diff options
Diffstat (limited to 'drivers/staging/irda/drivers/ali-ircc.c')
| -rw-r--r-- | drivers/staging/irda/drivers/ali-ircc.c | 2217 |
1 files changed, 0 insertions, 2217 deletions
diff --git a/drivers/staging/irda/drivers/ali-ircc.c b/drivers/staging/irda/drivers/ali-ircc.c deleted file mode 100644 index 589cd01797f4..000000000000 --- a/drivers/staging/irda/drivers/ali-ircc.c +++ /dev/null @@ -1,2217 +0,0 @@ -/********************************************************************* - * - * Filename: ali-ircc.h - * Version: 0.5 - * Description: Driver for the ALI M1535D and M1543C FIR Controller - * Status: Experimental. - * Author: Benjamin Kong <benjamin_kong@ali.com.tw> - * Created at: 2000/10/16 03:46PM - * Modified at: 2001/1/3 02:55PM - * Modified by: Benjamin Kong <benjamin_kong@ali.com.tw> - * Modified at: 2003/11/6 and support for ALi south-bridge chipsets M1563 - * Modified by: Clear Zhang <clear_zhang@ali.com.tw> - * - * Copyright (c) 2000 Benjamin Kong <benjamin_kong@ali.com.tw> - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - ********************************************************************/ - -#include <linux/module.h> -#include <linux/gfp.h> - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/rtnetlink.h> -#include <linux/serial_reg.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> - -#include <asm/io.h> -#include <asm/dma.h> -#include <asm/byteorder.h> - -#include <net/irda/wrapper.h> -#include <net/irda/irda.h> -#include <net/irda/irda_device.h> - -#include "ali-ircc.h" - -#define CHIP_IO_EXTENT 8 -#define BROKEN_DONGLE_ID - -#define ALI_IRCC_DRIVER_NAME "ali-ircc" - -/* Power Management */ -static int ali_ircc_suspend(struct platform_device *dev, pm_message_t state); -static int ali_ircc_resume(struct platform_device *dev); - -static struct platform_driver ali_ircc_driver = { - .suspend = ali_ircc_suspend, - .resume = ali_ircc_resume, - .driver = { - .name = ALI_IRCC_DRIVER_NAME, - }, -}; - -/* Module parameters */ -static int qos_mtt_bits = 0x07; /* 1 ms or more */ - -/* Use BIOS settions by default, but user may supply module parameters */ -static unsigned int io[] = { ~0, ~0, ~0, ~0 }; -static unsigned int irq[] = { 0, 0, 0, 0 }; -static unsigned int dma[] = { 0, 0, 0, 0 }; - -static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info); -static int ali_ircc_init_43(ali_chip_t *chip, chipio_t *info); -static int ali_ircc_init_53(ali_chip_t *chip, chipio_t *info); - -/* These are the currently known ALi south-bridge chipsets, the only one difference - * is that M1543C doesn't support HP HDSL-3600 - */ -static ali_chip_t chips[] = -{ - { "M1543", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x43, ali_ircc_probe_53, ali_ircc_init_43 }, - { "M1535", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x53, ali_ircc_probe_53, ali_ircc_init_53 }, - { "M1563", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x63, ali_ircc_probe_53, ali_ircc_init_53 }, - { NULL } -}; - -/* Max 4 instances for now */ -static struct ali_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL }; - -/* Dongle Types */ -static char *dongle_types[] = { - "TFDS6000", - "HP HSDL-3600", - "HP HSDL-1100", - "No dongle connected", -}; - -/* Some prototypes */ -static int ali_ircc_open(int i, chipio_t *info); - -static int ali_ircc_close(struct ali_ircc_cb *self); - -static int ali_ircc_setup(chipio_t *info); -static int ali_ircc_is_receiving(struct ali_ircc_cb *self); -static int ali_ircc_net_open(struct net_device *dev); -static int ali_ircc_net_close(struct net_device *dev); -static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud); - -/* SIR function */ -static netdev_tx_t ali_ircc_sir_hard_xmit(struct sk_buff *skb, - struct net_device *dev); -static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self); -static void ali_ircc_sir_receive(struct ali_ircc_cb *self); -static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self); -static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len); -static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed); - -/* FIR function */ -static netdev_tx_t ali_ircc_fir_hard_xmit(struct sk_buff *skb, - struct net_device *dev); -static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 speed); -static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self); -static int ali_ircc_dma_receive(struct ali_ircc_cb *self); -static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self); -static int ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self); -static void ali_ircc_dma_xmit(struct ali_ircc_cb *self); - -/* My Function */ -static int ali_ircc_read_dongle_id (int i, chipio_t *info); -static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed); - -/* ALi chip function */ -static void SIR2FIR(int iobase); -static void FIR2SIR(int iobase); -static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable); - -/* - * Function ali_ircc_init () - * - * Initialize chip. Find out whay kinds of chips we are dealing with - * and their configuration registers address - */ -static int __init ali_ircc_init(void) -{ - ali_chip_t *chip; - chipio_t info; - int ret; - int cfg, cfg_base; - int reg, revision; - int i = 0; - - ret = platform_driver_register(&ali_ircc_driver); - if (ret) { - net_err_ratelimited("%s, Can't register driver!\n", - ALI_IRCC_DRIVER_NAME); - return ret; - } - - ret = -ENODEV; - - /* Probe for all the ALi chipsets we know about */ - for (chip= chips; chip->name; chip++, i++) - { - pr_debug("%s(), Probing for %s ...\n", __func__, chip->name); - - /* Try all config registers for this chip */ - for (cfg=0; cfg<2; cfg++) - { - cfg_base = chip->cfg[cfg]; - if (!cfg_base) - continue; - - memset(&info, 0, sizeof(chipio_t)); - info.cfg_base = cfg_base; - info.fir_base = io[i]; - info.dma = dma[i]; - info.irq = irq[i]; - - - /* Enter Configuration */ - outb(chip->entr1, cfg_base); - outb(chip->entr2, cfg_base); - - /* Select Logical Device 5 Registers (UART2) */ - outb(0x07, cfg_base); - outb(0x05, cfg_base+1); - - /* Read Chip Identification Register */ - outb(chip->cid_index, cfg_base); - reg = inb(cfg_base+1); - - if (reg == chip->cid_value) - { - pr_debug("%s(), Chip found at 0x%03x\n", - __func__, cfg_base); - - outb(0x1F, cfg_base); - revision = inb(cfg_base+1); - pr_debug("%s(), Found %s chip, revision=%d\n", - __func__, chip->name, revision); - - /* - * If the user supplies the base address, then - * we init the chip, if not we probe the values - * set by the BIOS - */ - if (io[i] < 2000) - { - chip->init(chip, &info); - } - else - { - chip->probe(chip, &info); - } - - if (ali_ircc_open(i, &info) == 0) - ret = 0; - i++; - } - else - { - pr_debug("%s(), No %s chip at 0x%03x\n", - __func__, chip->name, cfg_base); - } - /* Exit configuration */ - outb(0xbb, cfg_base); - } - } - - if (ret) - platform_driver_unregister(&ali_ircc_driver); - - return ret; -} - -/* - * Function ali_ircc_cleanup () - * - * Close all configured chips - * - */ -static void __exit ali_ircc_cleanup(void) -{ - int i; - - for (i=0; i < ARRAY_SIZE(dev_self); i++) { - if (dev_self[i]) - ali_ircc_close(dev_self[i]); - } - - platform_driver_unregister(&ali_ircc_driver); - -} - -static const struct net_device_ops ali_ircc_sir_ops = { - .ndo_open = ali_ircc_net_open, - .ndo_stop = ali_ircc_net_close, - .ndo_start_xmit = ali_ircc_sir_hard_xmit, - .ndo_do_ioctl = ali_ircc_net_ioctl, -}; - -static const struct net_device_ops ali_ircc_fir_ops = { - .ndo_open = ali_ircc_net_open, - .ndo_stop = ali_ircc_net_close, - .ndo_start_xmit = ali_ircc_fir_hard_xmit, - .ndo_do_ioctl = ali_ircc_net_ioctl, -}; - -/* - * Function ali_ircc_open (int i, chipio_t *inf) - * - * Open driver instance - * - */ -static int ali_ircc_open(int i, chipio_t *info) -{ - struct net_device *dev; - struct ali_ircc_cb *self; - int dongle_id; - int err; - - if (i >= ARRAY_SIZE(dev_self)) { - net_err_ratelimited("%s(), maximum number of supported chips reached!\n", - __func__); - return -ENOMEM; - } - - /* Set FIR FIFO and DMA Threshold */ - if ((ali_ircc_setup(info)) == -1) - return -1; - - dev = alloc_irdadev(sizeof(*self)); - if (dev == NULL) { - net_err_ratelimited("%s(), can't allocate memory for control block!\n", - __func__); - return -ENOMEM; - } - - self = netdev_priv(dev); - self->netdev = dev; - spin_lock_init(&self->lock); - - /* Need to store self somewhere */ - dev_self[i] = self; - self->index = i; - - /* Initialize IO */ - self->io.cfg_base = info->cfg_base; /* In ali_ircc_probe_53 assign */ - self->io.fir_base = info->fir_base; /* info->sir_base = info->fir_base */ - self->io.sir_base = info->sir_base; /* ALi SIR and FIR use the same address */ - self->io.irq = info->irq; - self->io.fir_ext = CHIP_IO_EXTENT; - self->io.dma = info->dma; - self->io.fifo_size = 16; /* SIR: 16, FIR: 32 Benjamin 2000/11/1 */ - - /* Reserve the ioports that we need */ - if (!request_region(self->io.fir_base, self->io.fir_ext, - ALI_IRCC_DRIVER_NAME)) { - net_warn_ratelimited("%s(), can't get iobase of 0x%03x\n", - __func__, self->io.fir_base); - err = -ENODEV; - goto err_out1; - } - - /* Initialize QoS for this device */ - irda_init_max_qos_capabilies(&self->qos); - - /* The only value we must override it the baudrate */ - self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600| - IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8); // benjamin 2000/11/8 05:27PM - - self->qos.min_turn_time.bits = qos_mtt_bits; - - irda_qos_bits_to_value(&self->qos); - - /* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */ - self->rx_buff.truesize = 14384; - self->tx_buff.truesize = 14384; - - /* Allocate memory if needed */ - self->rx_buff.head = - dma_zalloc_coherent(NULL, self->rx_buff.truesize, - &self->rx_buff_dma, GFP_KERNEL); - if (self->rx_buff.head == NULL) { - err = -ENOMEM; - goto err_out2; - } - - self->tx_buff.head = - dma_zalloc_coherent(NULL, self->tx_buff.truesize, - &self->tx_buff_dma, GFP_KERNEL); - if (self->tx_buff.head == NULL) { - err = -ENOMEM; - goto err_out3; - } - - self->rx_buff.in_frame = FALSE; - self->rx_buff.state = OUTSIDE_FRAME; - self->tx_buff.data = self->tx_buff.head; - self->rx_buff.data = self->rx_buff.head; - - /* Reset Tx queue info */ - self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0; - self->tx_fifo.tail = self->tx_buff.head; - - /* Override the network functions we need to use */ - dev->netdev_ops = &ali_ircc_sir_ops; - - err = register_netdev(dev); - if (err) { - net_err_ratelimited("%s(), register_netdev() failed!\n", - __func__); - goto err_out4; - } - net_info_ratelimited("IrDA: Registered device %s\n", dev->name); - - /* Check dongle id */ - dongle_id = ali_ircc_read_dongle_id(i, info); - net_info_ratelimited("%s(), %s, Found dongle: %s\n", - __func__, ALI_IRCC_DRIVER_NAME, - dongle_types[dongle_id]); - - self->io.dongle_id = dongle_id; - - - return 0; - - err_out4: - dma_free_coherent(NULL, self->tx_buff.truesize, - self->tx_buff.head, self->tx_buff_dma); - err_out3: - dma_free_coherent(NULL, self->rx_buff.truesize, - self->rx_buff.head, self->rx_buff_dma); - err_out2: - release_region(self->io.fir_base, self->io.fir_ext); - err_out1: - dev_self[i] = NULL; - free_netdev(dev); - return err; -} - - -/* - * Function ali_ircc_close (self) - * - * Close driver instance - * - */ -static int __exit ali_ircc_close(struct ali_ircc_cb *self) -{ - int iobase; - - IRDA_ASSERT(self != NULL, return -1;); - - iobase = self->io.fir_base; - - /* Remove netdevice */ - unregister_netdev(self->netdev); - - /* Release the PORT that this driver is using */ - pr_debug("%s(), Releasing Region %03x\n", __func__, self->io.fir_base); - release_region(self->io.fir_base, self->io.fir_ext); - - if (self->tx_buff.head) - dma_free_coherent(NULL, self->tx_buff.truesize, - self->tx_buff.head, self->tx_buff_dma); - - if (self->rx_buff.head) - dma_free_coherent(NULL, self->rx_buff.truesize, - self->rx_buff.head, self->rx_buff_dma); - - dev_self[self->index] = NULL; - free_netdev(self->netdev); - - - return 0; -} - -/* - * Function ali_ircc_init_43 (chip, info) - * - * Initialize the ALi M1543 chip. - */ -static int ali_ircc_init_43(ali_chip_t *chip, chipio_t *info) -{ - /* All controller information like I/O address, DMA channel, IRQ - * are set by BIOS - */ - - return 0; -} - -/* - * Function ali_ircc_init_53 (chip, info) - * - * Initialize the ALi M1535 chip. - */ -static int ali_ircc_init_53(ali_chip_t *chip, chipio_t *info) -{ - /* All controller information like I/O address, DMA channel, IRQ - * are set by BIOS - */ - - return 0; -} - -/* - * Function ali_ircc_probe_53 (chip, info) - * - * Probes for the ALi M1535D or M1535 - */ -static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info) -{ - int cfg_base = info->cfg_base; - int hi, low, reg; - - - /* Enter Configuration */ - outb(chip->entr1, cfg_base); - outb(chip->entr2, cfg_base); - - /* Select Logical Device 5 Registers (UART2) */ - outb(0x07, cfg_base); - outb(0x05, cfg_base+1); - - /* Read address control register */ - outb(0x60, cfg_base); - hi = inb(cfg_base+1); - outb(0x61, cfg_base); - low = inb(cfg_base+1); - info->fir_base = (hi<<8) + low; - - info->sir_base = info->fir_base; - - pr_debug("%s(), probing fir_base=0x%03x\n", __func__, info->fir_base); - - /* Read IRQ control register */ - outb(0x70, cfg_base); - reg = inb(cfg_base+1); - info->irq = reg & 0x0f; - pr_debug("%s(), probing irq=%d\n", __func__, info->irq); - - /* Read DMA channel */ - outb(0x74, cfg_base); - reg = inb(cfg_base+1); - info->dma = reg & 0x07; - - if(info->dma == 0x04) - net_warn_ratelimited("%s(), No DMA channel assigned !\n", - __func__); - else - pr_debug("%s(), probing dma=%d\n", __func__, info->dma); - - /* Read Enabled Status */ - outb(0x30, cfg_base); - reg = inb(cfg_base+1); - info->enabled = (reg & 0x80) && (reg & 0x01); - pr_debug("%s(), probing enabled=%d\n", __func__, info->enabled); - - /* Read Power Status */ - outb(0x22, cfg_base); - reg = inb(cfg_base+1); - info->suspended = (reg & 0x20); - pr_debug("%s(), probing suspended=%d\n", __func__, info->suspended); - - /* Exit configuration */ - outb(0xbb, cfg_base); - - - return 0; -} - -/* - * Function ali_ircc_setup (info) - * - * Set FIR FIFO and DMA Threshold - * Returns non-negative on success. - * - */ -static int ali_ircc_setup(chipio_t *info) -{ - unsigned char tmp; - int version; - int iobase = info->fir_base; - - - /* Locking comments : - * Most operations here need to be protected. We are called before - * the device instance is created in ali_ircc_open(), therefore - * nobody can bother us - Jean II */ - - /* Switch to FIR space */ - SIR2FIR(iobase); - - /* Master Reset */ - outb(0x40, iobase+FIR_MCR); // benjamin 2000/11/30 11:45AM - - /* Read FIR ID Version Register */ - switch_bank(iobase, BANK3); - version = inb(iobase+FIR_ID_VR); - - /* Should be 0x00 in the M1535/M1535D */ - if(version != 0x00) - { - net_err_ratelimited("%s, Wrong chip version %02x\n", - ALI_IRCC_DRIVER_NAME, version); - return -1; - } - - /* Set FIR FIFO Threshold Register */ - switch_bank(iobase, BANK1); - outb(RX_FIFO_Threshold, iobase+FIR_FIFO_TR); - - /* Set FIR DMA Threshold Register */ - outb(RX_DMA_Threshold, iobase+FIR_DMA_TR); - - /* CRC enable */ - switch_bank(iobase, BANK2); - outb(inb(iobase+FIR_IRDA_CR) | IRDA_CR_CRC, iobase+FIR_IRDA_CR); - - /* NDIS driver set TX Length here BANK2 Alias 3, Alias4*/ - - /* Switch to Bank 0 */ - switch_bank(iobase, BANK0); - - tmp = inb(iobase+FIR_LCR_B); - tmp &=~0x20; // disable SIP - tmp |= 0x80; // these two steps make RX mode - tmp &= 0xbf; - outb(tmp, iobase+FIR_LCR_B); - - /* Disable Interrupt */ - outb(0x00, iobase+FIR_IER); - - - /* Switch to SIR space */ - FIR2SIR(iobase); - - net_info_ratelimited("%s, driver loaded (Benjamin Kong)\n", - ALI_IRCC_DRIVER_NAME); - - /* Enable receive interrupts */ - // outb(UART_IER_RDI, iobase+UART_IER); //benjamin 2000/11/23 01:25PM - // Turn on the interrupts in ali_ircc_net_open - - - return 0; -} - -/* - * Function ali_ircc_read_dongle_id (int index, info) - * - * Try to read dongle identification. This procedure needs to be executed - * once after power-on/reset. It also needs to be used whenever you suspect - * that the user may have plugged/unplugged the IrDA Dongle. - */ -static int ali_ircc_read_dongle_id (int i, chipio_t *info) -{ - int dongle_id, reg; - int cfg_base = info->cfg_base; - - - /* Enter Configuration */ - outb(chips[i].entr1, cfg_base); - outb(chips[i].entr2, cfg_base); - - /* Select Logical Device 5 Registers (UART2) */ - outb(0x07, cfg_base); - outb(0x05, cfg_base+1); - - /* Read Dongle ID */ - outb(0xf0, cfg_base); - reg = inb(cfg_base+1); - dongle_id = ((reg>>6)&0x02) | ((reg>>5)&0x01); - pr_debug("%s(), probing dongle_id=%d, dongle_types=%s\n", - __func__, dongle_id, dongle_types[dongle_id]); - - /* Exit configuration */ - outb(0xbb, cfg_base); - - - return dongle_id; -} - -/* - * Function ali_ircc_interrupt (irq, dev_id, regs) - * - * An interrupt from the chip has arrived. Time to do some work - * - */ -static irqreturn_t ali_ircc_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct ali_ircc_cb *self; - int ret; - - - self = netdev_priv(dev); - - spin_lock(&self->lock); - - /* Dispatch interrupt handler for the current speed */ - if (self->io.speed > 115200) - ret = ali_ircc_fir_interrupt(self); - else - ret = ali_ircc_sir_interrupt(self); - - spin_unlock(&self->lock); - - return ret; -} -/* - * Function ali_ircc_fir_interrupt(irq, struct ali_ircc_cb *self) - * - * Handle MIR/FIR interrupt - * - */ -static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self) -{ - __u8 eir, OldMessageCount; - int iobase, tmp; - - - iobase = self->io.fir_base; - - switch_bank(iobase, BANK0); - self->InterruptID = inb(iobase+FIR_IIR); - self->BusStatus = inb(iobase+FIR_BSR); - - OldMessageCount = (self->LineStatus + 1) & 0x07; - self->LineStatus = inb(iobase+FIR_LSR); - //self->ier = inb(iobase+FIR_IER); 2000/12/1 04:32PM - eir = self->InterruptID & self->ier; /* Mask out the interesting ones */ - - pr_debug("%s(), self->InterruptID = %x\n", __func__, self->InterruptID); - pr_debug("%s(), self->LineStatus = %x\n", __func__, self->LineStatus); - pr_debug("%s(), self->ier = %x\n", __func__, self->ier); - pr_debug("%s(), eir = %x\n", __func__, eir); - - /* Disable interrupts */ - SetCOMInterrupts(self, FALSE); - - /* Tx or Rx Interrupt */ - - if (eir & IIR_EOM) - { - if (self->io.direction == IO_XMIT) /* TX */ - { - pr_debug("%s(), ******* IIR_EOM (Tx) *******\n", - __func__); - - if(ali_ircc_dma_xmit_complete(self)) - { - if (irda_device_txqueue_empty(self->netdev)) - { - /* Prepare for receive */ - ali_ircc_dma_receive(self); - self->ier = IER_EOM; - } - } - else - { - self->ier = IER_EOM; - } - - } - else /* RX */ - { - pr_debug("%s(), ******* IIR_EOM (Rx) *******\n", - __func__); - - if(OldMessageCount > ((self->LineStatus+1) & 0x07)) - { - self->rcvFramesOverflow = TRUE; - pr_debug("%s(), ******* self->rcvFramesOverflow = TRUE ********\n", - __func__); - } - - if (ali_ircc_dma_receive_complete(self)) - { - pr_debug("%s(), ******* receive complete ********\n", - __func__); - - self->ier = IER_EOM; - } - else - { - pr_debug("%s(), ******* Not receive complete ********\n", - __func__); - - self->ier = IER_EOM | IER_TIMER; - } - - } - } - /* Timer Interrupt */ - else if (eir & IIR_TIMER) - { - if(OldMessageCount > ((self->LineStatus+1) & 0x07)) - { - self->rcvFramesOverflow = TRUE; - pr_debug("%s(), ******* self->rcvFramesOverflow = TRUE *******\n", - __func__); - } - /* Disable Timer */ - switch_bank(iobase, BANK1); - tmp = inb(iobase+FIR_CR); - outb( tmp& ~CR_TIMER_EN, iobase+FIR_CR); - - /* Check if this is a Tx timer interrupt */ - if (self->io.direction == IO_XMIT) - { - ali_ircc_dma_xmit(self); - - /* Interrupt on EOM */ - self->ier = IER_EOM; - - } - else /* Rx */ - { - if(ali_ircc_dma_receive_complete(self)) - { - self->ier = IER_EOM; - } - else - { - self->ier = IER_EOM | IER_TIMER; - } - } - } - - /* Restore Interrupt */ - SetCOMInterrupts(self, TRUE); - - return IRQ_RETVAL(eir); -} - -/* - * Function ali_ircc_sir_interrupt (irq, self, eir) - * - * Handle SIR interrupt - * - */ -static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self) -{ - int iobase; - int iir, lsr; - - - iobase = self->io.sir_base; - - iir = inb(iobase+UART_IIR) & UART_IIR_ID; - if (iir) { - /* Clear interrupt */ - lsr = inb(iobase+UART_LSR); - - pr_debug("%s(), iir=%02x, lsr=%02x, iobase=%#x\n", - __func__, iir, lsr, iobase); - - switch (iir) - { - case UART_IIR_RLSI: - pr_debug("%s(), RLSI\n", __func__); - break; - case UART_IIR_RDI: - /* Receive interrupt */ - ali_ircc_sir_receive(self); - break; - case UART_IIR_THRI: - if (lsr & UART_LSR_THRE) - { - /* Transmitter ready for data */ - ali_ircc_sir_write_wakeup(self); - } - break; - default: - pr_debug("%s(), unhandled IIR=%#x\n", - __func__, iir); - break; - } - - } - - - return IRQ_RETVAL(iir); -} - - -/* - * Function ali_ircc_sir_receive (self) - * - * Receive one frame from the infrared port - * - */ -static void ali_ircc_sir_receive(struct ali_ircc_cb *self) -{ - int boguscount = 0; - int iobase; - - IRDA_ASSERT(self != NULL, return;); - - iobase = self->io.sir_base; - - /* - * Receive all characters in Rx FIFO, unwrap and unstuff them. - * async_unwrap_char will deliver all found frames - */ - do { - async_unwrap_char(self->netdev, &self->netdev->stats, &self->rx_buff, - inb(iobase+UART_RX)); - - /* Make sure we don't stay here too long */ - if (boguscount++ > 32) { - pr_debug("%s(), breaking!\n", __func__); - break; - } - } while (inb(iobase+UART_LSR) & UART_LSR_DR); - -} - -/* - * Function ali_ircc_sir_write_wakeup (tty) - * - * Called by the driver when there's room for more data. If we have - * more packets to send, we send them here. - * - */ -static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self) -{ - int actual = 0; - int iobase; - - IRDA_ASSERT(self != NULL, return;); - - - iobase = self->io.sir_base; - - /* Finished with frame? */ - if (self->tx_buff.len > 0) - { - /* Write data left in transmit buffer */ - actual = ali_ircc_sir_write(iobase, self->io.fifo_size, - self->tx_buff.data, self->tx_buff.len); - self->tx_buff.data += actual; - self->tx_buff.len -= actual; - } - else - { - if (self->new_speed) - { - /* We must wait until all data are gone */ - while(!(inb(iobase+UART_LSR) & UART_LSR_TEMT)) - pr_debug("%s(), UART_LSR_THRE\n", __func__); - - pr_debug("%s(), Changing speed! self->new_speed = %d\n", - __func__, self->new_speed); - ali_ircc_change_speed(self, self->new_speed); - self->new_speed = 0; - - // benjamin 2000/11/10 06:32PM - if (self->io.speed > 115200) - { - pr_debug("%s(), ali_ircc_change_speed from UART_LSR_TEMT\n", - __func__); - - self->ier = IER_EOM; - // SetCOMInterrupts(self, TRUE); - return; - } - } - else - { - netif_wake_queue(self->netdev); - } - - self->netdev->stats.tx_packets++; - - /* Turn on receive interrupts */ - outb(UART_IER_RDI, iobase+UART_IER); - } - -} - -static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud) -{ - struct net_device *dev = self->netdev; - int iobase; - - - pr_debug("%s(), setting speed = %d\n", __func__, baud); - - /* This function *must* be called with irq off and spin-lock. - * - Jean II */ - - iobase = self->io.fir_base; - - SetCOMInterrupts(self, FALSE); // 2000/11/24 11:43AM - - /* Go to MIR, FIR Speed */ - if (baud > 115200) - { - - - ali_ircc_fir_change_speed(self, baud); - - /* Install FIR xmit handler*/ - dev->netdev_ops = &ali_ircc_fir_ops; - - /* Enable Interuupt */ - self->ier = IER_EOM; // benjamin 2000/11/20 07:24PM - - /* Be ready for incoming frames */ - ali_ircc_dma_receive(self); // benajmin 2000/11/8 07:46PM not complete - } - /* Go to SIR Speed */ - else - { - ali_ircc_sir_change_speed(self, baud); - - /* Install SIR xmit handler*/ - dev->netdev_ops = &ali_ircc_sir_ops; - } - - - SetCOMInterrupts(self, TRUE); // 2000/11/24 11:43AM - - netif_wake_queue(self->netdev); - -} - -static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud) -{ - - int iobase; - struct ali_ircc_cb *self = priv; - struct net_device *dev; - - - IRDA_ASSERT(self != NULL, return;); - - dev = self->netdev; - iobase = self->io.fir_base; - - pr_debug("%s(), self->io.speed = %d, change to speed = %d\n", - __func__, self->io.speed, baud); - - /* Come from SIR speed */ - if(self->io.speed <=115200) - { - SIR2FIR(iobase); - } - - /* Update accounting for new speed */ - self->io.speed = baud; - - // Set Dongle Speed mode - ali_ircc_change_dongle_speed(self, baud); - -} - -/* - * Function ali_sir_change_speed (self, speed) - * - * Set speed of IrDA port to specified baudrate - * - */ -static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed) -{ - struct ali_ircc_cb *self = priv; - int iobase; - int fcr; /* FIFO control reg */ - int lcr; /* Line control reg */ - int divisor; - - - pr_debug("%s(), Setting speed to: %d\n", __func__, speed); - - IRDA_ASSERT(self != NULL, return;); - - iobase = self->io.sir_base; - - /* Come from MIR or FIR speed */ - if(self->io.speed >115200) - { - // Set Dongle Speed mode first - ali_ircc_change_dongle_speed(self, speed); - - FIR2SIR(iobase); - } - - // Clear Line and Auxiluary status registers 2000/11/24 11:47AM - - inb(iobase+UART_LSR); - inb(iobase+UART_SCR); - - /* Update accounting for new speed */ - self->io.speed = speed; - - divisor = 115200/speed; - - fcr = UART_FCR_ENABLE_FIFO; - - /* - * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and - * almost 1,7 ms at 19200 bps. At speeds above that we can just forget - * about this timeout since it will always be fast enough. - */ - if (self->io.speed < 38400) - fcr |= UART_FCR_TRIGGER_1; - else - fcr |= UART_FCR_TRIGGER_14; - - /* IrDA ports use 8N1 */ - lcr = UART_LCR_WLEN8; - - outb(UART_LCR_DLAB | lcr, iobase+UART_LCR); /* Set DLAB */ - outb(divisor & 0xff, iobase+UART_DLL); /* Set speed */ - outb(divisor >> 8, iobase+UART_DLM); - outb(lcr, iobase+UART_LCR); /* Set 8N1 */ - outb(fcr, iobase+UART_FCR); /* Enable FIFO's */ - - /* without this, the connection will be broken after come back from FIR speed, - but with this, the SIR connection is harder to established */ - outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR); -} - -static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed) -{ - - struct ali_ircc_cb *self = priv; - int iobase,dongle_id; - int tmp = 0; - - - iobase = self->io.fir_base; /* or iobase = self->io.sir_base; */ - dongle_id = self->io.dongle_id; - - /* We are already locked, no need to do it again */ - - pr_debug("%s(), Set Speed for %s , Speed = %d\n", - __func__, dongle_types[dongle_id], speed); - - switch_bank(iobase, BANK2); - tmp = inb(iobase+FIR_IRDA_CR); - - /* IBM type dongle */ - if(dongle_id == 0) - { - if(speed == 4000000) - { - // __ __ - // SD/MODE __| |__ __ - // __ __ - // IRTX __ __| |__ - // T1 T2 T3 T4 T5 - - tmp &= ~IRDA_CR_HDLC; // HDLC=0 - tmp |= IRDA_CR_CRC; // CRC=1 - - switch_bank(iobase, BANK2); - outb(tmp, iobase+FIR_IRDA_CR); - - // T1 -> SD/MODE:0 IRTX:0 - tmp &= ~0x09; - tmp |= 0x02; - outb(tmp, iobase+FIR_IRDA_CR); - udelay(2); - - // T2 -> SD/MODE:1 IRTX:0 - tmp &= ~0x01; - tmp |= 0x0a; - outb(tmp, iobase+FIR_IRDA_CR); - udelay(2); - - // T3 -> SD/MODE:1 IRTX:1 - tmp |= 0x0b; - outb(tmp, iobase+FIR_IRDA_CR); - udelay(2); - - // T4 -> SD/MODE:0 IRTX:1 - tmp &= ~0x08; - tmp |= 0x03; - outb(tmp, iobase+FIR_IRDA_CR); - udelay(2); - - // T5 -> SD/MODE:0 IRTX:0 - tmp &= ~0x09; - tmp |= 0x02; - outb(tmp, iobase+FIR_IRDA_CR); - udelay(2); - - // reset -> Normal TX output Signal - outb(tmp & ~0x02, iobase+FIR_IRDA_CR); - } - else /* speed <=1152000 */ - { - // __ - // SD/MODE __| |__ - // - // IRTX ________ - // T1 T2 T3 - - /* MIR 115200, 57600 */ - if (speed==1152000) - { - tmp |= 0xA0; //HDLC=1, 1.152Mbps=1 - } - else - { - tmp &=~0x80; //HDLC 0.576Mbps - tmp |= 0x20; //HDLC=1, - } - - tmp |= IRDA_CR_CRC; // CRC=1 - - switch_bank(iobase, BANK2); - outb(tmp, iobase+FIR_IRDA_CR); - - /* MIR 115200, 57600 */ - - //switch_bank(iobase, BANK2); - // T1 -> SD/MODE:0 IRTX:0 - tmp &= ~0x09; - tmp |= 0x02; - outb(tmp, iobase+FIR_IRDA_CR); - udelay(2); - - // T2 -> SD/MODE:1 IRTX:0 - tmp &= ~0x01; - tmp |= 0x0a; - outb(tmp, iobase+FIR_IRDA_CR); - - // T3 -> SD/MODE:0 IRTX:0 - tmp &= ~0x09; - tmp |= 0x02; - outb(tmp, iobase+FIR_IRDA_CR); - udelay(2); - - // reset -> Normal TX output Signal - outb(tmp & ~0x02, iobase+FIR_IRDA_CR); - } - } - else if (dongle_id == 1) /* HP HDSL-3600 */ - { - switch(speed) - { - case 4000000: - tmp &= ~IRDA_CR_HDLC; // HDLC=0 - break; - - case 1152000: - tmp |= 0xA0; // HDLC=1, 1.152Mbps=1 - break; - - case 576000: - tmp &=~0x80; // HDLC 0.576Mbps - tmp |= 0x20; // HDLC=1, - break; - } - - tmp |= IRDA_CR_CRC; // CRC=1 - - switch_bank(iobase, BANK2); - outb(tmp, iobase+FIR_IRDA_CR); - } - else /* HP HDSL-1100 */ - { - if(speed <= 115200) /* SIR */ - { - - tmp &= ~IRDA_CR_FIR_SIN; // HP sin select = 0 - - switch_bank(iobase, BANK2); - outb(tmp, iobase+FIR_IRDA_CR); - } - else /* MIR FIR */ - { - - switch(speed) - { - case 4000000: - tmp &= ~IRDA_CR_HDLC; // HDLC=0 - break; - - case 1152000: - tmp |= 0xA0; // HDLC=1, 1.152Mbps=1 - break; - - case 576000: - tmp &=~0x80; // HDLC 0.576Mbps - tmp |= 0x20; // HDLC=1, - break; - } - - tmp |= IRDA_CR_CRC; // CRC=1 - tmp |= IRDA_CR_FIR_SIN; // HP sin select = 1 - - switch_bank(iobase, BANK2); - outb(tmp, iobase+FIR_IRDA_CR); - } - } - - switch_bank(iobase, BANK0); - -} - -/* - * Function ali_ircc_sir_write (driver) - * - * Fill Tx FIFO with transmit data - * - */ -static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len) -{ - int actual = 0; - - - /* Tx FIFO should be empty! */ - if (!(inb(iobase+UART_LSR) & UART_LSR_THRE)) { - pr_debug("%s(), failed, fifo not empty!\n", __func__); - return 0; - } - - /* Fill FIFO with current frame */ - while ((fifo_size-- > 0) && (actual < len)) { - /* Transmit next byte */ - outb(buf[actual], iobase+UART_TX); - - actual++; - } - - return actual; -} - -/* - * Function ali_ircc_net_open (dev) - * - * Start the device - * - */ -static int ali_ircc_net_open(struct net_device *dev) -{ - struct ali_ircc_cb *self; - int iobase; - char hwname[32]; - - - IRDA_ASSERT(dev != NULL, return -1;); - - self = netdev_priv(dev); - - IRDA_ASSERT(self != NULL, return 0;); - - iobase = self->io.fir_base; - - /* Request IRQ and install Interrupt Handler */ - if (request_irq(self->io.irq, ali_ircc_interrupt, 0, dev->name, dev)) - { - net_warn_ratelimited("%s, unable to allocate irq=%d\n", - ALI_IRCC_DRIVER_NAME, self->io.irq); - return -EAGAIN; - } - - /* - * Always allocate the DMA channel after the IRQ, and clean up on - * failure. - */ - if (request_dma(self->io.dma, dev->name)) { - net_warn_ratelimited("%s, unable to allocate dma=%d\n", - ALI_IRCC_DRIVER_NAME, self->io.dma); - free_irq(self->io.irq, dev); - return -EAGAIN; - } - - /* Turn on interrups */ - outb(UART_IER_RDI , iobase+UART_IER); - - /* Ready to play! */ - netif_start_queue(dev); //benjamin by irport - - /* Give self a hardware name */ - sprintf(hwname, "ALI-FIR @ 0x%03x", self->io.fir_base); - - /* - * Open new IrLAP layer instance, now that everything should be - * initialized properly - */ - self->irlap = irlap_open(dev, &self->qos, hwname); - - - return 0; -} - -/* - * Function ali_ircc_net_close (dev) - * - * Stop the device - * - */ -static int ali_ircc_net_close(struct net_device *dev) -{ - - struct ali_ircc_cb *self; - //int iobase; - - - IRDA_ASSERT(dev != NULL, return -1;); - - self = netdev_priv(dev); - IRDA_ASSERT(self != NULL, return 0;); - - /* Stop device */ - netif_stop_queue(dev); - - /* Stop and remove instance of IrLAP */ - if (self->irlap) - irlap_close(self->irlap); - self->irlap = NULL; - - disable_dma(self->io.dma); - - /* Disable interrupts */ - SetCOMInterrupts(self, FALSE); - - free_irq(self->io.irq, dev); - free_dma(self->io.dma); - - - return 0; -} - -/* - * Function ali_ircc_fir_hard_xmit (skb, dev) - * - * Transmit the frame - * - */ -static netdev_tx_t ali_ircc_fir_hard_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct ali_ircc_cb *self; - unsigned long flags; - int iobase; - __u32 speed; - int mtt, diff; - - - self = netdev_priv(dev); - iobase = self->io.fir_base; - - netif_stop_queue(dev); - - /* Make sure tests *& speed change are atomic */ - spin_lock_irqsave(&self->lock, flags); - - /* Note : you should make sure that speed changes are not going - * to corrupt any outgoing frame. Look at nsc-ircc for the gory - * details - Jean II */ - - /* Check if we need to change the speed */ - speed = irda_get_next_speed(skb); - if ((speed != self->io.speed) && (speed != -1)) { - /* Check for empty frame */ - if (!skb->len) { - ali_ircc_change_speed(self, speed); - netif_trans_update(dev); - spin_unlock_irqrestore(&self->lock, flags); - dev_kfree_skb(skb); - return NETDEV_TX_OK; - } else - self->new_speed = speed; - } - - /* Register and copy this frame to DMA memory */ - self->tx_fifo.queue[self->tx_fifo.free].start = self->tx_fifo.tail; - self->tx_fifo.queue[self->tx_fifo.free].len = skb->len; - self->tx_fifo.tail += skb->len; - - dev->stats.tx_bytes += skb->len; - - skb_copy_from_linear_data(skb, self->tx_fifo.queue[self->tx_fifo.free].start, - skb->len); - self->tx_fifo.len++; - self->tx_fifo.free++; - - /* Start transmit only if there is currently no transmit going on */ - if (self->tx_fifo.len == 1) - { - /* Check if we must wait the min turn time or not */ - mtt = irda_get_mtt(skb); - - if (mtt) - { - /* Check how much time we have used already */ - diff = ktime_us_delta(ktime_get(), self->stamp); - /* self->stamp is set from ali_ircc_dma_receive_complete() */ - - pr_debug("%s(), ******* diff = %d *******\n", - __func__, diff); - - /* Check if the mtt is larger than the time we have - * already used by all the protocol processing - */ - if (mtt > diff) - { - mtt -= diff; - - /* - * Use timer if delay larger than 1000 us, and - * use udelay for smaller values which should - * be acceptable - */ - if (mtt > 500) - { - /* Adjust for timer resolution */ - mtt = (mtt+250) / 500; /* 4 discard, 5 get advanced, Let's round off */ - - pr_debug("%s(), ************** mtt = %d ***********\n", - __func__, mtt); - - /* Setup timer */ - if (mtt == 1) /* 500 us */ - { - switch_bank(iobase, BANK1); - outb(TIMER_IIR_500, iobase+FIR_TIMER_IIR); - } - else if (mtt == 2) /* 1 ms */ - { - switch_bank(iobase, BANK1); - outb(TIMER_IIR_1ms, iobase+FIR_TIMER_IIR); - } - else /* > 2ms -> 4ms */ - { - switch_bank(iobase, BANK1); - outb(TIMER_IIR_2ms, iobase+FIR_TIMER_IIR); - } - - - /* Start timer */ - outb(inb(iobase+FIR_CR) | CR_TIMER_EN, iobase+FIR_CR); - self->io.direction = IO_XMIT; - - /* Enable timer interrupt */ - self->ier = IER_TIMER; - SetCOMInterrupts(self, TRUE); - - /* Timer will take care of the rest */ - goto out; - } - else - udelay(mtt); - } // if (if (mtt > diff) - }// if (mtt) - - /* Enable EOM interrupt */ - self->ier = IER_EOM; - SetCOMInterrupts(self, TRUE); - - /* Transmit frame */ - ali_ircc_dma_xmit(self); - } // if (self->tx_fifo.len == 1) - - out: - - /* Not busy transmitting anymore if window is not full */ - if (self->tx_fifo.free < MAX_TX_WINDOW) - netif_wake_queue(self->netdev); - - /* Restore bank register */ - switch_bank(iobase, BANK0); - - netif_trans_update(dev); - spin_unlock_irqrestore(&self->lock, flags); - dev_kfree_skb(skb); - - return NETDEV_TX_OK; -} - - -static void ali_ircc_dma_xmit(struct ali_ircc_cb *self) -{ - int iobase, tmp; - unsigned char FIFO_OPTI, Hi, Lo; - - - - iobase = self->io.fir_base; - - /* FIFO threshold , this method comes from NDIS5 code */ - - if(self->tx_fifo.queue[self->tx_fifo.ptr].len < TX_FIFO_Threshold) - FIFO_OPTI = self->tx_fifo.queue[self->tx_fifo.ptr].len-1; - else - FIFO_OPTI = TX_FIFO_Threshold; - - /* Disable DMA */ - switch_bank(iobase, BANK1); - outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR); - - self->io.direction = IO_XMIT; - - irda_setup_dma(self->io.dma, - ((u8 *)self->tx_fifo.queue[self->tx_fifo.ptr].start - - self->tx_buff.head) + self->tx_buff_dma, - self->tx_fifo.queue[self->tx_fifo.ptr].len, - DMA_TX_MODE); - - /* Reset Tx FIFO */ - switch_bank(iobase, BANK0); - outb(LCR_A_FIFO_RESET, iobase+FIR_LCR_A); - - /* Set Tx FIFO threshold */ - if (self->fifo_opti_buf!=FIFO_OPTI) - { - switch_bank(iobase, BANK1); - outb(FIFO_OPTI, iobase+FIR_FIFO_TR) ; - self->fifo_opti_buf=FIFO_OPTI; - } - - /* Set Tx DMA threshold */ - switch_bank(iobase, BANK1); - outb(TX_DMA_Threshold, iobase+FIR_DMA_TR); - - /* Set max Tx frame size */ - Hi = (self->tx_fifo.queue[self->tx_fifo.ptr].len >> 8) & 0x0f; - Lo = self->tx_fifo.queue[self->tx_fifo.ptr].len & 0xff; - switch_bank(iobase, BANK2); - outb(Hi, iobase+FIR_TX_DSR_HI); - outb(Lo, iobase+FIR_TX_DSR_LO); - - /* Disable SIP , Disable Brick Wall (we don't support in TX mode), Change to TX mode */ - switch_bank(iobase, BANK0); - tmp = inb(iobase+FIR_LCR_B); - tmp &= ~0x20; // Disable SIP - outb(((unsigned char)(tmp & 0x3f) | LCR_B_TX_MODE) & ~LCR_B_BW, iobase+FIR_LCR_B); - pr_debug("%s(), *** Change to TX mode: FIR_LCR_B = 0x%x ***\n", - __func__, inb(iobase + FIR_LCR_B)); - - outb(0, iobase+FIR_LSR); - - /* Enable DMA and Burst Mode */ - switch_bank(iobase, BANK1); - outb(inb(iobase+FIR_CR) | CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR); - - switch_bank(iobase, BANK0); - -} - -static int ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self) -{ - int iobase; - int ret = TRUE; - - - iobase = self->io.fir_base; - - /* Disable DMA */ - switch_bank(iobase, BANK1); - outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR); - - /* Check for underrun! */ - switch_bank(iobase, BANK0); - if((inb(iobase+FIR_LSR) & LSR_FRAME_ABORT) == LSR_FRAME_ABORT) - - { - net_err_ratelimited("%s(), ********* LSR_FRAME_ABORT *********\n", - __func__); - self->netdev->stats.tx_errors++; - self->netdev->stats.tx_fifo_errors++; - } - else - { - self->netdev->stats.tx_packets++; - } - - /* Check if we need to change the speed */ - if (self->new_speed) - { - ali_ircc_change_speed(self, self->new_speed); - self->new_speed = 0; - } - - /* Finished with this frame, so prepare for next */ - self->tx_fifo.ptr++; - self->tx_fifo.len--; - - /* Any frames to be sent back-to-back? */ - if (self->tx_fifo.len) - { - ali_ircc_dma_xmit(self); - - /* Not finished yet! */ - ret = FALSE; - } - else - { /* Reset Tx FIFO info */ - self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0; - self->tx_fifo.tail = self->tx_buff.head; - } - - /* Make sure we have room for more frames */ - if (self->tx_fifo.free < MAX_TX_WINDOW) { - /* Not busy transmitting anymore */ - /* Tell the network layer, that we can accept more frames */ - netif_wake_queue(self->netdev); - } - - switch_bank(iobase, BANK0); - - return ret; -} - -/* - * Function ali_ircc_dma_receive (self) - * - * Get ready for receiving a frame. The device will initiate a DMA - * if it starts to receive a frame. - * - */ -static int ali_ircc_dma_receive(struct ali_ircc_cb *self) -{ - int iobase, tmp; - - - iobase = self->io.fir_base; - - /* Reset Tx FIFO info */ - self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0; - self->tx_fifo.tail = self->tx_buff.head; - - /* Disable DMA */ - switch_bank(iobase, BANK1); - outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR); - - /* Reset Message Count */ - switch_bank(iobase, BANK0); - outb(0x07, iobase+FIR_LSR); - - self->rcvFramesOverflow = FALSE; - - self->LineStatus = inb(iobase+FIR_LSR) ; - - /* Reset Rx FIFO info */ - self->io.direction = IO_RECV; - self->rx_buff.data = self->rx_buff.head; - - /* Reset Rx FIFO */ - // switch_bank(iobase, BANK0); - outb(LCR_A_FIFO_RESET, iobase+FIR_LCR_A); - - self->st_fifo.len = self->st_fifo.pending_bytes = 0; - self->st_fifo.tail = self->st_fifo.head = 0; - - irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize, - DMA_RX_MODE); - - /* Set Receive Mode,Brick Wall */ - //switch_bank(iobase, BANK0); - tmp = inb(iobase+FIR_LCR_B); - outb((unsigned char)(tmp &0x3f) | LCR_B_RX_MODE | LCR_B_BW , iobase + FIR_LCR_B); // 2000/12/1 05:16PM - pr_debug("%s(), *** Change To RX mode: FIR_LCR_B = 0x%x ***\n", - __func__, inb(iobase + FIR_LCR_B)); - - /* Set Rx Threshold */ - switch_bank(iobase, BANK1); - outb(RX_FIFO_Threshold, iobase+FIR_FIFO_TR); - outb(RX_DMA_Threshold, iobase+FIR_DMA_TR); - - /* Enable DMA and Burst Mode */ - // switch_bank(iobase, BANK1); - outb(CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR); - - switch_bank(iobase, BANK0); - return 0; -} - -static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self) -{ - struct st_fifo *st_fifo; - struct sk_buff *skb; - __u8 status, MessageCount; - int len, i, iobase, val; - - st_fifo = &self->st_fifo; - iobase = self->io.fir_base; - - switch_bank(iobase, BANK0); - MessageCount = inb(iobase+ FIR_LSR)&0x07; - - if (MessageCount > 0) - pr_debug("%s(), Message count = %d\n", __func__, MessageCount); - - for (i=0; i<=MessageCount; i++) - { - /* Bank 0 */ - switch_bank(iobase, BANK0); - status = inb(iobase+FIR_LSR); - - switch_bank(iobase, BANK2); - len = inb(iobase+FIR_RX_DSR_HI) & 0x0f; - len = len << 8; - len |= inb(iobase+FIR_RX_DSR_LO); - - pr_debug("%s(), RX Length = 0x%.2x,\n", __func__ , len); - pr_debug("%s(), RX Status = 0x%.2x,\n", __func__ , status); - - if (st_fifo->tail >= MAX_RX_WINDOW) { - pr_debug("%s(), window is full!\n", __func__); - continue; - } - - st_fifo->entries[st_fifo->tail].status = status; - st_fifo->entries[st_fifo->tail].len = len; - st_fifo->pending_bytes += len; - st_fifo->tail++; - st_fifo->len++; - } - - for (i=0; i<=MessageCount; i++) - { - /* Get first entry */ - status = st_fifo->entries[st_fifo->head].status; - len = st_fifo->entries[st_fifo->head].len; - st_fifo->pending_bytes -= len; - st_fifo->head++; - st_fifo->len--; - - /* Check for errors */ - if ((status & 0xd8) || self->rcvFramesOverflow || (len==0)) - { - pr_debug("%s(), ************* RX Errors ************\n", - __func__); - - /* Skip frame */ - self->netdev->stats.rx_errors++; - - self->rx_buff.data += len; - - if (status & LSR_FIFO_UR) - { - self->netdev->stats.rx_frame_errors++; - pr_debug("%s(), ************* FIFO Errors ************\n", - __func__); - } - if (status & LSR_FRAME_ERROR) - { - self->netdev->stats.rx_frame_errors++; - pr_debug("%s(), ************* FRAME Errors ************\n", - __func__); - } - - if (status & LSR_CRC_ERROR) - { - self->netdev->stats.rx_crc_errors++; - pr_debug("%s(), ************* CRC Errors ************\n", - __func__); - } - - if(self->rcvFramesOverflow) - { - self->netdev->stats.rx_frame_errors++; - pr_debug("%s(), ************* Overran DMA buffer ************\n", - __func__); - } - if(len == 0) - { - self->netdev->stats.rx_frame_errors++; - pr_debug("%s(), ********** Receive Frame Size = 0 *********\n", - __func__); - } - } - else - { - - if (st_fifo->pending_bytes < 32) - { - switch_bank(iobase, BANK0); - val = inb(iobase+FIR_BSR); - if ((val& BSR_FIFO_NOT_EMPTY)== 0x80) - { - pr_debug("%s(), ************* BSR_FIFO_NOT_EMPTY ************\n", - __func__); - - /* Put this entry back in fifo */ - st_fifo->head--; - st_fifo->len++; - st_fifo->pending_bytes += len; - st_fifo->entries[st_fifo->head].status = status; - st_fifo->entries[st_fifo->head].len = len; - - /* - * DMA not finished yet, so try again - * later, set timer value, resolution - * 500 us - */ - - switch_bank(iobase, BANK1); - outb(TIMER_IIR_500, iobase+FIR_TIMER_IIR); // 2001/1/2 05:07PM - - /* Enable Timer */ - outb(inb(iobase+FIR_CR) | CR_TIMER_EN, iobase+FIR_CR); - - return FALSE; /* I'll be back! */ - } - } - - /* - * Remember the time we received this frame, so we can - * reduce the min turn time a bit since we will know - * how much time we have used for protocol processing - */ - self->stamp = ktime_get(); - - skb = dev_alloc_skb(len+1); - if (!skb) { - self->netdev->stats.rx_dropped++; - - return FALSE; - } - - /* Make sure IP header gets aligned */ - skb_reserve(skb, 1); - - /* Copy frame without CRC, CRC is removed by hardware*/ - skb_put(skb, len); - skb_copy_to_linear_data(skb, self->rx_buff.data, len); - - /* Move to next frame */ - self->rx_buff.data += len; - self->netdev->stats.rx_bytes += len; - self->netdev->stats.rx_packets++; - - skb->dev = self->netdev; - skb_reset_mac_header(skb); - skb->protocol = htons(ETH_P_IRDA); - netif_rx(skb); - } - } - - switch_bank(iobase, BANK0); - - return TRUE; -} - - - -/* - * Function ali_ircc_sir_hard_xmit (skb, dev) - * - * Transmit the frame! - * - */ -static netdev_tx_t ali_ircc_sir_hard_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct ali_ircc_cb *self; - unsigned long flags; - int iobase; - __u32 speed; - - - IRDA_ASSERT(dev != NULL, return NETDEV_TX_OK;); - - self = netdev_priv(dev); - IRDA_ASSERT(self != NULL, return NETDEV_TX_OK;); - - iobase = self->io.sir_base; - - netif_stop_queue(dev); - - /* Make sure tests *& speed change are atomic */ - spin_lock_irqsave(&self->lock, flags); - - /* Note : you should make sure that speed changes are not going - * to corrupt any outgoing frame. Look at nsc-ircc for the gory - * details - Jean II */ - - /* Check if we need to change the speed */ - speed = irda_get_next_speed(skb); - if ((speed != self->io.speed) && (speed != -1)) { - /* Check for empty frame */ - if (!skb->len) { - ali_ircc_change_speed(self, speed); - netif_trans_update(dev); - spin_unlock_irqrestore(&self->lock, flags); - dev_kfree_skb(skb); - return NETDEV_TX_OK; - } else - self->new_speed = speed; - } - - /* Init tx buffer */ - self->tx_buff.data = self->tx_buff.head; - - /* Copy skb to tx_buff while wrapping, stuffing and making CRC */ - self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data, - self->tx_buff.truesize); - - self->netdev->stats.tx_bytes += self->tx_buff.len; - - /* Turn on transmit finished interrupt. Will fire immediately! */ - outb(UART_IER_THRI, iobase+UART_IER); - - netif_trans_update(dev); - spin_unlock_irqrestore(&self->lock, flags); - - dev_kfree_skb(skb); - - - return NETDEV_TX_OK; -} - - -/* - * Function ali_ircc_net_ioctl (dev, rq, cmd) - * - * Process IOCTL commands for this device - * - */ -static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - struct if_irda_req *irq = (struct if_irda_req *) rq; - struct ali_ircc_cb *self; - unsigned long flags; - int ret = 0; - - - IRDA_ASSERT(dev != NULL, return -1;); - - self = netdev_priv(dev); - - IRDA_ASSERT(self != NULL, return -1;); - - pr_debug("%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd); - - switch (cmd) { - case SIOCSBANDWIDTH: /* Set bandwidth */ - pr_debug("%s(), SIOCSBANDWIDTH\n", __func__); - /* - * This function will also be used by IrLAP to change the - * speed, so we still must allow for speed change within - * interrupt context. - */ - if (!in_interrupt() && !capable(CAP_NET_ADMIN)) - return -EPERM; - - spin_lock_irqsave(&self->lock, flags); - ali_ircc_change_speed(self, irq->ifr_baudrate); - spin_unlock_irqrestore(&self->lock, flags); - break; - case SIOCSMEDIABUSY: /* Set media busy */ - pr_debug("%s(), SIOCSMEDIABUSY\n", __func__); - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - irda_device_set_media_busy(self->netdev, TRUE); - break; - case SIOCGRECEIVING: /* Check if we are receiving right now */ - pr_debug("%s(), SIOCGRECEIVING\n", __func__); - /* This is protected */ - irq->ifr_receiving = ali_ircc_is_receiving(self); - break; - default: - ret = -EOPNOTSUPP; - } - - - return ret; -} - -/* - * Function ali_ircc_is_receiving (self) - * - * Return TRUE is we are currently receiving a frame - * - */ -static int ali_ircc_is_receiving(struct ali_ircc_cb *self) -{ - unsigned long flags; - int status = FALSE; - int iobase; - - - IRDA_ASSERT(self != NULL, return FALSE;); - - spin_lock_irqsave(&self->lock, flags); - - if (self->io.speed > 115200) - { - iobase = self->io.fir_base; - - switch_bank(iobase, BANK1); - if((inb(iobase+FIR_FIFO_FR) & 0x3f) != 0) - { - /* We are receiving something */ - pr_debug("%s(), We are receiving something\n", - __func__); - status = TRUE; - } - switch_bank(iobase, BANK0); - } - else - { - status = (self->rx_buff.state != OUTSIDE_FRAME); - } - - spin_unlock_irqrestore(&self->lock, flags); - - - return status; -} - -static int ali_ircc_suspend(struct platform_device *dev, pm_message_t state) -{ - struct ali_ircc_cb *self = platform_get_drvdata(dev); - - net_info_ratelimited("%s, Suspending\n", ALI_IRCC_DRIVER_NAME); - - if (self->io.suspended) - return 0; - - ali_ircc_net_close(self->netdev); - - self->io.suspended = 1; - - return 0; -} - -static int ali_ircc_resume(struct platform_device *dev) -{ - struct ali_ircc_cb *self = platform_get_drvdata(dev); - - if (!self->io.suspended) - return 0; - - ali_ircc_net_open(self->netdev); - - net_info_ratelimited("%s, Waking up\n", ALI_IRCC_DRIVER_NAME); - - self->io.suspended = 0; - - return 0; -} - -/* ALi Chip Function */ - -static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable) -{ - - unsigned char newMask; - - int iobase = self->io.fir_base; /* or sir_base */ - - pr_debug("%s(), -------- Start -------- ( Enable = %d )\n", - __func__, enable); - - /* Enable the interrupt which we wish to */ - if (enable){ - if (self->io.direction == IO_XMIT) - { - if (self->io.speed > 115200) /* FIR, MIR */ - { - newMask = self->ier; - } - else /* SIR */ - { - newMask = UART_IER_THRI | UART_IER_RDI; - } - } - else { - if (self->io.speed > 115200) /* FIR, MIR */ - { - newMask = self->ier; - } - else /* SIR */ - { - newMask = UART_IER_RDI; - } - } - } - else /* Disable all the interrupts */ - { - newMask = 0x00; - - } - - //SIR and FIR has different registers - if (self->io.speed > 115200) - { - switch_bank(iobase, BANK0); - outb(newMask, iobase+FIR_IER); - } - else - outb(newMask, iobase+UART_IER); - -} - -static void SIR2FIR(int iobase) -{ - //unsigned char tmp; - - - /* Already protected (change_speed() or setup()), no need to lock. - * Jean II */ - - outb(0x28, iobase+UART_MCR); - outb(0x68, iobase+UART_MCR); - outb(0x88, iobase+UART_MCR); - - outb(0x60, iobase+FIR_MCR); /* Master Reset */ - outb(0x20, iobase+FIR_MCR); /* Master Interrupt Enable */ - - //tmp = inb(iobase+FIR_LCR_B); /* SIP enable */ - //tmp |= 0x20; - //outb(tmp, iobase+FIR_LCR_B); - -} - -static void FIR2SIR(int iobase) -{ - unsigned char val; - - - /* Already protected (change_speed() or setup()), no need to lock. - * Jean II */ - - outb(0x20, iobase+FIR_MCR); /* IRQ to low */ - outb(0x00, iobase+UART_IER); - - outb(0xA0, iobase+FIR_MCR); /* Don't set master reset */ - outb(0x00, iobase+UART_FCR); - outb(0x07, iobase+UART_FCR); - - val = inb(iobase+UART_RX); - val = inb(iobase+UART_LSR); - val = inb(iobase+UART_MSR); - -} - -MODULE_AUTHOR("Benjamin Kong <benjamin_kong@ali.com.tw>"); -MODULE_DESCRIPTION("ALi FIR Controller Driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" ALI_IRCC_DRIVER_NAME); - - -module_param_hw_array(io, int, ioport, NULL, 0); -MODULE_PARM_DESC(io, "Base I/O addresses"); -module_param_hw_array(irq, int, irq, NULL, 0); -MODULE_PARM_DESC(irq, "IRQ lines"); -module_param_hw_array(dma, int, dma, NULL, 0); -MODULE_PARM_DESC(dma, "DMA channels"); - -module_init(ali_ircc_init); -module_exit(ali_ircc_cleanup); |