diff options
Diffstat (limited to 'drivers/spi/spi-omap-uwire.c')
| -rw-r--r-- | drivers/spi/spi-omap-uwire.c | 60 |
1 files changed, 23 insertions, 37 deletions
diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c index 29198e6815b2..b9a91dbfeaef 100644 --- a/drivers/spi/spi-omap-uwire.c +++ b/drivers/spi/spi-omap-uwire.c @@ -99,7 +99,7 @@ struct uwire_state { * Or, put it in a structure which is used throughout the driver; * that avoids having to issue two loads for each bit of static data. */ -static unsigned int uwire_idx_shift; +static unsigned int uwire_idx_shift = 2; static void __iomem *uwire_base; static inline void uwire_write_reg(int idx, u16 val) @@ -179,7 +179,7 @@ static void uwire_chipselect(struct spi_device *spi, int value) w = uwire_read_reg(UWIRE_CSR); old_cs = (w >> 10) & 0x03; - if (value == BITBANG_CS_INACTIVE || old_cs != spi->chip_select) { + if (value == BITBANG_CS_INACTIVE || old_cs != spi_get_chipselect(spi, 0)) { /* Deselect this CS, or the previous CS */ w &= ~CS_CMD; uwire_write_reg(UWIRE_CSR, w); @@ -193,7 +193,7 @@ static void uwire_chipselect(struct spi_device *spi, int value) else uwire_write_reg(UWIRE_SR4, 0); - w = spi->chip_select << 10; + w = spi_get_chipselect(spi, 0) << 10; w |= CS_CMD; uwire_write_reg(UWIRE_CSR, w); } @@ -210,7 +210,7 @@ static int uwire_txrx(struct spi_device *spi, struct spi_transfer *t) if (!t->tx_buf && !t->rx_buf) return 0; - w = spi->chip_select << 10; + w = spi_get_chipselect(spi, 0) << 10; w |= CS_CMD; if (t->tx_buf) { @@ -315,7 +315,7 @@ static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t) int div2; int status; - uwire = spi_master_get_devdata(spi->master); + uwire = spi_controller_get_devdata(spi->controller); /* mode 0..3, clock inverted separately; * standard nCS signaling; @@ -408,7 +408,7 @@ static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t) rate /= 8; break; } - omap_uwire_configure_mode(spi->chip_select, flags); + omap_uwire_configure_mode(spi_get_chipselect(spi, 0), flags); pr_debug("%s: uwire flags %02x, armxor %lu KHz, SCK %lu KHz\n", __func__, flags, clk_get_rate(uwire->ck) / 1000, @@ -448,25 +448,25 @@ static void uwire_off(struct uwire_spi *uwire) { uwire_write_reg(UWIRE_SR3, 0); clk_disable_unprepare(uwire->ck); - spi_master_put(uwire->bitbang.master); + spi_controller_put(uwire->bitbang.ctlr); } static int uwire_probe(struct platform_device *pdev) { - struct spi_master *master; + struct spi_controller *host; struct uwire_spi *uwire; int status; - master = spi_alloc_master(&pdev->dev, sizeof(*uwire)); - if (!master) + host = spi_alloc_host(&pdev->dev, sizeof(*uwire)); + if (!host) return -ENODEV; - uwire = spi_master_get_devdata(master); + uwire = spi_controller_get_devdata(host); uwire_base = devm_ioremap(&pdev->dev, UWIRE_BASE_PHYS, UWIRE_IO_SIZE); if (!uwire_base) { dev_dbg(&pdev->dev, "can't ioremap UWIRE\n"); - spi_master_put(master); + spi_controller_put(host); return -ENOMEM; } @@ -476,29 +476,24 @@ static int uwire_probe(struct platform_device *pdev) if (IS_ERR(uwire->ck)) { status = PTR_ERR(uwire->ck); dev_dbg(&pdev->dev, "no functional clock?\n"); - spi_master_put(master); + spi_controller_put(host); return status; } clk_prepare_enable(uwire->ck); - if (cpu_is_omap7xx()) - uwire_idx_shift = 1; - else - uwire_idx_shift = 2; - uwire_write_reg(UWIRE_SR3, 1); /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; - master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 16); - master->flags = SPI_MASTER_HALF_DUPLEX; + host->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + host->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 16); + host->flags = SPI_CONTROLLER_HALF_DUPLEX; - master->bus_num = 2; /* "official" */ - master->num_chipselect = 4; - master->setup = uwire_setup; - master->cleanup = uwire_cleanup; + host->bus_num = 2; /* "official" */ + host->num_chipselect = 4; + host->setup = uwire_setup; + host->cleanup = uwire_cleanup; - uwire->bitbang.master = master; + uwire->bitbang.ctlr = host; uwire->bitbang.chipselect = uwire_chipselect; uwire->bitbang.setup_transfer = uwire_setup_transfer; uwire->bitbang.txrx_bufs = uwire_txrx; @@ -510,7 +505,7 @@ static int uwire_probe(struct platform_device *pdev) return status; } -static int uwire_remove(struct platform_device *pdev) +static void uwire_remove(struct platform_device *pdev) { struct uwire_spi *uwire = platform_get_drvdata(pdev); @@ -518,7 +513,6 @@ static int uwire_remove(struct platform_device *pdev) spi_bitbang_stop(&uwire->bitbang); uwire_off(uwire); - return 0; } /* work with hotplug and coldplug */ @@ -536,15 +530,6 @@ static struct platform_driver uwire_driver = { static int __init omap_uwire_init(void) { - /* FIXME move these into the relevant board init code. also, include - * H3 support; it uses tsc2101 like H2 (on a different chipselect). - */ - - if (machine_is_omap_h2()) { - /* defaults: W21 SDO, U18 SDI, V19 SCL */ - omap_cfg_reg(N14_1610_UWIRE_CS0); - omap_cfg_reg(N15_1610_UWIRE_CS1); - } return platform_driver_register(&uwire_driver); } @@ -556,5 +541,6 @@ static void __exit omap_uwire_exit(void) subsys_initcall(omap_uwire_init); module_exit(omap_uwire_exit); +MODULE_DESCRIPTION("MicroWire interface driver for OMAP"); MODULE_LICENSE("GPL"); |