1 files changed, 0 insertions, 112 deletions
diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c
deleted file mode 100644
index 4f7e2fe21254..000000000000
--- a/drivers/staging/comedi/drivers/ni_labpc_cs.c
+++ /dev/null
@@ -1,112 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Driver for National Instruments daqcard-1200 boards
- * Copyright (C) 2001, 2002, 2003 Frank Mori Hess <fmhess@users.sourceforge.net>
- *
- * PCMCIA crap is adapted from dummy_cs.c 1.31 2001/08/24 12:13:13
- * from the pcmcia package.
- * The initial developer of the pcmcia dummy_cs.c code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.
- */
-
-/*
- * Driver: ni_labpc_cs
- * Description: National Instruments Lab-PC (& compatibles)
- * Author: Frank Mori Hess <fmhess@users.sourceforge.net>
- * Devices: [National Instruments] DAQCard-1200 (daqcard-1200)
- * Status: works
- *
- * Thanks go to Fredrik Lingvall for much testing and perseverance in
- * helping to debug daqcard-1200 support.
- *
- * The 1200 series boards have onboard calibration dacs for correcting
- * analog input/output offsets and gains. The proper settings for these
- * caldacs are stored on the board's eeprom. To read the caldac values
- * from the eeprom and store them into a file that can be then be used by
- * comedilib, use the comedi_calibrate program.
- *
- * Configuration options: none
- *
- * The daqcard-1200 has quirky chanlist requirements when scanning multiple
- * channels. Multiple channel scan sequence must start at highest channel,
- * then decrement down to channel 0.  Chanlists consisting of all one channel
- * are also legal, and allow you to pace conversions in bursts.
- *
- * NI manuals:
- *   340988a (daqcard-1200)
- */
-
-#include <linux/module.h>
-
-#include "../comedi_pcmcia.h"
-
-#include "ni_labpc.h"
-
-static const struct labpc_boardinfo labpc_cs_boards[] = {
-	{
-		.name			= "daqcard-1200",
-		.ai_speed		= 10000,
-		.has_ao			= 1,
-		.is_labpc1200		= 1,
-	},
-};
-
-static int labpc_cs_auto_attach(struct comedi_device *dev,
-				unsigned long context)
-{
-	struct pcmcia_device *link = comedi_to_pcmcia_dev(dev);
-	int ret;
-
-	/* The ni_labpc driver needs the board_ptr */
-	dev->board_ptr = &labpc_cs_boards[0];
-
-	link->config_flags |= CONF_AUTO_SET_IO |
-			      CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ;
-	ret = comedi_pcmcia_enable(dev, NULL);
-	if (ret)
-		return ret;
-	dev->iobase = link->resource[0]->start;
-
-	if (!link->irq)
-		return -EINVAL;
-
-	return labpc_common_attach(dev, link->irq, IRQF_SHARED);
-}
-
-static void labpc_cs_detach(struct comedi_device *dev)
-{
-	labpc_common_detach(dev);
-	comedi_pcmcia_disable(dev);
-}
-
-static struct comedi_driver driver_labpc_cs = {
-	.driver_name	= "ni_labpc_cs",
-	.module		= THIS_MODULE,
-	.auto_attach	= labpc_cs_auto_attach,
-	.detach		= labpc_cs_detach,
-};
-
-static int labpc_cs_attach(struct pcmcia_device *link)
-{
-	return comedi_pcmcia_auto_config(link, &driver_labpc_cs);
-}
-
-static const struct pcmcia_device_id labpc_cs_ids[] = {
-	PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0103),	/* daqcard-1200 */
-	PCMCIA_DEVICE_NULL
-};
-MODULE_DEVICE_TABLE(pcmcia, labpc_cs_ids);
-
-static struct pcmcia_driver labpc_cs_driver = {
-	.name		= "daqcard-1200",
-	.owner		= THIS_MODULE,
-	.id_table	= labpc_cs_ids,
-	.probe		= labpc_cs_attach,
-	.remove		= comedi_pcmcia_auto_unconfig,
-};
-module_comedi_pcmcia_driver(driver_labpc_cs, labpc_cs_driver);
-
-MODULE_DESCRIPTION("Comedi driver for National Instruments Lab-PC");
-MODULE_AUTHOR("Frank Mori Hess <fmhess@users.sourceforge.net>");
-MODULE_LICENSE("GPL");