diff options
Diffstat (limited to 'drivers/soc/qcom/qcom-geni-se.c')
| -rw-r--r-- | drivers/soc/qcom/qcom-geni-se.c | 561 |
1 files changed, 515 insertions, 46 deletions
diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c index ba788762835f..cd1779b6a91a 100644 --- a/drivers/soc/qcom/qcom-geni-se.c +++ b/drivers/soc/qcom/qcom-geni-se.c @@ -1,11 +1,16 @@ // SPDX-License-Identifier: GPL-2.0 -// Copyright (c) 2017-2018, The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved. + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ /* Disable MMIO tracing to prevent excessive logging of unwanted MMIO traces */ #define __DISABLE_TRACE_MMIO__ #include <linux/acpi.h> +#include <linux/bitfield.h> #include <linux/clk.h> +#include <linux/firmware.h> #include <linux/slab.h> #include <linux/dma-mapping.h> #include <linux/io.h> @@ -89,7 +94,6 @@ * @base: Base address of this instance of QUP wrapper core * @clks: Handle to the primary & optional secondary AHB clocks * @num_clks: Count of clocks - * @to_core: Core ICC path */ struct geni_wrapper { struct device *dev; @@ -111,22 +115,94 @@ struct geni_se_desc { static const char * const icc_path_names[] = {"qup-core", "qup-config", "qup-memory"}; -#define QUP_HW_VER_REG 0x4 +static const char * const protocol_name[] = { "None", "SPI", "UART", "I2C", "I3C", "SPI SLAVE" }; + +/** + * struct se_fw_hdr - Serial Engine firmware configuration header + * + * This structure defines the SE firmware header, which together with the + * firmware payload is stored in individual ELF segments. + * + * @magic: Set to 'SEFW'. + * @version: Structure version number. + * @core_version: QUPV3 hardware version. + * @serial_protocol: Encoded in GENI_FW_REVISION. + * @fw_version: Firmware version, from GENI_FW_REVISION. + * @cfg_version: Configuration version, from GENI_INIT_CFG_REVISION. + * @fw_size_in_items: Number of 32-bit words in GENI_FW_RAM. + * @fw_offset: Byte offset to GENI_FW_RAM array. + * @cfg_size_in_items: Number of GENI_FW_CFG index/value pairs. + * @cfg_idx_offset: Byte offset to GENI_FW_CFG index array. + * @cfg_val_offset: Byte offset to GENI_FW_CFG values array. + */ +struct se_fw_hdr { + __le32 magic; + __le32 version; + __le32 core_version; + __le16 serial_protocol; + __le16 fw_version; + __le16 cfg_version; + __le16 fw_size_in_items; + __le16 fw_offset; + __le16 cfg_size_in_items; + __le16 cfg_idx_offset; + __le16 cfg_val_offset; +}; + +/*Magic numbers*/ +#define SE_MAGIC_NUM 0x57464553 + +#define MAX_GENI_CFG_RAMn_CNT 455 + +#define MI_PBT_NON_PAGED_SEGMENT 0x0 +#define MI_PBT_HASH_SEGMENT 0x2 +#define MI_PBT_NOTUSED_SEGMENT 0x3 +#define MI_PBT_SHARED_SEGMENT 0x4 + +#define MI_PBT_FLAG_PAGE_MODE BIT(20) +#define MI_PBT_FLAG_SEGMENT_TYPE GENMASK(26, 24) +#define MI_PBT_FLAG_ACCESS_TYPE GENMASK(23, 21) + +#define MI_PBT_PAGE_MODE_VALUE(x) FIELD_GET(MI_PBT_FLAG_PAGE_MODE, x) + +#define MI_PBT_SEGMENT_TYPE_VALUE(x) FIELD_GET(MI_PBT_FLAG_SEGMENT_TYPE, x) + +#define MI_PBT_ACCESS_TYPE_VALUE(x) FIELD_GET(MI_PBT_FLAG_ACCESS_TYPE, x) + +#define M_COMMON_GENI_M_IRQ_EN (GENMASK(6, 1) | \ + M_IO_DATA_DEASSERT_EN | \ + M_IO_DATA_ASSERT_EN | M_RX_FIFO_RD_ERR_EN | \ + M_RX_FIFO_WR_ERR_EN | M_TX_FIFO_RD_ERR_EN | \ + M_TX_FIFO_WR_ERR_EN) + +/* Common QUPV3 registers */ +#define QUPV3_HW_VER_REG 0x4 +#define QUPV3_SE_AHB_M_CFG 0x118 +#define QUPV3_COMMON_CFG 0x120 +#define QUPV3_COMMON_CGC_CTRL 0x21c + +/* QUPV3_COMMON_CFG fields */ +#define FAST_SWITCH_TO_HIGH_DISABLE BIT(0) + +/* QUPV3_SE_AHB_M_CFG fields */ +#define AHB_M_CLK_CGC_ON BIT(0) + +/* QUPV3_COMMON_CGC_CTRL fields */ +#define COMMON_CSR_SLV_CLK_CGC_ON BIT(0) /* Common SE registers */ -#define GENI_INIT_CFG_REVISION 0x0 -#define GENI_S_INIT_CFG_REVISION 0x4 -#define GENI_OUTPUT_CTRL 0x24 -#define GENI_CGC_CTRL 0x28 -#define GENI_CLK_CTRL_RO 0x60 -#define GENI_FW_S_REVISION_RO 0x6c +#define SE_GENI_INIT_CFG_REVISION 0x0 +#define SE_GENI_S_INIT_CFG_REVISION 0x4 +#define SE_GENI_CGC_CTRL 0x28 +#define SE_GENI_CLK_CTRL_RO 0x60 +#define SE_GENI_FW_S_REVISION_RO 0x6c +#define SE_GENI_CFG_REG0 0x100 #define SE_GENI_BYTE_GRAN 0x254 #define SE_GENI_TX_PACKING_CFG0 0x260 #define SE_GENI_TX_PACKING_CFG1 0x264 #define SE_GENI_RX_PACKING_CFG0 0x284 #define SE_GENI_RX_PACKING_CFG1 0x288 -#define SE_GENI_M_GP_LENGTH 0x910 -#define SE_GENI_S_GP_LENGTH 0x914 +#define SE_GENI_S_IRQ_ENABLE 0x644 #define SE_DMA_TX_PTR_L 0xc30 #define SE_DMA_TX_PTR_H 0xc34 #define SE_DMA_TX_ATTR 0xc38 @@ -143,12 +219,20 @@ static const char * const icc_path_names[] = {"qup-core", "qup-config", #define SE_DMA_RX_IRQ_EN 0xd48 #define SE_DMA_RX_IRQ_EN_SET 0xd4c #define SE_DMA_RX_IRQ_EN_CLR 0xd50 -#define SE_DMA_RX_LEN_IN 0xd54 #define SE_DMA_RX_MAX_BURST 0xd5c #define SE_DMA_RX_FLUSH 0xd60 #define SE_GSI_EVENT_EN 0xe18 #define SE_IRQ_EN 0xe1c #define SE_DMA_GENERAL_CFG 0xe30 +#define SE_GENI_FW_REVISION 0x1000 +#define SE_GENI_S_FW_REVISION 0x1004 +#define SE_GENI_CFG_RAMN 0x1010 +#define SE_GENI_CLK_CTRL 0x2000 +#define SE_DMA_IF_EN 0x2004 +#define SE_FIFO_IF_DISABLE 0x2008 + +/* GENI_FW_REVISION_RO fields */ +#define FW_REV_VERSION_MSK GENMASK(7, 0) /* GENI_OUTPUT_CTRL fields */ #define DEFAULT_IO_OUTPUT_CTRL_MSK GENMASK(6, 0) @@ -180,13 +264,22 @@ static const char * const icc_path_names[] = {"qup-core", "qup-config", /* SE_DMA_GENERAL_CFG */ #define DMA_RX_CLK_CGC_ON BIT(0) #define DMA_TX_CLK_CGC_ON BIT(1) -#define DMA_AHB_SLV_CFG_ON BIT(2) +#define DMA_AHB_SLV_CLK_CGC_ON BIT(2) #define AHB_SEC_SLV_CLK_CGC_ON BIT(3) #define DUMMY_RX_NON_BUFFERABLE BIT(4) #define RX_DMA_ZERO_PADDING_EN BIT(5) #define RX_DMA_IRQ_DELAY_MSK GENMASK(8, 6) #define RX_DMA_IRQ_DELAY_SHFT 6 +/* GENI_CLK_CTRL fields */ +#define SER_CLK_SEL BIT(0) + +/* GENI_DMA_IF_EN fields */ +#define DMA_IF_EN BIT(0) + +#define geni_setbits32(_addr, _v) writel(readl(_addr) | (_v), _addr) +#define geni_clrbits32(_addr, _v) writel(readl(_addr) & ~(_v), _addr) + /** * geni_se_get_qup_hw_version() - Read the QUP wrapper Hardware version * @se: Pointer to the corresponding serial engine. @@ -197,9 +290,9 @@ u32 geni_se_get_qup_hw_version(struct geni_se *se) { struct geni_wrapper *wrapper = se->wrapper; - return readl_relaxed(wrapper->base + QUP_HW_VER_REG); + return readl_relaxed(wrapper->base + QUPV3_HW_VER_REG); } -EXPORT_SYMBOL(geni_se_get_qup_hw_version); +EXPORT_SYMBOL_GPL(geni_se_get_qup_hw_version); static void geni_se_io_set_mode(void __iomem *base) { @@ -221,12 +314,12 @@ static void geni_se_io_init(void __iomem *base) { u32 val; - val = readl_relaxed(base + GENI_CGC_CTRL); + val = readl_relaxed(base + SE_GENI_CGC_CTRL); val |= DEFAULT_CGC_EN; - writel_relaxed(val, base + GENI_CGC_CTRL); + writel_relaxed(val, base + SE_GENI_CGC_CTRL); val = readl_relaxed(base + SE_DMA_GENERAL_CFG); - val |= AHB_SEC_SLV_CLK_CGC_ON | DMA_AHB_SLV_CFG_ON; + val |= AHB_SEC_SLV_CLK_CGC_ON | DMA_AHB_SLV_CLK_CGC_ON; val |= DMA_TX_CLK_CGC_ON | DMA_RX_CLK_CGC_ON; writel_relaxed(val, base + SE_DMA_GENERAL_CFG); @@ -272,7 +365,7 @@ void geni_se_init(struct geni_se *se, u32 rx_wm, u32 rx_rfr) val |= S_COMMON_GENI_S_IRQ_EN; writel_relaxed(val, se->base + SE_GENI_S_IRQ_EN); } -EXPORT_SYMBOL(geni_se_init); +EXPORT_SYMBOL_GPL(geni_se_init); static void geni_se_select_fifo_mode(struct geni_se *se) { @@ -364,7 +457,7 @@ void geni_se_select_mode(struct geni_se *se, enum geni_se_xfer_mode mode) break; } } -EXPORT_SYMBOL(geni_se_select_mode); +EXPORT_SYMBOL_GPL(geni_se_select_mode); /** * DOC: Overview @@ -481,7 +574,7 @@ void geni_se_config_packing(struct geni_se *se, int bpw, int pack_words, if (pack_words || bpw == 32) writel_relaxed(bpw / 16, se->base + SE_GENI_BYTE_GRAN); } -EXPORT_SYMBOL(geni_se_config_packing); +EXPORT_SYMBOL_GPL(geni_se_config_packing); static void geni_se_clks_off(struct geni_se *se) { @@ -512,7 +605,7 @@ int geni_se_resources_off(struct geni_se *se) geni_se_clks_off(se); return 0; } -EXPORT_SYMBOL(geni_se_resources_off); +EXPORT_SYMBOL_GPL(geni_se_resources_off); static int geni_se_clks_on(struct geni_se *se) { @@ -553,7 +646,7 @@ int geni_se_resources_on(struct geni_se *se) return ret; } -EXPORT_SYMBOL(geni_se_resources_on); +EXPORT_SYMBOL_GPL(geni_se_resources_on); /** * geni_se_clk_tbl_get() - Get the clock table to program DFS @@ -586,7 +679,8 @@ int geni_se_clk_tbl_get(struct geni_se *se, unsigned long **tbl) for (i = 0; i < MAX_CLK_PERF_LEVEL; i++) { freq = clk_round_rate(se->clk, freq + 1); - if (freq <= 0 || freq == se->clk_perf_tbl[i - 1]) + if (freq <= 0 || + (i > 0 && freq == se->clk_perf_tbl[i - 1])) break; se->clk_perf_tbl[i] = freq; } @@ -594,7 +688,7 @@ int geni_se_clk_tbl_get(struct geni_se *se, unsigned long **tbl) *tbl = se->clk_perf_tbl; return se->num_clk_levels; } -EXPORT_SYMBOL(geni_se_clk_tbl_get); +EXPORT_SYMBOL_GPL(geni_se_clk_tbl_get); /** * geni_se_clk_freq_match() - Get the matching or closest SE clock frequency @@ -656,11 +750,14 @@ int geni_se_clk_freq_match(struct geni_se *se, unsigned long req_freq, return 0; } -EXPORT_SYMBOL(geni_se_clk_freq_match); +EXPORT_SYMBOL_GPL(geni_se_clk_freq_match); + +#define GENI_SE_DMA_DONE_EN BIT(0) +#define GENI_SE_DMA_EOT_EN BIT(1) +#define GENI_SE_DMA_AHB_ERR_EN BIT(2) +#define GENI_SE_DMA_RESET_DONE_EN BIT(3) +#define GENI_SE_DMA_FLUSH_DONE BIT(4) -#define GENI_SE_DMA_DONE_EN BIT(0) -#define GENI_SE_DMA_EOT_EN BIT(1) -#define GENI_SE_DMA_AHB_ERR_EN BIT(2) #define GENI_SE_DMA_EOT_BUF BIT(0) /** @@ -684,7 +781,7 @@ void geni_se_tx_init_dma(struct geni_se *se, dma_addr_t iova, size_t len) writel_relaxed(GENI_SE_DMA_EOT_BUF, se->base + SE_DMA_TX_ATTR); writel(len, se->base + SE_DMA_TX_LEN); } -EXPORT_SYMBOL(geni_se_tx_init_dma); +EXPORT_SYMBOL_GPL(geni_se_tx_init_dma); /** * geni_se_tx_dma_prep() - Prepare the serial engine for TX DMA transfer @@ -712,7 +809,7 @@ int geni_se_tx_dma_prep(struct geni_se *se, void *buf, size_t len, geni_se_tx_init_dma(se, *iova, len); return 0; } -EXPORT_SYMBOL(geni_se_tx_dma_prep); +EXPORT_SYMBOL_GPL(geni_se_tx_dma_prep); /** * geni_se_rx_init_dma() - Initiate RX DMA transfer on the serial engine @@ -736,7 +833,7 @@ void geni_se_rx_init_dma(struct geni_se *se, dma_addr_t iova, size_t len) writel_relaxed(0, se->base + SE_DMA_RX_ATTR); writel(len, se->base + SE_DMA_RX_LEN); } -EXPORT_SYMBOL(geni_se_rx_init_dma); +EXPORT_SYMBOL_GPL(geni_se_rx_init_dma); /** * geni_se_rx_dma_prep() - Prepare the serial engine for RX DMA transfer @@ -764,7 +861,7 @@ int geni_se_rx_dma_prep(struct geni_se *se, void *buf, size_t len, geni_se_rx_init_dma(se, *iova, len); return 0; } -EXPORT_SYMBOL(geni_se_rx_dma_prep); +EXPORT_SYMBOL_GPL(geni_se_rx_dma_prep); /** * geni_se_tx_dma_unprep() - Unprepare the serial engine after TX DMA transfer @@ -781,7 +878,7 @@ void geni_se_tx_dma_unprep(struct geni_se *se, dma_addr_t iova, size_t len) if (!dma_mapping_error(wrapper->dev, iova)) dma_unmap_single(wrapper->dev, iova, len, DMA_TO_DEVICE); } -EXPORT_SYMBOL(geni_se_tx_dma_unprep); +EXPORT_SYMBOL_GPL(geni_se_tx_dma_unprep); /** * geni_se_rx_dma_unprep() - Unprepare the serial engine after RX DMA transfer @@ -798,7 +895,7 @@ void geni_se_rx_dma_unprep(struct geni_se *se, dma_addr_t iova, size_t len) if (!dma_mapping_error(wrapper->dev, iova)) dma_unmap_single(wrapper->dev, iova, len, DMA_FROM_DEVICE); } -EXPORT_SYMBOL(geni_se_rx_dma_unprep); +EXPORT_SYMBOL_GPL(geni_se_rx_dma_unprep); int geni_icc_get(struct geni_se *se, const char *icc_ddr) { @@ -827,7 +924,7 @@ err: return err; } -EXPORT_SYMBOL(geni_icc_get); +EXPORT_SYMBOL_GPL(geni_icc_get); int geni_icc_set_bw(struct geni_se *se) { @@ -845,7 +942,7 @@ int geni_icc_set_bw(struct geni_se *se) return 0; } -EXPORT_SYMBOL(geni_icc_set_bw); +EXPORT_SYMBOL_GPL(geni_icc_set_bw); void geni_icc_set_tag(struct geni_se *se, u32 tag) { @@ -854,7 +951,7 @@ void geni_icc_set_tag(struct geni_se *se, u32 tag) for (i = 0; i < ARRAY_SIZE(se->icc_paths); i++) icc_set_tag(se->icc_paths[i].path, tag); } -EXPORT_SYMBOL(geni_icc_set_tag); +EXPORT_SYMBOL_GPL(geni_icc_set_tag); /* To do: Replace this by icc_bulk_enable once it's implemented in ICC core */ int geni_icc_enable(struct geni_se *se) @@ -872,7 +969,7 @@ int geni_icc_enable(struct geni_se *se) return 0; } -EXPORT_SYMBOL(geni_icc_enable); +EXPORT_SYMBOL_GPL(geni_icc_enable); int geni_icc_disable(struct geni_se *se) { @@ -889,12 +986,384 @@ int geni_icc_disable(struct geni_se *se) return 0; } -EXPORT_SYMBOL(geni_icc_disable); +EXPORT_SYMBOL_GPL(geni_icc_disable); + +/** + * geni_find_protocol_fw() - Locate and validate SE firmware for a protocol. + * @dev: Pointer to the device structure. + * @fw: Pointer to the firmware image. + * @protocol: Expected serial engine protocol type. + * + * Identifies the appropriate firmware image or configuration required for a + * specific communication protocol instance running on a Qualcomm GENI + * controller. + * + * Return: pointer to a valid 'struct se_fw_hdr' if found, or NULL otherwise. + */ +static struct se_fw_hdr *geni_find_protocol_fw(struct device *dev, const struct firmware *fw, + enum geni_se_protocol_type protocol) +{ + const struct elf32_hdr *ehdr; + const struct elf32_phdr *phdrs; + const struct elf32_phdr *phdr; + struct se_fw_hdr *sefw; + u32 fw_end, cfg_idx_end, cfg_val_end; + u16 fw_size; + int i; + + if (!fw || fw->size < sizeof(struct elf32_hdr)) + return NULL; + + ehdr = (const struct elf32_hdr *)fw->data; + phdrs = (const struct elf32_phdr *)(fw->data + ehdr->e_phoff); + + /* + * The firmware is expected to have at least two program headers (segments). + * One for metadata and the other for the actual protocol-specific firmware. + */ + if (ehdr->e_phnum < 2) { + dev_err(dev, "Invalid firmware: less than 2 program headers\n"); + return NULL; + } + + for (i = 0; i < ehdr->e_phnum; i++) { + phdr = &phdrs[i]; + + if (fw->size < phdr->p_offset + phdr->p_filesz) { + dev_err(dev, "Firmware size (%zu) < expected offset (%u) + size (%u)\n", + fw->size, phdr->p_offset, phdr->p_filesz); + return NULL; + } + + if (phdr->p_type != PT_LOAD || !phdr->p_memsz) + continue; + + if (MI_PBT_PAGE_MODE_VALUE(phdr->p_flags) != MI_PBT_NON_PAGED_SEGMENT || + MI_PBT_SEGMENT_TYPE_VALUE(phdr->p_flags) == MI_PBT_HASH_SEGMENT || + MI_PBT_ACCESS_TYPE_VALUE(phdr->p_flags) == MI_PBT_NOTUSED_SEGMENT || + MI_PBT_ACCESS_TYPE_VALUE(phdr->p_flags) == MI_PBT_SHARED_SEGMENT) + continue; + + if (phdr->p_filesz < sizeof(struct se_fw_hdr)) + continue; + + sefw = (struct se_fw_hdr *)(fw->data + phdr->p_offset); + fw_size = le16_to_cpu(sefw->fw_size_in_items); + fw_end = le16_to_cpu(sefw->fw_offset) + fw_size * sizeof(u32); + cfg_idx_end = le16_to_cpu(sefw->cfg_idx_offset) + + le16_to_cpu(sefw->cfg_size_in_items) * sizeof(u8); + cfg_val_end = le16_to_cpu(sefw->cfg_val_offset) + + le16_to_cpu(sefw->cfg_size_in_items) * sizeof(u32); + + if (le32_to_cpu(sefw->magic) != SE_MAGIC_NUM || le32_to_cpu(sefw->version) != 1) + continue; + + if (le32_to_cpu(sefw->serial_protocol) != protocol) + continue; + + if (fw_size % 2 != 0) { + fw_size++; + sefw->fw_size_in_items = cpu_to_le16(fw_size); + } + + if (fw_size >= MAX_GENI_CFG_RAMn_CNT) { + dev_err(dev, + "Firmware size (%u) exceeds max allowed RAMn count (%u)\n", + fw_size, MAX_GENI_CFG_RAMn_CNT); + continue; + } + + if (fw_end > phdr->p_filesz || cfg_idx_end > phdr->p_filesz || + cfg_val_end > phdr->p_filesz) { + dev_err(dev, "Truncated or corrupt SE FW segment found at index %d\n", i); + continue; + } + + return sefw; + } + + dev_err(dev, "Failed to get %s protocol firmware\n", protocol_name[protocol]); + return NULL; +} + +/** + * geni_configure_xfer_mode() - Set the transfer mode. + * @se: Pointer to the concerned serial engine. + * @mode: SE data transfer mode. + * + * Set the transfer mode to either FIFO or DMA according to the mode specified + * by the protocol driver. + * + * Return: 0 if successful, otherwise return an error value. + */ +static int geni_configure_xfer_mode(struct geni_se *se, enum geni_se_xfer_mode mode) +{ + /* Configure SE FIFO, DMA or GSI mode. */ + switch (mode) { + case GENI_GPI_DMA: + geni_setbits32(se->base + SE_GENI_DMA_MODE_EN, GENI_DMA_MODE_EN); + writel(0x0, se->base + SE_IRQ_EN); + writel(DMA_RX_EVENT_EN | DMA_TX_EVENT_EN | GENI_M_EVENT_EN | GENI_S_EVENT_EN, + se->base + SE_GSI_EVENT_EN); + break; + + case GENI_SE_FIFO: + geni_clrbits32(se->base + SE_GENI_DMA_MODE_EN, GENI_DMA_MODE_EN); + writel(DMA_RX_IRQ_EN | DMA_TX_IRQ_EN | GENI_M_IRQ_EN | GENI_S_IRQ_EN, + se->base + SE_IRQ_EN); + writel(0x0, se->base + SE_GSI_EVENT_EN); + break; + + case GENI_SE_DMA: + geni_setbits32(se->base + SE_GENI_DMA_MODE_EN, GENI_DMA_MODE_EN); + writel(DMA_RX_IRQ_EN | DMA_TX_IRQ_EN | GENI_M_IRQ_EN | GENI_S_IRQ_EN, + se->base + SE_IRQ_EN); + writel(0x0, se->base + SE_GSI_EVENT_EN); + break; + + default: + dev_err(se->dev, "Invalid geni-se transfer mode: %d\n", mode); + return -EINVAL; + } + return 0; +} + +/** + * geni_enable_interrupts() - Enable interrupts. + * @se: Pointer to the concerned serial engine. + * + * Enable the required interrupts during the firmware load process. + */ +static void geni_enable_interrupts(struct geni_se *se) +{ + u32 val; + + /* Enable required interrupts. */ + writel(M_COMMON_GENI_M_IRQ_EN, se->base + SE_GENI_M_IRQ_EN); + + val = S_CMD_OVERRUN_EN | S_ILLEGAL_CMD_EN | S_CMD_CANCEL_EN | S_CMD_ABORT_EN | + S_GP_IRQ_0_EN | S_GP_IRQ_1_EN | S_GP_IRQ_2_EN | S_GP_IRQ_3_EN | + S_RX_FIFO_WR_ERR_EN | S_RX_FIFO_RD_ERR_EN; + writel(val, se->base + SE_GENI_S_IRQ_ENABLE); + + /* DMA mode configuration. */ + val = GENI_SE_DMA_RESET_DONE_EN | GENI_SE_DMA_AHB_ERR_EN | GENI_SE_DMA_DONE_EN; + writel(val, se->base + SE_DMA_TX_IRQ_EN_SET); + val = GENI_SE_DMA_FLUSH_DONE | GENI_SE_DMA_RESET_DONE_EN | GENI_SE_DMA_AHB_ERR_EN | + GENI_SE_DMA_DONE_EN; + writel(val, se->base + SE_DMA_RX_IRQ_EN_SET); +} + +/** + * geni_write_fw_revision() - Write the firmware revision. + * @se: Pointer to the concerned serial engine. + * @serial_protocol: serial protocol type. + * @fw_version: QUP firmware version. + * + * Write the firmware revision and protocol into the respective register. + */ +static void geni_write_fw_revision(struct geni_se *se, u16 serial_protocol, u16 fw_version) +{ + u32 reg; + + reg = FIELD_PREP(FW_REV_PROTOCOL_MSK, serial_protocol); + reg |= FIELD_PREP(FW_REV_VERSION_MSK, fw_version); + + writel(reg, se->base + SE_GENI_FW_REVISION); + writel(reg, se->base + SE_GENI_S_FW_REVISION); +} + +/** + * geni_load_se_fw() - Load Serial Engine specific firmware. + * @se: Pointer to the concerned serial engine. + * @fw: Pointer to the firmware structure. + * @mode: SE data transfer mode. + * @protocol: Protocol type to be used with the SE (e.g., UART, SPI, I2C). + * + * Load the protocol firmware into the IRAM of the Serial Engine. + * + * Return: 0 if successful, otherwise return an error value. + */ +static int geni_load_se_fw(struct geni_se *se, const struct firmware *fw, + enum geni_se_xfer_mode mode, enum geni_se_protocol_type protocol) +{ + const u32 *fw_data, *cfg_val_arr; + const u8 *cfg_idx_arr; + u32 i, reg_value; + int ret; + struct se_fw_hdr *hdr; + + hdr = geni_find_protocol_fw(se->dev, fw, protocol); + if (!hdr) + return -EINVAL; + + fw_data = (const u32 *)((u8 *)hdr + le16_to_cpu(hdr->fw_offset)); + cfg_idx_arr = (const u8 *)hdr + le16_to_cpu(hdr->cfg_idx_offset); + cfg_val_arr = (const u32 *)((u8 *)hdr + le16_to_cpu(hdr->cfg_val_offset)); + + ret = geni_icc_set_bw(se); + if (ret) + return ret; + + ret = geni_icc_enable(se); + if (ret) + return ret; + + ret = geni_se_resources_on(se); + if (ret) + goto out_icc_disable; + + /* + * Disable high-priority interrupts until all currently executing + * low-priority interrupts have been fully handled. + */ + geni_setbits32(se->wrapper->base + QUPV3_COMMON_CFG, FAST_SWITCH_TO_HIGH_DISABLE); + + /* Set AHB_M_CLK_CGC_ON to indicate hardware controls se-wrapper cgc clock. */ + geni_setbits32(se->wrapper->base + QUPV3_SE_AHB_M_CFG, AHB_M_CLK_CGC_ON); + + /* Let hardware to control common cgc. */ + geni_setbits32(se->wrapper->base + QUPV3_COMMON_CGC_CTRL, COMMON_CSR_SLV_CLK_CGC_ON); + + /* + * Setting individual bits in GENI_OUTPUT_CTRL activates corresponding output lines, + * allowing the hardware to drive data as configured. + */ + writel(0x0, se->base + GENI_OUTPUT_CTRL); + + /* Set SCLK and HCLK to program RAM */ + geni_setbits32(se->base + SE_GENI_CGC_CTRL, PROG_RAM_SCLK_OFF | PROG_RAM_HCLK_OFF); + writel(0x0, se->base + SE_GENI_CLK_CTRL); + geni_clrbits32(se->base + SE_GENI_CGC_CTRL, PROG_RAM_SCLK_OFF | PROG_RAM_HCLK_OFF); + + /* Enable required clocks for DMA CSR, TX and RX. */ + reg_value = AHB_SEC_SLV_CLK_CGC_ON | DMA_AHB_SLV_CLK_CGC_ON | + DMA_TX_CLK_CGC_ON | DMA_RX_CLK_CGC_ON; + geni_setbits32(se->base + SE_DMA_GENERAL_CFG, reg_value); + + /* Let hardware control CGC by default. */ + writel(DEFAULT_CGC_EN, se->base + SE_GENI_CGC_CTRL); + + /* Set version of the configuration register part of firmware. */ + writel(le16_to_cpu(hdr->cfg_version), se->base + SE_GENI_INIT_CFG_REVISION); + writel(le16_to_cpu(hdr->cfg_version), se->base + SE_GENI_S_INIT_CFG_REVISION); + + /* Configure GENI primitive table. */ + for (i = 0; i < le16_to_cpu(hdr->cfg_size_in_items); i++) + writel(cfg_val_arr[i], + se->base + SE_GENI_CFG_REG0 + (cfg_idx_arr[i] * sizeof(u32))); + + /* Configure condition for assertion of RX_RFR_WATERMARK condition. */ + reg_value = geni_se_get_rx_fifo_depth(se); + writel(reg_value - 2, se->base + SE_GENI_RX_RFR_WATERMARK_REG); + + /* Let hardware control CGC */ + geni_setbits32(se->base + GENI_OUTPUT_CTRL, DEFAULT_IO_OUTPUT_CTRL_MSK); + + ret = geni_configure_xfer_mode(se, mode); + if (ret) + goto out_resources_off; + + geni_enable_interrupts(se); + + geni_write_fw_revision(se, le16_to_cpu(hdr->serial_protocol), le16_to_cpu(hdr->fw_version)); + + /* Program RAM address space. */ + memcpy_toio(se->base + SE_GENI_CFG_RAMN, fw_data, + le16_to_cpu(hdr->fw_size_in_items) * sizeof(u32)); + + /* Put default values on GENI's output pads. */ + writel_relaxed(0x1, se->base + GENI_FORCE_DEFAULT_REG); + + /* Toggle SCLK/HCLK from high to low to finalize RAM programming and apply config. */ + geni_setbits32(se->base + SE_GENI_CGC_CTRL, PROG_RAM_SCLK_OFF | PROG_RAM_HCLK_OFF); + geni_setbits32(se->base + SE_GENI_CLK_CTRL, SER_CLK_SEL); + geni_clrbits32(se->base + SE_GENI_CGC_CTRL, PROG_RAM_SCLK_OFF | PROG_RAM_HCLK_OFF); + + /* Serial engine DMA interface is enabled. */ + geni_setbits32(se->base + SE_DMA_IF_EN, DMA_IF_EN); + + /* Enable or disable FIFO interface of the serial engine. */ + if (mode == GENI_SE_FIFO) + geni_clrbits32(se->base + SE_FIFO_IF_DISABLE, FIFO_IF_DISABLE); + else + geni_setbits32(se->base + SE_FIFO_IF_DISABLE, FIFO_IF_DISABLE); + +out_resources_off: + geni_se_resources_off(se); + +out_icc_disable: + geni_icc_disable(se); + return ret; +} + +/** + * geni_load_se_firmware() - Load firmware for SE based on protocol + * @se: Pointer to the concerned serial engine. + * @protocol: Protocol type to be used with the SE (e.g., UART, SPI, I2C). + * + * Retrieves the firmware name from device properties and sets the transfer mode + * (FIFO or GSI DMA) based on device tree configuration. Enforces FIFO mode for + * UART protocol due to lack of GSI DMA support. Requests the firmware and loads + * it into the SE. + * + * Return: 0 on success, negative error code on failure. + */ +int geni_load_se_firmware(struct geni_se *se, enum geni_se_protocol_type protocol) +{ + const char *fw_name; + const struct firmware *fw; + enum geni_se_xfer_mode mode = GENI_SE_FIFO; + int ret; + + if (protocol >= ARRAY_SIZE(protocol_name)) { + dev_err(se->dev, "Invalid geni-se protocol: %d", protocol); + return -EINVAL; + } + + ret = device_property_read_string(se->wrapper->dev, "firmware-name", &fw_name); + if (ret) { + dev_err(se->dev, "Failed to read firmware-name property: %d\n", ret); + return -EINVAL; + } + + if (of_property_read_bool(se->dev->of_node, "qcom,enable-gsi-dma")) + mode = GENI_GPI_DMA; + + /* GSI mode is not supported by the UART driver; therefore, setting FIFO mode */ + if (protocol == GENI_SE_UART) + mode = GENI_SE_FIFO; + + ret = request_firmware(&fw, fw_name, se->dev); + if (ret) { + if (ret == -ENOENT) + return -EPROBE_DEFER; + + dev_err(se->dev, "Failed to request firmware '%s' for protocol %d: ret: %d\n", + fw_name, protocol, ret); + return ret; + } + + ret = geni_load_se_fw(se, fw, mode, protocol); + release_firmware(fw); + + if (ret) { + dev_err(se->dev, "Failed to load SE firmware for protocol %d: ret: %d\n", + protocol, ret); + return ret; + } + + dev_dbg(se->dev, "Firmware load for %s protocol is successful for xfer mode: %d\n", + protocol_name[protocol], mode); + return 0; +} +EXPORT_SYMBOL_GPL(geni_load_se_firmware); static int geni_se_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct geni_wrapper *wrapper; + const struct geni_se_desc *desc; int ret; wrapper = devm_kzalloc(dev, sizeof(*wrapper), GFP_KERNEL); @@ -906,13 +1375,10 @@ static int geni_se_probe(struct platform_device *pdev) if (IS_ERR(wrapper->base)) return PTR_ERR(wrapper->base); - if (!has_acpi_companion(&pdev->dev)) { - const struct geni_se_desc *desc; - int i; + desc = device_get_match_data(&pdev->dev); - desc = device_get_match_data(&pdev->dev); - if (!desc) - return -EINVAL; + if (!has_acpi_companion(&pdev->dev) && desc->num_clks) { + int i; wrapper->num_clks = min_t(unsigned int, desc->num_clks, MAX_CLKS); @@ -953,6 +1419,8 @@ static const struct geni_se_desc qup_desc = { .num_clks = ARRAY_SIZE(qup_clks), }; +static const struct geni_se_desc sa8255p_qup_desc = {}; + static const char * const i2c_master_hub_clks[] = { "s-ahb", }; @@ -965,6 +1433,7 @@ static const struct geni_se_desc i2c_master_hub_desc = { static const struct of_device_id geni_se_dt_match[] = { { .compatible = "qcom,geni-se-qup", .data = &qup_desc }, { .compatible = "qcom,geni-se-i2c-master-hub", .data = &i2c_master_hub_desc }, + { .compatible = "qcom,sa8255p-geni-se-qup", .data = &sa8255p_qup_desc }, {} }; MODULE_DEVICE_TABLE(of, geni_se_dt_match); |