diff options
Diffstat (limited to 'drivers/staging/comedi/drivers/pcmda12.c')
-rw-r--r-- | drivers/staging/comedi/drivers/pcmda12.c | 165 |
1 files changed, 0 insertions, 165 deletions
diff --git a/drivers/staging/comedi/drivers/pcmda12.c b/drivers/staging/comedi/drivers/pcmda12.c deleted file mode 100644 index 14ab1f0d1e9f..000000000000 --- a/drivers/staging/comedi/drivers/pcmda12.c +++ /dev/null @@ -1,165 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * pcmda12.c - * Driver for Winsystems PC-104 based PCM-D/A-12 8-channel AO board. - * - * COMEDI - Linux Control and Measurement Device Interface - * Copyright (C) 2006 Calin A. Culianu <calin@ajvar.org> - */ - -/* - * Driver: pcmda12 - * Description: A driver for the Winsystems PCM-D/A-12 - * Devices: [Winsystems] PCM-D/A-12 (pcmda12) - * Author: Calin Culianu <calin@ajvar.org> - * Updated: Fri, 13 Jan 2006 12:01:01 -0500 - * Status: works - * - * A driver for the relatively straightforward-to-program PCM-D/A-12. - * This board doesn't support commands, and the only way to set its - * analog output range is to jumper the board. As such, - * comedi_data_write() ignores the range value specified. - * - * The board uses 16 consecutive I/O addresses starting at the I/O port - * base address. Each address corresponds to the LSB then MSB of a - * particular channel from 0-7. - * - * Note that the board is not ISA-PNP capable and thus needs the I/O - * port comedi_config parameter. - * - * Note that passing a nonzero value as the second config option will - * enable "simultaneous xfer" mode for this board, in which AO writes - * will not take effect until a subsequent read of any AO channel. This - * is so that one can speed up programming by preloading all AO registers - * with values before simultaneously setting them to take effect with one - * read command. - * - * Configuration Options: - * [0] - I/O port base address - * [1] - Do Simultaneous Xfer (see description) - */ - -#include <linux/module.h> -#include "../comedidev.h" - -/* AI range is not configurable, it's set by jumpers on the board */ -static const struct comedi_lrange pcmda12_ranges = { - 3, { - UNI_RANGE(5), - UNI_RANGE(10), - BIP_RANGE(5) - } -}; - -struct pcmda12_private { - int simultaneous_xfer_mode; -}; - -static int pcmda12_ao_insn_write(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data) -{ - struct pcmda12_private *devpriv = dev->private; - unsigned int chan = CR_CHAN(insn->chanspec); - unsigned int val = s->readback[chan]; - unsigned long ioreg = dev->iobase + (chan * 2); - int i; - - for (i = 0; i < insn->n; ++i) { - val = data[i]; - outb(val & 0xff, ioreg); - outb((val >> 8) & 0xff, ioreg + 1); - - /* - * Initiate transfer if not in simultaneaous xfer - * mode by reading one of the AO registers. - */ - if (!devpriv->simultaneous_xfer_mode) - inb(ioreg); - } - s->readback[chan] = val; - - return insn->n; -} - -static int pcmda12_ao_insn_read(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data) -{ - struct pcmda12_private *devpriv = dev->private; - - /* - * Initiate simultaneaous xfer mode by reading one of the - * AO registers. All analog outputs will then be updated. - */ - if (devpriv->simultaneous_xfer_mode) - inb(dev->iobase); - - return comedi_readback_insn_read(dev, s, insn, data); -} - -static void pcmda12_ao_reset(struct comedi_device *dev, - struct comedi_subdevice *s) -{ - int i; - - for (i = 0; i < s->n_chan; ++i) { - outb(0, dev->iobase + (i * 2)); - outb(0, dev->iobase + (i * 2) + 1); - } - /* Initiate transfer by reading one of the AO registers. */ - inb(dev->iobase); -} - -static int pcmda12_attach(struct comedi_device *dev, - struct comedi_devconfig *it) -{ - struct pcmda12_private *devpriv; - struct comedi_subdevice *s; - int ret; - - ret = comedi_request_region(dev, it->options[0], 0x10); - if (ret) - return ret; - - devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv)); - if (!devpriv) - return -ENOMEM; - - devpriv->simultaneous_xfer_mode = it->options[1]; - - ret = comedi_alloc_subdevices(dev, 1); - if (ret) - return ret; - - s = &dev->subdevices[0]; - s->type = COMEDI_SUBD_AO; - s->subdev_flags = SDF_READABLE | SDF_WRITABLE; - s->n_chan = 8; - s->maxdata = 0x0fff; - s->range_table = &pcmda12_ranges; - s->insn_write = pcmda12_ao_insn_write; - s->insn_read = pcmda12_ao_insn_read; - - ret = comedi_alloc_subdev_readback(s); - if (ret) - return ret; - - pcmda12_ao_reset(dev, s); - - return 0; -} - -static struct comedi_driver pcmda12_driver = { - .driver_name = "pcmda12", - .module = THIS_MODULE, - .attach = pcmda12_attach, - .detach = comedi_legacy_detach, -}; -module_comedi_driver(pcmda12_driver); - -MODULE_AUTHOR("Comedi https://www.comedi.org"); -MODULE_DESCRIPTION("Comedi low-level driver"); -MODULE_LICENSE("GPL"); |