diff options
Diffstat (limited to 'drivers/spi/spi-mem.c')
| -rw-r--r-- | drivers/spi/spi-mem.c | 108 |
1 files changed, 108 insertions, 0 deletions
diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c index 17b8baf749e6..c8b2add2640e 100644 --- a/drivers/spi/spi-mem.c +++ b/drivers/spi/spi-mem.c @@ -12,6 +12,9 @@ #include <linux/spi/spi-mem.h> #include <linux/sched/task_stack.h> +#define CREATE_TRACE_POINTS +#include <trace/events/spi-mem.h> + #include "internals.h" #define SPI_MEM_MAX_BUSWIDTH 8 @@ -172,6 +175,9 @@ bool spi_mem_default_supports_op(struct spi_mem *mem, if (!spi_mem_controller_is_capable(ctlr, dtr)) return false; + if (op->data.swap16 && !spi_mem_controller_is_capable(ctlr, swap16)) + return false; + if (op->cmd.nbytes != 2) return false; } else { @@ -184,6 +190,16 @@ bool spi_mem_default_supports_op(struct spi_mem *mem, return false; } + if (op->max_freq && mem->spi->controller->min_speed_hz && + op->max_freq < mem->spi->controller->min_speed_hz) + return false; + + if (op->max_freq && + op->max_freq < mem->spi->max_speed_hz) { + if (!spi_mem_controller_is_capable(ctlr, per_op_freq)) + return false; + } + return spi_mem_check_buswidth(mem, op); } EXPORT_SYMBOL_GPL(spi_mem_default_supports_op); @@ -252,6 +268,9 @@ static bool spi_mem_internal_supports_op(struct spi_mem *mem, */ bool spi_mem_supports_op(struct spi_mem *mem, const struct spi_mem_op *op) { + /* Make sure the operation frequency is correct before going futher */ + spi_mem_adjust_op_freq(mem, (struct spi_mem_op *)op); + if (spi_mem_check_op(op)) return false; @@ -361,6 +380,20 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) u8 *tmpbuf; int ret; + /* Make sure the operation frequency is correct before going futher */ + spi_mem_adjust_op_freq(mem, (struct spi_mem_op *)op); + + dev_vdbg(&mem->spi->dev, "[cmd: 0x%02x][%dB addr: %#8llx][%2dB dummy][%4dB data %s] %d%c-%d%c-%d%c-%d%c @ %uHz\n", + op->cmd.opcode, + op->addr.nbytes, (op->addr.nbytes ? op->addr.val : 0), + op->dummy.nbytes, + op->data.nbytes, (op->data.nbytes ? (op->data.dir == SPI_MEM_DATA_IN ? " read" : "write") : " "), + op->cmd.buswidth, op->cmd.dtr ? 'D' : 'S', + op->addr.buswidth, op->addr.dtr ? 'D' : 'S', + op->dummy.buswidth, op->dummy.dtr ? 'D' : 'S', + op->data.buswidth, op->data.dtr ? 'D' : 'S', + op->max_freq ? op->max_freq : mem->spi->max_speed_hz); + ret = spi_mem_check_op(op); if (ret) return ret; @@ -373,7 +406,9 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) if (ret) return ret; + trace_spi_mem_start_op(mem, op); ret = ctlr->mem_ops->exec_op(mem, op); + trace_spi_mem_stop_op(mem, op); spi_mem_access_end(mem); @@ -407,6 +442,7 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) xfers[xferpos].tx_buf = tmpbuf; xfers[xferpos].len = op->cmd.nbytes; xfers[xferpos].tx_nbits = op->cmd.buswidth; + xfers[xferpos].speed_hz = op->max_freq; spi_message_add_tail(&xfers[xferpos], &msg); xferpos++; totalxferlen++; @@ -421,6 +457,7 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) xfers[xferpos].tx_buf = tmpbuf + 1; xfers[xferpos].len = op->addr.nbytes; xfers[xferpos].tx_nbits = op->addr.buswidth; + xfers[xferpos].speed_hz = op->max_freq; spi_message_add_tail(&xfers[xferpos], &msg); xferpos++; totalxferlen += op->addr.nbytes; @@ -432,6 +469,7 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) xfers[xferpos].len = op->dummy.nbytes; xfers[xferpos].tx_nbits = op->dummy.buswidth; xfers[xferpos].dummy_data = 1; + xfers[xferpos].speed_hz = op->max_freq; spi_message_add_tail(&xfers[xferpos], &msg); xferpos++; totalxferlen += op->dummy.nbytes; @@ -447,6 +485,7 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) } xfers[xferpos].len = op->data.nbytes; + xfers[xferpos].speed_hz = op->max_freq; spi_message_add_tail(&xfers[xferpos], &msg); xferpos++; totalxferlen += op->data.nbytes; @@ -525,6 +564,75 @@ int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op) } EXPORT_SYMBOL_GPL(spi_mem_adjust_op_size); +/** + * spi_mem_adjust_op_freq() - Adjust the frequency of a SPI mem operation to + * match controller, PCB and chip limitations + * @mem: the SPI memory + * @op: the operation to adjust + * + * Some chips have per-op frequency limitations and must adapt the maximum + * speed. This function allows SPI mem drivers to set @op->max_freq to the + * maximum supported value. + */ +void spi_mem_adjust_op_freq(struct spi_mem *mem, struct spi_mem_op *op) +{ + if (!op->max_freq || op->max_freq > mem->spi->max_speed_hz) + op->max_freq = mem->spi->max_speed_hz; +} +EXPORT_SYMBOL_GPL(spi_mem_adjust_op_freq); + +/** + * spi_mem_calc_op_duration() - Derives the theoretical length (in ns) of an + * operation. This helps finding the best variant + * among a list of possible choices. + * @mem: the SPI memory + * @op: the operation to benchmark + * + * Some chips have per-op frequency limitations, PCBs usually have their own + * limitations as well, and controllers can support dual, quad or even octal + * modes, sometimes in DTR. All these combinations make it impossible to + * statically list the best combination for all situations. If we want something + * accurate, all these combinations should be rated (eg. with a time estimate) + * and the best pick should be taken based on these calculations. + * + * Returns a ns estimate for the time this op would take, except if no + * frequency limit has been set, in this case we return the number of + * cycles nevertheless to allow callers to distinguish which operation + * would be the fastest at iso-frequency. + */ +u64 spi_mem_calc_op_duration(struct spi_mem *mem, struct spi_mem_op *op) +{ + u64 ncycles = 0; + u64 ps_per_cycles, duration; + + spi_mem_adjust_op_freq(mem, op); + + if (op->max_freq) { + ps_per_cycles = 1000000000000ULL; + do_div(ps_per_cycles, op->max_freq); + } else { + /* In this case, the unit is no longer a time unit */ + ps_per_cycles = 1; + } + + ncycles += ((op->cmd.nbytes * 8) / op->cmd.buswidth) / (op->cmd.dtr ? 2 : 1); + ncycles += ((op->addr.nbytes * 8) / op->addr.buswidth) / (op->addr.dtr ? 2 : 1); + + /* Dummy bytes are optional for some SPI flash memory operations */ + if (op->dummy.nbytes) + ncycles += ((op->dummy.nbytes * 8) / op->dummy.buswidth) / (op->dummy.dtr ? 2 : 1); + + ncycles += ((op->data.nbytes * 8) / op->data.buswidth) / (op->data.dtr ? 2 : 1); + + /* Derive the duration in ps */ + duration = ncycles * ps_per_cycles; + /* Convert into ns */ + do_div(duration, 1000); + + return duration; +} +EXPORT_SYMBOL_GPL(spi_mem_calc_op_duration); + static ssize_t spi_mem_no_dirmap_read(struct spi_mem_dirmap_desc *desc, u64 offs, size_t len, void *buf) { |