diff options
Diffstat (limited to 'drivers/spi/Kconfig')
| -rw-r--r-- | drivers/spi/Kconfig | 177 |
1 files changed, 159 insertions, 18 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index a2c99ff33e0a..5520403896fc 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -55,6 +55,9 @@ config SPI_MEM This extension is meant to simplify interaction with SPI memories by providing a high-level interface to send memory-like commands. +config SPI_OFFLOAD + bool + comment "SPI Master Controller Drivers" config SPI_AIROHA_SNFI @@ -96,6 +99,36 @@ config SPI_AMLOGIC_SPIFC_A1 This enables master mode support for the SPIFC (SPI flash controller) available in Amlogic A1 (A113L SoC). +config SPI_AMLOGIC_SPIFC_A4 + tristate "Amlogic A4 SPI Flash controller" + depends on ARCH_MESON || COMPILE_TEST + select REGMAP_MMIO + help + This enables SPI mode on the NAND Flash Controller of Amlogic + ARM SoCs. It supports SPI Nor Flash and SPI NAND Flash (Could + enable Host ECC HW engine). The controller implements the + SPI-MEM interface, it doesn't support generic SPI. + +config SPI_AMLOGIC_SPISG + tristate "Amlogic SPISG controller" + depends on COMMON_CLK + depends on ARCH_MESON || COMPILE_TEST + help + This enables master mode support for the SPISG (SPI scatter-gather + communication controller), which is available on platforms such as + Amlogic A4 SoCs. + +config SPI_APPLE + tristate "Apple SoC SPI Controller platform driver" + depends on ARCH_APPLE || COMPILE_TEST + help + This enables support for the SPI controller present on + many Apple SoCs, including the t8103 (M1), t8112 (M2) + and t600x (M1 Pro/Max/Ultra). Multiple SPI controller + instances are present on the SoC and each connects usually + to a single device like spi-nor (nvram), input device controller + or fingerprint sensor. + config SPI_AR934X tristate "Qualcomm Atheros AR934X/QCA95XX SPI controller driver" depends on ATH79 || COMPILE_TEST @@ -131,7 +164,7 @@ config SPI_ASPEED_SMC config SPI_ATMEL tristate "Atmel SPI Controller" - depends on ARCH_AT91 || COMPILE_TEST + depends on ARCH_MICROCHIP || COMPILE_TEST depends on OF help This selects a driver for the Atmel SPI Controller, present on @@ -165,6 +198,7 @@ config SPI_AU1550 config SPI_AXI_SPI_ENGINE tristate "Analog Devices AXI SPI Engine controller" depends on HAS_IOMEM + select SPI_OFFLOAD help This enables support for the Analog Devices AXI SPI Engine SPI controller. It is part of the SPI Engine framework that is used in some Analog Devices @@ -267,7 +301,7 @@ config SPI_CADENCE_QUADSPI config SPI_CADENCE_XSPI tristate "Cadence XSPI controller" - depends on OF && HAS_IOMEM + depends on OF && HAS_IOMEM && 64BIT depends on SPI_MEM help Enable support for the Cadence XSPI Flash controller. @@ -277,6 +311,12 @@ config SPI_CADENCE_XSPI device with a Cadence XSPI controller and want to access the Flash as an MTD device. +config SPI_CH341 + tristate "CH341 USB2SPI adapter" + depends on SPI_MASTER && USB + help + Enables the SPI controller on the CH341a USB to serial chip + config SPI_CLPS711X tristate "CLPS711X host SPI controller" depends on ARCH_CLPS711X || COMPILE_TEST @@ -395,7 +435,8 @@ config SPI_FSL_LPSPI config SPI_FSL_QUADSPI tristate "Freescale QSPI controller" - depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST + depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || \ + ARCH_SPACEMIT || COMPILE_TEST depends on HAS_IOMEM help This enables support for the Quad SPI controller in master mode. @@ -525,6 +566,18 @@ config SPI_JCORE This enables support for the SPI master controller in the J-Core synthesizable, open source SoC. +config SPI_KSPI2 + tristate "Support for KEBA SPI master type 2 hardware" + depends on HAS_IOMEM + depends on KEBA_CP500 || COMPILE_TEST + select AUXILIARY_BUS + help + This driver supports KEBA SPI master type 2 FPGA implementation, + as found on CP500 devices for example. + + This driver can also be built as a module. If so, the module + will be called spi-kspi2. + config SPI_LM70_LLP tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)" depends on PARPORT @@ -614,10 +667,10 @@ config SPI_FSL_SPI config SPI_FSL_DSPI tristate "Freescale DSPI controller" select REGMAP_MMIO - depends on SOC_VF610 || SOC_LS1021A || ARCH_LAYERSCAPE || M5441x || COMPILE_TEST + depends on ARCH_MXC || ARCH_NXP || M5441x || COMPILE_TEST help This enables support for the Freescale DSPI controller in master - mode. VF610, LS1021A and ColdFire platforms uses the controller. + mode. S32, VF610, LS1021A and ColdFire platforms uses the controller. config SPI_FSL_ESPI tristate "Freescale eSPI controller" @@ -654,15 +707,6 @@ config SPI_MESON_SPIFC This enables master mode support for the SPIFC (SPI flash controller) available in Amlogic Meson SoCs. -config SPI_MICROCHIP_CORE - tristate "Microchip FPGA SPI controllers" - depends on SPI_MASTER - help - This enables the SPI driver for Microchip FPGA SPI controllers. - Say Y or M here if you want to use the "hard" controllers on - PolarFire SoC. - If built as a module, it will be called spi-microchip-core. - config SPI_MICROCHIP_CORE_QSPI tristate "Microchip FPGA QSPI controllers" depends on SPI_MASTER @@ -672,6 +716,15 @@ config SPI_MICROCHIP_CORE_QSPI PolarFire SoC. If built as a module, it will be called spi-microchip-core-qspi. +config SPI_MICROCHIP_CORE_SPI + tristate "Microchip FPGA CoreSPI controller" + depends on SPI_MASTER + help + This enables the SPI driver for Microchip FPGA CoreSPI controller. + Say Y or M here if you want to use the "soft" controllers on + PolarFire SoC. + If built as a module, it will be called spi-microchip-core-spi. + config SPI_MT65XX tristate "MediaTek SPI controller" depends on ARCH_MEDIATEK || COMPILE_TEST @@ -819,6 +872,16 @@ config SPI_PL022 controller. If you have an embedded system with an AMBA(R) bus and a PL022 controller, say Y or M here. +config SPI_POLARFIRE_SOC + tristate "Microchip FPGA SPI controllers" + depends on SPI_MASTER + depends on ARCH_MICROCHIP || COMPILE_TEST + help + This enables the SPI driver for Microchip FPGA SPI controllers. + Say Y or M here if you want to use the "hard" controllers on + PolarFire SoC. + If built as a module, it will be called spi-mpfs. + config SPI_PPC4xx tristate "PPC4xx SPI Controller" depends on PPC32 && 4xx @@ -837,6 +900,17 @@ config SPI_PXA2XX config SPI_PXA2XX_PCI def_tristate SPI_PXA2XX && PCI && COMMON_CLK +config SPI_REALTEK_SNAND + tristate "Realtek SPI-NAND Flash Controller" + depends on MACH_REALTEK_RTL || COMPILE_TEST + select REGMAP + help + This enables support for the SPI-NAND Flash controller on + Realtek SoCs. + + This driver does not support generic SPI. The implementation + only supports the spi-mem interface. + config SPI_ROCKCHIP tristate "Rockchip SPI controller driver" depends on ARCH_ROCKCHIP || COMPILE_TEST @@ -863,7 +937,8 @@ config SPI_ROCKCHIP_SFC config SPI_RB4XX tristate "Mikrotik RB4XX SPI master" - depends on SPI_MASTER && ATH79 + depends on SPI_MASTER && (ATH79 || COMPILE_TEST) + depends on OF help SPI controller driver for the Mikrotik RB4xx series boards. @@ -879,6 +954,14 @@ config SPI_RSPI help SPI driver for Renesas RSPI and QSPI blocks. +config SPI_RZV2H_RSPI + tristate "Renesas RZ/V2H RSPI controller" + depends on ARCH_RENESAS || COMPILE_TEST + help + RSPI driver for the Renesas RZ/V2H Serial Peripheral Interface (RSPI). + RSPI supports both SPI host and SPI target roles. This option only + enables the SPI host role. + config SPI_RZV2M_CSI tristate "Renesas RZ/V2M CSI controller" depends on ARCH_RENESAS || COMPILE_TEST @@ -892,6 +975,15 @@ config SPI_QCOM_QSPI help QSPI(Quad SPI) driver for Qualcomm QSPI controller. +config SPI_QPIC_SNAND + tristate "QPIC SNAND controller" + depends on ARCH_QCOM || COMPILE_TEST + depends on MTD + help + QPIC_SNAND (QPIC SPI NAND) driver for Qualcomm QPIC controller. + QPIC controller supports both parallel nand and serial nand. + This config will enable serial nand driver for QPIC controller. + config SPI_QUP tristate "Qualcomm SPI controller with QUP interface" depends on ARCH_QCOM || COMPILE_TEST @@ -981,6 +1073,15 @@ config SPI_SN_F_OSPI for connecting an SPI Flash memory over up to 8-bit wide bus. It supports indirect access mode only. +config SPI_SG2044_NOR + tristate "SG2044 SPI NOR Controller" + depends on ARCH_SOPHGO || COMPILE_TEST + help + This enables support for the SG2044 SPI NOR controller, + which supports Dual/Quad read and write operations while + also supporting 3Byte address devices and 4Byte address + devices. + config SPI_SPRD tristate "Spreadtrum SPI controller" depends on ARCH_SPRD || COMPILE_TEST @@ -1005,6 +1106,16 @@ config SPI_STM32 is not available, the driver automatically falls back to PIO mode. +config SPI_STM32_OSPI + tristate "STMicroelectronics STM32 OCTO SPI controller" + depends on ARCH_STM32 || COMPILE_TEST + depends on OF + depends on SPI_MEM + help + This enables support for the Octo SPI controller in master mode. + This driver does not support generic SPI. The implementation only + supports spi-mem interface. + config SPI_STM32_QSPI tristate "STMicroelectronics STM32 QUAD SPI controller" depends on ARCH_STM32 || COMPILE_TEST @@ -1081,10 +1192,10 @@ config SPI_TEGRA210_QUAD config SPI_TEGRA114 tristate "NVIDIA Tegra114 SPI Controller" - depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST + depends on ARCH_TEGRA || COMPILE_TEST depends on RESET_CONTROLLER help - SPI driver for NVIDIA Tegra114 SPI Controller interface. This controller + SPI controller driver for NVIDIA Tegra114 and later SoCs. This controller is different than the older SoCs SPI controller and also register interface get changed with this controller. @@ -1135,6 +1246,17 @@ config SPI_UNIPHIER If your SoC supports SCSSI, say Y here. +config SPI_VIRTIO + tristate "Virtio SPI Controller" + depends on SPI_MASTER && VIRTIO + help + If you say yes to this option, support will be included for the virtio + SPI controller driver. The hardware can be emulated by any device model + software according to the virtio protocol. + + This driver can also be built as a module. If so, the module + will be called spi-virtio. + config SPI_XCOMM tristate "Analog Devices AD-FMCOMMS1-EBZ SPI-I2C-bridge driver" depends on I2C @@ -1194,7 +1316,9 @@ config SPI_ZYNQMP_GQSPI config SPI_AMD tristate "AMD SPI controller" - depends on SPI_MASTER || COMPILE_TEST + depends on PCI + depends on SPI_MASTER || X86 || COMPILE_TEST + depends on SPI_MEM help Enables SPI controller driver for AMD SoC. @@ -1277,4 +1401,21 @@ endif # SPI_SLAVE config SPI_DYNAMIC def_bool ACPI || OF_DYNAMIC || SPI_SLAVE +if SPI_OFFLOAD + +comment "SPI Offload triggers" + +config SPI_OFFLOAD_TRIGGER_ADI_UTIL_SD + tristate "SPI offload trigger using ADI sigma-delta utility" + help + SPI offload trigger from ADI sigma-delta utility FPGA IP block. + +config SPI_OFFLOAD_TRIGGER_PWM + tristate "SPI offload trigger using PWM" + depends on PWM + help + Generic SPI offload trigger implemented using PWM output. + +endif # SPI_OFFLOAD + endif # SPI |