diff options
Diffstat (limited to 'drivers/scsi/scsi_scan.c')
| -rw-r--r-- | drivers/scsi/scsi_scan.c | 260 |
1 files changed, 172 insertions, 88 deletions
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 44680f65ea14..4833b8fe251b 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -35,7 +35,7 @@ #include <linux/spinlock.h> #include <linux/async.h> #include <linux/slab.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> @@ -151,8 +151,9 @@ int scsi_complete_async_scans(void) struct async_scan_data *data; do { - if (list_empty(&scanning_hosts)) - return 0; + scoped_guard(spinlock, &async_scan_lock) + if (list_empty(&scanning_hosts)) + return 0; /* If we can't get memory immediately, that's OK. Just * sleep a little. Even if we never get memory, the async * scans will finish eventually. @@ -220,6 +221,7 @@ static int scsi_realloc_sdev_budget_map(struct scsi_device *sdev, int new_shift = sbitmap_calculate_shift(depth); bool need_alloc = !sdev->budget_map.map; bool need_free = false; + unsigned int memflags; int ret; struct sbitmap sb_backup; @@ -227,7 +229,7 @@ static int scsi_realloc_sdev_budget_map(struct scsi_device *sdev, /* * realloc if new shift is calculated, which is caused by setting - * up one new default queue depth after calling ->slave_configure + * up one new default queue depth after calling ->sdev_configure */ if (!need_alloc && new_shift != sdev->budget_map.shift) need_alloc = need_free = true; @@ -240,12 +242,12 @@ static int scsi_realloc_sdev_budget_map(struct scsi_device *sdev, * and here disk isn't added yet, so freezing is pretty fast */ if (need_free) { - blk_mq_freeze_queue(sdev->request_queue); + memflags = blk_mq_freeze_queue(sdev->request_queue); sb_backup = sdev->budget_map; } ret = sbitmap_init_node(&sdev->budget_map, scsi_device_max_queue_depth(sdev), - new_shift, GFP_KERNEL, + new_shift, GFP_NOIO, sdev->request_queue->node, false, true); if (!ret) sbitmap_resize(&sdev->budget_map, depth); @@ -256,7 +258,7 @@ static int scsi_realloc_sdev_budget_map(struct scsi_device *sdev, else sbitmap_free(&sb_backup); ret = 0; - blk_mq_unfreeze_queue(sdev->request_queue); + blk_mq_unfreeze_queue(sdev->request_queue, memflags); } return ret; } @@ -265,7 +267,7 @@ static int scsi_realloc_sdev_budget_map(struct scsi_device *sdev, * scsi_alloc_sdev - allocate and setup a scsi_Device * @starget: which target to allocate a &scsi_device for * @lun: which lun - * @hostdata: usually NULL and set by ->slave_alloc instead + * @hostdata: usually NULL and set by ->sdev_init instead * * Description: * Allocate, initialize for io, and return a pointer to a scsi_Device. @@ -283,6 +285,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget, struct request_queue *q; int display_failure_msg = 1, ret; struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + struct queue_limits lim; sdev = kzalloc(sizeof(*sdev) + shost->transportt->device_size, GFP_KERNEL); @@ -311,11 +314,11 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget, sdev->sdev_gendev.parent = get_device(&starget->dev); sdev->sdev_target = starget; - /* usually NULL and set by ->slave_alloc instead */ + /* usually NULL and set by ->sdev_init instead */ sdev->hostdata = hostdata; /* if the device needs this changing, it may do so in the - * slave_configure function */ + * sdev_configure function */ sdev->max_device_blocked = SCSI_DEFAULT_DEVICE_BLOCKED; /* @@ -332,7 +335,8 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget, sdev->sg_reserved_size = INT_MAX; - q = blk_mq_init_queue(&sdev->host->tag_set); + scsi_init_limits(shost, &lim); + q = blk_mq_alloc_queue(&sdev->host->tag_set, &lim, sdev); if (IS_ERR(q)) { /* release fn is set up in scsi_sysfs_device_initialise, so * have to free and put manually here */ @@ -342,8 +346,6 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget, } kref_get(&sdev->host->tagset_refcnt); sdev->request_queue = q; - q->queuedata = sdev; - __scsi_init_queue(sdev->host, q); depth = sdev->host->cmd_per_lun ?: 1; @@ -363,8 +365,8 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget, scsi_sysfs_device_initialize(sdev); - if (shost->hostt->slave_alloc) { - ret = shost->hostt->slave_alloc(sdev); + if (shost->hostt->sdev_init) { + ret = shost->hostt->sdev_init(sdev); if (ret) { /* * if LLDD reports slave not present, don't clutter @@ -412,7 +414,7 @@ static void scsi_target_dev_release(struct device *dev) put_device(parent); } -static struct device_type scsi_target_type = { +static const struct device_type scsi_target_type = { .name = "scsi_target", .release = scsi_target_dev_release, }; @@ -626,6 +628,7 @@ void scsi_sanitize_inquiry_string(unsigned char *s, int len) } EXPORT_SYMBOL(scsi_sanitize_inquiry_string); + /** * scsi_probe_lun - probe a single LUN using a SCSI INQUIRY * @sdev: scsi_device to probe @@ -647,10 +650,36 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result, int first_inquiry_len, try_inquiry_len, next_inquiry_len; int response_len = 0; int pass, count, result, resid; - struct scsi_sense_hdr sshdr; + struct scsi_failure failure_defs[] = { + /* + * not-ready to ready transition [asc/ascq=0x28/0x0] or + * power-on, reset [asc/ascq=0x29/0x0], continue. INQUIRY + * should not yield UNIT_ATTENTION but many buggy devices do + * so anyway. + */ + { + .sense = UNIT_ATTENTION, + .asc = 0x28, + .result = SAM_STAT_CHECK_CONDITION, + }, + { + .sense = UNIT_ATTENTION, + .asc = 0x29, + .result = SAM_STAT_CHECK_CONDITION, + }, + { + .allowed = 1, + .result = DID_TIME_OUT << 16, + }, + {} + }; + struct scsi_failures failures = { + .total_allowed = 3, + .failure_definitions = failure_defs, + }; const struct scsi_exec_args exec_args = { - .sshdr = &sshdr, .resid = &resid, + .failures = &failures, }; *bflags = 0; @@ -668,6 +697,8 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result, pass, try_inquiry_len)); /* Each pass gets up to three chances to ignore Unit Attention */ + scsi_failures_reset_retries(&failures); + for (count = 0; count < 3; ++count) { memset(scsi_cmd, 0, 6); scsi_cmd[0] = INQUIRY; @@ -684,22 +715,7 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result, "scsi scan: INQUIRY %s with code 0x%x\n", result ? "failed" : "successful", result)); - if (result > 0) { - /* - * not-ready to ready transition [asc/ascq=0x28/0x0] - * or power-on, reset [asc/ascq=0x29/0x0], continue. - * INQUIRY should not yield UNIT_ATTENTION - * but many buggy devices do so anyway. - */ - if (scsi_status_is_check_condition(result) && - scsi_sense_valid(&sshdr)) { - if ((sshdr.sense_key == UNIT_ATTENTION) && - ((sshdr.asc == 0x28) || - (sshdr.asc == 0x29)) && - (sshdr.ascq == 0)) - continue; - } - } else if (result == 0) { + if (result == 0) { /* * if nothing was transferred, we try * again. It's a workaround for some USB @@ -859,6 +875,8 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result, static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, blist_flags_t *bflags, int async) { + const struct scsi_host_template *hostt = sdev->host->hostt; + struct queue_limits lim; int ret; /* @@ -990,19 +1008,6 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, sdev->select_no_atn = 1; /* - * Maximum 512 sector transfer length - * broken RA4x00 Compaq Disk Array - */ - if (*bflags & BLIST_MAX_512) - blk_queue_max_hw_sectors(sdev->request_queue, 512); - /* - * Max 1024 sector transfer length for targets that report incorrect - * max/optimal lengths and relied on the old block layer safe default - */ - else if (*bflags & BLIST_MAX_1024) - blk_queue_max_hw_sectors(sdev->request_queue, 1024); - - /* * Some devices may not want to have a start command automatically * issued when a device is added. */ @@ -1062,28 +1067,44 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, transport_configure_device(&sdev->sdev_gendev); - if (sdev->host->hostt->slave_configure) { - ret = sdev->host->hostt->slave_configure(sdev); - if (ret) { - /* - * if LLDD reports slave not present, don't clutter - * console with alloc failure messages - */ - if (ret != -ENXIO) { - sdev_printk(KERN_ERR, sdev, - "failed to configure device\n"); - } - return SCSI_SCAN_NO_RESPONSE; - } + /* + * No need to freeze the queue as it isn't reachable to anyone else yet. + */ + lim = queue_limits_start_update(sdev->request_queue); + if (*bflags & BLIST_MAX_512) + lim.max_hw_sectors = 512; + else if (*bflags & BLIST_MAX_1024) + lim.max_hw_sectors = 1024; + if (hostt->sdev_configure) + ret = hostt->sdev_configure(sdev, &lim); + if (ret) { + queue_limits_cancel_update(sdev->request_queue); /* - * The queue_depth is often changed in ->slave_configure. - * Set up budget map again since memory consumption of - * the map depends on actual queue depth. + * If the LLDD reports device not present, don't clutter the + * console with failure messages. */ - scsi_realloc_sdev_budget_map(sdev, sdev->queue_depth); + if (ret != -ENXIO) + sdev_printk(KERN_ERR, sdev, + "failed to configure device\n"); + return SCSI_SCAN_NO_RESPONSE; + } + + ret = queue_limits_commit_update(sdev->request_queue, &lim); + if (ret) { + sdev_printk(KERN_ERR, sdev, "failed to apply queue limits.\n"); + return SCSI_SCAN_NO_RESPONSE; } + /* + * The queue_depth is often changed in ->sdev_configure. + * + * Set up budget map again since memory consumption of the map depends + * on actual queue depth. + */ + if (hostt->sdev_configure) + scsi_realloc_sdev_budget_map(sdev, sdev->queue_depth); + if (sdev->scsi_level >= SCSI_3) scsi_attach_vpd(sdev); @@ -1402,14 +1423,34 @@ static int scsi_report_lun_scan(struct scsi_target *starget, blist_flags_t bflag unsigned int length; u64 lun; unsigned int num_luns; - unsigned int retries; int result; struct scsi_lun *lunp, *lun_data; - struct scsi_sense_hdr sshdr; struct scsi_device *sdev; struct Scsi_Host *shost = dev_to_shost(&starget->dev); + struct scsi_failure failure_defs[] = { + { + .sense = UNIT_ATTENTION, + .asc = SCMD_FAILURE_ASC_ANY, + .ascq = SCMD_FAILURE_ASCQ_ANY, + .result = SAM_STAT_CHECK_CONDITION, + }, + /* Fail all CCs except the UA above */ + { + .sense = SCMD_FAILURE_SENSE_ANY, + .result = SAM_STAT_CHECK_CONDITION, + }, + /* Retry any other errors not listed above */ + { + .result = SCMD_FAILURE_RESULT_ANY, + }, + {} + }; + struct scsi_failures failures = { + .total_allowed = 3, + .failure_definitions = failure_defs, + }; const struct scsi_exec_args exec_args = { - .sshdr = &sshdr, + .failures = &failures, }; int ret = 0; @@ -1480,29 +1521,18 @@ retry: * should come through as a check condition, and will not generate * a retry. */ - for (retries = 0; retries < 3; retries++) { - SCSI_LOG_SCAN_BUS(3, sdev_printk (KERN_INFO, sdev, - "scsi scan: Sending REPORT LUNS to (try %d)\n", - retries)); - - result = scsi_execute_cmd(sdev, scsi_cmd, REQ_OP_DRV_IN, - lun_data, length, - SCSI_REPORT_LUNS_TIMEOUT, 3, - &exec_args); + scsi_failures_reset_retries(&failures); - SCSI_LOG_SCAN_BUS(3, sdev_printk (KERN_INFO, sdev, - "scsi scan: REPORT LUNS" - " %s (try %d) result 0x%x\n", - result ? "failed" : "successful", - retries, result)); - if (result == 0) - break; - else if (scsi_sense_valid(&sshdr)) { - if (sshdr.sense_key != UNIT_ATTENTION) - break; - } - } + SCSI_LOG_SCAN_BUS(3, sdev_printk (KERN_INFO, sdev, + "scsi scan: Sending REPORT LUNS\n")); + + result = scsi_execute_cmd(sdev, scsi_cmd, REQ_OP_DRV_IN, lun_data, + length, SCSI_REPORT_LUNS_TIMEOUT, 3, + &exec_args); + SCSI_LOG_SCAN_BUS(3, sdev_printk (KERN_INFO, sdev, + "scsi scan: REPORT LUNS %s result 0x%x\n", + result ? "failed" : "successful", result)); if (result) { /* * The device probably does not support a REPORT LUN command @@ -1606,6 +1636,24 @@ struct scsi_device *__scsi_add_device(struct Scsi_Host *shost, uint channel, } EXPORT_SYMBOL(__scsi_add_device); +/** + * scsi_add_device - creates a new SCSI (LU) instance + * @host: the &Scsi_Host instance where the device is located + * @channel: target channel number (rarely other than %0) + * @target: target id number + * @lun: LUN of target device + * + * Probe for a specific LUN and add it if found. + * + * Notes: This call is usually performed internally during a SCSI + * bus scan when an HBA is added (i.e. scsi_scan_host()). So it + * should only be called if the HBA becomes aware of a new SCSI + * device (LU) after scsi_scan_host() has completed. If successful + * this call can lead to sdev_init() and sdev_configure() callbacks + * into the LLD. + * + * Return: %0 on success or negative error code on failure + */ int scsi_add_device(struct Scsi_Host *host, uint channel, uint target, u64 lun) { @@ -1619,6 +1667,40 @@ int scsi_add_device(struct Scsi_Host *host, uint channel, } EXPORT_SYMBOL(scsi_add_device); +int scsi_resume_device(struct scsi_device *sdev) +{ + struct device *dev = &sdev->sdev_gendev; + int ret = 0; + + device_lock(dev); + + /* + * Bail out if the device or its queue are not running. Otherwise, + * the rescan may block waiting for commands to be executed, with us + * holding the device lock. This can result in a potential deadlock + * in the power management core code when system resume is on-going. + */ + if (sdev->sdev_state != SDEV_RUNNING || + blk_queue_pm_only(sdev->request_queue)) { + ret = -EWOULDBLOCK; + goto unlock; + } + + if (dev->driver && try_module_get(dev->driver->owner)) { + struct scsi_driver *drv = to_scsi_driver(dev->driver); + + if (drv->resume) + ret = drv->resume(dev); + module_put(dev->driver->owner); + } + +unlock: + device_unlock(dev); + + return ret; +} +EXPORT_SYMBOL(scsi_resume_device); + int scsi_rescan_device(struct scsi_device *sdev) { struct device *dev = &sdev->sdev_gendev; @@ -1963,6 +2045,8 @@ static void do_scan_async(void *_data, async_cookie_t c) /** * scsi_scan_host - scan the given adapter * @shost: adapter to scan + * + * Notes: Should be called after scsi_add_host() **/ void scsi_scan_host(struct Scsi_Host *shost) { |