 1) { + blk_mq_map_hw_queues(qmap, &pm8001_ha->pdev->dev, 1); + return; + } - return blk_mq_map_queues(qmap); + blk_mq_map_queues(qmap); } /* * The main structure which LLDD must register for scsi core. */ -static struct scsi_host_template pm8001_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .proc_name = DRV_NAME, - .queuecommand = sas_queuecommand, - .dma_need_drain = ata_scsi_dma_need_drain, - .target_alloc = sas_target_alloc, - .slave_configure = sas_slave_configure, +static const struct scsi_host_template pm8001_sht = { + LIBSAS_SHT_BASE .scan_finished = pm8001_scan_finished, .scan_start = pm8001_scan_start, - .change_queue_depth = sas_change_queue_depth, - .bios_param = sas_bios_param, .can_queue = 1, - .this_id = -1, .sg_tablesize = PM8001_MAX_DMA_SG, - .max_sectors = SCSI_DEFAULT_MAX_SECTORS, - .eh_device_reset_handler = sas_eh_device_reset_handler, - .eh_target_reset_handler = sas_eh_target_reset_handler, - .slave_alloc = sas_slave_alloc, - .target_destroy = sas_target_destroy, - .ioctl = sas_ioctl, -#ifdef CONFIG_COMPAT - .compat_ioctl = sas_ioctl, -#endif + .max_sectors = PM8001_MAX_SECTORS, .shost_groups = pm8001_host_groups, + .sdev_groups = pm8001_sdev_groups, .track_queue_depth = 1, .cmd_per_lun = 32, .map_queues = pm8001_map_queues, @@ -161,10 +164,8 @@ static void pm8001_phy_init(struct pm8001_hba_info *pm8001_ha, int phy_id) phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS; phy->maximum_linkrate = SAS_LINK_RATE_6_0_GBPS; sas_phy->enabled = (phy_id < pm8001_ha->chip->n_phy) ? 1 : 0; - sas_phy->class = SAS; sas_phy->iproto = SAS_PROTOCOL_ALL; sas_phy->tproto = 0; - sas_phy->type = PHY_TYPE_PHYSICAL; sas_phy->role = PHY_ROLE_INITIATOR; sas_phy->oob_mode = OOB_NOT_CONNECTED; sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN; @@ -201,8 +202,6 @@ static void pm8001_free(struct pm8001_hba_info *pm8001_ha) kfree(pm8001_ha); } -#ifdef PM8001_USE_TASKLET - /** * pm8001_tasklet() - tasklet for 64 msi-x interrupt handler * @opaque: the passed general host adapter struct @@ -210,16 +209,67 @@ static void pm8001_free(struct pm8001_hba_info *pm8001_ha) */ static void pm8001_tasklet(unsigned long opaque) { - struct pm8001_hba_info *pm8001_ha; - struct isr_param *irq_vector; + struct isr_param *irq_vector = (struct isr_param *)opaque; + struct pm8001_hba_info *pm8001_ha = irq_vector->drv_inst; + + if (WARN_ON_ONCE(!pm8001_ha)) + return; - irq_vector = (struct isr_param *)opaque; - pm8001_ha = irq_vector->drv_inst; - if (unlikely(!pm8001_ha)) - BUG_ON(1); PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id); } -#endif + +static void pm8001_init_tasklet(struct pm8001_hba_info *pm8001_ha) +{ + int i; + + if (!pm8001_use_tasklet) + return; + + /* Tasklet for non msi-x interrupt handler */ + if ((!pm8001_ha->pdev->msix_cap || !pci_msi_enabled()) || + (pm8001_ha->chip_id == chip_8001)) { + tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet, + (unsigned long)&(pm8001_ha->irq_vector[0])); + return; + } + for (i = 0; i < PM8001_MAX_MSIX_VEC; i++) + tasklet_init(&pm8001_ha->tasklet[i], pm8001_tasklet, + (unsigned long)&(pm8001_ha->irq_vector[i])); +} + +static void pm8001_kill_tasklet(struct pm8001_hba_info *pm8001_ha) +{ + int i; + + if (!pm8001_use_tasklet) + return; + + /* For non-msix and msix interrupts */ + if ((!pm8001_ha->pdev->msix_cap || !pci_msi_enabled()) || + (pm8001_ha->chip_id == chip_8001)) { + tasklet_kill(&pm8001_ha->tasklet[0]); + return; + } + + for (i = 0; i < PM8001_MAX_MSIX_VEC; i++) + tasklet_kill(&pm8001_ha->tasklet[i]); +} + +static irqreturn_t pm8001_handle_irq(struct pm8001_hba_info *pm8001_ha, + int irq) +{ + if (unlikely(!pm8001_ha)) + return IRQ_NONE; + + if (!PM8001_CHIP_DISP->is_our_interrupt(pm8001_ha)) + return IRQ_NONE; + + if (!pm8001_use_tasklet) + return PM8001_CHIP_DISP->isr(pm8001_ha, irq); + + tasklet_schedule(&pm8001_ha->tasklet[irq]); + return IRQ_HANDLED; +} /** * pm8001_interrupt_handler_msix - main MSIX interrupt handler. @@ -231,22 +281,10 @@ static void pm8001_tasklet(unsigned long opaque) */ static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque) { - struct isr_param *irq_vector; - struct pm8001_hba_info *pm8001_ha; - irqreturn_t ret = IRQ_HANDLED; - irq_vector = (struct isr_param *)opaque; - pm8001_ha = irq_vector->drv_inst; + struct isr_param *irq_vector = (struct isr_param *)opaque; + struct pm8001_hba_info *pm8001_ha = irq_vector->drv_inst; - if (unlikely(!pm8001_ha)) - return IRQ_NONE; - if (!PM8001_CHIP_DISP->is_our_interrupt(pm8001_ha)) - return IRQ_NONE; -#ifdef PM8001_USE_TASKLET - tasklet_schedule(&pm8001_ha->tasklet[irq_vector->irq_id]); -#else - ret = PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id); -#endif - return ret; + return pm8001_handle_irq(pm8001_ha, irq_vector->irq_id); } /** @@ -257,25 +295,14 @@ static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque) static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id) { - struct pm8001_hba_info *pm8001_ha; - irqreturn_t ret = IRQ_HANDLED; struct sas_ha_struct *sha = dev_id; - pm8001_ha = sha->lldd_ha; - if (unlikely(!pm8001_ha)) - return IRQ_NONE; - if (!PM8001_CHIP_DISP->is_our_interrupt(pm8001_ha)) - return IRQ_NONE; + struct pm8001_hba_info *pm8001_ha = sha->lldd_ha; -#ifdef PM8001_USE_TASKLET - tasklet_schedule(&pm8001_ha->tasklet[0]); -#else - ret = PM8001_CHIP_DISP->isr(pm8001_ha, 0); -#endif - return ret; + return pm8001_handle_irq(pm8001_ha, 0); } -static u32 pm8001_setup_irq(struct pm8001_hba_info *pm8001_ha); static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha); +static void pm8001_free_irq(struct pm8001_hba_info *pm8001_ha); /** * pm8001_alloc - initiate our hba structure and 6 DMAs area. @@ -295,13 +322,6 @@ static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha, pm8001_dbg(pm8001_ha, INIT, "pm8001_alloc: PHY:%x\n", pm8001_ha->chip->n_phy); - /* Setup Interrupt */ - rc = pm8001_setup_irq(pm8001_ha); - if (rc) { - pm8001_dbg(pm8001_ha, FAIL, - "pm8001_setup_irq failed [ret: %d]\n", rc); - goto err_out; - } /* Request Interrupt */ rc = pm8001_request_irq(pm8001_ha); if (rc) @@ -432,9 +452,6 @@ static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha, } for (i = 0; i < PM8001_MAX_DEVICES; i++) { pm8001_ha->devices[i].dev_type = SAS_PHY_UNUSED; - pm8001_ha->devices[i].id = i; - pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES; - atomic_set(&pm8001_ha->devices[i].running_req, 0); } pm8001_ha->flags = PM8001F_INIT_TIME; return 0; @@ -520,7 +537,6 @@ static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev, { struct pm8001_hba_info *pm8001_ha; struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost); - int j; pm8001_ha = sha->lldd_ha; if (!pm8001_ha) @@ -536,6 +552,7 @@ static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev, pm8001_ha->id = pm8001_id++; pm8001_ha->logging_level = logging_level; pm8001_ha->non_fatal_count = 0; + mutex_init(&pm8001_ha->iop_log_lock); if (link_rate >= 1 && link_rate <= 15) pm8001_ha->link_rate = (link_rate << 8); else { @@ -551,17 +568,8 @@ static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev, else pm8001_ha->iomb_size = IOMB_SIZE_SPC; -#ifdef PM8001_USE_TASKLET - /* Tasklet for non msi-x interrupt handler */ - if ((!pdev->msix_cap || !pci_msi_enabled()) - || (pm8001_ha->chip_id == chip_8001)) - tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet, - (unsigned long)&(pm8001_ha->irq_vector[0])); - else - for (j = 0; j < PM8001_MAX_MSIX_VEC; j++) - tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet, - (unsigned long)&(pm8001_ha->irq_vector[j])); -#endif + pm8001_init_tasklet(pm8001_ha); + if (pm8001_ioremap(pm8001_ha)) goto failed_pci_alloc; if (!pm8001_alloc(pm8001_ha, ent)) @@ -653,10 +661,9 @@ static void pm8001_post_sas_ha_init(struct Scsi_Host *shost, sha->sas_ha_name = DRV_NAME; sha->dev = pm8001_ha->dev; sha->strict_wide_ports = 1; - sha->lldd_module = THIS_MODULE; sha->sas_addr = &pm8001_ha->sas_addr[0]; sha->num_phys = chip_info->n_phy; - sha->core.shost = shost; + sha->shost = shost; } /** @@ -666,19 +673,36 @@ static void pm8001_post_sas_ha_init(struct Scsi_Host *shost, * Currently we just set the fixed SAS address to our HBA, for manufacture, * it should read from the EEPROM */ -static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha) +static int pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha) { - u8 i, j; - u8 sas_add[8]; -#ifdef PM8001_READ_VPD - /* For new SPC controllers WWN is stored in flash vpd - * For SPC/SPCve controllers WWN is stored in EEPROM - * For Older SPC WWN is stored in NVMD - */ DECLARE_COMPLETION_ONSTACK(completion); struct pm8001_ioctl_payload payload; + unsigned long time_remaining; + u8 sas_add[8]; u16 deviceid; int rc; + u8 i, j; + + if (!pm8001_read_wwn) { + __be64 dev_sas_addr = cpu_to_be64(0x50010c600047f9d0ULL); + + for (i = 0; i < pm8001_ha->chip->n_phy; i++) + memcpy(&pm8001_ha->phy[i].dev_sas_addr, &dev_sas_addr, + SAS_ADDR_SIZE); + memcpy(pm8001_ha->sas_addr, &pm8001_ha->phy[0].dev_sas_addr, + SAS_ADDR_SIZE); + return 0; + } + + /* + * For new SPC controllers WWN is stored in flash vpd. For SPC/SPCve + * controllers WWN is stored in EEPROM. And for Older SPC WWN is stored + * in NVMD. + */ + if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) { + pm8001_dbg(pm8001_ha, FAIL, "controller is in fatal error state\n"); + return -EIO; + } pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid); pm8001_ha->nvmd_completion = &completion; @@ -703,16 +727,23 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha) payload.offset = 0; payload.func_specific = kzalloc(payload.rd_length, GFP_KERNEL); if (!payload.func_specific) { - pm8001_dbg(pm8001_ha, INIT, "mem alloc fail\n"); - return; + pm8001_dbg(pm8001_ha, FAIL, "mem alloc fail\n"); + return -ENOMEM; } rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload); if (rc) { kfree(payload.func_specific); - pm8001_dbg(pm8001_ha, INIT, "nvmd failed\n"); - return; + pm8001_dbg(pm8001_ha, FAIL, "nvmd failed\n"); + return -EIO; } - wait_for_completion(&completion); + time_remaining = wait_for_completion_timeout(&completion, + secs_to_jiffies(60)); // 1 min + if (!time_remaining) { + kfree(payload.func_specific); + pm8001_dbg(pm8001_ha, FAIL, "get_nvmd_req timeout\n"); + return -EIO; + } + for (i = 0, j = 0; i <= 7; i++, j++) { if (pm8001_ha->chip_id == chip_8001) { @@ -741,16 +772,8 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha) pm8001_ha->phy[i].dev_sas_addr); } kfree(payload.func_specific); -#else - for (i = 0; i < pm8001_ha->chip->n_phy; i++) { - pm8001_ha->phy[i].dev_sas_addr = 0x50010c600047f9d0ULL; - pm8001_ha->phy[i].dev_sas_addr = - cpu_to_be64((u64) - (*(u64 *)&pm8001_ha->phy[i].dev_sas_addr)); - } - memcpy(pm8001_ha->sas_addr, &pm8001_ha->phy[0].dev_sas_addr, - SAS_ADDR_SIZE); -#endif + + return 0; } /* @@ -759,13 +782,13 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha) */ static int pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha) { - -#ifdef PM8001_READ_VPD - /*OPTION ROM FLASH read for the SPC cards */ DECLARE_COMPLETION_ONSTACK(completion); struct pm8001_ioctl_payload payload; int rc; + if (!pm8001_read_wwn) + return 0; + pm8001_ha->nvmd_completion = &completion; /* SAS ADDRESS read from flash / EEPROM */ payload.minor_function = 6; @@ -784,7 +807,7 @@ static int pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha) wait_for_completion(&completion); pm8001_set_phy_profile(pm8001_ha, sizeof(u8), payload.func_specific); kfree(payload.func_specific); -#endif + return 0; } @@ -935,7 +958,6 @@ static int pm8001_configure_phy_settings(struct pm8001_hba_info *pm8001_ha) } } -#ifdef PM8001_USE_MSIX /** * pm8001_setup_msix - enable MSI-X interrupt * @pm8001_ha: our ha struct. @@ -1017,21 +1039,6 @@ static u32 pm8001_request_msix(struct pm8001_hba_info *pm8001_ha) return rc; } -#endif - -static u32 pm8001_setup_irq(struct pm8001_hba_info *pm8001_ha) -{ - struct pci_dev *pdev; - - pdev = pm8001_ha->pdev; - -#ifdef PM8001_USE_MSIX - if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) - return pm8001_setup_msix(pm8001_ha); - pm8001_dbg(pm8001_ha, INIT, "MSIX not supported!!!\n"); -#endif - return 0; -} /** * pm8001_request_irq - register interrupt @@ -1039,27 +1046,59 @@ static u32 pm8001_setup_irq(struct pm8001_hba_info *pm8001_ha) */ static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha) { - struct pci_dev *pdev; + struct pci_dev *pdev = pm8001_ha->pdev; int rc; - pdev = pm8001_ha->pdev; + if (pm8001_use_msix && pci_find_capability(pdev, PCI_CAP_ID_MSIX)) { + rc = pm8001_setup_msix(pm8001_ha); + if (rc) { + pm8001_dbg(pm8001_ha, FAIL, + "pm8001_setup_irq failed [ret: %d]\n", rc); + return rc; + } -#ifdef PM8001_USE_MSIX - if (pdev->msix_cap && pci_msi_enabled()) - return pm8001_request_msix(pm8001_ha); - else { - pm8001_dbg(pm8001_ha, INIT, "MSIX not supported!!!\n"); - goto intx; + if (!pdev->msix_cap || !pci_msi_enabled()) + goto use_intx; + + rc = pm8001_request_msix(pm8001_ha); + if (rc) + return rc; + + pm8001_ha->use_msix = true; + + return 0; } -#endif -intx: - /* initialize the INT-X interrupt */ +use_intx: + /* Initialize the INT-X interrupt */ + pm8001_dbg(pm8001_ha, INIT, "MSIX not supported!!!\n"); + pm8001_ha->use_msix = false; pm8001_ha->irq_vector[0].irq_id = 0; pm8001_ha->irq_vector[0].drv_inst = pm8001_ha; - rc = request_irq(pdev->irq, pm8001_interrupt_handler_intx, IRQF_SHARED, - pm8001_ha->name, SHOST_TO_SAS_HA(pm8001_ha->shost)); - return rc; + + return request_irq(pdev->irq, pm8001_interrupt_handler_intx, + IRQF_SHARED, pm8001_ha->name, + SHOST_TO_SAS_HA(pm8001_ha->shost)); +} + +static void pm8001_free_irq(struct pm8001_hba_info *pm8001_ha) +{ + struct pci_dev *pdev = pm8001_ha->pdev; + int i; + + if (pm8001_ha->use_msix) { + for (i = 0; i < pm8001_ha->number_of_intr; i++) + synchronize_irq(pci_irq_vector(pdev, i)); + + for (i = 0; i < pm8001_ha->number_of_intr; i++) + free_irq(pci_irq_vector(pdev, i), &pm8001_ha->irq_vector[i]); + + pci_free_irq_vectors(pdev); + return; + } + + /* INT-X */ + free_irq(pm8001_ha->irq, pm8001_ha->sas); } /** @@ -1166,7 +1205,9 @@ static int pm8001_pci_probe(struct pci_dev *pdev, pm80xx_set_thermal_config(pm8001_ha); } - pm8001_init_sas_add(pm8001_ha); + rc = pm8001_init_sas_add(pm8001_ha); + if (rc) + goto err_out_shost; /* phy setting support for motherboard controller */ rc = pm8001_configure_phy_settings(pm8001_ha); if (rc) @@ -1255,33 +1296,17 @@ err_out: static void pm8001_pci_remove(struct pci_dev *pdev) { struct sas_ha_struct *sha = pci_get_drvdata(pdev); - struct pm8001_hba_info *pm8001_ha; - int i, j; - pm8001_ha = sha->lldd_ha; + struct pm8001_hba_info *pm8001_ha = sha->lldd_ha; + int i; + sas_unregister_ha(sha); sas_remove_host(pm8001_ha->shost); list_del(&pm8001_ha->list); PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF); PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha); -#ifdef PM8001_USE_MSIX - for (i = 0; i < pm8001_ha->number_of_intr; i++) - synchronize_irq(pci_irq_vector(pdev, i)); - for (i = 0; i < pm8001_ha->number_of_intr; i++) - free_irq(pci_irq_vector(pdev, i), &pm8001_ha->irq_vector[i]); - pci_free_irq_vectors(pdev); -#else - free_irq(pm8001_ha->irq, sha); -#endif -#ifdef PM8001_USE_TASKLET - /* For non-msix and msix interrupts */ - if ((!pdev->msix_cap || !pci_msi_enabled()) || - (pm8001_ha->chip_id == chip_8001)) - tasklet_kill(&pm8001_ha->tasklet[0]); - else - for (j = 0; j < PM8001_MAX_MSIX_VEC; j++) - tasklet_kill(&pm8001_ha->tasklet[j]); -#endif + pm8001_free_irq(pm8001_ha); + pm8001_kill_tasklet(pm8001_ha); scsi_host_put(pm8001_ha->shost); for (i = 0; i < pm8001_ha->ccb_count; i++) { @@ -1312,7 +1337,7 @@ static int __maybe_unused pm8001_pci_suspend(struct device *dev) struct pci_dev *pdev = to_pci_dev(dev); struct sas_ha_struct *sha = pci_get_drvdata(pdev); struct pm8001_hba_info *pm8001_ha = sha->lldd_ha; - int i, j; + sas_suspend_ha(sha); flush_workqueue(pm8001_wq); scsi_block_requests(pm8001_ha->shost); @@ -1322,24 +1347,10 @@ static int __maybe_unused pm8001_pci_suspend(struct device *dev) } PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF); PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha); -#ifdef PM8001_USE_MSIX - for (i = 0; i < pm8001_ha->number_of_intr; i++) - synchronize_irq(pci_irq_vector(pdev, i)); - for (i = 0; i < pm8001_ha->number_of_intr; i++) - free_irq(pci_irq_vector(pdev, i), &pm8001_ha->irq_vector[i]); - pci_free_irq_vectors(pdev); -#else - free_irq(pm8001_ha->irq, sha); -#endif -#ifdef PM8001_USE_TASKLET - /* For non-msix and msix interrupts */ - if ((!pdev->msix_cap || !pci_msi_enabled()) || - (pm8001_ha->chip_id == chip_8001)) - tasklet_kill(&pm8001_ha->tasklet[0]); - else - for (j = 0; j < PM8001_MAX_MSIX_VEC; j++) - tasklet_kill(&pm8001_ha->tasklet[j]); -#endif + + pm8001_free_irq(pm8001_ha); + pm8001_kill_tasklet(pm8001_ha); + pm8001_info(pm8001_ha, "pdev=0x%p, slot=%s, entering " "suspended state\n", pdev, pm8001_ha->name); @@ -1358,7 +1369,7 @@ static int __maybe_unused pm8001_pci_resume(struct device *dev) struct sas_ha_struct *sha = pci_get_drvdata(pdev); struct pm8001_hba_info *pm8001_ha; int rc; - u8 i = 0, j; + u8 i = 0; DECLARE_COMPLETION_ONSTACK(completion); pm8001_ha = sha->lldd_ha; @@ -1386,17 +1397,9 @@ static int __maybe_unused pm8001_pci_resume(struct device *dev) rc = pm8001_request_irq(pm8001_ha); if (rc) goto err_out_disable; -#ifdef PM8001_USE_TASKLET - /* Tasklet for non msi-x interrupt handler */ - if ((!pdev->msix_cap || !pci_msi_enabled()) || - (pm8001_ha->chip_id == chip_8001)) - tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet, - (unsigned long)&(pm8001_ha->irq_vector[0])); - else - for (j = 0; j < PM8001_MAX_MSIX_VEC; j++) - tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet, - (unsigned long)&(pm8001_ha->irq_vector[j])); -#endif + + pm8001_init_tasklet(pm8001_ha); + PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0); if (pm8001_ha->chip_id != chip_8001) { for (i = 1; i < pm8001_ha->number_of_intr; i++) @@ -1433,7 +1436,7 @@ err_out_disable: /* update of pci device, vendor id and driver data with * unique value for each of the controller */ -static struct pci_device_id pm8001_pci_table[] = { +static const struct pci_device_id pm8001_pci_table[] = { { PCI_VDEVICE(PMC_Sierra, 0x8001), chip_8001 }, { PCI_VDEVICE(PMC_Sierra, 0x8006), chip_8006 }, { PCI_VDEVICE(ADAPTEC2, 0x8006), chip_8006 }, @@ -1528,7 +1531,10 @@ static int __init pm8001_init(void) { int rc = -ENOMEM; - pm8001_wq = alloc_workqueue("pm80xx", 0, 0); + if (pm8001_use_tasklet && !pm8001_use_msix) + pm8001_use_tasklet = false; + + pm8001_wq = alloc_workqueue("pm80xx", WQ_PERCPU, 0); if (!pm8001_wq) goto err; |
