diff options
Diffstat (limited to 'drivers/spi/spi-lm70llp.c')
| -rw-r--r-- | drivers/spi/spi-lm70llp.c | 99 |
1 files changed, 39 insertions, 60 deletions
diff --git a/drivers/spi/spi-lm70llp.c b/drivers/spi/spi-lm70llp.c index 0759b5db9883..e61e89b4119f 100644 --- a/drivers/spi/spi-lm70llp.c +++ b/drivers/spi/spi-lm70llp.c @@ -1,23 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Driver for LM70EVAL-LLP board for the LM70 sensor * * Copyright (C) 2006 Kaiwan N Billimoria <kaiwan@designergraphix.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/init.h> #include <linux/module.h> #include <linux/kernel.h> @@ -27,27 +16,25 @@ #include <linux/sysfs.h> #include <linux/workqueue.h> - #include <linux/spi/spi.h> #include <linux/spi/spi_bitbang.h> - /* * The LM70 communicates with a host processor using a 3-wire variant of * the SPI/Microwire bus interface. This driver specifically supports an * NS LM70 LLP Evaluation Board, interfacing to a PC using its parallel * port to bitbang an SPI-parport bridge. Accordingly, this is an SPI - * master controller driver. The hwmon/lm70 driver is a "SPI protocol + * host controller driver. The hwmon/lm70 driver is a "SPI protocol * driver", layered on top of this one and usable without the lm70llp. * * Datasheet and Schematic: * The LM70 is a temperature sensor chip from National Semiconductor; its - * datasheet is available at http://www.national.com/pf/LM/LM70.html + * datasheet is available at https://www.ti.com/lit/gpn/lm70 * The schematic for this particular board (the LM70EVAL-LLP) is * available (on page 4) here: - * http://www.national.com/appinfo/tempsensors/files/LM70LLPEVALmanual.pdf + * https://download.datasheets.com/pdfs/documentation/nat/kit&board/lm70llpevalmanual.pdf * - * Also see Documentation/spi/spi-lm70llp. The SPI<->parport code here is + * Also see Documentation/spi/spi-lm70llp.rst. The SPI<->parport code here is * (heavily) based on spi-butterfly by David Brownell. * * The LM70 LLP connects to the PC parallel port in the following manner: @@ -92,7 +79,6 @@ struct spi_lm70llp { /* REVISIT : ugly global ; provides "exclusive open" facility */ static struct spi_lm70llp *lm70llp; - /*-------------------------------------------------------------------*/ static inline struct spi_lm70llp *spidev_to_pp(struct spi_device *spi) @@ -126,12 +112,14 @@ static inline void assertCS(struct spi_lm70llp *pp) static inline void clkHigh(struct spi_lm70llp *pp) { u8 data = parport_read_data(pp->port); + parport_write_data(pp->port, data | SCLK); } static inline void clkLow(struct spi_lm70llp *pp) { u8 data = parport_read_data(pp->port); + parport_write_data(pp->port, data & ~SCLK); } @@ -170,8 +158,10 @@ static inline void setmosi(struct spi_device *s, int is_on) static inline int getmiso(struct spi_device *s) { struct spi_lm70llp *pp = spidev_to_pp(s); - return ((SIO == (parport_read_status(pp->port) & SIO)) ? 0 : 1 ); + + return ((SIO == (parport_read_status(pp->port) & SIO)) ? 0 : 1); } + /*--------------------------------------------------------------------*/ #include "spi-bitbang-txrx.h" @@ -189,22 +179,22 @@ static void lm70_chipselect(struct spi_device *spi, int value) /* * Our actual bitbanger routine. */ -static u32 lm70_txrx(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits) +static u32 lm70_txrx(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits, + unsigned flags) { - return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); + return bitbang_txrx_be_cpha0(spi, nsecs, 0, flags, word, bits); } static void spi_lm70llp_attach(struct parport *p) { struct pardevice *pd; struct spi_lm70llp *pp; - struct spi_master *master; + struct spi_controller *host; int status; + struct pardev_cb lm70llp_cb; if (lm70llp) { - printk(KERN_WARNING - "%s: spi_lm70llp instance already loaded. Aborting.\n", - DRVNAME); + pr_warn("spi_lm70llp instance already loaded. Aborting.\n"); return; } @@ -212,17 +202,17 @@ static void spi_lm70llp_attach(struct parport *p) * the lm70 driver could verify it, reading the manf ID. */ - master = spi_alloc_master(p->physport->dev, sizeof *pp); - if (!master) { + host = spi_alloc_host(p->physport->dev, sizeof(*pp)); + if (!host) { status = -ENOMEM; goto out_fail; } - pp = spi_master_get_devdata(master); + pp = spi_controller_get_devdata(host); /* * SPI and bitbang hookup. */ - pp->bitbang.master = spi_master_get(master); + pp->bitbang.ctlr = host; pp->bitbang.chipselect = lm70_chipselect; pp->bitbang.txrx_word[SPI_MODE_0] = lm70_txrx; pp->bitbang.flags = SPI_3WIRE; @@ -231,12 +221,14 @@ static void spi_lm70llp_attach(struct parport *p) * Parport hookup */ pp->port = p; - pd = parport_register_device(p, DRVNAME, - NULL, NULL, NULL, - PARPORT_FLAG_EXCL, pp); + memset(&lm70llp_cb, 0, sizeof(lm70llp_cb)); + lm70llp_cb.private = pp; + lm70llp_cb.flags = PARPORT_FLAG_EXCL; + pd = parport_register_dev_model(p, DRVNAME, &lm70llp_cb, 0); + if (!pd) { status = -ENOMEM; - goto out_free_master; + goto out_free_host; } pp->pd = pd; @@ -249,9 +241,8 @@ static void spi_lm70llp_attach(struct parport *p) */ status = spi_bitbang_start(&pp->bitbang); if (status < 0) { - printk(KERN_WARNING - "%s: spi_bitbang_start failed with status %d\n", - DRVNAME, status); + dev_warn(&pd->dev, "spi_bitbang_start failed with status %d\n", + status); goto out_off_and_release; } @@ -273,12 +264,12 @@ static void spi_lm70llp_attach(struct parport *p) * the board info's (void *)controller_data. */ pp->info.controller_data = pp; - pp->spidev_lm70 = spi_new_device(pp->bitbang.master, &pp->info); + pp->spidev_lm70 = spi_new_device(pp->bitbang.ctlr, &pp->info); if (pp->spidev_lm70) dev_dbg(&pp->spidev_lm70->dev, "spidev_lm70 at %s\n", - dev_name(&pp->spidev_lm70->dev)); + dev_name(&pp->spidev_lm70->dev)); else { - printk(KERN_WARNING "%s: spi_new_device failed\n", DRVNAME); + dev_warn(&pd->dev, "spi_new_device failed\n"); status = -ENODEV; goto out_bitbang_stop; } @@ -296,10 +287,10 @@ out_off_and_release: parport_release(pp->pd); out_parport_unreg: parport_unregister_device(pd); -out_free_master: - (void) spi_master_put(master); +out_free_host: + spi_controller_put(host); out_fail: - pr_info("%s: spi_lm70llp probe fail, status %d\n", DRVNAME, status); + pr_info("spi_lm70llp probe fail, status %d\n", status); } static void spi_lm70llp_detach(struct parport *p) @@ -318,29 +309,17 @@ static void spi_lm70llp_detach(struct parport *p) parport_release(pp->pd); parport_unregister_device(pp->pd); - (void) spi_master_put(pp->bitbang.master); + spi_controller_put(pp->bitbang.ctlr); lm70llp = NULL; } - static struct parport_driver spi_lm70llp_drv = { .name = DRVNAME, - .attach = spi_lm70llp_attach, + .match_port = spi_lm70llp_attach, .detach = spi_lm70llp_detach, }; - -static int __init init_spi_lm70llp(void) -{ - return parport_register_driver(&spi_lm70llp_drv); -} -module_init(init_spi_lm70llp); - -static void __exit cleanup_spi_lm70llp(void) -{ - parport_unregister_driver(&spi_lm70llp_drv); -} -module_exit(cleanup_spi_lm70llp); +module_parport_driver(spi_lm70llp_drv); MODULE_AUTHOR("Kaiwan N Billimoria <kaiwan@designergraphix.com>"); MODULE_DESCRIPTION( |